Journal of Engineering Mechanics

Papers
(The median citation count of Journal of Engineering Mechanics is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Influence of Particle Shape on Microstructure of Granular Materials under Gravity171
Effective Warping Properties and Buckling Analysis of Fiber-Reinforced Elastomeric Isolators73
Nonlinear Dynamics of a Broadband Vortex-Induced Vibration–Based Energy Harvester63
Stiffness Characteristics of Composite Beams and Application in Damage Identification61
Novel Nonlinear Dynamic Beam–Foundation Interaction Model52
Response Control of SDOF System with Inerter-Assisted Tuned Liquid Sloshing Damper47
Mesomechanical Behavior of Cement-Stabilized Macadam in Uniaxial Compression Tests47
Influence of Negative Stiffness Damper on Stay Cable with Neoprene Rubber Bushings37
Multisurface Plasticity for Concrete Subjected to Fire: A Spectral Decomposition–Based Approach37
Calibration of the Statistical-Interference Factors for the Design of Tempered Structural Glass37
An Explicit Time Integration Method Based on the Verlet Scheme with Improved Characteristics in Numerical Dispersion37
Interface Homogenization Approach for Mechanical Healing Driven by Pressure Solution36
Shock Environment Assessment of Underground Arch–Wall Structures Subjected to Ground Shock35
A Finite-Strain Simulation of 3D Printed Airless Tires35
The Log-Law of the Wall in the Overlap from a Functional Equation31
Dual Poroviscoelastic Wave Barriers for Compliant Floating Platforms28
A Frequency-Based Ground Motion Clustering Approach for Data-Driven Surrogate Modeling of Bridges27
Bayesian Nonlocal Operator Regression: A Data-Driven Learning Framework of Nonlocal Models with Uncertainty Quantification24
Finite-Element Modeling and Optimization of 3D-Printed Auxetic Reentrant Structures with Stiffness Gradient under Low-Velocity Impact23
Soft Missing Rib Structures with Controllable Negative Poisson’s Ratios over Large Strains via Isogeometric Design Optimization22
Crashworthiness of Multicellular Tubes under Axial Compression Based on Polygonal Origami Folding22
Development of Miniature Tensile-Test System of Intermediate Strain Rate Based on Electromagnetic Launch22
Fracture in 3D-Printed Concrete Beams: Deflection and Penetration of Impinging Cracks at Layer Interfaces22
Numerical Study of the Blast Mitigation Effect of the Shape of a Partially Confined Geometry and Scaling of the Blast Wave Strength20
Interaction between Instabilities in Vertical-Axis Turbine Blades19
Modeling Liquefaction-Induced Large Deformation of Sand Incorporating the Effects of Fabric Anisotropy Evolution19
Recent Advances in Computational Methods in Engineering Mechanics19
Applications of Space–Time Elements18
Probabilistic Analysis on Stochastic Failure Modes of Reinforced Concrete Beams under Fatigue Loading18
Thermal Buckling and Vibrational Analysis of Carbon Nanotube Reinforced Rectangular Composite Plates Based on Third-Order Shear Deformation Theory17
Accurate Response Sensitivity Analysis of a Thermomechanical Constitutive Model for Superelastic SMAs17
A Computationally Efficient Approach for Estimation of Tissue Material Parameters from Clinical Imaging Data Using a Level Set Method17
Sensitivity and Efficiency Analyses of Two Wood Cell Wall Structural Models17
A Model for Coupled Fluid Velocity and Suspended Sediment Concentration in an Unsteady Stratified Turbulent Flow through an Open Channel17
Size Effect on Strength Statistics of Prenotched Quasibrittle Structures17
Machine Learning Approach to Model Order Reduction of Nonlinear Systems via Autoencoder and LSTM Networks17
Microstructure-Based Equivalent Visco-Hyperelastic Model of Viscoelastic Damper16
Effect of Ground Freezing with Liquid Nitrogen on Freezing Rate and Mechanical Properties of Coastal Clayey Silt16
Research on Mode I Crack Propagation Problem Using the Base Force Element Method Based on the Complementary Energy Principle15
Kinetic Temperature of Structures for Resilience, Instability, and Failure Analysis of Building Systems15
Two Different Approaches for Collapse of Nonsymmetric Masonry Arches: Monasterio’s Treatment versus Limit Equilibrium Analysis15
Analytical and Numerical Approach to Detect Limit and Bifurcation Points of Mises Truss with Out-of-Plane Lateral Linear Spring15
Two-Dimensional Analysis of Size Effects in Strain-Gradient Granular Solids with Damage-Induced Anisotropy Evolution14
Noncircular Cavity Expansion in Undrained Soil: Semi-Analytical Solution13
Efficient Structural Reconnaissance Surveying for Regional Postseismic Damage Inference with Optimal Inspection Scheduling13
Mechanical Behavior of Shape-Memory Alloy Triply Periodic Minimal Surface Foam Based on Schwarz Primitive13
Time-Differencing Fundamental Solutions for Plane Elastodynamics13
Innovative Formulation for the Bending of Plates with Reentrant Angles13
Semianalytical Solution for Dissipation Process of Partially Saturated Soils Considering Nonsmooth Boundary and Stress Level13
Free and Forced Vibrations of an Undamped Double-Beam System Carrying a Tip Mass with Rotary Inertia13
Analytical Models to Determine In-Plane Damage Initiation and Force Capacity of Masonry Walls with Openings13
Generalization of the Singum Model for the Elasticity Prediction of Lattice Metamaterials and Composites13
Analysis and Physical Interpretation of the Uncertainty Effect in Structural Dynamics12
Probabilistic Modeling of Discrete Structural Response with Application to Composite Plate Penetration Models12
Energy-Based Fracture Criterion of Rock–Concrete Interface Considering Viscoelastic Characteristics12
Pavement Mechanics Calculation Based on the Analytical Solution of Layered Viscoelastic System under Horizontal and Vertical Loads12
A Complex Variable Solution for Shallow Rectangular Tunnel in Semi-Infinite Plane12
Static Analysis on Some Typical Tensegrities with Additional Cables12
Interpretation of Real-Time Hybrid Simulation as Neutral and Retarded Delay Systems for Its Stability Analysis11
Mechanism of Elastic–Plastic Crack Initiation in Unsaturated Rock Cracks under Gas–Ice Pressure at Low Temperatures11
The Effect of Prior Parameters in a Bayesian Approach to Inferring Material Properties from Experimental Measurements11
Crack-Parallel Stress Effect on Fracture of Fiber-Reinforced Concrete Revealed by Gap Tests11
Fully Coupled Model for One-Dimensional Large-Strain Consolidation and Heat Conduction in Saturated Clay11
Numerical Simulation of the Chloride Penetration in Cracked and Healed UHPC via a Discrete Multiphysics Model11
Evolution of Void Fabrics and Their Effects on Liquefaction Behaviors of Granular Soils: Insight from DEM-Clump Simulation11
Surface and Interfacial Wave Propagation over an Undulating Bottom in a Stratified Fluid with a Moored Porous-Flexible Barrier11
Shape Reconstruction Method for Monitoring Large Deformed Beam Structures11
Probabilistic Model Based on Bayesian Model Averaging for Predicting the Plastic Hinge Lengths of Reinforced Concrete Columns10
Numerical Block-Based Simulation of Rocking Structures Using a Novel Universal Viscous Damping Model10
Plastic-Damage Cap Model with Crack Closure Behavior for Concrete Modeling10
Bounding Surface Plasticity Model for Clay under Cyclic Loading Conditions Considering Fabric Anisotropy10
Experimental and Theoretical Study on Nonlinear Behavior of Compression-Mode Viscoelastic Dampers under Different Excitations and Temperatures10
Exploration of the Nonlinear Effect of Pendulum Tuned Mass Dampers on Vibration Control10
Numerical Simulations of Particle Behavior and Crushing within a Pressurized Sand Damper Subjected to Cyclic Loading10
A Modified Fractional-Order Derivative Zener Model for Rubber-Like Devices for Structural Control10
Liquid Cavitation during Nitrogen Sorption on Soils10
Modeling Multidimensional Multivariate Turbulent Wind Fields Using a Correlated Turbulence Wave Number–Frequency Spectral Representation Method10
Experimental and Numerical Study on Mixed Mode I-II Fatigue Crack Propagation in Concrete10
Assessment of the Effect of Design Parameters of Pressurized Sand Dampers from Component Testing10
Active Control Based on Hedge-Algebras Theory of Seismic-Excited Buildings with Upgraded Tuned Liquid Column Damper10
Experimental Characterization of Frictional Line Contact by Digital Image Correlation and Inverse Method10
Eigenmodes Solution and Analysis of Combined Structures Using Improved Coupling Energies9
Study on the Mechanism of Tunnel Subhorizontal Jet Grouting Reinforcement Based on a Shell Model on Two-Parameter Foundation9
Improved Methodology for Accurate Prediction of Blast Wave Clearing on a Finite Target9
LS-DYNA Machine Learning–Based Multiscale Method for Nonlinear Modeling of Short Fiber–Reinforced Composites9
Shape-Based Strategy for Inverse Estimation of Soft Tissue Mechanical Material Properties from Untagged Medical Imaging Data9
Bridge Flexibility Identification through a Reference-Free Substructuring Integration Method Driven by Mode Fitting9
Simultaneous Buckling, Contact, and Load-Carrying Capacity9
Effect of Hydrate Failure in ITZs on the Initiation of Prepeak Nonlinearities of Concrete under Multiaxial Compression9
Efficient Iterative Analytical Model for Underground Seepage around Multiple Tunnels in Semi-Infinite Saturated Media9
Efficient System Reliability–Based Disaster Resilience Analysis of Structures Using Importance Sampling9
Analytical Solution to Transversely Isotropic Hollow Cylinder under Axisymmetric Surface Loading Using Variational Principle9
Discrete Lattice Modeling of Wave Propagation in Materials with Heterogeneous Microstructures9
Two-Scale Discrete Element Modeling of Gyratory Compaction of Hot Asphalt9
Analysis of a Celestial Icosahedron9
Numerical Simulation of Viscoelastic Behavior of Asphalt Mixture Using Fractional Constitutive Model9
Thermodynamic Behaviors of a Viscoelastic Plate for Vibration Control with Nonlocal Effect and Temperature-Dependent Properties when Subjected to a Moving Heat Source9
Scaling Laws for Rigid-Body Response of Masonry Structures under Blast Loads9
Computationally Efficient Adaptive Design of Experiments for Global Metamodeling through Integrated Error Approximation and Multicriteria Search Strategies9
Strain Gradient–Based Thermomechanical Nonlinear Stability Behavior of Geometrically Imperfect Porous Functionally Graded Nanoplates8
Multisize Discrete Solid-Element Method for Continua8
A Dynamic Constitutive Model for Rock Materials Subjected to Medium- and Low-Strain-Rate Dynamic Cyclic Loading8
Rutting Predictions in Flexible Airfield Pavements Using a Newly Modified Drucker–Prager Combined Hardening Model with Progressively Evolving Yield Surface8
Size-Dependent Nonlinear Free and Forced Vibration Analyses of a Functionally Graded Microplate Subjected to Transverse Patch Loading8
Off-Diagonal Dispersion Effect with Pollutant Migration in Groundwater System8
Modeling of Corrosion Pit Growth for Buried Pipeline Considering Spatial and Temporal Variability8
Modeling Foot–Floor Interactions during Walking for Normal and Abnormal Gaits8
Mechanism of Grain and Twin Nanoboundaries Making Strength and Wear Resistance Different in CoCrFeNiCu: A Molecular Dynamics Study8
Evaluation of Coefficients of Mode III Crack-Tip Asymptotic Fields Using Weak Form Quadrature Elements8
Fillunger–Heinrich’s Theory of Porodynamics: Predictive Power and Analytical Solution8
Aeroelastic Real-Time Hybrid Simulation. II: Mitigation of Vortex-Induced Vibration of a Tall Building Structure8
Neural Network–Augmented Physics Models Using Modal Truncation for Dynamic MDOF Systems under Response-Dependent Forces8
Improved Explicit Integration Algorithms with Controllable Numerical Damping for Real-Time Hybrid Simulation7
Regularized Density-Driven Damage Mechanics Model for Failure Analysis of Cementitious Composites7
Generalized Discrete Estimating Method for Moving Force Identification on a Simply Supported Beam Bridge7
Effect of Heavy-Duty Electric Vehicles on Tire–Pavement Contact Forces7
Data-Driven Modeling of Parameterized Nonlinear Dynamical Systems with a Dynamics-Embedded Conditional Generative Adversarial Network7
Advanced Finite Elements for Geometrically Nonlinear Analysis of Rectangular Plates under Various In-Plane Loadings Accounting for the Boundary Conditions of the Stiffeners7
Generalized Stratified Sampling for Efficient Reliability Assessment of Structures against Natural Hazards7
Cold-Formed Cross-Sectional Folds with Optimal Signature Curve7
A Probabilistic Crowd–AI Framework for Reducing Uncertainty in Postdisaster Building Damage Assessment7
Flow–Structure Interaction Mechanism under Coriolis Conditions7
Level-Set and Learn: Convolutional Neural Network for Classification of Elements to Identify an Arbitrary Number of Voids in a 2D Solid Using Elastic Waves7
Edge and Crack-Induced Debonding Analysis of FRP-Strengthened Concrete Beams Using Innovative Beam Finite Elements7
Optimal Shape of an Arch under a Central Point Load for Maximum Buckling Load7
Multiaxial Damage Ratio Strength Criteria for Fiber-Reinforced Concrete7
Pressurized Sand Damper for Earthquake and Wind Engineering: Design, Testing, and Characterization7
Mixing of Twin Particle Clouds in Stagnant Water7
Micromechanical Investigation of Particle-Size Effect of Granular Materials in Biaxial Test with the Role of Particle Breakage7
A Methodology for Imprecise Moment-Independent Global Sensitivity Analysis with Limited Data of Copula-Dependent Inputs: Application for Slopes7
A Multilevel Adaptive Mesh Scheme for Efficient Simulation of Thermomechanical Phase-Field Fracture7
Seismic Control of Story Isolation System Using Tuned Mass Damper Inerter7
Dealing with Nonlattice Data in Three-Dimensional Probabilistic Site Characterization7
A State-Space Method for Vibration of Double-Beam Systems with Variable Cross Sections6
Reliability Analysis of Structures by Active Learning Enhanced Sparse Bayesian Regression6
Discrete Structural Systems Modeling: Benchmarking of LS-DEM and LMGC90 with Seismic Experiments6
Discussion of “On the DLVO Theory: Experimentally Measured Debye–Hückel Length”6
Structural Dynamics Feature Learning Using a Supervised Variational Autoencoder6
Approximating Fracture Paths in Random Heterogeneous Materials: A Probabilistic Learning Perspective6
Influence of Stereotomy on Discrete Approaches Applied to an Ancient Church in Muccia, Italy6
Comparison of Constrained Unscented and Cubature Kalman Filters for Nonlinear System Parameter Identification6
Time-Dependent Elastoplastic Stress of an Infinite Matrix around a Growing Poroelastic Inhomogeneity Inclusion6
Dynamic Performance of Time-Domain Piecewise Linear Stiffness System6
Dynamic Torsional Vibration of a Pipe Pile in Radial Heterogeneous Transversely Isotropic Saturated Soil6
Hypoplastic Modeling of Anisotropic Sand Behavior Accounting for Rotation of Principal Stress Direction6
Identification of Frequencies and Track Irregularities of Railway Bridges Using Vehicle Responses: A Recursive Bayesian Kalman Filter Algorithm6
Three-Variate Nonstationary Probabilistic Wind Field Modeling with Time-Varying Spatial Coherence via the NUFFT-Enhanced Stochastic Wave–Based Spectral Representation Method6
Physics-Informed Multifidelity Residual Neural Networks for Hydromechanical Modeling of Granular Soils and Foundation Considering Internal Erosion6
LIGO Newtonian Noise Cancellation Using Metamaterial-Based Periodic Structures6
Effect of Wrapping Force on the Effective Stiffness of Packed Parallel Wire Cables with Elastoplastic Contacts6
Numerical Modeling of Nanoparticle Injection and Ionic Removal for Cementitious Materials6
Investigation of Oblique Flexural Gravity Wave Scattering by Two Submerged Thin Vertical Porous Barriers with Different Porosities6
Efficient Method for Simulating Nonstationary and Non-Gaussian Stochastic Ground Motion with Known Time-Varying Statistical Moments6
Interval Analysis of Interior Acoustic Field with Element-By-Element-Based Interval Finite-Element Method6
Simulation of the Behavior of Structured Clay Using Nonassociated Constitutive Model with and without Anisotropic Fabric at Critical State6
Theoretical Model of Seismic Fracture Prediction for Low-Yield-Point Steel LYP225 and Its Validation6
Cyclic Metal Plasticity Model Parameters with Limited Information: Constrained Optimization Approach6
Developing a New Understanding of the Impulse Response Test for Defect Detection in Concrete Plates6
Influence of the Perturbation Amplitude and the Froude Number on the Establishment Length of Roll Waves6
A Whole-Rate-Region Fatigue Crack Growth Model Incorporating Nonlinear Rate Evolution Characteristics Based on a Peridynamic Approach6
A Numerical Study on the Multiphase Newtonian and Non-Newtonian Displacement in a Porous Micromodel via Water–Surfactant–Polymer Flooding5
A 3D Coupled Finite-Element Model for Simulating Mechanical Regain in Self-Healing Cementitious Materials5
Parameter Estimation of Stochastic Fractional Dynamic Systems Using Nonlinear Bayesian Filtering System Identification Methods5
Stability Conditions for General Tensegrity with Rigid Bodies5
Mixing Phase Study of a Concrete Truck Mixer via CFD Multiphase Approach5
Investigating Performance of Tuned Liquid Damper Using Finite-Element Method Based on Lagrange and Hankel Functions with Nonlinear Boundary Conditions5
Nonlinear Vibration of FG Graphene Origami Auxetic Sandwich Plate Including Smart Hybrid Nanocomposite Sheets5
A Bayesian Vine Algorithm for Geotechnical Site Characterization Using High Dimensional, Multivariate, Limited, and Missing Data5
Effect of Multiscale Particle Morphology on Small-Strain Shear Modulus of Irregularly Shaped Sand under Isotropic Consolidation: Triaxial Bender Element Tests on 3D-Printed Sand5
First-Principles Electrophysiological Models of Cardiac Ventricular Myocytes as a Basis of Multiscale Mechanics of the Heart5
Physics-Informed Deep Learning for Computational Elastodynamics without Labeled Data5
An Edge-Based Smoothed Finite-Element Method for Vortex-Induced Vibration in Generalized Newtonian Fluids5
Model Updating Methods Using Complex Eigenvalues: Sensitivity-Based versus Cross-Model Cross-Mode5
Frequency-Dependent Nonreflecting Boundary for Absorbing Lamb Waves Based on Lysmer and Kuhlemeyer Absorbing Boundary5
Vibration Control of Structures by an Upgraded Tuned Liquid Column Damper5
Instantaneous Power Balance Algorithm for Flutter Critical Wind Speed Prediction of Bridge Girders5
Applying a 3D Re-Entrant Auxetic Cellular Core to a Graphene Nanoplatelet–Reinforced Doubly Curved Structure: A Sound Transmission Loss Study5
Shape Reconstruction of a Timoshenko Beam under the Geometric Nonlinearity Condition5
Nanomechanics of ASR Gels from Coarse-Grained Simulations5
Coupling-Based Elastic Solution of Arching Evolution for GRPSE5
Simplified Analytical Solutions for Tunnel Settlement Induced by Axially Loading Single Pile and Pile Group5
Multilayered Randomized Architected Material under Tensile Loading for a Tensegrity Structure5
Dynamic Response of Poroelastic Soil Adjacent to an Axially Vibrating Pile5
Laplace- and Frequency-Domain Methods on Computing Transient Responses of Oscillators with Hysteretic Dampings to Deterministic Loading5
Embedding Prior Knowledge into Data-Driven Structural Performance Prediction to Extrapolate from Training Domains5
Micromechanical Study of Porosity Effects on Coupled Moisture-Mechanical Responses of Viscoelastic Asphalt Concrete5
CNN-Based Surrogate for the Phase Field Damage Model: Generalization across Microstructure Parameters for Composite Materials5
Static–Dynamic Universal Strength Criterion for Concrete Material5
Full-Waveform Inversion of Incoherent Dynamic Traction in a Bounded 2D Domain of Scalar Wave Motions5
Plastic Collapse Modes of Truss Structures under Complex Loading Cycles5
Efficient Geotechnical Reliability Analysis Using Weighted Uniform Simulation Method Involving Correlated Nonnormal Random Variables5
Environmentally Friendly Vertical Wall Breakwater with Culvert for Encircled Harbor Basin5
Functionally Graded Beams as Surrogate Structural Models: Shear Beam with Exponentially Graded Rigidity4
Analysis of the Mechanical and Mathematical Properties of the Tensors of Coupled Thermoelastic Isotropic Laminates by the Polar Method4
Role of Material Fabric in Flexural Failure in Concrete4
Micromechanics of Fiber–Concrete Interaction: Numerical Modeling and Experimental Validation4
Exploiting DEM to Link Thermal Conduction and Elastic Stiffness in Granular Materials4
Archetype Dynamically Equivalent 3-DOF Model to Evaluate Seismic Performances of Intermediate Discontinuity in Frame Structures4
Stress–Strain Response of Optical Fibers in Direct Tension4
Coupled Experimental and Computational Investigation of the Interplay between Discrete and Continuous Reinforcement in Ultrahigh Performance Concrete Beams. II: Mesoscale Modeling4
Near-Real-Time Identification of Seismic Damage Using Unsupervised Deep Neural Network4
Field-Enriched Finite-Element Method for Simulating Crack Propagation and Coalescence in Geomaterials4
Theoretical Models for the Borehole Pressure of Air-Decoupled Charge with Discontinuous Interface Conditions4
Unified Modeling of Interface between Structured Clay or Crushable Sand and Structure4
The Problem of Tension–Torsion of Pretwisted Elastic Beams Revisited4
Analysis of Rectangular Orthotropic Membranes for Mechanical Properties Identification through Load-Displacement Data4
Bayesian Optimal Sensor Placement for Damage Detection in Frequency-Domain Dynamics4
A Gradient-Enhanced Damage Model with a New Equivalent Strain Based on the Menétrey–Willam Function4
Elastoplastic Constitutive Model of Sand–Gravel Composites Considering the Whole Shearing Process4
Deterministic and Random Vibration of Linear Systems with Singular Parameter Matrices and Fractional Derivative Terms4
A Critical Evaluation of Some Constitutive Models for Finite-Element Simulation of Structural Steel Components4
Model Updating of Nonproportionally Damped Structural Systems Using an Adapted Complex Sum-of-Squares Optimization Algorithm4
Formulation of Constitutive Viscoelastic Properties of Modified Bitumen Mastic Using Genetic Programming4
Effects of Secondary Current on the Local Erosion Induced by Circular Turbulent Wall Jets in Cross Flow4
S-N Fatigue Curve Determination for Corroded High-Strength Bridge Wires3
An Explicit Solution of Modal-Damping Ratios for Higher Modes of a Cable with an External Damper3
Dynamic Behavior of Interface Cracks in 1D Hexagonal Piezoelectric Quasicrystal Coating–Substrate Structures Subjected to Plane Waves3
Experimental Investigation and Multiscale Modeling of VE Damper Considering Chain Network and Ambient Temperature Influence3
Isogeometric Analysis for Nonlocal Vibration Characteristics of BFGP Curved Nanobeams with Variable Nonlocal Parameters3
Experimentally-Verified Micromechanical Model of MR Gels Based on Planar Current Loop Model3
Gaussian Process–Based Optimal Design of a Negative Stiffness Device under Stochastic Seismic Excitation3
Analytical Study on Response Power Spectral Density of Structures Subjected to Nonstationary Excitation Considering Transient Responses3
Discrete-Element Quantification of the Noncoaxiality of Anisotropic Granular Materials under Orientational Rotational Shear3
Diffraction of Magnetoelastic Plane Waves through a Rigid Strip in an Orthotropic Medium: An Analytical Approach3
What Controls Fabric: A Correlation Analysis for Contact Fabric Evolution in Granular Media3
Elastic Wave Propagation Analysis Using the Space-Time Discontinuous Galerkin Quadrature Element Method3
Mesoscale Investigation of Fine Grain Contribution to Contact Stress in Granular Materials3
Discrete Fresh Concrete Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete Flow3
Lifetime Resilience Measurement of River-Crossing Bridges with Scour Countermeasures under Multiple Hazards3
2022 EMI Conference Student Competition Finalist Papers3
Study on the Hysteresis Performance of Notch-Type Compliant Joints Based on Experimental and Finite-Element Simulation3
Aging Epidemiology: A Hereditary Mechanics–Inspired Approach to COVID-19 Fatality Rates3
The Combined Effect of Normal Stress and Mechanical Vibration on Wheat Packing Density3
Erratum for “Multivariate Extreme Wind Loads: Copula-Based Analysis”3
Linear Stability Analysis and CFD Simulation of Thermal Viscous Fingering Instability in Anisotropic Porous Media3
Response Estimation of Multi-Degree-of-Freedom Nonlinear Stochastic Structural Systems through Metamodeling3
Minkowski Sum–Enhanced 3D Mesoscale Structure Model for Concrete with High Aggregate Volume Fractions3
Fluid Seepage into a Rotating Channel Filled with a Porous Medium3
Dynamic Increase Factor of an Equivalent SDOF Structural System for Beams with Different Support Conditions under Conventional Blast Loading3
Analytical Approach to Estimating the Influence of Shotcrete Hardening Property on Tunnel Response3
Special Collection on the EMI Conference Student Competition Finalist Papers3
Probabilistic Comparative Analysis of Vehicle–Bridge Interaction Models for Predicting Bridge Response under Moving Vehicles3
Consolidation Theory of Unsaturated Soils with Vertical Drains Considering Well Resistance and Smear Effect under Time-Dependent Loading3
Dislocation Density Evolution in Low-Cycle Fatigue of Steels Using Dislocation-Based Crystal Plasticity3
Dynamics-Based Analytical Correlation between Flexure–Shear Coupled Model and Frame–Tube–Outrigger Model for Frame Core–Tube Structural Systems3
A Gradient-Enhanced Thermo-Poro-Elastoplastic Finite-Element Model for Stimulated Volume Evolution in Porous Media3
A Piezoelectric Mechanical-Like Beam Element with Superconvergence Property3
Analytical Solution for Consolidation of Composite Column–Reinforced Ground in Unsaturated Soils Including Smear Effect and Time-Varying Loading3
Interaction between a Solitary Wave and a Fixed Partially Submerged Body with Two Extended Porous Walls3
Postcritical Imperfection Sensitivity of Functionally Graded Piezoelectric Cylindrical Nanoshells Using Boundary Layer Solution3
0.14261889457703