International Journal of Pressure Vessels and Piping

Article	Citations
Estimation of UTS from small punch test using an improved method	127
Resilience analysis of stress corrosion cracking in AISI 4340 steel under varying industrial electrochemical conditions	91
Creep analyses for pipe bends under combined internal pressure and bending loads	91
An extension approach to estimate soil corrosivity for buried pipelines	77
Nonuniform straddling fatigue crack propagation on the interface between dissimilar materials	68
Research on fusion regulation mechanism of dissimilar steel welds based on compound magnetic field	64
Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel	57
Determination of creep behavior of vessel steel Q345R at elevated temperatures	53
Corrigendum to ‘Theoretical and experimental research on the critical buckling pressure of the thin-walled metal liner installed in the composite overwrapped pressure vessel’ [Int. J. Press. Vessels P	45
Investigations of hydrogen diffusion and embrittlement behavior in tempered high-strength carbon steel AISI 4130	42
The whole-life ratcheting behavior of internal pressurized elbow subjected to force and displacement cycling with a damage-coupled kinematic hardening model	42
Welding distortion investigation of rotary drill rig pipe with radial loading transition bars	41
The stability of anchored cylindrical steel tanks with a secondary stiffening ring	40
Corrosion susceptibility behavior in 12Cr–1Mo martensitic stainless steel welded by SAW process and the effect of δ-ferrite in the HAZ	39
Forecasting pipeline safety and remaining life with machine learning methods and SHAP interaction values	38
Vibration test and fatigue test for failure probability evaluation method with integrated energy	37
Microstructural and mechanical analysis of double pass dissimilar welds of twinning induced plasticity steel to austenitic/duplex stainless steels	36
Mechanical stress analysis of various GPHE corrugated plates during the assembly and in working conditions	35
Influence of precipitate evolution on the impact fracture behavior in Nb-containing 16Cr–25Ni superaustenitic stainless steel weld metal	33
Study on microstructure and mechanical behavior relationship for laser-welded dissimilar joint of P92 martensitic and 304L austenitic steel	31
Experimental and numerical analysis of transient thermal stresses on thick-walled cylinder	31
Digital twin based predictive diagnosis approach for submarine suspended pipelines	30
Development of an experimental-analytical method for obtaining optimal two-layer welding window of a Ni–Cr–Mo–V alloy steel	30
Earthquake damage mitigation methods for buried pipelines under compressive loads: A case study of the Thames water pipeline	29
Stresses in pipes subject to thermal fluctuations and linear temperature ramps	29

Mechanical responses of L450 steel under biaxial loading in the presence of the stress discontinuity	27
Computational elastodynamics of functionally graded thick-walled cylinders and annular coatings subjected to pressure shocks	27
A novel refined Caputo kernel and constitutive concepts for semi-exact nonlinear dynamic and creep analyses of suddenly pressurized hollow fractional-order visco-hyperelastic cylinders	26
Surrogate-based structural optimization design of large-scale rectangular pressure vessel using radial point interpolation method	26
Analysis of the influence of clamp installation position on vibration stress for spatial pipeline	25
Uncertain frequency response analysis of clamp-pipe systems via the coordinate transformed polynomial chaos expansion	25
A ratcheting assessment method based on cumulative damage	25
Numerical predictions of low cyclic fatigue and creep-fatigue behavior of P92 steel under non-isothermal-mechanical loading	25
Creep in welded AISI 310 steel – An experimental comparison between fracture and phase transformation	24
Fatigue crack growth and slow crack growth of HDPE pipes under internal pressure and flat plate compression	24
Generation and classification models of ultrasonic signals in aged cast austenitic stainless steel (CASS)	23
Machine learning-assisted probabilistic creep life assessment for high-temperature superheater outlet header considering material uncertainty	23
Optimizing the butt-weld process of pipes based on the inherent strain approach	23
Buckling behavior of sandwich pipe under external pressure and lateral load	23
Investigating the impact of roller position on pressure tube-end fitting rolled joint performance using 3D explicit finite element analysis	23
Structural integrity assessment of plates containing embedded cracks-part I: Finite element fracture analyses	23
Surrogate model development using simulation data to predict weld residual stress: A case study based on the NeT-TG1 benchmark	23
Effect of Nb on microstructure and corrosion resistance of X80 pipeline steel	23
Reduction of flexural vibration of a fluid-filled pipe with attached vibration absorbers	22
Thermomechanical stress analysis and fatigue lifetime evaluation of coal-fired boiler components during peak shaving transient processes: Effects of load cycling rate	22
Applications of machine learning in pipeline integrity management: A state-of-the-art review	22
Numerical simulation of residual stress in post internal-welding process of bimetal composite pipe and optimization of welding sequence	22
Microstructure and mechanical properties of TIG and TIG+ FCAW automatic welded joints of X70 pipeline steel at 45° slope	21
High-temperature bulging technique for manufacturing titanium alloy spherical pressure vessels using single-curvature polyhedron	21
Effect of residual stress on the axial buckling behaviour of the hydraulic-formed bellows	21
Evaluating critical SZW and its variation using curved CT specimens used in pressure tubes material testing of nuclear reactor	21
Experimental study on the mechanical behavior of buried steel pipeline subjected to the local subsidence	20
An experimentally-based procedure for residual life assessment of steel radiant tubes	20
Likelihood-free Hamiltonian Monte Carlo for modeling piping degradation and remaining useful life prediction using the mixed gamma process	19
Interaction between surface breaking and embedded circumferential flaws in tension loaded (pressurized) steel pipes	19
High sensitivity ultrasonic NDT technique for detecting creep damage at the early stage in power plant steels	19
Degradation of microstructure and strength properties of heat-resistant steels operating under variable loads	19
Experimental study on slow tensile, fatigue, and impact on X42 steel and #20 carburizing steel	19
Study on fracture assessment by GTN model for BWR reactor internals based on material properties of simulated irradiated stainless steels	19
Experimental study on the bond-slip behavior of steel tube-coal gangue concrete	18
An experimental investigation on the multi-objective optimization of laser cladding repairing process parameters for hydrogenation reactors	18
Leakage localization in an underground pressurized pipeline in steady-state	18
Mode-I stress intensity factors for cracked R-fluted shells under complex loads	18
Probabilistic fatigue life prediction of notched specimens based on modified stress field intensity method under multiaxial loading	18
Questions relating to the reliable extrapolation of creep rupture data	18
Development of an empirical model to predict the burst pressure of corroded elbows of pipelines by finite element modelling	18
Ultimate strength of externally pressurised steel spheres containing through-thickness defects	18
Retraction notice to “Analytical and CFD analysis investigation of fluid-structure interaction during water hammer for straight pipe line” [Int. J. Pres. Ves. Pip. 194 Part A (2021) 104528]	18
Probabilistic treatment of pipe girth weld residual stress in fracture assessment	17
Numerical assessment of bolt-tightening procedures in HDPE-steel flange assemblies	17
Effect of service on microstructure and mechanical properties of Nb-stabilised austenitic stainless steel	17
Status diagnosis and feature tracing of the natural gas pipeline weld based on improved random forest model	17
Effects of the geometrical shapes on buckling of conical shells under external pressure	17
Optimization design on resonance avoidance for 3D piping systems based on wave approach	17
Structural features ensuring the increase of service characteristics of high-nickel steels for pressure vessels of prospective energy-generation reactors	17

Study on stress concentration and fatigue life of tubing with slip indentation	17
Effects of groove configuration and buttering layer on the through-thickness residual stress distribution in dissimilar welds	17
Study on the stability of multi-span U-shaped pipe conveying fluid with complex constraints	17
Modeling and optimization of A-GTAW process using back propagation neural network and heuristic algorithms	17
Machine learning modeling and experimental study to forecast the pressure of Very High-Pressure (VHP) steam in an industrial steam cracking process	16
Development of stress intensity factor equations for rectangular shaped surface flaws in a plate	16
Improved SWT model for predicting multiaxial fatigue life of bellows under combined movement load	16
A novel model for prediction of burst capacity of corroded pipelines subjected to combined loads of bending moment and axial compression	16
Experimental investigation on creep behaviors and life prediction across phase-transformation of thermal aged 16MND5 steel	16
Impact of process parameters on temperature and residual stress distribution of X80 pipe girth welds	16
An improved creep damage mechanics model and its application to evaluate creep strain design codes for hot outlet manifold in steam reformer furnace	16
Creep-fatigue interactions in type 316H under typical high-temperature power plant operating conditions	16
Numerical analysis of burst pressure and maximum inflation height of aluminium made pillow plates	16
A primary plus secondary local PWHT method for mitigating weld residual stresses in pressure vessels	16
A simplified toughness estimation method based on standard tensile data	16
Structural assumption on design of rounded rectangular bellows under pressure	16
Modelling of a Grade 91 power plant pressurised header weldment under ultra super-critical creep conditions	15
Improvement of the return mapping algorithm based on the implicit function theorem with application to ductile fracture analysis using the GTN model	15
Evolution of phase ratio and its effect on residual stress for 2205 duplex stainless steel multipass welded joints by thermo-metallurgical-mechanical model	15
Stress relaxation cracking failure in a high pressure steam pipeline in an ammonia plant	15
Direct measurement of the resistance to ductile fracture propagation	15
Reassessment of Thor® 115 parent metal performance including consideration of notch behavior	15
Limit loads of dissimilar metal welded joints for joining safe end to pipe-nozzle of nuclear pressure vessel	15
Residual stresses in austenitic thin-walled pipe girth welds: Manufacture and measurements	15
Identification of coating layer pipeline defects based on the GA-SENet-ResNet18 model	15
Editorial Board	15
The structural strain method for fatigue evaluation of welded components: Analytical treatment of reversed plasticity	15
Experimental and numerical investigation of ratcheting behavior in seamless carbon steel 90° elbow pipe with small dimensions under constant internal pressure and in-plane cyclic bending	15
Numerical investigation of liquid-solid erosion in unbonded flexible pipes	15
Microstructure, mechanical properties, and corrosion behaviour of wire arc additive manufactured martensitic stainless steel 410 for pressure vessel applications	15
Experimental and numerical investigation of vertical shock tube performance for blast load testing of geological media	14
Probabilistic fracture mechanics analyses of a reactor pressure vessel using the irradiation embrittlement evaluation based on the Bayesian nonparametric method	14
Composite repair method for internally damaged cylinders subjected to external pressure	14
Failure analyses for plate monotonic/cyclic and elbow out-of-plane cyclic loading tests using the Gurson–Tvergaard–Needleman model	14
Regularities of the creep deformation and failure of 15Kh2NMFA-A steel within the temperature range of 900–1200 °C	14
Investigation into microstructures and properties of AISI 430 ferritic steel butt joints fabricated by GMAW	14
The performance enhancement of containment with fiber reinforcement following a LOCA considering different ambient conditions	14
Thermoelastic response and boundary effect of cross-ply laminated cylindrical shells based on a quasi-3D type higher-order shear deformation theory	14
Friction stir welding of industrial grade AISI 316L and P91 steel pipes: A comparative investigation based on mechanical and metallurgical properties	14
Research on magnetic flux leakage testing of pipelines by finite element simulation combined with artificial neural network	14
A shell equilibrium modeling for stress distribution of offshore tubular joints	13
Characterizing the cyclic behavior of piping T-joint connections	13
Development and experimental validation of a thermo-metallurgical-mechanical model of the laser metal deposition (LMD) process	13
Limit and shakedown analysis of double-layer tube considering different material properties	13
A new method for predicting reference temperature of ferritic steel using finite element analysis and master curve method	13
Degradation behavior of a 12 % Cr tempered martensite ferritic steel after 20 years of service	13
Effect of ion penetration on the aging of EPDM components used in caustic liquid transfer lines by microscopic analysis	13
Low hydrogen pressure effect over microhardness and impact toughness of an experimental X-120 microalloyed steel	13
Turbulence-induced vibration of tube bundles subjected to cross-flow and loose support	13
Experimental investigation for multi-defect detection of industrial pipeline based on passive infrared thermal imaging analysis: A case study	13
Controlling method of the welding residual stress in support platform of hydrogenation reactor	12
A probabilistic creep model incorporating test condition, initial damage, and material property uncertainty	12
Investigation on fatigue crack propagation law of the crack perpendicular to interface for Zr/Ti/steel composite plate	12
Three-dimensional thermal buckling analysis of functionally graded material structures using a modified FSDT-based solid-shell element	12
Leak-before-break and other concepts of break-exclusion	12
A simplified method for studying cyclic creep behaviors of deep-sea manned submersible viewport windows	12
A novel procedure to determine the hoop mechanical properties of pipe materials using ring elongation testing technique	12
Prediction of the internal corrosion rate for oil and gas pipelines and influence factor analysis with interpretable ensemble learning	12
Effect of heat-up and oxidation on the PHWR channel under severe accident scenario-an experimental study	12
Numerical and experimental study of anti-slosh performance of combined baffles in partially filled tank vehicles	12
Effect of confining pressure on the structural integrity of NEPE solid propellant grain	11
Effect of cobalt on Microstructure and toughness properties of 9Cr-1.8W-0.4Ni-xCo weld metal	11
Numerical sensitivity analysis of corroded pipes and burst pressure prediction using finite element modeling	11
Neutron diffraction, finite element and analytical investigation of residual strains of autofrettaged thick-walled pressure vessels	11
Saturation stress based models and their applicability to tensile flow behaviour of superalloy 617M	11
Seismic vulnerability assessment of spherical and horizontal-cylindrical storage tanks through finite element analyses and observational data	11
Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H	11
Evolution of welding residual stresses involving the cutting process and its effect on fatigue performance	11
Stress relaxation assessment of high-temperature bolts under combined biaxial loads: Theory and simulation	11
Study on the tensile properties of reinforced thermoplastic pipes under different internal pressures and temperatures	11
Innovative rotary friction welding of heat exchanger tube nozzles on high pressure headers	11
Effect of multi-element synergistic addition on the microstructure evolution and performance enhancement of laser hot-wire cladded Fe-based alloy	11
Double vibratory stress relief treatment of welded pipes as an alternative to heat stress relief treatment: Effects on hardness, Charpy impact energy and CTOD	11
Enhancing non-metallic gasket performance with shape memory fibers	11
Impact properties of modified 9Cr 1Mo steel welds: Comparison between cold wire and hot wire gas tungsten arc welding processes	11
Study of physicochemical properties of polyethylene gas pipelines material with a prolonged service life	11
Free and forced vibration of fluid-filled laminated cylindrical shell under hydrostatic pressure	11
Very high cycle fatigue of austenitic stainless steels and their welds for reactor internals at ambient temperature and 300 °C	11
Burst pressure of thin-walled pipes with arbitrarily orientated isolated surface corrosion defect	10
Review of limit load solutions of smooth pipe bends Part I: Defect-free bends	10

Constraint characterization and fracture initiation analysis for semi-elliptical surface cracks in reactor pressure vessel	10
Effects of peak temperatures and cooling rates on delta ferrite formation and mechanical properties for heat affected zones in 9Cr-RAFM steel	10
Strain fracture behaviors and crack equivalence of X80 welded joints with non-sharp notches at weld root	10
Microstructure and creep rupture strength of 2 kinds of P91 steels with abnormally low hardness	10
Experimental evaluation of multiple-component residual stress distribution in a dissimilar metal repair joint of ferritic/martensitic steel using the asymmetric-cut and the symmetric-cut contour metho	10
Stress concentrations in skew pressurized holes: A numerical analysis	10
Time-dependent reliability of corroded mild steel pipes by different failure modes	10
Influence of microstructure on the micro-region fracture toughness of the 30Cr2Ni4MoV turbine rotor welded joint	10
Fatigue life of elbow pipe for in-plane loading (Part I: Stainless steel)	10
Study on the effect of welding residual stress on creep-cyclic plasticity behaviour	10
Effects of pre-tempering on the microstructure, hardness and impact toughness of the 2.25Cr–1Mo-0.25V heat-resistant steel weld metal	10
Applicability investigation on failure assessment diagram of ASME code section XI - Appendix H for ferritic nuclear piping	10
Modified version of Monkman-Grant equation for Gr.91 by incorporating “strain to minimum creep rate” parameter	10
Collapse of cone-cylinder transitions having single load indentation imperfection subjected to axial compression	10
Multiaxial fatigue life prediction model based on an improved strain energy density criterion	10
Safety and stability analysis of variable cross-section disc-buckle type steel pipe high support system	10
Leakage diagnosis of natural gas pipeline based on multi-source heterogeneous information fusion	10
Numerical simulation of welding residual stress in Incoloy 825/L360QS bimetal clad tube	10
Strain response analysis of API 5L X80 pipelines with a constrained dent subjected to internal pressure	10
Small punch evaluation of mechanical properties for 310S stainless steel considering pre-strain effect	10
Investigation on microstructure evolution, mechanical properties and corrosion resistance of dual phase stainless steel joints welded by GTAW and SAW methods	10
Ultrasonic guided wave techniques and applications in pipeline defect detection: A review	10
Fracture mechanics analysis of a closure head of a PWR reactor pressure vessel LEFM-based SIF	10
Editorial Board	10
Investigating the effects of shroud and blade thickness profiles on aeromechanical behavior and fatigue-life of 17-4PH impellers	10
Microstructure and properties of laser cladding coating at the end of L415/316L bimetal composite pipe	9
Calibration, validation, and selection of hydrostatic testing-based remaining useful life prediction models for polyethylene pipes	9
Failure analysis of polytetrafluoroethylene lined pipe under thermal shock	9
A multi-method coupled approach to simulate crack growth path and stress-strain field at the tip of the growing crack in the dissimilar metal welded joint	9
Experimental and numerical study on the indentation response of mechanically lined pipe	9
Effect of gasket material on flange face corrosion	9
Geometry effects on the pressure-temperature limit curve of small modular reactor vessel	9
Effect of thermo-mechanical controlled process on microstructural texture and hydrogen embrittlement resistance of API 5L X70 pipeline steels in sour environments	9
Performance of buried pipeline under reverse fault in permafrost region	9
Multi-factor corrosion model of TP110TS steel in H2S/CO2 coexistence and life prediction of petroleum casings	9
A P–S–N curve fitting method based on mixed Weibull distribution and expectation-maximization algorithm	9
Failure assessment of corroded offshore pipelines using code-based approaches and a combination of numerical analysis and artificial neural network	9
Failure analysis of abnormal leakage in hydrogen cyanide reactor	9
BPNN-Assisted restoration of buckling resistance of dented torispherical heads using CFRP	9
Multiaxial ratcheting-fatigue evaluation of pressurized elbow pipe under strong cyclic loading using damage-coupled cyclic plasticity model	9
Investigation of buckling capacity behaviours of corroded tanks	9
Editorial Board	9
Knowledge gaps in fitness-for-service assessment procedures; summary of the 2nd ‘mind the gap’ workshop	9
A novel adaptive noise reduction method for field natural gas pipeline defect detection signals	9
Comparison between a predicted and an experimentally measured residual stress field generated by side-punching of API X65 steel	9
Analysis of remaining life assessment of three-phase gravity separator for oil rectification with the simultaneous usean RBI matrix	9
Gas Tungsten arc welding of Ti-6Al-4V sheet for pressure vessels used in aerospace application: A detailed characterization of weldment	9
Reliability analysis of subsea connectors based on the GM-K model using thermal-structural coupling	9
Investigation of corrosion behavior of 5Cr steel in CO₂-silty sand environment: Effects of hydrodynamic impact angles	9
Numerical and experimental investigation on distribution of residual stress and the influence of heat treatment in multi-pass dissimilar welded rotor joint of alloy 617/10Cr steel	9
A comprehensive finite element framework for modeling of PEX-Al-PEX composite pipes	9
Fatigue Performance of Corroded Concrete Pipes with Void Defects under Coupled Traffic-Groundwater Loading	8
Two-step feature extraction of acoustic emission signals for leakage detection of valves in gas pipelines	8
Effects of hydrostatic preload on strain hardening and strain aging of boiler tubes	8
Research on the residual stress of stainless steel pipe after overlay repair	8
Microstructures and properties of a novel 115 mm thick 08Cr9W3Co3VNbCuBN heat-resistant steel tube joints welded by shielded metal arc welding	8
Creep rupture assessment of cyclically heated 3D pressure pipelines with volumetric defects using a direct numerical approach	8
A damage-coupled viscoplastic constitutive model considering tension-compression asymmetry for modeling low cycle fatigue mechanical behaviors of Inconel 617 at elevated temperature	8
Analysis of the dynamic evolution behavior of radial deformation and cracks during in-service welding instability based on quasi-in-situ and in-situ experiments	8
Multi-conditional dynamic response of parallel multi-pipelines in the same tunnel based on leakage and explosion conditions - A case study of China-Myanmar tunnel pipelines	8
Limit state-based fitness-for-service assessments of steel pipelines containing dent-gouges	8
Effect of autofrettage on the ultimate behavior of thick cylindrical pressure vessels	8
Real scenario analysis of buried natural gas pipeline leakage based on soil-atmosphere coupling	8
Ratcheting-fatigue behavior and life prediction of Z2CN18.10 austenitic stainless steel elbow	8
Statistical inference and performance evaluation for failure assessment models of pipeline with external axial surface cracks	8
Analysis of steel tank shell deformation and its impact on further utilisation	8
Editorial Board	8
Synchronously improving strength and toughness for pipeline steel weld via cerium adding	8
A novel small specimen testing method based on a pneumatic bulging test: Measurement of tensile properties at high temperatures	8
Dissimilar welding of duplex stainless steel with Ni alloys: A review	8
Safety assessment of interaction behavior of high cycle and very high cycle fatigue with creep at high temperature	8
Residual stresses in autofrettaged functionally graded pressurized thick cylinders	8
Ratcheting behavior in SS316L concentric and eccentric reducers under cyclic axial load and constant internal pressure using DIC method	8
Risk assessment of the corrosion resistance performances for epoxy coatings under drilling environments using AHP method	8
Characterization of quasi-cleavage fracture of pre-strained X80 pipeline steel subjected to SSRT tests in gas hydrogen	8
Ultrasonic wave propagation analyses in centrifugally cast stainless steel using solidification grain structure models	8
Obtaining optimum creep lifetime of Al 7075-T6 rotating pressurized vessel based on the experimental data, using reference stress method (RSM)	8
Comprehensive assessment of deep-water vessel implosion mechanisms: OceanGate's Titan submersible failure sequence explained	8
Comparison of numerical modelling approaches for the residual burst pressure of thick type IV composite overwrapped pressure vessels related to low-velocity impact	8
Simulation and experimental study on liner collapse of lined composite pipe	8
Probabilistic finite element-based reliability of corroded pipelines with interacting corrosion cluster defects	8
Assessment by finite element modeling of corrosion in dent on X52 steel pipelines	8
Effect of strain aging on mechanical properties and engineering critical assessment of X80 girth weld metal	8
Towards understanding of corrosion behaviors of Q235A pipeline steel subjected to simulated direct stray current interference in different electrolytes	8
Structural integrity assessment of plates containing embedded cracks - Part II: Developing guidance on using the limit load solutions	7
Experimental and numerical assessment of fracture toughness variations in steam boiler components after a long period of operation	7
Reliability analysis of steel pipe with longitudinal corrosion damage considering elastoplastic fracture behaviour	7
A novel wire arc additive manufactured process for 316L stainless steel for pressure vessel applications: Microstructure, mechanical properties and corrosion behaviour	7
Tracking research on the performance changes of S31042 steel under long term service	7
Numerical study on thermal stress fluctuation caused by coaxial-jet flow in lower head of central measurement column	7
Structural integrity assessment of pipe elbows: Burst test and finite element analysis	7
Strain and stress responses of the springback and rerounding processes of dented pipelines	7
Monitoring of fatigue damage development in as-received and exploited 10CrMo9-10 power engineering steel supported by Digital Image Correlation	7
Damage accumulation in carbon steel under low-cycle loading at the crack initiation stage and strain ageing temperature	7
Editorial Board	7