Journal of Petroleum Science and Engineering

Papers
(The TQCC of Journal of Petroleum Science and Engineering is 18. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Integrated porosity methods for estimation of gas-in-place in the Muerto Formation of Northwestern Peru295
Petrophysical initialization of core-scale reactive transport simulations on Indiana limestones: Pore-scale characterization, spatial autocorrelations, and representative elementary volume analysis172
Experimental study of the influence of the content of calcite and dolomite in the rock on the efficiency of acid treatment154
Advantage of miscible fluid injection and tight oil production through a single-well alternating production-injection procedure over other single-well EOR methods154
Effect of a nanoparticle on wettability alteration and wettability retainment of carbonate reservoirs139
Navigating viscosity of GO-SiO2/HPAM composite using response surface methodology and supervised machine learning models133
CO2 and N2 adsorption/desorption effects and thermodynamic characteristics in confined coal128
A comprehensive study of the effect of Brinkman flow on the performance of hydraulically fractured wells128
Multi-fracture initiation sequence and breakdown pressure in horizontal wells during TDPF: A visualization experimental investigation based on PMMA122
Integrated optimization of fracture parameters for subdivision cutting fractured horizontal wells in shale oil reservoirs120
Screening and optimization of CO2115
Capturing dynamic behavior of propped and unpropped fractures during flowback and early-time production of shale gas wells using a novel flow-geomechanics coupled model114
Examining performance of different two-phase fluid distributions simulation methods based on digital rock technology112
An experimental and theoretical approach on real-time control and monitoring of the apparent viscosity by fuzzy-based control108
Depositional environment, seismic stratigraphy, and Sr-isotope geochronology, Bangestan reservoir, Ahwaz oilfield, SW Iran103
Geochemistry and accumulation of petroleum in deep lacustrine reservoirs: A case study of Dongying Depression, Bohai Bay Basin101
Acoustic impedance and lithology-based reservoir porosity analysis using predictive machine learning algorithms100
Interfacial tension and wettability of hybridized ZnOFe2O3/SiO2 based nanofluid under electromagnetic field inducement99
Investigation of lithological heterogeneities from velocity logs using EMD-Hölder technique combined with multifractal analysis and unsupervised statistical methods93
Evaluation method for tooth wear of roller bits based on the fractal dimension of the rock surface88
Investigating Izbash's law on characterizing nonlinear flow in self-affine fractures87
Abatement of scale precipitation in oilfields using green scale inhibitors87
Fracture growth and acoustic emission response in natural coal-rock blocks with different stress, fracturing medium and injection rates87
A novel method for trajectory recognition and working condition diagnosis of sucker rod pumping systems based on high-resolution representation learning86
3D-PMRNN: Reconstructing three-dimensional porous media from the two-dimensional image with recurrent neural network84
Investigations of CO2 storage capacity and flow behavior in shale formation84
Iterative sequential robust optimization of quantity and location of wells in field development under subsurface, operational and economic uncertainty83
Eco-friendly utilization of oilfield fracturing flow-back fluid and coal pitch for preparing slurry: Experiments and extended DLVO study81
Multiphase dolomitization and hydrothermal alteration of the Upper Cambrian-Lower Ordovician carbonates in the Gucheng uplift, Tarim Basin (NW China)79
Effects of wellbore irregularity on primary cementing of horizontal wells, Part 1: Large scale effects76
Sorptive permeability loss determined from strain-based analysis of tightly constrained experiments on shale75
Petroleum viscosity modeling using least squares and ANN methods71
The impact of surfactants and particles on the stability of emulsion in the North Coast Marine Acreage of Trinidad and Tobago70
Design and application of new impeller-type wax-proof device based on speed-increasing wax-proof mechanism68
Controls of interlayers on the development and distribution of natural fractures in lacustrine shale reservoirs: A case study of the Da'anzhai member in the Fuling area in the eastern Sichuan Basin68
Zoeppritz-equations-based amplitude variation with angle inversion for Russell fluid factor in a gas-bearing reservoir68
Incorporation of geochemical, geometrical and intermolecular interactions into modelling of scale removal in a capillary microchannel66
Evaluating the rock wettability using multi-frequency dielectric measurements: A review on the fundamental concept and experimental approach66
Effect of crude oil self-emulsification on the recovery of low permeability reservoir after well soaking65
A hybrid FAHP-MCGP approach to sustainable assessment of candidate EOR methods for a given oil reservoir65
Pore-throat structure characteristics of tight reservoirs of the Middle Permian Lucaogou formation in the Jimsar Sag, Junggar Basin, northwest China64
Experimental lab approach for water based drilling fluid using polyacrylamide friction reducers to drill extended horizontal wells64
A three-way convolutional network to compare 4D seismic data and reservoir simulation models in different domains64
Editorial Board64
Effect of hydration on Pore Structure and Physical Properties of Permian Basalt and tuff in Sichuan Basin during pressurized imbibition64
The behavior of elastic moduli with fluid content in the VTI media63
Characterizing mineralization on low carbon steel exposed to aerated and degassed synthetic hydraulic fracture fluids63
Scope of sub basalt imaging using locally generated converted waves and mixed mode depth imaging: A study on real data62
Mesh-free simulation of two-phase fluid flow in porous media based on the shock-fitting method62
Reproducing wettability in sandstone reservoir core material in laboratory core restorations62
The effect of subsurface factors on the performance of nanofluid-assisted enhanced oil recovery: Modeling and sensitivity analysis61
Reduced well path parameterization for optimization problems through machine learning61
Improved wormhole prediction model considering propagation characteristics of wormhole head in carbonate acidizing60
Evaluation of the fluids saturation in a multi-layered heterogeneous carbonate reservoir using the non-archie water saturation model60
Nondestructive investigation on hydrocarbons occluded in asphaltene matrix: The evidence from the dispersive solid-phase extraction60
Nonequilibrium override phenomenon between gases in condensate gas development59
Optimization of the vibration parameters in the vibro-seismic applications58
A novel model for oil-water two-phase relative permeability of shale formation during flowback based on fractal method57
A coupled geomechanics and reservoir simulator with a staggered grid finite difference method57
Dynamic analysis of oil-water interface, taking Shunbei oilfield as an example57
Three-dimensional seismic analysis of a polygonal fault system (PFS) in the Northern Carnarvon Basin, Australia: Implications for fluid flow migration and gas hydrate system56
Characteristics and origins of the modal pore throat structure in weakly cemented sandy conglomerate reservoirs56
The genesis of gas condensates and light oilsin the lower paleozoic of Tarim Basin, NW China: The exploration implications for ultra-deep petroleum55
River mouth jet plume related deposition in lacustrine shoal-water deltas: Implications for reservoir characterization in lacustrine basins55
Performance evaluation of analytical methods in linear flow data for hydraulically-fractured gas wells55
Acoustic stimulation of oil production by a downhole emitter based on a jet-driven Helmholtz oscillator54
Shoreline trajectory and stratal stacking patterns: Relation to sediment partitioning and types of deep-lacustrine deposits54
Axial-torsional mode correlation analysis of a drill string system with non-smooth characteristics53
Editorial Board53
Factors influencing stylolite formation in the Cambrian Longwangmiao Formation, Sichuan Basin, SW China52
Systematic approach to quality management of downhole sampling: Analysis of current trends in Russia51
Fracturing of shales with slots under uniaxial compression parallel to bedding layers51
Multigroup strategy for well control optimization51
A comparative study to accelerate field development plan optimization51
Aggressive ability improvement of self-resonating cavitating jets with double-hole nozzle51
Porosity prediction from pre-stack seismic data via committee machine with optimized parameters50
Integrated lithology identification based on images and elemental data from rocks50
Insights on the penetration and migration of chemically cross-linked systems in porous media50
Metal mesh-based special wettability materials for oil-water separation: A review of the recent development49
Experimental investigation of deterioration in mechanical properties of oil-based mud (OBM) contaminated API cement slurries & correlations for ultrasonic cement analysis49
Effect of paleoclimate and paleoenvironment on organic matter accumulation in lacustrine shale: Constraints from lithofacies and element geochemistry in the northern Qaidam Basin, NW China49
Dynamic analysis of deformation and start-up process of residual-oil droplet on wall under shear flow48
Controlling factors of fracture aperture reduction based on experimental study using proppant pack apparent Young's modulus48
Application of deep learning on well-test interpretation for identifying pressure behavior and characterizing reservoirs48
Rigorous modeling of frictional pressure loss in inclined annuli using artificial intelligence methods47
Dew point pressure of gas condensates, modeling and a comprehensive review on literature data47
Gradient descent algorithm to optimize the offshore scale squeeze treatments47
The combined effect of fluid rheology, inner pipe rotation and eccentricity on the flow of Newtonian and non-Newtonian fluid through the annuli47
Enhancing N2 an47
Investigating unary, binary and ternary interactive effects on pressure drawdown for optimal sand production prediction46
Numerical study on CO2 sequestration in low-permeability coal reservoirs to enhance CH4 recovery: Gas driving water and staged inhibition on CH4 output46
Reservoir permeability estimation from seismic amplitudes using variational mode decomposition46
A real-world impact of offset frac-hits by rate transient analysis in the Bakken and Three Forks, North Dakota, USA46
Study of mechano-chemical effects on the morphology of hydraulic fractures46
Experimental insight into the silica nanoparticle transport in dolomite rocks: Spotlight on DLVO theory and permeability impairment45
Simulation of ductile grain deformation and the porosity loss predicted model of sandstone during compaction based on grain packing texture45
Investigation on influence of temperature and pressure on fatigue damage of subsea wellhead in deepwater drilling45
A straight-line DCA for a gas reservoir45
Modelling density of pure and binary mixtures of normal alkanes: Comparison of hybrid soft computing techniques, gene expression programming, and equations of state45
Experimental evaluation of thermal maturity of crude oil samples by asphaltene fraction: Raman spectroscopy and X-ray diffraction45
Wettability effect on the invasion patterns during immiscible displacement in heterogeneous porous media under dynamic conditions: A numerical study45
Structural characteristics and storage control function of the Shun I fault zone in the Shunbei region, Tarim Basin45
Development of online separation and surfactant quantification in effluents from an enhanced oil recovery (EOR) experiment44
An experimental study on steering response of PDC drill bits44
Increasing inhibition performance of simultaneous precipitation of calcium and strontium sulfate scales using a new inhibitor — Laboratory and field application44
Experimental investigation on permeability, meso-damage and fractal characteristics of limestone caprock under THM coupling based on μCT technology44
Factors affecting gel strength design for conformance control: An integrated investigation44
Nanoemulsion: An emerging technology for oilfield applications between limitations and potentials43
Diagenetic history and reservoir evolution of tight sandstones in the second member of the Upper Triassic Xujiahe Formation, western Sichuan Basin, China43
Hydrocarbon accumulation and alteration of the Upper Carboniferous Keluke Formation in the eastern Qaidam Basin: Insights from fluid inclusion and basin modeling43
Accumulation characteristics and controlling factors of the Tugeerming gas reservoir in the eastern Kuqa Depression of the Tarim Basin, northwest China43
Mechanisms for the anisotropic enrichment of organic matter in saline lake basin: A case study of the Early Eocene Dongpu Depression, eastern China43
Hybrid modeling for submergence depth of the pumping well using stochastic configuration networks with random sampling43
Diagenesis and controlling factors of Oligocene Huagang Formation tight sandstone reservoir in the south of Xihu sag, the East China Sea Shelf Basin43
Research on casing deformation mechanism and prevention measures based on micro-seismic signal distribution43
A new method for the vibration amplitude assessment of the ESP systems considering the vibration orbit42
Simulation of flow characteristics and development of permeability model in fractured-vuggy carbonate reservoir42
Impact of capillary pressure and flowback design on the clean up and productivity of hydraulically fractured tight gas wells42
Fully implicit and fully coupled numerical scheme for discrete fracture modeling of shale gas flow in deformable rock42
A simulation study on stress-seepage characteristics of 3D rough single fracture based on fluid-structure interaction42
Adsorption behavior of welan gum on quartz sand in reservoir42
Experimental investigation into the development and evaluation of ionic liquid and its graphene oxide nanocomposite as novel pour point depressants for waxy crude oil41
Application of supercritical carbon dioxide jet: A parametric study using numerical simulation model41
A review on measurement of the dynamic effect in capillary pressure41
Investigation on the mechanism of wax deposition inhibition induced by asphaltenes and wax inhibitors41
Fault parameters assessment from the gravity data profiles applying the global particle swarm optimization41
Evaluation of circulating temperature in wellbores using drilling microchips: Modeling and case studies41
An automated data-driven pressure transient analysis of water-drive gas reservoir through the coupled machine learning and ensemble Kalman filter method41
Effect of resin as a surface active agent (natural surfactant) on the interfacial tension of high and low salinity solutions prepared by chloride-based salts41
Effect of pore space heterogeneity on the adsorption dynamics in porous media at various convection-diffusion and reaction conditions: A lattice Boltzmann study40
Experimental investigation of the flow conductivity characteristics in shale's single fracture under the PHF stimulation40
Prediction of porous media fluid flow using physics informed neural networks40
The effect of grain size, porosity and mineralogy on the compressive strength of tight sandstones: A case study from the eastern Ordos Basin, China40
Nanoparticle-stabilized CO2 foam to improve conventional CO2 EOR process and recovery at Batı Raman oil field, Turkey40
Investigation of the influence of gas fracturing on fracturing characteristics of coal mass and gas extraction efficiency based on a multi-physical field model40
Contribution of water-in-oil emulsion formation and pressure fluctuations to low salinity waterflooding of asphaltic oils: A pore-scale perspective40
Magnetohydrodynamics of immiscible Newtonian fluids in porous regions of different variable permeability functions39
Improving the pulsed neutron-gamma density method with machine learning regression algorithms39
Effect of lithological variations on the performance of artificial intelligence techniques for estimating total organic carbon through well logs39
Predicting shale mineralogical brittleness index from seismic and elastic property logs using interpretable deep learning39
Lost circulation mitigation using modified enzyme induced calcite precipitation technique39
Numerical investigation into hydraulic fracture initiation and breakdown pressures considering wellbore compliance based on the boundary element method39
Field-scale fully coupled simulation of fluid flow and geomechanics: Gas storage/recovery process in a depleted sandstone reservoir39
Quantitative experimental study on the rule of fluid flow and its influencing factors in hydraulic fractures39
An innovative method for the quantification of small amounts of crude oil in water using a multi-wavelength separation analyzer39
Association between multiphase seepage and exploitation of natural gas hydrate based on the Shenhu area of South China Sea39
A production-based model for a fractured well in unconventional reservoirs39
Modified LB model for simulation of gas flow in shale pore systems by introducing end effects and local effective mean free path38
An experimental study of the combination of smart water and silica nanoparticles to improve the recovery of asphaltenic oil from carbonate reservoirs38
Effect of water occurrence on shale seepage ability38
Experimental determination of relative permeabilities and critical gas saturations under solution-gas drive38
Field-scale simulation of gas hydrate dissociation behavior in multilayered sediments under different depressurization conditions38
Research on wellbore temperature control and heat extraction methods while drilling in high-temperature wells38
Impact of hole cleaning and drilling performance on the equivalent circulating density38
Quantifying strength and permeability of fractured rock mass using 3D bonded block numerical model38
Estimating shear wave velocity in carbonate reservoirs from petrophysical logs using intelligent algorithms38
Visual investigation of simultaneous clay swelling and migration mechanisms and formation damage consequences using micromodels38
Coal permeability prediction method based on the microscopic pore-fracture dual-porosity structure37
Experimental investigation of non-monotonic fracture conductivity evolution in energy georeservoirs37
Downhole data correction for data-driven rate of penetration prediction modeling37
A lattice Boltzmann simulation on the gas flow in fractal organic matter of shale gas reservoirs37
An effective procedure for wax formation modeling using multi-solid approach and PC-SAFT EOS for petroleum fluids with PNA characterization37
Review of foam stability in porous media: The effect of coarsening37
A fracture conductivity model for channel fracturing based on lattice-Boltzmann-method and computational-fluid-dynamics37
Shale gas production from reservoirs with hierarchical multiscale structural heterogeneities37
A novel hybrid method of lithology identification based on k-means++ algorithm and fuzzy decision tree37
Experimental study of hydraulic fracture initiation and propagation in deep shale with different injection methods37
Enhanced oil recovery by foam flooding using foam stabilized with modified Fe3O4 nanoparticles37
A coupled CFD-DEM numerical simulation of formation and evolution of sealing zones37
Facility placement layout optimization37
Application of non-parametric statistical methods to predict pumpability of geopolymers for well cementing37
A new method for characterizing dynamic reservoir quality: Implications for quality maps in reservoir simulation and rock type classification37
Application of molecular simulation in tertiary oil recovery: A systematic review36
Effects of cation salinity on the dynamic interfacial tension and viscoelasticity of a water-oil system36
Pour point depressant efficacy as a function of paraffin chain-length36
Unsaturated poroelastic responses of an inclined borehole in a porous medium saturated with two immiscible fluids incorporating the concept of the equivalent pore pressure36
Three-dimensional continuous-discrete pore-fracture mixed seepage model and hydro-mechanical coupling model to simulate hydraulic fracturing36
Chain-based machine learning for full PVT data prediction36
Chemical treatment of oilfield wastewater and the effect of temperature on treatment efficiency: A review36
Failure characteristics of rocks subjected to PDC cutter indentation36
Rheological investigation of clay-stabilized oil-in-water Pickering emulsions for potential reservoir applications36
Determining water-oil relative permeability and capillary pressure from steady-state coreflood tests35
Crude oil-water interface partitioning of polyvinylpyrrolidone-coated silica nanoparticles in low-salinity brine35
Production rate of multi-fractured wells modeled with Gaussian pressure transients35
Impact of well shut-in after hydraulic-fracture treatments on productivity and recovery of tight oil reservoirs35
Experimental study on the effect of different distributed interlayer on SAGD performance35
Data-driven technique estimates skin factor and average pressure during oil-flowing periods35
Pareto optimal directional drilling advisory for improved real-time decision making35
Effects of methane hydrates on two-phase relative permeability in sandstone: Numerical simulation of laboratory experiments35
An improved rock typing method for tight sandstone based on new rock typing indexes and the weighted fuzzy kNN algorithm34
Nature of the Lower–Middle Ordovician reservoir bitumen in the Shunnan area, Tarim Basin, northwestern China34
Three-dimensional transient flow in heterogeneous reservoirs: Integral transform solution of a generalized point-source problem34
Efficient application of stochastic Discrete Well Affinity (DiWA) proxy model with adjoint gradients for production forecast34
Three-dimensional interwell electromagnetic detection34
Influence of carbonate reservoir mineral heterogeneities on contact angle measurements34
Lithofacies identification in carbonate reservoirs by multiple kernel Fisher discriminant analysis using conventional well logs: A case study in A oilfield, Zagros Basin, Iraq34
A cluster-based approach for visualizing and categorizing the impacts of shale barrier configurations on SAGD production34
A discussion on the decoupling assumption of axial and torsional dynamics in bit-rock models34
Spontaneous imbibition characteristics of slickwater and its components in Longmaxi shale34
Selection of the particle size distribution of granular lost circulation materials for use in naturally fractured thief zones34
A comprehensive model for simulating supercritical water flow in a vertical heavy oil well with parallel double tubes33
Experimental investigation of model-based IMC control of severe slugging33
Geological structure-guided hybrid MCMC and Bayesian linearized inversion methodology33
Competition and cooperation of sulfate reducing bacteria and five other bacteria during oil production33
Effect of the depositional environment on the formation of tar-rich coal: A case study in the northeastern Ordos Basin, China33
Modified Johnson–Bossler–Naumann method to incorporate capillary pressure boundary conditions in drainage relative permeability estimation33
Noise cancellation for continuous wave mud pulse telemetry based on empirical mode decomposition and particle swarm optimization33
Mapping solid reservoir bitumen by deconvoluting formation mechanism33
Seismic reservoir characterization of potential CO2 storage reservoir sandstones in Smeaheia area, Northern North Sea33
Performance degradation and wearing of Electrical Submersible Pump (ESP) with gas-liquid-solid flow: Experiments and mechanistic modeling33
Analyzing Pressure Interference Between Horizontal Wells During Fracturing33
Buckling of a twisted rod with centralizers in a tubing33
Experimental investigation on the recovery performance and steam chamber expansion of multi-lateral well SAGD process33
XFEM-based numerical modeling of well performance considering proppant transport, embedment, crushing and rock creep in shale gas reservoirs32
Deviations from transient linear flow behavior: A systematic investigation of possible controls on abnormal reservoir signatures32
Investigation on laminar pipe flow of a non-Newtonian Carreau-Extended fluid32
Investigation on the influence of capillary number on drainage in porous media using a lattice Boltzmann method32
Experimental measurements and mechanisms of selective hindrance of oil mixtures in Niobrara shale32
A fully coupled thermo-hydro-mechanical model with ice-water phase change for liquid nitrogen injection simulation32
Investigation of the interface cracks on the cement sheath stress in shale gas wells during hydraulic fracturing32
Research on in-situ combustion oxidation model based on different diameter particle accumulation32
An integrated model for carbon geo-sequestration considering gas leakage32
Fast hierarchical inversion for borehole resistivity measurements in high-angle and horizontal wells using ADNN-AMLM32
Coarsening reduction strategies to stabilize CO2-foam formed with a zwitterionic surfactant in porous media32
Gas content evolutionin western Guizhou and differential occurrencein China of Permian shale with type III kerogen31
Application of multi-wave and multi-component seismic data in the description on shallow-buried unconsolidated sand bodies: Example of block J of the Orinoco heavy oil belt in Venezuela31
Experimental investigation on disturbance effect during coalbed methane production31
Evaluation of the applicability of in-situ combustion in a heavy oil carbonate field with high initial oil saturation31
Reservoir characterization and geological controls of the Lower Cretaceous sandstones in the northern Wuerxun Sag, Hailar Basin, China31
Petrographic features and diagenetic alteration in the shale strata of the Permian Lucaogou Formation, Jimusar sag, Junggar Basin31
Effect of dry-wet alternations on the mechanical strength of deep tight sandstone31
Development of production decline curves for non-Darcy oil flow in low-permeability reservoirs31
Lithotypes, organic matter and paleoenvironment characteristics in the Chang73 submember of the Triassic Yanchang Formation, Ordos Basin, China: Implications for organic matter accumulation and favour31
Role of viscous, diffusion and inertial mechanisms in modeling fluid flow through unconventional reservoir31
Numerical and experimental analysis of vertically ascending swirling liquid film flow31
Effect of control flow on main jet switching for single and double feedback channels fluidic oscillator31
Image processing and machine learning based cavings characterization and classification31
Searching for reservoirs with bypassed oil using well tests and mathematical modeling31
Gas holdup and flow regime in a bubble column that includes enhanced oil recovery chemicals31
Development of a water-based drilling fluid for chemical enhancement of drilling rate in a dolomite rock sample31
Effect of proppant treatment on heat extraction performance in enhanced geothermal system31
Effect of pressure fluctuation in oil-gas multiphase pump on cavitation and performance of sealing liquid film30
Alteration in micro-mechanical characteristics of wellbore cement fracture surfaces due to fluid exposure30
Study on the effect of polymer viscosity and Darcy velocity on relative permeability curves in polymer flooding30
Modeling of viscosity of unstable crude oil–water mixture by characterization of energy consumption and crude oil physical properties30
Long term assessment of the geochemical integrity of offshore wellbore cement– results from numerical modeling30
Threshold velocity of non-Newtonian fluids to initiate solids bed erosion in horizontal conduits30
Structural controls on sandstone compaction within the anticline crest and flank: An example from the Xihu Sag, East China Sea Basin30
Settling behavior of fine cuttings in fiber-containing polyanionic fluids for drilling and hole cleaning application30
Graph regression for pressure peak prediction in fracturing processes30
0.21074914932251