Journal of Petroleum Science and Engineering

Papers
(The median citation count of Journal of Petroleum Science and Engineering is 11. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-06-01 to 2025-06-01.)
ArticleCitations
Research on casing deformation mechanism and prevention measures based on micro-seismic signal distribution182
Creep microindentation of low-density oil well cement and the implication on radial cracking risk of cement sheath165
An integrated rock-mechanics tests and numerical modelling of chalk rocks: An improved integrated workflow for borehole safety164
Thermodynamic Characteristics of cold and hot non-condensable gases simultaneously flowing along vertical wellbore150
Experiments on the deterministic and non-deterministic effects of water inflow on sedimentary configurations during the lacustrine delta evolution145
3D numerical modeling of the effect of the drill string vibration cyclic loads on the wellbore natural fracture growth144
Permeability reduction by gellan gum solutions137
Seismic reservoir characterization of potential CO2 storage reservoir sandstones in Smeaheia area, Northern North Sea136
Effect of control flow on main jet switching for single and double feedback channels fluidic oscillator133
Three-dimensional transient flow in heterogeneous reservoirs: Integral transform solution of a generalized point-source problem122
Numerical and experimental analysis of vertically ascending swirling liquid film flow118
Sinusoidal buckling behaviour of surface casing with negative friction in thawing permafrost116
Unveiling the mechanisms of in-situ combustion of post-steam driven heavy oil by electric heating method induced auto-ignition112
Experimental measurements and mechanisms of selective hindrance of oil mixtures in Niobrara shale110
Accumulation characteristics and controlling factors of the Tugeerming gas reservoir in the eastern Kuqa Depression of the Tarim Basin, northwest China108
Performance and important engineering aspects of air injection assisted in situ upgrading process for heavy oil recovery105
Editorial Board96
Evaluation method for tooth wear of roller bits based on the fractal dimension of the rock surface96
Reproducing wettability in sandstone reservoir core material in laboratory core restorations94
Dynamic analysis of oil-water interface, taking Shunbei oilfield as an example94
Fully implicit and fully coupled numerical scheme for discrete fracture modeling of shale gas flow in deformable rock92
Lake basin evolution from early to Middle Permian and origin of Triassic Baikouquan oil in the western margin of Mahu Sag, Junggar Basin, China: Evidence from geochemistry90
A novel method to determine the thief zones in heavy oil reservoirs based on convolutional neural network88
Study of mechano-chemical effects on the morphology of hydraulic fractures87
Image processing and machine learning based cavings characterization and classification86
Investigation on influence of temperature and pressure on fatigue damage of subsea wellhead in deepwater drilling86
Experimental investigation of deterioration in mechanical properties of oil-based mud (OBM) contaminated API cement slurries & correlations for ultrasonic cement analysis85
A semi-analytical solution of finite-conductivity multi-wing fractured well in naturally fractured reservoirs by boundary element method83
Methane adsorption on shales and application of temperature-related composite models based on dual adsorption modes80
Automatic event identification and extraction from daily drilling reports using an expert system and artificial intelligence78
Structural characteristics and storage control function of the Shun I fault zone in the Shunbei region, Tarim Basin78
Production rate of multi-fractured wells modeled with Gaussian pressure transients77
Acoustic impedance and lithology-based reservoir porosity analysis using predictive machine learning algorithms73
A lattice Boltzmann simulation on the gas flow in fractal organic matter of shale gas reservoirs72
Experimental investigation on permeability, meso-damage and fractal characteristics of limestone caprock under THM coupling based on μCT technology71
Dew point pressure of gas condensates, modeling and a comprehensive review on literature data70
Effect of hydration on Pore Structure and Physical Properties of Permian Basalt and tuff in Sichuan Basin during pressurized imbibition70
Productivity model with mechanisms of multiple seepage in tight gas reservoir69
Diagenesis and controlling factors of Oligocene Huagang Formation tight sandstone reservoir in the south of Xihu sag, the East China Sea Shelf Basin69
Iterative sequential robust optimization of quantity and location of wells in field development under subsurface, operational and economic uncertainty68
Nondestructive investigation on hydrocarbons occluded in asphaltene matrix: The evidence from the dispersive solid-phase extraction67
Experimental study of the influence of the content of calcite and dolomite in the rock on the efficiency of acid treatment66
Hybrid modeling for submergence depth of the pumping well using stochastic configuration networks with random sampling65
Investigation of lithological heterogeneities from velocity logs using EMD-Hölder technique combined with multifractal analysis and unsupervised statistical methods65
Advanced understanding of gas flow and the Klinkenberg effect in nanoporous rocks64
Reduced well path parameterization for optimization problems through machine learning64
A coupled CFD-DEM numerical simulation of formation and evolution of sealing zones64
The combined effect of fluid rheology, inner pipe rotation and eccentricity on the flow of Newtonian and non-Newtonian fluid through the annuli64
Regulation of oil and gas reserves reporting in Saudi Arabia: Review and recommendations63
Catalytic effects of Al2O3 nano-particles on thermal cracking of heavy oil during in-situ combustion process63
An experimental study of the combination of smart water and silica nanoparticles to improve the recovery of asphaltenic oil from carbonate reservoirs63
Optimization on fracturing fluid flowback model after hydraulic fracturing in oil well62
Mineralogy, organic geochemistry, and microstructural characterization of lacustrine Shahejie Formation, Qikou Sag, Bohai Bay Basin: Contribution to understanding microcosmic storage mechanism of shal62
Improved wormhole prediction model considering propagation characteristics of wormhole head in carbonate acidizing62
Wellbore strengthening evaluation with core fracturing apparatus: An experimental and field test study based on preventive approach60
Pour point depressant efficacy as a function of paraffin chain-length60
Synthesis, interfacial activity and rheological properties of low interfacial tension viscoelastic Gemini surfactants60
Effect of oil/water ratio on rheological behavior, droplet size, zeta potential, long-term stability, and acid-induced demulsification of crude oil/water nanoemulsions59
Dynamic thermal aging of water-based drilling fluids with different types of low-rank coals as environmental friendly shear thinning additives59
Occurrence and origin of chlorite and associated impact on tight sandstone reservoir quality: A case study of the Xujiahe Formation (NE Sichuan Basin, China)57
Stability and conductivity of proppant packs during flowback in unconventional reservoirs: A CFD–DEM simulation study57
Brent and WTI oil prices volatility during major crises and Covid-1957
Fracture development and inter-well interference for shale gas production from the Wufeng-Longmaxi Formation in a gentle syncline area of Weirong shale gas field, southern Sichuan, China56
Triaxial experimental investigation into the characteristics of acid-etched fractures and acid fracturing56
Geochemistry and accumulation of Jurassic oil in the central Junggar Basin, western China56
Investigation of the interface cracks on the cement sheath stress in shale gas wells during hydraulic fracturing56
Effect of water occurrence on shale seepage ability55
Fracturing of shales with slots under uniaxial compression parallel to bedding layers55
A systematic research on spontaneous imbibition of surfactant solutions for low permeability sandstone reservoirs55
Rigorous modeling of frictional pressure loss in inclined annuli using artificial intelligence methods55
Preparation and properties of nano-silica hybrid hydrophobic associated polyacrylamide for polymer flooding55
Long-term effect of desorption-induced matrix shrinkage on the evolution of coal permeability during coalbed methane production55
Lithofacies identification in carbonate reservoirs by multiple kernel Fisher discriminant analysis using conventional well logs: A case study in A oilfield, Zagros Basin, Iraq55
Study on shear fracture performance of subsea test tree under emergency conditions in the deepwater oil and gas completion testing54
Determination of relative permeability curve under combined effect of polymer and surfactant54
Extraordinarily high organic matter enrichment during the late Guadalupian in northwestern Sichuan basin, China54
Seismic inverse modeling method based on generative adversarial networks54
Spatial assessment of gross vertical reservoir heterogeneity using geostatistics and GIS-based machine-learning classifiers: A case study from the Zubair Formation, Rumaila oil field, southern Iraq52
Numerical upscaling of nonlinear flow in low-permeability sandstone matrix system52
An improved empirical model for rapid and accurate production prediction of shale gas wells52
Factors controlling reservoir quality of a retreating delta-front in shallow-water lacustrine in the Songliao Basin, Northeast China51
A generalized machine learning workflow to visualize mechanical discontinuity51
Numerical simulation on oil-water-particle flows in complex fractures of fractured-vuggy carbonate reservoirs51
Invasion of CaCO3 particles and polymers into porous formations in presence of fibres51
Retraction notice to “The increased viscosity effect for fracturing fluid imbibition in shale formation” [J. Petrol. Sci. Eng. 198 (2021) 108234]50
Characteristics and formation mechanism of mesogenetic dissolution: A case study of Ordovician carbonate in the western slope of the Shulu Sag, Jizhong Depression, Bohai Bay Basin50
Plugging performance and mechanism of temperature-responsive adhesive lost circulation material50
Generative Adversarial Networks for synthetic wellbore data: Expert perception vs mathematical metrics50
Analytical model for transient pressure analysis in a horizontal well intercepting with multiple faults in karst carbonate reservoirs50
Corrigendum to “Total organic carbon (TOC) quantification using artificial neural networks: Improved prediction by leveraging XRF data” [J. Petrol. Sci. Eng. (2021) 1–15]49
A semi-analytical pressure model of horizontal well with complex networks in heterogeneous reservoirs49
Formula optimization of thermosensitive biological sol–gel carrier for EOR surfactants by rheological investigation49
Depositional and diagenetic control on conglomerate reservoirs: An example from the fourth member of shahejie formation in the Lijin Sag, Bohai Bay Basin, east China49
Editorial Board49
Elemental analysis of scale inhibitors' effect on water incompatibility in carbonate reservoirs: Modeling, bulk and core scales studies49
Physical modeling of nitrogen slug operation in Xinjiang SAGD projects - Fundamental roles of NCG in SAGD process49
Multi-physics investigation within a porous media with involving magnetic field impact on nanofluid48
Circulating preheating model of full-length horizontal wellbore in heavy oil reservoirs with multiple thermal fluid injection47
Measurement resolution of acoustic reflection imaging logging with a cylindrical phased array acoustic receiver station47
A dynamic model of two-phase flow for simulating gas kick and facilitating model-based control in drilling operations47
Development of an NMR workflow for determining nano-petrophysical properties of marine and lacustrine mudrocks47
Optimization design for turbodrill blades based on a twisting method47
Aiding (opponent) flow of hybrid copper–aluminum oxide nanofluid towards an exponentially extending (lessening) sheet with thermal radiation and heat source (sink) impact47
Effects of cleaning process using toluene and acetone on water-wet-quartz/CO2 and oil-wet-quartz/CO2 wettability46
Artificial neural network, support vector machine, decision tree, random forest, and committee machine intelligent system help to improve performance prediction of low salinity water injection in carb46
Experimental investigation of internal and external flow fields of jetting nozzles with different structures46
The effects of chemical composition of fines and nanoparticles on inhibition of formation damage caused by fines migration: Insights through a simplex-centroid mixture design of experiments45
A new transient model of multi-scale bubble migration and evolution during gas-liquid flow in pipelines45
Field performance and numerical simulation study on the toe to heel air injection (THAI) process in a heavy oil reservoir with bottom water45
Modification method of seepage parameters for rough fractures based on digital image technique44
Production versus injection induced poroelasticity in porous media incorporating fines migration44
A critical analysis of power conditions in sucker-rod pumping systems44
A closer look at SRB souring in porous media: Higher-order finite difference scheme in radial coordinate44
A semi-analytical mathematical model for the pressure transient analysis of multiple fractured horizontal well with secondary fractures44
Oil sources and accumulation processes of the Neoproterozoic Luotuoling Formation reservoirs (∼930 Ma) in North China Craton44
Joint optimization of constrained well placement and control parameters using teaching-learning based optimization and an inter-distance algorithm44
Tagging and tracking oil-gas mixtures in multiphase pipelines44
A calculation model for improving the relative borehole uncertainty based on the least square method in relief well43
Substituting petro-elastic model with a new proxy to assimilate time-lapse seismic data considering model errors43
Lattice Boltzmann study of dissolution in porous media: Comparison of VOP with VOF-curved boundary coupling43
Pore structure and fluid distribution of tight sandstone by the combined use of SEM, MICP and X-ray micro-CT43
Cement properties characterization from a section retrieved from an oil production well after 33 years of downhole exposure43
Experimental investigation of CO2 injection side effects on reservoir properties in ultra tight formations43
Pore-scale analysis of gas injection in gas-condensate reservoirs43
A systematic study of Smart Water technology in improving the reservoir recovery performance43
Friction factor estimation for turbulent flow of Herschel-Bulkley and power law fluids in pipes42
A comprehensive review of geothermal cementing from well integrity perspective42
Oil-in-water and water-in-oil emulsions formation and demulsification42
Understanding stress-sensitive behavior of pore structure in tight sandstone reservoirs under cyclic compression using mineral, morphology, and stress analyses42
Unsupervised-learning based self-organizing neural network using multi-component seismic data: Application to Xujiahe tight-sand gas reservoir in China42
Biogenically modified reservoir rock quality: A case from the lowermost member Paleocene Funing Formation, Gaoyou Depression, Subei Basin, China42
Hydrogen wettability of quartz substrates exposed to organic acids; Implications for hydrogen geo-storage in sandstone reservoirs42
Effect of solvent on the adsorption behavior of asphaltene on silica surface: A molecular dynamic simulation study42
Nanomechanical characteristics of trapped oil droplets with nanoparticles: A molecular dynamics simulation42
Three-dimensional physical simulation of water huff-n-puff in a tight oil reservoir with stimulated reservoir volume42
Geochemical characteristics and natural gas-oil-source correlation of the Shulu depression in the Jizhong Subbasin, Bohai Bay Basin, eastern China41
Conceptual evolution and practice of sand management41
Comparison of fracturing unconventional gas reservoirs using CO2 and water: An experimental study41
Sealing capacity evolution of gypsum salt caprocks under multi-cycle alternating stress during operations of underground gas storage41
Impact of nanoparticles stability on rheology, interfacial tension, and wettability in chemical enhanced oil recovery: A critical parametric review41
An efficient method for injection well location optimization using Fast Marching Method41
Editorial Board41
3D reconstruction of digital cores based on a model using generative adversarial networks and variational auto-encoders41
Iron sulphide formation and interaction with corrosion inhibitor in H2S-containing environments41
Diagenetic alterations related to sedimentary architecture of deltaic distributary channels in red beds of the Cretaceous Yaojia Formation, Songliao Basin41
Fracture cleaning: Experimental study on the unclogging process within a propped fracture under a dynamic stimulation41
A novel packer fluid for completing HP/HT oil and gas wells41
Effects of bedding direction on brine imbibition in Lower Shaximiao tight sandstone: An NMR analysis40
Pore size distributions contributed by various components in the Upper Ordovician Wufeng Shale from Southeast Chongqing, China40
Failure evaluations for packers in multistage fracturing technology with immobile strings40
Detection of two-point leakages in a pipeline based on lab investigation and numerical simulation40
Permeability in the thin section40
Influence of top water on SAGD steam chamber growth in heavy oil reservoirs: An experimental study40
Oil and gas accumulation periods and charging path of continental lake basin: A case study of the Chang 9-Chang 10 oil reservoir in the Yanchang formation in the Ordos Basin40
Efficacy of f-MWCNT-CTAB nano-complex in low-salinity seawater EOR operation40
Crustal structure and subsidence history of the Mannar basin through potential field modelling and backstripping analysis: Implications on basin evolution and hydrocarbon exploration40
Sequential production of two oil fields with an option to switch39
Construction of porous calcite structure using microbially induced calcite precipitation39
Development of an artificial neural network model for predicting the dew point pressure of retrograde gas condensate39
Experimental investigation and numerical simulation of chip formation mechanisms in cutting rock-like materials39
Experimental and numerical investigations of particle plugging in fracture-vuggy reservoir: A case study39
Minimizing calcium lactate precipitation via the addition of gluconate ions for matrix acidizing with lactic acid39
Analytical models for predicting oil recovery from immiscible CO2 injection: A literature review39
Optimization of an in-situ polymerized and crosslinked hydrogel formulation for lost circulation control39
Fast diagnosis of reservoir simulation models based on 4D seismic similarity indicators39
A novel dynamic reserve evaluation method by division between oil and water in isolated fractured-caved carbonate reservoirs39
An innovative application of deep learning in multiscale modeling of subsurface fluid flow: Reconstructing the basis functions of the mixed GMsFEM39
Pipe flow experiments of unstable oil-water dispersions with three different oil viscosities: Flow pattern, pressure drop and droplet size measurements39
Experimental research on inter-fracture asynchronous injection-production cycle for a horizontal well in a tight oil reservoir39
Machine learning assisted history matching for a deepwater lobe system39
Reduced order model and global sensitivity analysis for return permeability test38
Testing rebound hardness for estimating rock properties from core and wireline logs in mudrocks38
2-D porous flow field reveals different EOR mechanisms between the biopolymer and chemical polymer38
A qualitative study of the impact of random shale barriers on SAGD performance using data analytics and machine learning38
Experimental investigation of sudden expansion's influence on the hydrodynamic behavior of different sub-regimes of intermittent flow38
Assessing fluid flow in rough rock fractures based on machine learning and electrical circuit model38
Evaluation of tight waterflooding reservoirs with complex wettability by NMR data: A case study from Chang 6 and 8 members, Ordos Basin, NW China38
Pore-scale characterization of CO2 front progress through a porous medium using a free energy model based on Phase-Field Lattice Boltzmann Method38
Effects of hydrostatic pressure on hydraulic fracturing properties of shale using X-ray computed tomography and acoustic emission37
Geochemical characterization of the organic matter in the Devonian Pimenteiras Formation, Parnaiba Basin, Brazil – Implications for depositional environment and the potential of hydrocarbon generation37
A new dynamic capillary-number-recovery evaluation method for tight gas reservoirs37
Quantitative assessment approach to assess benefits of subsurface safety valves and tubing and packer systems in depleted reservoir and aquifer gas storage wells37
Pressure transient analysis for wells drilled into vertical beads-on-string caves in fracture-caved carbonate reservoirs: Field cases in Shunbei Oilfield37
A novel laboratory technique for open-hole gravel-pack design37
Multi-task learning for digital rock segmentation and characteristic parameters computation37
Analysis of depleted gas reservoir underground gas storage wellbore integrity change during gas injection and production processes36
Gas source in lower Permian Maokou Formation and gas accumulation in the syncline area of eastern Sichuan basin36
Study on adhesion of heavy oil/brine/substrate system under shear flow condition36
A pore-scale study of foam-microemulsion interaction during low tension gas flooding using microfluidics - Tertiary recovery36
Synergistic effects of microbial polysaccharide mixing with polymer and nonionic surfactant on rheological behavior and enhanced oil recovery36
Investigation of pipe rocking and agitator effectiveness on friction reduction during slide drilling36
Multi-parameters logging identifying method for sand body architectures of tight sandstones: A case from the Triassic Chang 9 Member, Longdong area, Ordos Basin, NW China36
A new predrilling reservoir permeability prediction model and its application36
Predicting the yield stress of oil-wax gels with long-chained n-alkanes36
Advanced monitoring and simulation for underground gas storage risk management36
Theoretical analysis of casing collapse in locally expansive mudstone36
Microscopy techniques applied to submicron characterization of oilfield produced water36
Aqueous solution of 3-pentanone for enhanced oil production from tight porous media36
Practical implementation of a method for global single-phase flow-based transmissibility upscaling using generic flow boundary conditions and its application on models with non-local heterogeneities36
Source rock with high abundance of C28 regular sterane in typical brackish-saline lacustrine sediments: Biogenic source, depositional environment and hydrocarbon generation potential in Junggar Basin,36
Application of nonionic surfactant nonylphenol to control acid stimulation in carbonate matrix35
Mineralogy and geochemistry of reservoir and non-reservoir chalk from the Norwegian continental shelf35
Reservoir rock typing and electrofacies characterization by integrating petrophysical properties and core data in the Bangestan reservoir of the Gachsaran oilfield, the Zagros basin, Iran35
Fault diagnosis method for sucker rod well with few shots based on meta-transfer learning35
A review on proppant transport modelling35
Scale, origin, and predictability of reservoir heterogeneities in shallow-marine carbonate sequences: A case from Cretaceous of Zagros, Iran35
Modeling investigation for energy storage system including mixture of paraffin and ZnO nano-powders considering porous media35
Investigation on the evaluation method and influencing factors of cross-scale mechanical properties of shale based on indentation experiment35
Multi-fracture nonuniform initiation and vertical propagation behavior in thin interbedded tight sandstone: An experimental study35
Unconventional well shut-in and reopening: Multiphase gas-oil interactions and their consequences on well performance35
Parameters govern microbial enhanced oil recovery (MEOR) performance in real-structure micromodels35
Application of iron oxide nanoparticles in oil recovery – A critical review of the properties, formulation, recent advances and prospects35
The evolution of lost circulation prevention and mitigation based on wellbore strengthening theory: A review on experimental issues35
Vertical distribution of biofilm communities along an injection wellbore in a deep petroleum reservoir35
Interfacial phenomena in petroleum reservoir conditions related to fluid-fluid interactions and rock-fluid interactions: Formulation effects and in porous medium test35
Experimental study on the wax removal physics of foam pig in crude oil pipeline pigging35
The geochemical characteristics of the Paleogene lacustrine source rock and Cenozoic oil in the eastern Huanghekou Sag, Bohai Bay Basin, China: An oil–source rock correlation34
Spearman rank correlations analysis of the elemental, mineral concentrations, and mechanical parameters of the Lower Cambrian Niutitang shale: A case study in the Fenggang block, Northeast Guizhou Pro34
Corrigendum to “The Microbial Enhanced Oil Recovery (MEOR) potential of Halanaerobiales under dynamic conditions in different porous media” [J. Petrol. Sci. Eng. 196 (2021) 107578]34
Hybrid quasi-steady thermal lattice boltzmann model for investigating the effects of thermal, surfactants and contact angle on the flow characteristics of oil in water emulsions between two parallel p34
Quantitatively study on imbibition of fracturing fluid in tight sandstone reservoir under high temperature and high pressure based on NMR technology34
Experimental evaluation of the dynamic water-blocking effect in coalbed methane reservoir34
A novel approach to estimate rock strength parameters from multistage triaxial tests (the A-HAS method)34
A proxy model to predict reservoir dynamic pressure profile of fracture network based on deep convolutional generative adversarial networks (DCGAN)34
Theoretical and experimental analysis of multiphase twin-screw pumps operating in serial arrangement34
Editorial Board34
Oil generation model of the liptinite-rich coals: Palaeogene in the Xihu Sag, East China Sea Shelf Basin34
Surrogate-assisted inversion for large-scale history matching: Comparative study between projection-based reduced-order modeling and deep neural network33
Data-driven pre-stack AVO inversion method based on fast orthogonal dictionary33
Moduli variations in two-phase fluid rocks considering squirt flow and patchy saturation33
A new correlation for accurate prediction of oil formation volume factor at the bubble point pressure using Group Method of Data Handling approach33
Automatic seismic image segmentation by introducing a novel strategy in histogram of oriented gradients33
Mechanical formation damage control in permeability Biot’s effective stress-sensitive oil reservoirs with source/sink term33
Effects of wellbore irregularity on primary cementing of horizontal wells, Part 2: Small scale effects33
Application of statistical machine learning clustering algorithms to improve EUR predictions using decline curve analysis in shale-gas reservoirs33
Pressure behavior of multi-stage fractured horizontal well in a laterally non-uniform reservoir33
Geochemical characteristics comparison of primary gas with producing gas and its significance for depleted ethane carbon isotopic values in the Southeastern gas field of the Ordos Basin, China33
Stress distribution of cased elliptical hole with high fluid pressure: Analytical expression33
The edge-guided FPN model for automatic stratigraphic correlation of well logs33
PhaseKinetics for assessing the compositional evolution of petroleum generated from the early to Late Miocene source rock, Belait Formation, Brunei-Muara district, Brunei Darussalam33
Prediction and modeling of petrophysical parameters of deep-buried, low permeability glutenite reservoirs in Yubei area, Turpan-Hami Basin, China33
Top-of-line corrosion via physics-guided machine learning: A methodology integrating field data with theoretical models32
Proppant transport in scaled experiments: Effect of drainage configuration and fracture wall roughness32
Residual oil retention and stripping mechanism of hydrophilic pore surfaces during CO2 and N2 combined gas flooding32
Modelling the impact of Alkaline-surfactant and Alkaline-surfactant-polymer flooding processes on scale precipitation and management32
Effect of high temperature and high pressure on the biodegradability and biotoxicity of typical additives in drilling fluid32
Characteristics of pore systems in the oil-bearing sandstones of the Dongying Depression, Bohai Bay Basin32
New Insight on improving foam stability and foam flooding using fly-ash in the presence of crude oil32
Effect of shale matrix heterogeneity on gas transport during production: A microscopic investigation32
In situ record of the dynamic process of wax deposition in water-in-oil emulsion: Evolution of two types of deposition structures32
0.16482090950012