Waste Management & Research

Papers
(The TQCC of Waste Management & Research is 9. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Can the human coronavirus epidemic also spread through solid waste?90
Management of used personal protective equipment and wastes related to COVID-19 in South Korea82
Application of machine learning algorithms in municipal solid waste management: A mini review72
A sustainable medical waste collection and transportation model for pandemics62
Clinical waste management under COVID-19 scenario in Malaysia61
Sustainable waste management of medical waste in African developing countries: A narrative review54
SARS-CoV-2 pandemic-induced PPE and single-use plastic waste generation scenario50
A comparative life cycle assessment on lithium-ion battery: Case study on electric vehicle battery in China considering battery evolution48
Towards circular economy in the textiles and clothing value chain through blockchain technology and IoT: A review45
Urban strategies evaluation for waste management in coastal areas in the framework of area metabolism44
Application of artificial intelligence neural network modeling to predict the generation of domestic, commercial and construction wastes44
Management of plastic waste: A bibliometric mapping and analysis43
Characterisation and composition identification of waste-derived fuels obtained from municipal solid waste using thermogravimetry: A review40
Strategic overview of management of future solar photovoltaic panel waste generation in the Indian context39
Review on the photonic techniques suitable for automatic monitoring of the composition of multi-materials wastes in view of their posterior recycling37
Analysis of medical waste management and impact analysis of COVID-19 on its generation in Taiwan34
A mini review of construction and demolition waste management in India33
Application of artificial neural networks for predicting the physical composition of municipal solid waste: An assessment of the impact of seasonal variation33
Influencing household-level waste-sorting and composting behaviour: What works? A systematic review (1995–2020) of waste management interventions33
Clean construction and demolition waste material cycles through optimised pre-demolition waste audit documentation: A review on building material assessment tools32
Material selection in design for deconstruction using Kano model, fuzzy-AHP and TOPSIS methodology31
Nanofiltration applied to the landfill leachate treatment and preliminary cost estimation31
Metals smelting-collection method for recycling of platinum group metals from waste catalysts: A mini review30
Towards the circular economy: Analysis of barriers to implementation of Turkey’s zero waste management using the fuzzy DEMATEL method30
Global municipal solid waste infrastructure: Delivery and forecast of uncontrolled disposal29
Applying the extended producer responsibility towards plastic waste in Asian developing countries for reducing marine plastic debris28
Application of a geographic information system-based fuzzy analytic hierarchy process model to locate potential municipal solid waste incineration plant sites: A case study of Izmir Metropolitan Munic28
Construction and demolition waste management in Australia: A mini-review27
Investigating the effect of government subsidies on end-of-life vehicle recycling26
Black soldier fly, Hermetia illucens as a potential innovative and environmentally friendly tool for organic waste management: A mini-review26
Environment-friendly technology for recovering cathode materials from spent lithium iron phosphate batteries26
Impact of COVID-19 pandemic on medical waste management in Lebanon26
Quantification of landfill gas generation and renewable energy potential in arid countries: Case study of Bahrain25
Considerations, benefits and unintended consequences of banning plastic shopping bags for environmental sustainability: A systematic literature review24
Quality assurance in reverse logistics supply chain of demolition waste: A systematic literature review24
The contamination of inland waters by microplastic fibres under different anthropogenic pressure: Preliminary study in Central Europe (Poland)24
Microplastic contamination in a conventional wastewater treatment plant in Thailand24
Utilization of waste glass in the improvement of concrete performance: A mini review23
Cuckoo optimization algorithm in reverse logistics: A network design for COVID-19 waste management23
Quantification and characterization of the municipal solid waste for sustainable waste management in newly formed municipalities of Nepal22
Nanoparticles impact in biomedical waste management22
Cost estimation of landfill leachate treatment by reverse osmosis in a Brazilian landfill22
Thermal delamination of end-of-life crystalline silicon photovoltaic modules22
Chemical recycling: A critical assessment of potential process approaches21
Impact of utilizing solid recovered fuel on the global warming potential of cement production and waste management system: A life cycle assessment approach21
Comparative performance analysis of support vector regression and artificial neural network for prediction of municipal solid waste generation21
Application of material flow analysis for the assessment of current municipal solid waste management in Karachi, Pakistan21
Application of artificial intelligence to enhance collection of E-waste: A potential solution for household WEEE collection and segregation in India20
Environmental assessment of amending the Amager Bakke incineration plant in Copenhagen with carbon capture and storage20
Thermo-catalytic pyrolysis of polystyrene in batch and semi-batch reactors: A comparative study20
A review on membrane concentrate management from landfill leachate treatment plants: The relevance of resource recovery to close the leachate treatment loop20
Reverse supply chain conceptual model for construction and demolition waste20
Scaling up resource recovery of plastics in the emergent circular economy to prevent plastic pollution: Assessment of risks to health and safety in the Global South20
Diverting demolition waste toward secondary markets through integrated reverse logistics supply chains: A systematic literature review20
Steps forward to adopt a circular economy strategy by the tourism industry20
Formal and informal waste selective collection in developing megacities: Analysis of residents’ involvement in Bolivia19
Towards clean material cycles: Is there a policy conflict between circular economy and non-toxic environment?19
Estimation of COVID-19 waste generation and composition in Vietnam for pandemic management19
Waste management and environmental impact of absorbent hygiene products: A review19
Healthcare waste management in Ghanaian hospitals: Associated public health and environmental challenges19
Alkali-activated slag concrete with paper industry waste19
Characterization of pond ash-bentonite mixes as landfill liner material18
SWAN platform: A web-based tool to support the development of industrial solid waste reuse business models18
E-waste recycling intention paradigm of small and medium electronics store managers in Bangladesh: An S–O–R perspective18
Waste collection routing problem: A mini-review of recent heuristic approaches and applications18
Approaching a zero-waste strategy by reuse in New York City: Challenges and potential17
Sustainability assessment of healthcare waste treatment systems using surrogate weights and PROMETHEE method17
Socio-economic impacts of the COVID-19 pandemic on waste bank closed-loop system in Surabaya, Indonesia17
The perception of circular economy in the framework of fashion industry17
Municipal solid waste transfer station planning through vehicle routing problem-based scenario analysis17
The nine development bands: A conceptual framework and global theory for waste and development17
Global study on slope instability modes based on 62 municipal solid waste landfills17
Household plastic waste habits and attitudes: A pilot study in the city of Valencia17
Discharge of lithium-ion batteries in salt solutions for safer storage, transport, and resource recovery17
Healthcare waste management assessment: Challenges for hospitals in COVID-19 pandemic times16
Enzymatic textile recycling – best practices and outlook16
The impact of pyrolysis conditions on orange peel biochar physicochemical properties for sandy soil16
Opportunities, challenges and trade-offs with decreasing avoidable food waste in the UK16
Briquetting of sugarcane bagasse as a proper waste management technology in Vietnam16
Environmental assessment of construction and demolition waste recycling in Bolivia: Focus on transportation distances and selective collection rates16
Coconut shell and husk biochar: A review of production and activation technology, economic, financial aspect and application16
Refuse-derived fuel potential production for co-combustion in the cement industry in Algeria16
Digitalization of waste management: Insights from German private and public waste management firms16
Data mining and knowledge discovery in databases for urban solid waste management: A scientific literature review16
In search of the optimal inoculum to substrate ratio during anaerobic co-digestion of spent coffee grounds and cow manure15
A model to rapidly assess informal electronic waste systems15
Statistical modelling and assessment of landfill leachate emission from fresh municipal solid waste: A laboratory-scale anaerobic landfill simulation reactor study15
Re-assessing global municipal solid waste generation15
A mini-review on household solid waste management systems in low-income developing countries: A case study of urban Harare City, Zimbabwe15
Low-cost biodiesel production using waste oil and catalyst15
Assessment of bio-medical waste before and during the emergency of novel Coronavirus disease pandemic in India: A gap analysis15
Ammonia inhibition of waste degradation in landfills – A possible consequence of leachate recirculation in arid climates15
Plastic waste: Challenges and opportunities14
Household food waste in rural China: A noteworthy reality and a systematic analysis14
Waste to energy incineration technology: Recent development under climate change scenarios14
Circular solar: Evaluating the profitability of a photovoltaic panel recycling plant14
Physicochemical and FTIR spectroscopic analysis of fine fraction from a municipal solid waste dumpsite for potential reclamation of materials14
A mini-review of the physical recycling methods for plastic parts in end-of-life vehicles14
Assessment of urban solid waste management systems for Industry 4.0 technology interventions and the circular economy13
Effect of gas pressure on municipal solid waste landfill slope stability13
Low-temperature thermal pretreatment process for recycling inner core of spent lithium iron phosphate batteries13
Study on the biogas potential of anaerobic digestion of coffee husks wastes in Ethiopia13
The Zero Waste utopia and the role of waste-to-energy13
Characterization and projection of dry season municipal solid waste for energy production in Ilorin metropolis, Nigeria12
Recycling of electrode materials from spent lithium-ion power batteries via thermal and mechanical treatments12
What drives WEEE recycling? A comparative study concerning legislation, collection and recycling12
Municipal solid waste landfill: Evidence of the effect of applied landfill management on vegetation composition12
Effect of elevated temperature on solid waste shear strength and landfill slope stability12
Sustainable waste management solutions for the foodservice industry: A Delphi study12
Modelling the effects of particle size pretreatment method on biogas yield of groundnut shells12
Reverse logistics network design for waste solar photovoltaic panels: A case study of New South Wales councils in Australia12
The dynamic interaction between circular economy and the environment: Evidence on EU countries12
Sustainable landfill leachate treatment12
Analysis of plastic waste reduction and recycling in Taiwan12
A mini-review of heavy metal recycling technologies for municipal solid waste incineration fly ash12
Studies on leaching characteristics of electronic waste for metal recovery using inorganic and organic acids and base12
Mapping and visualizing of research output on waste management and green technology: A bibliometric review of literature12
Influences of bioplastic polylactic acid on near-infrared-based sorting of conventional plastic12
Estimation of end-of-life electric vehicle generation and analysis of the status and prospects of power battery recycling in China12
Sorting efficiency in mechanical sorting of construction and demolition waste12
Organic chemical devulcanization of rubber vulcanizates in supercritical carbon dioxide and associated less eco-unfriendly approaches: A review12
Life cycle assessment on automotive bumper: Scenario analysis based on End-of-Life vehicle recycling system in Japan11
End-of-waste criteria in the framework of end-of-life PV panels concerning circular economy strategy11
Sustainable alternatives for by-products derived from industrial mussel processing: A critical review11
Construction and demolition wastes in Beijing: Where they come from and where they go?11
Dynamic routing for waste collection and transportation with multi-compartment electric vehicle using smart waste bins11
A critical review of household recycling barriers in the United Kingdom11
Transboundary movement of waste review: From binary towards a contextual framing11
Characterisation and material flow analysis of end-of-life portable batteries and lithium-based batteries in different waste streams in Austria11
Global material flow analysis of end-of-life of lithium nickel manganese cobalt oxide batteries from battery electric vehicles11
Evaluating the electric vehicle popularization trend in China after 2020 and its challenges in the recycling industry11
A mini-review of biomethane valorization: Managerial and policy implications for a circular resource11
Reverse logistics models for the collection of plastic waste: A literature review11
Indicators and ICTs application for municipal waste management11
Predictors of waste sorting and recycling behavioural intention among youths: Evidence from Shenzhen, China and Turku, Finland11
Sustainability indicators for municipal solid waste management: A case study of the Recife Metropolitan Region, Brazil11
A mini-review of end-of-life management of wind turbines: Current practices and closing the circular economy gap10
United Nations’ plastic pollution treaty pathway puts waste and resources management sector at the centre of massive change10
Do we need landfills?10
An effective separation process of arsenic, lead, and zinc from high arsenic-containing copper smelting ashes by alkali leaching followed by sulfide precipitation10
Construction waste landfill volume estimation using ground penetrating radar10
Circular economy approach for sustainable solid waste management: A developing economy perspective10
Plastic pollution global treaty to cover waste pickers and open burning?10
A case study on establishing the state of decomposition of municipal solid waste in a bioreactor landfill in India10
The use of calcium sulfo-aluminate cement as an alternative to Portland Cement for the recycling of municipal solid waste incineration bottom ash in mortar10
Restructuring municipal solid waste management and governance in Hong Kong: Options and prospects10
Wet compounding with pyrolytic carbon black from waste tyre for manufacture of new tyre – A mini review10
Adoption of circular economy for food waste management in the context of a developing country10
A review of advances in valorization and post-treatment of anaerobic digestion liquid fraction effluent10
Efficient supervision strategy for illegal dumping of construction and demolition waste: A networked game theory decision-making model10
Tariff determination for municipal waste management power projects in Pakistan10
Co-processing of industrial trade rejects in cement plant10
A highly efficient multi-step methodology for the quantification of micro-(bio)plastics in sludge10
New approach for selecting a suitable recycling collection program for recovered paper and pulp recyclables using AHP-TOPSIS techniques10
Sanitary landfill site selection using multi-criteria decision analysis and analytical hierarchy process: A case study in Azuay province, Ecuador10
A comparison of fuzzy logic and TOPSIS methods for landfill site selection according to field visits, engineering geology approach and geotechnical experiments (case study: Rudbar County, Iran)10
Granulated biofuel ash as a sustainable source of plant nutrients10
Comparison of end-of-life vehicles management in 31 European countries: A LMDI analysis10
Production of high-performance lead(II) ions adsorbents from pea peels waste as a sustainable resource10
Experimental study on the washing characteristics of fly ash from municipal solid waste incineration10
Augmentation of farmers’ income in India through sustainable waste management techniques9
Evaluation of sustainable e-waste collection method for urban and rural region of India9
Assessing knowledge, attitude, and practice of healthcare personnel regarding biomedical waste management: a systematic review of available tools9
Identifying effective institutions for China’s circular economy: Bottom-up evidence from waste management9
Use of polypropylene pyrolysis oil in alternative fuel production9
Application of life cycle assessment for municipal solid waste management options in Hohhot, People’s Republic of China9
Impact of volatile fatty acids to alkalinity ratio and volatile solids on biogas production under thermophilic conditions9
Quantitative analysis of residential plastic recycling in New York City9
Waste metrics in the framework of circular economy9
Evaluation of the biogas potential of agricultural biomass waste for energy applications in Greece: A case study of the western Greece region9
Impacts of non-oxidative torrefaction conditions on the fuel properties of indigenous biomass (bagasse)9
Process simulation and comprehensive evaluation of a system of coal power plant coupled with waste incineration9
Recent evolution of the informal recycling sector in Argentina within the ‘popular economy’: Measuring its impact through a case study in Tandil (Buenos Aires)9
Environmental impact assessment of organic fraction of municipal solid waste treatment by anaerobic digestion in Sri Lanka9
Examining challenges and multi-strategic approaches in waste management during the COVID-19 pandemic: A systematic review9
A review on waste management and compost production in the Middle East–North Africa region9
Study on the process of harmless treatment of residual electrolyte in battery disassembly9
Clean environment index: A new approach for litter assessment9
0.069058895111084