Acta Mechanica Sinica

Article	Citations
Three-phase 2D model of long-rod penetrating semi-infinite metal targets considering variation in nose shape	1144
Towards SPH simulations of cavitating flows with an EoSB cavitation model	103
Atomic lattice-mimic design and optimization of the auxetic metamaterial inspired by the Ti crystal	71
Extracellular fluid viscosity: a new physical cue in cell biology	67
Investigation on damage mechanism of compressor blades in turboshaft engine induced by ice impacts at various locations	47
Electrohydrodynamic conduction pumping of viscoelastic dielectric liquids on the microscale	39
Dynamic characteristics of aircraft landing gear retraction mechanism under the coupling effects of extreme conditions	37
Reconstruction of the internal volume fraction for particle-liquid system from imaging indicators by refractive index matching	35
Three-dimensional vibration of L-shaped pipes conveying fluid	35
Investigation of the dynamic mechanical properties of additive manufactured Ti-6Al-4V alloys: the effect of impact orientation and heat treatment	35
Dynamics of an elliptical cylinder in confined Poiseuille flow under Navier slip boundary conditions	34
Lagrangian analysis on structure evolution and mass transport of circular and noncircular turbulent synthetic jets	34
Flow pattern change and drag coefficient enhancement for non-flattened pappus models due to reversed wind direction	32
Viscoelastic microenvironment as key regulators of astrocyte behavior in brain injury and scar formation	32
Design of two-dimensional extremal material based on truss lattices	30
Design of distributed dynamic absorbers for vibration suppression of panel structures	29
Topological materials for elastic wave in continuum	28
Higher-order topological states and magnetic field control in elastic metamaterials	26
The role of energetic flow structures on the aeolian transport of sediment and plastic debris	26
Influence of intramedullary pressure on fluid flow in Haversian canals and lacuno-canalicular network	25
Pressure field measurements on large-scale propeller blades using pressure-sensitive paint	25
Stress gradient versus strain gradient in polycrystalline high entropy alloy revealed by crystal plasticity finite element simulation	25
Periodic partial slip contact of thermoelectric materials under flat punches or cylindrical punches	25
Unraveling the formation and stabilization of vesicle penetration pore by molecular dynamics simulations	24
Insights into microstructural variations in GH4169 thin-walled parts by laser powder bed fusion: a coupling finite-element/cellular-automaton study	24

Reduced-order modeling of train-curved-slab-track dynamics with the effects of fastening failures	24
Continuous fiber paths optimization for composite structures with stress and manufacturing constraints using a parametric level set method	23
Hamilton–Pontryagin spectral-collocation methods for the orbit propagation	23
Micromechanics of composites with interface effects	22
New insights into cloud cavitation noise spectrum	22
Interaction of a planar shock wave with two heavy/light interfaces	22
Efficient uncertainty computation method for solving mechanical dynamic systems with a large-scale of interval parameters	22
Vibration localization and reduction in plates via lightweight soft acoustic black hole and vibration absorbers	21
A thermo-mechanically coupled constitutive model for temperature- and rate-dependent cyclic functional degradation of NiTi shape memory alloys	21
An integrative SPH method for heat transfer problems involving fluid-structure interaction	21
An efficient deep learning-based topology optimization method for continuous fiber composite structure	21
A normalized evaluation method on the interface parameters of rubber/cord pull-out tests for different sized samples	21
kεNet: discovering the turbulence model and applying for low Reynolds number turbulent channel flow	21
Introducing and analyzing a periodic pipe-in-pipe model for broadband ultra-low-frequency vibration reduction in fluid-conveying pipes	21
Multilayer perceptron neural network activated by adaptive Gaussian radial basis function and its application to predict lid-driven cavity flow	21
Arch-supported structures with different geometries in wind flow	20
Modeling and analysis of the friction in a non-linear sliding-mode triboelectric energy harvester	20
Deconvolutional artificial-neural-network framework for subfilter-scale models of compressible turbulence	20
Assessment of a new hybrid-SSOR implicit temporal scheme for turbulent flows across a wide range of Mach numbers	20
Impact of combined fluid-solid obstacles on flame acceleration and deflagration-to-detonation transition in a non-uniform concentration field	19
Study of oxygen transport and thrombosis risk with membrane oxygenators	19
Effect of the Coulomb and dielectric forces on the onset of Rayleigh-Bénard convection	18
Wake instability of a fixed spherical droplet with a high drop-to-fluid viscosity ratio	18
Passive vibration reduction performance of a triple-magnet magnetic suspension dynamic vibration absorber under sinusoidal excitation	18
Numerical method for solving dynamical equations of multibody systems with nonholonomic constraints based on state-space method	18
Geophysical fluid dynamics in the hypergravity field	18
Static bending and wave propagation analyses of a flexoelectric semiconductor nanobeam incorporating antisymmetric thickness-stretch	18
Modes of vortex shedding from a rotary oscillating plate	17
Enhancement effects of extracellular fluid viscosity and matrix stiffness on cancer cell mechanosensing	17
Electrohydrodynamic instabilities of viscous jets under alternating electric fields	17
Dynamic self-assembly of staggered oblate particle train in a square duct	17
Time-varying stiffness analysis of double-row tapered roller bearing based on the mapping structure of bearing stiffness matrix	16
A review on the deformation tracking methods in vision-based tactile sensing technology	16
Secondary vortical structures statistics of near-wake region in cylinder/wall interaction	16
Phase field simulation of solidification under supergravity	16
Assessment of bone strength and fracture behavior of degenerative vertebrae through quantifying morphology and density distribution	16
Inverse design of smart mechanical metamaterials based on liquid crystal elastomers	16
A newly developed interatomic potential of Nb−Al−Ti ternary systems for high-temperature applications	15
Mechanical contribution of the pia-arachnoid complex to brain tissue revealed by large deformation indentation	15
Modeling of the near-field radiation of acoustically actuated magnetoelectric antennas	15
Path planning and optimal control of a 4WS vehicle using calculus of variations	15
Rheological behaviors of spherical granular materials based on DEM simulations	15
Lightweight topology optimization of graded lattice structures with displacement constraints based on an independent continuous mapping method	15
One neural network approach for the surrogate turbulence model in transonic flows	15
Analyzing the contribution of helmet components to underwash effect under blast load	15
Molecular dynamics study on micro jet in single crystal aluminum	14
Two-step data-driven identification of probability densities for random vibrating systems with implicit Hamiltonian functions	14
Numerical analysis of dynamic stability of falling maple samaras	14
Voltage-induced graphene blister — a theoretical analysis	14
Tensile behaviors of filaments with misfit of chirality	14

Topological edge state analysis of hexagonal phononic crystals	13
Nonlocal isogeometric analysis for bidirectional functionally graded porous curved microbeams with arbitrary boundary conditions	13
Patient-specific modeling of left ventricle mechanics	13
A novel videogrammetry-based full-field dynamic deformation monitoring method for variable-sweep wings	13
Wake of a bio-inspired flapping wing with morphing wingspan	13
New meteoroid entry method with a deformable non-spherical N-body model	13
Dynamic mechanical behavior and nonlinear hyper-viscoelastic constitutive model of SiO2 particle-reinforced silicone rubber composite: experimental and numerical investigation	13
Positive and negative wall-pressure fluctuations beneath a supersonic turbulent boundary layer	13
Elucidating viscoelastic effects on focused ultrasound thermal therapy with acoustic-solid-thermal coupling analysis	12
Nonlinear dynamic stability analysis of imperfect architected cellular sandwich plate under impact loading	12
Structural global reliability assessment considering nonlinear correlation effects by enhanced high-order moment method	12
Some fundamental issues in buoyancy-driven flows with implications for geophysical and astrophysical systems	12
An active tunable piezoelectric metamaterial beam for broadband vibration suppression by optimization	12
On the configuration evolution of soft filaments under combined tension and torsion	12
Localization and macroscopic instability in nanoporous metals	12
A quasi-zero stiffness energy harvesting isolator with triple negative stiffness	12
Investigation of a nonlinear energy sink based on magnetic inerter	12
Evaluation of machine learning algorithms for predictive Reynolds stress transport modeling	12
Dependence of high-density-ratio Rayleigh-Taylor spike on initial perturbations	12
Homogenizing interfacial shear stress in brick-and-mortar structured composites via gradient modulus for enhanced mechanical properties	12
The stress transfer mechanism of nacre-like composites under off-axis tensile loading	12
A practical approach to flow field reconstruction with sparse or incomplete data through physics informed neural network	12
Effects of simplified horn ice shapes on flow structures around an airfoil	12
Dynamics and vibration reduction performance of a cross-type motion amplified nonlinear energy sink	11
Enhanced ballistic resistance of SiC ceramic-fiber composite armor: an investigation of fiber laminate backing effects and fragmentation dynamics	11
How does supergravity affect combustion?	11
Energy absorption and failure mechanisms of nacre-like structure under low/high-velocity impact loading: a numerical study	11
Dynamic response of gyroscopic flexible structures with interval parameters	11
Data-driven approach for extracting the most probable exit trajectory of stochastic dynamical systems with non-Gaussian Lévy noise	11
Supergravity effects on flame propagation and structure in hydrogen/air mixtures	11
Theoretical modeling of trail formation of a migrating neutrophil on substrate	11
Damping evolution mechanism of panel embedded with heterogeneous acoustic black hole array	11
Dynamic phononic crystals with spatially and temporally modulated circuit networks	11
Physics-informed neural networks for predicting velocity and pressure fields from wave elevation based on Boussinesq model	11
A topology optimization for finite 1D phononic structures with objective function involving tangential derivative quantities using TDBIE	11
Practical framework for data-driven RANS modeling with data augmentation	11
Static and dynamic mechanics of cell monolayers: A multi-scale structural model	11
Atomistic study on the effects of short-range order on the creep behavior of TiVTaNb refractory high-entropy alloy at high temperature	10
Post-buckling analysis of square film under in-plane torsion: experiment and simulation comparisons	10
Fracture analysis of a plane crack problem under chemo-mechanical loading	10
Analysis of transverse shear wave in pre-stressed piezoelectric fiber-reinforced composite cylindrical models with non-ideal interface: a comparative study	10
Response of wind turbine loads to multi-scale turbulent structures: a study based on turbulence signals observed in the field	10
Statistics of temperature and velocity fluctuations in supergravitational convective turbulence	10
Strain-induced fast domain wall motion in hybrid piezoelectric-magnetostrictive structures with Rashba and nonlinear dissipative effects	10
A fast method based on deep learning for predicting the impact load of vehicle-mounted howitzer cab	10
Active control of large space antenna truss structures using the equivalent beam model	10
Small symmetrical deformation and stress analysis of catenary shells of revolution	10
Bicycle dynamic modeling and stability analysis with a toroidal-shaped tire geometry	10
Phase field modeling of the aspect ratio dependent functional properties of NiTi shape memory alloys with different grain sizes	10
Nonlinear support loss in micro/nano beam resonators induced by geometric nonlinearity	10
Improvements of cohesive zone model on artificial compliance and discontinuous force	10
Model predictive control based on LSTM neural network for maglev vehicle’ suspension system	10
Influence of material uncertainties on thermo-mechanical postbuckling behaviour of graphene reinforced functionally graded porous beams	10
A systematic study on the energy absorption performance of plate-lattices: performance, design, and optimization	10
Study on prediction model of cavitation erosion incubation period of duplex stainless steel surfacing layer in a benign medium	9
Numerical study on a throttling segregated fuel-oxidizer system using quasi-one-dimensional internal ballistics model	9
Application of physics-informed neural networks for nonlinear buckling analysis of beams	9
Noise reduction in cavity flow by addition of porous media	9
Numerical simulation of hydraulic fracture characteristics in gas hydrate bearing-sediments by using CDEM	9
Simultaneous time-resolved PIV measurements of two orthogonal planes in a flat-plate turbulent boundary layer at moderate Reynolds numbers	9
Influence of neck width on transient flow characteristics in saccular intracranial aneurysm models	9
Numerical investigation of efficient synthetic jets generated by multiple-frequency actuating signals	9
Effect of inclined configuration of superficial neuromast on hydrodynamic signal perception of the fish lateral line	9
Efficient implementation of the $$k-{\sqrt{k}} L$$ turbulence model with the discontinuous Galerkin method	9
SPH-EBG simulation of oil spill containment by a flexible boom	9
Numerical investigation on vortex dynamics of flow around a pitching hydrofoil via the finite-domain impulse theory	9
Comparison between fully resolved and time-averaged simulations of particle cloud dispersion produced by a violent expiratory event	9
Machine learning assisted modeling of thermohydraulic correlations for heat exchangers with twisted tape inserts	9
A two-step variational Bayesian Monte Carlo approach for model updating under observation uncertainty	9
Laser-induced shock response of shear thickening fluid	9
An optimal control method of internal resonances for vibration isolation system using an aperiodic isolator	9
Negative Poisson’s ratio locally resonant seismic metamaterials vibration isolation barrier	9
Reconstructing the neutrally-buoyant particle flow near a singular corner	9
Onward and upward—Celebrating the 40th anniversary of Acta Mechanica Sinica	9
A newly designed personalized interbody fusion cage and its biomechanical analysis	9
Ultra-chaos of square thin plate in low Earth orbit	9
Variant selection map of external load during Ni4Ti3 precipitation in nitinol: a theoretical and phase field study	9
Dynamic equivalence conditions for an air-bearing simulator emulating scaled drag-free control dynamics	9
Optimal design and dynamic performance analysis of HMDV suspension based on bridge network	9
Temperature fluctuations and heat transport in partitioned supergravitational thermal turbulence	9

Glide-reflection symmetric phononic crystal interface: variation on a theme	9
Hydrodynamic performance of KCS ship in steady turning: experimental and numerical studies	9
Signal-to-noise ratio gain of an adaptive neuron model with Gamma renewal synaptic input	9
Morphological design and tunable mechanical properties of 3D spinodal membrane structures: adaptive coarse-grained modelling	9
Algebraic equations and non-integer orders of fractal operators abstracted from biomechanics	9
Multi-phase-field method for heterogeneous brittle material with reduced-order-homogenization	9
A dynamic topology optimization method considering the viscoelastic material degradation based on the entropy-degradation theorem	8
Advances in the study of high-speed attachment-line boundary layer transition	8
On methodology and application of smoothed particle hydrodynamics in fluid, solid and biomechanics	8
Hydrodynamic interactions between two self-propelled flapping plates swimming towards each other	8
An iterative interval analysis method based on Kriging-HDMR for uncertainty problems	8
A lumped mass finite element formulation with consistent nodal quadrature for improved frequency analysis of wave equations	8
Multi-harmonic equivalent modeling for a planar repetitive structure with polynomial-nonlinear joints	8
Quasi-Lagrangian equations and its energy-conservative numerical integration for nonlinear dynamic systems	8
Modeling the rate-dependent ductile-brittle transition in amorphous polymers	8
Decoupling analysis of stress components on monocrystalline silicon using angle-resolved oblique backscattering Raman spectroscopy	8
Improved Guide-Weight method for multi-material topology optimization under inertial loads based on the alternating active-phase algorithm	8
Effect of solid particle erosion on fracture strength of low density polyethylene film	8
Impact granular media for intruders with different geometries: force and rheology	8
The failure mechanism of curved composite laminates subjected to low-velocity impact	8
On modelling fluid/body interactions, impacts and lift-offs	8
Deformation and perforation of thin metal plate under normal penetration of elliptical cross-section projectiles	8
Cross-scale indentation scaling relationships of strain gradient plastic solids: Influence of inclusions near the indenter tip	8
A comparison between artificial neural network and random forest on predicting ferrofluids viscosity under magnetic field application	8
Reconstruction of internal flow field in waterjet propulsion pump based on EnKF data assimilation	8
Machine learning-encoded multiscale modelling and Bayesian optimization framework to design programmable metamaterials	8
Lubrication theory for free-surface flows with finite slopes and fluxes	8
Vortex domain structures induced by strain gradient reduce ferroelectric brittleness	8
Nonlinear forced vibration of thermo-electro-elastic piezoelectric-graphene composite nanoplate based on viscoelastic foundation	8
Instability of wave complex resulting from oblique detonation decoupling	8
Quantitative biomechanical analysis of ureteral obstruction and peristalsis	8
Artificial neural network based stamping process design for three-point bending	8
Compensation strategy for quasi-zero-stiffness vibration isolator under payload mismatch	7
Asymmetric bias-tunable surface adhesion of semiconductor nanofilms	7
Thermal buckling, vibration and transient response of rotating GNPs-reinforced porous microbeams in thermal environment	7
A dispersion-based impact identification method: mechanical model and experimental verification	7
Lagrangian-based spatial-temporal topological study on the evolution and migration of coherent structures in wall turbulence	7
Generation of sound waves by nonlinearly evolving ring-mode coherent structures on a turbulent subsonic circular jet: a comparative study of two mechanisms	7
Inflated circular membrane in contact with finite indentors of different geometries	7
Numerical simulation of noise generated by shock (wave) and boundary layer interaction in aero-engine inlet	7
Simulations of the localized necking and Lüders band in irradiated metals by crystal plasticity	7
An approach to calculate surface effects of polyhedron nanocrystals and its application in silicon nanowires	7
Related turbulent momentum and passive scalar transfer in a turbulent channel flow	7
Experimental study of the biomechanics of osteoarthritis of the knee by pulsed electrical stimulation	7
Enhanced electroactive β-phase formation in electrospun poly (vinylidene fluoride-co-hexafluoropropylene) nanowires with gold nanoparticles	7
Efficient multi-material topology optimization design with minimum compliance based on ResUNet involved generative adversarial network	7
Effects of the superhydrophobic surface on coherent structures in the turbulent boundary layer	7
Creep behavior of a film cooling hole at different inclination angles in complex temperature fields	7
A strain mode spectral digital image correlation method for displacement field analysis	7
A synchronous thermal-mechanical in-situ device for dynamic fracture initiation	7
Nano-indentation and nano-scratch of flexible intraocular lens material at the molecular scale	7
Modeling of curing process and residual stress analysis of thick-section thermosetting composites	7
Patient-specific bicuspid aortic valve hemodynamics study based on computer simulation and in vitro experiment	7
A novel multi-layer isolation structure for transverse stabilization inspired by neck structure	7
Aircraft propeller erosion wear and aerodynamic characteristics	7
Mechanistic investigation of gas injection treatment in a continental shale gas condensate reservoir	7
Does the decoration of irradiation defects induce hardening?	7
Large-eddy simulation for the aero-vibro-acoustic analysis: plate-cavity system excited by turbulent channel flow	7
Modified multiplying-factor integration method for solving exponential function dual integrals in crack problems	7
Dynamics of strain-mediated magnetic transverse domain walls in bilayer heterostructure under transverse magnetic field	7
Study on the dynamical characteristics and experimental validation for liquid sloshing in a common bulkhead tank	7
Applying machine learning to study fluid mechanics	7
High-order discretization of the Reynolds stress model with an εβ-adaptive algorith	7
Theoretical modeling of the mechanical properties of biological fibers and bundles with hierarchical chiral structures	7
A modeling method for elastic-viscous-plastic material with fractal structure and its solution	6
A coupled IBM/Euler-Lagrange framework for simulating shock-induced particle size segregation	6
Diode behaviors of curved elastic wave metamaterials with a nonlinear granular chain	6
Locomotion of active matter over a circular cylinder in a microchannel	6
Yield and buckling stress limits in topology optimization of multiscale structures	6
Constitutive modelling of a coarse sand under unfrozen and frozen states	6
A constrained proof of the strong version of the Eshelby conjecture for three-dimensional isotropic media	6
A multiscale analytical model for superelastic deformation of gradient nano-grained NiTi shape memory alloys	6
Numerical study on effects of a module-scale crater on lunar plume-surface interaction	6
Effect of disk flexibility on nonlinear vibration characteristics of shaft-disk rotors	6
Simulation of cells mechanical responses during perfusion culture in Voronoi-lattice scaffolds using multiphase FSI model	6
Thermodynamics performance assessment of precooled cycle engines with ammonia as the fuel and coolant	6
Multi-resolution nonlinear topology optimization with enhanced computational efficiency and convergence	6
Analysis of mechanical behavior on anisotropic cylindrical superconducting materials with inclusions	6
Energy transfer between components of a cable stayed beam model under the concentrated excitation: 1:2 modal resonance	6
Theoretical analysis for the enhanced mechanism and optimal design of the backing layer on improving the ballistic resistance of the ceramic composite armor	6
Contact behaviors of rough surfaces under tension and bending	6
Opponent cart-pole dynamics for reinforcement learning of competing agents	6
On the effectiveness of local vortex identification criteria in the vortex representation of wall-bounded turbulence	6
Surface element design of nanomaterials considering surface curvature dependence	6
Mechanical analysis of circular hole affected by rigidity in inhomogeneous medium under anti-plane shear wave	6
Correction to: Improvement of the eN method for predicting hypersonic bound-ary-layer transition in case of modal exchange	6
Stability analysis of quasicrystal torsion micromirror actuator based on the strain gradient theory	6
Comparative assessment of liver tissue: from microstructural and mesoscale vascular architecture to macroscopic mechanics	6
Experimental study of the high-frequency instability in the hypersonic boundary layer over a cone at 6° angle of attack	6
Response prediction of elastic aircraft based on global transfer function	6
Effects of bottom deflectors on aerodynamic drag reduction of a high-speed train	6
Large deflection of a bilayer soft strip due to incompatibility of isotropic volumic expansion	6
New periodic lattice model with specific vibration absorption patterns at resonant frequencies	6
Neural network-augmented SED-SL modeling of turbulent flows over airfoils	6
New type of overrunning clutch based on curved-plate compression-torsion metamaterial	6