Chemical Papers

Papers
(The TQCC of Chemical Papers is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-05-01 to 2024-05-01.)
ArticleCitations
The photocatalytic process in the treatment of polluted water85
Investigations of conducting polymers, carbon materials, oxide and sulfide materials for supercapacitor applications: a review36
Coordination behavior, structural, statistical and theoretical investigation of biologically active metal-based isatin compounds32
Treatment of whitewater from pulp and paper industry using membrane filtrations30
Green synthesis of silver nanoparticles using Eupatorium adenophorum leaf extract: characterizations, antioxidant, antibacterial and photocatalytic activities29
Modelling the DFT structural and reactivity study of feverfew and evaluation of its potential antiviral activity against COVID-19 using molecular docking and MD simulations28
Use of a Schiff base-modified conducting polymer electrode for electrochemical assay of Cd(II) and Pb(II) ions by square wave voltammetry28
Overview on green synthesis of metallic nanoparticles25
Synthesis and supercapacitor performance of polyaniline-titanium dioxide-samarium oxide (PANI/TiO2-Sm2O3) nanocomposite24
Low-waste fermentation-derived organic acid production by bipolar membrane electrodialysis—an overview23
Structurally novel bi-nuclear cobalt(III) complex self-assembled by a single-armed salamo-like ligand23
Iron oxide clusters on g-C3N4 promote the electron–hole separation in photo-Fenton reaction for efficient degradation of wastewater23
On the topological descriptors and structural analysis of cerium oxide nanostructures22
Intrinsically conducting polymers and their combinations with redox-active molecules for rechargeable battery electrodes: an update22
New analytical models for precise calculation of crystallite size: application to synthetic hydroxyapatite and natural eggshell crystalline materials21
Green synthesis and characterization of silver nanoparticles using Morinda lucida leaf extract and evaluation of its antioxidant and antimicrobial activity21
Metal doped fullerene complexes as promising drug delivery materials against COVID-1921
Carbon dots from eco-friendly precursors for optical sensing application: an up-to-date review20
Impact of cone wall roughness on turbulence swirling flow in a cyclone separator19
Implementation of mature tea leaves extract in bioinspired synthesis of iron oxide nanoparticles: preparation, process optimization, characterization, and assessment of therapeutic potential19
Caffeic acid, a dietary polyphenol, as a promising candidate for combination therapy19
Polypyrrole/functionalized multi-walled carbon nanotube composite for optoelectronic device application18
Investigation of the effect of temperature and electrolytes on the physicochemical parameters for the self-assembly of dodecyltrimethylammonium bromide18
How to express the antioxidant properties of substances properly?18
Thiosemicarbazones-based Co(II), Ni(II), Cu(II) and Zn(II) complexes: synthesis, structural elucidation, biological activities and molecular docking17
Effect of pH fluctuations on the biodegradability of nanocomposite Mg-alloy in simulated bodily fluids17
Investigation of the impacts of simple electrolytes and hydrotrope on the interaction of ceftriaxone sodium with cetylpyridinium chloride at numerous study temperatures17
Poly(vinyl alcohol)/(hyaluronic acid-g-kappa-carrageenan) hydrogel as antibiotic-releasing wound dressing17
Antioxidative, anticancer, and antibacterial activities of a nanoemulsion-based gel containing Myrtus communis L. essential oil17
Optical and magnetic properties of YFeO3 nanoparticles synthesized by a co-precipitation method at high temperature16
A short overview on the synthesis, properties and major applications of poly(p-phenylene vinylene)16
Chitosan nanoparticles containing Elettaria cardamomum and Cinnamomum zeylanicum essential oils; repellent and larvicidal effects against a malaria mosquito vector, and cytotoxic effects on a human sk16
Concentration-dependent SERS profile of olanzapine on silver and silver-gold metallic substrates15
Environmental microplastics and their additives—a critical review on advanced oxidative techniques for their removal15
Synthesis, antimicrobial and α-glucosidase inhibition of new benzimidazole-1,2,3-triazole-indoline derivatives: a combined experimental and computational venture15
Acoustic sharp-edge-based micromixer: a numerical study15
Simulation for the behavior of new Fe(III) and Cr(III)-thiophenyl complexes towards DNA polymerase: synthesis, characterization, eukaryotic DNA and Hartree–Fock computation15
Exploring the inhibitory potential of novel bioactive compounds from mangrove actinomycetes against nsp10 the major activator of SARS-CoV-2 replication14
Ultrasensitive nanohybrid electrochemical sensor to detect LipL32 gene of Leptospira interrogans14
Spectrofluorimetric determination of α-difluoromethylornithine through condensation with ninhydrin and phenylacetaldehyde: application to pharmaceutical cream and spiked urine samples14
Development of fully bio-based pectin/curcumin@bio-MOF-11 for colon specific drug delivery14
Fluorine-a small magic bullet atom in the drug development: perspective to FDA approved and COVID-19 recommended drugs14
Synthesis, spectral characterization and biological activities of Ag(I), Pt(IV) and Au(III) complexes with novel azo dye ligand (N, N, O) derived from 2-amino-6-methoxy benzothiazole14
A comparative study of the effect of organic dopant ions on the electrochemical and chemical synthesis of the conducting polymers polyaniline, poly(o-toluidine) and poly(o-methoxyaniline)14
Green microextraction approach focuses on air-assisted dispersive liquid–liquid with solidified floating organic drop for preconcentration and determination of toxic metals in water and wastewater sam14
Novel A-π-D-π-A structure two-photon polymerization initiators based on phenothiazine and carbazole derivatives14
Recent development in chemosensor probes for the detection and imaging of zinc ions: a systematic review14
Synthesis of different nanometals using Citrus Sinensis peel (orange peel) waste extraction for valuable functionalization of cotton fabric14
An optoelectronic study to design better benzodithiophene (BDT) donor unit based non-fullerene organic solar cells (OSCs): the DFT approaches14
Effectiveness of ionic liquids in extractive–oxidative desulfurization of liquid fuels: a review14
Spectrophotometric determination of trace amounts of Sb(III) and Sb(V) in water and biological samples by in-tube dispersive liquid–liquid microextraction and air-assisted liquid–liquid microextractio13
Green synthesis of silver nanoparticles using Diplazium esculentum extract: catalytic reduction of methylene blue and antibacterial activities13
Theoretical investigation on the adsorption of melamine in Al12/B12-N12/P12 fullerene-like nanocages: a platform for ultrasensitive detection of melamine13
Caryophyllene and caryophyllene oxide: a variety of chemical transformations and biological activities13
Nanoconducting polymer: an effective adsorbent for dyes13
Adsorption behavior of tetracycline on carboxymethyl starch grafted magnetic bentonite13
A review on the industrial wastewater with the efficient treatment techniques13
Aggregation induced emission of chalcones13
Anti-metastatic cancer activity of ultrasonic synthesized reduced graphene oxide/copper composites13
Conducting polypyrrole-coated macroporous melamine sponges: a simple toy or an advanced material?13
Polyacrylamide as a corrosion inhibitor for mild steel in 2 M phosphoric acid: experimental and theoretical studies13
Impacts of channel wall twisting on the mixing enhancement of a novel spiral micromixer13
Recent advances in siloxanes removal from biogas and their efficiency: a short review12
Interaction between favipiravir and hydroxychloroquine and their combined drug assessment: in silico investigations12
Oxidative desulfurization of dibenzothiophene over highly dispersed Mo-doped graphitic carbon nitride12
Rubus ellipticus fruits extract-mediated cuprous oxide nanoparticles: in vitro antioxidant, antimicrobial, and toxicity study12
Preconcentration of heavy metal ions on magnetic multi-walled carbon nanotubes using magnetic solid-phase extraction and determination in vegetable samples by electrothermal atomic absorption spectrom12
Fabrication of multifunctional chitosan-Guar-Aloe Vera gel to promote wound healing12
Synthesis of ZnO nanoparticles mediated by natural products of Acanthus sennii leaf extract for electrochemical sensing and photocatalytic applications: a comparative study of volume ratios12
Introducing a novel photo-induced nanozymatic method for high throughput reusable biodegradation of organic dyes12
Green starch/graphene oxide hydrogel nanocomposites for sustained release applications12
Analytical and in silico study of the inclusion complexes between tropane alkaloids atropine and scopolamine with cyclodextrins12
Simulation and optimization of separation section in methanol to olefin (MTO) process based on statistical approach12
Design of novel radiotracer 99mTcN-tetrathiocarbamate as SPECT imaging agent: a preclinical study for GFR renal function12
Eco-friendly synthesis and characterizations of Ag/AgO/Ag2O nanoparticles using leaf extracts of Solanum elaeagnifolium for antioxidant, anticancer, and DNA cleavage activities12
Carbon-based selenium: an easily fabricated environmental material for removing lead from the electrolytic wastewater11
Enhanced keratin extraction from wool waste using a deep eutectic solvent11
Value-added chemicals from sugarcane bagasse using ionic liquids11
Green extraction of flavonoids and phenolic acids from elderberry (Sambucus nigra L.) and rosemary (Rosmarinus officinalis L.) using deep eutectic solvents11
Carboxymethyl cellulose-coated HKUST-1 for baclofen drug delivery in vitro11
Combine effect of graphene oxide, pure-bore and sodium alginate on rheological and filtration properties and cutting carrying capacity of water-based drilling fluid11
A validated method to assess glutathione peroxidase enzyme activity11
Fabrication of copper oxide nanoparticles via microwave and green approaches and their antimicrobial potential11
Study on the formation and evolution mechanism of dust deposition on solar photovoltaic panels10
Chitosan as adsorbent for removal of some organic dyes: a review10
Chitosan-functionalized Fe3O4@SiO2 nanoparticles as a potential drug delivery system10
The inhibitory potency of isoxazole-curcumin analogue for the management of breast cancer: A comparative in vitro and molecular modeling investigation10
4E assessment and 3D parametric analysis of an innovative liquefied natural gas production process assisted by a diffusion–absorption refrigeration unit10
Crystallographic analysis of biphasic hydroxyapatite synthesized by different methods: an appraisal between new and existing models10
Interaction of ionic liquids with human serum albumin in the view of bioconcentration: a preliminary study10
Synthesis of LDH/Alginate composite beads as a potential adsorbent for phosphate removal: kinetic and equilibrium studies10
Gum Arabic-modified Mn-doped CuS nanoprisms for cancer photothermal treatment10
Multiple linear regression to predict the brightness of waste fibres mixtures before bleaching10
Sol–gel preparation of spinel ferrites/polyaniline composites for electromagnetic interface shielding10
Green synthesis of ZnO NPs using Timur (Zanthoxylum armatum DC.) plant extract for antimicrobial and dye degradation applications10
Cathodoluminescence and photoluminescence of BaTa2O6:Sm3+ phosphor depending on the sintering temperature10
Changes in Pakistan crude oil properties contaminated by water-based drilling fluids with varying KCL concentrations10
Absorption spectra of coumarin and its derivatives10
Theoretical investigation on the intermolecular interactions between 3-nitro-1,2,4-triazol-5-one and 2,6-diamino-3,5-dinitropyrazine-1-oxide using DFT methods10
Multifactor optimization for treatment of textile wastewater using complex salt–Luffa cylindrica seed extract (CS-LCSE) as coagulant: response surface methodology (RSM) and artificial intelligence alg10
Synthesis, characterization, in vitro antibacterial, and anticancer studies of Ag(I)-N-heterocyclic carbene (NHC) complexes10
Synthesis and characterization of brush-type polyβ-alanine-grafted polymethyl methacrylate using "grafting through" method9
Structure–property relationships in para-substituted nitrobenzofurazans: electrochemical, optical, and theoretical analysis9
Coumarins from carcinogenic phenol: synthesis, characterization, in silico, biosafety, anticancer, antioxidant, and anti-inflammatory assessments9
Synthesis, antiulcerative, and anti-inflammatory activities of new campholenic derivatives-1,3-thiazolidin-4-ones, 1,3-thiazolidine-2,4-diones, and 1,3-thiazinan-4-ones9
Spectrometric analysis, phytoconstituents isolation and evaluation of in vitro antioxidant and antimicrobial activities of Tunisian Cistanche violacea (Desf)9
The anti-COVID-19 drug Favipiravir: Degradation, Method development, Validation, NMR/LC–MS characterization, and In-vitro safety evaluation9
Synthesis, in vitro thymidine phosphorylase activity and molecular docking study of thiadiazole bearing isatin analogs9
Conducting polymer-based electro-responsive smart suspensions9
3D flower-like BiOBr prepared via solvothermal method for methanol oxidation and supercapacitor application9
Fabrication of hybrid membranes based on poly(ether-sulfone)/Materials Institute Lavoisier (MIL-53)(Al) and its enhanced CO2 gas separation performance9
Structure-based docking, pharmacokinetic evaluation, and molecular dynamics-guided evaluation of traditional formulation against SARS-CoV-2 spike protein receptor bind domain and ACE2 receptor complex9
The removal of COD in industrial wastewater by electro-persulfate process using central composite design9
Groundwater quality assessment and its suitability for drinking and agricultural purpose, Dindigul taluk, Tamilnadu, India9
A novel tetraphenylethylene-functionalized arylimidazole AIEgen for detections of picric acid and Cu2+9
Synthesis and properties of Sn-doped α-FeOOH nanoparticles9
Estimation of hydrogen peroxide effectivity during bleaching using the Kappa number9
Glycolysis optimisation of different complex PET waste with recovery and reuse of ethylene glycol9
ANOVA and DOE of comparative studies of Cu/Mn effect on corrosion features of CoCrFeNi high entropy alloy immersed in different acidic media9
Madhuca longifolia leaves-mediated palladium nanoparticles synthesis via a sustainable approach to evaluate its biomedical application8
Analysis of structural and biomimetic characteristics of the green-synthesized Fe3O4 nanozyme from the fruit peel extract of Punica granatum8
Exploring bimetallic Au–Ag core shell nanoparticles reduced using leaf extract of Ocimum tenuiflorum as a potential antibacterial and nanocatalytic agent8
Spray pyrolysis-assisted fabrication of Eu-doped ZnO thin films for antibacterial activities under visible light irradiation8
Aptamer labeled nanozyme-based ELISA for ampicillin residue detection in milk8
ROS-mediated antibacterial response of ZnO and ZnO containing cerium under light8
Decomposition mechanism of hydroxychloroquine in aqueous solution by gamma irradiation8
An in situ modification sorbent for magnetic dispersive micro solid-phase extraction of anti-inflammatory drugs in the human urine sample before their determination with high-performance liquid chroma8
Determination of silver nanoparticles in cosmetics using single particle ICP-MS8
Study on foam extinguishing agents based on hydrocarbon and perfluorinated branched short-chain fluorocarbon surfactants mixed system8
Proposal and energy/exergy analysis of a novel cryogenic air separation configuration for the production of neon and argon8
Leaf extract-mediated synthesis of Mn-doped CuO nanoparticles for antimicrobial, antioxidant and photocatalytic applications8
Rapid synthesis of silver nanoparticles using the extract of Psidium guajava leaf based on light-emitting diodes irradiation8
Enhanced visible light photocatalytic CO2 reduction over direct Z-scheme heterojunction Cu/P co-doped g-C3N4@TiO2 photocatalyst8
Facilely prepared conductive hydrogels based on polypyrrole nanotubes8
Immobilization of cellulase on magnetized multiwall carbon nanotubes (m-MWCNTs) synthesized via eco-friendly (water-based) method8
Carbon quantum dots with green fluorescence as a probe for detecting uric acid8
Structural, optical, and luminescence properties of Ni2+-doped ZnO–CdS nanocomposite: synthesis and investigations for green light emission8
Corrosion behavior of Al12Cr12Fe35Mn21Ni20 high entropy alloy in different acidic media8
Synthesis and characterization of hydroxyapatite and composite based on it with collagen/alginate8
Probing the dc electrical resistivity and magnetic properties of mixed metal oxides Cr3+ substituted Mg–Zn ferrites8
Convenient route to benzo[1,2,3]selenadiazole–isoxazole hybrids and evaluation of their in vitro cytotoxicity8
Evaluation of small-scale liquefied natural gas (SSLNG) processes: advanced exergoeconomic analysis8
Bionic flow field research and optimization of PEMFC with multi-branch veins8
Impact of dissolved rare gases (Ar, Xe and He) on single-bubble sonochemistry in the presence of carbon tetrachloride8
Giant milkweed plant-based copper oxide nanoparticles for wound dressing application: physicochemical, bactericidal and cytocompatibility profiles8
Zeolite-Y-based catalyst synthesis from Nigerian Elefun Metakaolin: computer-aided batch simulation, comparative predictive response surface and neuro-fuzzy modelling with optimization8
Long-term electrochemical stability of polyaniline- and polypyrrole-based hydrogels8
Chemical, electrochemical, thermodynamic and adsorption study of EN8 dual-phase steel with ferrite-martensite structure in 0.5 M H2SO4 using pectin as inhibitor8
Assessment of crystallite size of UV-synthesized hydroxyapatite using different model equations8
Fabrication and evaluation of gelatin-PVA-co-poly(2-acrylamido-2-methylpropane sulfonic acid)-based hydrogels for extended-release of sitagliptin and metformin by employing response surface methodolog8
Metal nanoparticles: biomedical applications and their molecular mechanisms of toxicity8
β-galactosidase as an industrial enzyme: production and potential8
Anthracene modified graphene for C60/C70 fullerenes capture and construction of energy storage materials8
Phytogenic fabrication of CeO2@SnO2 heterojunction nanostructures for antioxidant studies8
Recent green synthetic approaches toward Ullmann reaction: a review8
Correlating the charge density and structural fabrication of new organic dyes to create visible light harvesting materials with tunable NLO refining: insights from DFT8
New trinuclear nickel(II) complexes as potential topoisomerase I/IIα inhibitors: in vitro DNA binding, cleavage and cytotoxicity against human cancer cell lines8
Homology modelling, vHTS, pharmacophore, molecular docking and molecular dynamics studies for the identification of natural compound-derived inhibitor of MRP3 in acute leukaemia treatment7
Antioxidant and polyphenol content of different Vitis vinifera seed cultivars and two facilities of production of a functional bakery product7
A natural nanogel with higher efficacy than a standard repellent against the primary malaria mosquito vector, Anopheles stephensi Liston7
Synthesis, structural characterization, thermal analysis, DFT, biocidal evaluation and molecular docking studies of amide-based Co(II) complexes7
A new Hg(II) hybrid compound (C6H9N2)[Hg6Cl13]·H2O elaboration, crystal structure, spectroscopic, thermal, and DFT theoretical calculations7
Magnetic dispersive micro-solid-phase extraction for the preconcentration and extraction of lead (II) and cadmium ions from environmental samples using magnetic CoFe2O4 @ SiO2@4-aminobenzoic acid-func7
Effect of corrosion inhibitors on SA106 Grade B carbon steel in H2SO4-N2H4 solution for the hydrazine-based reductive metal ion decontamination process7
Synthesis and characterization of superabsorbent hydrogels from waste bovine hair via keratin hydrolysate graft with acrylic acid (AA) and acrylamide (AAm)7
Optimizing and control of effective synthesize parameters for Fe3O4 nanoparticles using response surface methodology7
Surface-functionalized fluorescent carbon dots (CDs) for dual-mode detection of lead ions7
New correlations for the solubility of anticancer drugs in supercritical carbon dioxide7
Silver nanopentagons-based colorimetric sensor for high-selective chromium(III) detection in aqueous solution with polyvinylpyrrolidone and citrate7
Synthesis, crystal growth and characterization of organic nonlinear optical materials methoxy-N,N-diphenylbenzamides7
Low-cost, sustainable, and high-capacity magnetite–cellulose adsorbent from Ramie stem (Boehmeria nivea L.) as oil spill solution7
Bioaccessibility study and simultaneous quantification of endocrine disruptors (bisphenol A and phthalates) in utensils and toys for infants using HPLC–UV7
Coproduction of polyhydroxyalkanoates and exopolysaccharide by submerged fermentation using autochthonous bacterial strains7
A new phenothiazine-based fluorescent probe for detection of hydrazine with naked-eye color change properties7
Efficiency of modified plant guar gum as aid coagulant for removal of diazinon from aqueous solution: optimization by response surface methodology7
Hydrothermal synthesis of Fe-doped ZnAl2O4 nanosheets: bandgap engineering and room temperature ferromagnetism7
CuCo2O4 as affective adsorbent for dispersive solid-phase extraction of lead from food, cigarette and water samples before FAAS detection7
Charring of pine needles using a portable drum reactor7
Employing electro-peroxone process for industrial wastewater treatment: a critical review7
Preparation of silver with an ultrathin molecular imprinted layer for detection of carbendazim by SERS7
Colorimetric and selective turn-on fluorescent sensor for cyanide via aggregation-induced enhanced emission (AIEE)7
Review of recent advancements in fluorescent chemosensor for ion detection via coumarin derivatives7
Adsorption onto zeolites: molecular perspective7
A critical review in the features and application of photocatalysts in wastewater treatment7
Synthesis of magnetite nanoparticle from potato peel extract: its nanofluid applications and life cycle analysis7
Low-temperature destructive hydrodechlorination of long-chain chlorinated paraffins to diesel and gasoline range hydrocarbons over a novel low-cost reusable ZSM-5@Al-MCM nanocatalyst: a new approach 7
A garlic oil-based organo-hydrogel for use in pH-sensitive drug release7
Microwave-assisted synthesis of N-doped carbon quantum dots for detection of methyl orange in saffron7
The scavenging effect of curcumin, piperine and their combination against physiological relevant reactive pro-oxidant species using in vitro non-cellular and cellular models7
Comparison of the gaseous benzene adsorption capacity by activated carbons from Fraxinus excelsior L. as a lignocellulosic residual7
Controlled preparation of Fe3O4/PLA composites and their properties7
Fabrication, characterization and corrosion feature evaluation of mild steel in 1 M HCl by nanoparticle-modified activated carbon7
TD-DFT calculations and two-dimensional poly (ortho phenylenediamine-co-meta-phenylene diamine) for polymeric solar cell applications7
On mixed metric dimension of polycyclic aromatic hydrocarbon networks7
Investigation of natural gas dehydration process using triethylene glycol (TEG) based on statistical approach6
Physicochemical properties of TIO2, ZrO2, Fe3O4 nanocrystalline adsorbents and photocatalysts6
Efficacy of postbiotics against free radicals and UV radiation6
Integrated electrocoagulation–photoelectrocatalytic oxidation for effective treatments of aqueous solution bisphenol-A using green-synthesized ZnO nanoparticles6
Formulation and evaluation of surface-fluorinated microsized-TiO2 based self-cleaning cement: characterization, self-cleaning, depollution and antimicrobial study6
A highly sensitive electrochemical biosensor for dopamine and uric acid in the presence of a high concentration of ascorbic acid6
Influence of the oxidation behavior of Ti–6Al–4V alloy in dry air on the oxide layer microstructure6
Preparation and characterization of intelligent color-changing nanosensor based on bromophenol blue and GONH2 nanosheet for freshness evaluation of minced Caspian sprat (Clupeonella cultriventris casp6
Algerian wild fennel essential oils: chromatographic profile, acute toxicity, antioxidant, and antimicrobial activities6
A colorimetric biosensor based on peroxidase-like activity of CuO nanoparticles for simultaneous detection of microRNAs6
Sensitive determination of Anastrozole and Letrozole in urine samples by novel magnetic nanoparticles containing tetraethylenepentamine (TEPA) prior to analysis by high-performance liquid chromatograp6
Antioxidant, antimicrobial, and cytotoxic potential of Euphorbia royleana extract-mediated silver and copper oxide nanoparticles6
Synthesis, characterization, physicochemical studies, and antibacterial evaluation of surfactant-based Schiff base transition metal complexes6
pH-Sensitive mesoporous bisphosphonate-based TiO2 nanoparticles utilized for controlled drug delivery of dexamethasone6
Proliferation and osteogenic differentiation of mesenchymal stem cells on three-dimensional scaffolds made by thermal sintering method6
Self-effervescence-assisted dispersive micro-solid-phase extraction combined with dispersive liquid–liquid micro-extraction for the extraction and preconcentration of some phthalate and adipate esters6
e-Pharmacophore model-guided design of potential DprE1 inhibitors: synthesis, in vitro antitubercular assay and molecular modelling studies6
Removal of cyanide from the gold cyanidation plant tailings using graphene-based magnetic nanocomposites6
Adsorption and fluorescence detection of nonylphenol in soil samples by cotton fabrics coated with molecularly imprinted polymers/carbon dots6
Rod-shaped ZnO nanoparticles: synthesis, comparison and in vitro evaluation of their apoptotic activity in lung cancer cells6
Photovoltaic performance properties, DFT studies, and synthesis of (E)-3-(diphenxy) acrylic acid substituted phthalocyanine complexes6
Porous Co3O4 nanospheres synthesized via solution combustion method for supercapacitors6
Zirconium metal organic framework/aloe vera carrier loaded with naproxen as a versatile platform for drug delivery6
Cellulase immobilized onto amino-functionalized magnetic Fe3O4@SiO2 nanoparticle for poplar deconstruction6
Rare-earth ions as antibacterial agents for woven wool fabric6
Nitrogen-containing carbon enriched with tungsten atoms prepared by carbonization of polyaniline6
Preparation of graphitic carbon nitride g-C3N4-HMCM-22 composite catalysts and enhanced para-selectivity in m-xylene isomerization6
Ammonia leaching of MoO3 concentrate: finding the reaction mechanism and kinetics analysis6
Box–Behnken design assisted by theoretical mass and heat transfer using for multi-responses optimization of membrane distillation process6
Manganese doped Ceria (Ce1−xMnxO2−δ (x = 0–0.3)) catalysts synthesized by EDTA–Citrate method for soot oxidation activity6
Preparation and luminescent properties of a novel orange-red phosphor Sr2RE8(SiO4)6O2:Eu(2+,3+) (RE = Y, Gd, La) for LEDs6
Recent advancements in organic chemosensors for the detection of Pb2+: a review6
Determination of indium in water samples using solid-phase extraction with modified silica gel and slurry sampling with electrothermal atomic absorption spectrometry6
Stabilization of hexachloride net with mixed Sn(IV) metal complex and 2,3-dimethylanilinium organic cation: elaboration, optical, spectroscopic, computational studies and thermal analysis6
Determination of Hansen solubility parameters of refined sugarcane wax6
Phytosynthesis, characterization and catalytic activity of Sacha inchi leaf-assisted gold nanoparticles6
Biofuels additives derived via clay supported heteropoly acid catalyzed etherification of glycerol with t-butanol-biomass to liquid oxygenates6
Visible light-induced synergic antimicrobial activity of silver nanoparticles/methylene blue nanohybrids encapsulated in chitosan and pluronic polymers6
Strategic fabrication of para diethylamine calix[4]arene-functionalized CuO nanostructures: a metal–organic framework-based sensor for quantification of antipyrine6
Studies on the effect of crystalline Fe2O3 on OER performance of amorphous NiOOH electrodeposited on stainless steel substrate6
Design, synthesis, and antifungal activity of flavonoid derivatives containing thiazole moiety6
Effects of polyethylene glycol additive on zinc phosphate conversion coating of carbon steel6
Biogenic synthesis of platinum nanoparticles6
A review of processes for separation and utilization of fluorine from phosphoric acid and phosphate fertilizers6
Facile synthesis of high quality hard carbon anode from Eucalyptus wood for sodium-ion batteries6
Experimental and theoretical Fourier transform infrared and Raman spectroscopy, density functional theory, antibacterial activity and molecular docking studies on 1-(4-methoxyphenyl)-1H-imidazole6
Low-cost ternary composite of graphite, kaolinite and cement as a potential working electrode for general electrochemical applications6
3,3′,5,5′-Tetramethylbenzidine and polyetherimide decorated silver nanoparticles for colorimetric Mn2+ ions detection in aqueous solution6
Improvement of the reactivity of triethyl phosphate and structural behavior of hydroxyapatite versus the synthesis conditions by sol–gel route6
Extraction and quantification of some valuable flavonoids from pinecone of Pinus brutia via Soxhlet and Supercritical CO2 extraction: a comparison study6
Preconcentration and determination of four antibiotics in biological samples using nanofluid-assisted magnetic dispersive micro-solid-phase extraction coupled with high-performance liquid chromatograp6
Antioxidant activity and α-glucosidase inhibitability of Distichochlamys citrea M.F. Newman rhizome fractionated extracts: in vitro and in silico screenings6
Novel Polydimethylsiloxane membranes impregnated with SAPO-34 zeolite particles for gas separation6
Dissolution of molybdenite roasting flue dust in sulfuric acid: kinetics and mechanism for molybdenum and rhenium leaching6
Novel chitosan–naphthalimide–amino acid fluorescent powder for selective detection and removal of Hg2+/Hg+ and Fe2+ in aqueous solution5
Potential metal chelating ability of mycosporine-like amino acids: a computational research5
0.041247129440308