Synthetic Metals

Papers
(The median citation count of Synthetic Metals is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-07-01 to 2025-07-01.)
ArticleCitations
Editorial Board148
Corrigendum to “Fabrication of efficient and economical dye-sensitized solar cells using carbon-coated nanotextured silicon wafers counter electrodes” [Synth. Met. 301 (2024) 117537]71
Properties of free-standing graphene oxide/silver nanowires films and effects of chemical reduction and gamma irradiation65
Innovations in carbon nanotube polymer composites: Electrical, thermal, and mechanical advancements for aerospace and automotive applications63
Green TADF emitters based on adamantane-substituted acridine donor/diphenyl ketone acceptor in D-A and D-A-D systems61
Recent advances in electrochromic conjugated polymers prepared by direct (hetero) arylation polymerization56
Flexible high-performance organic thin film transistors and PMOS inverters: Trap controlled grain boundaries and contact resistance effect in different channel length devices55
Broadband microwave absorption with ultra low filler ratio through one step direct calcination of the pappi of Ceiba speciosa (A. St.-Hil.)53
Facile direct arylation polycondensation of random semiconducting terpolymers for single-junction non-fullerene organic solar cells51
Harnessing synergies: Gold-polyaniline based symmetric supercapacitor for low-frequency waveform generation51
Fabrication of novel electroactive nickel sulfide@graphene oxide nanocomposite integrated transduction platform for non-enzymatic electrochemical sensing of Hydrogen Peroxide in environmental and biol50
Solution spun electrically conductive nylon 6/poly(pyrrole) nanotubes-based composite fibers50
Polyaniline nanowire arrays oriented on the functionalized rGO/PEDOT/PP fabric substrate for high performance supercapacitors with mechanical flexibility47
Asymmetric NDI electron transporting SAM materials for application in photovoltaic devices45
Incorporation of carbon quantum dots with PEDOT:PSS for high-performance inverted organic solar cells44
Investigating charge mobility of alternating copolymers: The role of comonomers and electron-lattice interaction42
Fully printed organic photovoltaic employing F and N co-doped graphene oxide/polyaniline as hole extraction layer and copper nanowires as transparent conductive electrode40
Enhancing structural analysis and electromagnetic shielding in carbon foam composites with applications in concrete integrating XGBoost machine learning, carbon nanotubes, and montmorillonite40
The effect of conjugated groups for favourable molecular planarity and efficient suppression of charge recombination simultaneously of phenothiazine-based organic dyes for dye-sensitized solar cells39
The impact of pollutants on catalyst performance during hydrogen evolution reaction: A brief review38
Enhanced performance of HTM-free perovskite solar cells with free-standing carbon electrode via surface treatment and conductive support37
Fabrication and dielectric performance of RGO-PANI reinforced PVDF/BaTiO3 composite for energy harvesting37
Metal organic framework-derived hierarchical 0D/1D CoPC/CNTs architecture interlaminated in 2D MXene layers for superior absorption of electromagnetic waves36
A stable and highly-sensitive flexible gas sensor based on Ceria (CeO2) nano-cube decorated rGO nanosheets for selective detection of NO2 at room temperature36
The application of a novel D−A− π − A phenothiazine-based organic dye with N719 in efficient parallel tandem dye-sensitized solar cells36
Fused phthalimide-based A–DA′D–A small molecule: New protocol for n-type organic semiconductors35
Editorial Board35
Synthesis and electrochemical studies of 1,1’-binaphthyl-2,2’-diol for aqueous rechargeable lithium-ion battery applications34
Solution-processable small molecule based all-organic ultraviolet photodetector33
Multifunctional organic semiconductor for dopant-free perovskite solar cells33
Fluorinated hole transport material resistant to high annealing temperature applied in inverted perovskites solar cells33
Viscochromism in a dual emitter metallopolymer containing terbium ions32
Three dimensional and porous network architecture based on polyaniline hollow nanofibers with high specific capacitance and outstanding cyclic stability for supercapacitor electrode materials32
Designing of BiFe2O3@NiCoS@rGO nanocomposite electrode: A versatile platform for high-performance energy storage and electrolyte SIW/AN32
A comparison of poly (3,4-ethylenedioxythiophene) polymerized potentiostatically and galvanostatically32
Design and synthesis of pyridine-bridged benzothiazole-based D-A system for SRAM memory devices32
Synthesis methods of NiOx nanoparticles and its effect on hole conductivity and stability of n-i-p perovskite solar cells31
Comparative study of tetrasulfonated phthalocyanine modified screen-printed electrodes in paraquat31
Synthesize, characterization and application of a novel three-dimensional magnetic graphene oxide decorated with polyester dendrimers for detection of donepezil hydrochloride in pharmaceutical formula31
Ag nanoparticles-decorated CuBi2O4-rGO electrodes as an amperometric sensor for electrochemical determination of nitrite31
Unveiling the ligand effects on Pt(Ⅱ) carbene complexes for rapid, efficient and narrow-spectra blue phosphorescence30
Investigation of the imidazole-derived moiety/spiro[fluorene-9,9′-xanthene] hybrid compounds for blue luminescent materials30
Two-dimensional copper vanadate intercalated vanadium carbide MXene nanoplates as a high-performance cathode for aqueous Zn-ion batteries30
Tetranitro-substituted cobalt phthalocyanine immobilized on reduced graphene oxide as supercapacitor electrode material with enhanced capacitance29
Editorial Board28
Editorial Board28
Photosono catalytic behaviour of phthalocyanine when supported on electrospun nanofibers: The effect of radical initiators28
Novel A-π-A-D type perylene diimide acceptor for high-performance fullerene-free organic solar cells27
Editorial Board27
Editorial Board27
Self-assembled polyaniline nanostructures in situ deposited on silica optical fibers for ammonia gas sensing26
EPR monitoring of aniline polymerization: Kinetics and reaction mechanism26
Integrating theory and practice in the design of new trisazotriaryl compounds26
Experimental investigation on the tribological and rheological properties of graphene and FMWCNT based nanolubricants with CTAB surfactants26
Formation mechanism of α-phase CsPbI2Br induced by excessive CsBr without an annealing treatment26
Thickness optimization of SnO2 electron transporting layer in perovskite solar cells assembled under ambient atmosphere26
Photonic device application of a self-driven MXene based nanocomposite26
Effect of low-dose doping of small-molecules on the surface potential and carrier balance of TADF OLEDs26
Benzotriazole-based copolymers with an interlocked conformation for mitigating the correlation of thermoelectric parameters25
Preparation and infrared shielding of polyaniline@MWCNTs flexible electrochromic device based on cotton fabric25
Synthesis, electropolymerization, and optoelectronic properties of carbazole containing imidazolium based ionic liquid25
Retraction notice to “Achieving enhanced EMI shielding with novel non-woven fabric using nylon fiber coated with polyaniline via in situ polymerization” [Synth. Met. 293 (2023) 117250]25
Eco-friendly enhanced microwave synthesis of polyaniline/chitosan-AgNP composites, their physical characterisation and antibacterial properties25
Designing efficient A-D-A1-D-A-type non-fullerene acceptors with enhanced fill factor via noncovalently conformational locking25
Jute Sticks Derived and Commercially Available Activated Carbons for Symmetric Supercapacitors with Bio‐electrolyte: A Comparative Study24
Recent advances in electromagnetic interference (EMI) shielding textiles: A comprehensive review24
Synthesis of NiCo2O4 nanostructures with different morphologies for supercapacitor24
Nickel-manganese double hydroxide mixed with reduced graphene oxide electrocatalyst for efficient ethylene glycol electrooxidation and hydrogen evolution reaction24
Binder-free MgCo2O4@Ni3S2 core-shell-like composites as advanced battery materials for asymmetric supercapacitors24
Polythiophene blends and composites as potential energy storage materials24
Improved thermoelectric performance in polypyrrole/Cu2SnS3 composites24
Electrochemical formation of N–substituted polypyrrole nanowires, microwires and open microtubes and their decoration with copper structures23
Constructing hole transporting highway for high-efficiency perovskite solar cells23
Ion conduction property and electrochemical characteristics of Ag-ion gel polymer electrolyte22
Bridging biochemistry and microengineering: glucose oxidation in microfluidic biofuel cells with carbon-MEMS and conductive polymers electrodes22
Small molecules based on strongly electron-deficient aza-isatinylidene malononitrile for solution-processed n-type field-effect transistors22
Impact of device structure on field dependence of carrier mobility22
A molecularly imprinted electrochemical sensor based on Au nanoparticles-poly(o-phenylenediamine) for diethylstilbestrol detection22
Optimizing molecular conformation and photovoltaic property of simple asymmetrical SMAs by tuning electron-donating central subunit22
Sensor properties for Fe3+ and synthesis of new a bis –(3-(benzhydryloxy) propanoate) phthalocyaninato silicon (IV)22
Porous polyaniline/flower-like hybrid phase MoS2/phosphorus-doped graphene ternary nanocomposite for efficient room temperature ammonia sensors22
Conducting polypyrrole and polypyrrole/manganese dioxide composites prepared with a solid sacrificial oxidant of pyrrole21
Dispersion process of highly crystalline single-walled carbon nanotubes focusing on their chemical stability21
New blue emitters based on anthracene through charge transfer control21
Influence of PLA/HDPE Ratio and CNT content on the morphology, electrical, and EMI shielding of CNT-filled PLA/HDPE blends21
Electrochemical, in silico and time-resolved EPR behaviour of semiconductive π-conjugated poly(p-phenyleneethynylenevinylene)s (PPEV)21
Preparation and electrochemical properties of benzothiadiazole-benzotriazole donor-acceptor conductive polymer lithium-ion anode materials20
Chemiresistive and chem-FET Sensor: π-d conjugated metal-organic framework for ultra-sensitive and selective carbon monoxide detection20
Electrochemical synthesis of some thiosemicarbazide derivatives doped polypyrrole electrodes and supercapacitor applications20
Highly flexible, PEDOT:PSS-polyvinylpyrrolidone coated carbon nanofiber-polydimethylsiloxane composite for electromagnetic interference shielding20
Corrigendum to “The fabrication of FeMnO/RGO as anticorrosive microwave absorbent toward marine environment” [Synth. Met. 282 (2021) 116933]20
NiFe2O4/coal-based carbon composites with magnetic properties and microwave absorption capacity prepared through microwave radiation and hydrothermal reaction20
Self-repairing tin-based perovskite solar cells using 2,4-dichlorophenylhydrazine hydrochloride as dopant20
Design of fullerene-based interface passivation coatings for n-i-p perovskite solar cells: Addend size matters!20
Fabrication of binary to quaternary PVDF based flexible composite films and ultrathin sandwich structured quaternary PVDF/CB/g-C3N4/BaFe11.5Al0.5O19 composite films for efficient EMI shielding perform20
Fabrication of novel M-Type cobalt doped barium hexaferrite nanoplatelets /graphitic carbon nitride composite for efficient supercapacitor applications20
Asymmetric main-chain twisted small molecules for efficient polymer solar cells20
Retraction notice to achieving enhanced electromagnetic shielding by novel flexible rubber based nanocomposite with the incorporation of nickel spinal ferrites and polyaniline [Synth. Met. 295 (2023) 20
Graphene-based materials and their applications in electrolyte-gated transistors for sensing20
The electrochemical performance of gallium nitride composited with g-C3N4 in bulk and oxidized forms for supercapacitors20
Optimization of TiO2 immobilized – Reduce graphene oxide photocatalyst toward organic compounds in aqueous medium20
Synthesis and supercapacitive behaviour of SnO2/r-GO nanocomposite19
In situ Fe3O4 loaded sonochemically functionalized multi-walled CNTs and RGO based composites as electrode materials for supercapacitors19
Solid-state synthesis of conductive polymer PEDOT whiskers19
SILAR synthesized dysprosium selenide (Dy2Se3) thin films for hybrid electrochemical capacitors19
A-D-A small molecules featuring multi-fused rings and fluorinated benzothiadiazole for solution-processed organic field-effect transistors19
Study of the doping of PEDOT:PSS films and the reversibility in organic electrochemical transistors19
Correlating the structural evolution and charge transport in lightly doped semiconducting polymers of controlled regioregularity19
Electrode material for high performance symmetric supercapacitors based on superparamagnetic Fe3O4 nanoparticles modified with cetyltrimetylammonium bromide19
Amorphous nickel phosphate as a high performance electrode material for supercapacitor19
Metal-free phenothiazine dyes with alkoxy chains modified at different position for dye-sensitized solar cells18
Synthesis of titanium dioxide/reduced graphene oxide nanocomposite material via the incorporated hydrothermal co-precipitation method for fabricating photoanode in dye-sensitized solar cell18
In-situ coating of leather with conducting polyaniline in colloidal dispersion mode18
Comparison of cobalt phthalocyanine (CoPc) and reduced graphene oxide functionalized CoPc hybrid as sensing element for heavy metal ions in water18
Synthesis of nickel-containing metal-polymer nanocomposites and their use as a humidity sensor18
Facile green synthesis of Ag/carbon nanotubes composite for efficient water splitting applications18
PPy-NTs/C/TiO2/poly(ether sulfone) porous composite membrane: Efficient ultrafiltration of Evans blue dye from industrial wastewater18
Remarkable electrocatalytic activity of Pd nanoparticles dispersed on polyaniline-polydiphenylamine copolymer nanocomposite for methanol and ethanol oxidation reaction18
Electrochemical deposition of leaf stalk-shaped polyaniline doped with sodium dodecyl sulfate on aluminum and its use as a novel type of current collector in lithium ion batteries17
Facile hydrothermal synthesis and microwave absorption of halloysite/polypyrrole/Fe3O417
A highly-efficient and durable Pt-based electrocatalyst decorated by Co2C-Mo2C@CS composite for methanol oxidation reaction17
Engineering CoMn2O₄ nanofibers: Enhancing one-dimensional electrode materials for high-performance supercapacitors17
Impact of reduced graphene oxide on the sensing performance of Poly (3, 4–ethylenedioxythiophene) towards highly sensitive and selective CO sensor: A comprehensive study17
Graphene dispersion, functionalization techniques and applications: A review17
A review on effect of conducting polymers on carbon-based electrode materials for electrochemical supercapacitors17
Recent prospects and trends on zeolitic imidazolate frameworks for microwave absorption and EMI shielding applications17
Solvent engineering for two-dimensional perovskite of guanidium lead iodide17
Electrochemical, spectrochemical and catalytical properties of cobalt(II) phthalocyanine regioisomers studies17
Highly conductive and dimensionally stable anion exchange membranes enabled by rigid poly(arylene alkylene) backbones17
Editorial – Advances in blue organic electroluminescence17
Fluorinated polyaniline-based sensors with enhanced NH3 sensitivity16
Hybrid nonfullerene acceptors based on thieno[2′,3′:4,5]thieno[3,2-b]indole for efficient organic solar cells16
Editorial Board16
Editorial Board16
Editorial Board16
Enhanced performance of conjugated polymer-based ternary memory devices by embedding Pt nanoparticles16
Effects of solution-shearing process parameters on charge carrier mobility in green solvent-processed organic field-effect transistors16
Synthesis of MoS2-QDs@Fe3O4 nanocomposites decorated on reduced-graphene-oxide: Application in sensitive electrocatalytic determination of hydrazine15
Rapid synthesis of SrTiO3 nanocubes and replacement of the high-cost platinum electrode with SrTiO3@PANI nanocomposite in dye-sensitized solar cells15
Dynamics of charge carriers and photoresponse of TPD/n-Si hybrid structure for visible-blind UV self-biased photodetection applications15
Enhanced performance in solution-processed blue emission layer of organic light-emitting diodes with an alcohol soluble amphiphilic polymer as the hole modify layer15
Nanoparticles of poly(3-hexylthiophene): Toward a solvent-independent performance of electrochromic films15
Editorial: Conducting polymers and their composites for electrochemical energy conversion and storage15
Photocatalytic dye degradation by graphene oxide doped transition metal catalysts15
Ultralight melamine foam derived metal nanoparticles encapsulated CNTs/porous carbon composite for electromagnetic absorption15
Threshold voltage tuning in gelatin biopolymer-gated high-performance organic field-effect transistors15
Impact of photoinduced energy transfer and LSPR of Au nanoparticles prepared by pulsed laser ablation technique on nonlinear optical response of zinc tetraphenyl porphyrin15
Employing aldol condensation to prepare benzodifurandione based small molecules for application in thin-film transistors15
Nitrated benzothiadiazole-based D-A electrochromic polymers with tunable spectral properties15
Multi-functionality in de-doped poly 3-methylthiophene memristor device15
Facile macro fabrication of ultra-fine, ultra-long silver nanowire and growth mechanism15
Antimicrobial photocatalytic PANI based-composites for biomedical applications15
Corrigendum to “Interfacial fluorinated polymer layer enabling highly stable, fast response, high-performance self-powered PEA2PbBr4 ultraviolet photodetector” [Synth. Met. 293 (2023) 117261]15
Tailoring cathode interfaces for high-performance perovskite solar cells using perylene diimide derivatives with ionic diversity15
The use of low-frequency current fluctuations in measuring the mobility of holes in the MEH-PPV polymer14
Preparation of Co, Fe bimetallic materials supported on carbon nanotubes material and its application to rutin14
Tailoring the electrochemical properties of Ag-vanadium pentoxide porous network integrated with graphitic carbon nitride14
Design and structural characteristics of conducting polymer-metal organic framework composites for energy storage devices14
Bifunctional Ag@Ni-MOF for high performance supercapacitor and glucose sensor14
Microwave absorption and magnetic properties of thin-film Fe3O4 @polypyrrole nanocomposites: The synthesis method effect14
Facile synthesis of MWCNT-WO3 composites with enhanced photocatalytic degradation of methylene blue dye14
Electrochemical aptasensor based on RGO/PPy/Au*NPs for diagnostic biosensing of SARS-CoV-2 in clinical samples: Experimental and molecular dynamics simulations approaches14
Buried interface modification toward efficient perovskite solar cell based on PVK hole transport layer14
Fabrication of MoS2/rGO/AgNWs on PET substrate for flexible electrochromic devices14
Enhancing electrochemical energy storage performance of graphene oxide with 1,5-naphthalene diamine in supercapacitors application14
Electrode sticker for electrode lamination process enables highly durable inverted organic solar cells14
Poly 3-methylthiophene based memristor device for neuromorphic computing14
New conjugated copolymer MEH-PPV-P3HT with donor-acceptor system for organic optoelectronics applications: Experimental and theoretical study14
Cu-Nx active sites derived from copper phthalocyanine in porous carbon promoting oxygen reduction reaction14
An investigation into effects of heteroatom-tailored donor engineering on thermoelectric performance of cyclopentadithiophene-based copolymers14
Optimizing transparent electrodes: Interplay of high purity SWCNTs network and a polymer14
Detecting low-concentration ammonia with a surface acoustic wave sensor using a silver nanoparticles–graphene–polypyrrole hybrid nanocomposite film14
Retraction notice to “EMI shielding study of PVC-PT-Ag/ZnS nanocomposites in microwave region” [Synth. Met., 307(2024) 117687]14
3D printing inks of rGO/Fe3O4@Polyacrylonitrile as organic semiconductors13
Using commercially available cost-effective Zn(II) phthalocyanine as hole-transporting material for inverted type perovskite solar cells and investigation of dopant effect13
Effect of MWCNTs surface functionalization group nature on the thermoelectric power factor of PPy/MWCNTs nanocomposites13
Enhancing the efficiency of near-infrared iridium (III) complexes-based OLEDs by auxiliary ligand functionalization13
Enhanced performance of poly(3-hexylthiophene)-based electrochromic devices by adding a mesoporous TiO2 layer13
Electromagnetic wave absorption, EMI shielding effectiveness and electrical properties of ethylene – vinyl Acetate (EVA)/ Polyaniline (PAni) blends prepared by in situ polymerization13
Functionalization of dielectric BaTiO3 and semiconducting ZnO nanoparticles on rGO layers and their polymer composites: Applications in EMI shielding13
Benchmarking organic thin film transistor inverter design styles13
Enhancing the performance of CsPbIBr2 solar cells through zinc halides doping13
MOF-derived MoS2@Co3S4 nanoparticles modified with Ag as efficient sensor for glucose determination13
Synthesis, characterization, TD-DFT method, and optical properties of novel nanofiber conjugated polymer13
Electrochemical synthesis of catalytically active linear and cross-linked polyporphyrins13
High-active nanoplates of nitrogen-doped carbon@Mo2C as efficient catalysts in water splitting13
Editorial Board13
Study on the electrochemical behavior of NMC/Fe/Co materials prepared by soft membrane method13
Conducting polymer PEDOTs for biomedical application13
Surface energy modification of graphene oxide film by silanization co-functionalized with fluorine to maximize the moisture barrier property13
Small molecule semiconductors based on hemi-isoindigo and diketopyrrolopyrrole for solution-processed organic field-effect transistors13
Conjugated push-pull type oligomer as a new electron transport material for improved stability p-i-n perovskite solar cells13
Heterogeneous Co@N-doped carbon/MoxC@N-doped carbon nanoflowers for efficient electromagnetic wave absorption at microwave frequencies12
Preparation of magnetic Fe3O4@PDA/CuS core-shell nanocomposite as a green photocatalyst12
Ultrasonic-assisted synthesis of nickel metal-organic framework for efficient urea removal and water splitting applications12
Two birds with one stone: High electromagnetic interference shielding effectiveness and high thermal conductivity of ternary polyvinyl alcohol/graphene/ carbonyl iron nanocomposite films12
(Bi2Te3)1−x(PANI)x compositions- synthesis, structural, spectroscopic characterization with enhanced thermoelectric performance12
MOF-derived MnO/C composites as high-performance lithium-ion battery anodes12
PEDOT:PSS/AgNWs nanofibers obtained by electrospun and the post-treatment via DMSO vapor exposure12
A polyaniline/polyvinyl acetate composite film electrode for highly sensitive electrochemical sensing of pH12
Facile synthesis of polyaniline catalyzed by carbon fiber for supercapacitor applications12
Progress of conductive polypyrrole nanocomposites12
Lightweight porous carbon/rGO/Ni chain composite with excellent microwave absorption performance and multi-functional properties12
Easily synthesized pyrene-based nonfullerene acceptors for efficient organic solar cells12
Controlling the electrocatalytic activities of conducting polymer thin films toward suitability as cost-effective counter electrodes of dye-sensitized solar cells12
A comprehensive overview of carbazole-EDOT based electrochromic copolymers: A new candidate for carbazole-EDOT based electrochromic copolymer12
Enhancement of optical and photocatalytic properties of polyethylene oxide/polyvinylpyrrolidone blend reinforced with Ti3C2 MXene12
Fabrication of stannous sulfide nanoparticles for photodegradation of thiazine derivative and evaluation of its antibacterial activity12
Conducting polymers based composite materials towards anticorrosion applications12
Effects of bromination on anthryl-capped DPP-based semiconductor materials: Improved electrical characteristics of organic field-effect transistors11
Nickel phosphide nanoparticles decorated on polypyrrole nanowires as battery-type electrodes for hybrid supercapacitors11
Structure-property relationship of carbonized needlepunched nonwovens for electromagnetic interference shielding and ohmic heating applications11
Ammonia gas sensors using 1,4,5,8,9,11-hexaazatriphenylene hexacarbonitrile semiconductor films11
Material properties and optoelectronic applications of lead halide perovskite thin films11
Wet chemically synthesized metal oxides nanoparticles, characterization and application in electrochemical energy storage: An updated review11
A low bandgap conjugated polymer bearing a phenazine moiety for application in organic solar cells11
An ester functionalized wide bandgap polythiophene for organic field-effect transistors11
Study of direct current charge transport mechanism in a series of iridium metal complexes based on varying ancillary and cyclometalated ligands11
Editorial Board11
Progress in etching-driven MXene synthesis and utilization in conductive inks for printed electronics applications: A comprehensive review11
High performance encapsulation of transparent conductive polymers by spatial atomic layer deposition11
Towards an efficient p-n heterojunction in ternary composite material based polypyrrole, metal oxide and surface functionalized graphene for thermoelectric properties enhancement11
TTF-TCNQ derived N,S-codoped carbon with multiple macropores for excellent electromagnetic wave adsorption11
Synthesis of 3,4-dimethoxythiophene spacer-based non-fullerene acceptors for efficient organic solar cells11
Multilayer RGOx&PESy films for efficient electromagnetic shielding performance in a wide temperature range11
Ultraviolet light tunable single walled carbon nanotubes/n-Si junction diode11
Synthesis of cross-linked conducting copolymers containing twisted spirobifluorene units via direct arylation random copolymerization for electrochromic applications11
Enhanced microwave absorption properties of Ni decorated flaky graphite powders with frequency selective surfaces incorporation11
Recent development of electrochemically exfoliated graphene and its hybrid conductive inks for printed electronics applications11
The effect of additives on the morphology of organic solar cells: A brief review11
Electrochemical determination of heavy metals by a graphene quantum dots/porphyrin-based supramolecular system11
Preferential vertically oriented nanopillar perovskite induced by poly(9-vinylcarbazole) field-effect transistor11
Ultrasound-assisted synthesis of Polypyrrole/TiO2 nanocomposite for Cu(II) ions removal from aqueous solution10
Tuning structural and optical properties of GO@Mn-doped Co3O4 hybrid nanocomposite by a facile synthesis10
Gold-decorated carbon material for enhanced catalytic performance of cyclization/oxidation of 2-aminophenol, 2-aminothiophenol, and 2-aminoaniline with aromatic aldehydes10
RETRACTED: EMI shielding study of PVC-PT-Ag/ZnS nanocomposites in microwave region10
Sensitivity enhancement in rGO/Mn3O4 hybrid nanocomposites: A modified glassy carbon electrode for the simultaneous detection of dopamine and uric acid10
Synthesis and characterization of novel P3HT-CuO composites for their application in electrochromic devices10
Nanostructured electrochemical platform for sensitive detection of melatonin in human serum and tablets10
Long-lasting antimicrobial activity achieved through the synergy of graphene oxide and cuprous oxide coating on PET fabrics10
Organic soluble linear metallo-supramolecular polymer based on iron(II) and terpyridyl ligand with high electrochromic performance10
Additive manufacturing of carbon nanotube/polylactic acid films with efficient electromagnetic interference shielding and electrical heating performance via fused deposition modeling10
Semi-planar-semi-twisted selenophen-containing narrow bandgap small molecules for efficient polymer solar cells10
Radiation induced effect on structural and dielectric properties of polyaniline incorporation into polyvinylidene fluoride/barium titanate ternary composites10
Oxidative calcination of brewery bagasse and in-situ preparation of activated carbon-PEDOT composite for hybrid supercapacitor application10
A novel synthesis strategy for hybrid quaternary rGO/MnO2/NiO/CuO nanocomposite as electrode for enduring symmetric supercapacitor fabrication10
Editorial Board10
Segregated structure of poly (vinylidene fluoride-co-hexafluoropropylene) composites loaded with polyaniline@carbon nanotube hybrids with enhanced microwave absorbing properties10
PSS-free PEDOT and PEDOT/graphene transparent films: Synthesis, characterization and electrochromism10
Carbon felt-polypyrrole-silver chloride composite as a rechargeable positive electrode for the seawater magnesium cell10
0.082592010498047