Journal of Alloys and Compounds

Article	Citations
Upper critical field and peak effect in (Li0.8Fe0.2)OHFeSe single crystal	282
Magnetic regulation in the off-stoichiometric L10-MnGa thin film by Fe doping	251
Magnetic phase diagram of helimagnetic Ba(Fe1−Sc )12O19 (0 ≤ x ≤ 0.2) hexagonal ferrite	213
Influence of Zn2+ and Sb5+ co-substitution for Sn4+ on crystal structure and electrical conductivity of SnP2O7 electrolyte	212
Preparation of SiO @TiO2@N-doped carbon composite using chitin as carbon precursor for high-performance lithium storage	207
Comments on the paper “Fabrication and physical characteristics of K/W double doped BiFeO3 complex electro-ceramic; (Bi1/2K1/2)(Fe1/2W1/2)O3”	207
Editorial Board	202
The electrochemical characterization and kinetic investigation of sub-micron Bi2Fe4O9 as possible anode of advanced lithium-ion batteries	199
Positive stretching dependence of resonance frequency in CoFeB films modulated by lateral growth pre-strain	198
The effect of sodium formate mediated double regulation in TiO2 photocatalytic reduction of cadmium	178
Development and precise determination of high reproducibility Ga-In eutectic temperature fixed point	175
Crystallization kinetics and microstructural analysis of lanthanum-modified zinc alloys	173
Temperature-induced phase transition of PNZST ceramics near the morphotropic phase boundary for thermal-electrical energy conversion	172
Effects of solid isolation medium on the microstructure and magnetic properties of one-step sintered L10-FePtCu nanoparticles	167
Corrigendum to “A novel direct Z-scheme heterojunction BiFeO3/ZnFe2O4 photocatalyst for enhanced photocatalyst degradation activity under visible light irradiation” [J. Alloys Compd. 912 (2022) 165185	166
WITHDRAWN: Novel design of Sn4P3@NxC electrodes and their electrochemical properties	166
Improved luminescence and afterglow emission from Mn2+/Si4+ co-doped AlN by combustion synthesis method	164
Corrigendum to: “In situ absorption synchrotron measurements, predictive modeling, microstructural analysis, and scanning probe measurements of laser melted Ti-6Al-4V single tracks for additive manufa	163
Superdispersed NiCo2S4 nanoparticles anchored on reduced graphene oxide for efficient hydrogen evolution reaction in acidic and alkaline media	162
Dipole–Quadrupole interactions between Sm3+ ions in KY3F10 nanocrystals	160
Effects of hydrogen pretreatment on the nitridation, microstructure, and magnetic properties of Sm2Fe17N3	157
Research on biaxial tensile deformation behavior of CP-Ti by experiments and crystal plasticity simulations	155
Converse magnetoelectric effect in three-layered composites based on amorphous ferromagnetic Fe0.45Co0.45Zr0.1 alloy and relaxor (1 - x)PbMg1/3Nb2/3O3 - xPbZr0.53Ti0.47O3 ceramics	154
Role of boron addition in tuning microstructure and mechanical properties of AlNbTiZr based multiprincipal element alloy	138
Unveiling the supercapacitive potential of MWCNT/Zn0.76Co0.24S/Co4S3 microcauliflowers as an advanced electrode material for sustainable energy storage applications	136

Photo-dielectric response enhancement and switching behavior of (1-x)(K0.5Na0.5)NbO3-xCa(Ni0.5Nb0.5)O3-δ ceramics by semiconduction method	136
Construction of h-BN/Cu2O/FeCoNi nanocomposite in double-layer configuration unveiling superior optical, x-band absorption and mechanical performance	133
Microstructure evolution and accelerated magnetocaloric phase formation of LaFe13.1Co0.7Si1.4 alloy by forging deformation at room temperature	131
Layered quaternary chalcogenides KMgCuSe2 and KMgCuTe2 with paramagnetic semiconducting behavior	131
Optimizing microstructure and mechanical properties of bimodal-structured magnesium matrix composites by regulating the remelting time of powder thixoforming	130
Tailoring degradation of MgZn alloy films with bioinert amorphous carbon	130
Flower-like SnO2 nanorod aggregates modified with Co3O4 nanoparticles grown on reduced graphene oxide(rGO) sheets for xylene sensing	129
Improvement in microstructure uniformity and mechanical properties of surface modified graphene reinforced Ni-based composites by laser deposition	129
Ivermectin detection using Ag@ B, S co-doped reduced graphene oxide nanohybrid	128
Achieving high heat-resistant property in dilute Mg-0.2Ce wrought alloy by retarding recrystallization process	120
Microstructure inducement of different tensile fracture mechanisms at 800 ℃ of directional solidified Ti-45Al-5Nb alloys produced by electromagnetic confinement	118
Influence of oxidant and sample state on oxides distribution of Ag-4.93Sn-3.56In alloy powders	116
High non-linear electrical properties of Li3xCo7–4xSb2+xO12 a new ceramic varistor	115
High-resolution topochemical analysis and thermochemical simulations of oxides and nitrides at grain boundaries and within the grains of a low alloy Mn-Cr hot-rolled steel sheet	113
Au tailored on g-C3N4/TiO2 heterostructure for enhanced photocatalytic performance	113
Improved Co-substituted zinc vanadate ceramics based on LTCC for enhanced polarization converters	112
Improved threshold switching characteristics of vanadium oxide/oxynitride-based multilayer selector in a cross-point array	111
Enhanced thermoelectric performance of n-type Bi2Te2.7Se0.3 by pyrite CoSe2 addition	111
Unexpected atmosphere effect on the iron oxide growth by the Laser Floating Zone method	111
Structural transformation and transport behavior of mixed valence compound Sn3O4 under high pressure	109
Neo-heterojunction based on the kesterite copper chalcogenide semiconductor with magnetic iron-cation partial-substitution: In-situ room-temperature pulsed laser deposition and optoelectronic properti	109
A new D-A-D type benzodithiazole-based hole transport material for Sn-Pb perovskite solar cells with high efficiency and stability	108
Control of structural and magnetic transition in GeNCr3 by doping manganese ions	108
Conducting surface layers formed by hydrogenation of O-implanted β-Ga2O3	107
Cooperative non-covalent interactions-directed the supramolecular self-assembly and its derivative for bifunctional water electrocatalysis	105
Microstructure and corrosion resistance of ultrahigh pressure Mg-8Li based alloys	104
On the nature of the magnetostructural phase transition in Ce(Fe1-Si )2	104
The effects of tensile stress on the microstructure evolution and elemental interdiffusion behavior of (Ni,Pt)Al coating and nickel-based superalloy at 1100 ℃ for 200 h	102
The spin reorientation and improvement of magnetocaloric effect in HoCr1-Ga O3 (0 ≤ x ≤ 0.5)	102
Crystal structure of the τ11 Al4Fe1.7Si phase from neutron diffraction and ab initio calculations	102
Synthesis of sub-micron LiNi0.5Mn1.5O4 with uniform size distribution by oleylamine-assisted solid-state method	101
Experimental investigation and thermodynamic calculation of the Co-Al-Mo ternary system	100
Novel synthesis of porous Si-TiO2 composite as a high-capacity anode material for Li secondary batteries	99
Synergistically enhanced photothermal catalytic CO2 reduction by spatially separated oxygen and sulphur dual vacancy regulated redox half-reactions	98
Polymerizable precursor method vs solid state reaction for the synthesis of Ni3(PO4)2 yellow hue pigment with advanced characteristics	98
Preparation, microstructure, and thermophysical properties of Cr3+-modified cordierite high emissivity ceramic for metal thermal protection	98
Correlation of crystal orientation, crystal morphology and mechanical properties of directionally solidified Mg-xGd alloys	97
Effect of metallic contacts diffusion on Au/GaAs and Au/GaN/GaAs SBDs electrical quality during their fabrication process	97
The effect of strain rate on deformation-induced α′ phase transformation and mechanical properties of a metastable β-type Ti–30Zr–5Mo alloy	95
Nature of polaronic hopping conduction mechanism in polycrystalline and nanocrystalline Gd0.5Sr0.5MnO3 compounds	95
Optimized crystallization and defect passivation with Yttrium (III) doped MAPbBr3 film for highly efficient and stable hole-transport-layer-free carbon-based perovskite solar cells	94
Improved piezo-photocatalysis performance of Ba1-Sr TiO3 nano-podwers via synergistically optimizing phase ratio, defects and polarization	94
Multifunctional graphene oxide implanted polyurethane ionomer gel electrolyte for quantum dots sensitized solar cell	94
Eutectoid-structured WC/W2C supported WS2/WO3 as a highly efficient hydrogen evolution electrocatalyst	93
Ammonia controlled synthesis of NiO nanosheet arrays for high-performance electrochromic-supercapacitors	93
Polarity-dependent fatigue behavior of domain switching kinetics in textured ferroelectric Al0.72Sc0.28N thin films	93
A novel SnS2 nanomaterial based on nitrogen-doped cubic-like carbon skeleton with excellent lithium storage	93
Novel design of Sn4P3@NxC electrodes and their electrochemical properties	92
Phthalimide additive-promoted ambient fabrication of inorganic CsPbI2Br perovskite for highly efficient and stable solar cells	92
Field-induced tricritical phenomenon of the van der Waals magnetic material CrVI6	92

Growth, structural effects, and non-linear and spectroscopic properties of nanocomposites based on α-NiSO4·6H2O single crystals with TiO2 nanoparticles or sols	91
Novel preparation of MOF derived Co(OH)2/ZnFe2O4 magnetic micro-nanoreactor with boost peroxymonosulfate activation for enhanced antibiotic contaminant oxidation	91
Designing dual-functional mesoporous g-C3N4 nanosheets doped with KPF6 for H2O2 production and antibiotic degradation	90
Synergistic regulation of sulfur-group elements doping and strain on the thermoelectric performance of innovative material Er2Te3	90
X-ray peak broadening analysis of Bougainvillea glabra assisted ultrasonic exfoliation of h-BN sheets	90
Room-temperature self-calibrating sensor based on CsPbBr3/SnO2 for detecting low-concentration sulfur dioxide	90
Microwave-assisted preparation of PtCu/C nanoalloys and their catalytic properties for oxygen reduction reaction	89
Oxygen concentration – A governing parameter for microstructural tailoring of duplex AlCrSiON coatings for superior mechanical, tribological, and anti-corrosion performance	89
High optical contrast and radiant heat blocking properties of hierarchically structured electrodes for electrochromic windows	88
Understanding of the enhanced coercivity and energy product in Sm(CobalFe0.27Cu0.05Zr0.02)z permanent magnets with lower z value	88
Enhanced thermoelectric properties for p-type BiSbTe by incorporating multiferroic BiFeO3 nanoparticles	88
Study on a new high-entropy alloy Nd20Pr20La20Fe20Co10Al10 with hard magnetic properties	87
Composition design of corrosion resistant Fe40Mn40Co10Cr10 HEA by “dissolution-diffusion-deposition” model	87
Interaction of metallic magnesium with ammonia: Mechanochemical synthesis of Mg(NH2)2 for hydrogen storage	87
Synthesis and mechanical behavior of in-situ porous Ti particle reinforced Mg-Cu-Gd-Ag bulk metallic glass matrix composite	87
Oxidation protection of TNM alloys with Al-rich γ-TiAl-based coatings	87
The tunable double-layer self-supporting Sb-Ni(OH)2 catalyst for boosting electrocatalytic water splitting	86
Hierarchical Sb2S3@m-Ti3C2Tx composite anode with enhanced Na-ion storage properties	86
Peritectic solidification mechanism of substantially undercooled liquid Fe-Y-B ternary alloys	86
Facile strategy of using conductive additive supported NaMnPO4 nanoparticles for delivering high performance Na-ion supercapacitors	86
Structure analysis and luminescence properties of red-emitting iodide scintillators with potassium-hexachloroplatinate(IV) type structure	85
Chemically lithiated layered VOPO4 by a microwave-assisted hydrothermal method and its electrochemical properties in rechargeable Li-ion batteries and supercapacitor applications	84
Hexagonal bi-pyramid α-Fe2O3 microcrystals: Unusual formation, characterization and application for gas sensing	84
Preparation and characterization of calcium phosphate containing coating on plasma electrolytic oxidized magnesium and its corrosion behavior in simulated body fluids	84
Reinforcing effect and toughening mechanism of gradient nanostructured Ti during tensile deformation	83
Co9S8@In2S3 hetero-nanostructures as highly sensitive and selective triethylamine sensor	83
Preparation of heterogeneous nanolaminated graphene nanosheet/Al–Cu–Mg composites by powder assembly & alloying	83
Hollow Bi4Ti3O12/TiO2 nanocakes for photocatalytic hydrogen generation	83
Effects of A/B ratio on the dielectric properties and AC conductivity behaviors of La-doped SrTiO3 with colossal permittivity	83
Large-scale preparation of cobalt niobate/reduced graphene oxide composite materials for high-performance lithium-ion battery anodes	82
β-Sialon:Eu2+ phosphor-in-glass: An efficient and potential green color conversion material for laser lighting systems	82
Sulfur-doped hollow carbon spheres as high-performance anode materials for potassium-ion batteries	82
Precipitation behavior and properties change of Cu-3Ti-0.5Mg-0.5Sn alloy during two-stage cold rolling and aging treatment	82
Directed regulation of charge transport pathways in fabricating Co9S8/Cd8.05Zn1.95S10/Pt heterojunction for high-efficiency photocatalytic water splitting	82
Water-mediated synthesis of cost-effective Fe3+ substituted LaCl3-based halide solid-state electrolyte	82
Formic acid gas sensor based on coreless optical fiber coated by molybdenum disulfide nanosheet	81
Linear and nonlinear optical properties of trigonal borate crystals K7MIn2−xYbx(B5O10)3 (M = Ca, Sr, Ba; x = 0…2) with isolated B5O10 units	81
Vertically aligned nickel-iron-phosphide nanosheets on three-dimensional porous nickel foam for overall water splitting	81
Formation and influence of graphene in Inconel 625 prepared by selective laser melting	80
Li10Sn0.95P2S11.9−xOx: A new sulfide solid electrolyte for all-solid-state batteries	80
Construction of a visible-light-driven p-BNMF/TiO2 composite photocatalyst for effective ofloxacin contaminant removal	80
Deep reconstruction of highly disordered iron/nickel nitrate hydroxide nanoplates for high-performance oxygen evolution reaction in alkaline media	80
Electrochemical characteristics of Sr-deficient SrTi0.3Fe0.7O3−δ oxygen electrodes for solid oxide electrolyzers	80
Simultaneously improving strength and corrosion resistance of CoCrNi-based multi-principal element alloys via alloying with Mo content	79
Selective laser melting of biomedical Ti15Mo alloy: A proper combination of strength and ductility under the effects of multiple mechanisms	79
Rate theory coupling multi-phase-field simulation for neutron irradiation nanophase and vacancy evolution	79
Nickel-cobalt bimetallic sulfide nanowire arrays anchored on carbon cloth as high-efficiency and flexible electromagnetic wave absorber	78
Selective growth of ZnO micro- and nano-structures on fs-laser processed metallic Zn substrates for large area applications	78
Pressure-tunable superconductivity on cage-like compound Y5Rh6Sn18	78
Cooperativity in Fe2N5P dual-atomic site: Designing dual atom catalysts for water-splitting reactions	78
Deciphering the piezoelectric and conductive mechanisms of Nb-doped Bi3Ti1.5W0.5O9 high-temperature piezoelectric ceramics	78
A2Cd(PO3)4 (A = K, Rb, Cs): Series of cadmium polyphosphates with infinite 1[(PO3)4]ꝏ chains and deep ultraviolet transparency windows	78
CO2 reduction by borohydride over modified biochar-loaded nickel-copper alloy at ambient temperature and atmospheric pressure	77
Study on the effect of ultrasonic rolling on the microstructure and fatigue properties of A03600 aluminum alloy	77
Multi-objective design of Ni-B-Al master alloy by adaptive machine learning-driven aluminothermic reduction experiment	77
Effect of glucose addition on the morphology and activity of ZnO supported on mesoporous zeolite SBA-15 for the removal of hydrogen sulfide	77
Sodium lanthanum boro-tellurite glasses with Sm3+ ion doping and gold nanoparticle embedding: A new glass matrix for solid state lighting devices	77
Experimental study on deformation mechanism around indentation of GH4169 alloy	77
Fabrication of g-C3N4 wrapped CAU-17 for efficient photocatalytic H2O2 production	77
Synergistic role of nickel-chromium heterogeneous selenides in the efficient stabilisation of the oxygen evolution reaction	77
WC/Mo2C heterojunctions modified with Ru embedded on carbon matrix for efficient hydrogen evolution in water electrolysis	76
Trinity system: Leaf-like PVDF/Al@CNTs composites with superhydrophobic, safety, and high energy-releasing performance	76
In-situ self-assembly nano-fibrous perovskite cathode excluding Sr and Co with superior performance for intermediate-temperature solid oxide fuel cells	76
Electrochemical performance of Li1-xNaxNi0.8Al0.2O2 as symmetrical electrode for low temperature ceramic fuel cells	76
Research of different mechanisms in the weak/strong acoustic active zones on microstructure evolution and mechanical property of Ti48Al2Cr2Nb2.5C composites	76
Effect of seed orientations on the crystallization characteristics and the magnetic levitation properties of single domain YBCO bulk superconductors	75
Possible half-metallicity and suppressed double-exchange interaction in spinel Mn2.4Ni0.6O4: A Ni-substitution effect	75
Two-in-one additive engineering strategy induced high-quality CsPbBr3 film in printable mesoscopic perovskite solar cells	75
Microstructural characterisation and compound formation in rapidly solidified SiGe alloy	75
Microfluidic-enabled control of ethanol oxidation catalyst synthesis by separating heterogeneous nucleation and growth processes	75
Insight into the failure and healing of oxide scales during cyclic oxidation of powder metallurgy superalloy with various Nb content	75
Defect enriched N, S-codoped carbon sheets as an efficient electrocatalyst to oxygen reduction reaction	75
Tuning of magnetic and dielectric properties of Gallium doped hematite(α-GaxFe(2−x)O3) nanospheres	74
The role of unsaturated coordinated sites of electrocatalysts in electrochemical energy conversion:A review	74
On the nature of photosensitivity gain in Ga2O3 Schottky diode detectors: Effects of hole trapping by deep acceptors	74
Exploring the imprint effect of oxygen-deficient PbTiO3 thin films on energy storage characteristics of ferroelectric capacitors	74
Achieving high sheet resistance and near-zero temperature coefficient of resistance in NiCr film resistors by Al interlayers	74
Eco-friendly lead-free metal halide perovskites: Progress and prospects in multifunctional applications	74
Electron transport engineering with different types of titanium dioxide nanostructures in perovskite solar cells	74
Effect of hot isostatic pressing on the microstructure and mechanical properties of selective laser melting FeCrAl ODS alloys	74

Tunable dielectric properties of Y³ ⁺, Ni²⁺, and Y³ ⁺-Ni²⁺ substituted magnetite nanorods for multifunctional applications in sensing, energy harvesting, and environmental remediation	74
Low elastic modulus and superb antibacterial performance in copper-bearing refractory high-entropy alloys	74
Construction of SnO2 nanoparticles modified Bi/MoO3 nanosheets heterojunctions for fast response and highly selective ethanol sensing performance	73
Pt nanoparticles decorated 3D printed hierarchical porous titanium alloy scaffolds for hydrogen evolution reactions at amper-level current densities	73
Thermoelectric properties and effective medium theory analysis on the (GeTe)1-x(InTe)x composites	73
N-doped Ru/Mo2C-based electrocatalyst for outstanding and durable hydrogen evolution reaction with universal pH	73
Micromechanical simulations and experimental characteristics of randomly distributed carbon nanotubes reinforced Mg matrix composites	73
In-situ high-temperature scanning electron microscopy study of phase transformation and variant selection phenomena in TC21 titanium alloy	73
Contrasting magnetic properties of polymorphic TbPt3	73
Tantalum's role in the microstructure and its influence on corrosive behavior in Co-Cr-Ta alloy	73
Preparation and water vapor corrosion behavior of AlN polytype bonded SiC bricks	73
Thermodynamics study for Y2O3-Al2O3-SiO2 system: Emphasis on the equilibrium phase relationship at 1400℃ and 1600℃	73
Effect of SiC particles on the microstructures and mechanical properties of Mg–9Al–1Zn based composites	73
Enhancement of critical current density and flux pinning force of MgB2 by Bi2212 addition	73
Microstructure, corrosion resistance, and antibacterial property of HVAF-sprayed Cu55Ti25Zr15Ni5 coating	73
Bright blue-emitting CsPbBr3 nanoplates for white light emitting	73
Machine learning combined with feature engineering to search for BaTiO3 based ceramics with large piezoelectric constant	72
3D-architectured spherical Ce2Mo5O16 by a time-dependent hydrothermal process and their energy storage application	72
Zinc glycolate Zn(OCH2CH2O): Synthesis and structure, spectral and optical properties, electronic structure and chemical bonding	72
Research on electromagnetic wave absorption properties of zinc-based acrylate resins for marine antifouling coating	72
Ru-doped Bi2O3 with rich oxygen vacancy for enhanced photocatalytic nitrogen reduction	72
Electrochemical and dielectric analysis of multifunctional GQDs@PEG@Mg-ZnFe2O4 ternary nanohybrid for low-frequency electronics, water splitting, and sustainable energy storage applications	72
Tunable crystal structure of Cu2SnS3 deposited by spray pyrolysis and its impact on the chemistry and electronic structure	71
Facile room-temperature colloidal synthesis of CsPbBr3 perovskite nanocrystals by the Emulsion-based ligand-assisted reprecipitation approach: Tuning the color-emission by the demulsification process	71
Structural, magnetic and transport properties of the quaternary Heusler alloy CoFeMnSn	71
Vehicle giga-casting Al alloys technologies, applications, and beyond	71
Optical properties of the double perovskite LaGeSbO6:Eu3 + phosphor with inversion symmetry under broadband excitation for personal identification and secure anti-counterfeiting ink	71
Modulation of magnetic and dielectric properties by Al3+ substitution in Ca3CoMnO6 ceramics	71
Preparation and characterization of cordierite-based ceramic foams with permeable property from asbestos tailings and coal fly ash	71
Enhanced electrochemical performance of Tb3+ ions doped cobalt nanoferrite electrodes for supercapacitor application	70
Effect of Fe content on the microstructure and mechanical properties of Fex(CoCrNi)100-x multi-principal element alloys	70
Mechanism elucidation of Sn-Bi alloy lapping plate surface instability	70
Thermoelectric properties of A1−	70
Innovative architecture of a multi-walled carbon nanotube-nickel tungstate-integrated screen-printed carbon electrode for ofloxacin detection in human samples	69
Nanoindentation behavior of Al0.3CoCrFeNi high entropy alloy: Experimental study and crystal plasticity finite element simulation	69
Readily available preparation of BiOI/Cu2O/CuO ternary heterojunction films and their excellent solar-responsive photocatalytic performance	69
Microstructural evolution and anisotropic behavior of network-structured TiBw/Ti65 composites processed by dual-phase zone rolling	69
Bimodal precipitate-strengthened NiCoCrMoW multi-principal element alloy synergizing strength-ductility at ambient and cryogenic temperatures	69
Crystallographic orientation engineering of In2O3 channel via thickness modulation for high-mobility top-gate thin-film transistors	69
Interfacial band alignment optimization through gradient composition ZnxCd1-xS buffer layers for planar Sb2S3 solar cells	69
Enhanced visible light photocatalytic activity of ferroelectric BCZT- Ag₂O composites: Nanofiber vs. Nanopowder	69
Modulation of phase separation and high-temperature mechanical properties by L12 phase in AlCoCrFeMo0.05Ni₂ high-entropy alloy	69
Machine learning-driven design of high-entropy alloys: Phase prediction, performance optimization, and challenges	69
Electrochemical performance of Zn2VO4/ZnO nanocomposite material derived from Zn-V layered double hydroxides as a cathode for aqueous zinc ion battery	68
Design principles of low-activation high entropy alloys	68
Fabrication of ternary Ag/La-black TiO2−x photocatalyst with enhanced visible-light photocatalytic activity for tetracycline degradation	68
Heterogeneous MnCo2S4@Ni(OH)2 nanosheet arrays for asymmetric supercapacitors with improved stability and superior specific capacitance	68
Efficient degradation of tetracycline in actual water systems by 2D/1D g-C3N4/BiOBr Z-scheme heterostructure through a peroxymonosulfate-assisted photocatalytic process	67
Using direct high-pressure torsion synthesis to produce aluminium matrix nanocomposites reinforced with carbon nanotubes	67
Three-dimensional crumpled reduced graphene oxide/Co9S8 nanocomposites as efficient electrocatalyst for oxygen evolution reaction	67
Achieving a strength-ductility combination in VCoNi medium-entropy alloy via N alloying	67
Advanced performance of S and N co-doped Sb@CNFs with a 3D conductive network as superior lithium-ion battery anodes	67
Recovering copper ions from wastewater with chitosan to synthesize lead-free primary explosives	67
Constructing inverse opal antimony@carbon frameworks with multi-level porosity towards high performance sodium storage	67
Atomic-layer-deposited ZnSnO buffer layers for kesterite solar cells: Impact of Zn/(Zn+Sn) ratio on device performance	67
Effect of Y2O3 nanoparticles on powder plasma arc additive manufacturing of CoCrFeNiMn high-entropy alloys: Microstructure evolution and mechanical properties	67
Oxygen vacancy defect engineering in MoO2/Mo-doped BiOCl Ohmic junctions for enhanced photocatalytic antibiotic elimination	67
Evaluating electrocatalytic activity of metal-substituted hafnium diboride (Hf1-TMB2; TM = Ni and Co) toward water splitting	67
On the phase constituents of three CoCrFeNiX (X = B, Al, Ga) high-entropy alloys after prolonged annealing	67
In situ construction of Fe substituted palygorskite/FeS2 heterostructure for full-spectrum photocatalytic nitrogen fixation	67
Dynamic mechanical behavior of ultra-high specific strength lightweight Ti61Al16Cr10Nb8V5 multi-principal element alloy	67
Distinguishing contributions of metal binder and ceramic phase to mechanical performance of cermets at different temperatures	67
Microstructure and mechanical properties of friction stir processed Zn-Mg biodegradable alloys	66
Structural, thermal, and novel magnetic characteristics of e-beam irradiated PANI/Bi2Te3 composites for tunable applications	66
Enhanced mechanical properties and refined microstructure induced by micron Fe for additive manufactured Ti-Fe alloys	66
Hot cracking in Al-Cu-Mg alloys — Effects of liquid film characteristics and intermetallic compounds	66
Core-shell nanofibers of ZnFe2O4/ZnO for enhanced visible-light photoelectrochemical performance	66
Softening kinetics and mechanism during the annealing of an Al-Si alloy produced by laser powder bed fusion	66
Magnetic/optical assessments of RFeO3 (R=La, Pr, Nd, and Sm) ceramics: An experimental and theoretical discernment	66
Construction of micro-nano structured Si/C anode armed with rGO hollow spheres for high-performance lithium-ion hybrid capacitors	66
Enhancing the work hardening capability of lightweight refractory high-entropy alloys via bimodal heterostructure	66
Fe3O4@CNTs/WPU@CNF aerogel/Ag foam composites with a double-layer structure for absorption-dominated electromagnetic shielding performance	66
Chemistry evolution of LiFePO4-NaHSO4·H2O system during roasting and recovery of Li and Fe	66
Light absorption and photocatalytic activity enhanced by in situ formation of uniform TiO2 nanoparticles on two-dimensional Ti3C2T surface	65
Dependence of grain size on grain boundary diffusion mechanism of Nd-Fe-B sintered magnets	65
Effects of alloying elements on the microstructure of precipitation strengthened Co-based superalloys	65
Effect of Sc/Sm microalloying on microstructural and properties of Mg-2Zn-0.3Ca biodegradable alloy	65
ZnSn(OH)6 nanocube/ Zn2SnO4 nanowires yolk–shell hierarchical structure with tunable band gap for deep-UV photodetection	65
Oxygen vacancy mediated polymerization of pyrrole on MoO3 to construct dielectric nanocomposites for electromagnetic waves absorption application	65
Self-assembled flower-like structure of copper cobaltate nanosheets supported on nitrogen-doped carbon nanofibers as functional electrocatalyst for lithium/polysulfides batteries	65
Electrochemically alternating voltage induction and in-situ preparation of tin-based multiphase structures anode for sodium-ion batteries	64
Bimetallic MOF-derived oxides modified BiVO4 for enhanced photoelectrochemical water oxidation performance	64
Discovery of high thermoelectric performance of WS2-WSe2 nanoribbons with superlattice and Janus structures	64
Investigation into relationships between grain size distribution characteristics and mechanical properties in large-scaled complex titanium alloy castings utilizing LASSO regression	64
Synthesis and high electromagnetic wave absorption performance of carbon-enriched porous SiOC ceramics	64
Investigation on high EMI shielding effectiveness and shielding mechanism of spherical Ti3C2Tx microfilm prepared by spray-freezing	64
Investigation of HVOF sprayed novel Al1.4Co2.1Cr0.7Ni2.45Si0.2Ti0.14 HEA coating as bond coat material in TBC system	64
Creep strength of Mg-Y-Zn alloys containing long-period stacking ordered structures	64
Oxygen vacancies boosted photoelectrochemical performance of α-Fe2O3 photoanode via butane flame annealing	64
Large magnetocaloric effect in gadolinium-rich silicate NaGd9(SiO4)6O2	64
Low-loss NiZnCo ferrite composites with tunable magneto-dielectric performances for high-frequency applications	64
The role of β phase in the morphology evolution of α lamellae in a dual-phase titanium alloy during high temperature compression	64
The effect of Sr doping on the structural, mechanical, electronic properties and radiation tolerance of MgAl2O4 spinel: A first-principles study	64
Performance improvement of Li-rich Mn-based materials with the submicron-sized single-crystal morphology and cationic doping	63
Investigation for oxidation mechanism of CrN: A combination of DFT and ab initio molecular dynamics study	63