International Journal of Pharmaceutics

Article	Citations
Editorial Board	200
Levilactobacillus brevis surface layer protein B promotes liposome targeting to antigen-presenting cells in Peyer’s patches	136
Effects of particle size and release property of paclitaxel-loaded nanoparticles on their peritoneal retention and therapeutic efficacy against mouse malignant ascites	135
Editorial Board	132
Practical use of primary drying models in an industrial environment with limited availability of equipment sensors	112
In vivo methodologies to assist preclinical development of topical fixed-dose combinations for pain management	109
Corrigendum to article “Clotrimazole nanoemulsion for malaria chemotherapy. Part II: Stability assessment, in vivo pharmacodynamic evaluations and toxicological studies” [Int. J. Pharm. 431(1–2) (2012	107
Corrigendum to “Mechanistic modeling of twin screw wet granulation for pharmaceutical formulations: Calibration, sensitivity analysis, and model-driven workflow” [Int. J. Pharm. 659 (2024) 124246]	98
Evaluation of immune-modulating drugs for use in drug-eluting microsphere transarterial embolization	97
Corrigendum to “Investigation on hot melt extrusion and prediction on 3D printability of pharmaceutical grade polymers” [Int. J. Pharm. 604 (2021) 120755]	95
In vivo and in vitro transdermal availability of Ibuprofen using novel solubility enhancing fluid nanosized carrier systems	93
Corrigendum to “Microparticulated Polygonatum sibiricum polysaccharide shows potent vaccine adjuvant effect” [Int. J. Pharm. 652 (2024) 123802]	93
A quantification of gastric and duodenal fluid volumes in older adults using MRI	92
Novel microparticulate Zika vaccine induces a significant immune response in a preclinical murine model after intramuscular administration	90
From laminar to turbulent flow in a dry powder inhaler: The effect of simple design modifications	85
A framework to optimize spring-driven autoinjectors	80
(E, E)-farnesol and myristic acid-loaded lipid nanoparticles overcome colistin resistance in Acinetobacter baumannii	79
Wet granulation end point prediction using dimensionless numbers in a mixer torque rheometer: Relationship between capillary and Weber numbers and the optimal wet mass consistency	78
Evaluation of a polymeric topical formulation of Endoxifen in an estrogen receptor positive breast cancer murine model	77
Protective role of transforming growth factor-Β3 (TGF-Β3) in the formation of radiation-induced capsular contracture around a breast implant: In vivo experimental study	77
Tumor-specific targeting of polymer drug delivery systems with recombinant proteins bound via tris(nitrilotriacetic acid)	76
Dry powder inhaler formulation comparison: Study of the role of particle deposition pattern and dissolution	74
Hydrogel-forming microarray patches combined with powder-based reservoir for labetalol hydrochloride transdermal delivery	73
Predictive modeling for assessing the long-term thermal stability of a new fully-liquid quadrivalent meningococcal tetanus toxoid conjugated vaccine	73
Formulation, in-vitro characterization and clinical evaluation of curcumin in-situ gel for treatment of oral submucosal fibrosis (OSF)	72

Development of a predictive model for gravimetric powder feeding from an API-rich materials properties library	72
In situ gel-forming oil as rectally delivering platform of hydrophobic therapeutics for ulcerative colitis therapy	69
Editorial Board	68
Increased bioavailability of a P-gp substrate: Co-release of etoposide and zosuquidar from amorphous solid dispersions	68
Editorial Board	68
DNA-templated nanosheets for enhanced chemodynamic therapy and gene therapy to inhibit tumor recurrence and metastasis	67
Exploring the relationship between bulk Young’s Modulus of materials and milling efficiency during wet bead milling of pharmaceutical compounds	66
Wharton's jelly mesenchymal stem cell-derived small extracellular vesicles as natural nanoparticles to attenuate cartilage injury via microRNA regulation	64
pH-sensitive niosomes for ATRA delivery: A promising approach to inhibit Pin1 in high-grade serous ovarian cancer	63
Gypenoside A-loaded mPEG-PLGA nanoparticles ameliorate high-glucose-induced retinal microvasculopathy by inhibiting ferroptosis	62
Synergistic therapy with celastrol-curcumin multifunctional nanomedicine: Anti-hepatocellular carcinoma and reduced hepatotoxicity	62
Lyophilization enhances the stability of Panax notoginseng total saponins-loaded transfersomes without adverse effects on ex vivo/in vivo skin permeation	61
Heme oxygenase 1 inhibitor discovery and formulation into nanostructured lipid carriers as potent and selective treatment against triple negative metastatic breast cancer	61
Inflammation-targeted sialic acid-dexamethasone conjugates for reducing the side effects of glucocorticoids	61
Inhalable FN-binding liposomes or liposome-exosome hybrid bionic vesicles encapsulated microparticles for enhanced pulmonary fibrosis therapy	58
Machine learning in additive manufacturing & Microfluidics for smarter and safer drug delivery systems	58
Lyophilized liposomal formulation of a peptidomimetic-Dox conjugate for HER2 positive breast and lung cancer	55
Tablet diversion strategy based on in-line NIR tablet press feed frame measurements	55
A smart β-Cyclodextrin-Aza[5]Helicene system for enhanced gemcitabine delivery and tracking in cancer cells	55
Rapidly separable bubble microneedle-patch system present superior transdermal mRNA delivery efficiency	54
Biomimetic replenishment therapy of cortisol using semi-solid extrusion – 3D printed tablets for adrenal insufficiencies	54
Hyaluronic acid-functionalized DDAB/PLGA nanoparticles for improved oral delivery of magnolol in the treatment of ulcerative colitis	53
Mast cell activators as adjuvants for intranasal mucosal vaccines	53
Calreticulin P-domain-derived “Eat-me” peptides for enhancing liposomal uptake in dendritic cells	53
Characterization and bioavailability of a novel coenzyme Q10 nanoemulsion used as an infant formula supplement	52
3D printing: Innovative solutions for patients and pharmaceutical industry	52
Chondroitin/Lactoferrin-dual functionalized pterostilbene-solid lipid nanoparticles as targeted breast cancer therapy	52
An improved experimental model of osteosarcoma lung metastases to investigate innovative therapeutic interventions and sex as a biological variable	51
Aptamer-Drug Conjugates (ApDCs): Transformative approaches in targeted cancer therapy and precision oncology	51
Effect of positive charges on liposome stability, uptake efficacy and impact on cells	51
Glatiramer acetate enhances tumor retention and innate activation of immunostimulants	51
Disulfiram 3D printed film produced via hot-melt extrusion techniques as a potential anticervical cancer candidate	51
Overview of biomembrane-derived nanoparticles as emerging drug delivery systems for treating bone aging diseases	51
A compartment model for subcutaneous injection of monoclonal antibodies	51
Editorial Board	51
Exploiting inhalable microparticles incorporating hybrid polymer-lipid nanoparticles loaded with Iloprost manages lung hyper-inflammation	51
Probing fluconazole deposition inside mesoporous silica using solid-state NMR spectroscopy: Crystallization of a confined metastable form and phase transformations under storage conditions	50
Efficacy and safety of nanoparticles of glibenclamide and organomodified layered double hydroxides in diabetics rats	50
The application of Near-Infrared Spatially Resolved Spectroscopy in scope of achieving continuous real-time quality monitoring and control of tablets with challenging dimensions	50
Polymer-inducing chemical degradation of amorphous solid dispersions driven by drug-polymer interactions for physical stabilization	50
Simultaneous modeling prediction of three key quality attributes of tablets by powder physical properties	50
Ophthalmic wild olive (ACEBUCHE) oil nanoemulsions exert oculoprotective effects against oxidative stress induced by arterial hypertension	49
Oral delivery of ambrisentan-loaded lipid-core nanocapsules as a novel approach for the treatment of pulmonary arterial hypertension	49
Pharmacokinetic profile, tissue residue depletion and anthelmintic efficacy of supramolecular fenbendazole	49
F3 peptide functionalized liquid crystalline nanoparticles for delivering Salinomycin against breast cancer	49
Paliperidone palmitate as model of heat-sensitive drug for long-acting 3D printing application	49
Chitosan-aloe vera scaffolds with tuned extracellular vesicles and histatin-5 display osteogenic and anti-biofilm activities	48
Benzoic acid complexes with Eudragit E100®: New alternative antimicrobial preservatives	48
ROS-responsive nanocomposite hydrogel dressing accelerates diabetic wound healing through modulation of the inflammatory microenvironment	48
Systemic administration of a novel Beclin 1-derived peptide significantly upregulates autophagy in the spinal motor neurons of autophagy reporter mice	48

Development of iron oxide based-upconversion nanocomposites for cancer therapeutics treatment	47
A multivariate formulation and process development platform for direct compression	47
Paradigm of lyotropic liquid crystals in tissue regeneration	47
Synthesis of manganese-incorporated polycaplactone-poly (glyceryl methacrylate) theranostic smart hybrid polymersomes for efficient colon adenocarcinoma treatment	47
HAMA/GelMA-based hydrogel microneedle patch via DLP 3D bioprinting for high-efficiency ISF extraction	47
4D study of liquid binder penetration dynamics in pharmaceutical powders using synchrotron X-ray micro computed tomography	47
Targeted treatment of triple-negative-breast cancer through pH-triggered tumour associated macrophages using smart theranostic nanoformulations	47
Development of a nanocapsule-loaded hydrogel for drug delivery for intraperitoneal administration	47
A PEG-assisted membrane coating to prepare biomimetic mesoporous silicon for PET/CT imaging of triple-negative breast cancer	46
Development of purified glycogen derivatives as siRNA nanovectors	46
Ondansetron/Cyclodextrin inclusion complex nanofibrous webs for potential orally fast-disintegrating antiemetic drug delivery	46
Nose-to-brain delivery of DHA-loaded nanoemulsions: A promising approach against Alzheimer’s disease	46
Vesicular phospholipid gels: A new strategy to improve topical antimicrobial dermatotherapy	46
Negatively charged polymer-shielded supramolecular nano-micelles with stimuli-responsive property for anticancer drug delivery	46
Role of dispersion enhancer selection in the development of novel tratinterol hydrochloride dry powder inhalation formulations	46
Personalised paediatric chewable Ibuprofen tablets fabricated using 3D micro-extrusion printing technology	45
Fused deposition modeling 3D printing of solid oral dosage forms containing amorphous solid dispersions: How to elucidate drug dissolution mechanisms through surface spectral analysis techniques?	45
Highly water-soluble dapsone nanocrystals: Towards innovative preparations for an undermined drug	45
Super-swelling hydrogel-forming microneedle based transdermal drug delivery: Mathematical modelling, simulation and experimental validation	45
Comparative dissolution studies of 3D-printed inserts in a novel biopharmaceutical bladder model	45
Impact of blend properties and process variables on the blending performance	45
A new parameter for characterization of tablet friability based on a systematical study of five excipients	45
An overview of in vitro and in vivo techniques for characterization of intranasal protein and peptide formulations for brain targeting	45
Enhancement of in-vitro anti-oral cancer activities of silymarin using dispersion of nanostructured lipid carrier in mucoadhesive in-situ gel	44
Low molecular weight fucoidan modified nanoliposomes for the targeted delivery of the anti-inflammation natural product berberine	44
Lactoferrin decorated bilosomes for the oral delivery of quercetin in type 2 diabetes: In vitro and in vivo appraisal	44
Elastic cationic liposomes for vitamin C delivery: Development, characterization and skin absorption study	44
Development of new nanofibrous nerve conduits by PCL-Chitosan-Hyaluronic acid containing Piracetam-Vitamin B12 for sciatic nerve: A rat model	44
Sequential Flash NanoPrecipitation for the scalable formulation of stable core-shell nanoparticles with core loadings up to 90%	44
Switching from batch to continuous granulation: A case study of metoprolol succinate ER tablets	44
Enhanced dissolution rate of nimodipine through β-lactoglobulin based formulation	44
Effect of the combination of permeation enhancer and ion-pairs strategies on transdermal delivery of tofacitinib	44
Aptamer-modified chitosan-capped mesoporous silica nanoparticles for co-delivery of cytarabine and daunorubicin in leukemia	44
Particulate levodopa nose-to-brain delivery targets dopamine to the brain with no plasma exposure	44
Quality by design – Spray drying of ciprofloxacin-quercetin fixed-dose combination intended for inhalation	43
NaDES as a green technological approach for the solubility improvement of BCS class II APIs: An insight into the molecular interactions	43
Safflower oil body nanoparticles deliver hFGF10 to hair follicles and reduce microinflammation to accelerate hair regeneration in androgenetic alopecia	43
Curcumin-functionalized gold nanoparticles attenuate AAPH-induced acute cardiotoxicity via reduction of lipid peroxidation and modulation of antioxidant parameters in a chicken embryo model	43
Weibull β value for the discernment of drug release mechanism of PLGA particles	43
Near-infrared analysis of nanofibrillated cellulose aerogel manufacturing	43
Utilization of 3D bioprinting technology in creating human tissue and organoid models for preclinical drug research – State-of-the-art	42
Optimization of formulation and atomization of lipid nanoparticles for the inhalation of mRNA	42
Oxygen Sensitive Drug Release Using Hemoglobin Microbubbles: A New Approach to Targeting Hypoxia in Ultrasound-Mediated Drug Delivery	42
Design of red blood cell membrane-cloaked dihydroartemisinin nanoparticles with enhanced antimalarial efficacy	42
Spray freeze dried cannabidiol with dipalmitoylphosphatidylcholine (DPPC) for inhalation and solubility enhancement	42
Thermo-responsive hydrogels for cancer local therapy: Challenges and state-of-art	42
Tumor microenvironment stimuli-responsive lipid-drug conjugates for cancer treatment	41
Antibody-siRNA conjugates (ARCs) using multifunctional peptide as a tumor enzyme cleavable linker mediated effective intracellular delivery of siRNA	41
Editorial Board	41
Editorial Board	41
Cochleate drug delivery systems: An approach to their characterization	41
Surfactant-based drug delivery systems for cancer therapy: Advances, challenges, and future perspectives	41
Radiolabeling and cytotoxicity of monoclonal antibody Isatuximab functionalized silver nanoparticles on the growth of multiple myeloma	41
PET biodistribution study of subcutaneous and intravenous administration of adalimumab in an inflammatory bowel disease model	41
Chitosan-based buccal mucoadhesive patches to enhance the systemic bioavailability of tizanidine	41
A material-sparing simplified buoyancy method for determining the true density of solids	41
Editorial Board	41
Repurposing chlorpromazine for anti-leukaemic therapy by nanoparticle encapsulation	41
Impact of silicone oil tamponade on intravitreally injected vancomycin pharmacokinetics in cynomolgus monkey eyes	40
Functional characteristics of 3′-azido-3′-deoxythymidine transport at the blood-testis barrier	40
Influence of multiple compression phases during tableting of spray dried Saccharomyces cerevisiae on microbial survival and physical–mechanical tablet properties	40
Thermodynamic and kinetic analysis of human epidermal penetration of phenolic compounds: I. Stratum corneum solubility and partitioning	40
Clickable polyethyleneimine incorporated into triblock copolymeric micelles as an efficient platform in the delivery of siRNA to NSCLC cells	40
Enhancement of subunit vaccine delivery with zinc-carnosine coordination polymer through the addition of mannan	40
Coumarin-poly(2-oxazoline)s as synergetic and protein-undetected nanovectors for photodynamic therapy	39
Preparation, characterization, ex vivo transdermal properties and skin irritation evaluation of 1,8-cineole nanoemulsion gel	39
Development and optimization of an in vitro release assay for evaluation of liposomal irinotecan formulation	39
Multiplexed electrospray enables high throughput production of cGAMP microparticles to serve as an adjuvant for a broadly acting influenza vaccine	39
Biodegradable zwitterionic polymer-cloaked defective metal–organic frameworks for ferroptosis-inducing cancer therapy	39
Considerations in the developability of peptides for oral administration when formulated together with transient permeation enhancers	39
Scale-up of a low-temperature spray-drying process for a tuberculosis vaccine candidate using lab-scale equipment	38
Challenges with effective removal of surfactants from monoclonal antibody formulations	38
Prolonged joint cavity retention of tranexamic acid achieved by a solid-in-oil-in-gel system: A preliminary study	38
A novel convex acoustic lens-attached ultrasound drug delivery system and its testing in a murine melanoma subcutaneous model	38
Impact of high shear blending on distribution of magnesium stearate on lactose for dry powder inhaled formulations	38
Predicting powder feedability: A workflow for assessing the risk of flow stagnation and defining the operating space for different powder-feeder combinations	38
Poly(BETA-AMINO) ester based electrospun membranes with modulated degradation and release kinetics for potential wound dressing applications	38
Olfactory drug delivery with intranasal sprays after nasal midvault reconstruction	38
Stability, pharmacokinetics, and biodistribution in mice of the EPAC1 inhibitor (R)-CE3F4 entrapped in liposomes and lipid nanocapsules	38
Material-sparing degradation-kinetics model for thermolabile drug stability assessment during twin-screw melt granulation – Insights with gabapentin	38

Antidiabetic potential of Gymnemic acid mediated gold nanoparticles (Gym@AuNPs) on Streptozotocin-induced diabetic rats-An implication on in vivo approach	38
The self-fluorescence verification and intracellular imaging of nanocrystals imbedded with aggregation-induced emission luminescent materials	38
Sodium-borohydride exfoliated bismuthene loaded with Mitomycin C for chemo-photo-radiotherapy of triple negative breast cancer	37
Effect of surfactants on lactate dehydrogenase aqueous solutions: A comparative study of poloxamer 188, polysorbate 20 and 80	37
Nanoparticle-induced enhancement of cholinesterase activity in the presence of malathion: A potential nerve agent therapeutic	37
Evaluation of bioadhesive gels for local action in the esophagus	37
Regulation of nanoparticle exocytosis direction via receptors transfer: A novel strategy to enhance therapeutic efficacy of semaglutide	37
Development and evaluation of the effect of ethanol and surfactant in vesicular carriers on Lamivudine permeation through the skin	37
Cell culture and pharmacokinetic evaluation of a solid dosage formulation containing a water-insoluble orphan drug manufactured by FDM-3DP technology	37
Steady-state modeling of a new continuous API dryer: Reduced-order model and investigation of dryer performance	37
Acetazolamide encapsulation in elastin like recombinamers using a supercritical antisolvent (SAS) process for glaucoma treatment	37
Dendrimers as drug delivery systems for oncotherapy: Current status of promising applications	37
DIFUCOSIN: DIclofenac sodium salt loaded FUCOidan-SericIN nanoparticles for the management of chronic inflammatory diseases	37
Corrigendum to “Evaluation of binders in twin-screw wet granulation – Optimization of tabletability” [Int. J. Pharm. 659 (2024) 124290]	37
Impact of mucoadhesive agent inclusion on the intraocular pressure lowering profile of Δ9-tetrahydrocannabinol-valine-hemisuccinate loaded nanoemulsions in New Zealand white rabbits	37
Morphologic design of nanogold carriers for a carbonic anhydrase inhibitor: Effect on ocular retention and intraocular pressure	36
Ocular pharmacokinetics and toxicity of nanoparticular acetazolamide: In vivo distribution and safety of PHBV-ACZ nanoparticle	36
Exploiting hydrogen bonding to enhance lidocaine loading and stability in a poly ethylene-co-vinyl acetate carrier matrix	36
Optimising intracellular delivery of antibiotic loaded PLGA nanoparticles to macrophages	36
Liquid crystalline lipid nanoparticles improve the antibacterial activity of tobramycin and vancomycin against intracellular Pseudomonas aeruginosa and Staphylococcus aureus	36
Design, optimization and evaluation of dexamethasone-loaded microneedles for inflammatory disorders	36
HLD-NAC design and evaluation of a fully dilutable lecithin-linker SMEDDS for ibuprofen	36
Lyophilization cycle design for highly concentrated protein formulations supported by micro freeze-dryer and heat flux sensor	36
Design and development of polydioxanone scaffolds for skin tissue engineering manufactured via green process	36
Polymeric hydrogel forming microneedle-mediated transdermal delivery of sildenafil citrate from direct-compressed tablet reservoir for potential improvement of pulmonary hypertension therapy	36
Design and Development of Dasatinib Nanoemulsions for Ocular Delivery: In vitro Characterization, Biocompatibility, and Ex vivo Ocular Irritation Study	36
FAP-targeting biomimetic nanosystem to restore the activated cancer-associated fibroblasts to quiescent state for breast cancer radiotherapy	36
Nano-baicalein facilitates chemotherapy in breast cancer by targeting tumor microenvironment	36
The rough inhalable ciprofloxacin hydrochloride microparticles based on silk fibroin for non-cystic fibrosis bronchiectasis therapy with good biocompatibility	36
Mixing of dry powders for inhalation: A review	36
Effect of the NFL-TBS.40-63 peptide on canine glioblastoma cells	36
Emerging 3D printing technologies for solid oral dosage forms: Processes, materials and analytical tools for real-time assessment	36
Developing hyaluronic acid-proline-ferric ion cross-linked film for efficient wound healing application	35
A crosslinked dextran sulfate-chitosan nanoparticle for delivery of therapeutic heparin-binding proteins	35
Enhancing transdermal delivery of chrysomycin A for the treatment of cutaneous melanoma and MRSA infections using Skin-Penetrating Peptide-Functionalized deformable liposomes	35
Contact lenses that transform gold into nanoparticles for prophylaxis of light-related events and photothermal therapy	35
Bacterial nanocellulose as a simple and tailorable platform for controlled drug release	35
Synergistic antifungal activity against Candida albicans between voriconazole and cyclosporine a loaded in polymeric nanoparticles	35
Easy to use particle-mediated transport of various dissolved active agents into the hair follicles – A novel platform technology	34
Enhanced radiotherapy efficacy of breast cancer multi cellular tumor spheroids through in-situ fabricated chitosan-zinc oxide bio-nanocomposites as radio-sensitizing agents	34
Non-spherical drug particle deposition in human airway using computational fluid dynamics and discrete element method	34
Investigating the physicochemical properties of solid dispersions based on semicrystalline carriers: A case study with ketoprofen	34
A high-capacity combination of Pluronic L64-Cupping for intramuscular gene delivery	34
Development of a proliposomal pretomanid dry powder inhaler as a novel alternative approach for combating pulmonary tuberculosis	34
Dissolving microarray patches for transdermal delivery of risperidone for schizophrenia management	34
Incorporating Span 80 surfactant into lipid nanocapsules improves their biocompatibility and cellular uptake in B16F10 melanoma cells	34
Pharmacokinetics, biodistribution, and activity of Amphotericin B-loaded nanocochleates on the Leishmania donovani murine visceral leishmaniasis model	33
Design of liposomal nanocarriers with a potential for combined dexamethasone and bevacizumab delivery to the eye	33
Towards rational design of API-poly(D, L-lactide-co-glycolide) based micro- and nanoparticles: The role of API-polymer compatibility prediction	33
A dual-delivery platform for vaccination using antigen-loaded nanoparticles in dissolving microneedles	33
Fabrication and evaluation of customized implantable drug delivery system for orthopedic therapy based on 3D printing technologies	33
Explainable deep recurrent neural networks for the batch analysis of a pharmaceutical tableting process in the spirit of Pharma 4.0	33
Optimization of the different phases of the freeze-drying process of solid lipid nanoparticles using experimental designs	33
Nanostructured lipid carrier to overcome stratum corneum barrier for the delivery of agomelatine in rat brain; formula optimization, characterization and brain distribution study	33
Thermoresponsive solid lipid nanoparticles and its potential for CNS tumor therapy	33
Flexible modelling of the dissolution performance of directly compressed tablets	33
Application of a wavelength angle mapper for variable selection in iterative optimization technology predictions of drug content in pharmaceutical powder mixtures	33
Characterization of exparel bupivacaine multivesicular liposomes	33
Improvement of a pharmaceutical powder mixing process in a tote blender via DEM simulations	33
Carboxymethyl-starch:iodine complexes as virucidal agents: salivary amylase triggers on-site iodine release, preventing human coronavirus OC43 replication	33
3D printing for personalised medicines: implications for policy and practice	33
Rivaroxaban lyospheres prepared by a dimethyl sulfoxide-based spray-freeze-drying process	32
Impact of polysorbate 65 on tripalmitin crystal growth and release stability of hot melt coated multiparticulate systems	32
The impact of glidant addition on continuous blending of active pharmaceutical ingredients	32
Topical delivery systems containing clotrimazole for the management of candidiasis: Effect of different excipients and enhanced antifungal activity of nanovesicles	32
Carrier-free Chinese herbal small molecules self-assembly with 3D-porous crystal framework as a synergistic anti-AD agent	32
Development of 3D printed mini-waffle shapes containing hydrocortisone for children’s personalized medicine	32
Harnessing unique architecture and emerging strategies of solid lipid nanoparticles to combat colon cancer: A state-of-the-art review	32
Stability characterization for pharmaceutical liposome product development with focus on regulatory considerations: An update	32
Preparation, characterization, and ex vivo evaluation of isoxanthohumol nanosuspension	32
Thiolated cyclodextrins: A comparative study of their mucoadhesive properties	32
Inhalable bedaquiline-loaded cubosomes for the treatment of non-small cell lung cancer (NSCLC)	32
Liposomes-mediated enhanced antitumor effect of docetaxel with BRD4-PROTAC as synergist for breast cancer chemotherapy/immunotherapy	32
Droplet-based microfluidics for drug delivery applications	31
Structure–activity relationships of pH-responsive and ionizable lipids for gene delivery	31
Bone targeted miRNA delivery system for miR-34a with enhanced anti-tumor efficacy to bone-associated metastatic breast cancer	31
Brain-Derived Neurotrophic Factor-Loaded Low-Temperature-Sensitive liposomes as a drug delivery system for repairing podocyte damage	31
pH-temperature dual-sensitive nucleolipid-containing stealth liposomes anchored with PEGylated AuNPs for triggering delivery of doxorubicin	31
Gastroretentive fibrous dosage forms for prolonged delivery of sparingly-soluble tyrosine kinase inhibitors. Part 4: Experimental validation of the models of drug concentration in blood	31
Introducing a passively targeted formulation of diclofenac potassium for application in endodontics to minimize renal and gastrointestinal side effects	31
Quality by design for sumatriptan loaded nano-ethosomal mucoadhesive gel for the therapeutic management of nitroglycerin induced migraine	31
Process development of tangential flow filtration and sterile filtration for manufacturing of mRNA-lipid nanoparticles: A study on membrane performance and filtration modeling	31
A folate-targeted PEGylated cyclodextrin-based nanoformulation achieves co-delivery of docetaxel and siRNA for colorectal cancer	31
Rasagiline mesylate-based microneedle patches: A patient-friendly treatment regimen for Parkinson’s disease	31
Delivery of viscous drops and jets to eyeball replicas	31
Biodistribution and pharmacokinetics of [89Zr]-anti-VEGF mAbs using PET in glioblastoma rat models	31
Using AI/ML to predict blending performance and process sensitivity for Continuous Direct Compression (CDC)	31
Span 80/TPGS modified lipid-coated chitosan nanocomplexes of acyclovir as a topical delivery system for viral skin infections	31
Advancing neurological disorders therapies: Organic nanoparticles as a key to blood-brain barrier penetration	31
In-situ green synthesis of copper tannic acid framework in the presence of graphene quantum dots: Improved colloidal and antibacterial properties	31
Advancements in transdermal drug delivery: A comprehensive review of physical penetration enhancement techniques	31
Enhancing siRNA cancer therapy: Multifaceted strategies with lipid and polymer-based carrier systems	31
Cistanche deserticola polysaccharide- functionalized dendritic fibrous nano-silica −based adjuvant for H9N2 oral vaccine enhance systemic and mucosal immunity in chickens	31
Corrigendum to “Challenges in tracing material flow passing a loss-in-weight feeder in continuous manufacturing processes” [Int. J. Pharm. 612 (2022) 121304]	31
Production and stability of amorphous solid dispersions produced by a Freeze-drying method from DMSO	31