TAPPI Journal

Article	Citations
Setting priorities in CNF particle size measurement: What is needed vs. what is feasible	25
CFD and predictive modeling of temperature and calcination in a rotary lime kiln – Potential for steadier kiln operation	9
Comparing a linear transfer function-noise model and a neural network to model boiler bank fouling in a kraft recovery boiler	8
Quantification of the degree of preference for different tissue products based on a hand-felt tissue test panel	8
A new and quick testing method for evaluating commercial OCC recycled pulp	8
Research on flame-retardant paper prepared by the method of in-pulp addition of ammonium polyphosphate	7
Dissolution of wood components during hot water extraction of spruce	6
Dynamic CFD modeling of calcination in a rotary lime kiln with an external dryer	6
A true green cover for industrial waste landfills	6
Editorial: Critical literature reviews in open source journals	6
Editorial: The next phase of research in academia and industry	6
Characterizing rheological behavior and fluidization of highly refined furnishes for process optimization	6
July 2023	6
Pilot scale black liquor concentration using pressure driven membrane separation	6
Editorial: Special issue showcases new additive approaches for a lignocellulose-based future	6
Determining operating variables that impact internal fiber bonding using Wedge statistical analysis methods	5
Remembering Dr. Peter W. Hart: Dedicated leader, mentor, friend	5
Editorial: Special pulping and engineering issues of TAPPI Journal yield important recovery cycle research	5
Polyvinylamine as a wet-end additive: Effects of pH and anionic contamination	5
Factors affecting deposit formation in foul condensate stripping systems	5
Incorporation of post-consumer pizza boxes in the recovered fiber stream: Impacts of grease on finished product quality	4
Tetraethyl orthosilicate-containing dispersion coating — water vapor and liquid water barrier properties	4
Boiler retrofit improves efficiency and increases biomass firing rates	4
Commercially relevant water vapor barrier properties of high amylose starch acetates: Fact or fiction?	4
Rethinking the paper cup — beginning with extrusion process optimization for compostability and recyclability	4

Three-dimensional visualization and characterization of paper machine felts and their relationship to their properties and dewatering performance	4
Coatings for sustainable paper-based flexible packaging: Barrier properties and processability	3
A model black liquor formulation for use in development and evaluation of membranes for concentrating weak black liquor	3
August 2022	3
Kraft pulp viscosity as a predictor of paper strength: Its uses and abuses	3
Microbial load and proliferation associated with various face mask types and sources during the COVID-19 pandemic	3
Web lateral instability caused by nonuniform paper properties	3
Causes of poor dregs settling in a green liquor clarifier	3
Nanocellulose–cationic starch– colloidal silica systems for papermaking: Effects on process and paper properties	3
January 2023	3
April 2022	3
Predicting strength characteristics of paper in real time using process parameters	3
Considerations in managing wastewater odor at pulp and paper operations	2
Utilization of palm fiber as papermaking materials: Microscopic structure and chemical pulping	2
Impact and feasibility of a membrane pre-concentration step in kraft recovery	2
January 2022	2
Editorial: TAPPI’s ongoing efforts in standards development for the pulp, paper, and related industries	2
Control of continuous digester kappa number using generalized model predictive control	2
Test method and coating composition impact on measured moisture vapor transmission rate for waterborne coatings on paper	2
Paper bending stiffness and web tension measurement from a running web using a vacuum and computer imaging	2
Convolutional neural networks enhance pyrolysis gas chromatography mass spectrometry identification of coated papers	2
Utilization of kraft pulp mill residuals	2
Experiments and visualization of sprays from beer can and turbo liquor nozzles	2
The role of gas dispersion in the oxygen delignification process	2
August 2024	2
Sulfur makeup in an unbleached kraft pulp mill	2
Quantification of block testing for coated paper substrates	2
An analytical approach to assess the interrelation of surface properties and softness of tissue paper	2
Multifunctional starch-based barrier materials	2
Improvements in oil and grease resistance (OGR) test methodology for waterborne barrier coatings	2
Formic acid pulping process of rice straw for manufacturing of cellulosic fibers with silica	2
Ultrastructural behavior of cell wall polysaccharides	2
Review of coating cracking and barrier integrity on paperboard substrates	2
Production and characterization of furanic bio-oil from Kawayan kiling (Bambusa vulgaris Schrad ex. Wendl) using molten citric acid in an open system	2
Amphoteric dry strength chemistry approach to deal with low-quality fiber and difficult wet-end chemistry conditions in the Asian and North American markets	2
A new method of studying the fundamental mechanisms involved in pigment liberation from recycle papers	2
Experimental investigations into fold cracking of double coated barrier dispersion coatings	2
Furnishing autohydrolyzed poplar weakly alkaline P-RC APMP to make lightweight coated base paper	1
Calender barring review with experiences	1
Preparing prehydrolyzed kraft dissolving pulp via phosphotungstic acid prehydrolysis from grape branches	1
A discrete element method to model coating layer mechanical properties with bimodal and pseudo-full particle size distributions	1
March 2024	1
September 2023	1
Perfluoroalkyl and polyfluoroalkyl substances (PFAS) — Fibrous substrates	1
Editorial: Surface energy in printing is the focus of runner-up	1
Advantages of lean duplex stainless steels in the pulp and paper industry	1
Factors affecting phosphorus uptake/dissolution during slaking and causticizing	1
Colloid chemical aspects of paper formation in the presence of nanofibrillated cellulose and cationic starch	1
Energy saving potential of interstage screen fractionation for production of board grade BCTMP	1
On the diagnosis of a fouling condition in a kraft recovery boiler: combining process knowledge and data-based insights	1

Modeling the dynamics of evaporator wash cycles	1
Pulp and paper mills: The original biorefineries — past performance and limitations to future opportunities	1
November 2021	1
Mechanical modification of softwood pulp fibers using a novel lightweight vertical bar plate	1
September 2022	1
February 2022	1
Optimizing water and water vapor barrier properties of water-based barrier coatings	1
Modeling the influence of rheology on smooth rod coating systems	1
Using multi-method analysis to identify challenging paper machine deposits and defects	1
Effects of carboxymethyl starch as a papermaking additive	1
In-situ green synthesis and adsorption on methylene blue of copper-based metal organic framework/cellulose/chitosan (CCTSA/HKUST-1) composite aerogel	1
The influence of the fine structure of cellulose on the action of cellulases	1
Next generation dry strength additives: Leveraging on-site synthesis to develop high performance glyoxalated polyacrylamides	1
Co-pulping of Trewia nudiflora and Trema orientalis	1
May 2023	1
Techno-economic analysis of hydrothermal carbonization of pulp mill biosludge	1
SCC susceptibility of chromized type 409 stainless steel in alkaline chloride solutions at ambient temperature and pressure	1
May 2021	1
Eucalyptus black liquor properties in a lignin extraction process: density, dry solids, viscosity, inorganic, and organic content	1
Effects of different soda loss measurement techniques on brownstock quality	1
October 2023	1
A guide to eliminating baggy webs	1
Comparative study of guar gum and its cationic derivatives as pre-flocculating polymers for PCC fillers in papermaking applications	1
A feasibility study of using the organic Rankine cycle for power generation from the flue gases of recovery boilers	1
Application of ATR-IR measurements to predict the deinking efficiency of UV-cured inks	1
Water chemistry challenges in pulping and papermaking – fundamentals and practical insights: Part 1: Water chemistry fundamentals and pH	1
Improving refining efficiency with deflocculation	1
Extensive function of green synthesized titania nanoparticles: Photodegradation of Congo red	1
Filtration efficiency and breathability of selected face masks	1
Understanding the energy and emission implications of new technologies in a kraft mill: Insights from a CADSIM Plus simulation model	1
The role of hornification in the deterioration mechanism of physical properties of unrefined eucalyptus fibers during paper recycling	1
How do mud balls form in lime kilns?	1
The Effect of Component Removal Upon the Porous Structure of the Cell Wall of Wood. II. Swelling in Water and the Fiber Saturation Point	1
Effect of pressure and time on water absorption of coated paperboard based on a modified Cobb test method	1
Pareto-based design of experiments for identifying and comparing optimum sealing parameters of heat sealing applications in packaging machines	1
Totally chlorine-free peracetic acid pulping for nanocellulose isolation from hemp and poplar	1
Multilayering of conventional latex-based dispersion coatings containing small amounts of silica nanospheres: Runnability on a pilot scale flexographic coater and barrier performance	1
Influence of pallet pattern on top-to-bottom compression performance of unitized loads	1
Development of converging-diverging multi-jet nozzles for molten smelt shattering in kraft recovery boilers	1
Probing the molecular weights of sweetgum and pine kraft lignin fractions	1
Using bleaching stage models for benchmarking hardwood ECF bleach plants	0
Use of kaolin clay in aqueous barrier coating applications	0
Addressing production bottlenecks and brownstock washer optimization via a membrane concentration system	0
Model development for real oxygen delignification processes	0
February 2025	0
Reinforcing folding boxboard ply stock with refined pulp and its effect on dewatering potential	0
Effects of tissue additives on copy paper forming and properties	0
Combatting lime kiln ringing problems at the Arauco Constitución mill	0
Editorial: New coating grades require new tests: Barrier performance inside the package	0
Filtration performance of face masks and facepiece respirators used during COVID-19 pandemic	0
November 2023	0
The Shendye-Fleming OBA Index for paper and paperboard	0
August 2023	0
Using bleaching stage models for benchmarking softwood ECF bleach plants	0
Effects of metal surface morphology on deposition behavior of microstickies from papermaking white water	0
The Creep Properties of Paper	0
July 2024	0
Corrosion damage and in-service inspection of retractable sootblower lances in recovery boilers	0
Impact of different calendering strategies on barrier coating pickup	0
Effect of high sulfate content on viscosity of recovery boiler molten smelt	0
On the usage of online fiber measurements for predicting bleached eucalyptus kraft pulp tensile index — an industrial case	0
External fibrillation of wood pulp	0
Investigation of the cellulose-water relationship by the pressure plate method	0
An experimental method to study the absorption capacity of paper towels	0
Rewet suppression through press felt engineering	0
Improved barrier performance of water-based barrier coatings with microfibrillated cellulose	0
Z-directional testing of paperboard in combined tensile and compression loading	0
Editorial: Special issues in March and May TAPPI Journal focus on the latest pulp manufacture and engineering research	0
A fast and non-destructive alternative to the burnout method for paperboard quality inspections using phase-contrast X-ray imaging	0
Comparison of the application of polysaccharide-based barrier coatings on paper using film press and spray coating	0
Quantification of hardwood black liquor contamination in pine black liquor	0
June 2021	0
Edge crush testing methods and box compression modeling	0
Evaluation of soap recovery efficiency from black liquor - analytical tools	0
May 1952	0
Measurement and control of extensional viscosity in barrier coating dispersions	0
Online monitoring of the size distribution of lime nodules in a full-scale operated lime kiln using an in-situ laser triangulation camera	0
Predictive advisory solutions for chemistry management, control, and optimization	0
Mechanistic aspects of nanocellulose–cationic starch–colloidal silica systems for papermaking	0
Extension of a steady-state chlorine dioxide brightening model for Z-ECF bleaching of softwood kraft pulps	0

September 2024	0
The use of minerals in fiber-based packaging and pulp molding	0
Multifunctional barrier coating systems created by multilayer curtain coating	0
Effects of agitator blade scaling on mixing in dissolving tanks	0
Can carbon capture be a new revenue opportunity for the pulp and paper sector?	0
New opportunities in the paper and nonwovens industries with foam-assisted web forming and chemical application	0
Editorial: The emergence of AI in additives development	0
Development of reinforced paper and mitigation of the challenges of raw material availability by utilizing Areca nut leaf	0
Effects of hydrodynamic shear during formation of paper sheets with the addition of nanofibrillated cellulose, cationic starch, and cationic retention aid	0
Evaluation of folding effects on coating damage	0
Controllable conversion of cellulose nanocrystals to cellulose microspheres: Insight on the effect of parameters during spray drying	0
Feburary 1956	0
Effects of different parameters on the morphology of electrospun cellulose acetate/polyaniline nanocomposite	0
Continuous digester process safety improvements – Stress corrosion cracking and overpressure protection lessons learned and opportunities	0
Black liquor evaporators upgrade - How many effects?	0
Novel test method for measuring defects in barrier coatings	0
Research on improving the basis weight measurement accuracy of tissue paper based on PSO-BP neural network	0
Effectiveness of masks in the suppression of COVID-19 cases during the ongoing pandemic in India	0
January 2024	0
Development of paper quality parameter measurement in China	0
Web instability in the open draw and the impact on paper machine efficiency	0
The influence of precoating layers on the performance of water-based barrier coatings	0
Improving monochloramine performance with innovative sensor-controlled dosing	0
Editorial: Special coating issue contains highlighted works from TAPPICon 2023	0
Water chemistry challenges in pulping and papermaking – fundamentals and practical insights: Part 2: Conductivity, charge, and hardness	0
Assessing variation in package modeling	0
April 2024	0
Editorial: The innovation engine and the forest products industry value chain	0
April 2023	0
Enhancing tissue wet pressing performance and dry end material efficiency for cost savings	0
Non-process elements in the recovery cycle of six Finnish kraft pulp mills	0
Effect of xylan on the mechanical performance of softwood kraft pulp 2D papers and 3D foams	0
Celebrating an industry giant: Dr. Peter W. Hart	0
Editorial: TAPPI Journal Best Research Paper for 2023 focuses on black liquor concentration using graphene oxide membranes	0
Flow rheology of light foams generated from aqueous solutions of polyvinyl alcohol	0
Editorial: Transform presentations to TAPPI Journal research papers by following basic steps	0
February 2024	0
Value creation by converting pulp mill flue gas streams to green fuels	0
Effects of orders of addition in nanocellulose–cationic starch– colloidal silica systems for papermaking	0
Editorial: TAPPI Journal welcomes four new editorial board members	0
Experimental study and prediction of two-phase flow pattern distribution diagrams in multi-channel cylinder dryer	0
Editorial: Concentrated content: TAPPI Journal special issues create research visibility	0
The chemistry of aluminum salts in papermaking	0
October 2022	0
Editorial: Fundamental understanding enables new coating opportunities	0
Control of malodorous gases emission from wet-end white water with hydrogen peroxide	0
Application of AI-based approach to control the papermaking process	0
June 2023	0
Surface energy considerations for offset printing of coated paper and paperboard	0
February 2023	0
August 2021	0
Editorial: A roadmap for future papermakers: Dr. Peter W. Hart’s TAPPI Journal contributions	0
June 2024	0
Comparative analysis and benchmarking of commercial and emerging fast pyrolysis technologies	0
Peracetate/singlet oxygen chemistry used in post-bleaching of kraft pulp as a practical oxidant for paper machines	0
Orifice geometry as a tool for evaluating extensional flow resistance of barrier coating colors	0
A study of softness standard samples using a tissue softness analyzer and hand-felt panels	0
Life cycle carbon analysis of packaging products containing nonwood residues: A case study on linerboard and corrugating medium	0
Kraft recovery boiler operation with splash plate and/or beer can nozzles — a case study	0
October 2024	0
Black liquor evaporator upgrades— life cycle cost analysis	0
November 2022	0
November 2024	0
An analytical method to quantitatively determine the amount of polyamide epichlorohydrin (PAE) in paperboard and white water	0
Numerical investigation of the effect of ultrasound on paper drying	0
March 2022	0
Chemical addition to wet webs using foam application	0
Water-based adhesive penetration into paperboard and coated paperboard	0
October 2021	0
Rice straw-based sustainable food packaging material with improved strength and barrier properties: Development and characterization	0
New learnings and strategies for meeting future recovery boiler particulate emission limits with existing electrostatic precipitators	0
January 2025	0
July 2022	0
April 2021	0
Utilization of Areca leaf residues for sustainable production of greyboard	0
Effects of varying total titratable alkali and causticizing efficiency targets on kraft pulp mill productivity	0
March 2023	0
May 2024	0
Surface modification of TiO2 with MPS and its effects on the wettability and physical properties of Kawayan Kiling (Bambusa vulgaris Schrad ex. Wendl) handsheets	0
Cross-flow separation characteristics and piloting of graphene oxide nanofiltration membrane sheets and tubes for kraft black liquor concentration	0
Continuous digester rapid thinning	0
Evaluation of rice straw for purification of lovastatin	0
Biofuels in lime kilns – Operating experience in the Nordic pulp and paper industry	0
Effect of fly ash-based calcium silicate on physical properties of cardboard paper	0
Life cycle carbon analysis of packaging products containing purposely grown nonwood fibers: A case study on the use of switchgrass pulp for linerboard and corrugating medium	0
Alkyl ketene dimer (AKD) sized paper reversion due to oxidative photodegradation	0
Evaporation of process water from recycled containerboard mills	0
Application of fuzzy TOPSIS in the Analyze phase of the DMAIC cycle to aid decision-making	0
Understanding alkenyl succinic anhydride (ASA) size reversion due to autooxidation	0
Evaluating the effect of recovery boiler operation of green liquor dregs concentration using multivariate analysis	0
Advanced real-time digital microscopy of foaming processes	0
Economic and competitive potential of lignin-based thermoplastics using a multicriteria decision-making method	0
Effects of phosphogypsum whiskers modification with calcium stearate and their impacts on properties of bleached softwood paper sheets	0
Effects of rings on flow and temperature in lime kilns	0
Editorial: Investing in the future: Writing and peer-reviewing for TAPPI Journal, TAPPI Journal July 2024	0