Materials Science and Engineering B-Advanced Functional Solid-State Ma

Papers
(The median citation count of Materials Science and Engineering B-Advanced Functional Solid-State Ma is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
High-entropy (YxEr1-x)2(Ti0.2Zr0.2Hf0.2Ge0.2Sn0.2)2O7 oxide: A promising thermal barrier coating material with potential fluorescent Nondestructive Function186
Green synthesis of Co-Zn-Ni trimetallic oxide nanoparticles using Cicer Arietinum leaf extract and their antibiofilm activity: Experimental and computational study117
Correlating nanoscale 3D topographical complexity with optoelectrical performance in CNT/Ag/AZO hybrid transparent conductors115
Thermal synthesis of Ga2O3/SnO2 core–shell nanowires and their structural characterization111
Structural, microstructural and electrical characterization of Sr1-xCeO3: xNa+ (0 ≤ x ≤ 0.08): Investigating dielectric relaxation and NSPT charge transport mechanism111
Eutectic microstructure and its effect on electrical and magnetic properties of V-Ti-Si alloy superconductors111
Digital and analog resistive switching in Lu-doped piezoelectric B105
Functionalization of glass fiber woven fabrics by indium tin oxide (ITO) coatings for electromagnetic wave absorption88
Fractal-property correlation of carbon nano-tubes in 3D truss-like network under stress/strain85
Ni Nanoparticle-Ti3C2Tx/PI composites with multiple wave absorption mechanisms85
Alumina tunnel contact based lateral spin-Field effect transistor80
Enhanced spin current by anti-reflective magnetic tunnel junctions79
Dynamic analysis of single–layered graphene sheet subjected to a moving nanoparticle: A molecular dynamics study79
Structural, Optical, Electrical and Magnetic properties of 100Mev Ni7+ irradiated Mn doped ZnO thin films77
Fabrication and evaluation of 3D bio-scaffold wound dressings for monitoring of chronic pH wounds using fuzzy logic analysis77
Sonochemical synthesis and characterization of Ho2Sn2O7/Er2Sn2O7 nanocomposites and their application as photocatalyst for degradation of water-soluble organic pollutants under UV light75
Versatility of a 2D carbon allotrope with tetrarings in oxygen activation reactions73
Conductive filament nanostructures and their magnetization reversal in NiO resistive switching memory cells73
Enhanced performance of GO and RGO/Y2SiO5: Sm3+ nanocomposites for supercapacitors and biosensors72
Influence of sodium and calcium contaminant in the growth of carbon nanotube on rayon-based carbon fibers70
Effect of beryllium on the stabilization of Mg-3Ca alloy foams70
Phase-change-driven tuning of linear and nonlinear optical properties of Te/As2Se3 bilayer thin films for optoelectronic applications65
Stability and physical properties of net-Y-Si from first-principles calculation65
Extraction of Ag3Sn nanowires bundle and its electrochemical characteristics64
Preparation of B-doped LATP solid electrolyte with enhanced ionic conductivity via Spark Plasma sintering62
Graphene quantum dots-polyfluorene hybrid nanobiosensor for mitomycin C-DNA interaction sensing61
Influence of deposition temperature and fluorine doping on CdS properties: Exploring applications in CdTe solar cells60
Design of a novel ZnBi2O4 /Bi2O3 type-II photo-catalyst via short term hydrothermal for enhanced degradation of organic pollutants60
Effect of calcination temperature on structural, antibacterial, radiation shielding and magnetic properties of cubic spinel cobalt nanoferrite60
Evaluating the effect of flow configuration on the performance and thermal stress of solid oxide electrolysis cell60
Open-circuit voltage (V ) enhancement through integration of MoS2 layer at the interface between Mo and Sb2S359
A study on the electrical and dielectric traits of ternary NiCuZn-spinel ferrites co-substituted with Ga3+-Gd3+ ions57
Effects of TiO2 layer and post-heat treatment on the crack-free and improved electric properties of sol-gel derived PZT-based films for MEMS applications56
Explanation of polyimide as a green electrode material for Mg-, Na- and Li-ion batteries: DFT and AIMD approach55
Enhancing the supercapacitor performance by manufacturing hybrid electrode based on foam-like graphene oxide / zinc oxide nanoparticles54
Mn dopant-enabled BiFeO3 with enhanced magnetic and photoelectric properties54
The SCAPS-1D simulation of non-toxic KGeCl3 perovskite from DFT derived properties53
Influence of cobalt doping on the structural and third order nonlinear optical properties of MgO nanostructures53
Comprehensive characterization and unprecedented photocatalytic efficacy of TiO2-CuO-La2O3 and TiO2-CuO-Bi2O3 nanocomposites: A novel approach to environmental remediation53
Evidence of a stable tetragonal (P4bm) phase in rhombohedral (R3c) complex perovskite (Na53
Optical, electronic, morphological, and structural properties of Zn1−xCuxSe thin films deposited by electrodeposition: a combined DFT calculation and experimental study52
Influence of substrate temperature on the structural, optical properties, and I-V characteristics of n-AgInSe2/p-Si heterojunctions52
Promoted visible-light driven photoreduction of mercuric ions over hydrothermally synthesized platinum oxide-supported zinc tungstate hierarchical nanospheres52
Corrigendum to “Transverse vibration analysis of double-walled carbon nanotubes in an elastic medium under temperature gradients and electrical fields based on nonlocal Reddy beam theory” [Mater. Sci.52
Dielectric modulation based investigation of heterojunction dual gate vertical TFET for bio-molecule detection51
Microscopic modeling of polarization dynamics in leaky dielectrics: Insights into ferroelectric-like behavior50
Electrochemical performance of K+ -intercalated MnO2 nano-cauliflowers and their Na-ion-based pseudocapacitors50
Interfacial modification strategy using hydroxyethyl cellulose for enhancing the performance of CsPbBr3 perovskite solar cells49
Influence of Co and Ni concentration on the structural, UV transparency and electrical behavior of ZnO nanorod49
Studying structural, molecular, morphological and electrical properties of Co0.2 Zn0.8 Fe2O4 doped with Cadmium49
3D-printed electrodes and electrochemical cell for sulfamethoxazole quantification48
Influence of Mn-doping on the structure, high-temperature dielectric, and conductive properties of NaNbO3 ceramics48
Sustainable synthesis of multifaceted copper oxide nanoparticles from Euphorbia tirucalli: Unveiling antimicrobial and catalytic potential48
Metal-organic framework-derived FeNi@NC catalyst for highly efficient hydrogen generation via ammonia decomposition47
Robust one-pot solvothermal incorporation of InVO4 with polymeric-C3N4 nanosheets with improved charge carrier separation and transfer: A highly efficient and stable photocatalyst for solar fuel (H2) 47
Preparation of H2TiO3@GO for rapid adsorption of Li+ and its adsorption behaviour47
Structural and thermionic emission investigations of perovskite BaHfO3 based low work function emitters47
Rapid synthesis of Dy3+-doped BaY₂O₄ nanophosphors: Dual-functional material for white light emission and photocatalytic dye degradation47
In-situ preparation of FeCo-Layered double hydroxides modified anion exchange resin D201 for As(V) effective removal from aqueous solutions46
Biogenic carbon matrix with dual-mode adsorption capability: synthesis, characterization and mechanistic insights45
Crystal engineering and humidity response of metal halide perovskite [Ph3MeP]2CuBr4 single crystals: A combined experimental and theoretical approach45
Exciton-plasmon coupled piezo-photocatalysis in Au/BiFeO3 composites for multi-pollutant degradation45
Thermal performance of iron oxide and copper (Fe3O4, Cu) in hybrid nanofluid flow of Casson material with Hall current via complex wavy channel45
Unique magnetic graphene oxide with enhanced carboxylate functional groups for uranium separation by solid phase extraction44
First-principles study on the electronic structure, magnetic and optical properties of strain regulated (V, Cr) co-doped SnSe244
Physical properties of different polymorphs of sulfur doped ZnO studied in the framework of first-principles approaches43
First principle study of multilayered graphene/MoS2 heterostructures for photodetectors43
Microstructure, AC conductivity and complex modulus analysis of Ca-ZnO nanoparticles for potential optoelectronic applications42
Unveiling the promising physical properties of Ca3BiX3 (X = F, Cl, Br, and I) compounds: A comprehensive study on their suitability for high-performance optoelectronics42
Synchronizing charge-carrier capacity and interfacial morphology of green rGO modified ZnO and TiO2 heterojunctions and study of their photocatalytic behaviour towards UV and visible light active drug42
Effective NH3 gas sensing at low ppm by ZnO films through improved charge carrier and adsorption: Single and dual doping with Al and Cu- a comparative study41
Effect of two-step annealing on the structural uniformity and magnetic properties of Fe73.5Cu1Nb3Si13.5B9 alloy magnetic cores.41
Development of highly thermal-stable blue emitting Y4Al2O9:Bi3+ phosphors for w-LEDs, fingerprint and data security applications41
Facile synthesis of Bi2WO6-NiO nanocomposite for supercapacitor application40
Comparative thickness dependent structural, dielectric and ferroelectric property study of PLD deposited ZrO2 thin films40
Effect of electrolyte composition and deposition voltage on the deposition rate of copper microcolumns jet electrodeposition40
The synergistic effect of Ce dopant/Cotton bio-template on the performance of the SnO2 gas sensor for the detection of Ethanol40
Fe3O4/FePc@carbon nanofibers based on joule-heating in situ growth strategy for electromagnetic wave absorption40
Advanced cathode catalysts with well-defined active sites toward CO2 reduction/evolution reactions of Li-CO2 battery40
Enhancement of piezoelectric responses of electrospun PVDF nanofibers through mechanical stretching and annealing process39
Osteogenic commitment of strontium nanoparticles doped mesoporous bioactive glass-ceramics39
Structural, optical, and magnetic properties of submicron hematite (α-Fe2O3) particles synthesized from industrial steel waste39
Highly stable electrodeposited 2D Mn0.2Co0.8 LDH nanoplatelets based symmetric supercapacitor electrode39
Studies of temperature-dependent Raman spectra of thin PtSe2 layers on Al2O3 substrate39
Protein-exfoliation mediated molybdenum disulfide incorporated with silver nanoparticles for photocatalytic degradation of Rhodamine B38
Improved resistive switching characteristics of Au/TiO2/Au memristors on PDMS substrates with pyramid arrays38
Unveiling the potential of spray-coated Cs3Bi2I9 based perovskite solar cells: Numerical insights and experimental realization38
Experimental and modeling analysis of photocarrier dynamics in CZTSSe using temperature-dependent photoluminescence38
One-second regeneration of superhydrophilicity and antifog performance of laser induced tungsten based micro-nano structure by flame treatment38
Zinc oxyhydroxide–chili pepper nanobiohybrids: Synthesis, characterization and evaluation of their potential use as a pesticide on Puto barberi38
Dual mode non-contact optical thermometry and temperature-dependent Judd-Ofelt analysis of Eu3+ doped LiCa2Mg2V3O12 phosphors38
NdBaCo1.8Nb0.1Y0.1O5+δ as an efficient and durable air electrode for protonic ceramic electrolysis cells37
Carbon dot engineered zinc oxide-hydroxyapatite nanocomposite doped with holmium as prospective nanoprobe for bimodal luminescent and T2-magnetic resonance imaging37
Effect of molar concentration and drying methodologies on monodispersed silica sol for synthesis of silica aerogels with temperature-resistant characteristics37
Enhancement of mechanical and ferromagnetic properties of Cd0.4Mn0.6XO nanocomposites (X=ZnO, SnO, CuO, Al2O3, Fe2O3, CoO, NiO)37
Exploring the impact of CeO2 precursors on the intrinsic ROS generating ability and antibacterial potential37
Theoretical screening of rare earth and transition metals for tuning surface electron emission of ZrB237
Doping and intercalation synergy in BCN@CMC hybrids: Tailored band structure and stable ECG & EEG signal transduction37
TiS2 nanosheets exfoliated by liquid phase ultrasound as cathode materials for magnesium ion batteries37
Triple synergy: Fabrication of novel Cl, C binary-doped g-C3N4 porous wrinkled nanosheets for promoted visible-light-instigated photocatalytic H2 production37
Study of efficient sustainable phosphor in glass (P – i – G) material for white LED applications fabricated by tape casting and screen-printing techniques37
Editorial Board36
Thermodynamic, dielectric, and electro-optical properties of an anti ferroelectric liquid crystalline material36
Electrically conductive zeolite/carbon nanotubes honeycomb monoliths for enhanced electric swing adsorption36
An investigation into the structure, microhardness, intermolecular interactions, electrical and optical properties in lead-free (CH3CH2CH2NH3)2[BiCl5] single crystals for optoelectronic applications36
Editorial Board36
Development of undoped or doped zinc and zirconium based metal oxides for voltammetric sensing of DNA36
High temperature synthesis and material properties of boron-enriched balk pyrolytic carbon36
Investigation of thermal parameters in numerical modeling of the laser powder bed fusion process for maraging 300 steel36
Important comments on the paper “Development of a novel triple perovskite barium bismuth molybdate material for thermistor-based applications” by D. Panda et al.36
Stable metal-organic framework (MOF) integrated BCZT for improved photo-electrochemical water splitting36
A non-enzymatic electrochemical sensor based on zinc oxide/reduced graphene oxide (ZnO/rGO) nanocomposite for effective detection of urea35
New explanation on formation mechanism of anodic TiO2 nanotubes35
Impact of terbium (Tb) on ferromagnetism and thermoelectric behaviour of spinels MgTb2(S/Se)4 for spintronic35
Sol-Gel mediated synthesis of Sb5+-doped nickel cobaltite (NiCo2O4) spinel structures: unveiling the role of Sb5+ in enhancing the specific capacitance of NiCo2O435
Effect of anionic bromine doping on the structural, optical and electrical properties of spray-pyrolyzed SnO2 thin films35
Green synthesized Se@ZnO nanocomposites using Ficus religiosa extract for enhanced photocatalytic degradation of fast green dye and biological applications35
Gold nanoparticles in microelectronics advancements and biomedical applications35
Synthesis of Zn2+:LaMnO3 perovskites nanoparticles by facile co-precipitation approach: Physicochemical characteristics and supercapacitor application34
Synthesis and characterization of Al-doped ZnO and Al/F co-doped ZnO thin films prepared by atomic layer deposition34
Improved thermal conductivity of Ga2O3 thin films grown on polished polycrystalline diamond by thermal annealing34
Investigation of structural, electronic, optical, mechanical, and solar cell performance of inorganic novel Ca3AsI3 compound through DFT and SCAPS-1D34
Composite with natural ingredients and layered double hydroxide nanoparticles as antioxidant and sunscreen powder material34
Scalable binder-free one pot hydrothermal synthesis of 2D flower-like Bi2WO6 nanoparticles for high performance supercapacitor application34
Cu2AgS1-xSex and Cu2ZnSn(S1-xSex)4 (x = 0.0 to 1.0 and Ag = 0.05) strong light absorbers fabrication and characterization for optoelectronic devices: A numerical analysis of the solar cell performance33
Modulation of optoelectronic properties in Cl and Br doped GUASnI33
Highly selective and sensitive humidity sensor using reduced graphene oxide based iron oxide nanocomposites33
An innovative biodevice towards monitoring of miR-153 using specific DNA immobilized on the surface of poly(chitosan) decorated AgNPrs/GQDs-CysA conductive nano-ink: Early-stage diagnosis of Parkinson33
Facile construction of Z-scheme g-C3N4/BiVO4 heterojunctions for boosting visible-light photocatalytic activity33
Enhanced visible-light-driven photocatalysis and accelerated charge transfer in PoPD/NiFe2O4/AgI ternary composite33
Magneto-electric effect in Y1-xRxFeO3 (R = Sm and Er) ceramics33
Synthesis, coating, and application of a novel cadmium-free red perovskite quantum dot for micro LED technology33
Ultra-small gold particles via Citrus × sinensis: Theoretical and experimental SERS study33
Supercapacitor electrode with constructive formation of manganese cobalt phosphate structures33
Effect of growth temperature and Sb over in flux ratio on the Bi content and the surface morphology of InSbBi grown by molecular beam epitaxy32
Electrochemical behavior of Sn-doped Li1.2V3O8 cathode materials for Lithium-ion batteries32
Fabrication of Mn and Gd decorated CrFe2O4 photo-catalyst with enhanced light capturing property for mineralization of rhodamine-B and benzimidizole pollutants32
Semiconducting nature, magnetic critical exponent, and magnetocaloric effect study near room temperature on Fe Mn Al alloy32
Mechanism insights into the enhanced photocatatlytic peroxydisulfate activation by Fe3O4/BiOI heterojunction32
The monomers and polymers of azomethine-based thiocarbohydrazones: Fluorescent activities, fluorescence quantum yields of polymers in water and DMF solutions32
Editorial Board32
High performance ZnO nanorod arrays/carbon dots mixed dimensional composite photodetector32
Engineered metamorphosis: Neodymium-driven phase transformation in zirconia nanoarchitectures for next-generation radiation shields32
Disposable luminescent kit based on dithizone-functionalized waste blue-phosphor as field-deployable sensor for environment monitoring32
Editorial Board32
Interface-engineered N, S-doped carbon dots embedded cerium metal-organic framework nanohybrid as a multifunctional electrode for the detection of mercury in environmental and biological matrices32
Study of magnetic, elastic and Ka-band absorption properties of Zn1−xCoxFe2O4 (0.00 ≤ x ≤ 1.00) spinel ferrites31
Corrigendum to “Multiphase Ce-doped manganese oxide system synthesized by solution combustion method with better antibacterial effects after reheating” [Mater. Sci. Eng.: B 295 (2023) 116559]31
First-principles calculations to investigate structural, electronic, thermoelectric, and optical properties of heavy thallium perovskite TlPbX3 (X = Cl, Br, I)31
Non-perturbative method for spin-Hamiltonian parameters and its applications to Co 31
Quartz crystal microbalance modified with rhodamine-polyacrylonitrile nanofibers for acetone vapor sensing31
Efficient CO2 monitoring of cabin air in airplanes utilizing α-MnO2-TiO2 hetero-nanocomposite sensor31
Corrigendum to “Characterization of strain rate sensitivity of 7075 aluminum alloy at different solution temperatures by novel kinetic models” [Mater. Sci. Eng. B 282 (2022) 115751]31
Retraction notice to “Fabrication of Nd2S3 based rGO nanohybrid via hydrothermal route and evaluation of capacitive features toward supercapacitor application” [Mater. Sci. Eng. B 301 (2024) 117207]31
Giant strain and excellent anti-fatigue properties of La3+ doped (Na0.84K0.16)0.5Bi0.5Ti0.985Ta0.015O3 lead-free ceramics31
Effective visible-light-driven oxidative desulfurization of thiophene over Li2MnO3-doped Bi2MoO6 heterojunction photocatalyst31
Bandgap engineering and tuning of electronic and optical properties of 3D Cu3Se2 by Zn doping and dimension reduction: Density-functional quantum computations for optoelectronic and photovoltaic appli31
Preparation and electrochemical performance of nano-SnO2/carboxyl-functionalized graphene composite via chemical domain confinement31
Corrigendum to “Achieving a high positive temperature coefficient effect at low temperature through combining spherical HDPE/SBR with MCMB” [Mater. Sci. Eng. B 288 (2023) 116177]31
Solution processed low operating voltage SnO2 thin film transistor by using Li2SnO3/TiO2 stacked gate dielectric31
A novel high-entropy oxide Sr0.7Ba0.3(Nb0.2Hf0.2Ta0.2Zr0.2Ti0.2)2O6-δ: Achieving ultralow thermal conductivity through highly disordered B-site cations31
Third order nonlinear optical properties and electrochemical performance of La2CoMnO6 double perovskite31
Tailoring the structural, dielectric and energy storage properties of (Na0.4K0.1Bi0.5)TiO3 piezoceramics via Bi(Mg0.5Zr0.5)O3 substitution31
Reforming of graphite oxide from agro-waste by incorporating nanosilica for the remediation of nitrate and phosphate anions from wastewater30
High-performance cold-source field-effect transistors based on Cd3C2/ boron phosphide heterojunction30
Layered iron metal mesoporous carbon regulated by NaCl as tri-functional electrocatalyst toward ORR, OER and HER30
Optical properties of Ag2S quantum dots30
Efficient photocatalytic degradation of Zn and Gd-doped BiOBr 3D microspheres using reactive dyes under visible light30
Pressure effect on the physical properties of 413-type MAX phase compound Nb4AlC3: Insights from DFT simulation30
Ellipsometric study of the porous silicon: The impact of decoration and oxidation on porosity depth profiling30
Electronic, thermoelectric and electrical transport properties of single layer γ-graphyne30
Preparation of graphite/silicon carbide based on SLS/LSI and study of properties30
Enhanced superparamagnetism and polarizability via reverse annealing in Mg-doped Co-ferrite: structural, morphological, and optical investigations for biomedical applications29
Oxygen vacancy-rich Z-scheme g-C3N4/BiOBr heterojunction with enhanced visible-light photocatalytic activity for pollutants degradation29
Tunable structural and optoelectronic properties of twisted 1L-MS2 (M = W; Mo)29
Efficient photocatalytic degradation of crystal violet dye using time-dependent ZnO nano spindle29
Silver vanadate-coupled zinc oxide nanocrystals: Solution-based synthesis and sustainable photoreduction of nitrobenzene to aniline under visible light29
Cellulose nanocrystal blended with carbon nanotube as flexible supercapacitor and diclofenac sodium sensor29
Structural, mechanical and electrochemical properties of spark plasma sintered Ti-30Ta alloys29
Sensitivity enhancement using triple metal gate work function engineering of junctionless cylindrical gate all around SiNW MOSFET based biosensor for neutral biomolecule species detection for upcoming29
Review on functional electrospun nanofibers: Theory, application and fabrication29
Development of GO-decorated CuO and CuO/La2O3 from Garcinia mangostana for supercapacitor application29
Designing the (1-x) Bi4Ti3O12 − x BiFeO3 Di-Phasic composites to Explore the dielectric and multiferroic properties for the RAM-Based storage devices29
Preparation of a hierarchical 3D structure composed of Co-doped SnO2 nanosheets with excellent gas sensitivity to acetic acid28
Revealing the relaxation kinetics of curcumin based dye-sensitized solar cell28
Oxygen vacancy-regulated MXene-supported PdSn bimetallic catalyst for efficient methanol oxidation reaction28
Experimental and computational investigation on Polyaniline/Zno nanocomposite for dye adsorption28
Two-layer hybrid sol-gel system's thermal parameters investigated with the optical nondestructive photoacoustic method in the frequency domain28
In-situ growth mechanism and structural evolution of silicon quantum dots embedded in Si-rich silicon carbide matrix prepared by RF-PECVD28
Facile binder free synthesis of NiO–Cr₂O₃ composite coatings for high performance symmetric supercapacitor28
Preparation of AgBiS2 powder and its photocatalytic performance28
Cost-effective bimetallic MOF electrocatalyst with dual-linker strategy for enhanced oxygen and hydrogen evolution reactions28
Validation of ZnTe as back surface field layer for CdTe solar cells: A combined experimental and theoretical study28
Room-temperature aging and low-temperature experiments of ferromagnetic Sb/Sb2O3 composite nanoparticles28
Contribution of (Bi0.45Y0.05)Na0.5ZrO3 to induced multiphase coexistence and enhanced piezoelectric properties of K0.5Na0.5NbO3 lead-free ceramics28
ZnMn2O4 hierarchical hollow Self-Assembly microspheres Bearing enhanced photocatalytic activity under visible light27
Electrical and structural investigation of Pt/n-type GaN Schottky contacts: The possible origin of inhomogeneous barrier27
High-thermal-stability PA6T separators via non-solvent induced phase separation for high-performance supercapacitors27
Features of photocatalysts Bi2WO6, Bi2MoO6, CsNi0.25W1.75O6 and CsMn0.25W1.75O6 in polymerization process27
Enhanced lithium storage of LiTi(HPO3)2 anode probed by in-situ X-ray diffraction and ex-situ X-ray photoelectron spectroscopy27
Effects of polyethylene glycol on structural and magnetic properties of SrFe12O19 nanoparticles prepared by sol-gel auto-combustion method27
Auto-combustion synthesis and characterization of La2CrMnO6/g-C3N4 nanocomposites in the presence trimesic acid as organic fuel with enhanced photocatalytic activity towards removal of toxic contamina27
Comment on the paper titled “Study of mechanical, optoelectronic, and thermoelectric aspects of lithium-based double perovskites Li2AgSbX6 (X = Cl, Br, I) for energy harvesting applications” [Mater. S27
Exploring the thermoelectric performance of NiFeMnAl and ZnFeVAl as novel quaternary Heusler compounds27
Bacteria immobilized onto carbon nanofiber as a composite for effective removal of arsenic from wastewater27
Three-dimensional zinc oxide decorated with cadmium sulfide nanoparticles heterogenous nanoarchitectures with expedited charge separation toward efficient photocatalytic degradation of organic polluta27
Stretchable, self-healing, transparent macromolecular elastomeric gel and PAM/carrageenan hydrogel for self-powered touch sensors27
Photoemission properties of triple-layer GaInAsSb heterojunction nanopillar array for infrared photocathode27
Synthesis and characterization of Ag-doped CdS quantum dots for enhanced photovoltaic performance of quantum dot sensitized solar cells27
The effect of temperature on the contact angle of a water drop on graphene and graphene synthesized on copper27
AuNP modified hetero-nanocomposite based chemicapacitive sensor for detection of ascorbic acid26
R3c to P1 phase transition in Nd3+/Gd3+ co-doped BiFeO3 nanoparticles: Enhanced magnetic and photocatalytic properties26
Novel zinc oxide sensor with oxygen vacancies (VO) and interstitial zinc (VZni) self-compensating effect for high aniline response26
Effects of potassium dichromate on the structural, linear/nonlinear optical properties of the fabricated PVA/PVP polymeric blends: For optoelectronics26
Influence of the reactive gas mixture on the superconducting properties of nitrogen-doped aluminum thin films26
Microstructure analysis, optical properties and efficacy for antibiotic degradation of Cu/W doped and Cu-W co-doped NiO nanocrystals26
Microwave processed metal nanoparticles/MoO3-PVA photoactive nano-composites for energy applications26
Enhanced UV protection and photocatalytic activity in Samarium and Europium co-doped TiO2 thin films: A durable solution for protective coatings26
Optimal design and characterization of activated carbon-modified micron zero-valent iron for Sb(III) removal from aqueous solution26
Dual-function Co₃O₄/MoS₂/MWCNTs are used in glucose sensors and high performance supercapacitors26
Sustainable preparation of Ag-ZnO nanocomposites using Persea americana peel extract for superior antibacterial, antioxidant, and photocatalytic efficacy26
Design and photocatalytic performance of BaFe12O19 nanoplatelets for RR195 dye26
Tin-doped titanium dioxide film-enhanced electrocatalytic hydrogen evolution26
Rationalizing Fe-Modified TiO2 through doping, composite formation, and single-phase structuring for enhanced photocatalysis via inter- and intra-charge transfers26
Hydrogel-integrated functionalized carbon nanotube electrode for electrochemical glucose sensing26
Variation in gold monolayer properties on interaction with DNA/RNA nucleobases useful for DNA sensing26
One-Pot synthesis of CuO-Cu2O nanoscrubbers for high-performance pseudo-supercapacitors applications26
Polyethyleneimine modified nanofibrillated cellulose aerogels loaded with steel slag for enhanced Cr(VI) removal under visible light: Performance and mechanism25
Magnetically separable rGO based ternary composite for enhanced photocatalytic activity25
Vibrational and impedance analysis of the β-stannic acid doped by sulfuric acid25
Exploring the photoelectrochemical properties of SrxZn1-xO nanomaterials and versatile applications to photocatalytic degradation of E133 food coloring and fingerprint detection25
Recent progress of flexible 2D film in thermoelectric application25
Figure of merit for evaluating the thin-film encapsulation's performance via mechanical, barrier and optical properties25
The size-shape dependent Debye temperature, melting entropy and melting enthalpy theoretical models for metallic nanomaterial25
Structure control and growth mechanism of beaded SiC nanowires with microwave absorption properties25
Nickel-Cobalt oxides coated on polypyrrole nanotubes as bifunctional electrode catalyst for enhancing the performance of the microbial fuel cells25
Emergence of anomalous Hall effect in a semiconducting van der Waals heterostructure with a strong altermagnetic feature25
Multiferroic properties of 0.7BiFeO3 - (0.3-х)BaTiO3 - хPbTiO3 solid solutions25
Harnessing the multifunctional properties of ZnO nanoparticles for High-Performance optical and Paper-printed colorimetric detection of silver ions25
Quantum transport in a multi-path graphene Aharonov–Bohm interferometer25
Magnetic TiO2-nZVI nanofibers: A highly efficient platform for electrochemical dopamine detection25
Anisotropic elastic, opto-electronic and photocatalytic properties of BaTi2O5: First-principles calculations25
Enhancing perovskite solar cells with nanostructured TiO2/BaTiO3 electron transport bilayers: Materials design and performance25
The regulation of multidimensional structures of BiOCl and its photocatalytic mechanisms25
Polyaniline assembly ultra-thin graphene hybrid nanocomposites synthesis for current research trends of promising applications in emerging fields25
Acceleration of the chemical delamination of Ti3AlC2 crystals in the presence of chloroauric acid with the formation of 2D MXenes25
Microwave sintering of CaMnO3 thermoelectric perovskites synthesized by modified Pechini method25
MgO nanofiller reinforced biodegradable, flexible, tunable energy gap HPMC polymer composites for eco-friendly electronic applications24
Investigating the multifaceted properties: Magneto-electronic, mechanical, thermophysical, optical and thermoelectric properties of Scandium based full Heusler alloys for spintronic and optoelectronic24
Numerical design and optimization of Sb2S3/SnS2 heterojunction solar cells: Performance analysis and insights24
0.22573399543762