OOIR: Observatory of International Research

Papers

(The TQCC of Journal of Biomaterials Applications is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-05-01 to 2024-05-01.)

Article	Citations
Biomedical applications of tannic acid	52
RGD peptide-mediated liposomal curcumin targeted delivery to breast cancer cells	47
Electrospinning of bioactive polycaprolactone-gelatin nanofibres with increased pore size for cartilage tissue engineering applications	44
Effects of different sulfonation times and post-treatment methods on the characterization and cytocompatibility of sulfonated PEEK	36
Intercalation of curcumin into liposomal chemotherapeutic agent augments apoptosis in breast cancer cells	32
Application of rare earth-doped nanoparticles in biological imaging and tumor treatment	27
Fabrication of piezoelectric porous BaTiO₃ scaffold to repair large segmental bone defect in sheep	26
Alginate/cartilage extracellular matrix-based injectable interpenetrating polymer network hydrogel for cartilage tissue engineering	25
Biodegradable engineered fiber scaffolds fabricated by electrospinning for periodontal tissue regeneration	24
3D printable Sodium alginate-Matrigel (SA-MA) hydrogel facilitated ectomesenchymal stem cells (EMSCs) neuron differentiation	22
Wet-electrospun PHBV nanofiber reinforced carboxymethyl chitosan-silk hydrogel composite scaffolds for articular cartilage repair	22
Fabrication of sliver nanoparticles/polyvinyl alcohol/gelatin ternary nanofiber mats for wound healing application	22
Conjugating heparin, Arg–Glu–Asp–Val peptide, and anti-CD34 to the silanic Mg–Zn–Y–Nd alloy for better endothelialization	22
Bone marrow-derived mesenchymal stem cells and extracellular vesicles enriched collagen chitosan scaffold in skin wound healing (a rat model)	21
The eggshell membrane: A potential biomaterial for corneal wound healing	20
High-purity magnesium pin enhances bone consolidation in distraction osteogenesis model through activation of the VHL/HIF-1α/VEGF signaling	20
Collagen membranes for skin wound repair: A systematic review	19
Mechanical properties and osteoblast proliferation of complex porous dental implants filled with magnesium alloy based on 3D printing	18
Porous shape memory scaffold of dextran and hydroxyapatite for minimum invasive implantation for bone tissue engineering applications	18
Bioactive anti-oxidative polycaprolactone/gelatin electrospun nanofibers containing selenium nanoparticles/vitamin E for wound dressing applications	17
Surface functionalized mesoporous silica nanoparticles for intravitreal application of tacrolimus	16
Nerve growth factor loaded macrophage-derived nanovesicles for inhibiting neuronal apoptosis after spinal cord injury	16
Osteoconductivity of bioactive Ti-6Al-4V implants with lattice-shaped interconnected large pores fabricated by electron beam melting	16
Emulsion-free chitosan–genipin microgels for growth plate cartilage regeneration	16
PVA/anionic collagen membranes as drug carriers of ciprofloxacin hydrochloride with sustained antibacterial activity and potential use in the treatment of ulcerative keratitis	16

A review on alginate-based bioinks, combination with other natural biomaterials and characteristics	16
A review of graphene quantum dots and their potential biomedical applications	16
Targeted PD-L1 PLGA/liposomes-mediated luteolin therapy for effective liver cancer cell treatment	16
In vitro study of antibacterial and osteogenic activity of titanium metal releasing strontium and silver ions	15
A review of functionalised bacterial cellulose for targeted biomedical fields	15
Gold embedded chitosan nanoparticles with cell membrane mimetic polymer coating for pH-sensitive controlled drug release and cellular fluorescence imaging	15
ICG/5-Fu coencapsulated temperature stimulus response nanogel drug delivery platform for chemo-photothermal/photodynamic synergetic therapy	15
Palmatine-loaded electrospun poly(ε-caprolactone)/gelatin nanofibrous scaffolds accelerate wound healing and inhibit hypertrophic scar formation in a rabbit ear model	15
In vitro characterization of xeno-free clinically relevant human collagen and its applicability in cell-laden 3D bioprinting	15
Relationships between the material properties of silicone hydrogels: Desiccation, wettability and lubricity	15
Osteogenic capability of strontium and icariin-loaded TiO₂ nanotube coatings in vitro and in osteoporotic rats	15
Antimicrobial dressing of silver sulfadiazine-loaded halloysite/cassava starch-based (bio)nanocomposites	14
GSH triggered intracellular aggregated-cisplatin-loaded iron oxide nanoparticles for overcoming cisplatin resistance in nasopharyngeal carcinoma	14
Polyethylene glycol diacrylate scaffold filled with cell-laden methacrylamide gelatin/alginate hydrogels used for cartilage repair	14
Cerium oxide nanomaterial with dual antioxidative scavenging potential: Synthesis and characterization	14
In vivo evaluation of biocompatibility and immune modulation potential of poly(caprolactone)–poly(ethylene glycol)–poly(caprolactone)-gelatin hydrogels enriched with nano-hydroxyapatite in the model o	14
Preparation of biocompatible wound dressings with dual release of antibiotic and platelet-rich plasma for enhancing infected wound healing	14
Prevention of urinary infection through the incorporation of silver–ricinoleic acid–polystyrene nanoparticles on the catheter surface	13
Efficacy, safety, and physicochemical properties of a flowable hemostatic agent made from absorbable gelatin sponge via vacuum pressure steam sterilization	13
PEG-α-CD/AM/liposome @amoxicillin double network hydrogel wound dressing—Multiple barriers for long-term drug release	13
Two methods for constructing ZIF-8 nanomaterials with good bio compatibility and robust antibacterial applied to biomedical	13
Fabrication of multilayer tubular scaffolds with aligned nanofibers to guide the growth of endothelial cells	13
Conductive, self-healing, and antibacterial Ag/MXene-PVA hydrogel as wearable skin-like sensors	12
Phenolated alginate-collagen hydrogel induced chondrogenic capacity of human amniotic mesenchymal stem cells	12
Fabricating a pre-vascularized large-sized metabolically-supportive scaffold using Brassica oleracea leaf	12
Gelatin/poly(vinyl alcohol) based hydrogel film – A potential biomaterial for wound dressing: Experimental design and optimization followed by rotatable central composite design	12
Tantalum-containing mesoporous bioactive glass powder for hemostasis	12
Progress of biomaterials for bone tumor therapy	12
Nb-Ti-Zr alloys for orthopedic implants	12
Decellularized human amniotic membrane reinforced by MoS₂-Polycaprolactone nanofibers, a novel conductive scaffold for cardiac tissue engineering	12
Bioartificial injectable cartilage implants from demineralized bone matrix/PVA and related studies in rabbit animal model	12
A new hydrophilic biodegradable ureteral stent restrain encrustation both in vitro and in vivo	12
Fabrication of 3D Printed poly(lactic acid) strut and wet-electrospun cellulose nano fiber reinforced chitosan-collagen hydrogel composite scaffolds for meniscus tissue engineering	12
Targeted gold nanoshelled hybrid nanocapsules encapsulating doxorubicin for bimodal imaging and near-infrared triggered synergistic therapy of Her2-positve breast cancer	12
Electrospun PLGA and PLGA/gelatin scaffolds for tubularized urethral replacement: Studies in vitro and in vivo	12
Pharmaceutical evaluation of atorvastatin-loaded nanostructured lipid carriers incorporated into the gelatin/hyaluronic acid/polycaprolactone scaffold for the skin tissue engineering	11
In vitro evaluation of bone cements impregnated with selenium nanoparticles stabilized by phosphatidylcholine (PC) for application in bone	11
Plant based cross-linkers for tissue engineering applications	11
Co-delivery of the autophagy inhibitor si-Beclin1 and the doxorubicin nano-delivery system for advanced prostate cancer treatment	11
Three dimensional polyvinyl alcohol scaffolds modified with collagen for HepG2 cell culture	11
Preparation and characterization of chitosan/carboxymethyl pullulan/bioglass composite films for wound healing	11
Developing a novel magnesium calcium phosphate/sodium alginate composite cement with high strength and proper self-setting time for bone repair	11
3D bioprinted GelMA/GO composite induces osteoblastic differentiation	11
Composite sponges from sheep decellularized small intestinal submucosa for treatment of diabetic wounds	10
Injectable in situ intelligent thermo-responsive hydrogel with glycyrrhetinic acid-conjugated nano graphene oxide for chemo-photothermal therapy of malignant hepatocellular tumor	10
Development of a chitosan and hyaluronic acid hydrogel with potential for bioprinting utilization: A preliminary study	10
Metal doped calcium silicate biomaterial for skin tissue regeneration in vitro	10
Progress in the application of spider silk protein in medicine	10
Biological and mechanical evaluation of mineralized-hydrogel scaffolds for tissue engineering applications	10
PEGDA/HA mineralized hydrogel loaded with Exendin4 promotes bone regeneration in rat models with bone defects by inducing osteogenesis	10

A novel natural-derived tilapia skin collagen mineralized with hydroxyapatite as a potential bone-grafting scaffold	10
Influence of gelatin and collagen incorporation on peroxidase-mediated injectable pectin-based hydrogel and bioactivity of fibroblasts	10
Multi-network granular hydrogel with enhanced strength for 3D bioprinting	10
Oral delivery of liraglutide-loaded Poly-N-(2-hydroxypropyl) methacrylamide/chitosan nanoparticles: Preparation, characterization, and pharmacokinetics	10
Human amniotic membrane as a multifunctional biomaterial: recent advances and applications	10
Further structural characterization of ovine forestomach matrix and multi-layered extracellular matrix composites for soft tissue repair	9
In vitro characterization of novel multidrug-eluting soy protein wound dressings	9
Biocompatibility study of modified injectable hyaluronic acid hydrogel with mannitol/BSA to alveolar bone cells	9
The improvement of biocompatibility by incorporating porphyrins into carbon dots with photodynamic effects and pH sensitivities	9
Lidocaine-loaded reduced graphene oxide hydrogel for prolongation of effects of local anesthesia: In vitro and in vivo analyses	9
Fabrication of chondrocytes/chondrocyte-microtissues laden fibrin gel auricular scaffold for microtia reconstruction	9
Improving corrosion resistance and biocompatibility of AZ31 magnesium alloy by ultrasonic cold forging and micro-arc oxidation	9
A novel degradable tricalcium silicate/calcium polyphosphate/polyvinyl alcohol organic-inorganic composite cement for bone filling	9
Genipin crosslinked chitosan/PEO nanofibrous scaffolds exhibiting an improved microenvironment for the regeneration of articular cartilage	9
Marine spongin incorporation into Biosilicate® for tissue engineering applications: An in vivo study	9
Magnetic nanostructured lipid carrier for dual triggered curcumin delivery: Preparation, characterization and toxicity evaluation on isolated rat liver mitochondria	9
Construction of novel amphiphilic chitosan-polylactide graft copolymer nanodroplets for contrast enhanced ultrasound tumor imaging	8
Preparation and antitumor activity of triphenylphosphine-based mitochondrial targeting polylactic acid nanoparticles loaded with 7-hydroxyl coumarin	8
IGF-1 loaded injectable microspheres for potential repair of the infarcted myocardium	8
Development of biological meniscus scaffold: Decellularization method and recellularization with meniscal cell population derived from mesenchymal stem cells	8
Prevention of intra-abdominal adhesions by a hyaluronic acid gel; an experimental study in rats	8
Preparation of gelatin-based hydrogels with tunable mechanical properties and modulation on cell–matrix interactions	8
Long-term antibacterial activity of a composite coating on titanium for dental implant application	8
Amniotic membrane allografts maintain key biological properties post SCCO₂ and lyophilization processing	8
Preparation, characterization, and in vitro release kinetics of doxorubicin-loaded magnetosomes	8
An enzyme-responsive Gp1a-hydrogel for skin wound healing	8
Enhanced vascularization and biocompatibility of rat pancreatic decellularized scaffolds loaded with platelet-rich plasma	8
Fabrication and characterization of an acellular annulus fibrosus scaffold with aligned porous construct for tissue engineering	8
Adjusting the accuracy of PEGDA-GelMA vascular network by dark pigments via digital light processing printing	8
A novel biocomposite scaffold with antibacterial potential and the ability to promote bone repair	8
Probing lubricated sliding wear properties of HDPE/UHMWPE hybrid bionanocomposite	8
Compressive properties and failure behavior of photocast hydroxyapatite gyroid scaffolds vary with porosity	8
An integrated strategy for designing and fabricating triple-layer vascular graft with oriented microgrooves to promote endothelialization	8
Macroscopic and histologic evaluation of cartilage regeneration treated using xenogenic biodegradable porous sponge cartilage scaffold composite supplemented with allogenic adipose derived mesenchymal	8
A keratin-based microparticle for cell delivery	8
Citric acid coated ultrasmall superparamagnetic iron oxide nanoparticles conjugated with lactoferrin for targeted negative MR imaging of glioma	7
Alternative radiopacifiers for polymethyl methacrylate bone cements: Silane-treated anatase titanium dioxide and yttria-stabilised zirconium dioxide	7
Antimicrobial and antibiofilm activities of meropenem loaded-mesoporous silica nanoparticles against carbapenem-resistant Pseudomonas aeruginosa	7
Antitumor activity of iRGD-modified red blood cell membrane nanoparticles loaded with Juglone and Oxaliplatin against colorectal cancer	7
Layered dermal reconstitution through epigallocatechin 3-gallate loaded chitosan nanoparticle within enzymatically crosslinked polyvinyl alcohol/collagen fibrous mat	7
3D printed biocompatible graphene oxide, attapulgite, and collagen composite scaffolds for bone regeneration	7
In vitro performance of 3D printed PCL−β-TCP degradable spinal fusion cage	7
Synthesis of casein-γ-polyglutamic acid hydrogels by microbial transglutaminase-mediated gelation for controlled release of drugs	7
The incorporation of β-tricalcium phosphate nanoparticles within silk fibroin composite scaffolds for enhanced bone regeneration: An in vitro and in vivo study	7
Preparation of bioactive and antibacterial PMMA-based bone cement by modification with quaternary ammonium and alkoxysilane	7
Printability assessment of psyllium husk (isabgol)/gelatin blends using rheological and mechanical properties	7
Preparation and biological properties of ZnO/hydroxyapatite/chitosan-polyethylene oxide@gelatin biomimetic composite scaffolds for bone tissue engineering	7
Preparation and characterization of antibacterial and anti-inflammatory hyaluronic acid-chitosan-dexamethasone hydrogels for peri-implantitis repair	7
Evolution of silicate bioglass particles as porous microspheres with a view towards orthobiologics	7
Chitosan nanoparticles containing fusion protein (Hspx–PPE44–EsxV) and resiquimod adjuvant (HPERC) as a novel booster vaccine for Mycobacterium tuberculosis	7
Nanostructured-lipid carriers-Chitosan hydrogel beads carrier system for loading of resveratrol: A new method of topical application	7
Biomimetic bone-like composites as osteo-odonto-keratoprosthesis skirt substitutes	7
Hollow cathode plasma nitriding of medical grade Ti6Al4V: A comprehensive study	7
In vitro drug release and antibacterial activity evaluation of silk fibroin coated vancomycin hydrochloride loaded poly (lactic-co-glycolic acid) (PLGA) sustained release microspheres	7
A functional coating to enhance antibacterial and bioactivity properties of titanium implants and its performance in vitro	7
Photocatalytic activity and antibacterial efficacy of UVA-treated titanium oxides	7