Journal of Dentistry

Article	Citations
A novel AI-driven tool for automated root canal segmentation of single and bi-rooted teeth on cone-beam computed tomography	240
Digital planning of prosthetic finalization in a TMD patient	158
In vitro remineralization assessment of enamel subsurface lesions using different percentages of surface reaction-type pre-reacted glass-ionomer containing gum-based material	113
Virtual planning and volumetric evaluation of wound healing following regenerative surgical treatment of intrabony periodontal defects	113
Tooth loss over 13 years of follow-up: Can regular dental visits reduce racial and socioeconomic inequalities?	95
Are S-PRG composites able to resist against erosive and abrasive challenges and protect surrounding enamel in situ?	92
Impact of angle on photothermal radiometry and modulated luminescence (PTR/LUM) value	90
How palatal vault morphology and screw length influence the accuracy of dynamic computer-guided orthodontic miniscrew insertion. A prospective clinical study	86
Development of a survey-based stacked ensemble predictive model for autonomy preferences in patients with periodontal disease	86
Effectiveness of bioactive resin materials in preventing secondary caries and retention loss in direct posterior restorations: A systematic review and meta-analysis	83
Exploring the use of preprints in dentistry	83
The Effectiveness of Platelet Rich Fibrin in Alveolar Ridge Reconstructive or Guided Bone Regenerative Procedures: A Systematic Review and Meta-Analysis	83
Digital dentistry	79
Influence of periodic polyphenol treatment on the anti-erosive potential of the acquired enamel pellicle—A qualitative exploratory study	77
Antibiofilm properties, cytotoxicity, and effect on protease activity of antibiotics and EGCG-based medications for endodontic purposes	77
Erosion protective properties of the enamel pellicle in-situ	76
Full arch accuracy of intraoral scanners with different acquisition technologies: An in vitro study	67
Assessing diagnostic accuracy and monitoring of caries progression using optical coherence tomography (OCT): A systematic review	67
Prevalence of tooth wear and associated factors: A birth cohort study	65
Healing outcomes of open versus closed flap procedures for collagen membrane coverage following immediate dental implant placements with simultaneous guided tissue regeneration	62
Bruxism as a new risk factor of musculo-skeletal disorders?	62
Prolonged polymerization of a universal adhesive in non-carious cervical lesions: 36-month double-blind randomized clinical trial	61
Effect of topical applications containing surface pre-reacted glass-ionomer filler on dental hard tissues-A systematic review	60
Finite element analysis of stress distribution in autotransplanted molars	58
Dental plaque quantitation by light induced fluorescence technology in exclusive Electronic Nicotine Delivery Systems (ENDS) users	58

A novel digital technique for maintaining maxillomandibular relations in fixed prosthetic rehabilitations	58
Retentive force of conical crowns combining zirconia and fiber-reinforced composite	55
Comparison of intraoral scanning and CBCT to generate digital and 3D-printed casts by fused deposition modeling and digital light processing	54
In vitro scan accuracy and time efficiency in various implant-supported fixed partial denture situations	54
Effect of prefabricated auxiliary devices in different optical properties and shapes on the accuracy of intraoral scanning of the edentulous arch with multiple implants: An in-vitro study	53
Visual and haptic perceptibility of 3D printed skeletal models in orthognathic surgery	53
Comparison of the colour accuracy of a single-lens reflex camera and a smartphone camera in a clinical context	50
Investigation of in vitro odonto/osteogenic capacity of cannabidiol on human dental pulp cell	50
Effect of topical application of ibuprofen/arginine on the in-office bleaching-induced tooth sensitivity: A randomized, triple-blind controlled trial	49
Whitening efficacy of activated charcoal-based products: A single-blind randomized controlled clinical trial	49
Formulation of arginine-loaded mesoporous silica nanoparticles (Arg@MSNs) modified orthodontic adhesive	49
A modified scan technique for multiple abutment teeth using the trim and lock function	48
Effect of continuous vs sequential chelation on the mechanical properties of root dentin: An ex vivo study	48
Accuracy of digital and conventional implant impressions in edentulous jaws: A clinical comparative study	47
Bisphenol A release from short-term degraded resin-based dental materials	47
Generative deep learning approaches for the design of dental restorations: A narrative review	45
Efficacy of adjunctive local periodontal treatment for type 2 diabetes mellitus patients with periodontitis: A systematic review and network meta-analysis	45
Trajectories of child free sugars intake and dental caries - a population-based birth cohort study	44
Morphology of pulpal mineralizations: A scoping review	44
Influence of rescanning mesh holes on the accuracy of an intraoral scanner: An in vivo study	43
Deep learning-based segmentation of dental implants on cone-beam computed tomography images: A validation study	41
Influence of customized over-scan body rings on the intraoral scanning effectiveness of a multiple implant edentulous mandibular model	41
Digital workflow for a direct restorative procedure using a 4D virtual articulator	40
Real-world effectiveness of national pit and fissure sealants program in Taiwan	40
Construction of dentin-on-a-chip based on microfluidic technology and tissue engineering	40
Artificial intelligence serving pre-surgical digital implant planning: A scoping review	40
Facially driven esthetic rehabilitation and bite elevation for a patient with worn front teeth: a case report	40
Bruxism and Lifestyle Interaction: an Observational Study	39
Does curve of Spee affect the precision of 3D-printed curvature-adaptive splints?	39
Socio-economic status, psychosocial factors, health behaviours and incidence of dental caries in 12-year-old children living in deprived communities in Manaus, Brazil	38
‘Thermo-mechanical behavior of alternative material combinations for full-arch implant-supported hybrid prostheses with short cantilevers’	38
Effects of an MDP-based surface cleaner on dentin structure, morphology and nanomechanical properties	38
Extra-oral assessment of conventional and CAD-CAM complete denture appearance by dental professionals and CRDP wearers: A randomized survey	37
The use of mouthwash containing trimetaphosphate as an adjunct therapy to fluoridated toothpaste reduces enamel demineralization	37
In situ remineralization of enamel caries lesions with a toothpaste supplemented with fluoride, amorphous calcium phosphate casein phosphopeptide and trimetaphosphate	37
Trueness and precision of a handheld, a desktop and a mobile 3D face scanning system: An in vitro study	36
Predentine is not a reliable barrier against internal root resorption in the presence of inflammation	36
A novel post-processing strategy to improve the accuracy of complete-arch intraoral scanning for implants: an in vitro study	34
Editorial Board	33
Analog and digital complete denture bases accuracy and dimensional stability: An in-vitro evaluation at 24 hours and 6 months	33
Teledentistry with the dental office's mobile application	33
Impact of modifications on the characteristics of salivary pellicle on dental hard tissue: a scoping review	33
Can patients detect peri‑implant mucosal inflammation? Results from a multicentre randomized trial	33
Editorial Board	33
Highly targeted electrochemical disruption of microbes with minimal disruption to pulp cells	32
Environmental impact of the supervised toothbrushing programme amongst children in Scotland	32
Automated orofacial virtual patient creation: A proof of concept	32
Effect of silver diamine fluoride and nano silver fluoride on oral health-related quality of life of children with early childhood caries: A randomized clinical trial	32
Surface properties and Streptococcus mutans biofilm adhesion of ion-releasing resin-based composite materials	32
Association between oral health and cognitive impairment in older adults: Insights from a Six-year prospective cohort study	32

Anamnestic risk factors for erosive tooth wear: Systematic review, mapping, and meta-analysis	32
Current and future trends in the teaching of removable partial dentures in dental schools in Malaysia: A cross sectional study	32
Assessing dentists’ awareness of the orthodontic–restorative interface	32
Characterisation of experimental flowable composites containing fluoride-doped calcium phosphates as promising remineralising materials	31
Zirconia-reinforced lithium silicate (ZLS) mechanical and biological properties: A literature review	31
Clinical performance of full-arch implant-supported fixed restorations made of monolithic zirconia luted to a titanium bar: A retrospective study with a mean follow-up of 16 months	31
Customized-3D zirconia barriers for guided bone regeneration (GBR): clinical and histological findings from a proof-of-concept case series	31
Prolonged post-washing in ethanol decreases bond strength of additively manufactured crown materials	31
Robotics in endodontics: A comprehensive scoping review	31
Guided implant surgery with R2Gate®: A multicenter retrospective clinical study with 1 year of follow-up	31
Corrigendum to ‘Influence of the implant scan body bevel location, implant angulation and position on intraoral scanning accuracy: An in vitro study’ [Journal of Dentistry volume 121 (2022) 104122]	30
Core outcomes measures in dental computer vision studies (DentalCOMS)	30
Association between maxillary sinus floor perforation by dental implants and mucosal thickening: A cone-beam computed tomography study	30
Early occlusal caries detection using targeted fluorescent starch nanoparticles	30
3D-printed one-piece versus two-piece orthodontic clear aligner attachments bonded with provisional crowns: A proof of concept	29
Editorial Board	28
Lipopeptide biosurfactant as a potential root canal irrigation agent: Antimicrobial and anti-biofilm evaluation	28
Contemporary treatment techniques for excessive gingival display caused by altered passive eruption or lip hypermobility	28
Effect of different wound closure interventions on the clinical outcomes following immediate implant placement in the aesthetic area: A network meta-analysis based on thirty-four studies	28
Quality of nutritional uptake of community-dwelling, care-dependent older adults in Zurich	28
The diagnostic efficacy of quantitative light-induced fluorescence in detection of dental caries of primary teeth	27
Inter- and intra-variability in tooth wear progression at surface-, tooth- and patient-level over a period of three years: A cohort study	27
Is tele-diagnosis of dental conditions reliable during COVID-19 pandemic? Agreement between tentative diagnosis via synchronous audioconferencing and definitive clinical diagnosis	27
Chairside virtual patient protocol. Part 1: Free vs Guided face scan protocol	27
The relationship between self-efficacy and oral health status of older adults	27
Accuracy of surgical templates with and without metallic sleeves in case of partial arch restorations: A systematic review	27
Effect of artificial landmarks of the prefabricated auxiliary devices located at different arch positions on the accuracy of complete-arch edentulous digital implant scanning: An in-vitro study	27
Clinical outcomes of novel CAD/CAM-designed functional space maintainers produced via additive and subtractive methods: A randomized controlled trial	26
Spin and reporting in systematic reviews with meta-analysis of randomized clinical trials in restorative dentistry	26
“How obsessive are dentists?”––A personality styles & disorder inventory based prospective, controlled study	26
Impact of scanning interruptions on accuracy of implant-supported full-arch scans: An in-vitro pilot study	25
Automated pediatric TMJ articular disk identification and displacement classification in MRI with machine learning	25
Editorial Board	25
In vitro effect of fluoride gels supplemented with nano-sized sodium trimetaphosphate on enamel erosive wear	24
Editorial Board	24
Orthodontic Treatment and Central Incisors: a Study by CBCT Analysis	24
Association between non-carious cervical lesions, dentin hypersensitivity and anxiety in young adults: A cross-sectional study	24
Quantifying composite restoration removal and cavity re-preparation using novel region-specific volumetric analysis	24
Guided maxillary full-arch implant rehabilitation using a novel chrome cobalt alveolar bone reduction guide	24
Full versus semi-digital workflow in case of surgical management of mandibular cyst	24
In situ evaluation of 200 ppm fluoride toothpaste content trimetaphosphate, xylitol and erythritol on enamel demineralization and dental biofilm	24
Digital records for diagnosis and treatment plan in a TMD patient	24
Survival, technical and biological outcome of fixed tooth- and implant-supported restorations: A retrospective analysis of a patient cohort treated in an undergraduate dental education program	23
Anti-bacterial and anti-microbial aging effects of resin-based sealant modified by quaternary ammonium monomers	23
Degree of conversion of dual-cured composite luting agents: The effect of transition metal-based touch-cure activators	23
Prediction of pulp exposure before caries excavation using artificial intelligence: Deep learning-based image data versus standard dental radiographs	23
Comparative proteomic analysis of saliva from chewing tobacco users and oral cancer patients reveals shared biomarkers: A case control observational study	23
Thematic analysis of perceptions from both patients and dental students on a digital clinical decision aid in prosthodontics: A qualitative study	23
Synthetic, non-person related panoramic radiographs created by generative adversarial networks in research, clinical, and teaching applications	23
Artificial intelligence for osteoporosis detection on panoramic radiography: A systematic review and meta analysis	22
Assessment of silver-copper co-loaded mesoporous bioactive glass as an advanced pulp-capping material	22
Comparing the accuracy of full-arch implant impressions using the conventional technique and digital scans with and without prefabricated landmarks in the mandible: An in vitro study	22
Relevant optical properties for gingiva-colored resin-based composites	21
Influence of bleaching gels formulated with nano-sized sodium trimetaphosphate and fluoride on the physicochemical, mechanical, and morphological properties of dental enamel	21
Corrigendum to “Bonding to dentin using an experimental zirconium oxynitrate etchant” [J. Dent. 108 (2021) 103641]	21
Impact of the occlusal contact pattern and occlusal adjustment on the wear and stability of crowns	21
The subsurface lesion in erosive tooth wear	21
Accuracy of the intaglio surface of 3D-printed hybrid resin-ceramic crowns, veneers and table-tops: An in vitro study	21
Temporomandibular joint segmentation in MRI images using deep learning	21
Artificial intelligence for caries detection: Randomized trial	21
Erratum to ‘How French dentists manage defective restorations: evidence from ReCOL the French dental practice-based research network – a survey study’ [Journal of Dentistry 125C (2022) 104244]	21
The Chinese version of the brief pain inventory–Facial (BPI-F) among different populations: Factor structure and measurement invariance	20
Prediction of post-traumatic neuropathy following impacted mandibular third molar removal	20
The impact of mandibular partial edentulous distal extension on virtual occlusal record accuracy when using two different intraoral scanners: An in vitro analysis	20
MMP inhibition, marginal integrity and cytotoxicity of zinc-releasing GIC	20
Comparison between intraoral scanner and spectrophotometer shade matching: A systematic review and meta-analysis	20
The Universal scanning guide	20
Effects of ultraviolet weathering aging on the color stability and biocompatibility of various computer-aided design and computer-aided manufacturing glass–ceramic materials	20
Alterations in salivary biomarkers in relation to periodontal health and obesity among Hong Kong adolescents	20
Brazilian primary dental care in a universal health system: Challenges for training and practice	20
Subgingival microbial changes in Down Syndrome adults with periodontitis after chlorhexidine adjunct non-surgical therapy and monthly recalls–A 12-month case series study	20
Complex rehabilitation of erosive tooth wear with digital workflows	20
Editorial Board	20
Influence of thermo-mechanical aging on fracture resistance and wear of digitally standardized chairside computer-aided-designed/computer-assisted-manufactured restorations	20
Impact of artificial intelligence on dentists’ gaze during caries detection: A randomized controlled trial	20
Influence of a D-enantiomeric peptide on the anticorrosion ability of titanium with different surface roughness against Streptococcus mutans biofilms	20
Innovative Method For Simplifying Dual Scan Technique	20
A randomized, controlled clinical trial of digitally planned static guided implant placement with 2 years of follow-up	20
Anti-biofilm activity of chlorhexidine-releasing elastomerics against dental microcosm biofilms	19
Stain removal, abrasion and anticaries properties of a novel low abrasion dentifrice containing micro-fibrillated cellulose: in vitro assessments	19

Chairside virtual patient protocol. Part 2: Management of multiple face scans and alignment predictability	19
Proteomic profile of in situ acquired pellicle on tooth and restorative material surfaces	19
Full-arch restoration with the NEXUS IOS® system: A retrospective clinical evaluation of 37 restorations after a one year of follow-up	19
Survival Analysis and Cost Effectiveness of Silver Modified Atraumatic Restorative Treatment (SMART) and ART Occlusal Restorations in Primary Molars: a randomized controlled trial	19
Trueness and precision of complete arch dentate digital models produced by intraoral and desktop scanners: An ex-vivo study	19
Impact of microabrasion and a remineralizing agent before in-office bleaching on hydrogen peroxide permeability, color alteration, and enamel morphology	19
Teaching repair versus replacement of direct composite resin restorations: A cross-sectional study across dental schools in Malaysia	19
The efficacy and safety of an enzyme-containing lozenge for dental biofilm control—a randomized controlled pilot trial	19
Efficacy of XP-endo instruments in removing 54 month-aged root canal filling material from mandibular molars	18
The impact of priming on dentally induced social judgements: An experimental study	18
Feasibility of using two generative AI models for teeth reconstruction	18
Global and regional trends in prevalence of untreated caries in permanent teeth: Age-period-cohort analysis from 1990 to 2019 and projections until 2049	18
Scan accuracy of recently introduced wireless intraoral scanners in different fixed partial denture situations	18
Improving the measurement of oral health-related quality of life: Rasch model of the oral health impact profile-14	18
Optical characteristics of experimental dental composite resin materials	18
Publication bias in randomized controlled trials in dentistry. What factors affect statistical significance of outcomes?	18
Reproducibility of the digital palate in forensic investigations: a two-year retrospective cohort study on twins	18
Antibiofilm and mechanical properties of silver nanowire-modified glass ionomer cement	18
Clinical evaluation of posterior zirconia-based and porcelain-fused-to-metal crowns with a vertical preparation technique: an up to 5-year retrospective cohort study	18
Gastrointestinal cholecystokinin signaling pathway drugs modulate osteogenic/cementogenic differentiation of human periodontal ligament stem cells	18
Clinical precision of Aoralscan 3 and Emerald S on the palatal and dentition areas: Evaluation for forensic applications	18
Microstructural dependence of mechanical properties and their relationship in modern resin-based composite materials	18
Teaching of posterior composites for the restoration of permanent teeth in undergraduate dental training programmes: Systematic review and meta-analysis	17
Evaluation of preheating methods for bulk-fill thermoviscous composite in non-carious cervical lesions: A 24-month randomized controlled trial	17
Evaluation of low-crystallinity apatite as a novel synthetic bone graft material: In vivo and in vitro analysis	17
Esthetic Rehabilitation of Patient with Multiple Diastema following Orthodontic Treatment and Maxillofacial Surgery: a Case Report	17
Immunorecognition of Streptococcus mutans secreted proteins protects against caries by limiting tooth adhesion	17
Tricalcium phosphate (-containing) biomaterials in the treatment of periodontal infra-bony defects: A systematic review and meta-analysis	17
The influence of dental bleaching on patient's quality of life: A multistudy analysis of aesthetic and psychosocial outcomes	17
Bioactivity and antibacterial effects of zinc-containing bioactive glass on the surface of zirconia abutments	17
The use of antibiotics in the management of odontogenic facial swellings in children and adolescents: A scoping review	17
Can dental fillings affect the performance of an AI-driven innovative tool for automatic tooth segmentation in cone-beam computed tomography: A validation study?	17
Positional accuracy of a single implant analog in additively manufactured casts in biobased model resin	17
Prevalence of dentine hypersensitivity, erosive tooth wear, gingival recession and periodontal health in seven European countries	17
Sugar substitutes on caries prevention in permanent teeth among children and adolescents: a systematic review and meta-analysis	17
New Digital Environment Supports Endodontic Complications Reduction: Clinically Driven Ergo-Digital Study	17
Effect of silver diamine fluoride upon the microbial community of carious lesions: A scoping review	17
Accuracy of an artificial intelligence-driven tool for the detection of small edentulous regions on cone-beam computed tomography	17
Layered deep learning for automatic mandibular segmentation in cone-beam computed tomography	17
Comparison of different artificial landmarks and scanning patterns on the complete-arch implant intraoral digital scans	17
Influence of periodic milk or cream treatment on the anti-erosive potential of the acquired enamel pellicle	16
The effect of single-implant overdentures on cognitive function in older adults: A 3-year follow-up report	16
Accuracy of the maxillomandibular relationship at centric relation position recorded by using 3 different intraoral scanners with or without an optical jaw tracking system: An in vivo pilot study	16
Additive or subtractive manufacturing of crown patterns used for pressing or casting: A trueness analysis	16
The impact of oral diseases on respiratory health and the influence of respiratory infections on the oral microbiome	16
Role of occlusal factors on probable bruxism and orofacial pain: Data from the 1982 Pelotas birth cohort study	16
Periodontal breakdown inter-tooth relationships in estimating periodontitis-related tooth loss	16
Unveiling the correlation between in vivo endodontic reciprocate instrumentation and crack formation	16
Utilisation of a think-aloud protocol to validate a self-reported periodontitis questionnaire	16
Influence of crown shade, translucency, and scan powder application on the trueness of intraoral scanners	16
Accuracy of a novel semi-autonomous robotic-assisted surgery system for single implant placement: A case series	16
Basic behavioral management techniques in pediatric dentistry: A systematic review and meta-analysis.	16
Longitudinal evaluation of clinical, spectral and tissue degradation biomarkers in progression of periodontitis among cigarette and electronic cigarette smokers	16
Cost-effectiveness of school-based caries screening using transillumination	16
White diet is not necessary during dental bleaching treatment: A systematic review and network meta-analysis of clinical studies	16
Effect of layer thickness, build angle, and viscosity on the mechanical properties and manufacturing trueness of denture base resin for digital light processing	16
Influence of the dental arch and number of cutting-off and rescanning mesh holes on the accuracy of implant scans in partially edentulous situations	16
AI-based open-source software for cephalometric analysis from limited FOV radiographs	16
Deep learning for age estimation from panoramic radiographs: A systematic review and meta-analysis	16
Pilot clinical study to evaluate the efficacy of a professionally delivered high fluoride varnish on erosive tooth wear in an in-situ model	15
Editorial Board	15
Development and validation of a robotic system for milling individualized jawbone cavities in oral and maxillofacial surgery	15
Influence of mucosal tissue height on implant crestal bone: A 10-year follow-up of a controlled clinical trial	15
Accuracy assessment of dynamic navigation during implant placement: A systematic review and meta-analysis of clinical studies in the last 10 years	15
Accuracy of a 3D printed sleeveless guide system used for fiber post removal: An in vitro study	15
Qualitative and quantitative assessment of tooth wear in young individuals	15
Proteomic analysis of stimulated saliva in gastroesophageal reflux disease patients with and without erosive tooth wear: Observational study	15
Influence of alveolar ridge morphology and guide-hole design on the accuracy of static Computer-Assisted Implant Surgery with two implant macro-designs: An in vitro study	15
The potential ‘blue light hazard’ from LED headlamps	15
Automated detection and labelling of teeth and small edentulous regions on cone-beam computed tomography using convolutional neural networks	15
Artificial intelligence for caries and periapical periodontitis detection	15
Associations of general health conditions with masticatory performance and maximum bite force in older adults: A systematic review of cross-sectional studies	15
Challenges and opportunities in preparing dentists for primary care	15
Reflected near-infrared light versus bite-wing radiography for the detection of proximal caries: A multicenter prospective clinical study conducted in private practices	15
The effect of ferrule and core material on fracture resistance of endodontically treated anterior teeth restored with ceramic crowns after artificial aging	15
In vitro comparison of five desktop scanners and an industrial scanner in the evaluation of an intraoral scanner accuracy	15
Three-unit CAD/CAM-manufactured lithium disilicate FDPs after an average observation period of 120 months	15
Burden of nasopharyngeal carcinoma in Asia from 1990 to 2021	15
Hygienic maintenance of soft tissues in the treatment of minor recessions: a prospective study and three-dimensional analysis.	14
Trueness and precision of combined healing abutment-scan body system depending on the scan pattern and implant location: An in-vitro study	14
Artificial intelligence-aided detection of ectopic eruption of maxillary first molars based on panoramic radiographs	14
3D printed dental implants with a porous structure: The in vitro response of osteoblasts, fibroblasts, mesenchymal stem cells, and monocytes	14
A dentin hypersensitivity treatment using photothermal mineralizing nanoparticles	14
Accuracy of detection methods for secondary caries around direct restorations: A systematic review and meta-analysis	14
The in-vitro development of novel enzyme-based chemo-mechanical caries removal agents	14
Analysis of the accuracy of a dynamic navigation system in endodontic microsurgery: A prospective case series study	14
Design and evaluation of an MMP-9-responsive hydrogel for vital pulp therapy	14
Undergraduate teaching and assessment methods in prosthodontics curriculum: An international Delphi survey	14
Biocompatibility and periodontal regenerative potential of hydroxyapatite nanoparticles from Portunus Sanguinolentus Shells: A crystallographic, morphological, and molecular gene expression analysis	14
Relationship among different levels of individual and community social capital with oral health related-quality of life among adolescents	14
Direct restorations versus full crowns in endodontically treated molar teeth: A three-year randomized clinical trial	14
The effect of high-speed dental handpiece coolant delivery and design on aerosol and droplet production	14
Perception of oral health related quality of life and orofacial aesthetics following restorative treatment of tooth wear: A five-year follow-up	14
A narrative review of cracks in teeth: Aetiology, microstructure and diagnostic challenges	14
Artificial intelligence models for periodontitis classification: A systematic review	14