International Journal of Plasticity

Article	Citations
Editorial Board	153
An efficient and minimalist scheme for continuum dislocation dynamics	137
Editorial Board	125
Editorial Board	120
A continuum model for dislocation climb	111
Editorial Board	105
Editorial Board	96
Strain-rate and temperature dependent optimum precipitation sizes for strengthening in medium-entropy alloys	90
Enhancing fatigue life of low-carbon ultra-high strength steel by inducing multi-component precipitates	88
Unified prediction of uniaxial ratcheting deformation at elevated temperatures with physics-informed multimodal network	86
A crystal plasticity-damage coupled finite element framework for predicting mechanical behavior and ductility limits of thin metal sheets	82
Effect of vanadium microalloying on the deformation behavior and strain hardening of a medium Mn steel	79
Multi-scale modelling of rafting behaviour under complex stress states for Ni3Al superalloys	78
Strengthening and toughening of Cu matrix composites reinforced by metallic glass particles with variable size	78
Defect interaction summary between edge dislocations and <112>-axis symmetric tilt grain boundaries in copper on activation barriers and critical stresses	78
Orientation-dependent deformation mechanisms of alpha-uranium single crystals under shock compression	78
Two laser beam modulation of microstructure and residual stress field in cold sprayed Al alloy for recovering fatigue performance	77
Heterogeneous metallic glass composites with a unique combination of strength, plasticity and conductivity	74
A non-local methodology for geometrically necessary dislocations and application to crack tips	73
Evolution of recrystallization texture in medium to low stacking fault energy alloys: Experiments and simulations	72
Abnormal hardening and amorphization in an FCC high entropy alloy under extreme uniaxial tension	72
New deformation mechanism and strength-ductility synergy in pure titanium with high density twin	71
A temporal graph neural network for cross-scale modelling of polycrystals considering microstructure interaction	70
Atomic irradiation defects induced hardening model in irradiated tungsten based on molecular dynamics and CPFEM	70
Computational modelling of poro-visco-hyperelastic effects on time-dependent fatigue crack growth of hydrogels	69

On multiaxial creep–fatigue considering the non-proportional loading effect: Constitutive modeling, deformation mechanism, and life prediction	67
Coupled cellular automata-crystal plasticity modeling of microstructure-sensitive damage and fracture behaviors in deformation of α-titanium sheets affected by grain size	67
Exploring structural origins responsible for the exceptional mechanical property of additively manufactured 316L stainless steel via in-situ and comparative investigations	66
A robust and efficient hybrid solver for crystal plasticity	66
Wavy interface enables extra strengthening in an additively manufactured high-entropy alloy with Mortise-Tenon architecture	65
Fatigue-resistant design in low-cycle regime by regulating the micro-structural gradient in a TWIP steel: Modelling and experiment	64
Lithium concentration and atomic chain bridging induced strength–ductility synergy in amorphous lithiated sulfur cathodes	64
A scheme for achieving strength-ductility trade-off in metallic glasses	63
A multiscale investigation on the preferential deformation mechanism of coarse grains in the mixed-grain structure of 316LN steel	62
Mesoscopic unit cell analysis of ductile failure under plane stress conditions	62
Interaction between basal edge/mixed <a> dislocations and point defects in zirconium	62
Editorial Board	61
Relating stress/strain heterogeneity to lath martensite strength by experiments and dislocation density-based crystal plasticity	60
Deep active learning for constitutive modelling of granular materials: From representative volume elements to implicit finite element modelling	60
Modeling shock-induced void collapse in single-crystal Ta systems at the mesoscales	60
Modeling and numerical simulation of thermo-electro-mechanical coupling behaviors of liquid crystal elastomers	59
An extended gradient damage model for anisotropic fracture	58
Experimental and modelling assessment of ductility in a precipitation hardening AlMgScZr alloy	58
A generalised framework for modelling anisotropic creep-ageing deformation and strength evolution of 2xxx aluminium alloys	57
3D microstructure-based modelling of ductile damage at large plastic strains in an aluminum sheet	57
Editorial Board	57
Intrinsic characteristics of grain boundary elimination induced by plastic deformation in front of intergranular microcracks in bcc iron	57
Developing parametrically upscaled constitutive and crack nucleation models for the	56
Multiscale computational analysis of crack initiation at the grain boundaries in hydrogen-charged bi-crystalline alpha-iron	56
A ductile fracture criterion under warm-working conditions based on the multiscale model combining molecular dynamics with finite element methods	55
Improved creep behaviour for a high strength Al-Li alloy in creep age forming: Experimental studies and constitutive modelling	55
Assessment of the time-dependent behavior of dislocation multiplication under shock loading	54
A Combined Atomistic-Continuum Study on the Unfaulting of Single and Multi-layer Interstitial Dislocation Loops in Irradiated FCC and HCP Metals	54
An insight into size effect on fracture behavior of Inconel 718 cross-scaled foils	54
Microstructural factors governing the significant strengthening of Al/Al2Cu mille-feuille structured alloys accompanied by kink-band formation	53
Rate controlling deformation mechanisms in SS316L stainless steel manufactured using laser powder bed fusion technique	53
Temperature-dependent reversed fracture behavior of multilayered TiBw/Ti–Ti(Al) composites	53
Damage-coupled unified constitutive modeling of 316LN stainless steel including dynamic strain aging under various tension dwell time: A macroscopic phenomenological study	52
The mechanism for Li-addition induced homogeneous deformation in Mg-4.5wt.% Li alloy	52
Thermo-mechanically coupled gradient-extended damage-plasticity modeling of metallic materials at finite strains	52
Modelling of ultrasonic vibration-assisted forming considering the distribution of ultrasonic field with structure deformation	52
Modelling the influence of fines content on the instability of silty sands considering grain scale interactions	51
A cohesive viscoelastic-elastoplastic-damage model for DEM and its applications to predict the rate- and time-dependent behaviour of asphalt concretes	51
Effects of interdiffusion on shear response of semi-coherent {111} interfaces in Ni/Cu	51
Nucleation and growth of {101<	51
A novel elastic–plastic damage model for rock materials considering micro-structural degradation due to cyclic fatigue	50
Ductility limit prediction for polycrystalline aggregates using a CPFEM-based multiscale framework	50
Microstructure-based multiscale and heterogeneous elasto-plastic properties of 2205 duplex stainless steel welded joints: Experimental and modeling	50
Atomic structure, stability, and dissociation of dislocations in cadmium telluride	50
Thermodynamic modeling framework with experimental investigation of the large-scale bonded area and local void in Cu-Cu bonding interface for advanced semiconductor packaging	49
Estimation of elastic properties and failure strength of layered rocks with a multi-scale damage approach	49
Achieving excellent uniform tensile ductility and strength in dislocation-cell-structured high-entropy alloys	49
Laser powder bed fused 304L steel shot-peened with various ceramic shot sizes: Surface/subsurface characteristics, tensile behavior, and fatigue behavior	49
Effect of Nb solutes on the Kolbe mechanism for microtwinning in Ni-based superalloys	49
Parameter identification for the non-associated flow rules representing corner effects through the equivalent tangential shear modulus reduction after abrupt strain-path change	49

Atomistic analysis of the mechanisms underlying irradiation-hardening in Fe–Ni–Cr alloys	48
Interpretation of the stress dip test as a means of characterizing backstress: Experiments and backstress-aided crystal plasticity modeling of polycrystalline tantalum	48
Mechanistic insights into twinning and detwinning during fatigue short crack growth in zirconium alloys	48
Discerning the duality of H in Mg: H-induced damage and ductility	48
Monotonic tensile and cyclic deformation of a Ni-based single crystal superalloy with anisotropic microstructural rafting patterns at high temperature: Experiment and constitutive modelling	48
Unveiling the orientation sensitivity of creep life in near [001] oriented Ni-based single crystal superalloys at intermediate temperatures	47
An experimental study of the mechanical behavior of rolled AZ31B magnesium alloy under combined axial-torsion loading	47
Elastoplastic transition in a metastable β-Titanium alloy, Timetal-18 – An in-situ synchrotron X-ray diffraction study	47
Modelling stress relaxation after hot deformation: Microstructure-property relationships in Nb-bearing steels	46
Tensile and compressive plastic deformation behavior of medium-entropy Cr-Co-Ni single crystals from cryogenic to elevated temperatures	46
Experimental and numerical investigations of plastic strain mechanisms of AISI 316L alloys with bimodal grain size distribution	46
Modeling the non-Schmid crystallographic slip in MAX phases	46
Micromechanical properties and deformation behavior of the constituent phases in 3rd generation complex phase AHSS: In-situ neutron experiment and crystal plasticity simulation	46
The interactions of deformation twins, zirconium hydrides, and microcracks	45
In-situ neutron diffraction study of the strengthening mechanism and deformation behavior of cellular structure in high-entropy alloys by additive manufacturing	45
A 3D finite deformation constitutive model for anisotropic shape memory polymer composites integrating viscoelasticity and phase transition concept	45
Key role of plastic strain gradient in hydrogen transport in polycrystalline materials	44
Micromechanical crystal plasticity back stress evolution within FCC dislocation substructure	44
A comprehensive study of the anisotropic tensile properties of laser additive manufactured Ni-based superalloy after heat treatment	44
The influence of shearable and nonshearable precipitates on the Portevin-Le Chatelier behavior in precipitation hardening AlMgScZr alloys	44
Effect of hydrogen accumulation on θ' precipitates on the shear strength of Al-Cu alloys	44
Role of particles and lattice rotation in tension–compression asymmetry of aluminium alloys	44
Modelling and physical analysis of the high-temperature rheological behavior of a metallic glass	44
Atomic-scale study of the {112¯	43
Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel	43
An additively manufactured and direct-aged AlSi3.5Mg2.5 alloy with superior strength and ductility: micromechanical mechanisms	42
Understanding the effect of refractory metal chemistry on the stacking fault energy and mechanical property of Cantor-based multi-principal element alloys	42
Development of microstructure-sensitive damage models for zirconium polycrystals	42
Revealing the influential mechanism of strain ranges on cyclic-life saturation during creep-fatigue in Nickel-based superalloy DZ445	42
A microstructure-based porous crystal plasticity FE model for additively manufactured Ti-6Al-4V alloys	42
Role of low-level void swelling on plasticity and failure in a 33 dpa neutron-irradiated 304 stainless steel	42
On the origin of the strain hardening mechanisms of Ni20Cr alloy manufactured by laser powder bed fusion	42
Martensitic transformation induced planar deformation of AlN nanoprecipitates in high nitrogen stainless steels	42
Atomistic simulation of the shock wave in copper single crystals with pre-existing dislocation network	42
High-temperature “Inverse” Hall-Petch relationship and fracture behavior of TA15 alloy	42
On the effects of texture and microstructure on hydrogen transport towards notch tips: A CPFE study	41
Lode-dependent second porosity in porous plasticity for shear-dominated loadings	41
A critical dislocation velocity for serration mechanism transition in a nickel-chromium solid solution alloy	41
Anisotropic distortional hardening based on deviatoric stress invariants under non-associated flow rule	41
Lode-dependent anisotropic-asymmetric yield function for isotropic and anisotropic hardening of pressure-insensitive materials. Part I: Quadratic function under non-associated flow rule	41
Multiscale stress and strain statistics in the deformation of polycrystalline alloys	41
A stochastic discrete slip approach to microplasticity: Application to submicron W pillars	41
Two-dimensional evolution of temperature and deformation fields during dynamic shear banding: In-situ experiments and modeling	41
Machine learning-driven stress integration method for anisotropic plasticity in sheet metal forming	40
Multi-scale damage mechanism of hierarchically structured high-strength martensitic steels under shock loading	40
Achieving strength and ductility synergy via a nanoscale superlattice precipitate in a cast Mg-Y-Zn-Er alloy	40
Microstructural causes and mechanisms of crack growth rate transition and fluctuation of additively manufactured titanium alloy	40
Experimental and numerical investigation of differential hardening of cold rolled steel sheet under non-proportional loading using biaxial tensile test	40
Mechanical anisotropy induced by the competition between twinning and basal slip of AZ31 magnesium alloy under biaxial tension	40
Modelling dynamic recrystallisation in magnesium alloy AZ31	40
High pressure-induced elimination of grain size softening in nanocrystalline metals: Grain boundary strengthening overwhelming reduction of intragranular dislocation storage ability	40
Role of <a> and <c+a> dislocations on the room-temperature grain boundary migration in a deformed Mg alloy	40
Temperature-dependent damage of magnesium alloy with ratchetting–fatigue interaction effects: Experiments and mesomechanical theory	40
Role of stress-induced martensite on damage behavior in a metastable titanium alloy	39
Modeling of creep in nickel-based superalloy based on microtwinning mechanism	38
A unified amorphous–crystalline viscoplastic hardening law for non-isothermal modelling of thermoplastics and thermosets	38
Crystal grain size effects and crystallinity dynamics during supersonic particle impacts	38
A rational multiscale nonlinear constitutive model for freeze–thaw rocks under triaxial compression	38
Microstructural insights into fatigue short crack propagation resistance and rate fluctuation in a Ni-based superalloy manufactured by laser powder bed fusion	38
Heterogeneous phase deformation in a dual-phase tungsten alloy mediated by the tungsten/matrix interface: Insights from compression experiments and crystal plasticity modeling	38
Effect of printing direction and thickness on the mechanical behavior of SLM fabricated Hastelloy-X	38
A three-dimensional mechanistic study of the drivers of classical twin nucleation and variant selection in Mg alloys: A mesoscale modelling and experimental study	38
Hydride-enhanced strain localization in zirconium alloy: A study by crystal plasticity finite element method	37
On the coupling of damage and single crystal plasticity for ductile polycrystalline materials	37
Activating dispersed strain bands in tensioned nanostructure layer for high ductility: The effects of microstructure inhomogeneity	37
Creep anisotropy modeling and uncertainty quantification of an additively manufactured Ni-based superalloy	37
Dynamic crystal plasticity modeling of single crystal tantalum and validation using Taylor cylinder impact tests	37
Controllable selection of martensitic variant enables concurrent enhancement of strength and ductility in a low-carbon steel	37
A deep learning energy-based method for classical elastoplasticity	37
Strength-ductility synergy of an additively manufactured metastable high-entropy alloy achieved by transformation-induced plasticity strengthening	37
Deformation mechanisms of additively manufactured TiNbTaZrMo refractory high-entropy alloy: The role of cellular structure	37
Prominent role of multi-scale microstructural heterogeneities on superplastic deformation of a high solid solution Al–7Mg alloy	37
Prediction of shear strength of cluster-strengthened aluminum with multi-scale approach describing transition from cutting to bypass of precipitates by dislocations	37
Influences of the evolving plastic behavior of sheet metal on V-bending and springback analysis considering different stress states	37
Investigation of failure mechanisms in dual-phase steels through cohesive zone modeling and crystal plasticity frameworks	36
A new failure criterion for predicting meso/micro-scale forming limit of composite metal foils	36
Gurson-Cohesive modeling (GCM) for 3D ductile fracture simulation	36
A polycrystalline damage model applied to an anisotropic aluminum alloy 2198 under non-proportional load path changes	36
Enhancing strength and ductility of Al-matrix composite via a dual-heterostructure strategy	36
Exceptional strength-ductility synergy in the novel metastable FeCoCrNiVSi high-entropy alloys via tuning the grain size dependency of the transformation-induced plasticity effect	35

Counterexample-trained neural network model of rate and temperature dependent hardening with dynamic strain aging	35
Dynamic strain ageing in an AlMg alloy at different strain rates and temperatures: Experiments and constitutive modelling	35
Influence of grain size on strain-induced phase transformation in a CrCoNi multi-principal element alloy	35
Shear direction induced transition mechanism from grain boundary migration to sliding in a cylindrical copper bicrystal	35
Tuning generalized planar fault energies to enable deformation twinning in nanocrystalline aluminum alloys	35
Effect of Si on the evolution of plasticity mechanisms, grain refinement and hardness during high-pressure torsion of a non-equiatomic CoCrMnNi multi-principal element alloy	35
Influence of kinetic effect on interaction between edge dislocation and irradiated dislocation loops in BCC Tantalum	35
Effects of local strain on the plastic deformation and fracture mechanism of heterogeneous multilayered aluminum	34
Editorial Board	34
Heterostructure manipulation of Ti2AlNb alloy through directional induction heating: investigation of multi-scale deformation mechanisms in the O phase	34
Editorial Board	34
Editorial Board	34
Editorial Board	34
An anisotropic multi-scale method for slipping dislocations	34
Editorial Board	33
Rapid assessment of the creep rupture life of metals: A model enabling experimental design	33
Editorial Board	33
Evolution of microscopic strains, stresses, and dislocation density during in-situ tensile loading of additively manufactured AlSi10Mg alloy	33
Investigation of full-field strain evolution behavior of Cu/Ni clad foils by interpretable machine learning	33
A multi-scale formulation for polycrystalline materials accounting for cohesive micro-cracks: Homogenisation of the traction-separation law	33
The microstructural effects on the mechanical response of polycrystals: A comparative experimental-numerical study on conventionally and additively manufactured metallic materials	33
Bulging of grain boundaries and core-shell dislocation structures enhance mechanical properties of equiatomic high-entropy alloys	33
Editorial Board	33
Twinning induced by asymmetric shear response	32
Role of temperature and preexisting dislocation network on the shock compression of copper crystals	32
A geometrical model for grain boundary migration mediated formation of multifold twins	32
Role of grain boundary crystallography on void growth in FCC metals	32
Coupling of the phase field approach to the Armstrong-Frederick model for the simulation of ductile damage under cyclic load	32
Deformation mechanisms and texture evolution in high entropy alloy during cold rolling	32
Texture and lattice strain evolution in a pearlitic steel during shear deformation: An in situ synchrotron X-ray diffraction study	32
Improvement of work-hardening capability and strength of FeNiCoCr-based high-entropy alloys by modulation of stacking fault energy and precipitation phase	32
Unraveling dislocation mediated plasticity and strengthening in crack-resistant ZnAlMg coatings	32
Polycrystalline simulations of in-reactor deformation of recrystallized Zircaloy-4 tubes: Fast Fourier Transform computations and mean-field self-consistent model	32
Three-dimensional crystal plasticity simulations using peridynamics theory and experimental comparison	31
Effect of Strain Gradient on Elastic and Plastic Size Dependency in Polycrystalline Copper	31
Hierarchical deformation and anisotropic behavior of (α+β) Ti alloys: A microstructure-informed multiscale constitutive model study	31
Yield surface identification of CP-Ti and its evolution reflecting pre-deformation under complex loading	31
Multiscale modeling of discontinuous dynamic recrystallization during hot working by coupling multilevel cellular automaton and finite element method	31
Unraveling the self-annealing behavior of cryo-rolled Cu-Fe-P alloy sheets: Evidence and implications	31
Atomic-resolution investigations on dislocation-assisted evolution of {101¯<	31
Multi-element segregation strengthening and doping softening of Σ5 (210) [001] symmetrically tilted grain boundary in Ni-based bicrystal	31
Editorial Board	31
A unified model of anisotropy, thermoelasticity, inelasticity, phase transition and reaction for high-pressure ramp-loaded RDX single crystal	31
Reconstructing orientation data from the images of IPF maps and ODF sections extracted from the literature: A data-collection method for machine learning	31
Quantitative comparison between experiments and crystal plasticity simulations using microstructural clones	30
Modeling dynamic formability of porous ductile sheets subjected to biaxial stretching: Actual porosity versus homogenized porosity	30
Experimental investigation of early strain heterogeneities and localizations in polycrystalline 30
Discrete dislocation dynamics simulations of 〈a	30
Concentration of transformation-induced plasticity in pseudoelastic NiTi shape memory alloys: Insight from austenite–martensite interface instability	30
On the anisotropic coalescence of elliptic cylindrical voids considering the geometric and distributive properties	30
Predicting grain boundary damage by machine learning	30
A unified statistical model for indentation pop-in: Effects of indenter radius and microstructure density on the transition from homogeneous nucleation to heterogeneous nucleation to bulk plasticity	30
A macro-micro approach for identifying crystal plasticity parameters for necking and failure in nickel-based alloy haynes 282	29
Plastic deformation mechanisms that explain hot-rolling textures in Nickel–Titanium	29
The effect of hydro-mechanical coupling on the onset and orientation of localisation bands in partially saturated soils	29
Deciphering the multiple deformation mechanisms responsible for sustained work hardening in a FeCrCoNi medium entropy alloy	29
Plastic flow instability in austenitic stainless steels at room temperature: Macroscopic tests and microstructural analysis	29
Evolution of yield behavior for AA6016-T4 and DP490—Towards a systematic evaluation strategy for material models	29
The influence of mineral inclusion on the effective strength of rock-like geomaterials	29
A tangent finite-volume direct averaging micromechanics framework for elastoplastic porous materials: Theory and validation	29
Analytical description of an asymmetric yield function (Yoon2014) by considering anisotropic hardening under non-associated flow rule	29
Experimental analyses and numerical modeling of the microstructure evolution of aluminum alloy using an internal state variable plasticity-based approach coupled with the effects of second phase	29
Microcracking in additively manufactured tungsten: Experiment and a nano-micro-macro multiscale model	29
Dynamic deformation and fracture of brass: Experiments and dislocation-based model	29
The derivation of CRSS in pure Ti and Ti-Al alloys	29
Anisotropic plasticity and fracture of alpha titanium sheets from cryogenic to warm temperatures	29
The interface effect on crack nucleation under dwell fatigue loading in dual-phase Ti alloy	29
Editorial Board	29
Strengthening and ductilization of a refractory high-entropy alloy over a wide strain rate range by multiple heterostructures	28
Insights into orientation-dependent plasticity deformation of HfNbTaTiZr refractory high entropy alloy: An atomistic investigation	28
The roles of rise and fall time in load shedding and strain partitioning under the dwell fatigue of titanium alloys with different microstructures	28
Deformation twinning and detwinning in extruded Mg-4Al: In-situ experiment and crystal plasticity simulation	28
History and temperature dependent cyclic crystal plasticity model with material-invariant parameters	28
On adiabatic shear instability in impacts of micron-scale Al-6061 particles with sapphire and Al-6061 substrates	28
Dynamic precipitation and recrystallization behavior during hot deformation of Al-Zn-Mg-Cu alloy: Experiment and modeling	28
Yield criterion for intergranular void coalescence under combined tension and shear	28
A Hall-Petch-like relationship linking nanoscale heterogeneity to yield stress of heterogeneous metallic glasses	28
Quantifying dislocation drag at high strain rates with laser-induced Microprojectile impact	28
Overcoming the strength and ductility trade-off in Ni-based alloy through tailoring of bimodal grain structures, hierarchical twins and coherent nanoprecipitates	28
A hierarchically correlated flow defect model for metallic glass: Universal understanding of stress relaxation and creep	28
Plasticity in irradiated FeCrAl nanopillars investigated using discrete dislocation dynamics	28
A microdamage model for FCC single crystals considering a mixed failure mechanism of slip and cleavage	28
Strain delocalization in a gradient-structured high entropy alloy under uniaxial tensile loading	28
In-situ investigation of plasticity in a Ti-Al-V-Fe (α+β) alloy: Slip mechanisms, strain localization, and partitioning	28
Surface roughness evolution and heterogeneous plastic deformation of austenitic stainless steel during micro deep drawing: Modeling and experiment	27
Virtual laboratory enabled constitutive modelling of dual phase steels	27
A generalized, computationally versatile plasticity model framework - Part II: Theory and verification focusing on shear anisotropy	27
Experimental characterization and modeling of complex anisotropic hardening in quenching and partitioning (Q&P) steel subject to biaxial non-proportional loadings	27
Characterization of compressive fracture strain based on bilinear strain paths	27
Nanoprecipitate and stacking fault-induced high strength and ductility in a multiscale heterostructured high-entropy alloy	27
Effect of notch severity and crystallographic texture on local deformation and damage in commercially pure titanium	27
Enhancing work hardening through tuning TRIP by nano-precipitates in maraging stainless steels	27
A steady-state irradiation creep and thermal creep model for zirconium alloys	26
Understanding the strain localization in additively manufactured materials: Micro-scale tensile tests and crystal plasticity modeling	26
A constitutive model for metallic glasses based on two-temperature nonequilibrium thermodynamics	26