Fuel Processing Technology

Article	Citations
Aluminum‑yttrium oxides supported iron for effective catalytic reforming of toluene: Promotion roles of yttrium	228
Ni-Fe-Al LDH derived Ni Fe nanosheet for green diesel production from lipid hydrotreatment	145
Editorial Board	143
Techno-economic analysis of cogeneration systems based on internal-combustion engines fueled with syngas from biomass gasification	139
A 3D computational study of the formation, growth and oxidation of soot particles in an optically accessible direct-injection spark-ignition engine using quadrature-based methods of moments	137
Chemistry of CO2-philic materials in enzyme-based hybrid interfacial systems: Implications, strategies and applications	125
Direct reduction of vanadium titanium pellets using ammonia as a reductant: Thermodynamics, characteristics, and kinetics analysis	120
A study on the chemical looping combustion of sewage sludge: The emission of NOx and its precursors	118
Production of renewable fuel from CO2 by Co3O4/Cr doped MgAl–LDH p-n heterojunction catalyst	115
Moving window correlation coefficient differences partial least squares (MWCC-DPLS) quantitative calibration method based on spectral differences between calibration samples: Application to the fast d	105
Research progress on chemical looping reforming of macromolecular components of volatiles from biomass pyrolysis based on decoupling strategy	103
On-line synthesis of highly stable product-derived catalysts applied in DEC/EMC synthesis without azeotrope generation	93
Impact of press channel diameter-to-length ratio on the mechanical properties of biomass pellets during storage	92
Effect of transition metal on the physical and hydrogen storage properties of the dynamically stable novel ARhH3 (A = Mg, Ca, and Sr) hydrides for solid-state hydrogen storage application: A DFT and A	92
The reaction characteristics and mechanism of polymer non-catalytic reduction (PNCR) for NOx removal	91
Hybrid evolutionary machine learning framework optimizing biochar production in biomass pyrolysis	90
Roles of metal oxide overlayers on hydrotalcite-structured Ni-MgAlOx for dry reforming of CH4 with CO2	89
Addition of jabuticaba peel extract with antioxidant properties in biodiesel	89
Migration of lattice oxygen during chemical looping dry reforming of methane with Ca2Fe2O5/Zr0.5Ce0.5O2 oxygen carrier	88
Effect of torrefaction pretreatment on the selectivity improvement of lignin pyrolysis products	88
Plasma assisted dry reforming of methane: Syngas and hydrocarbons formation mechanisms	88
A new nitrogen-enriched biochar modified by ZIF-8 grafting and annealing for enhancing CO2 adsorption	87
The efficient promoting hydrodeoxygenation of bioderived furans over Pd/HPW-SiO2 by phosphotungstic acid	84
Sandwich Ni-phyllosilicate@doped-ceria for moderate-temperature chemical looping dry reforming of methane	82
Ni-enhanced red mud oxygen carrier for chemical looping steam methane reforming	82

Supercritical water liquefaction of mixed plastic waste ‘contaminated’ with PET (polyethylene terephthalate): Influence on yields and product composition	80
Fluidized bed combustion characteristics of high-ash coal char under O	80
Catalytic transfer hydrogenolysis mechanism of benzyl phenyl ether over NiCu/Al2O3 using isopropanol as hydrogen source	79
The investigation of adsorption desulphurization performance using bimetallic Cu Ce and Ni Ce mesoporous Y zeolites: Modification of Y zeolite by H4EDTA-NaOH sequential treatment	78
A critical review on the economic aspects and life cycle assessment of biodiesel production using heterogeneous nanocatalysts	78
Effect of biochar support on the catalytic performance of Fe-based catalysts for CH4 cracking	75
Thermo-economic feasibility of heliostat and parabolic trough collector integration with optimized configuration of post-combustion carbon capture for steam methane reforming	75
Lignocellulosic biomass pyrolysis: A review on the pretreatment and catalysts	73
Characterizing potassium release under turbulent conditions during biomass stream combustion: A comparative analysis of different pretreatments	71
Effect of transition metals and homogeneous hydrogen producers in the hydrothermal liquefaction of sewage sludge	71
Highly selective catalytic hydrodeoxygenation of guaiacol to benzene in continuous operation mode	70
Editorial Board	70
Editorial Board	69
Editorial Board	68
The degradation mechanism analysis of alkali metal adsorption-induced coke	66
Chemical process of multiphase system in lignin-biochar co-pyrolysis for enhanced phenol recovery	65
Mechanism of CO2 capture by ethanol-biochar functionalized cross-linking enhanced ammonia	65
MILD combustion of co-firing biomass and pulverized coal fuel blend for heterogeneous fuel NO and PM2.5 emission reduction	64
Kinetic study of asphaltenes phase separation in supercritical water upgrading of heavy oil	64
Adsorption of phenol from aqueous solution on activated carbons prepared from antibiotic mycelial residues and traditional biomass	63
Efficient conversion of cellulose to 5-hydroxymethylfurfural using a bifunctional hydrophobic SBA-15 catalyst: The effects of hydrophobicity, morphology and acidity	62
Comparison of hydrocracking and cracking of pyrolytic lignin over different Ni-based catalysts for light aromatics production	61
Investigation on iron ore for the oxygen carrier aided combustion	60
Formation of fine particles (PM10) from Zhundong high‑sodium coal at entrained flow gasification condition in a flat-flame burner reactor	60
Characteristics of nitrogen oxide emissions from combustion synthesis of a CuO oxygen carrier	59
Evaluation of ilmenite, manganese ore, LD slag and iron sand oxygen carriers for chemical looping gasification with microalgae	57
Research progress of ammonia combustion toward low carbon energy	57
HydroStor-PMX: A multi-phase hybrid system for high-density hydrogen storage via pressure-modulated MXene frameworks	57
One-pot synthesis of self S-doped porous carbon for efficient CO2 adsorption	57
Fuel production from liquefaction of polypropylene in n-hexane solvent	57
Experimental and numerical investigation on effect of fluidization degree and temperature on bed agglomeration during bioslurry fast pyrolysis in a fluidized bed	56
Evolution of the hydrothermal aging mechanism in Ni/CeO2 catalysts for N2O decomposition based on surface effect	55
High-quality biochar from the catalytic pyrolysis of Brachychiton seeds: Optimization and characterization	55
The influence of lanthanum (La) promoter on Mo/Al2O3 for the catalytic synthesis of methyl mercaptan (CH3SH) from COS/H2/H2S	54
Axial pressure impact on pyrolysis behavior of Xinjiang coal: An inspiration for in-situ pyrolysis of tar-rich coal	53
Experimental and numerical studies on the NO reaction pathways of NH3 cofiring with coal volatile matter	52
Controlling the metal-support interaction of Cu/ZnO sorbent to improve its ultra-deep desulfurization performance for thiophene in coke oven gas	51
Valorizing high-fraction bio-oil to prepare 3D interconnected porous carbon with efficient pore utilization for supercapacitor applications	51
Hydrocracking mechanisms of oxygenated plastics and vacuum gasoil blends	49
A new aminobenzoate-substituted s-triazin-based Zr metal organic frameworks as efficient catalyst for biodiesel production from microalgal lipids	49
Evolution of lignin pyrolysis heavy components through the study of representative lignin monomers	49
Low-temperature selective production of propylene from non-oxidative dehydrogenation of propane over unconventional Zr/ZK-5 catalysts	48
Experimental study on removal of mercaptans from gas streams by 1-butyl-3-methyl-imidazolyl alanine	48
Understanding the role of Ni-based single-atom alloys on the selective hydrodeoxygenation of bio-oils	48
Repurposing of propane oxidative-dehydrogenation catalysts to deoxygenation of vegetable oils for green diesel production	47
Numerical investigation of the effect of jet orifice parameters on the combustion process of a turbulent jet ignition rotary engine fueled with methanol/gasoline blends	47
Influence of hydrogen fraction and injection timing on in-cylinder combustion and emission characteristics of hydrogen-diesel dual-fuel engine	46
Enhancement of compression ignition engine performance using waste plastic-derived fuel blended with nanoparticles: An experimental and regression analysis	46
Ni/MOFs-derived α-MoO3 catalyst for renewable hydrogen production and treatment of biogas slurry by aqueous-phase reforming	46
Crude oil conversion to chemicals over green synthesized ZSM-5 zeolite	46

Enhanced catalytic stability of non-stoichiometric Cu–Al spinel catalysts for dimethyl ether synthesis from syngas: Effect of coordination structure	46
Lignin meets MOFs: Design of spherical carbon-based NiCo catalysts for catalytic hydrogen transfer of 5-hydroxymethylfurfural to 5-methylfurfuryl alcohol	45
Selective hydrodeoxygenation of BHET using bimetallic Pt–Sn/γ-Al2O3 catalysts: Catalyst design, reaction pathway, and performance evaluation	45
Torrefaction of spent coffee grounds for solid fuel production: A review	45
Mechanism of 5-hydroxymethylfurfural preparation from glucose by a nonmetallic Lewis/Brønsted bifunctional solid acid catalyst CNs-PF6 under photo-induction	45
Carbon material-TiO2 for photocatalytic reduction of CO2 and degradation of VOCs: A critical review	45
Upcycling of EVA resin from photovoltaics into supercapacitor material and combustible gas by autogenic pressure pyrolysis	44
Improve removal efficiency of PM 1 depending on collision enhancement and agglomeration effect	44
Preparation and characterization of carbon block with coal tar pitch and phenolic resin as mixed binder	44
Clean smoldering biowaste process: Effect of burning direction on smoke purification by self-sustained flame	44
Heteroatom-doping regulated Mg6MnO8 for improving C2+ hydrocarbons during chemical looping oxidative coupling of methane	44
Understanding the effects of cellulose fibers from various pre-treated barley straw on properties of aerogels	43
Coupling effect of pyrolysis temperature and condensing temperature on the enrichment of high value-added phenolic compounds in bio-oil from pyrolysis of crop straw	43
Catalytic cracking of model compounds of bio-oil: Characteristics and mechanism research on guaiacol and acetic acid	43
Designing hydrotalcite-derived CoAlO catalysts for highly selective catalytic CO2 methanation	43
Co-Zn bimetallic oxide & hydroxyfluoride nanowires: highly active catalyst for catalytic transfer hydrogenation of furfural	43
Systematic modulating carbon metabolism to improve α-farnesene production in Pichia pastoris	43
Interface engineering of PtCuMn nanoframes with abundant defects for efficient electrooxidation of liquid fuels	43
Synergistic basic-acid catalytic upgrading of lignin pyrolysis volatiles over CaO-HZSM-5	43
Development and turbine engine testing of coconut oil-based biojet fuel	42
Facilitating electroreduction CO2-to-C2H4 over doped CuO nanospheres assisted by nitrogen species and oxygen vacancies	42
Conversion of lignin-derived ketonic intermediate to biofuel products: Syngas-assisted vs. Conventional hydrotreating	42
Multi-strategy modeling integrating kinetics mechanism of cracking and pyrolysis and unsupervised dual-stage attention long and short-term memory network	42
Comparison of PM10 emission from co-combustion of Platanus orientalis leaf and wood in different seasons with coal	41
Efficient synthesis of biodiesel from Hyoscyamus niger L. seed oil by base catalysis	41
Preparation of renewable porous carbons for CO2 capture – A review	41
Effect of sulfur and carbon in the pyrolysis volatiles on the activity of Fe-Ni/biochar	41
Catalytic depolymerization of lignin via transfer hydrogenation strategy over skeletal CuZnAl catalyst	41
Carbon monoxide (CO) and particulate matter (PM) emissions during the combustion of wood pellets in a small-scale combustion unit – Influence of aluminum-(silicate-)based fuel additivation	41
Editorial Board	40
Comparative study on combustion and emission characteristics of methanol/gasoline blend fueled DISI engine under different stratified lean burn modes	40
High-temperature filtration demonstration applying Fe-Al intermetallic membrane for a 410 t/h scale coal-fired power plants	40
Ecofriendly and cost-effective biodiesel production from water containing feedstocks through electrolysis- a review	40
Editorial Board	39
Systematic optimization of the Ni-to-Mo ratio in bimetallic Ni–Mo₂C catalysts for efficient selective hydrogenation of levulinic acid to γ-valerolactone	39
Facile transformation of heavy oil residues into carbon composites used for high-performance supercapacitors	39
Production of solid fuel in the vacuum distillation of bio-oil	39
Numerical simulation and mathematical models of ash deposition behavior considering particle properties and operating conditions	39
Relationships between char reactivity and char structure from a suite of organic model compounds	39
Potassium interactions with copper slag and magnetite fines in chemical-looping processes	39
Pt Single Atom-Anchored CeOx/SAPO-11 for Highly Efficient Hydroisomerization of n-Heptane	39
Solid-liquid contact characteristics and microscopic wetting mechanism between coal and water in gas atmosphere	38
Experimental study on the combustion and emission characteristics of thermal storage-assisted load reduction in a circulating fluidized bed	38
Activation of mixed sawdust and spirulina with or without a pre‑carbonization step: Probing roles of volatile-char interaction on evolution of pyrolytic products	38
High yield methane production from the hydrogenation of CO₂ using non-thermal plasma/catalysis	38
Production of aviation fuel with negative emissions via chemical looping gasification of biogenic residues: Full chain process modelling and techno-economic analysis	38
Enhancing pyrolysis of automobile shredder residue through torrefaction: Impact on heavy components formation in oil	38
Catalytic conversion of eucalyptus pre-hydrolysis liquor-derived xylo-oligosaccharides to furfural using dual-acidic functionalized covalent organic frameworks	38
Catalytic hydrocracking of pyrolytic lignin in supercritical methanol over nickel‑ruthenium/ceria-deposited HZSM-5	38
Effect of diffusion and metal-acid synergy on catalytic behavior of the Pd/Hierarchical SAPO-31 nanoparticles for hydroisomerization of n-hexadecane	37
Self-template mechanism of “selective silicon dissolution” for the construction of functional rice husk biochar	37
Thermochemical technologies for conversion of biomass and waste into light olefins (C2-C4)	37
Engineering support-dependent structures of Co catalysts on MgO, MgAl, and Al₂O₃ for selective transformation of levulinic acid to γ-valerolactone	37
Combined steam and CO2 reforming of ethanol over Ni–Cu/ZrO2 catalyst: Experimental and statistical optimization for sustainable syngas and hydrogen production	37
Impact of potassium on bio-ash slagging and resultant slag flowing characteristics under mild reducing environment	36
A review of chemical viscosity reducers for heavy oil: Advances and application strategies	36
A green alternative: Engine performance and emission effect analysis of linalool-derived biodiesel with B₄C nanoparticles for sustainable fuel solutions	36
A simultaneous depolymerization and hydrodeoxygenation process to produce lignin-based jet fuel in continuous flow reactor	36
Insight into the reactivity of aromatic-rich fractions co‑carbonized with polyethylene glycol for preparation of isotropic pitch with superior spinnability	36
Synergistic removal of HCl and Hg0 in pyrolytic waste plastic gas on Ca and Co loaded carbon aerogel at room temperature	36
Recent advances on solid acid catalyic systems for production of 5-Hydroxymethylfurfural from biomass derivatives	36
Influence of fly ash components on the performance of recycled copper-based oxygen carriers for chemical looping combustion	36
Slurry-phase hydrotreating of vacuum gas oil with Mo-based dispersed catalyst in semi-batch and continuous reactors	36
Development and performance of CeO2 supported BaCoO3−δ perovskite for chemical looping steam methane reforming	35
Regulating surface acid-base balance on NaZSM-5 by Fe modification towards enhanced methanol dehydration to dimethyl ether	35
Gaseous alkali interactions with ilmenite, manganese oxide and calcium manganite under chemical looping combustion conditions	35
Using Mn2+ to inhibit the adverse oxidation of sulfite solutions during the NO2 absorption: Mechanism and kinetic model	35
Microscopic mechanism for the effect of potassium on heterogeneous NO–char(N) interaction: A theoretical account	35
Impact of the type of particle boards on the nitrogen fate during their pyrolysis and combustion	34
Chemistry and potential candidature of metal-organic frameworks for electrochemical energy storage devices	34
Skeletal kinetic mechanism for predicting formation of non-fuel hydrocarbons and soot in ethylene flames – A CFD approach	34
Soot formation mechanism of modern automobile engines and methods of reducing soot emissions: A review	33
Biofuel characteristics of chars produced from rapeseed, whitewood, and seaweed via thermal conversion technologies – Impacts of feedstocks and process conditions	33
Chemometrics to connect feedstock quality, process settings and calorific value of hydrochar through infrared spectra	33
Catalytic pyrolysis of lignin with metal-modified HZSM-5 as catalysts for monocyclic aromatic hydrocarbons production	33
Fabrication of Uio-66-NH2 with 4,6-Diamino-2-mercaptopyrimidine facilitate the removal of Pb2+ in aqueous medium: Nitrogen and sulfur act as the main adsorption sites	33
Facile synthesis of nitrogen-doped interconnected porous carbons derived from reed and chlorella for high-performance supercapacitors	33
Numerical analysis-based evaluation of combustion and gasification characteristics of pulverized coal and coke in the raceway region	33
Pore structure evolution of semi-coke under steam atmosphere in the context of deep underground coal gasification	33
A giant polyoxomolybdate molecular catalyst with unusual Mo6+/Mo5+ synergistic mechanism for oxidation of hydroxyfurfural under atmospheric pressure	33

Pt-Sn/SAPO-11: A preferred high-performance, stable, and regenerable hydrogenation catalyst for Jatropha oil	32
Influence of interaction between biomass inorganic components and volatiles on corncob pyrolysis and char structure	32
A component synergy of flue gas torrefaction of municipal solid waste	32
Evaluation of diesel fuel production from bio-oils hydrodeoxygenation using unsupported MoS2 catalysts	32
Optimization of a low heat rejection engine run on oxy‑hydrogen gas with a biodiesel-diesel blend	32
Comparative study of the catalytic co-pyrolysis of microalgae (Chlorella Vulgaris) and polypropylene with acid and base catalysts toward valuable chemicals production	32
Editorial Board	31
Interface engineering: Graphdiyne (g-CnH2n-2) encapsulation of sulfur-rich Mn-Cd-Prussian blue analog for photocatalytic hydrogen evolution	31
Editorial Board	31
CoxFe1-xFeAlO4-δ as highly active oxygen carriers for enhanced chemical looping hydrogen production	30
Development of dual-functional materials for integrated CO2 capture and utilization by dry reforming of CH4	30
One-step plasma reforming of CO2CH4 into hydrogen and liquid fuels: The roles of Cu and Fe sites on products distribution	30
Power to hydrogen: A geospatial and economic analysis of green hydrogen for UK high-heat industry	30
Palm fatty acid distillate derived biofuels via deoxygenation: Properties, catalysts and processes	30
Environmental and techno-economic analyses of oxygen blast furnace systems integrated with carbon capture and utilization strategy	30
Enhanced ammonia decomposition using a Pd-Ag membrane reactor for high-purity hydrogen production	30
Absorbing oxygen carrier induces phosphorus enrichment in sludge: Preparation and screening	30
Effect of activated biochar as a low-cost catalyst on the quality of catalytic intermediate co-pyrolysis oil from waste polystyrene and green coconut pericarp	30
Preparation of porous biochar from heavy bio-oil for adsorption of methylene blue in wastewater	30
Novel nanowire self-assembled hierarchical CeO2 microspheres loaded with nickel-based catalysts for hydrogen production from steam reforming of glycerol	30
Understanding the deposition mechanism burning Fe - rich Zhundong coal in a 0.4 MW pilot-scale facility	30
Low-temperature DeNOx characteristics and mechanism of the Fe-doped modified CeMn selective catalytic reduction catalyst	30
Upgrading of benzofuran to hydrocarbons by hydrodeoxygenation over nickel–molybdenum carbide catalysts supported inside multi-wall carbon nanotubes	30
A density functional theory study of CH4 oxidation over LaMnO3 oxygen carrier during chemical looping combustion	29
Corrigendum to “Influence of fuel formulation on exhaust emissions from gasoline direct injection vehicle ” [Fuel Processing Technology, 272 (2025), 108215]	29
Integration of stabilized bio-oil in light cycle oil hydrotreatment unit targeting hybrid fuels	29
Tailoring the temperature coefficient of resistance of flame-formed carbon nanoparticle thin films by electric field-assisted deposition	29
Influence mechanism of emulsion collector on the flotation effect of coal gasification fine slag	29
Monitoring technologies for CO₂ storage in coal seams and enhanced coalbed methane recovery: A review of field applications	29
Controlled preparation of Ni–Cu alloy catalyst via hydrotalcite-like precursor and its enhanced catalytic performance for methane decomposition	29
Impregnation of different coals and biomass with rapeseed oil for intensifying their ignition in a heated air stream during oil-free boiler start-up	29
Oxygen-enriched porous carbon derived from acid washed and oxidized lignite via H3PO4 hydrothermal for high-performance supercapacitors	29
Selective catalytic conversion of Kraft lignin into monoaromatic hydrocarbons over niobium oxide catalysts	29
Co3O4-CeO2 for enhanced syngas by low-temperature methane conversion with CO2 utilization via a catalytic chemical looping process	29
Multi-stage pretreatment of hydrothermal liquefaction biocrude oil as a precursor for sustainable aviation fuel production	29
Editorial Board	29
Insights into the superior performance of mesoporous MOFs-derived Cu Mn oxides for toluene total catalytic oxidation	28
Optimal design of catalytic reactors for direct biogas methanation through thermodynamic analysis and 2-D reactor modeling	28
Catalytic hydrogenolysis of diphenyl ether over Ni/AC catalyst: Effect of hydrophilicity modification of activated carbon	28
Microstructure changes and reaction process of cotton at low-temperature oxidation stage	28
Effect of quantitative heat transfer performance on the separation and enrichment of bio-oil components during the selective condensation of biomass pyrolysis vapors	28
Unraveling alkyl-substituted sulfur-containing compound reactivity in hydrodesulfurization via multidimensional mass spectrometry and computational modeling	28
A combined experimental and theoretical study on vanadium-catalytic oxidation of lignin to produce carboxylic acids	28
A highly effective approach to enhance the performance of biomass-derived acid for fructose conversion to 5-hydroxymethylfurfural	28
Promotion effects of FeCu co-doping on Co3O4-based catalysts for linear α-olefins to alcohols	28
Experimental study on the structure and reactivity of char in pressurized O2/H2O atmosphere	27
Effect of biochar substitution on iron ore sintering characteristics based on optimization of fuel distribution through the bed	27
Ion doping engineering of nickel-doped BiOIO3 nanosheets for gaining oxygen vacancy to enhance light absorption	27
Influence of pilot diesel ratio and engine load on combustion behaviour in a biogas-fueled RCCI engine	27
Upgrading of fast pyrolysis bio-oils to renewable hydrocarbons using slurry- and fixed bed hydroprocessing	27
Improving the electrostatic precipitation removal efficiency on fine particles by adding wetting agent during the chemical agglomeration process	27
Pyrolysis of lignocellulosic biomass: Molecular-level insights with online ultrahigh-resolution mass spectrometry	27
Tandem catalytic pyrolysis of mixed plastic packaging wastes to produce BTEX over dual catalysts	27
The retention and speciation transformation mechanisms of chromium during bituminous coal combustion: Effects of inorganic minerals and combustion temperature	27
Investigation on the co-pyrolysis of bamboo sawdust and low-density polyethylene via online photoionization mass spectrometry and machine learning methods	27
Efficient fractionation and targeted valorization of industrial xylose residue by synergistic and mild alkaline deep eutectic solvent‑hydrogen peroxide pretreatment	27
Two-stage co-pyrolysis of Kraft lignin and palm oil mixture to biofuels: The role of lignin as a methylation agent for methyl ester formation	27
Experimental study on ignition characteristics of an integrated inclined combustor	27
The uneven distribution characteristics of minerals in Zhundong high iron coal and its influence on the slagging process	27
Boosting hydrogen production by reducible oxygen species over Ni/MTixOy catalysts for the steam reforming of liquefied oil from Saccharina japonica	27
Editorial Board	26
Influence of torrefaction with microwave and furnace heating on pyrolysis of poplar sawdust	26
Synthesis of molybdenum-cobalt nanoparticles decorated on date seed-derived activated carbon for the simultaneous electrochemical hydrogenation and oxidation of furfural into fuels	26
Flexible structural transformation and high oxygen-transfer capacity of mixed inverse spinel magnesium manganese oxides during methane chemical looping combustion	26
Synergistic removal of NO and Hg0 over Co-Mn/TiO2 catalyst: High efficiency and in-depth reaction mechanism	26
Solvent-mediated selective hydroconversion of benzyloxybenzene over a Ni/β40 catalyst	26
Mathematical models application in optimization of hydrothermal liquefaction of biomass	26
Direct flue gas hydrogenation to methane over hydroxyapatite-supported nickel catalyst	26
Catalytic transfer hydrogenation of furfural to furfuryl alcohol and 2-methylfuran over CuFe catalysts: Ex situ observation of simultaneous structural phase transformation	25
Customizing high-performance molten salt biochar from wood waste for CO2/N2 separation	25
Study the effect of zeolite pore size and acidity on the catalytic pyrolysis of Kraft lignin	25
Visualization research on ash deposition characteristics of Zhundong coal in a vertical liquid slagging cyclone furnace	25
Sodium doped SrTi1-xBxO3 (B Mn, Co) for formaldehyde catalytic oxidation: Flame spray pyrolysis fabrication and reaction mechanism elaboration	25
Noncatalytic hydropyrolysis of lignin in a high pressure micro-pyrolyzer	25
In situ encapsulation of peroxophosphotungstate in ZIF-8: A highly active, reusable and structurally stable catalyst for desulfurization	25
Coal pyrolysis under varied atmospheres and temperatures in a moving-bed pyrolyzer for blue-coke production	24
Decarboxylative - Dimerization of levulinic acid using spent Li-ion battery electrode material with lithium nickel cobalt manganese oxide as a catalyst	24
Numerical study on self-ignition temperature of biomass gasified gas for the application of MILD combustion	24
Uncovering the potential of MSC CT-350 for CO2/CH4 separation toward the optimization of a Pressure Swing Adsorption process for biogas upgrading	24
Experimental study on the reaction kinetics of char combustion in a pressurized O2/H2O atmosphere	24
Designing oxygen vacancy rich mesoporous CeO2 nanorods with co-doped Cd and Ni for synergistic oxidative‑hydrogenation desulfurization of transportation fuel oils	24
Bifunctional acid-activated montmorillonite catalyzed biodiesel production from non-food oil: Characterization, optimization, kinetic and thermodynamic studies	24
Dynamic CFD modeling and evaluation of ash deposition behaviors during Zhundong coal combustion	24
Synergetic metal-Nx and metal nanoparticles derived from Zn/Co-zeolitic imidazolate frameworks boosted conversion of microalgal lipids	24
Influences of ammonia co-firing on the NO generation characteristics of pulverized coal during different combustion stages	24
Molecular-scale elucidating of lignocellulose biomass char steam gasification for ultimately converting to syngas	24
Flexible off-grid renewable power-to-methanol system: Techno-economic optimization	24
Experimental evaluation of the influence of blends of aviation fuel with RME on the performance of an engine with a common-rail power system	24
Co-pyrolysis of coal-derived sludge and low-rank coal: Thermal behaviour and char yield prediction	24
Nitrogen incorporation in SAPO-34: How urea etching improves catalyst lifetime and selectivity	24
Enhanced performance of La1-xFeO3-δ oxygen carrier via A-site cation defect engineering for chemical looping dry reforming of methane	24
Investigation of applied smouldering in different conditions: The effect of oxygen mass flux	24
Intensifying petroleum fractionators through internal partial condensation in place of pump-around	24
Electric arc gasification of pyrolysis oil with the production of hydrogen-enriched synthesis gas and carbon nanomaterial	24
On the evolution of n-octane atomization characteristics using an air-assisted intermittent spray method	23