International Journal of Prosthodontics

Article	Citations
Effect of Aging on the Load to Failure of Molar Implant-Supported Monolithic Zirconia Crowns: A Laboratory Study	40
Influences of Different Torques on the Size of the Microgap and Bacterial Leakage in Different Implant Systems: An In-vitro Study	35
Effects of Overnight Denture Cleaners on Surface and Optical Properties of Conventional, CAD/CAM Milled, and 3D Printed Dentures	27
Effect of Aging on Fracture Load and Reliability of Cemented Glass-Ceramics	24
Human Gingival Fibroblast Proliferation on Materials Used for Dental Implant Abutments: A Systematic Review	20
Impact of CAD/CAM Material and Bonding Protocol on the Bond Strength Between Denture Bases and Artificial Teeth: A Systematic Review and Meta-analysis	19
Editorial: Press Release from Paris, October 16, 2023: The EAO and the AO Launch the Osseo Alliance	18
Binary Logistic Regression Analysis on the Association of Occlusion with the Temporomandibular Joint Arthralgia in the Partial Denture Wearers—A Retrospective Study	18
Primary Exploration of the Clinical Application of 3D-Printed Complete Dentures	17
Trueness of One Stationary and Two Mobile Systems for Three-Dimensional Facial Scanning	17
Influence of Viewing Distance on Visual Color Differentiation In Vitro	17
Monolithic- and Partially Veneered High-Translucent Zirconium Dioxide (Ysz), A 4-Year Follow-Up of a Multicenter Prospective, Randomized Controlled Trial on Posterior Fdps	16
Does Clinical Experience Affect Chairside Digital Waxing of Single Crowns More Than Software Training?	16
Correlation Between the Tragus-Incisal Distance and Interocclusal Rest Distance	15
Nonthermal Plasma Treatment Can Eliminate Sandblasting Procedure For Zirconia–Resin Cement Bonding	15
Update on the Accuracy of Digital Implant Impressions in 2023: A Coordinate-Based Analysis	15
Mechanical Properties of Zirconia Materials with Different Translucency: An In Vitro Study	15
Rehabilitation of Ectodermal Dysplasia Patients Presenting with Hypodontia: Outcomes of Implant Rehabilitation: Part 2: Two Cases	15
Immediate Loading of 3-Unit Posterior Fixed Dental Prostheses on 3 Vs 2 Implants, Comparison and Evaluation with up to 10-Year Follow-up	14
Editorial: New Section—EAO Position Papers	14
Esthetic Printed Rim with Anterior Deprogrammer for Implant-Supported Full-Arch Rehabilitations: A Case Report	14
Retention Strength of Zirconia Crowns Cemented onto PEEK Abutments Using Two Different Types of Resin Cement With or Without Primer Application–An In Vitro Study	13
Comparative Evaluation of Load-Bearing Capacity and Fracture Analysis of PEEK and Zirconia Three-Unit Fixed Dental Prostheses: An In Vitro Study	13
Zirconia Restorations Cemented onto Nonoriginal Titanium Bases May Result in Increased Bleeding on Probing, Probing Depth Values, and Varying Mean Marginal Bone Levels	13
Laboratory Evaluation of Production Efficiency for Removable Partial Denture Frameworks Using In-House Casting vs Outsourced Additive Manufacturing Techniques	12

Effect of Different Milling Devices on Marginal Fit of CAD/CAM Zirconia Copings on Implant Stock Abutments	12
In-Vitro Accuracy of Digital Versus Conventional Workflows for Complete Arch Implant Supported Frameworks – A Scoping Review	12
The Influence of Ferrule on the Marginal Gap and Fracture Resistance of Zirconia Endocrowns	11
A Pilot Study to Predict Lifetime of Resin-Based Materials for Denture: Presentation of an In Vitro Thermally-Accelerated Ageing Method	11
Accuracy of Virtual Static Articulation: A Systematic Review	11
Digitally Fabricated Provisional Implant Restorations Prior to Implant Placement: A Clinical Case Series	11
IN VITRO SURVIVAL AND FRACTURE FORCE OF LITHIUM DISILICATE HYBRID ABUTMENT CROWNS	11
Influence of a Novel Lithium Disilicate Coating on Composite-Zirconia Bonding and Bond Characterization	10
Effect of Cantilever Extension on Bone Loss in Mandibular Complete-Arch Implant-Supported Fixed Prostheses with Three and Four Implants	10
Which Patient-Related Factors Influence the Outcome of Telescopic-Retained Removable Implant-Supported Dental Prostheses in Edentulous Patients?	10
Clinical and Microbiologic Outcomes of Ceramic Laminate Veneers Bonded to Teeth Without a Finish Line: 1-year Results of a Prospective Study	10
Evaluation of Prosthetic Complications with Metal-Acrylic Resin Implant-Fixed Complete Dentures: A Medium- and Long-Term Retrospective Analysis with Up to 13 Years of Follow-up	9
Retrospective Evaluation of Factors Affecting Long-Term Clinical Performance of CAD/CAM Laminate Veneers	9
Benefits of Contemporary Rehabilitation of Edentulism: A Statement	9
Rationale for a Novel Attachment System for Implant-Supported Overdentures	9
Effect of Food-Simulating Liquids on Hydrolytic Behavior of Resin Matrix Ceramics	9
A Randomized Clinical Trial of Monolithic Single-Tooth Crowns: 1-Year Preliminary Results	9
Comparison of Accuracy of Fit of Three-Unit Fixed Ceramic Cobalt-Chromium Dental Prostheses Fabricated by Three Different Techniques	9
Influence of Blowing Musical Instruments on Geometrical Face Changes: 3D Evaluation Study	9
Vertical Deviation Caused by Tightening Torque on Implant Scan Body: An In Vitro Study	8
The International Journal of Prosthodontics	8
Effect of Utilizing Cheek Retractors on Patient Satisfaction and Trueness of Peripheral Borders in Maxillary Digital Scans for Totally Edentulous Patients: An In Vivo Study	8
In Vitro Comparison Between Complete-Arch Implant Supported Frameworks Using Intraoral Scanning and Photogrammetry	8
Fracture Load of Veneered and Monolithic Single-Unit Fixed Dental Prostheses Made from the High-Performance Thermoplastic Polyphenylene Sulfone	8
Evaluation of Surface Roughness and Wear Resistance of Additively and Subtractively Manufactured CAD-CAM Dental Materials: An In Vitro Study	8
Self-Assessment of Hungarian Dentists Regarding Removable Partial Denture Design and Communication with the Dental Technician	8
Comparison of the Retention of Conventional and Polyvinyl Siloxane Matrix Materials with Different Patrices for Implant-Retained Overdentures: An In Vitro Study	8
Lemongrass-Incorporated Tissue Conditioner with Adjustable Inhibitory Effect Against Candida albicans: An In Vitro Study	8
Effects of Various Laser Treatments on Surface Characterization and Repair Bond Strength of Zirconia-Reinforced Lithium Silicate Ceramics	8
Effect of Sintering Speed and Polishing or Glazing on the Failure Load of Monolithic Zirconia Fixed Partial Dentures	8
Effect of Hydrothermal Aging on the Flexural Strength and Microhardness of Materials Used for Additive or Subtractive Manufacturing of Definitive Restorations	7
Impact Strength of 3D-Printed and Conventional Heat-Cure and Cold-Cure Denture Base Acrylic Resins	7
Effect of Thermomechanical Fatigue Loading on the Internal and Marginal Adaptation of Endocrowns Utilizing Different CAD/CAM Restorative Materials	7
Impact of High-Speed Sintering on Accuracy and Fit of 4 mol% Yttria-Stabilized Tetragonal Zirconia Polycrystals	7
Interdisciplinary Rehabilitation Using CAD/CAM Technology for a Young Patient with Severe Malocclusion and Amelogenesis Imperfecta: A 5-Year Follow-up Case Report	7
Factors Affecting Clinical Decision-Making Among Dentists and Dental Students: A Crosssectional Study	7
Food Solutions and Cigarette Smoke—Dependent Changes in Color and Surface Texture of CAD/CAM Composite Resins—An In Vitro Study	7
Effect of Food-Simulating Liquids on the Mechanical Properties of 3D-Printed Provisional Restoration Materials	7
The Effect of Denture Cleansers on the Surface Roughness of Heat-Polymerized Denture Base Resins Polished by Three Different Techniques	6
A Total of 1,132 All-Ceramic Single-Tooth Restorations Show Acceptable Survival Rates up to 15 Years in a Non-University Setting	6
Comparative Mechanical Testing for Digitally Produced Provisional Fixed Partial Dentures vs the Conventional Method: An In Vitro Study	6
Complications and Patient Satisfaction in Fully Edentulous Patients Treated with a Digital and Conventional Complete Denture, A Cross-Over Clinical Study	6
Retrospective Clinical Study of Minimally Invasive Full-Mouth Rehabilitations of Patients with Erosions and/or Abrasions Following the 3-Step Technique. Part 1: 6-year Survival Rates and Technical Out	6
Laser Retrieval of Cemented Zirconia Single- Unit Implant Restoration: A Pilot Study, Part I. Force Values	6
Postoperative Rehabilitation with a CAD/CAM-fabricated Occlusal Splint Following Plate Reconstruction after Hemimandibulectomy and Condylectomy: A Case Report	6
Comparative Study of Chemical and Mechanical Surface Treatment Effects on Shear Bond Strength of PEEK to Veneering Ceramic	6
Evaluation of Accuracy and Position of Milled and 3D-Printed Teeth in Digital Complete Dentures	6
Impact of Finishing Protocol on the Color Stability of CAD/CAM Ceramics: A Systematic Review	6
Mechanical Stability of Zirconia Implant Abutments Supporting Cantilevered Fixed Dental Prostheses After Fatigue Loading	6
The Journey of Additive Manufacturing in Prosthodontics from the Early Dawn till the Current State of Art. A Narrative Review	6

A Completely Digital Workflow for Nanoceramic Endocrowns: A 5-Year Prospective Study	5
Ceramic Printing— Comparative Study of the Flexural Strength of 3D-Printed and Milled Zirconia	5
Editorial: Dental Ceramics: From Science and Technology to Clinical Application	5
Color stability of pressed lithium disilicate ceramics under repeated firings evaluated by different methods	5
Influence of Implant ScanBody Material and Intraoral Scanners on the Accuracy of Complete-Arch Digital Implant Impressions	5
In Vitro Comparison of Surface Characteristics and Bacterial Adhesion in Composite Resin-Based Materials for Additive, Subtractive, and Conventional Manufacturing	5
Comparative Evaluation of the Reproductive Trueness of Zirconia Crowns Fabricated Using Additive Manufacturing and Conventional Milling	5
Influence of Maxillary Anterior Tooth Restoration Labial Thickness on Labial Soft Tissue in Young Asian People	5
Reference CAD-CAM Samples for Dental Shade Communication for Successful Aesthetic Outcome	5
Trueness Evaluation of Latest Generation of Intraoral Scanners on Complete-Arch Implant Impressions	5
Facial Scanner Accuracy with Different Superimposition Methods: An In Vivo Study	5
Working Models in the Digital Workflow: Are They Reliable?	5
Narrow-Diameter Implants for Partial Fixed and Removable Prostheses: A Systematic Review and Meta-Analysis	5
Accuracy of Indirect Veneer Mock-Up in Comparison to Diagnostic Wax-Up	5
Effect of Different Universal Bonding Agent Procedures on Repair of Feldspathic and Hybrid Ceramics	5
Occlusal veneers and load-bearing capacity of a restored tooth	4
Static analysis with a realistic loading condition on all-ceramic crown prosthesis during chewing	4
Load to Failure of High-Density Polymers for Implant-Supported Fixed Cantilevered Prostheses with Titanium Bases	4
Current Concepts for the Treatment of Peri-implant Disease	4
Digital Impressions in Edentulous Patients: A Systematic Review for Clinical Evidence	4
Effect of Different Concentrations of Nano Hydroxyapatite on the Microshear Bond Strength of Zirconia to Resin Cement	4
Fixed Dental Prostheses on Six Zirconia Implants for an Anterior Maxillary Rehabilitation: Case Report with 10-Year Follow-up	4
Digital Gothic Arch Tracing Device with Open- Source Software for CAD/CAM Denture Fabrication	4
Finite Element Analysis of Stress Distributions for Mandibular Dental Implant-Supported Overdentures with Magnetic Attachments in Osteoporotic and Normal Bone	4
Influence of Different Material Substrates on the Accuracy of Three Intraoral Scanners: A Single-Blinded In Vitro Study	4
Mode of Bond Failure Between 3D-Printed Denture Teeth and Printed Resin Base Material: Effect of Fabrication Technique and Dynamic Loading. An In Vitro Study	4
Maxillary "All-on-six" treatment using zygomatic implants. Bone loss evaluation by cone beam computed tomography; Three years' follow-up	4
What Is the Best Tooth-Supported Attachment System for Distal-Extension Removable Partial Dentures? A Systematic Review with Meta-analysis	4
Effect of Aging on the Mechanical Properties of CAD/CAM–Milled and 3D-Printed Acrylic Resins for Denture Bases	4
Editorial: Leading Through Crisis: Reflections from the Helm of an International Professional Organization	4
Oral prosthetic rehabilitation in patients with Epidermolysis Bullosa Hereditaria: a systematic review	4
Analysis of Topography, Flexural Strength, and Microstructure of a Lithium Disilicate Glass- Ceramic after Surface Finishing	4
Dental Implant Positioning Accuracy Using a Key or Keyless Static Fully Guided Surgical System: A Prospective Systematic Review and Meta-analysis	4
Malpositioned Implant in the Esthetic Area: The Peri-Implant Plastic Surgery and Angulated Welded Abutment Approach	3
Patient-Reported Outcomes on Different Occlusal Schemes in Complete Denture Wearers	3
Digital Workflow for Rehabilitation of Severely Discolored Teeth Due to Red Staining from Endodontic Material	3
Influence of Thickness and Thermocycling on Tensile Strength of Two Resin-Based Cements Used for Overdenture Bar-Type Attachments: An In Vitro Study	3
Is There "A Best" Centric Relation Record? Centric Relation Records, Condyle Positions, and Their Practical Significance	3
Risk Factor Assessment for Survival of Removable Partial Dentures and Their Abutment Teeth: A Retrospective Analysis	3
The Accuracy of Full-Arch Intraoral Optical Impressions (IOS): Clinical Pilot Study of the Influence of the Scan Strategy, Operator, and Intraoral Scanner	3
Comparison of Retention Between Different Duplication Techniques: Conventional Versus CAD/CAM: A Within Subject Controlled Clinical Trial	3
Introducing Our New Editors	3
Efficiency of Diamond Rotary Instruments in Cutting Through Zirconia and Lithium Disilicate Restorations	3
Assessing Personality Risks profile in Prosthodontics Patients: A Delphi-Driven Classification Approach	3
Randomized Trial in Split-Mouth Design to Evaluate the Effectiveness of Manual and Machine-Aided Cleaning of Removable Partial Dentures	3
Evaluating the Accuracy of Dental Restorations Manufactured by Two CAD/CAM Milling Systems and Their Prototypes Fabricated by 3D Printing Methods: An In Vitro Study	3
Electromyographic Activity of Masseter Muscles After Complete Denture Rehabilitation in Edentulous Participants	3
Fit and Fracture Load of Milled and 3D Printed Composite Onlays, an In Vitro Study	3
Are Monolithic 3Y-TZP Zirconia Crowns Too Strong for Titanium Implants?	3
Evaluation of the Accuracy of Different Intraoral Scanners in Endocrown Restorations	3
Nonadaptation to New Mandibular Complete Dentures: A Survival Analysis and Interpretation of the Time to Adaptation	3
EAO Position Paper: Current Level of Evidence Regarding Zirconia Implants in Clinical Trials	3
Zirconia Minimally Invasive Partial Retainer Fixed Dental Prostheses: Up to 10-Year Follow-up	3
Evaluation of Masticatory Function, Satisfaction, and Quality of Life Among Users of Complete Dentures Relined with Resilient Materials: A Systematic Review	3
In Vitro Mastication Simulation and Wear Test of Virgilite and Advanced Lithium Disilicate Ceramics	3
Quality and Readability Assessment of Internet-Based Information on Common Prosthodontic Treatments	3
Accuracy of Recording Edentulous Arch Relations Using an Optical Jaw-Tracking System: An In Vitro Study	3
A Randomized Clinical Trial Comparing the Clinical Fit of CAD/CAM Monolithic Zirconia Fixed Dental Prostheses on Ti-Base Abutments Based on Digital or Conventional Impression Techniques: 1-Year Follow	3
Clinical Applications of 3D-Printed Polymers in Dentistry: A Scoping Review	3
Stress Distribution on Mucosa Soft Tissue of Alveolar Ridge at the Dislocation of BPS: A Three-Dimensional Finite Element Analysis	3
Metal-Ceramic Resin-Bonded Fixed Partial Dentures After a Mean Observation Time of 7.5 Years	3
Stresses in Premolars Restored Using Different Post-and-Core and Crown Materials: An FEA Study	3
Facially Driven Rehabilitation of a Cleft Lip and Palate Patient with an Implant-Supported Complete Fixed Dental Prosthesis: Outcome of a Multidisciplinary Approach	2
Biomechanical Behavior of a 3D-Printed Denture Base Material	2
Comparison of Face Anthropometry and Digital 2D-Face Photogrammetry as Methods for Predicting Vertical Dimension of Occlusion	2
Milled PMMA: A Material for Long-Term Implant-Supported Fixed Complete Dental Prostheses	2
Fracture Resistance of Screw-Access Holes in Zirconia Full-Arch Implants	2
Fracture Strength of Six-Unit Anterior Fixed Provisional Restorations Fabricated Using Various Dental CAD/CAM Systems	2
Impact of Removable Partial Dentures on Masticatory Performance in Partial Edentulism: A Systematic Review	2
Esthetic Evaluation of Anterior Implant-Supported Single Crowns: A Comparison Between Patients and Dentists	2
Influence of Dentin Bonding and Interfacial Adhesion on the Flexural Properties of a 4 Mol% Yttria Partially Stabilized Zirconia	2
Load-Bearing Capacity of All-Ceramic Fixed Partial Dentures - Do In Vitro Tests Overestimate Strength?	2
Effect of Tooth Brushing Cycles and Dentifrice Fluoride Concentration on a Glazed CAD/CAM Ceramic	2
Clinical Outcomes of Tooth- and Implant- Supported Restorations Performed in a University-Based Undergraduate Program After 13 to 15 Years	2
Monomer Elution of Additive and Subtractive Manufactured Resins for Permanent Restorations	2
Pull-Off Behavior of Hand-Cast, Thermoformed, Milled, and 3D-Printed Splints	2
Long-Term Peri-Implant Health and Papilla Formation at Healed Sites by Chairside Provisionalization of Single-Tooth Implants: A Prospective Case Series	2
TEMPOROMANDIBULAR DISORDER, BODY PAIN, AND OTOLOGIC AND PSYCHOLOGIC SYMPTOMS: THEIR INTERRELATIONSHIPS IN ASIAN YOUTHS	2
Comparative Evaluation of Osteocalcin in Peri-implant Crevicular Fluid and Radiographic Bone Loss in Immediate Loading and Delayed Loading Protocols: A Preliminary Split-Mouth Randomized Controlled Tr	2
Editorial: The 2021 Arthur R. Frechette Awards Competition of the IADR Prosthodontics Group	2

Ultrathin Ceramic Veneers in the Esthetic Zone: A 36-Month Retrospective Case Series	2
Biomechanical Analysis of One-Piece Postand- Core: High-Performance Polymers vs Conventional Materials	2
Neuromuscular Position of the TMJ Condyle in Fully Dentate Volunteers Characteristics and Potential Indications	2
Bacterial growth on titanium versus zirconia healing caps. An In vitro study	2
Influence of Stabilization Splint Thickness on Temporomandibular Disorders	2
Comparison of 3D-Printed Single Crown Outcomes Among Different Computer-Aided Design Software Programs	2
The Effects of Direct Polymethyl Methacrylate and Zirconia-on–Ti-Base Abutments on Peri-implant Soft Tissue Integration: A Study in Minipigs	2
Influence of Post Length, Post Material, and Substance Loss on the Fracture Resistance of Endodontically Treated Teeth: A Laboratory Study	2
TESTING OF ZIRCONIA FPD FRAMEWORKS FOR FIXED PROSTHESES: MODEL DESIGN AND EVALUATION OF FRACTURE LOAD	2
Fracture Resistance of 3D Printed Restorations in Different Thicknesses for Primary Molars	2
Evaluation with a Coordinate-Measuring Machine of Dimensional Accuracy of the Abutment Duplication Technique in Cement- Retained Implant Restoration	2
Performance of an Artificial Intelligence–Based Chatbot (ChatGPT) Answering the European Certification in Implant Dentistry Exam	2
Relative Amount of Tooth Structure Removal in Different Partial- and Full-Crown Preparation Designs	2
Assessing Decision-Making in Education of Restorative and Prosthetic Dentistry: A Pilot Study	2
Impact of Missing Teeth on Oral Health– Related Quality of Life: A Prospective Bicenter Clinical Trial	2
Effect of Hydrogen Peroxide–Based Bleaching Agents on the Color Dimensions and Surface Roughness of Different Milled Restorative Dental Materials	2
Thirty-Year Clinical Performance of Double-Crown Retained Removable Partial Dentures – A Practice Based Retrospective Study	2
Effect of Internal, Office, and Home Bleaching on Shear Bond Strength of Enamel to Porcelain Laminate Veneers	2
Intraoral Repair of Chipping Due to Cohesive Failure—Results of a Nationwide Survey Among Dentists in Germany	2
The Conometric Concept: definitive rehabilitation of single posterior implant using a friction retention abutment. A one-year follow-up report.	2
Fabrication Trueness, Intaglio Surface Adaptation, and Marginal Integrity of Resin-Based Onlay Restorations Fabricated by Additive and Subtractive Manufacturing	2
Psychosocial and Behavioral Impact of Three Clinical Presentations of Oligodontia in a Tertiary Hospital	2
Comparison of Heat Transfer Through Various Fixed Prosthetic Materials During Grinding	2
Sensitivity and Specificity of Capsules Containing Fuchsin-Based Beads for the Evaluation of Masticatory Performance	2
Shear Bond Strength of Five Different Repair Systems to Three Different Ceramic Materials	2
Dimensional Stability of Additively Manufactured Diagnostic Maxillary Casts Fabricated with Different Model Resins	2
Development of an Index for a Tooth to Receive a Full-Coverage Crown	2
Soft Loading Protocol of Short Strategic Implants in Posterior Mandibles Supporting Removable Bilateral Free-End Prostheses: 1-year Results of a Prospective Cohort Study	1
Effect of Simulated Gastric Acid on the Interface Between Zirconia and Resin Cement	1
Influence of the Manufacturing Trinomial (Technology, Printer, and Material) on the Marginal and Internal Discrepancies of Printed Metal Frameworks for the Fabrication of Tooth-Supported Prostheses: A	1
Clinical Validation of an Occlusal Force-based Implant Surgical Guide System: Enhanced Accuracy in Edentulous Patient Treatment with Negligible Positional Deviation	1
Effects of 3D-Printing Technology and Cement Type on the Fracture Resistance of Permanent Resin Crowns for Primary Teeth	1
Flexural Strength of Different Yttrium Oxide Containing Monochrome and Multilayer Partially Stabilized Zirconia upon Various Sintering Rates	1
Effect of Tooth Mobility on the Accuracy of Conventional Impressions: A Pilot Study	1
A Survey of Preferences for Ceramic Materials on Tooth-Supported Crowns Among Dental Practitioners in Chile	1
Frequency of Contamination on Used Healing Abutments after Sterilization: An In Vitro Study	1
Evaluation of the Accuracy and Adaptation of BioHPP Removable Partial Denture Frameworks Constructed by Milling vs the Pressing Technique	1
A Three-Dimensional Analysis of the Influence of Palatal Vault Depth on Digitization Accuracy of Partially Dentate Arches	1
Do Tooth Loss and Dentures Cause Body Image Disturbance?	1
Temporary 3D-Printed Fixed Dental Prosthesis Materials: Impact of Postprinting Cleaning Methods on Degree of Conversion and Surface and Mechanical Properties	1
A Comparison of Occlusal Schemes with Condylar Inclination and Anterior Guidance in Dentate Individuals	1
Accuracy and Reliability of Smartphone Virtual Shade-Matching Technique: An In Vitro Study	1
An Investigation of Stress Distribution Between Two Different Implant Concept in Implant-Supported Maxillary Prostheses with Different Framework Materials: A Finite Element Study	1
Monomer Release from 3D-Printed Crown Resin, Hybrid CAD/CAM Block, Bulk-Fill, Indirect, and Direct Composites in Resin-Based Posterior Restorations: An In Vitro Study	1
Psychological factors in Temporomandibular disorders and somatization: A multidimensional analysis of personality, coping, and distress among young adults.	1
Editorial: Latest News from the IJP Editorial Board	1
Effect of Tooth Mobility on the Accuracy of Conventional Impressions: A Pilot Study.	1
Exploring Digital Gingival Shade Matching in Students	1
Effect of acidic solutions on the surface roughness and microhardness of indirect restorative materials: A systematic review and meta-analysis	1
Evolution of Esthetic Publications in Dentistry, Research Trends, and Global Productivity: A Bibliometric Analysis	1
The Association of Sleep, Awake, or Combined Sleep/Awake Bruxism and Temporomandibular Disorders Subtypes: A Cross-Sectional Population Study	1
Three-Year Follow-up of a Randomized Clinical Trial on Screw-Retained Monolithic Zirconia Restorations on Ti-Base Abutments Based on Digital or Conventional Impression Techniques	1
Reliable Reference Areas for 3D Smiling Facial Model Alignment: Posed vs Natural Smile Expressions	1
3D EVALUATION OF MICROGAPS AT THE IMPLANT-ABUTMENT CONNECTION BEFORE AND AFTER THERMODYNAMIC CYCLING	1
Different Cavity Designs with Additional Wings Increase the Fracture Resistance of Inlay-Retained Monolithic Zirconia Fixed Dental Prostheses	1
Full-Arch Rehabilitation After Failure of Implants and Teeth Supporting an Extensive Fixed Dental Prosthesis: A Staged Approach	1
Influence of Cleaning Procedures and Aging on Shear-Bond- Strength of 3Y, 4Y, and 5Y Zirconia to Titanium	1
Tolerances in the Production of Six Different Implant Scan Bodies: A Comparative Study	1
Color Stability of PMMA Resins for Complete Denture Produced by CAD/CAM and 3D Printing Technologies: An In Vitro Study	1
Effects of Toothbrushing and Thermocycling on Color, Opalescence, Fluorescence, and Surface Analyses of Stained CAD-CAM Glass-ceramics and Zirconia	1
INFLUENCE OF CERAMIC MATERIALS AND PREPARATION DESIGNS ON THE MARGINAL ADAPTATION OF INLAYS AND ONLAYS AFTER THERMOCYCLING	1
Evaluation of Color and Translucency of Stained and Glazed Monolithic Lithium Disilicates and Zirconia After Toothbrushing with Different Dentifrices and Thermocycling	1
A Clinical Comparative Evaluation of the Wear of Enamel Antagonists Against Monolithic Zirconia and Metal-Ceramic Crowns	1
Finite Element Analysis of Endocrowns and Post-and-Core Abutments for Removable Partial Dentures with Different Framework Materials	1
Effects of Surface Treatments and Mouth Rinses on the Roughness and Color Stability of Interim Restorations Produced through Additive Manufacturing	1
Digital Workflow of Occlusal Rehabilitation in Partial Edentulism Based on Multifunctional Gothic Arch Tracing Devices: A Case Report	1
Maximum Fracture Load of Interim Crowns Fabricated by Additive and Subtractive Techniques	1
Factors Associated with Total Edentulism in Older Adults and Their Impact on the Self-Perception of Oral Health and Food	1
A Case-Control Split-Mouth Study of Comparison of Maximum Occlusal Forces in Endodontically Treated Teeth and Vital Counterparts	1
Bonding and Debonding of Zirconia Using Laser Approaches	1
Degree of Streptococcus mutans Colonization on Common Restorative Materials Subjected to Wear Cycle	1
Frequency of Locator Legacy Insert Changes With Implant Overdentures in a UK Population	1
Effect of Model Resin and Shaft Taper on the Trueness and Fit of Additively Manufactured Removable Dies in Narrow Ridge Models	1
Influence of Immediate Dentin Sealing on Marginal Gaps of Laminate Veneers: Machinable Monolithic Zirconia Versus Pressable Lithium Dislocate. An In Vitro Study	1
Finite Element Analysis of Occlusal Interferences in Dental Prosthetics Caused by Occlusal Adjustment	1
Up to 10-Year Incidence of Complications in Fixed vs Removable Implant-Supported Restorations for Edentulous Arches	1
Composite Restoration Design Effect During Curing and Chewing	1
Improving Fracture Resistance of 5Y-PSZ-based Three-unit Bridge Prosthesis	1
Comparison of the Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Four Different Computer-Aided Manufacturing Techniques	1
Comparative Evaluation of Masticatory Efficiency in Various Facial Forms of Dentate and Rehabilitated Complete Denture Patients	1
Replacement of Two Missing Adjacent Teeth with Two Single-Retainer Resin-Bonded Fixed Dental Prostheses with Improved Proximal Design	1
Distortion Assessment of Different Materials in Full-Arch Dentate Impressions in Relation to Operator Experience: A Comparative In Vivo Study	1
Influence of Polymerization Postprocessing Procedures on the Accuracy of Additively Manufactured Dental Model Material	1
Effect of Recycling Cobalt-Chromium Alloy Powder on Metal- Ceramic Bond Strength and Microstructure	1
Evaluation of the Mechanical Properties of 3D-Printed Post and Core Systems	1
The Effect of the Wall Thickness of 3D-Printed Obturator Bulbs on Masticatory Function in Patients with Aramany Class I Defects: A Randomized Crossover Clinical Trial	1
Feasibility of Immediate Implant Placement in Maxillary First Premolars: Prediction of Implant Locations Using Restorations— A Radiographic Study	1
Effect of Home Bleaching Agents on Color Stability and Surface Roughness of Hybrid Ceramics: An In Vitro Study	1
The Effect of Gastric Acid and Material Type on the Surface Roughness of Additive and Subtractive Manufacturing Resins	1