Journal of Thermoplastic Composite Materials

Article	Citations
Damage assessment of laminated composites using unsupervised autonomous features	78
In vitro degradation analysis and mechanical characterization of PLA-CF composites prepared by fused filament fabrication technique for bio-medical applications	67
Experimental investigation of warpage in thin CF/PEKK composite laminates consolidated under non-isothermal conditions	64
Effects of chemical treatment and gamma-ray irradiation on the structure-properties of sunn hemp and okra hessian cloth reinforced high-density polyethylene composites: A comparative study	62
Investigation of flame retardancy and physical-mechanical properties of mineral-based polyethylene composites	52
Crashworthiness performance of 3D printed thermoplastic polymer composite hexagonal multi-cellular tubes: A biomimetic approach for enhanced energy absorption	45
Studying the influence of fused deposition modeling parameters on the yield and impact strength of PLA/graphene/clay composite using Taguchi method	39
Development and characterization of bio-based composite films with matcha powder: Impact of matcha concentration and glutaraldehyde crosslinking on properties	35
Multi-scale analysis and structural application of the synergistic enhancement effect of silane coupling agent on the interface between PVA/rubber and cement	33
Influence of fibre curvature and orientation on the mechanical properties of injected irregular short hemp fibres reinforced polypropylene	31
Considering initial part quality and injection molding parameters in optimizing the reconsolidation of thermoplastic composite plates	29
Micromechanics-based finite element modeling of damping in hollow spheres/fiber-reinforced polymer composites	28
Investigation of the mechanical properties of 3D printed polylactic acid fabricated by fused deposition modeling technique	28
Optimal shape selection of pseudo-rigid-body model compliant centrifugal clutch manufactured by thermoplastics using TOPSIS approach	26
Preparation and properties of modified zirconium dioxide reinforced poly (butylene adipate-co-terephthalate)	26
Fracture failure of oil-collecting steel wire reinforced thermoplastic composite pipe	25
Influence of laser texturing on the properties of fusion joints between aluminum alloys and carbon fiber reinforced thermoplastic composites	25
Ecofriendly hybrid natural fiber reinforced polypropylene composites from biowastes	24
Optimizing high-temperature performance of asphalt binder using aromatic thermoplastic resin derived from petroleum feedstock	24
Transcrystallization, enhanced interface strength and mechanical properties in PE/(PA6 nanofiber)/graphene oxide thermoplastic polymer-polymer nanocomposites via annealing and increased remolding temp	24
The influence of expandable graphite on the thermal, flame retardant and mechanical characteristics of short carbon fiber reinforced polyamide composites	24
Effect of the cooling rate on the fracture toughness of carbon fiber reinforced thermoplastic composites	23
Prediction surface roughness of 3D printed parts using genetic algorithm optimized hybrid learning model	23
Tensile and impact properties of thermoplastic fibre hybrid composites based on air textured commingling hybrid yarns composed of carbon/aramid/polyamide 6 and carbon/glass/polyamide 6 filament yarns	23
Effect of line-focused infrared heating-assisted CF/PEEK in-situ consolidation compaction force on interlayer shear strength	22

Structural, linear/non-linear optical, and optoelectrical properties of PVB/Bi2WO6 nanocomposite for industrial applications	22
Multi-scale analysis of mechanical properties of RCA based on synergistic modification of carboxylic butadiene-styrene latex and PVA fiber	21
Effect of black sand nanoparticles on physical-mechanical properties of butyl rubber compounds	20
A correlation study on piezo-embedded carbon fibre reinforced polylactic acid composite: Experimental and numerical modelling	20
Improvement in mechanical and physical properties of starch-based films provided by cellulose nanocrystals extracted from rice straw	20
Experimental investigations on flexural performance of polymer composites with non-uniform out-of-plane waviness defect	20
Sunn hemp hessian cloth reinforced thermoplastic composites: Effects of chemical treatment and gamma-ray irradiation	19
Poly(lactic acid)/poly(ε-caprolactone) blends: Separate effects of nanocalcium carbonate and glycidyl methacrylate on interfacial characteristics	19
Utilization of crab shell as waste reinforced in thermoplastic elastomer composites for building applications in high humidity conditions	18
Properties of coir fibre/polylactic acid composites based on amylase processing	18
Experimental and statistical study on the effect of process parameters on the quality of continuous fiber composites made via additive manufacturing	18
A novel method for generating random fiber distributions for fiber-reinforced materials	18
Bi-directional porous beams under low-velocity impact: Made of carbon fiber reinforced PLA, fabrication with 3D printer and testing with impact equipment	18
Nonlinear thermo-mechanical buckling and postbuckling of sandwich FG-GPLRC spherical caps and circular plates with porous core by using higher-order shear deformation theory	17
Recycled thermoplastic polyurethane as a coupling agent in automotive polypropylene compounds with coconut fibers	17
An experimental investigation into single point incremental forming of glass fiber-reinforced polyamide sheet with different fiber orientations and volume fractions at elevated temperatures	17
Development and characterization of a recycled nylon fiber reinforced and nano-fly ash hybridized high impact performance polypropylene composite for sustainability	16
Prediction of tensile strength for carbon fiber reinforced composites through transfer learning	16
In-situ consolidation of thermoplastic composites by automated fiber placement: Characterization of defects	15
Experimental study on fire suppression by water film on the exterior facade of concave structures	15
Analysis of the steam aging properties of boron nitride reinforced bamboo fiber/high density polyethylene composites	15
Vacuum-bag-only consolidation of C/PEKK fiber placed preforms with engineered gas evacuation channels	15
Simulating performance of tow reinforced hybrid-molded composites	15
Application and thermal field analysis of multilayer thermal insulation in in-situ forming process of thermoplastic composites	14
Tribological performance analysis of sustainable basalt micro-filler loaded bio-based polypropylene and high density polyethylene composites	14
Evaluation of crystallinity, thermal, mechanical and morphological features of high density polyethylene composites reinforced with crosslinked semifluorinated acrylate polymer microspheres	14
Effect of teak wood on recycled HDPE/pine wood composites subjected to termite attack and accelerated weathering	14
Investigation of low-percentage graphene reinforcement on the mechanical behaviour of additively manufactured polyethylene terephthalate glycol composites	14
Study of the mechanical properties and failure behavior of a novel PA12 lattice sandwich structure	14
An experimental study on filling of gaps and void pockets during vacuum-bag-only consolidation of fiber placed preforms	14
Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber	14
A new semi-analytical approach for nonlinear electro-thermo-mechanical dynamic responses of FG-GPLRC shallow spherical caps and circular plates with porous core	14
A data-driven microstructural rationale for micro-void nucleation in discontinuous fiber composites	13
Understanding a frequency shifting phenomenon interfering with in-line acoustic monitoring of an extrusion compounding process for polymer composites	13
Crystallization and crystal morphology of polymers: A multiphase-field study	13
Interfacial shear strength of surface functionalized and functionalized CNT coated carbon fiber: A single fiber fragmentation study	13
Structural, electrical and magnetoresistance feature of PP+Fe3O4 + Multi-walled carbon nanotubes nano-hybrid based polymer nanocomposite	13
Investigation of crack detection properties of elastomer-based nanocomposites under cyclic strain loading with graphene and carbon black interaction filler	12
Thermoplastic elastomers based on recycled high-density polyethylene/ground tire rubber/ethylene vinyl acetate: Effect of ground tire rubber regeneration on morphological and mechanical properties	12
Analysis of engineering performance of concrete comprising recycled crushed plastic waste and fly ash	12
Unraveling the blend composition influence on crystallization, melting, thermal stability and rheological behavior of PMMA/EVA/MWCNTs nanocomposites	12
On printability of barium titanate reinforced PVDF nano ink for smart and flexible sensors: Rheological and concentration view point	12
Research progress on advanced carbon fiber reinforced composite honeycomb structures	12
Non-isothermal crystallization kinetics of ethylene-vinyl acetate copolymer and ethylene-vinyl acetate copolymer/butadiene rubber thermoplastic vulcanizate	12
Green synthesis of boehmite-reinforced cashew gum/polypyrrole biopolymer blend for advanced biomaterials	11
Bagasse fiber reinforced chemically functionalized polystyrene composites	11
Influence of the extraction method on the chemical, physical and mechanical characteristics of oil palm (Elaeis guineensis) petiole fibers for the reinforcement of composite materials	11
Formation and occurrence of subsurface damage mechanism with the analysis of optimal machining strategy when milling different fibre matrix combination of unidirectional FRP’s	11
Simple construction of PVA hydrogels based on dehydration drying method via polydopamine-modified graphene nanocomposites	11
Non-Coking coal as an additive to enhance properties of groundnut shell reinforced polypropylene composites	11

Characterization of polylactic acid/thermoplastic polyurethane composite filaments manufactured for additive manufacturing with fused deposition modeling	11
Experimental study on two-body and three-body abrasive wear behaviour of jute-natural rubber flexible green composite	11
Insights into structural, thermal, electrical and mechanical properties of copper alumina reinforced chlorinated natural rubber nanocomposites	11
Effects of top ply orientation and a resin-rich interface layer on the strength of LMPAEK-CF/PEEK-CF overmoulded joints	11
Influence of surface treatments and addition of a reactive agent on the properties of PLA/flax and PLA/bamboo composites	10
Status of art and prospects in cutting force modeling and control optimization strategies for carbon fiber reinforced polymer (CFRP)	10
Techniques, applications, and prospects of recycled polyethylene terephthalate bottle: A review	10
A novel application of titanium suboxide to enhance the flame retardancy, thermal stability, and thermal and electrical conductivity of silicone rubber	10
Dynamic mechanical analysis of PA 6 under hydrothermal influences and viscoelastic material modeling	10
Achieving performance and functionality in PLA-based packaging: Insights from hybrid composites with false banana (Enset) fiber and ZnO nanoparticles	10
Modelling and fabrication of flexible strain sensor using the 3D printing technology	10
Mechanical properties and discrete element simulation of KH-560 modified polystyrene concrete	10
Effects of the molecular weight of soft segment of polycaprolactone polyurethane prepolymer on the properties of polyurethane composites with high wood content	9
Effect of fire-retardant coating on bamboo and banana-based biocomposites: A comparative study thermogravimetric analysis and cone calorimeter tests	9
Process-induced skewness of flow fronts and fiber orientations in LFT-D compression molding considering processing, characterization, and simulation	9
Analysis and optimization of the delamination factor in the drilling of wood-thermo plastic composites: An approach based on artificial intelligence	9
A study on the influence of nano-c-BN on the physical and mechanical characteristics of PMMA biocomposites used in dental prosthetics	9
Development and characterization of surface functionalized hierarchical carbon fiber reinforced hybrid polypropylene composites	9
It’s not waste, it’s a resource: Utilizing industrial waste fibers/mineral fillers to attain flame retardant biocomposites	9
Optimization through combined compromise solution and weight determination through SHANNON-ENTROPY for multi criteria decision making in tribological testing of ultrahigh molecular weight polyethylene	9
Flame retarded plasticized poly(lactic acid) using phosphorus-based additives	9
Physicochemical and antimicrobial characteristics of polypropylene-based nanocomposite containing SiO2-Ag nanoparticles prepared by gamma irradiation	8
Effect of gamma irradiation on optical and electronic properties of PVC/CoSe/TiO 2 nanocomposites	8
Influence of fiber concentration and length on the dielectric, mechanical, and thermal properties of maple wood fiber-reinforced polypropylene	8
Research on the performance of three-dimensional-braided-glass fiber reinforced in-situ polymerized TPU	8
Investigating the low velocity impact response of additively manufactured tri-material composite structure with application on helmet	8
Investigation of earing defect and thickness distribution in stamp forming of continuous glass fiber reinforced polypropylene composite laminates	8
Expression of Concern	8
Assessing the effect of FDM processing parameters on mechanical properties of PLA parts using Taguchi method	8
Investigation of the effect of graphene nanosheets on the properties of beech/polylactic acid flour composites	8
Mechanical behavior and microstructural analysis of rotomolded LLDPE composites filled with surface-modified peanut shell powder	8
Sustainable natural biopolymers for biomedical applications	8
Fabrication of Electrospun Exfoliated Graphite Nanosheets/Polystyrene composite nanofiber mats	8
Quality improvement of Nd: YAG laser marked DMC and QR codes on the surface of PBT/glass fiber composites by DOE methodology	8
Novel high-efficiency Poly(butyl acrylate-co-2-ethylhexyl acrylate) grafting of Poly(methyl methacrylate) impact modifier: Synthesis and application	8
In-situ monitoring of the vacuum-bag-only consolidation process of CF/LM-PAEK composites with an embedded Fibre Bragg Grating sensor	8
Nature-inspired solutions: A comprehensive review of biomimetic nanoparticles in nanomedicine	8
Steering of carbon fiber/PEEK tapes using Hot Gas Torch-assisted automated fiber placement	8
Investigating effect of tool geometry on drilling performance of carbon fiber-reinforced polypropylene thermoplastic composite	8
Fabrication and characterization of PEKK nanocomposites: An in vitro study	8
On secondary recycling of high-density polyethylene with reinforcement of stubble powder by a material extrusion process for construction applications	8
Hygrothermal aging effects on tribological and mechanical behaviors of mollusc shell-reinforcement UHMWPE biocomposites	8
In situ interlaminar shear behavior of carbon fibers reinforced polymer composites exposed to severe thermal aggressions: PPS versus epoxy laminates	8
Numerical simulation analysis of forming of continuous fiber reinforced polypropylene composites: Relaxation, creep, and hot stamping	8
On digital twinning of fused filament fabrication for tensile properties of polyvinylidene fluoride composites-based functional prototypes	8
Processing and characterization of thermoplastic polyurethane composites filled with graphene oxide produced by laser sintering	7
Incorporation of graphene nanoplatelets/hydroxyapatite in PMMA bone cement for characterization and enhanced mechanical properties of biopolymer composites	7
Fly ash incorporation in polypropylene/ethylene-vinyl-acetate (PP/EVA) blends: An in-depth morphological and performance study	7
Preparation, characterization and antimicrobial activity of sodium carboxymethyl cellulose - based hydrogels by freeze-thaw method	7
Mechanical and viscoelastic properties of basalt-hemp hybrid reinforced polypropylene	7
A 3D finite element model to simulate progressive damage in unidirectional- and woven-fibre thermoplastic discontinuous-long-fibre composites	7
Comparative study of mechanical behaviors of additively manufactured continuous fiber-reinforced thermoplastic composites undergoing flexural and mode I fracture	7
Multi-scale analysis of styrene butadiene latex modified PVA fiber concrete	7
Enhancing the machinability of recycled polypropylene composites reinforced with waste cotton and pine sawdust through milling parameters optimization	7
Single point incremental forming of polyamide/30 wt% short glass fiber composite	7
Fabrication of co-continuous morphology of polysulfone/nylon 6, 6 nanocomposites by varying the concentration of organically modified clay content	7
Optimal blending ratios of natural rubber latex and acrylic emulsion for coating applications	7
Reviewing the manufacturing challenges and scientific debates: Insights into the antibacterial capabilities and potential applications of PLA/ZnO nanocomposites	7
Comparative study on low velocity impact behavior of natural hybrid and non hybrid flexible thermoplastic based composites	7
Kenaf fiber reinforced chemically functionalized styrene-acrylonitrile composites	7
Biodegradable starch-polyvinyl alcohol composite films by the incorporation of lignin for packaging applications	7
Application of titanium dioxide nanorod (TNr)@SiO2 with low photocatalytic effect and high UV resistance in poly(vinyl chloride) film	7
Biodegradable carboxymethyl cellulose based material for sustainable/active food packaging application	6
Nonlinear thermo-mechanical static and dynamic buckling responses of functionally graded porous graphene-reinforced spherical shells and circular plates with spider-web stiffeners	6
Development of paving slab product manufactured from thermoplastic elastomer composites reinforced with crab shell particles for out-door application	6
Bilayer AA7075-thermoplastic composite structures manufactured by hot pressing: Effect of glass fiber amount of polypropylene composite on mechanical properties	6
Bio-based sustainable composites from hazelnut shell and PP/SEBS blends	6
The importance of extensional viscosity on a peculiar ear-flow front for injection molding simulations of fiber-reinforced composites	6
Compressive and bending behavior of foam-filled composite sandwich panel with novel M-shaped core reinforced by nano-silica	6
Effects of carbon-based nanofillers on mechanical, electrical, and thermal properties of bast fiber reinforced polymer composites	6
Effect of packing pressure on stagnation weld-line strength for thermoplastic semicrystalline glass fiber reinforced material	6
Adsorption of chlorpyrifos in water using polyaniline/graphene oxide composites	6
Mechanical properties of calcium phosphate reinforced polyhydroxyalkanoate (PHA) biocomposite	6
A parametric study on the behavior of FMLs based on UHMWPE composite under high velocity impact loading	6
Development of waste rice husk/PVC/GO nanocomposite using TA–CaO adduct and ESO as green additives	6
Machine learning-based approach for predicting the compressive strength of 3D printed hexagon lattice-cored sandwich structures	6
Study on the properties of EPS composite concrete enhanced by silane coupling agent: Experiment and molecular simulation	6
Preparation and thermal properties of modified binary paraffin - Hexadecylamine shaped composite phase-change energy storage materials	6
Improving the material extrusion processing of thermoplastic olefin/graphene nanoplatelet composites through control of the morphology	6
Machinability of wood-plastic composites from the CNC milling process using the Box-Behnken design and response surface methodology for building applications	6

Studying the influence of friction stir welding parameters on the mechanical properties of PP/EPDM/Clay nanocomposites by response surface methodology combined with desirability function approach	6
Cellulose esterified with low molecular weight PBT and its composites with PBAT	6
Experimental investigation of vibration damping capabilities of 3D printed metal/polymer composite sleeve bearings	6
Research progress of five biodegradable plastics reinforced with different plant fillers	6
Stimuli-responsive nanofiller-based shape memory polymer composites: Actuation methods and biomedical applications	6
Anticancer effect of Poly(N-vinyl pyrrolidone/chitosan/silver nanoparticles) nanocomposite synthesized by gamma radiation	6
Effect of filler surface treatment on the physico-mechanical properties of filler/styrene-butadiene rubber nanocomposites	6
Influence of date-palm-fibers (DPFs) content and nanocrystallite FeCrCuMnTi high-entropy alloy fillers in polypropylene matrix on mechanical and structural performance of thermoplastic composite mater	6
Current application of recycled waste plastics as a sustainable materials: A review on availability, processing and application	6
Sunflower oil-based polyurethane/graphene composite: Synthesis and properties	5
Nonisothermal crystallization kinetic behavior of pure ethylene-Vinyl acetate copolymers and ethylene-Vinyl acetate copolymer/nitrile rubber thermoplastic vulcanizate	5
Effect of infill pattern and filler ratio on the mechanical properties of 3D printed eco-friendly wollastonite/polylactic acid composites	5
Numerical and experimental crashworthiness assessment of carbon-fiber reinforced thermoplastic energy absorbers	5
Analysis of fiber stresses during high-tension winding molding of thermoplastic composites	5
Simulating induction heating of fabric based thermoplastic composites using measured electrical conductivities	5
Mechanical, thermal, rheological assessment of polyamide-6 reinforced composites by addition of lamellar zirconium phosphate	5
Acrylonitrile butadiene styrene/multi-walled carbon nanotubes nanocomposite foams for electromagnetic interference shielding with optimized performance	5
Analysis of tensile properties of geogrids for different morphology parameters	5
Synthesis and piezoelectric photocatalytic, mechanical, and electrical properties of porous t-BaTiO3/Ag/β-PVDF composite material	5
Influence of hygrothermal ageing on the novel infusible thermoplastic resin reinforced with quadriaxial non-crimp glass fabrics	5
Sustainable development and tribological optimization of CaO-reinforced UHMWPE composites via surrogate modeling and evolutionary algorithms	5
Biaxial fatigue failure of short glass fiber reinforced polyamide 6,6: An in-depth investigation of stiffness drop and microstructural evolution	5
Mechanical behaviors and flammability of perlite filled recycled high-density polyethylene composites	5
Improvement in optical absorption and emission characteristics of polymethyl methacrylate in solution cast polymethyl methacrylate/polyvinyl carbazole polyblends	5
Antimicrobial membrane surface modification by copper-doped polysaccharide coating on ultrafiltration membrane for advanced wastewater treatment	5
Electrospray coating of poly ether ether ketone (PEEK) dental implant material with Zein-CaSiO3 composite	5
Interaction between thermoplastic starch and cellulose in poly (butylene adipate-co-terephthalate) composites with cellulosic fillers	5
Experimental and analytical investigation of the tensile behavior of 3D-printed composites based on micro-CT analysis	5
Studies on interfacial shear strength of pineapple leaf fibre from agro-waste reinforced polypropylene composites: Influence of fibre length and carding parameters	5
Effect of plasma treatment of wood fiber on the wettability, dynamic mechanical and thermal properties of polypropylene composite panels	5
Performance evaluation of melamine derivatives as flame retardant additive in chicken feather containing thermoplastic polyurethane biocomposites	5
Fracture morphology and strength characteristics of poly-lactic acid and poly-ethylene terephthalate glycol composites combined with taguchi method and response surface methodology	5
CFD-PBM simulation of PET and supercritical CO2 microcellular foaming	5
Polydopamine modified with Ag and CuO nanoparticles electrode for glucose sensor	5
Development and fabrication of continuous carbon fiber reinforced thermoplastic porous composite structures with different infill patterns by using additive manufacturing	5
Photocatalytic Ag-ZnO − poly-3-hydroxyalkanoate composite film for translucent coating application	5
Synergistic effects of graphene nanoparticles on the thermomechanical properties of PEEK-HNTs nanocomposites	5
Machine learning prediction in distortion behavior of unsymmetric laminates under hygrothermal environment	5
Effect of irradiation on Co 0.72 Sr 0.07 Ni 0.21 Fe 2 O	5
Enhancing 3D-Printed PP-CF parts: A novel resin-filling technique for mechanical property optimization	5
Impact of printing temperature on the multifunctionality of PLA/TiO 2 composites fabricated via fused filament fabrication	5
Copolymer-grafted halloysite nanotubes embedded in electrospun fibers as a composite carrier for doxorubicin delivery	5
Optimization of conductive PETG-based composite for strain-sensing prosthetic sockets using 3D printing	5
Effect of additives on the performance of extruded polymer composites: A comprehensive review	5
Examination of electrical conductivity, thermal stability, tensile strength and elongation of PA6/CNT/Clay nanocomposite fabricated by 3D printing	5
Comparative study on three body abrasive wear behaviour of natural compliant thermoplastic composite under dry and lubricated conditions	5
Hybrid additive manufacturing of highly sustainable Polylactic acid -Carbon Fiber-Polylactic acid sandwiched composite structures: Optimization and machine learning	5
Optimization of electrospun chitosan/polyethylene oxide hybrid nanofibril composite via response surface methodology	5
Optimization of graphene oxide/conducting polymer nanocomposites as electrodes for nonenzymatic glucose sensing. Part I: Preparation, characterization and surface morphology	4
Thermoelastic analysis of FG-CNTRC cylindrical shells with various boundary conditions and temperature-dependent characteristics using quasi-3D higher-order shear deformation theory	4
Process optimisation on the compressive strength property for the 3D printing of PLA/almond shell composite	4
Temperature field analysis for automated placement with thermoplastic composites based on the line-focused infrared heater	4
Expression of Concern	4
Recent research developments of textile flexible structures with high puncture resistance: A review	4
Reducing fire hazards and enhancing the thermal stability, acoustical, and UV protection of polyvinyl alcohol using bio-based flame retardant	4
Temperature-Dependent modelling of tension, in-Plane shear, and bending behaviour in non-isothermal thermo-Stamping process simulation of unidirectional UHMWPE fibre reinforced thermoplastic TPU compo	4
Recent advancements in thermoplastic composite materials in aerospace industry	4
Studying the influence of the addition of nano-titanium dioxide on the rheological, mechanical, thermal, and electrical properties of polycarbonate/wood flour	4
Multi-objective assessment of drop-weight impact in 3D-printed fiber-reinforced nylon composites	4
Effect of biomass-derived carbon nanosphere on mechanical properties of polypropylene/empty fruit bunch fibre composites	4
Prediction of the mechanical properties of heat-treated fused filament fabrication thermoplastics using adaptive neuro-fuzzy inference system	4
Biopolymer blend composite films based on polyvinyl alcohol/ chitosan/ grape seed extract via green approach for flexible optoelectronic devices	4
Role of macadamia shell nut extracted silicon carbide and natural fiber-reinforced PVA composite and its mechanical, thermal conductivity, dielectric and EMI shielding effectiveness	4
Electromagnetic interference shielding study in microwave and NIR regions by highly efficient Ag/ZnS and polyaniline-Ag/ZnS particles	4
Analysis and optimization of welded joints of HDPE pipes during butt fusion welding: State-of-the-art and emerging directions	4
Cobalt atom collapsed in a single chain of polymethyl methacrylate and its zinc oxide nanocomposite, thermal, electrical, and optical behaviors	4
The promise of carbon nano-onions for thermoplastic and biodegradable thermoplastic nanocomposites—status quo and future vision	4
Efficacy of polymeric liners in preventing internal corrosion of oil pipelines: A review	4
The effect of aggregate granulometry and mixing percentage on the mechanical properties and efficiency of cement and polymer binder composite concretes	4
A global sensitivity analysis approach for designing high-performance braided thermoplastic composites: A case study of braided carbon fiber reinforced poly ether ether ketone	4
Investigation of mechanical and frictional properties of ulexite and colemanite filled acrylonitrile-butadiene-styrene polymer composites for industrial use	4
Enhanced hydrophobicity of polyurethane coating for steel protection through replication and nanomaterial integration	4
Influence of construction method of submicron polybutadiene particles on transparent methacrylate-acrylonitrile-butadiene-styrene resin properties	4
Corrigendum	4
Eccentric ballistic impact of fiber-metal laminates and aluminum plates supported with different boundary conditions	4
Experimental and numerical investigation on bending and compressive behavior of carbon-epoxy sandwich panel with novel M-shaped core	4
Characterization of thermoplastic composite joints fabricated by the combined refill friction stir spot welding and riveting process	4
Oleylamine functionalization of boron nitride nano-platelets for Polyamide-6 thermally conductive injection moulded composites	4
Mechanical behavior of bio-inspired helicoidal thermoplastic composites	4
Carboxyl-functionalized graphene reinforced aromatic polyamide nanocomposites	4
Effects of nanotitania on structure-dielectric properties of polypropylene blends	4
A comprehensive review on different leaf fiber loading on PLA polymer matrix composite	4
Tribological and mechanical behaviors of Fe 3 O 4 NPs reinforced UHMWPE biocomposite	4
Synthesis of polymethyl methacrylate/depolymerized polyethylene terephthalate blend reinforced by titanium dioxide nanoparticles for dental fillings applications	4
Analysis and prediction of the joint strength of friction stir welded Aluminium 5754 to polyamide using response surface methodology and artificial neural network	4
Effect of de-sizing on the structural and mechanical properties of carbon fiber reinforced polypropylene composites molded by the novel direct fiber feeding injection molding technology	4
Effect of natural fillers as reinforcements on mechanical and thermal properties of HDPE composites	4
Optimization of polypropylene high-strength injection molding welding and interface structure analysis	4
Obtaining cellulose nanocrystals by acid hydrolysis procedure; and their use as reinforcement in polylactide biocomposites	4
Composite cement embedded in a biopolymer matrix for bone tissue regeneration	4
Organically modified mesoporous silica as a performance additive in tubular quenched polypropylene films	4
Research on temperature control of CF-PP induction heating based on improved particle swarm fuzzy PID	4
Development of Kevlar®/polypropylene towpregs through optimized commingling nozzle and processing parameters for thermoplastic composites	4
Mechanical and thermal characterization of polymeric films formed in deuterated ionic liquids	4
Analyses of mechanical properties and morphological behavior of additively manufactured ABS polymer, ABS/PBT blend, and ABS/PBT /CNT nanocomposite parts	4