Journal of Aerospace Engineering

Papers
(The median citation count of Journal of Aerospace Engineering is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-04-01 to 2024-04-01.)
ArticleCitations
Damage Identification of Bridge Structures Considering Temperature Variations-Based SVM and MFO33
Bolt Pretightening Force Measurement Based on Strain Distribution of Bolt Head Surface23
Structural Batteries in Aviation: A Preliminary Sizing Methodology20
Numerical and Experimental Investigation of Nonlinear Lamb Wave Mixing at Low Frequency19
Optimal Wireless Sensor Placement in Structural Health Monitoring Emphasizing Information Effectiveness and Network Performance19
Predictive Model of Dynamic Mechanical Properties of VE Damper Based on Acrylic Rubber–Graphene Oxide Composites Considering Aging Damage17
Robust Adaptive Iterative Learning Control for High-Precision Attitude Tracking of Spacecraft17
Hierarchical Collaborative Navigation Method for UAV Swarm17
Thermomechanical Nonlinear Buckling of Pressurized Shear Deformable FGM Cylindrical Shells Including Porosities and Elastically Restrained Edges16
Data-Driven Structural Health Monitoring Approach Using Guided Lamb Wave Responses15
Natural Frequencies and Global Mode Functions for Flexible Jointed-Panel Structures14
Unbalance Vibration Characteristics and Sensitivity Analysis of the Dual-Rotor System in Aeroengines14
Stochastic Modeling and Reliability Analysis of Wing Flutter14
Reliability-Based Lifetime Fatigue Damage Assessment of Offshore Composite Wind Turbine Blades13
Finite-Element Modeling for Static Bending Analysis of Rotating Two-Layer FGM Beams with Shear Connectors Resting on Imperfect Elastic Foundations13
Fully Coupled Aeroelastic Analyses of Wing Flutter towards Application to Complex Aircraft Configurations12
Nonlinear Reduced-Order Modeling of Flat Cantilevered Structures: Identification Challenges and Remedies12
Magnesium-Based Cements for Martian Construction11
Coordinated Control Based on Reinforcement Learning for Dual-Arm Continuum Manipulators in Space Capture Missions11
Theoretical and Numerical Analyses of Aerodynamic Characteristics on Shock Vector Control11
Attitude Control of a Moving Mass–Actuated UAV Based on Deep Reinforcement Learning11
Application of Mathematical Modeling to Study Near-Field Pressure Pulsations of a Near-Future Prototype Supersonic Business Aircraft11
Design and Testing of an Unmanned Aerial Vehicle Manufactured by Fused Deposition Modeling11
Experimental Investigation of Ground Effect on the Vortical Flow Structure of a 40° Swept Delta Wing11
Thermal Extraction of Volatiles from Lunar and Asteroid Regolith in Axisymmetric Crank–Nicolson Modeling10
All-Metallic Phase Change Thermal Management Systems for Transient Spacecraft Loads10
Sensitivity Analysis of Counterflow Thrust Vector Control with a Three-Dimensional Rectangular Nozzle10
Tether Deformation of Spinning Electrodynamic Tether System and Its Suppression with Optimal Controller10
Ensuring the Structural Safety of Overhead Transmission Lines by Design10
Impact of Battery Performance on the Initial Sizing of Hybrid-Electric General Aviation Aircraft10
Deployment Dynamics for a Flexible Solar Array Composed of Composite-Laminated Plates10
Experimental Investigation of Flow Control on a High-Lift Wing Using Modulated Pulse Jet Vortex Generator9
Dynamic Characterization of Wind Speed under Extreme Conditions by Recurrence-Based Techniques: Comparative Study9
Assessments of Structural Health Monitoring for Fatigue Cracks in Metallic Structures by Using Lamb Waves Driven by Piezoelectric Transducers9
Effect of Slot Area Ratio and Slot Angle on Swirl Cooling in a Gas Turbine Blade Leading Edge9
New Type of Pounding Tuned Mass Damper for Confined Space8
Numerical and Experimental Investigations on Windage Heating Effect of Labyrinth Seals8
A 3D-Printing Centered Approach to Mars Habitat Architecture and Fabrication8
Aerodynamic Drag Characteristics of Miura-Ori Composite Structure8
Robust Optimal Design for Surface Accuracy of Mesh Reflectors Considering Cable Length Inaccuracy8
MIMO Adaptive High-Order Sliding Mode Control for Quadrotor Attitude Tracking8
Response of Graded Miura-Ori Metamaterials to Quasi-Static and Dynamic In-Plane Compression8
Effects of Inhomogeneous Wind Fields on the Aerostatic Stability of a Long-Span Cable-Stayed Bridge Located in a Mountain-Gorge Terrain8
Seismic Response Analyses of Transmission Towers under Multidimensional Ground Motions with Rocking and Torsion Components8
Flexural Behavior of Perforated Functionally Graded Composite Panels under Complex Loading Conditions: Higher-Order Finite-Element Approach8
A Continuous Nonlinear Sliding Mode Control with Fractional Operators for Quadrotor UAV Systems in the Presence of Disturbances8
Semianalytical Development of Dynamic Instability and Response of a Multiscale Laminated Hybrid Composite Plate8
Vibration Transport of Lunar Regolith for In Situ Resource Utilization Using Piezoelectric Actuators with Displacement-Amplifying Mechanism8
On the Reductions of Airfoil Broadband Noise through Sinusoidal Trailing-Edge Serrations7
Distributed Robust Formation Flying and Attitude Synchronization of Spacecraft7
Statistical Analysis of Peak Force Atomic Force Microscopy Data for the Interphase Thickness and Modulus in Carbon Fiber–Reinforced Epoxy Resin Composites Exposed to Different Heat and Humidity Levels7
Numerical Investigation on Flow Control of a Hypersonic Airfoil by Plasma Synthetic Jet7
Effects of Ilmenite on the Properties of Microwave-Sintered Lunar Regolith Simulant7
Trajectory Prediction of a Model Rocket Falling into the Towing Tank: Experimental Tests versus Numerical Simulations7
Robust Adaptive Control for Spacecraft Rendezvous with Predefined-Time Prescribed Performance and Input Saturation7
Active Wake Control of Flow Past a Circular Cylinder with Slot Jet7
Hypersonic Incident Shock-Boundary Layer Interaction Control by Wavy Patches7
Robust Nonsingular Terminal Sliding Mode Attitude Control of Satellites7
Attitude-Orbit Cooperative Control for Small-Scale Spacecraft with Chemical Propulsion: Adaptive Sliding Mode Control Based on Neural Network7
Performance Enhancement of a Supersonic Air Intake by Applying a Heat Source7
Multimode Guided Waves–Based Structural Defect Localization Longitudinally and Cross-Sectionally in T-Bars7
Key Construction Technologies for Large River-Crossing Slurry Shield Tunnel: Case Study7
Baseline-Free Damage Diagnostic Imaging Approach Relying on the Extraction of Converted Modes of Ultrasonic Guided Waves7
Application of the Improved Incremental Nonlinear Dynamic Inversion in Fixed-Wing UAV Flight Tests7
Onsite Identification of Moving Vehicle Loads on Multispan Continuous Bridge Using Both Dictionary Expansion and Sparse Regularization7
Novel Extreme Learning Machine Using Kalman Filter for Performance Prediction of Aircraft Engine in Dynamic Behavior7
Rate-Dependent Fracture Behavior of Aerospace Epoxies: PR-520 and 35027
Microvortex Generator Controlled Shock–Boundary Layer Interactions in Hypersonic Intake7
Weighted Transmissibility Assurance Criterion for Structural Damage Detection6
Virtual Free-Volume Revised Method and Adaptive Control for Solid Ducted Rockets6
Probabilistic-Based Nonlinear Progressive Failure Analysis of Piezoelectric Laminated Composite Shell Panels in Hygrothermal Environment6
New Numerical Modeling for Impact Dynamics Behavior of Composite Honeycomb Sandwich Structures6
Shape Optimization of Near-Space Airships Considering the Effect of the Propeller6
Airfoil–Vortex Interaction Noise Control Mechanism Based on Active Flap Control6
Aerodynamic Shape Optimization of a Gas Turbine Engine Air-Delivery Duct6
Anti-Unwinding Immersion and Invariance Adaptive Attitude Control of Rigid Spacecraft with Inertia Uncertainties6
Additively Manufactured Sound-Absorbing Porous Structures for Airfoil Trailing-Edge Noise Control6
Damping Force Analysis and Optimization of a Lunar Lander with MRF6
Instability and Vibration Analyses of Functionally Graded Carbon Nanotube–Reinforced Laminated Composite Plate Subjected to Localized In-Plane Periodic Loading6
DES of a Slingsby Firefly Aircraft: Unsteady Flow Feature Extraction Using POD and HODMD6
Combustion Characteristics of Paraffin-Polyethylene Blends Fuel for Solid Fuel Ramjet6
Applications of the Multilayer Porous Medium Modeling Approach for Noise Mitigation6
Constructing Spacecraft Components Using Additive Manufacturing and Atomic Layer Deposition: First Steps for Integrated Electric Circuitry6
Online One-Step Parameter Identification Method for a Space Robot with Initial Momentum in Postcapture5
A Novel Collision-Free Detumbling Strategy for a Space Robot with a 7-DOF Manipulator in Postcapturing Phase5
Design, Verification, and Test of the Bridge Structure Vibration Similarity Model5
Energy Absorption Characteristics and Failure Mechanism of Fabric Composite Channel Section Structure under Axial Crushing Loading5
Indirect Optimization of Underactuated Spacecraft Formation Reconfiguration in Elliptic Orbits5
Performance Improvement of Trailing Edge Internal Cooling with Drop-Shaped Pin Fin Array5
Propeller Characterization for Distributed Propulsion5
Implementation of UAV Smooth Path Planning by Improved Parallel Genetic Algorithm on Controller Area Network5
Active Disturbance Rejection Control for Hypersonic Flutter Suppression Based on Parametric ROM5
Novel Approach to Determine Spinning Satellites’ Attitude by RCS Measurements5
Thermomechanical Bending Analysis of FG Sandwich Plates Using a Quasi-Three-Dimensional Theory5
Performance Impacts of Metal Additive Manufacturing of Very Small Nozzles5
Tolerance Design of Multistage Aero-Engine Casing Assembly by Vibration Characteristic Evaluation5
Wake Modification and Noise Emission of Serrated NACA 65(12)-10 at Moderate Reynolds Number5
Nonablative Dual-Jet Strategy for Drag and Heat Reduction of Hypersonic Blunt Vehicles5
Stability of a Tapered, Pretwisted, and Rotating Sandwich Beam under Temperature Gradient5
Design of Supercritical Low-Reynolds-Number Airfoils for Fixed-Wing Flight on Mars5
Evaluation of Aeroacoustic Performance of a Helmholtz Resonator System with Different Resonator Cavity Shapes in the Presence of a Grazing Flow5
Two-Scale Topology Optimization of the 3D Plant-Inspired Adaptive Cellular Structures for Morphing Applications5
Aerodynamic Nonlinearity of Piston Theory in Surface Vibration5
Optimized Placement of Piezoelectric Actuator for Multichannel Adaptive Vibration Control of a Stiffened Plate5
Effects of Ice Surface and Ice Shape on Aerodynamic Characteristics of Crescent-Shaped Iced Conductors5
Adaptive Fault Tolerant Attitude Control of a Nano-Satellite with Three Magnetorquers and One Reaction Wheel5
3D Profile Reconstruction and Guidance for the Terminal Area Energy Management Phase of an Unpowered RLV with Aerosurface Failure5
A Galilean Invariant Variable–Based RANS Closure Model for Bypass and Laminar Separation Bubble–Induced Transition5
Active Vibration Control of Time-Varying Structural Systems with a Logic FxLMS Algorithm5
Adaptive Control of an Aerospace Electrohydrostatic Actuator with a Constant-Torque Variable-Displacement Pump5
Composite Adaptive Control and Identification of MIMO Aeroelastic System with Enhanced Parameter Excitation5
Flow Characteristics over Double Delta Wings at Low Reynolds Numbers5
Improved Electrodynamic Particle-Size Sorting System for Lunar Regolith4
Impact of Ground Proximity on an Inverted Delta Wing4
Dynamics of Tethered-Coulomb Formation for Debris Deorbiting in Geosynchronous Orbit4
Integrated Thermal Protection System Design for Hypersonic Vehicle Based on New Thermal–Mechanical Method4
Aeroelastic Stability and Nonlinear Flutter Analysis of Heated Panel with Temperature-Dependent Material Properties4
Projectile Shape Effects in Hypervelocity Impact of Honeycomb-Core Sandwich Structures4
Stress-Level Buffeting Analysis and Wind Turbulence Intensity Effects on Fatigue Damage of Long-Span Bridges4
Nonlinear Control of Aircraft Flight Dynamics Using Integrator-Backstepping Design Method4
Experimental Study of Far-Field Aerodynamic Noise Characteristics of Serrated Slat4
Generalized Scaling Analysis of the Separation Zone Induced by Shock Wave–Turbulent Boundary Layer Interactions4
Surrogate Model–Based Robust Multidisciplinary Design Optimization of an Unmanned Aerial Vehicle4
Guided Wave Excitation and Sensing in Constant Irregular Cross Section Structures with the Semianalytical Finite-Element Method4
Solutions to Planar Aircraft Perching Problem Utilizing Sideslip Maneuvering4
Multiple Spacecraft Formation and Station-Keeping Control in Presence of Static Attitude Constraint via Decentralized Virtual Structure Approach4
Assessment of Inverse Hyperbolic Zigzag Theory for Hygro-Thermomechanical Analysis of Laminated Composite and Sandwich Plates4
Surface Roughness Effects on Unsteady Transition Property over a Pitching Airfoil4
Aerothermodynamic Assessment of Spiked Configuration for Drag Reduction at Hypersonic Speeds4
Conversion Flight Control for Tilt Rotor Aircraft Using Nonlinear Time-Varying Perspective4
Vertical Transport of Lunar Regolith and Ice Particles Using Electrodynamic Traveling Wave4
Aerodynamic Design Optimization of a Staggered Rotors Octocopter Based on Surrogate Model4
Real-Time Autonomous Obstacle Avoidance for Fixed-Wing UAVs Using a Dynamic Model4
Downrange Estimation Based on Powered Explicit Guidance for Pinpoint Lunar Landing4
Transient Vibratory Response of Turbofan Engine Rotor Impacted by Bird Strike4
Neighboring Optimal Guidance and Attitude Control of Low-Thrust Earth Orbit Transfers4
Aeroelastic Damping Estimation for a Flexible High-Aspect-Ratio Wing4
Fault-Tolerant Model-Free Predictive Control of Spacecraft Coupled Rotational–Translational Relative Motion4
Start Limits and Positive Control of RBCC Inlet4
Novel Design of Wing Leading Edge against Birdstrike4
Damage Detection of Epoxied Joint Model in Precast Concrete Segmental Bridges Using PZT Technology4
Development of Ionic Wind Pump Used in Martian Environment4
Adaptive Robust Minimum Error Entropy Unscented Kalman Filter for Satellite Attitude Estimation4
Parametric Effect of Blade Surface Blowing on the Reduction of Rotor Blade–Vortex Interaction Noise4
Experimental Study of Modal Characteristics for Heated Composite Structures4
Nonlinear Control of a Novel Class of Tilt-Rotor Quadcopters Using Sliding Mode Method: Theory and Hardware Implementation4
Point-Based Mesoscopic Modeling and Simulation for Two-Step 3D Braided Composites4
Adaptive Backstepping Attitude Control for Liquid-Filled Spacecraft without Angular Velocity Measurement4
Aerodynamic Reduced-Order Model of Shape-Change Blade Subjected to Upstream Wake4
Nonuniform Clearance Effects on Windage Heating and Swirl Development in Straight-Through Labyrinth Seals3
Experimental Study of Ground Effect on Horizontal Tail Effectiveness of a Conceptual Advanced Jet Trainer3
Modeling of Biaxial Compression Behavior of Carbon Fiber–Reinforced Composite after Low-Velocity Impact3
Wing Flutter Suppression under the Influence of Fuel Sloshing in External Tank3
Honeycomb Parameter-Sensitive Predictive Models for Ballistic Limit of Spacecraft Sandwich Panels Subjected to Hypervelocity Impact at Normal Incidence3
Numerical Investigations for Passive and Active Flow Control on Tiltrotor–Wing Aerodynamic Interactions3
Experimental Validation of Positive Adaptive-Control Approach for Spacecraft Proximity Maneuvers3
Sliding Mode Lateral Guidance and Control of Finless Airship3
Effect of a Variable-Bend Slat on Tones Due to the Cove’s Self-Excited Oscillation3
Flow Structures of Wishbone Vortex Generators and Their Interactions with a Backward-Facing Ramp3
Wind Tunnel Investigations of Aeroelastic Electricity Transmission Tower under Synoptic and Typhoon Winds3
Passive Control of Vortex Shedding Noise of Circular Cylinders by Passive Air-Jet Blowing3
Global Nonlinear Aerodynamic Reduced-Order Modeling and Parameter Estimation by Radial Basis Functions3
Identifying Distributed Dynamic Loading in One Spatial Dimension Based on Combing Wavelet Decomposition and Kalman Filter with Unknown Input3
Aeroelastic Wind Tunnel Testing on the Wind-Induced Dynamic Reaction Response of Transmission Line3
New Flow Control Techniques with Prepositioned Stationary or Vibrating Elliptical Wing at Low Speed and High Angle of Attack3
Application of LS-DYNA Constitutive Material Model Laws to Simulate Low Velocity Impact Damage to Composite Plates3
Analyzing Interaction Noise from a Small Contra-Rotating Fan Enclosed with Lined and Unlined Casings3
Thermal Stability Analysis of Three-Phase CNTRFC Cylindrical Shell Panels3
Aerodynamic Interference and Reynolds Number Effects of Low-Speed Close-Coupled Biplanes3
Influence of Local Delamination on Assembly Variation Modeling of Laminated Composite Beams3
Halo Orbit Maintenance around L1 Point of the Sun-Earth System Using Optimal Control and Lyapunov Stability Theory3
Research on an Adaptive Threshold Setting Method for Aero-Engine Fault Detection Based on KDE-EWMA3
Preliminary Experimental Investigation of Loading Sequence Effects on Low-Cycle Bending Fatigue3
Lunar Production System for Extracting Oxygen from Regolith3
Parametric Study on Influence of an Array of Air Jets on the Performance of Supersonic Air Intake by Varying the Jet Injection and Back Pressure3
Computational Multiscale Analysis of the Mechanical Behavior of Radially Grown Carbon Nanotube Architecture3
Influence Factors of Honeycomb Seal Performance and Stability Analysis of Rotor System3
A Comparative Study of DWT and EEMD Methods for Validation and Correction of Pyroshock Data3
Ballistic Impact of Flat-Ended Projectiles against 2024-T351 Plate: Experiments and Modeling3
Experimental and Analytical Analysis of Rotor-Wing Interaction in Hover for Low Reynolds Number Flow3
Atomistic Simulation of Short Crack Growth in Correlation with Fatigue Indicator Parameter3
Adaptive Air-Data Estimation in Wind Disturbance Based on Flight Data3
Rhombic Laminates with Mass Variations under Dual-Axis Compression3
Experimental Evaluation of Different Microturbojet EGT Modeling Approaches3
Experimental Investigation of Near-Field Aeroacoustic Characteristics of a Pre- and Post-Stall NACA 65-410 Airfoil3
Some Insights into the Screech Tone of Under-Expanded Supersonic Jets Using Dynamic Mode Decomposition3
Modified Empirical Model of Surface Dielectric Barrier Discharge Plasma Actuator in Flow Control3
Parametric Study of Truncated Square Pyramid Folded Structure for Effective Energy Absorption under Static and Dynamic Crushing3
Experimental and Numerical Investigations of Modified Synthetic Jet Actuator for Active Flow Control3
On-Site Measured Gust Response Factors of Transmission Towers Based on SHM System3
Multistage Liquid Rocket Weight Estimation and Optimization for Early Design Stages3
Real-Time and Highly Accurate Solar Spectrum Velocimetry Using the Mirror NDFT-CS for Doppler Navigation3
Predicting Spatial Distributions of Lighthill’s Aeroacoustic Source Terms Using Steady-State RANS Simulations in Turbocharger Compressors3
Star Centroid Positioning Error Correction Aided by Gyroscope Output in INS and CNS3
High-Dimensional Multiobjective Optimization of an Aeroengine Combustor Based on Cubic Polynomial3
Wind Tunnel Model Design and Aeroelastic Measurements of the RIBES Wing3
Early Onset Prediction for Rotors in Vortex Ring State3
A Turboshaft Aeroengine Fault Detection Method Based on One-Class Support Vector Machine and Transfer Learning3
Numerical Study on the Effect of Vortex Generators on S-Shaped Intake in Propeller Slipstream3
Learning Mappings from Iced Airfoils to Aerodynamic Coefficients Using a Deep Operator Network3
Lamb Wave–Based Structural Health Monitoring for Aluminum Bolted Joints with Multiple-Site Fatigue Damage2
Physically Based Constitutive Model for Viscoplastic Deformation of Inconel718 at High Strain Rates and Temperatures2
Test and Simulation of Horizontal Tail Leading Edge Impacted by Bird2
Experimental Study on the Durability of China’s Mars Rover’s Mobility System2
Novel Radial Basis Function Network Based on Dynamic Time Warping and Kalman Filter for Real-Time Monitoring of Supersonic Inlet Flow Patterns2
Optimal Deployment of Heterogeneous Microsatellite Constellation Based on Kuhn-Munkres and Simulated Annealing Algorithms2
Transverse Forcing on Supersonic, Spatially Evolving Mixing Layers2
An Integrated Tracking Control Approach Based on Reinforcement Learning for a Continuum Robot in Space Capture Missions2
Motion Capability Optimization of Space Manipulators with Free-Swinging Joint Failure2
Improved Electromechanical Response in Laminated Piezoelectric Plates Using a Zigzag Theory2
Characterization of Nonlinear Birchwood Model with Strain Rate Effect2
Performance Optimization of Forward-Flight and Lift-Up Phases in a Cycloidal Rotor Using an Active Control Mechanism2
Influence of the Upstream Wakes on the Boundary Layer of a High-Lift Low-Pressure Turbine at Positive Incidence2
Preliminary Study on Mixing Mechanism of Three-Dimensional Vortices in the Wake of Lobe-Type Rear Variable Area Bypass Injector2
Minimum Weight Optimal Design of Truss Structure with Frequency Response Function Constraint2
Satellite Constellation Reconfiguration Using Surrogate-Based Optimization2
Experimental Investigation of Tip Vortex Formation Noise Produced by Wall-Mounted Finite Airfoils2
Improved Aerodynamic Analysis for Multirotor-Type UAS Flight Simulation Using Dynamic Inflow and Rigid Blade Flapping2
Impact Behaviors of Sandwich Composites Produced by Liquid Resin Infusion: Influences of the Process Parameters2
Hydrostatic and Cyclic Pressure Testing of Small-Scale Composite Pipes and Vessels2
Numerical Investigation on Mechanism of External Flow Field–Induced Separation Pattern Transition2
Aerodynamic Optimization and Noise Reduction of a Two-Stage Series Compact Fan2
Effect of Microstructures and Defects on Dynamic Compression and Shear Performance of Laser Metal—Deposited GH4169 Superalloy2
Experimental and Numerical Research on a Three-Dimensional Inward-Turning Inlet2
Hybrid Modeling Method for the Complex Radiative Cooling Network in the Chinese Space Station2
Evaluation of Bosch Process–Sourced Carbon in Low-Carbon Steel and Gray Iron Casting for Martian Surface Manufacturing2
Research on Asteroid Landing with a New Flexible Spacecraft2
Improved Electrostatic Precipitator in Martian Environment2
Flight Dynamics Modeling, Trim, Stability, and Controllability of Coaxial Compound Helicopters2
Constitutive Behavior and Ballistic Performance of Aerospace 2A16 Aluminum Alloy under Different Impact Velocities2
Active Flutter Suppression for a T-Tail via Optimal Control2
Koopman Operator-Based Data-Driven Identification of Tethered Subsatellite Deployment Dynamics2
Time-Dependent Deformation and Fracture Behavior of Fiber-Reinforced Ceramic-Matrix Composites under Stress-Rupture Loading at Intermediate Temperature2
Kinetic Particle Simulations of Plasma and Dust Environments at Robotic Construction Sites near the Lunar Terminator2
Uncertainty Analysis of the Dynamic Responses of a Transmission Tower-Line System Subjected to Cable Rupture2
Attitude Stability Analysis and Configuration Design of Pyramid Drag Sail for Deorbit Missions2
Unsteady Aerodynamic Modeling and Analysis of Load Distribution for Helicopter Rotor Blades2
Behaviors of Hypersonic Wing under Aerodynamic Heating2
Modeling and Adaptive Control Law Design for a Bi-Tiltrotor Unmanned Aerial Vehicle2
Stability Improvement of a High-Pressure Ratio Centrifugal Compressor by Flow Injection2
Bifurcation Characteristics of Emergency Extension of a Landing Gear Mechanism Considering Aerodynamic Effect2
RocketPy: Six Degree-of-Freedom Rocket Trajectory Simulator2
Particle-Size Classification of Lunar Regolith through Inclined Vibrating Tube2
Adaptive Dynamic Surface Control for Attitude Tracking of Spacecraft under Measurement Biases2
Computational Evaluation of Aero-Thermodynamic Loads and Effect of Catalyticity in an Arc-Jet Wind Tunnel2
State-Input System Identification of Tall Buildings under Unknown Seismic Excitations Based on Modal Kalman Filter with Unknown Input2
Exceedance Probability Assessment of Pedestrian Wind Environment Based on Multiscale Coupling Numerical Simulation2
Influence of Buffer Substance on Separation Mechanism of CFRP-Based Separation Devices with Shaped Charges2
Handheld Cleaning Tool for Lunar Dust Adhered to Spacesuits Using Magnetic and Electrodynamic Forces2
Direct Folding Method of Cylindrical Airbag and Its Application in Landing Buffer2
0.044023036956787