Colloid and Polymer Science

Article	Citations
Facile preparation of stretchable and multifunctional ionic gels via frontal polymerization of polymerizable ternary deep eutectic monomers with a long pot life	93
Synthesis of poly(lactic acid)-based macro-porous foams with thermo-active shape memory property via W/O high internal phase emulsion polymerization	39
Multiple fullerences induce polythiophene to self-curl	32
Diffusion of colloids at liquid-liquid interfaces	31
Self-healing poly(siloxane-urethane) carbon nanotube composites with multi-band repairing capability and efficient recovery have significant photothermal response	27
A non-spherical nanoparticles system for the delivery of peptides using polymer grafted nanocellulose	26
Research on the properties of in situ emulsified active associative polymer with low molecular weight based on low permeability oil reservoirs	24
Molecularly imprinted polymers based on attapulgite and sustained-release properties for 5-FU	23
Green synthesis of silver nanoparticles using Acacia leucophloea in the presence of cetyltrimethylammonium bromide and their antibacterial activity	23
Optimization of nanoemulsion preparation process using response surface methodology and its application in the synthesis of nano polypyrrole electrode materials	22
Gold nanorods coated by molecularly imprinted polymer for sensitive and specific SERS detection of dyes	22
Effect of surfactant concentration and monomer polarity on particle nucleation in emulsion step polymerization of dithiol with diene	21
Biomass-derived porous carbon based molecularly imprinted polymers with multi-boronic acid sites for capture of ribavirin from water samples	21
Ionically cross-linked pH-responsive hydrogel beads loaded with nickel cobaltite nanoparticles for controlled release of doxorubicin	19
Fluorocarbon vapors slow down coalescence in foams: influence of surfactant concentration	19
Effect of low-cost mussel-inspired poly(catechol/polyamine) modification of waste brick powder followed by grafting of epoxy elastomers on natural rubber composites	19
Comparative study on hybrid-based MoS2-GO hybrid nanofluid flow over a three-dimensional extending surface: A numerical investigation	18
Dispersion states of lecithin–soybean oil mixtures in water	18
A photosensitive hydrogel based on a combination of iron tetraoxide and polydopamine	17
Formation of cinnamon essential oil/xanthan gum/chitosan composite microcapsules basing on Pickering emulsions	17
The use of an all-cationic coating formulation to reduce the amount of latex in paper coatings	17
Counterion-release versus dielectric entropy: insights from the Gouy-Chapman model for a uniformly charged plate	17
Comparison of different approaches to describe the thermotropic volume phase transition of smart microgels	17
Diffusiophoretic velocity of a spherical soft particle	17
Synthesis and characterization of novel magnetic heat-resistant poly(amide-ether) nanocomposites based on dibenzo xanthene	17

Entropy generation for stagnation point dissipative hybrid nanofluid flow on a Riga plate with the influence of nonlinear convection using neural network approach	17
Study on rheological model and characteristics of wet shotcrete	16
Retraction Note to: Synthesis and characterization of a novel sulfonated poly (aryl ether ketone sulfone) containing rigid fluorene group for DMFCs applications	16
Tribological and mechanical characteristics of glass/flax fiber-ZnO reinforced epoxy hybrid composite	16
A surfactant-polymer and macromolecular surfactant compound system for enhancing heavy oil recovery: Synthesis, characterization and mechanism	16
Novel nanocomposites based on poly(4,4′-diaminodiphenyl sulfone) and carbon black-ZnO (CB@ZnO) binary composites: synthesis, characterization, and mechanical, optical and electrochemical properties	16
Fabrication of liner low-density polyvinyl-based carbon fibers via ultraviolet irradiation-vulcanization crosslinking	15
Enhanced solubilization of reactive dyes using mixed micellar media: insights from spectral and conductometric measurements	14
Comparison of nano-zinc oxide or calcium chloride incorporated polyvinyl alcohol/chitosan/anthocyanin films for active and intelligent packaging	14
Demixing behavior of Pickering emulsions stabilized by Janus particles and uniform Pickering particles at different pH values	14
Colloid Science—as modern as ever	14
Rheological, thermal, and mechanical properties of poly(butylene succinate) (PBS)/poly(L-lactide) (PLA) fiber biodegradable green composites	13
Double network hydrogel based on PVA and CMC: synthesis and its potential application in local drug delivery	13
Impact of surface conductivity on the zeta potential determination of concentrated aqueous polymer dispersions using electroacoustics and electrokinetic standard models	13
In situ investigation of the effect of functional groups in polymeric flocculants on the adsorption of kaolin and Pb2+	13
Structure/property relationship of semicrystalline polymers during tensile deformation: a molecular dynamics approach	13
Blends of linear poly(ethylene oxide) with poly(ethylene oxide) and poly(styrene oxide) brushes. Synthesis, characterization, and study of their thermal properties	13
Effect of pH and electrolyte concentration on sol–gel state of semi-dilute aqueous cellulose nanofiber suspension: an interpretation based on angle-dependent DLVO theory	13
Molecular dynamics study of the anti-permeability performance of PDMS under tensile stress	12
Reduction and temperature responsive ion pair self-assembled nanoparticles composed of poly(allylamine) and α-lipoic acid	12
Experimental and theoretical studies on foam features of dodecyl benzene sulfonate-based ionic liquid surfactants: alkyl chain length of ester group of imidazolium cations	12
Physicochemical properties of piroxicam in ionic-mixed micellar medium: effect of charge on the micellization behaviour	12
A facile preparation of biochar-anchored magnetic photocatalytic PVDF composite for water remediation	12
Fabrication of green polymeric hybrid materials for batch and column adsorption study of Blue-XGRRL dye	12
Thermoresponsive phase behavior and nanoscale self-assembly generation in normal and reverse Pluronics®	12
A hyper-visco-pseudo-elastic model to characterize the temperature-dependent behavior of ethylene propylene diene monomer rubber	12
Facile method to improve toughness and biodegradability of polylactide by modified CaCO3	12
Synergistic interaction of biomass-derived surfactant and nano-composite and its impact on thermal energy storage potential of conventional PCM	11
Investigation of performance and emission values of biodiesel fuels produced by adding ZnO nanoparticles as additives to waste sunflower and Köhnü grape seed oil	11
Analysis of cellulose extracted from waste products	11
Development and evaluation of folate-gelatin-poloxamer P407 copolymer nanogels for enhanced co-delivery of paclitaxel and curcumin in breast cancer therapy	11
Amphiphilic modified PES membrane for promising hemodialysis: anti-fouling performances and clearance	11
Rapid degradation of thermosetting ester epoxies and monomer recovery methods	11
Catalyst-free design of high-performance polyimine vitrimers: symmetrical monomer architecture enabling balanced rigidity, recyclability and shape-memory properties	11
Preparation of zinc oxide nanofibers and their photocatalytic degradation and antibacterial properties	11
Surface enrichment structures in a binary polymer system with different stiffnesses confined in slits	11
Crown ether functionalization of cellulose matrix for targeted removal of toxic metal ions from aqueous solution	11
Highly adsorptive removal of Congo red from aqueous solution using TiO2 doped with Fe3+ nanoparticles	10
pH-responsive phenol–formaldehyde resin: aggregation mechanism and plugging science	10
Physicochemical and DFT insights into streptomycin sulfate and cetrimonium bromide interactions	10
Fabrication and analysis of copper oxide–based hydrogel nanocomposite for the extraction of MB dye from wastewater	10
Preparation and properties of one-component self-cross-linking stabilized epoxy-acrylate composite emulsion	10
Preparation and characterization of PLA/PBAT blends toughened by poly(lactic acid-r-malic acid) copolymer	10
Breakthrough analysis on selective adsorption of CO2 from biogas by polyethylenimine-impregnated resins	10
Particle velocity of submicron polystyrene latex and bubble formation in aqueous system under continuous and pulsed direct current	10
Preparation of polyelectrolyte complex nanoparticles with tunable and narrow size distributions by template polymerization	10
Development, characterization, and in vitro cytotoxicity of resveratrol-loaded lipid polymer hybrid nanocarriers (LPHN) in glioblastoma multiforme cells	10
Study of poly (butylene adipate-co-terephthalate)/beta-cyclodextrin/polyvinyl alcohol, doped Mg2+, coated recycled Fe3O4 particle carriers for enhancing immobilization penicillin G acylase performance	10
Synthesis of Ag nanoparticles by cathode glow discharge electrolysis using sacrificial Ag foil of anode	10
Synthesis, characterization, and cytotoxicity assay of γ-Fe2O3 nanoparticles coated with quercetin-loaded polyelectrolyte multilayers	10

Composition effects on the self-aggregation of phenylalanine-rich oligopeptides revealed by atomic force microscopy	10
Efficient removal anionic dyes in water using cationic crosslinked poly (N-vinyl imidazole) nanocomposite hydrogel	10
A green and sustainable approach to the fabrication of ZnO nanoparticles via Jatropha podagrica leaf extract for effective dye degradation and antibacterial applications	10
Photoactive metal chalcogenides towards CO2 reduction–a review	9
Influence of liquid properties of colloidal crystals to thermal stability of colloidal crystals on different substrate surfaces through heterogeneous nucleation	9
Convective heat transfer of tri-hybrid nanofluid through a curved expanding surface with the impact of velocity slip and exponential heat source	9
Enhanced adsorption of amido black (AB) dye using PAN/EPI-DMA-bentonite composite fibers as a novel electrospun solution for wastewater treatment	9
Fabrication of a sugar-immobilized fluorescent PMMA shell on a Ni core particle via soap-free emulsion polymerization	9
Temperature- and oxidation-dependent doxorubicin release from poly(hydroxyethyl acrylate-co-phenyl vinyl sulfide) cryogel	9
Ion partitioning and ion size effects on streaming field and energy conversion efficiency in a soft nanochannel	9
Spectroscopic studies of 6-acetylaminobutyl-9-chloroquino[3,2-b]benzo[1,4]thiazine and evaluation of its encapsulation efficiency in human albumin nanoparticles	9
Rheological properties of nanocomposite hydrogels containing aluminum and zinc oxides with potential application for conformance control	9
Dispersion behavior and mechanism of action of Lithol Rubin BCA in aqueous media	9
Preparation and evaluation of w/o/w-type emulsions for encapsulation of citronella essential oil by inverse ionic gelation	9
Synthesis, characterization, and adsorption study of Congo Red on melamine-formaldehyde nanocomposite microspheres	9
Toughening of poly(lactic acid) (PLA) with poly(butylene adipate-co-terephthalate) (PBAT): a morphological, thermal, mechanical, and degradation evaluation in a simulated marine environment	8
Emerging fabrication of ceramic nanofiber aerogel with the application in high-temperature thermal insulation, environment, and electromagnetic wave absorption	8
Switchable biomolecule adsorption on 2D thermoresponsive poly(N-isopropylacrylamide)–coated gold nanowire array	8
Rod-shaped microparticles — an overview of synthesis and properties	8
Correction to: Investigation of a hydrophobically associating polymer’s temperature and salt resistance for fracturing fluid thickener	8
Sodium alginate/sodium lignosulfonate composite gel beads for controlled release of (+)-pinoresinol: synthesis, characterization, and applications	8
Entropy generation in Casson-Williamson-Powell-Eyring hybrid ferrofluid flow in a microchannel: Adomian decomposition and deep neural networks approaches	8
Preparation, characterization, and adsorption kinetics of methylene blue dye in sodium alginate hydrogel with improved stability	8
Development and characterization of palmitoyl-modified arginine containing curcumin-loaded niosomal vesicles for improved antioxidant and anticancer activities	8
A greener approach for controlled release of Fenvalerate insecticide from renewable polymer thymol-formaldehyde-based encapsulated formulation	8
Analysis of particle size distribution and electro-kinetics of submicron particles in shear-thinning liquids	8
Crystallization kinetics of poly(ε-caprolactone) and chlorinated polyethylene binary blends	8
Performance and mechanism of Cr(VI) adsorption in an aqueous solution by laponite modified with N-containing porous polymers	8
Facile construction of transparent and heat-insulating coatings with ATO nanoparticles and silane-modified polyacrylate latex by redox initiation	8
A patterned functional substrate for enhancing the wettability of oil droplets	8
Supramolecular gels from phosphonic acid-containing two-component gelators: efficient phase-selective gelation of aromatic and aliphatic hydrocarbons	8
Effects of nano-fumed silica and carbonyl iron powder of different particle sizes on the rheological properties of shear thickening fluids	7
Thermostability of native DNA bound to TiO2 nanoparticles under physiological-like conditions	7
Preparation and performance evaluation of a water-in-water drag reducer	7
Surface modification of sodium hyaluronate with dopamine to enhance emulsifying capacity and application performance	7
Effect of eggshell fillers on the thermal and mechanical properties of regenerated cellulose film	7
Combining targeted chemotherapy of hydroxyethyl starch prodrug and photothermal therapy of MoS2 for treatment of bladder cancer	7
Fabrication and assessment of carboxymethyl guar gum-based sustainable films for packaging application	7
Electrophoresis of a weakly charged oil drop in an electrolyte solution: ion adsorption and Marangoni effects	7
Preparation of para-aramid aerogel fiber structurally colored by light scattering through wet spinning and supercritical drying	7
Interaction between silica particles with poly(ethylene oxide) studied using an optical tweezer: insignificant effect of poly(ethylene oxide) on long-range double layer interaction	7
Chain dimensions of poly(ethylene carbonate/ethylene oxide) copolymer with salt addition studied by SANS	7
Nano-structural modification of mass transfer channels in alginate membrane by dispersed oligoethylene glycol for nanofiltration applications	7
Competitive sorption of two anionic drugs on chitosan	7
Volume phase transition of NIPAM based copolymer microgels with non-thermoresponsive comonomers	7
Effect of ion species and ionic strength on the properties of underwater oleophobic (PDDA/PSS)4 polyelectrolyte multilayer film	7
Stephan Förster: on the occasion of his 60th birthday	7
Relaxation effect on the diffusiophoretic mobility of a mercury drop	7
Preparation and properties of marine-derived sphingan WL gum-metal ion composite hydrogels	7
Miscibility, crystallization, mechanical, and rheological properties of poly (L-lactic acid)/poly(vinyl acetate) blends	7
Preparation of micron-sized alginate-based particles for rare earth adsorption	7
N-dodecyl β-D-glucopyranoside micelles catalyzed reaction of ascorbic acid with azure A chloride salt dye in acidic aqueous solution: A kinetic, thermodynamic, and mechanism study	6
Improved photovoltaic performance of PTB7:PC71BM blend by thermal annealing and solvent vapor annealing	6
Development of eco-friendly sodium alginate-based hydrogel for the effective removal of copper(II) and cobalt(II) from contaminated water	6
Hollow electrospun mats from biobased-polybutylene succinate and thermoplastic polyurethane blends for dermal wound dressing	6
Effective improvement of hydrophilicity and anti-fouling of PDA-modified PVDF membrane by MoS2	6
Selective colorimetric and fluorometric organogel sensors for the detection of F− and ClO− based on chiral glutamic and phenothiazine derivatives	6
Sulfonated lignin-based phenol–formaldehyde resin: stability and structure changes during aggregation	6
Synthesis and characterization of polyHIPEs using a polymerizable polyurethane macromolecular surfactant	6
Experimental study on the preparation and characterization of CMC-GG-XG high-stability gel foam	6
Using a solvent-induced self-assembly approach to fabricate and tune the organogels and hydrogels	6
Multifunctional hydrogel based on Hippophae rhamnoides peptides and cellulose nanocrystals	6
Preparation of nanoemulsions for oil-based drilling fluid removal and action mechanism	6
Thermoresponsive and co-nonsolvency behavior of poly(N-vinyl isobutyramide) and poly(N-isopropyl methacrylamide) as poly(N-isopropyl acrylamide) analogs in aqueous media	6
Effect of anions, urea and aggregation state on the thermal behavior of PDMAEMA-based polymers	6
Modifications of simple models of polymer blend compatibilization using block copolymer	6
Covalent triazine polymer/melamine–formaldehyde microsphere composites as efficient adsorbents for cationic and anionic dyes in water	6
A temperature-sensitive DNA-PNIPAAm hydrogel prepared by base pairing	6
Development of a microemulsion-based lyotropic liquid crystal system for enhanced topical delivery of apremilast in psoriasis	6
Nano micelle mediated In-Vitro release kinetics of two Biopharmaceutical Classification System (BCS) class II drugs with varying hydrophobicity	6
Research on the fabrication and properties of injectable antimicrobial hydrogels composed of mesoporous polydopamine	6
Biodegradable CPPC/PBS/PLA blends with enhanced adhesive properties by in situ compatibilization	6
Synthesis of the solar heat reflecting membrane by duplicating the Saharan silver ant micro-hair structure	6
Low-speed impact characteristics of shear thickening fluids: theoretical prediction model and experimental verification	6
Preparation and study of modified phytic acid/epoxy resin anti-corrosion coating	6
Role of fluorocarbons in PUR foams: a cryo-SEM study	6
Polymer nanoarchitectonics for synthetic vesicles with human erythrocyte-like morphology transformation	6
Fabrication of methacrylated casein/alginate microspheres crosslinked by UV light coupled with Ca2+ chelation for pH-sensitive drug delivery	6
Solar-driven seawater desalination and electricity generation based on anisotropic graphene aerogel via unidirectional microfluidic transportation	6
Role of organogel chemistry on rheology and microstructure of molecular gels rationalized by Hansen solubility parameters	6

Optimization of Zn-Cu sulfide nanocomposites: a systematic study for smaller size, enhanced stability, and Reactive Black 5 adsorption efficiency	6
Research on the regulation of hydrophobic chain length on the swelling properties of hydrogels	6
Edible functionalized γ-cyclodextrin-MOFs for enhanced sustained drug release, antibacterial activity, and biocompatibility	6
Study on sedimentation stability control method for high-density oil-based drilling fluids	6