Physica C-Superconductivity and Its Applications

Article	Citations
Development of a 1 kW-class fully high-temperature superconducting induction/synchronous machine that enables non-superconducting operation	31
Characterization of damage in REBCO tapes for joint-less 2G-HTS magnets during mechanical slitting	28
Exploring superconducting signatures in high-pressure hydride compounds: An electronic-structure analysis	23
Electromagnetic optimization of a hybrid toroidal magnet for 10 MJ HTS SMES system	15
Effect of chemical etching of copper stabilization layer on the performance and microstructure of REBa2Cu3O7-x coated conductors	14
Vortex state in a 3D superconducting mesoscopic wedge	12
Numerical analysis of stacked HTS tapes in rotating magnetic fields using H and T-A formulations	12
The levitation force and stiffness enhancement of single domain GdBCO bulk superconductor by an axial background magnetic field	12
Deep sub-micron Josephson junctions fabricated by using maskless direct writing on 4-inch silicon wafer	11
Can dd excitations mediate pai	11
Pressure dependence of superconducting properties of layered BaNi2P2	11
Reminiscences	10
Josephson junction parameters extraction method for the RCLSJ model	10
Effect of defects on flux expulsion of pure niobium superconducting radio frequency cavities via spatial temperature gradient	9
Comparative investigation of co-winding materials for high-field iron-based superconducting metal insulation insert coils	9
Investigation of superconductivity of A15 type cubic Nb3Os material by using density functional theory	9
Insights into the polaron physics of high temperature superconductors from optical and time-domain spectroscopy	9
On creep of trapped flux near T	9
Double-pancake superconducting coil integrated with DFIG-based wind power systems under voltage-dip events: Design and performance analysis study	8
A low noise double-sided inductive method for measuring the critical current density of superconducting materials	8
Dynamic resistance loss of the high temperature superconducting coil for superconducting magnetic energy storage	8
Vortex images influenced by superconducting gap and Fermi surface	8
Design and test of a multi capacity integrated HTS thin film reconfigurable current limiter	8
Variation of the performance of YBa2<	8
Something about the Mechanism of Induction Phenomena: The forgotten work of Berta de Haas-Lorentz on diamagnetism in superconductors	8

Synthesis, Structure and Superconducting Properties of Ba1-xLax/4K3x/4(Bi0.25Pb0.75)O3- Perovskites	8
Investigation on the degradation of thermohydraulic performance of high temperature superconducting (HTS) cables used for large scale energy storage and transmission applications caused by entropy gen	8
Effect of low-temperature thermal annealing on the vortex dynamics of metastable β-Bi2Pd single crystals	7
Temperature reduction of an HTS transformer under short circuit fault by modifying the cryostat structure: Impact of Perlator and valve location	7
Enhancing electric field calculation in HTS tape simulations for currents exceeding the critical limit using full HTS tape modeling	7
Superconducting correlations in the asymmetric Hubbard model	7
Numerical simulation and design of superconducting cusp magnet for 400 mm Magnetic-field-applied Czochralski (MCZ) single crystal silicon growth	7
Copper and nickel mixed valence in oxides and chalcogenides: The key for the discovery of exotic metals	7
On the path to superconductor broadband receivers	7
Application of the pseudo-Voigt function to the analysis of single-particle tunneling spectra of	7
Corrigendum to “Thoughts about boosting superconductivity” [Physica C: Superconductivity and its Applications 632 (2025) 1354688]	7
Effect of viscous flux flow on magnetization and ac susceptibility in type-II superconductors	7
Magnetization loss of CORC cables under axial tensile loading	7
The effect of the non-uniform critical current density on the magnetoelastic behavior of bulk superconductors: Case of a long cylindrical superconductor	7
Enhanced magnetic critical current density of MgB₂ at 20 K via Co-doping with nano-aluminum and nano-carbon	7
First-principles analysis of superconducting magnesium diboride under pressure using the Cooper pair distribution function	6
An ab initio insight into the structural, physical, thermodynamic and optoelectronic properties of superconducting Heusler-like LiGa2Rh	6
Thermal analysis of the HTS transformer in the fault current condition considering the tape roughness effect	6
Effect of Rb2CO3 and Cs2CO3 on MgB2 in polycrystalline bulk samples	6
Emergent Bose liquid: A generic quantum state of matter alternative to Fermi liquid	6
Investigation of the effect of conformal pinning array on critical current density in infinitely long superconductors	6
Energy and exergy analysis of the cryogenic system for HTS magnets based on an open-cycle G-M/J-T cryocooler	6
Design of superconducting magnets for high energy beam transport lines for proton cancer therapy	6
Mass creation in superconductors by Physics-cells quantum gravity	6
Editorial Board	6
First-principles study on the electronic structure and optical properties of orthorhombic CaTiO3 under different pressures	6
Spin-triplet f-wave pairing via cyclic exchange in the anisotropic triangular Hubbard model: A route to unconventional superconductivity	6
Further analysis of flux trapping experiments on hydrides under high pressure	6
A design study on MVAr class superconductor synchronous condenser with no-insulation HTS field coil	6
Editorial Board	5
Spin resonances in heavy-fermion superconductors	5
Foreword for the special issue of Physica C “Quantum matter” dedicated to Jan Zaanen	5
On the ac magnetic susceptibility of a room temperature superconductor: anatomy of a probable scientific fraud	5
Observation of multiple fractional quanta in a superconducting bilayer disk with a pinhole	5
Editorial Board	5
Bending characteristics of multi-layer spiral HTS cable with large tape gap	5
Periodic-threshold amalgamated quasi-one-junction SQUID comparator	5
Effects of asymmetric geometry and surface defects on vortical configurations in mesoscopic superconducting loops	5
Editorial Board	5
Design and fabrication of a heat switch for a SQUID-based superconducting gravimeter	5
Electromagnetic design of MRI superconducting magnet based on novel hybrid optimization methods	5
Optimization of the Halbach permanent magnet guideway in HTS maglev based on sensitivity analysis	5
Modeling and analysis of torque characteristics for an axial HTS magnetic coupler	5
The Copper Mountain Report	5
The local rupture of the superconductivity and the curvature of the mesoscopic sample	5
Design and analysis of cold mass support system for superconducting magnets without transport protection	5
Weakly coupled type-II superconductivity in LaCoSi2	5
Negative resistance and heat dissipation in superconducting wires in an ac magnetic field	5
Design and investigation of losses of a low-current HTS AC cable for a promising cryogenic generation system	5
Physical properties of BaRu2X2 (X = P, As) superconducting compound sunder pressure effects: Ab initio study	5

Modeling of induced currents in a type-II superconducting cylinder of finite length in a transverse magnetic field	5
Two-band superconductivity in Pt-intercalated ZrTe2, a Dirac semimetal	4
Superconducting properties and pinning mechanism of filamentary (Sm,Gd,Dy)–Ba–Cu–O doped with Co	4
Bending characteristics of a round strand made by stacked HTS tapes	4
Numerical simulation of damage and critical current degradation behaviors of RRP and PIT Nb3Sn wires under transverse pressure	4
Damping evaluation of HTS magnetic levitation system	4
Superconductivity and strongly correlated materials in Bariloche	4
Tilted solenoids magnet using superconducting stacked tapes	4
Identification of the nature and mechanism of the zinc doping effect on the normal-state properties of the YBa2Cu3Oy system by a quantitative analysis of the thermopower and Nernst coefficient	4
Influence of pre-overpressure heat treatment on micro-structure and related properties of Bi-2212 round wire	4
Numerical approach to calculating binding requirements in high-field STM superconducting magnets	4
Nanoscale phase separation in cuprate superconductors	4
Current limiting characteristics of a resistance-inductance type superconducting fault current limiter	4
Transverse resistance variations in helically wound 2G ReBCO high-temperature superconducting tape with core under transverse cycling and bending loads	4
Effect of doping on spin density wave & superconductivity in electron-doped iron Pnictide superconductors	4
Preparation of high-quality factor dielectric resonators for low-noise YBa<	4
On fractal thermodynamics of the superconducting transition and the roles of specific heat, entropy and critical magnetic field in disordered superconductors	4
Aslamazov Larkin conductivity in layered Dirac/Weyl semimetals	4
Test of a curved Discrete Cosine-Theta superconducting magnet for Ion-therapy	4
Experimental study on fatigue properties of REBCO copper bonding joints under cyclic tensile loading at 77 K	4
Copper electroplating technique for development of HTS current leads bottom joints using MgB2 wires	4
Dynamic response of high-temperature superconducting magnetic levitation under real seismic wave excitation	4
The fabrication of graphene supported Ni nanoparticles and its doping influence on the microstructure and superconductivity of MgB2	4
Optimizing trapped field in superconductors with perforations	4
Superconductivity in cuprates with planar oxygen vacancies and apical oxygen vacancies	4
Omnidirectional High Reflectors Using Silica/Superconductor Fibonacci Photonic Crystal for Optical Communication Applications	4
Comparative study on the impact of different E-J relations on the performance of resistive superconducting fault current limiters under high and low impedance faults in cryo-electric aircraft	4
High-temperature superconductivity and strange metallicity: Simple observations with (possibly) profound implications	3
Utility applications and experience with resilient electric grid systems utilizing high temperature superconductor wires in Chicago	3
Universality and crossovers for quantum-criticality in 2d metals	3
Belief in thermodynamics has provoked false thermodynamics of superconductors	3
A Pt-Ti thin-film heating method for de-fluxing SFQ circuits in superconducting computers	3
Editorial Board	3
Research on the HTS joint for 10kA-level CORC cable with forced-flow cooling	3
Enhanced cuprate superconductivity from elongated to compressed coordination	3
Zero energy bound states on nano atomic line defect in iron-based high temperature superconductors	3
Numerical study on effective thermal conductivity of the compacted superconducting magnet	3
Effect of charging sequence of background coil and insert coil on screening current in high-field non-insulated hybrid superconducting magnets	3
Study on preparation of Nb3Sn films by bronze route	3
Effects of extrinsic parameters on superconducting nanowire single-photon detector output – A study towards developing read-out circuit	3
Manufacture process and cabling optimization of Bi2212 CICC	3
Towards in silico mining for superconductors – Cutting the Gordian knot	3
Editorial Board	3
The influence of Sm2	3
Preparation of double-layer REBa2Cu3O7− tapes for enhancing engineering current density by Ag-diffusion bonding	3
Motion characteristics of a self-driven HTS bulk maglev under the composite magnetic field	3
Spin fluctuations in conventional superconductors and anomalous isotope effect in PdH and PdD	3
Experimental study of thermal stability of HTS cable under DC overcurrent	3
Pressure dependence of the superconducting properties of the rare-earth-based Heusler compounds ReRh2Sn (Re=Sc, Y and Lu)	3
Fabrication of high-critical current density Nb/Al-AlN/Nb junctions with an AlN barrier deposited by DC magnetron reactive sputtering	3
Timing verification of rapid single flux quantum logic cell	3
Material aspects of oxygen isotope effect studies in high-temperature superconductors	3
Quantum fisher information reveals UV-IR mixing in the strange metal	3
Effect of laser energy density on microstructure and critical current of YGBCO and HGBCO films fabricated by PLD	3
Photo response of Co-doped BaFe2As2 meander micron line	3
Analysis and redesign of the thermal shield for the 40-T hybrid magnet at the CHMFL	3
Planckian bounds from local uncertainty relations	3
Effect of winding pitches on dynamic resistance of CICC made from CORCs	3
Effect of insulating dense pinning centers on pinning potential and transport critical current density of YBCO superconductors	3
Editorial Board	3
Possible Raman signature of broken symmetry states near the quantum critical point in P doped BaFe3
Experimental research on the influence of HTS tape width and former type on the transverse compression performance of CORC cables	3
Electron–phonon coupling in Mott insulators	3
Proximity effect and quasi-particle-lifetime effect in ferromagnet/f-wave superconductor junctions	3
In-field electro-magnetic-force characteristics of high-temperature superconducting films containing cracks	3
AC loss analysis on an HTS field winding of the generator with formulation	3
Structural design and analysis of 7 T active-shield animal MRI magnet system	2
Magnetothermal modeling of multilayer HTS tapes for quality control at room temperature	2
Numerical modelling and analysis of current induced stresses in REBCO coil stacks	2
Editorial Board	2
The strange metal state of the high-Tc cuprates	2
Growth of YBa2Cu3O7-δ superconducting films under different atmospheres by pulsed laser deposition	2
Superconducting critical temperature and isotope effect in the presence of electron-phonon,electron-paramagnon and electron-electron interactions in rhodium	2
Preparation of La1.89Ce0.11CuO4 superconducting film by sol-gel method	2
Guided vortex motion in dilute strong pinning environment: Models and experiment	2
Editorial Board	2
Electromagnetic design and performance analysis of a 20 MW-class high temperature superconducting induction/synchronous motor for electric aircraft applications using a self-assembling design method	2
Analysis on thermal stability of Rutherford cable fabricated by quasi-isotropic strands	2
Critical temperatures and critical currents of wide and narrow quasi-one-dimensional superconducting aluminum structures in zero magnetic field	2
Effect of temperature and spinning speed on texture in spin-coated Sm2Zr2O7 buffer layer on Ni-5 at.%W RABiTS for coated conductors	2

Editorial Board	2
Rapid vortex flux motion in GdBa2Cu3O7−d nanobridges	2
Comparative analysis on twisting characteristics of HTS quasi-isotropic strand and stacked-tape strand	2
Bridge in micron-sized Bi2Sr2
An effective SMES system control for enhancing the reliability of hybrid power generation systems	2
Mixed pairing states of honeycomb model	2
Study on enhancing the interaction capacity between permanent magnets and a superconductor coil	2
Corrigendum to “The foot, the fan, and the cuprate phase diagram: Fermi-volume-changing quantum phase transitions” [Physica C (205) 633, 1354707 (2025)]	2
The influence of the additional coil and ferromagnetic rings on high-temperature superconducting engine magnets	2
Design and implementation of dummy fill for chemical-mechanical polishing in superconducting single flux quantum circuit fabrication process	2
Modeling of levitation force by using Jc distribution approaches for bulk MgB2 fabricated with different methods	2
s±	2
Size effect of randomly distributed pinning centers on magnetic vortices motion in type-Ⅱ superconductor	2
Simulation of the superconducting magnet for a silicon single crystal growth	2
Influence of the position of the Josephson junction in the base Nb layer on modulation characteristics of the Josephson current	2
Predicting the superconducting transition temperature and relative resistance ratio in YBa2	2
Minimal surfaces & the intermediate state of type-I superconductors	2
HTS–SLIM design based on Bayesian multi–level, multi–objective optimization and Gaussian process models	2
Temperature-dependent properties of basic elements of all-NbN RSFQ circuits	2
Effect of mesoscopic defect on vortex dynamics of prestrained type-II superconducting film	2
Corrigendum to ‘Superconductivity in YIn3 under positive pressure’ Physica C: Superconductivity and its Applications 564, 15 September 2019, 6-10	2
Editorial Board	2
Influence of growth parameters on the superconducting transition temperature in granular aluminum films	2
Origin of the reentrant tetragonal phase in hole-doped Fe-pnictide superconductors: Role of intersite Coulomb interaction	2
Crack problem in a functionally graded superconductor cylinder under pulsed field magnetization	2
Jahn-Teller Polarons in metal oxides and their signature in local lattice distortions	2
Calculation and understanding of the nitrogen doping process in niobium for superconducting radio frequency accelerator	2
Superconducting properties and vortex pinning in intermetallic BaBi3 single crystals: A magnetization study	2
The variation of pinning efficiency in YBCO films containing columnar defects	2
Modeling of HTS high-current stacked conductors with defective tapes in different locations	2
Weakly coupled Type-II superconductivity in a breathing Kagome metal ZrRe2	2
Design and test of a compact twisted stacked YBCO cable for fusion application	2
Influence of ReBCO tape winding mode on the magnetization loss of CORC cable under the shielding current effect	2
Design and analysis of a novel high TC-superconducting coupling for high torque transmission and speed regulation: A Comparative study with slotted eddy current coupling	2
A planar mounted SQUID full-tensor module for magnetoenterogram denoising detection	2
Editorial Board	2
Research on the current compensation mechanism of FJTL in ERSFQ	2
Superconducting DC busbar with low resistive joints for all-electric aircraft propulsion system	2
Investigation of the effect of non-uniform stress distribution on the transient electromagnetic behavior of a no-insulation REBCO racetrack coil	2
Motion and thermal stability for high-temperature superconducting maglev vehicle under extreme crosswind conditions	2
Effect of unconventional current-phase relation of Josephson junction on escape rate in ac SQUID	2
Conceptual design of hybrid IBS-REBCO magnet and a study on joint technology for high-field application	2
Unusual electronic structure in underdoped cuprate superconductors	2
Vortex arrangement in an ultrathin superconducting bilayer disc	2
Influences of oxygen partial pressure on the phase composition of the (Bi, Pb)-2212 precursor powder	2
Structural Analysis of 2G HTS Tapes under Different Loading Conditions for HTS Power Cable using Finite Element Modeling	2
Drastic enhancement of magnetic critical current density in Zn doped Bi-2212	2
The foot, the fan, and the cuprate phase diagram: Fermi-volume-changing quantum phase transitions	2
Design and test of a canted-cosine-theta superconducting quadrupole magnet for CiADS project	2
Effect of ferromagnetic particles on the elastic and magnetostriction parameters of bulk superconductors	2
Thoughts on the influence of Alex Mueller on high magnetic field technology	2
Design, construction, and performance of the new 148 mm Bore, 25 T magnet test platform for HTS cables at the CHMFL	2
Effects of twisting pitch on critical current of HTS tapes in Quasi-isotropic strand	2
The compound Ca2	2
Calculation of AC loss using 2D homogenization method for HTS synchronous condenser rotor and validation	2
Electro-thermal dynamics in superconducting generators: An In-Depth investigation of AC losses and cooling techniques for a 10 MW rotor coil system	2
In-gap states of vortices at the surface of a topological insulator	1
Critical current properties of an ex-situ MgB2/TiB	1
Magnetic flux trapping in porous high-T superconductors	1
Analyzing and modeling of an ultra-compact superconducting resonator for kinetic inductance detectors applications	1
Superconducting single crystals show about 50% increase of the superconducting critical temperature after Ar Ion implantation	1
Disordered MgB2 superconductor critical temperature modeling throu	1
Electron–phonon driven unconventional superconductivity: The role of small Fermi energies and of nonadiabatic processes	1
Preparation of a/c-oriented YBa2Cu3O7− homogeneous superconducting junctions via pulsed laser deposition	1
Shot noise in topological insulator-based ferromagnet/p-wave superconductor junctions	1
Similarity of magnetization and magnetic flux jumps evolution with the magnetic field direction relative to the plane of the superconducting niobium plate	1
Chemical potential influence on the condensation energy from a Boson–Fermion model of superconductivity	1
Can linear transformations bend a straight line? Comment on “Author Correction: Magnetic field screening in hydrogen-rich high-temperature superconductors”	1
Gradient magnetic field measurement using first-order gradiometers equipped with 50 mm diameter pickup coils made out of a 2G high-Tc superconducting tape	1
Effect of sintering time on the characteristics of YBCO coated-conductor joints using nano-silver paste	1
Spectral domain modeling of superconducting slotline in the presence an oblique applied static magnetic field	1
Development and performance evaluation of a conduction-cooled warm bore HTS steering magnet	1
Editorial Board	1
Effect of metallic particle addition to the filling powders on the superconducting properties of ex situ processed MgB2 tapes using milled powders	1
Superconductivity in In-doped AgPbBiTe3 compounds synthesized by high-pressure synthesis	1
Electron, phonon, and superconducting properties of Mg2CuH6 under pressure	1
Numerical evaluation of the impact of introducing heterogeneous structures into the REBCO layer on fracture behavior under tensile strain	1
Feasibility study on quench detection methods of Raman and Rayleigh scattering techniques in optical fiber encapsulated HTS coils	1
Vortex transport entropy in cuprate superconductors and Boltzmann constant	1
Quench stability simulation of the CFETR CSMC at 47 kA	1
Oxygen isotope effect on the superfluid density within the d-wave a	1
Interfacial superconductivity in Cu/Cu2O and its effect on shielding ambient electric fields	1
Vibration suppression of high-temperature superconducting maglev system via semi-active suspension system	1
Development and experiment of superconducting Eddy current braking prototype device	1
MOCVD deposited double-sided CeO2 buffer layer for YBCO superconducting film grow on R-plane Al2O3 substrate	1
A profound legacy – K. Alex Müeller	1
Describing heat dissipation in the resistive state of three-dimensional superconductors	1
Flux creep regimes and vortex phase diagram in β-FeSe single crystals	1
Normal state Landau–Fermi liquidness of pure and doped Sr	1
Thermodynamic properties in the extended BCS-Bose crossover theory	1
Electromagnetic and thermal analysis of a high-speed superconducting AC homopolar motor	1
Record-high critical current density in (Ba,Na)Fe2As2 round wire suitable for high-field applications	1
Effects of Rashba and Dresselhaus spin-orbit couplings on the critical temperature and paramagnetic limiting field of superconductors with broken inversion symmetry	1
Holographic Schwinger–Keldysh effective field theories including a non-hydrodynamic mode	1
Does the Meissner effect violate the second law of thermodynamics?	1