Glass and Ceramics

Papers
(The TQCC of Glass and Ceramics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Analysis of the Causes of Brickwork Efflorescence in the Aral Sea Region24
Physicochemical Properties of Andesitic Basalt Mineral Fibers16
Peculiarities of Sol-Gel Synthesis of Aluminum-Magnesium Spinel12
Solid Fuel Combustion Wastes at CHPP in the Arctic Zone of the Russian Federation: Utility in Eco-Geopolymer Technology10
Effect of Sitallization Conditions on the Hardness of Transparent Sitalls in the System ZnO–MgO–Al2O3–SiO29
Ca2P2O7–Ca(PO3)2 Ceramic Obtained by Firing β-Tricalcium Phosphate and Monocalcium Phosphate Monohydrate Based Cement Stone9
Ceramic Composites of the Zirconium Dioxide and Aluminum Oxide System Including Strontium Hexaaluminate9
Pre-Ceramic Nanostructured Liznmn-Ferrite Powders: Synthesis, Structure, and Electromagnetic Properties8
Microstructure Features of Metal-Matrix Composites Based on Thermoelectric Bismuth Telluride Matrix and Ferromagnetic Filler8
Precision Laser Welding of Silica Glass with Iron-Nickel Alloy7
Effect of Fluxes on the Synthesis of Porous Materials Based on Native Silicate Raw Material7
Use of Alternative Energy Sources and Glass Household Waste in Glazing Technology for Ceramic Facing Tile6
Actual Role of the Magnetic Susceptibility of Particles in Magnetophoresis (Magnetic Separation)6
Multicomponent Optical Glasses with High Refractive Index6
Synthesis of Porous Ceramic Materials for Catalytically Active Membranes by Technological Combustion and Sintering6
Phase Composition and Physico-Mechanical Properties at Different Firing Temperatures of Ceramic Earthquake-Resistant Bricks with the Use of Ferro-Dust5
Prospects for Using Clayey Raw Materials of the Krupeiskii Sad Deposit for Producing Heat-Resistant Ceramic Products5
Use of Bulk Industrial Wastes in the Production of Glass Foam Materials5
Fly Ash as Technogenic Raw Material for Producing Refractory and Insulating Ceramic Materials (Review)5
Development of Nanofiltration Ceramic Membrane Production Technology5
Development of an Organic Binder for Ceramic Products Obtained by Additive Technology5
Synthesis of Bi2NiTa2O9 with Pyrochlore Structure5
Plasma-Sprayed Cermet Coatings Based on Fluoromagnesium Apatite: Deposition Technology and Properties4
Gas Processing Waste: Promising Raw Material for Designing the Composition of Ceramic Grinding Bodies4
Influence of Mineral Additives on the Structure and Properties of Heat-Insulating Materials Based on Silica-Containing Raw Material4
Effect of Heat Treatment Conditions on the Properties of Nanoporous Glasses Activated by Gold Nanoparticles4
Polarization-Dependent Birefringence in Lithium Aluminosilicate Glass4
Effect of the Modification of Polyurea by Glass-Microspheres on its Performance4
Effect of Mechanochemical Activation Conditions on the Physicochemical Properties of Zinc Oxide4
Glass Cutting Technology Combining Two Different Lasers4
Synthesis and Spectral Properties of Glasses in the System Bismuth Oxide – Germanium Oxide – Cerium Oxide3
Relationship of Properties, Phase Composition, and Microstructure of Clinker Brick3
Anorthite Ceramic Based on Loess Loam3
Eco-Geopolymers Based on CHP Plant Ash-Slag Waste: Promising Materials for Road Construction in the Arctic Zone3
Nucleation Process in Metasilicate Melts3
Scanning Electron Microscopy Study of the Microstructure of Ancient Issyk-Kul Ceramic3
Stress State of a Glass Coating In Pipes3
Calcium Phosphate Ceramic Foam Obtained by Firing a Hydroxyapatite – Monocalcium Phosphate Monohydrate Powder Mixture3
Optimization of the Formations Parameters of Hollow Channels in Glass by Direct Laser Writing and Selective Etching3
Synthesis and Properties of Silicon-Carbide-Modified Porous Glass Composite3
Energy- and Resource-Saving Technology for Obtaining Decorative Coatings on Sheet Glass3
Development of Compositions of Pigmented Colored Lead-Free Glazes for Improving Ceramic Product Design3
Effect of the Additives B2O3 and P2O5 on Silicate and Glass-Formation Processes in Making Strontium Aluminosilicate Glasses3
Heat-Resistance Enhancement of Fiberglass-Reinforced Plastics in Manufacturing Environments3
Study of the Influence of Nanotechnogenic Raw Materials and Pyrophyllite on the Orientation of Clay Particles and the Water Permeability of Acid-Resistant Materials3
Pulsed Laser Punching of Through Holes in Optically Thick Glass and Ceramic Plates3
Effect of Copper (II) Oxide on the Microstructure and Phase Transformations of Bismuth Orthoniobate3
Laser Drilling of Microholes in Glass3
Information Analysis of the Sheet-Glass Utilization Factor in Production3
Effect of Molarity and Temperature of Alkaline Activator Solution on the Rheological Properties and Structure Formation of Alkali-Activated Refractory Materials3
Control of Liquid Laser-Induced Etching of Quartz Glass3
High-Temperature Ceramic Composites (SiC/SiCw)3
Influence of the Anionic Composition of Initial Salts on Obtaining Zinc Orthostannate by the Sol-Gel Method3
Mineralogical Aspects of Expanded Vermiculite Ores3
Structure Formation in Cast Spinelide-Pyroxene Glass-Ceramic Materials Under Non-Equilibrium Crystallization3
Mechanochemical and Ceramic Synthesis of Cobalt Ferrite3
Synthesis and Properties of Nd-Doped Chlorofluorosilicate Lead Glasses3
Foam Glass Synthesis by the Hydrate Method Based on Different Natural Materials3
Carbon Footprint of the Life Cycle of Glass Containers2
Glass Formation and Crystallization in Strontium-Aluminum-Silicate Glass: Influence of Modifying Additives on Melting and Crystallization2
X-Ray Generation during Piezoelectric Lighter Operation in Vacuum2
Suspension Temperature as a Rheological Control Parameter in Magnetic Separation2
Use of Steel-Making Furnace Dust in Ceramic-Bodies2
Influence of Calcium Oxide Additive on the Properties and Structure of Building Geopolymers Based on Fly Ash from CHPP-222
Investigation of Mullitization in Fused Materials Based on Kaolinite Clay and Production Waste2
Fast Method of Determining the Properties of Perlite Rock2
Electrospinning of Zirconia Fibers2
Thermostable Transparent Lithium-Aluminosilicate Sitall Doped with Neodymium Oxide2
Influence of Carbon Nanostructures on the Physical and Operational Properties in Al2O3–ZrO2 Structural Ceramic2
Effect of Underglaze Paints as Cobalt and Nickel Salt Solutions on Porcelain Structure2
Technology for Producing Ceramic Materials for Hydrocyclone Linings2
Quartz Sands of the Tamdinskoe Deposit: Promising Raw Material for Glass Production2
Anorthite-Containing Building Ceramic Using Metallurgical Sludge Waste2
Porosity Structure and Technical Properties of Clinker Materials based on Non-Ferrous Metallurgy waste in Eastern Kazakhstan2
Metal-Ceramic Composite Bi2Te3–Gd: Thermoelectric Properties2
Influence of Liquid Porophore Distribution on the Formation of the Porous Structure of Foam Glass2
Physicomechanical Studies of Ancient Ceramics Discovered in Kyrgyzstan2
Diagnostics of the Working Zone of Gradient Stability in a Magnetometer with Particle Susceptibility Control (For Magnetic Separation Problems)2
Al2O3-Based Ceramic Materials for LTCC Technology: An Overview2
Production of Rock-Based Foam-Glass Materials (Review)2
Thermal Spalling Resistance of Glass Coatings on Pipes2
Wollastonite Ceramic from Chalk and Diatomite for Refractory Heat Insulation2
Na2O–CaO–SO3 Ceramics as Promising Inorganic Porogens2
Transparent Glass-Ceramic Materials Based on Lead Fluoroborate Glasses Co-Activated by Eu/Gd2
Thermal Transformations in Hardening Compositions Based on Hydroxyapatite, Monocalcium Phosphate Monohydrate, and Polymeric Binders2
Uralian Ultrapure Quartz: Raw Material Source for Making Transparent Quartz Glass2
Porophores for Cellular Glass Based on TPP Ash-Slag Materials2
Investigation of the Possibility of Using Light Aluminosilicate Components of Fly Ash for the Production of Refractory Heat-Insulating Materials2
Thermal Behavior of Mixtures Based on Metakaolin and Sodium Hydroxide2
Glass-Silica Based on Glass Household Waste and Waste from Enrichment of Ferruginous Quartzites of the Kursk Magnetic Anomaly2
Laser Writing of Crystalline Structures in Lithium-Niobium-Germanate Glasses2
Optical Glass with γ-Ga2O3 Nanocrystals for UV-C Radiation Visualization2
Quality Improvement of Casting Molds Via Wettability Improvement of Wax Models with a Water-Based Ceramic Suspension2
Investigation of the Porosity Structure in the Ceramic Wall Material of the Fortress in Girona (Spain)2
Laser Writing of Luminescent Microdomains with CdS Quantum Dots in Silicate Glass1
Influence of Grain Structure Features on the Thermoelectric Properties of Compounds Based on Bismuth Telluride1
Research on the Ceramic Properties of Orenburg Oblast Clay1
Interaction of Lead-Silicate Glasses with Dilute Hydrofluoric Acid Solutions1
Energy-Saving Technology of Assorted Glassware Decoration by Plasma Spraying1
Structuring of Methanol Synthesis Catalyst CuO/ZnO/γ-Al2O3 During Mechanochemical Synthesis1
Photoluminescence of Gallate Glass-Ceramics: Al2O3 Influence1
Resource- and Energy-Saving Technology for Using Foam Paints to Decorate Manufactured Glass Articles1
Femtosecond Laser Welding of Glass and Sitall with Substantially Different Values of the LTEC1
Chemical Transformations as a Tool for Controlling the Properties of Calcium Carbonate Powder1
Glauconite Sandstones of the Changi Deposit — Promising Raw Material for Obtaining Green and Brown Pigments1
Chemical Interaction Between Heat-Resistant Steel and S93-3M Mark Electrovacuum Glass: An Investigation1
Influence of High-Alumina Alkaline-Etching Sludge on the Technical Indicators and Phase Composition of Acid-Resistant Materials1
Piezo Ceramic Technology for Environmental Impact Mitigation1
Dielectric Properties of BN–ZrB2 and BN–ZrO2 Based Ceramics Produced by Self-Propagating High-Temperature Synthesis1
Effect of Acrylate Monomer on the Characteristics of Photopolymerizable Suspensions for Obtaining Ceramic from Stabilized ZrO21
Application of Qualitatively Improved Expanded Perlite (Review)1
Investigation of the Influence of the Energy of Thermal Plasma on the Morphology and Phase Composition of Aluminosilicate Microspheres1
Sol-Gel Synthesis of Lanthanum Cobaltite Powders with Added Strontium and Calcium1
Particularities of Glass Batch Preparation with Selenium1
Reduced-Density Sphero-Plastics Based on Hollow Ceramic Microspheres and Oligomethylsilsesquioxane1
Turning of Thermoplastics Using Ceramic Cutting Tools1
Dielectric Properties of Finely Disperse Kaolinite Masses with Different Humidification1
Gel Casting Method for Producing Ceramic Materials: A Review1
Silver-Activated Nanoporous Glass Substrates for Giant Raman Scattering Spectroscopy1
Crystalline Line Formation from Lithium Heptagermanate in Lithium Germanate Glass1
Pyroxenite-Based Ceramic Pigment1
Interrelation of the Phase and Chemical Compositions with the Longevity of the Ceramic Material of the > 600 yr Old Barcelona Catholic Cathedral1
Phase Transformations Under the Action of Femtosecond Pulses in ZnO–MgO–Al2O3–SiO2 Sitalls1
Brucite-Containing Waste from Refractory Materials Production in Wastewater Purification Processes1
Characteristics of Fired Clay Brick with Added Dolomite Powder1
Production and Properties of Ceramic Made From Nickel Oxide Nanopowder1
Optimization of Technological Regulation of Container Glass Production: Best Available Technologies, General Binding Rules, and Carbon Intensity of Products1
Crystallization and Luminescence of Ni2+-Doped Gallium-Germanium Silicate Glasses with Partial Al2O3 Substitution of Ga2O31
Comprehensive Analysis of the Physicochemical Properties of Metallurgical Dust for Determining the Main Directions of its Reprocessing1
Mechanism of Laser Immersion-Processing of Glass1
Effect of Co-Use of Mineral Wool Production Waste and Catalytic Cracking Catalyst Waste on Ceramic Structure and Properties1
Thermodynamic Analysis of Chemical Reactions of Oxides with Carbon and Carbon (II) Monoxide for Selecting Additives for Corundum Ceramic Reinforced with Carbon Nanotubes1
Formation of a Glass Layer in Ceramic Composite Materials as a Result of Exposure to High-Enthalpy Flow1
Influence of Nepheline-Syenite and Mineral Wool Production Waste on Operational Properties of Ceramics1
Polarization-Dependent Birefringence in Sodium Aluminoborate Glasses1
Effect of Thermo-Hydrogen Reduction of Lead-Silicate Glasses on their Wetting by Weak Acidic Solutions1
On the Possibility of Enriching Quartz Raw Materials of Uzbekistan for the Glass Industry1
Ceramic Tile Based on Local Hydromica Clay and Pegmatite Tailings1
Synthesis of Multicomponent Compounds with Pyrochloric Structure1
Investigation of the Influence of the Crystallization of Quartz-Glass Pipe Material on the Quality of Quartz Ceramic Workpieces1
Phase Composition of Ceramic-Granite Based on Russian Raw Materials1
Water-Soluble Urea-Formaldehyde Oligomers in Paint for Single-Firing Decoration of Ceramic1
Laser Writing of Polarization-Dependent Birefringence in Sodium-Borate Glasses1
Interaction of Lead-Silicate Glasses with Caustic Soda Solutions1
Technogenic Metallurgical Raw Materials for Producing Ceramic Materials with Anorthite1
Physicochemical Processes in Alkaline Glass with Anodic Bonding of Glass and Silicon1
Investigation of Laser Technology for Cutting Mica1
Control of Nickel Layer on Metallized Ceramics1
Changes in the Properties of Basalt Fiber Reinforced Polymer (BFRP) on Moisture Diffusion at Room Temperature1
Insulating Enamel Based on Lead-Borate Glass1
Energetics Metrics for Foam-Glass Concrete Building Products1
Dense and Porous Ceramic Materials Made from the Slack Coal of the Inta Deposit1
Application of Secondary Carbon Fiber for Reinforcing Composite Material Based on Alkali-Activated Blast-Furnace Slag1
Sintering of Periclase with Brucite-Aluminum Phosphate Binder1
Characteristics of Kaolin Clay from the Deposit in the Svetlinskii Area of Orenburg Oblast1
Preparation of Alumina-Magnesia Spinel Based High-Porosity Ceramic Materials1
0.046133041381836