Colloid and Polymer Science

Article	Citations
Facile preparation of stretchable and multifunctional ionic gels via frontal polymerization of polymerizable ternary deep eutectic monomers with a long pot life	93
Synthesis of poly(lactic acid)-based macro-porous foams with thermo-active shape memory property via W/O high internal phase emulsion polymerization	39
Multiple fullerences induce polythiophene to self-curl	32
Diffusion of colloids at liquid-liquid interfaces	31
Self-healing poly(siloxane-urethane) carbon nanotube composites with multi-band repairing capability and efficient recovery have significant photothermal response	27
A non-spherical nanoparticles system for the delivery of peptides using polymer grafted nanocellulose	26
Research on the properties of in situ emulsified active associative polymer with low molecular weight based on low permeability oil reservoirs	24
Molecularly imprinted polymers based on attapulgite and sustained-release properties for 5-FU	23
Green synthesis of silver nanoparticles using Acacia leucophloea in the presence of cetyltrimethylammonium bromide and their antibacterial activity	23
Gold nanorods coated by molecularly imprinted polymer for sensitive and specific SERS detection of dyes	22
Optimization of nanoemulsion preparation process using response surface methodology and its application in the synthesis of nano polypyrrole electrode materials	22
Biomass-derived porous carbon based molecularly imprinted polymers with multi-boronic acid sites for capture of ribavirin from water samples	21
Effect of surfactant concentration and monomer polarity on particle nucleation in emulsion step polymerization of dithiol with diene	21
Effect of low-cost mussel-inspired poly(catechol/polyamine) modification of waste brick powder followed by grafting of epoxy elastomers on natural rubber composites	19
Ionically cross-linked pH-responsive hydrogel beads loaded with nickel cobaltite nanoparticles for controlled release of doxorubicin	19
Fluorocarbon vapors slow down coalescence in foams: influence of surfactant concentration	19
Comparative study on hybrid-based MoS2-GO hybrid nanofluid flow over a three-dimensional extending surface: A numerical investigation	18
Dispersion states of lecithin–soybean oil mixtures in water	18
Comparison of different approaches to describe the thermotropic volume phase transition of smart microgels	17
Diffusiophoretic velocity of a spherical soft particle	17
Synthesis and characterization of novel magnetic heat-resistant poly(amide-ether) nanocomposites based on dibenzo xanthene	17
Entropy generation for stagnation point dissipative hybrid nanofluid flow on a Riga plate with the influence of nonlinear convection using neural network approach	17
A photosensitive hydrogel based on a combination of iron tetraoxide and polydopamine	17
Formation of cinnamon essential oil/xanthan gum/chitosan composite microcapsules basing on Pickering emulsions	17
The use of an all-cationic coating formulation to reduce the amount of latex in paper coatings	17

Counterion-release versus dielectric entropy: insights from the Gouy-Chapman model for a uniformly charged plate	17
Retraction Note to: Synthesis and characterization of a novel sulfonated poly (aryl ether ketone sulfone) containing rigid fluorene group for DMFCs applications	16
Tribological and mechanical characteristics of glass/flax fiber-ZnO reinforced epoxy hybrid composite	16
A surfactant-polymer and macromolecular surfactant compound system for enhancing heavy oil recovery: Synthesis, characterization and mechanism	16
Novel nanocomposites based on poly(4,4′-diaminodiphenyl sulfone) and carbon black-ZnO (CB@ZnO) binary composites: synthesis, characterization, and mechanical, optical and electrochemical properties	16
Study on rheological model and characteristics of wet shotcrete	16
Fabrication of liner low-density polyvinyl-based carbon fibers via ultraviolet irradiation-vulcanization crosslinking	15
Demixing behavior of Pickering emulsions stabilized by Janus particles and uniform Pickering particles at different pH values	14
Colloid Science—as modern as ever	14
Enhanced solubilization of reactive dyes using mixed micellar media: insights from spectral and conductometric measurements	14
Comparison of nano-zinc oxide or calcium chloride incorporated polyvinyl alcohol/chitosan/anthocyanin films for active and intelligent packaging	14
Blends of linear poly(ethylene oxide) with poly(ethylene oxide) and poly(styrene oxide) brushes. Synthesis, characterization, and study of their thermal properties	13
Effect of pH and electrolyte concentration on sol–gel state of semi-dilute aqueous cellulose nanofiber suspension: an interpretation based on angle-dependent DLVO theory	13
Rheological, thermal, and mechanical properties of poly(butylene succinate) (PBS)/poly(L-lactide) (PLA) fiber biodegradable green composites	13
Double network hydrogel based on PVA and CMC: synthesis and its potential application in local drug delivery	13
Impact of surface conductivity on the zeta potential determination of concentrated aqueous polymer dispersions using electroacoustics and electrokinetic standard models	13
In situ investigation of the effect of functional groups in polymeric flocculants on the adsorption of kaolin and Pb2+	13
Structure/property relationship of semicrystalline polymers during tensile deformation: a molecular dynamics approach	13
Thermoresponsive phase behavior and nanoscale self-assembly generation in normal and reverse Pluronics®	12
A hyper-visco-pseudo-elastic model to characterize the temperature-dependent behavior of ethylene propylene diene monomer rubber	12
Facile method to improve toughness and biodegradability of polylactide by modified CaCO3	12
Molecular dynamics study of the anti-permeability performance of PDMS under tensile stress	12
Reduction and temperature responsive ion pair self-assembled nanoparticles composed of poly(allylamine) and α-lipoic acid	12
Experimental and theoretical studies on foam features of dodecyl benzene sulfonate-based ionic liquid surfactants: alkyl chain length of ester group of imidazolium cations	12
Physicochemical properties of piroxicam in ionic-mixed micellar medium: effect of charge on the micellization behaviour	12
A facile preparation of biochar-anchored magnetic photocatalytic PVDF composite for water remediation	12
Fabrication of green polymeric hybrid materials for batch and column adsorption study of Blue-XGRRL dye	12
Amphiphilic modified PES membrane for promising hemodialysis: anti-fouling performances and clearance	11
Rapid degradation of thermosetting ester epoxies and monomer recovery methods	11
Catalyst-free design of high-performance polyimine vitrimers: symmetrical monomer architecture enabling balanced rigidity, recyclability and shape-memory properties	11
Preparation of zinc oxide nanofibers and their photocatalytic degradation and antibacterial properties	11
Surface enrichment structures in a binary polymer system with different stiffnesses confined in slits	11
Crown ether functionalization of cellulose matrix for targeted removal of toxic metal ions from aqueous solution	11
Synergistic interaction of biomass-derived surfactant and nano-composite and its impact on thermal energy storage potential of conventional PCM	11
Investigation of performance and emission values of biodiesel fuels produced by adding ZnO nanoparticles as additives to waste sunflower and Köhnü grape seed oil	11
Analysis of cellulose extracted from waste products	11
Development and evaluation of folate-gelatin-poloxamer P407 copolymer nanogels for enhanced co-delivery of paclitaxel and curcumin in breast cancer therapy	11
Study of poly (butylene adipate-co-terephthalate)/beta-cyclodextrin/polyvinyl alcohol, doped Mg2+, coated recycled Fe3O4 particle carriers for enhancing immobilization penicillin G acylase performance	10
Synthesis of Ag nanoparticles by cathode glow discharge electrolysis using sacrificial Ag foil of anode	10
Synthesis, characterization, and cytotoxicity assay of γ-Fe2O3 nanoparticles coated with quercetin-loaded polyelectrolyte multilayers	10
Composition effects on the self-aggregation of phenylalanine-rich oligopeptides revealed by atomic force microscopy	10
Efficient removal anionic dyes in water using cationic crosslinked poly (N-vinyl imidazole) nanocomposite hydrogel	10
A green and sustainable approach to the fabrication of ZnO nanoparticles via Jatropha podagrica leaf extract for effective dye degradation and antibacterial applications	10
Highly adsorptive removal of Congo red from aqueous solution using TiO2 doped with Fe3+ nanoparticles	10
pH-responsive phenol–formaldehyde resin: aggregation mechanism and plugging science	10
Physicochemical and DFT insights into streptomycin sulfate and cetrimonium bromide interactions	10
Fabrication and analysis of copper oxide–based hydrogel nanocomposite for the extraction of MB dye from wastewater	10
Preparation and properties of one-component self-cross-linking stabilized epoxy-acrylate composite emulsion	10
Preparation and characterization of PLA/PBAT blends toughened by poly(lactic acid-r-malic acid) copolymer	10
Breakthrough analysis on selective adsorption of CO2 from biogas by polyethylenimine-impregnated resins	10

Particle velocity of submicron polystyrene latex and bubble formation in aqueous system under continuous and pulsed direct current	10
Preparation of polyelectrolyte complex nanoparticles with tunable and narrow size distributions by template polymerization	10
Development, characterization, and in vitro cytotoxicity of resveratrol-loaded lipid polymer hybrid nanocarriers (LPHN) in glioblastoma multiforme cells	10
Spectroscopic studies of 6-acetylaminobutyl-9-chloroquino[3,2-b]benzo[1,4]thiazine and evaluation of its encapsulation efficiency in human albumin nanoparticles	9
Rheological properties of nanocomposite hydrogels containing aluminum and zinc oxides with potential application for conformance control	9
Preparation and evaluation of w/o/w-type emulsions for encapsulation of citronella essential oil by inverse ionic gelation	9
Dispersion behavior and mechanism of action of Lithol Rubin BCA in aqueous media	9
Synthesis, characterization, and adsorption study of Congo Red on melamine-formaldehyde nanocomposite microspheres	9
Photoactive metal chalcogenides towards CO2 reduction–a review	9
Influence of liquid properties of colloidal crystals to thermal stability of colloidal crystals on different substrate surfaces through heterogeneous nucleation	9
Convective heat transfer of tri-hybrid nanofluid through a curved expanding surface with the impact of velocity slip and exponential heat source	9
Enhanced adsorption of amido black (AB) dye using PAN/EPI-DMA-bentonite composite fibers as a novel electrospun solution for wastewater treatment	9
Fabrication of a sugar-immobilized fluorescent PMMA shell on a Ni core particle via soap-free emulsion polymerization	9
Ion partitioning and ion size effects on streaming field and energy conversion efficiency in a soft nanochannel	9
Temperature- and oxidation-dependent doxorubicin release from poly(hydroxyethyl acrylate-co-phenyl vinyl sulfide) cryogel	9
Performance and mechanism of Cr(VI) adsorption in an aqueous solution by laponite modified with N-containing porous polymers	8
Facile construction of transparent and heat-insulating coatings with ATO nanoparticles and silane-modified polyacrylate latex by redox initiation	8
A patterned functional substrate for enhancing the wettability of oil droplets	8
Supramolecular gels from phosphonic acid-containing two-component gelators: efficient phase-selective gelation of aromatic and aliphatic hydrocarbons	8
Toughening of poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT): a morphological, thermal, mechanical, and degradation evaluation in a simulated marine environment	8
Emerging fabrication of ceramic nanofiber aerogel with the application in high-temperature thermal insulation, environment, and electromagnetic wave absorption	8
Switchable biomolecule adsorption on 2D thermoresponsive poly(N-isopropylacrylamide)–coated gold nanowire array	8
Rod-shaped microparticles — an overview of synthesis and properties	8
Correction to: Investigation of a hydrophobically associating polymer’s temperature and salt resistance for fracturing fluid thickener	8
Sodium alginate/sodium lignosulfonate composite gel beads for controlled release of (+)-pinoresinol: synthesis, characterization, and applications	8
Entropy generation in Casson-Williamson-Powell-Eyring hybrid ferrofluid flow in a microchannel: Adomian decomposition and deep neural networks approaches	8
Preparation, characterization, and adsorption kinetics of methylene blue dye in sodium alginate hydrogel with improved stability	8
Development and characterization of palmitoyl-modified arginine containing curcumin-loaded niosomal vesicles for improved antioxidant and anticancer activities	8
A greener approach for controlled release of Fenvalerate insecticide from renewable polymer thymol-formaldehyde-based encapsulated formulation	8
Analysis of particle size distribution and electro-kinetics of submicron particles in shear-thinning liquids	8
Crystallization kinetics of poly(ε-caprolactone) and chlorinated polyethylene binary blends	8
Stephan Förster: on the occasion of his 60th birthday	7
Relaxation effect on the diffusiophoretic mobility of a mercury drop	7
Preparation and properties of marine-derived sphingan WL gum-metal ion composite hydrogels	7
Miscibility, crystallization, mechanical, and rheological properties of poly (L-lactic acid)/poly(vinyl acetate) blends	7
Preparation of micron-sized alginate-based particles for rare earth adsorption	7
Effects of nano-fumed silica and carbonyl iron powder of different particle sizes on the rheological properties of shear thickening fluids	7
Thermostability of native DNA bound to TiO2 nanoparticles under physiological-like conditions	7
Preparation and performance evaluation of a water-in-water drag reducer	7
Surface modification of sodium hyaluronate with dopamine to enhance emulsifying capacity and application performance	7
Effect of eggshell fillers on the thermal and mechanical properties of regenerated cellulose film	7
Combining targeted chemotherapy of hydroxyethyl starch prodrug and photothermal therapy of MoS2 for treatment of bladder cancer	7
Fabrication and assessment of carboxymethyl guar gum-based sustainable films for packaging application	7
Electrophoresis of a weakly charged oil drop in an electrolyte solution: ion adsorption and Marangoni effects	7
Preparation of para-aramid aerogel fiber structurally colored by light scattering through wet spinning and supercritical drying	7
Interaction between silica particles with poly(ethylene oxide) studied using an optical tweezer: insignificant effect of poly(ethylene oxide) on long-range double layer interaction	7
Chain dimensions of poly(ethylene carbonate/ethylene oxide) copolymer with salt addition studied by SANS	7
Nano-structural modification of mass transfer channels in alginate membrane by dispersed oligoethylene glycol for nanofiltration applications	7
Competitive sorption of two anionic drugs on chitosan	7
Volume phase transition of NIPAM based copolymer microgels with non-thermoresponsive comonomers	7
Effect of ion species and ionic strength on the properties of underwater oleophobic (PDDA/PSS)4 polyelectrolyte multilayer film	7
Role of fluorocarbons in PUR foams: a cryo-SEM study	6
Polymer nanoarchitectonics for synthetic vesicles with human erythrocyte-like morphology transformation	6
Solar-driven seawater desalination and electricity generation based on anisotropic graphene aerogel via unidirectional microfluidic transportation	6
Fabrication of methacrylated casein/alginate microspheres crosslinked by UV light coupled with Ca2+ chelation for pH-sensitive drug delivery	6
Role of organogel chemistry on rheology and microstructure of molecular gels rationalized by Hansen solubility parameters	6
Optimization of Zn-Cu sulfide nanocomposites: a systematic study for smaller size, enhanced stability, and Reactive Black 5 adsorption efficiency	6
Research on the regulation of hydrophobic chain length on the swelling properties of hydrogels	6
Edible functionalized γ-cyclodextrin-MOFs for enhanced sustained drug release, antibacterial activity, and biocompatibility	6
Study on sedimentation stability control method for high-density oil-based drilling fluids	6
N-dodecyl β-D-glucopyranoside micelles catalyzed reaction of ascorbic acid with azure A chloride salt dye in acidic aqueous solution: A kinetic, thermodynamic, and mechanism study	6
Improved photovoltaic performance of PTB7:PC71BM blend by thermal annealing and solvent vapor annealing	6
Development of eco-friendly sodium alginate-based hydrogel for the effective removal of copper(II) and cobalt(II) from contaminated water	6
Hollow electrospun mats from biobased-polybutylene succinate and thermoplastic polyurethane blends for dermal wound dressing	6
Effective improvement of hydrophilicity and anti-fouling of PDA-modified PVDF membrane by MoS2	6
Selective colorimetric and fluorometric organogel sensors for the detection of F− and ClO− based on chiral glutamic and phenothiazine derivatives	6
Sulfonated lignin-based phenol–formaldehyde resin: stability and structure changes during aggregation	6
Synthesis and characterization of polyHIPEs using a polymerizable polyurethane macromolecular surfactant	6
Experimental study on the preparation and characterization of CMC-GG-XG high-stability gel foam	6
Using a solvent-induced self-assembly approach to fabricate and tune the organogels and hydrogels	6
Multifunctional hydrogel based on Hippophae rhamnoides peptides and cellulose nanocrystals	6
Preparation of nanoemulsions for oil-based drilling fluid removal and action mechanism	6
Thermoresponsive and co-nonsolvency behavior of poly(N-vinyl isobutyramide) and poly(N-isopropyl methacrylamide) as poly(N-isopropyl acrylamide) analogs in aqueous media	6
Effect of anions, urea and aggregation state on the thermal behavior of PDMAEMA-based polymers	6
Modifications of simple models of polymer blend compatibilization using block copolymer	6
Covalent triazine polymer/melamine–formaldehyde microsphere composites as efficient adsorbents for cationic and anionic dyes in water	6
A temperature-sensitive DNA-PNIPAAm hydrogel prepared by base pairing	6
Development of a microemulsion-based lyotropic liquid crystal system for enhanced topical delivery of apremilast in psoriasis	6
Nano micelle mediated In-Vitro release kinetics of two Biopharmaceutical Classification System (BCS) class II drugs with varying hydrophobicity	6
Research on the fabrication and properties of injectable antimicrobial hydrogels composed of mesoporous polydopamine	6

Biodegradable CPPC/PBS/PLA blends with enhanced adhesive properties by in situ compatibilization	6
Synthesis of the solar heat reflecting membrane by duplicating the Saharan silver ant micro-hair structure	6
Low-speed impact characteristics of shear thickening fluids: theoretical prediction model and experimental verification	6
Preparation and study of modified phytic acid/epoxy resin anti-corrosion coating	6
Surface-active ionic liquids with morpholinium cations and aromatic counterions: experimental and DFT approach to study their profound effect on micelle formation	5
An overview on electrospinning and its advancement toward hard and soft tissue engineering applications	5
Preparation and evaluation of antioxidant activity of citric acid-polyethylene glycol-tannin elastomers	5
Engineering tetraphenylethylene-based amphiphilic copolymers by dynamic covalent approach: Molecular origin from simple to complex aggregates	5
Thermal conductivity and electromagnetic shielding performance of three-dimensional anisotropic BN/MWCNT epoxy composites under low filling capacity	5
Cytotoxic activity of guanidinium copolymers loaded with silver nanoparticles and their interaction with model membranes	5
Construct perfect carbon nanotube/graphene nanoplate synergistic conductive network in poly(L-lactic acid) porous materials by nonsolvent-induced rapid phase separation	5
Mussel-inspired polydopamine and Al2O3 nanoparticles co-modified MoS2 for reinforcing anticorrosion of epoxy coatings	5
Electrospun PVA/PMMA nanofibrous mats incorporating bacitracin: Process optimization, drug release kinetics, and wound closure performance	5
Entropy generation analysis of MHD nanofluid in a corrugated vertical walls enclosure with a rectangular baffle using the Brinkmann-Forchheimer model	5
Cononsolvency of the responsive polymer poly(N-isopropylacrylamide) in water/methanol mixtures: a dynamic light scattering study of the effect of pressure on the collective dynamics	5
Phase separation, binding nature, and physico-chemical variables of TX-100 + crystal violet mixture: effects of the electrolytes and hydrotropes	5
Highly sensitive gellan gum/sodium lignosulfonate-modified hydrogel with temperature-adaptive properties for wearable sensor applications	5
Electrospun poly(octamethylene citrate) thermoset fibrous mat from chitin nanocrystal constructed Pickering emulsion	5
Cation release from different carboxymethyl cellulose hydrogels	5
Study on the formation mechanism of hydrothermal prefabricated activated carbon and its adsorption capacity for malachite green	5
CO2-switchable PMMA latexes with controllable particle size prepared by surfactant-free emulsion polymerization	5
Thermo-physical characterization and colloidal stability assessment of bio-enhanced coconut oil-based green cutting fluids	5
Selection of dispersant and dispersion mechanism of PVP on copper powders	5
Study on epoxy repair agents under the influence of bisphenol A diglycidyl ether (DGEBA): from macro to nano scale	5
Effect of epoxy resin modifications with industrial fillers on wetting and water absorption	5
The characterization of hexagonal lyotropic liquid crystal nanostructure: effects of polymer tail length	5
Effect of SEBS-g-MA on recycled PS/HDPE blend miscibility	5
One-dimensional array of nanoparticles using segmented polyurethane nanofibers as a template for enhanced catalytic efficiency	5
Study of the influence of the composition and pH of the solution on the structure and morphology of particle dispersions of a (bio)polyelectrolyte complex between chitosan and gelatin	5
Synthesis and characterization of cellulose nanocrystals derived from ginger stick for berberine delivery: exploring interactions with human holo-transferrin	5
Strong conductive hybrid hydrogel electrode based on inorganic hybrid crosslinking	5
High-performance triboelectric nanogenerator based on biocompatible electrospun polycaprolactone nanofiber and counter convex PDMS for low-frequency mechanical energy harvesting	5
Aggregation kinetics and morphological changes of PFR and establishment of triple-layer surface complexation model to explain ion difference	5
Mechanism and adsorptive performance of PANI/PTh copolymer as a novel and highly efficient adsorbent for the elimination of textile pollutants from aqueous solutions	5
Control of the rheological properties of concentrated aqueous MXene sediment suspensions using polymeric additives	5
Comparison of various plastic wastes in catalytic pyrolysis process: pyrolysis behavior and product formation over HZSM-5	5
Adsorption characteristics of anionic azo dye Ponceau 4 R in water environment using SiO2-CeO2 nanocomposites: experimental consideration and modeling	5
A low-cost carbonized Enteromorpha–coated wood for highly efficient solar-driven interfacial water evaporation	5
Diffusiophoresis of a mercury drop	5
Correction to: Sulfonate-functionalized polyacrylonitrile-based nanoparticles; synthesis, and conversion to pH-sensitive nanogels	5
Preparation and properties of silicone hydrogel contact lens based on PDMS-PU macromer	5
Enhancing the temperature resistance, salt resistance, and viscoelasticity of polyacrylamide via hydrophobic association: a rheological perspective	5
Anti-freezing, highly stretchable, and recyclable composite organohydrogels from bio-macromolecules crosslinked by multi-strength H bonds and chain entanglements	5
The relationship between chemical microstructure, crystallinity, mechanical properties, and CO2/N2 gases permselectivity of thermoplastic polyurethane membranes	4
Folic acid-conjugated magnetic-luminescent nanocomposites from Mn0.8Fe2.2O4 and GdVO4:Dy3+ with efficient heat generation and cytocompatibility in MDA-231 cell lines	4
PEGylated chitosan decorated UiO-66 nanoscale metal–organic frameworks as promising carriers for drug delivery	4
Design and characterization of pH-Receptive Chitosan nanocarriers for regulated doxorubicin release in cancer therapy: synthesis engineering and functional assessment	4
Study on the DC breakdown performance and dielectric characteristics of epoxy resin/SrTiO3 nanocomposites by varying temperature	4
Glycidyl methacrylate-based polyHIPEs: a facile redox-initiated polymerization of the oil phase in a water-in-oil emulsions and amine functionalization	4
Microemulsions constructed by a biosurfactant	4
Strategies to incorporate a fluorinated acrylate monomer into polymer particles: from particle morphology to film morphology and anticorrosion properties	4
Preparation and characterization of biodegradable polylactic acid/poly (butylene adipate-co-terephthalate) melt-blown nonwovens for oil-water separation	4
Modification on crystallization behavior and mechanical properties of polylactide by the addition of polyamide elastomer	4
Study on direct current electrical breakdown properties of polyimide films with different thickness	4
Enhancement in structural and mechanical properties of epoxy reinforced with silane-treated titanium dioxide	4
Modelling and prediction of mechanical properties of FFF-printed polycarbonate parts using ML and DA hybrid approach	4
Advancing sustainable materials: characterization of pistachio shell and talc filled polyester composites	4
Supercritical carbon dioxide foamed thermoplastic polyester elastomer with poly(lactic acid) blending: shrinkage reduction and expansion ratio improvement	4
Evaluation of conditions favorable for the enhanced stability of magnetite suspensions using visible spectroscopy	4
Investigation of temperature measurements of silicon-containing nonlinear composite varistors	4
First-principles study of the photoelectric properties of alkaline earth metal (Be/Mg/Ca/Sr/Ba)-doped monolayers of WSe2	4
Tripodal Melphalan-PEG AIE polymer prodrug for imaging diagnostic and therapeutic cancer	4
Transient electrophoresis of a spherical soft particle	4
Enhanced energy storage property of all-organic dielectrics by gradient layered design of sea-island structures	4
Study on the relationship between structure and performance of HPAM-based high viscosity friction reducer	4
A room-temperature ionic liquid-based superionic conductive polymer electrolyte with high thermal stability for long-cycle-life lithium batteries	4
Polyelectrolyte complexes hydrogels based on chitosan/pectin/NaCl for potentially wound dressing: development, characterization, and evaluation	4
Computational study of magnetite-ethylene glycol–water-based hybrid nanofluid dynamics on an exponential shrinking/stretching Riga surface under radiative heat flux	4
Adsorption and dilational rheology of polyacrylamide at interfaces: Implication on the stability of polymer-containing foamulsions	4
Colloid Society: a historical perspective — all set for the next 100 years?	4
A versatile method for facile and reliable synthesis of colloidal particles with a size and composition gradient	4
Self-aggregation of cationic gemini surfactants with amide groups in the spacer and variable alkyl chain length	4
Preparation and temperature resistance mechanism of nanoparticle-enhanced polymer gel	4
Impact of liquid properties on imbibition behavior of porous PDMS materials with varying compositions	4
Controlling the shell structure of hard core/hydrogel shell microspheres	4
Sustainable silver nanoparticle-decorated reduced graphene oxide with enhanced aqueous dispersibility for PVA nanocomposite films with multifunctional performance	4
Facile synthesis of sodium alginate-based/nano-montmorillonite composite core-shell hydrogels for effective removal of methylene blue	4
Oral linalool-based nanoemulsion of acalabrutinib for ameliorating its oral bioavailability and in vitro anticancer potential in T lymphoblast cell lines	4
Fabrication of pH-responsive hydrogel beads based on coumaric acid–grafted aminated gellan gum and alginate for colon-targeted delivery of resveratrol	4
Biomimetic approach to poly(ethyl methacrylate) solubilization, deposition, and coating loading with functional biomaterials	4
Adsorption behaviors of dyes on a biodegradable gelatin/chitosan/β-cyclodextrin hydrogel from an aqueous solution	4
Effect of monohydroxy alcohol and urea on phase separation and thermodynamics of triton X-100 in the presence of crystal Violet dye	4
Box-Behnken design based optimization of polyvinylpyrrolidone stabilized valproic acid nanoemulsion and evaluation of its anticancer potential	4
Physicochemical investigations of clouding development and physicochemical properties of Triton X-100 and levofloxacin hemihydrate mixture: influence of sodium salts composition	4
Adsorption characteristics of Cu2+ on CeO2/SiO2 nanomaterials based on rice husk and its application to pre-concentration and determination in food samples	4
Rapid and sensitive detection of paracetamol in environmental aqueous samples using MnO2 nanosheet-based colorimetric sensing platform	4
Enhancing the fire safety and mechanical performance of EVA/IFR cable materials via MXene by nano-synergistic strategy	3
Modeling and experimental design optimization of toxic brilliant green dye removal using schiff’s base benzaldehyde grafted- modified chitosan: desirability function, reusability, and adsorption mecha	3
Enhancing the properties of PLA/TPS blends using PLA-g-MA as a compatibilizer: a study on thermal, morphological, mechanical, chemical, and biodegradation characteristics	3
Phase behavior and structure of a biocompatible microemulsion based on Tween 20, 2-ethylhexylglycerine and isopropyl palmitate in water	3
Study on the efficient precipitation of germanium by Fe(OH)3 colloid generated by neutralization precipitation method	3
Study on synthesis of cross-linked poly(cyclotriphosphazene-co-luteolin) nanospheres and their properties for controlled drug delivery	3
Liquid crystalline structuring in dilute suspensions of high aspect ratio clay nanosheets	3
What is the origin of conductivity in water-poor reverse micelles?	3
UV-activated coating polymer particle containing quaternary ammonium for antimicrobial fabrics	3