Diamond and Related Materials

Article	Citations
A flexible graphene ink temperature sensor based on ceramic fiber substrate for high-temperature applications	232
Exploring enhanced CFC gas adsorption on Pt decorated graphene-modified sheets: A density functional theory investigation	181
Effect of surfactant on the microstructure and microwave-absorbing properties of helical carbon nanotubes/doped barium ferrite composites	164
One step synthesis of carboxymethyl cellulose/graphene oxide composites for removal of copper ion from aqueous solution	161
The role of Ni on the structure and related properties of Ni/a-C:H film	153
Superamphiphobic properties of fluorine doped graphene prepared by RF-PECVD: EIS and first principle study	123
Editorial Board	122
Functionalized MWCNTs and bio-hemocompatible PMMA-MWCNT nanocomposites as electrode materials for non-enzymatic H2O2 sensors and potential supercapacitor applications	120
Constructing an S-scheme heterojunction by integrating In-doped BiOBr with mesoporous C3N4 for enhanced photocatalytic performance	119
A novel ethoxy terminated diamond surface grafted via electrochemical modification	116
Influence of H+ and F− on corrosion behavior of a-C coatings in bipolar plates for PEMFCs	107
Rational design of size-controlled spongy porous carbon microspheres with wide-frequency microwave absorption properties	102
Corrigendum to “Graphene-regulated bidirectional modulation Janus metamaterial for linear-to-circular polarization conversion” [Diam. Relat. Mater. 152 (2025) 111878]	99
Structural transformation of C+ implanted diamond and lift-off process	94
Electromechanical response of stacked h-BN layers: A computational study	93
Electrocatalytic activity of benzothiazole substituted cobalt phthalocyanine in the presence of detonation nanodiamonds	91
O3-assisted low-temperature preparation of marginal S and graphitic N co-doped graphene oxide as high-performance electrocatalyst for bisphenol A degradation	91
Effect of Xe plasma processing on characteristics of carbon nanotube-based field emission cathodes	91
Nitrogen-doped hollow carbon spheres as efficient metal-free peroxymonosulfate activator for degradation of organic pollutant	90
One step NaOH etched-modified pencil graphite for electrochemical sensing of dopamine neurotransmitter	89
Optimization of reduced graphene oxide yield using response surface methodology	88
Fabrication of rGO-modified ternary metal chalcogenide hybrid nanocomposite(rGO/Cu2MnSnS4) for high-performance supercapacitors	88
Fabrication of multiwall carbon nanotubes decorated with MoS2 nanoflowers for adsorption of Ag(I) from aqueous solution	86
Influence of fiber/matrix interface on the texture evolution and fracture toughness of C/C	78
Normally-off hydrogen-terminated diamond field effect transistor with a bilayer dielectric of Er2O3/Al2O3	78

The low temperature conduction mechanism in PSS-stabilized carbon quantum dots: Perspective materials for future space applications	77
Doped diamond nanowires for NO and NO2 adsorption and sensing: A DFT investigation	75
Preparation and performance study of sodium silicate-diamond composite thermal management materials	74
Numerical simulation and validation of pressure transfer mechanism between anvil and pyrophyllite block in high pressure high temperature cubic press	74
Spectroscopic characterization of yellow gem quality CVD diamond	70
Regulating diamond-induced pores in laser-cladded HEA/diamond coatings by thermal-fluid coupling	68
Possible exchange-bias in Fe-filled multiwall carbon nanotubes in presence of coexisting α-Fe and Fe3C phases	68
Effects of different binder systems on the reaction mechanism, microstructure and mechanical properties of PcBN composites	66
Green and eco-friendly scalable synthesis of chitosan-carbon nanocomposite for efficient dye removal	64
Friction behavior of 2D hydrogenated diamond-like films and bilayer graphene	62
Synthesis and characterization of FMWCNTs/ZnO doped PVDF nanocomposites for enhanced mechanical, dielectric, and radiation shielding properties	61
Electrochemical and optoelectronic properties of the flower shaped MnCoFeO4@rGO thin film	60
Fractional deposition: Enhancing the bond strength between diamond-like carbon with high sp3/sp2 ratio and alumina	60
Interface scattering induced low thermal conductivity in Ag2Se/MWCNT for enhanced thermoelectric application	57
Graphite-doped flexible conductive hydrogel temperature-strain sensor	57
Structural modification in bulk synthetic diamond by ultrashort mid-IR laser pulses	56
Theoretical exploration of fullerene-based X-Y@C80 (X = in, Sb, Te) nanomaterials as sensors for Thioguanine	56
Editorial Board	55
Synthesis of super-hydrophobic and self-cleaning magnetic graphene aerogel with excellent microwave absorption properties	55
An investigation on the compositional effects of 3D graphite on the electrochemical performance of NiO-Co3O4 composite	55
The effect of catalyst shape on diamond growth	54
Construction of S-scheme heterojunction CeCuO3/g-C3N4 photocatalyst for degradation of tetracycline under visible light	54
A study of the friction and thermal properties of epoxy composites synergistically reinforced by open-celled Cu foams and carboxylated CNTs	54
Terahertz bandwidth absorption metamaterial based on composite structure of single layer graphene	53
Enhanced holding ability between resin and silanization modified diamonds through sintering Si N bond formation at low temperature	53
Design of optically pumped ultrahigh-performance terahertz sensors based on graphene metamaterials	53
Performance evaluation of DLC coated tools in high-speed micromilling of carbon fibre reinforced plastic	53
Improvement the formaldehyde sensing and detection through Pt-doped graphdiyne monolayer: Quantum chemical study	53
Photoresponse properties of green-assisted Fe3O4 nanoparticles supported activated carbon	52
Designing superhard B - N compounds with distinct conductive channels through vacancy introduction strategy	52
g-C3N4@Mn-TiO2 nano sorbent for efficient decontamination of lead from water systems	51
Mechanism of high-quality N-doped reduced graphene oxide aerogel synthesis for dye-sensitized solar cells	51
Arginine-functionalized graphene quantum dots@palladium composite modified pencil graphite electrode for electrochemical detection of DNA-mitomycin C interaction	51
NiO nanoparticles/graphene nanocomposite as high-performance pseudocapacitor electrodes: Design and implementation	49
One-step hydrothermal synthesis and highly gas sensing properties of ZnFe2O4/rGO composite materials	48
Porous carbon-MnO2 heterostructures for high energy density aqueous ammonium-ion asymmetric supercapacitors	47
Tribology of self-mated siliconized graphite under high pv factors in high-temperature and high-pressure water	47
Production and characterization of biochar and modified biochars by carbonization process of bearberry (Arctostaphylos uva-ursi. L.): Adsorption capacities and kinetic studies of Pb2+, Cd2+ and rhodam	46
Effect of laser power on the structure and specific surface area of laser-induced graphene	46
Rhn (n = 1, 2) modified C3N: A potential candidate for H2S, SOF2, SO2F2 and SO2 detection and scavenging	46
Synergetic effect of multiwalled carbon nanotubes on mechanical and deformation properties of engineered cementitious composites: RSM modelling and optimization	45
Improved proton conduction in graphene oxide membranes via incorporation of acid-base functional silanes	45
Evolution of mechanical and thermal properties of diamond under external stress	45
Photocatalytic activity of composite material-based nylon 6/sulfur NPs and reinforced carbon nanotubes	45
Radon adsorption by carboxyl, phosphate and amine functionalized hexagonal boron nitride as predicted by density functional theory: An approach to radiation protection and environmental pollution cont	45
Optimal synthesis of Ag modified g-C3N4 for improved visible light photocatalytic performance and self-cleaning applications	45
Magnetron sputtering TiZrNbTa HEA coating on CVD single crystal diamond for improving its solderability with Cu	44
Synthesis of graphene reinforced aluminum nanocomposites with enhanced mechanical and tribological properties by solidification processing	44
Effects of processing parameters and grinding direction on the material removal mechanism of (100) surface single crystal diamond in self-rotating mechanical grinding	44
Tailored synthesis of a palladium catalyst supported on nitrogen-doped carbon nanotubes for gas-phase formic acid decomposition: A strong influence of a way of nitrogen doping	43

From MAX to MXene: A case study of Sc2TlC MAX phase, Sc2C pristine MXene, and surface-functionalized Sc2CT2 (T=O, F) MXenes	43
Weak oxidant fraction in the microwave plasma influencing the evolution of nanocrystalline-diamond–imbedded diamond–like carbon network at low temperatures and its orbital hybridization dependent wide	43
Facile synthesis of tofu-derived N, O-codoped porous carbon loaded with rGO as a high-performance supercapacitor cathode	43
Biomorphic porous carbon derived from reed with enriched oxygen-functional groups for high-performance supercapacitors	43
A comparison study of the strengthening effect of carbon nanomaterial reinforcements in the 3D skeleton-reinforced copper matrix composites	43
Spectroscopic investigation of the diamonds from the Mir pipe (Yakutia) irradiated at low temperature	42
Microwave absorption properties of flexible fabric coating containing Ni decorated carbon fiber with frequency selection surface incorporation	42
Carbonized rice husks as absorber materials for solar-driven steam generation devices	42
Saffron waste-derived Co3O4-Ag/activated carbon nanocomposites for simultaneous removal of dye pollutants under visible and solar irradiation	42
Vibronic property of NV− and NV0 centers in diamond and the thermal behavior of zero-phonon lines	42
Sustainable hierarchically porous B/N/P co-doped carbon from bamboo waste as a dual-functional electrode for high-performance energy storage	42
Synergetic effect enabling high thermal conductivity in Cu/diamond composite	42
Magnetically aligned Co-C/MWCNT/polyacrylamide with directional thermal conduction for enhanced electromagnetic wave absorption by synergistic engineering of dielectric and magnetic loss	42
Low-temperature compositing of graphene to nanodiamonds by thermal reduction of graphene oxide and photocatalytic properties	41
Switchable visible and near-infrared light bifocal lens based on hybrid graphene-metasurface structures	41
Electrochemical CO2 reduction properties of boron-doped diamond powder	41
Hierarchical architectures of rGO-supported nanoneedle-like MgCo2O4 arrays with improved supercapacitor performance	41
Dynamic wetting of low-index diamond planes and polycrystalline diamond with H-terminated and O-terminated surfaces	41
Poria cocos-derived carbon dots for cellular imaging, free radical scavenging and pH sensing	41
Effective modified MWCNT super adsorbent for oxygen and nitrogen adsorption	40
Hydrogen implantation-induced blistering in diamond: Toward diamond layer transfer by the Smart Cut™ technique	40
Self-glowing single crystal diamond activated with carbon-14: First synthesis and characterization	40
Ultrafast degradation of methylene blue from aqueous media by Fe3O4/rGO/SiO2 magnetic nanocomposite in dark catalyst process	40
Optical and dielectric behaviors of polyvinyl chloride incorporated with MgFe2O4/MWCNTs	40
Preparation, characterization, and electrochemical performances of activated carbon derived from the flower of Bauhinia variegata L for supercapacitor applications	40
Spatial distribution of thermally induced residual stresses in HF-CVD diamond coatings on microstructured steel surfaces	40
Novel N-doped ZnO and O-doped g-C₃N₄ heterojunction: Enhanced photocatalytic degradation and robust electrochemical biosensing of ascorbic acid	40
Flexible micro-strain graphene sensors enhanced by laser-induced cracks for health monitoring	39
Theoretical study of n-type diamond with Li doping and Li-B co-doping: A density functional simulation	39
Voltammetric detection of paracetamol using a novel Sonogel-Carbon material modified with monocalcium phosphate: An experimental and theoretical approach	39
Tunable terahertz filter using graphene for refractive index sensing	38
Electrocatalytic study of graphene anchored FeMoO4 nanohybrid for robust water splitting	38
Magnetic bismuth sulfide-decorated activated carbon nanocomposite for ultrasensitive electrochemical determination of felodipine in real samples	38
Reinforcing potential of MWCNTs on mechanical and machining performance of hot-pressed ZTA-MgO ceramic cutting inserts	38
Boron nitride and ZIF-67 composite material to improve the long term corrosion resistance of epoxy resin coating	37
Above-bandgap and sub-bandgap photoelectron emission from diamond‑silver nanocomposite thin films	37
Synthesis of biomass-based triple-emission carbon dots for dopamine sensing	37
Improving aqueous lithium-sulfur battery efficiency through tuned sulfur@hydroxyl functionalized graphene nanocomposites	37
A new soft-hard carbon composite derived from petroleum coke and glucose for high-performance sodium storage	37
RETRACTED: Facile synthesis of environmental friendly Sm2O3/rGO electrode as an alternative source for energy storage devices	37
Mechanistic insights into photocatalytic degradation of dyes and pesticides using glucose reduced GO modified with CuCr2O4/SiO2	36
Flexible pressure sensor based on multi-layer with gradient structure P(VDF-HFP)/MXene/BaTiO3 composite film for human motion monitoring	36
A DFT study of adsorption properties of SO2, SOF2, and SO2F2 on ZnO/CuO doped graphene	36
Ultrafast flame coating of carbon and chemical vapor deposition of graphene on NiTi alloy to enhance its corrosion resistance	35
Fabrication of a magnetic retrievable dual Z-scheme g-C3N4/BiVO4/CoFe2O4 composite photocatalyst with significantly enhanced activity for the degradation of rhodamine B and hydrogen evolution under vi	35
Terahertz refractive index sensor based on tunable patterned graphene absorber	35
Effect of reinforcement amount on the microstructural and mechanical properties of mechanically alloyed graphene nanoplatelet reinforced Al-3.5 wt% Cu composites	35
Simultaneously enhanced electro-mechanical properties of CNTs/Cu-20wt.%Mo composite material by regulating interface with Mo2C nanoparticles	35
Control of NV, SiV and GeV centers formation in single crystal diamond needles	35
Boosting supercapacitor performance through the facile synthesis of boron and nitrogen co-doped resin-derived carbon electrode material	35
Hydrogen-related defects in diamond: A comparison between observed and calculated FTIR spectra	35
Effect of heat-treatment of Ti/graphite powders on the microstructure and mechanical properties of reactive plasma sprayed TiCN coatings	35
Irradiation and annealing of type II HPHT-grown diamonds	34
Synthesis of biomass derived N, S co-doped carbon dot/CuHCF composite for enhancing electrochemical sensing performance of creatinine detection	34
Performance and wear mechanism of PCD tools in precision turning gray cast iron HT250 under dry and cryogenic internal cooling conditions	34
Single-layer c-BN−terminated hexagonal diamond (001) surfaces for nitrogen-vacancy based quantum sensors from first principles	34
Rational design of ternary-metal LDH nanoflowers anchored on reduced graphene oxide for bifunctional electrocatalysis in alkaline water splitting	34
The deposition of low friction coefficient micro-diamond films on Ti6Al4V alloy by HFCVD	33
Theoretical investigation on the adsorption behaviour of tyramine neurotransmitter onto B12N12 nanocage	33
HTHP treatment of diamonds containing N1 centers. Neutral state of the N1 center as a limiting step in the aggregation of substitutional nitrogen into A form	33
Wear characteristics of brazed diamond saw blade in cutting 304 stainless steel	33
Insights into the mechanical and thermal transport properties of 2D BxCyNz from machine-learned interatomic potentials	33
Microstructural investigation and performance of carbon matrix composites developed through facile pitch modification route	33
Graphene-based metasurface for real-time control of three electromagnetic wave modes and polarization state	33
Boosting the water splitting and hydrogen production of S-scheme fabricated porous g-C3N4 modified with CuO	33
Analytical model of modified diamond tools temperature by focused ion beam in dry diamond turning	32
LHDAC synthesis of nanopolycrystalline diamond from nano-flake-like graphite	32
Structure formation in concentrated aqueous dispersions of detonation nanodiamond: experiment and theory	32
Synthesis and characterization of acrylic hexagonal boron nitride nanosheets for thermally stable polymethylmethacrylate composites	32
Biomass carbon materials with porous array structures derived from soybean dregs for effective electromagnetic wave absorption	32
Effect of treatment process on CVD diamond coatings deposited on WC − Co substrate with different Co contents	32
The interaction of H2O, O2 and H2O + O2 molecules with g-C3N4 surface:A first-principle study	32
Surface morphology and transformation mechanisms of polycrystalline cubic boron nitride under 120-ns pulsed-laser ablation	32
First-principles study of penta-graphene/MoS2 vdW heterostructure as anode material for lithium-ion batteries	32
Controlling magnetic skyrmions in co/graphene via electric field	32
Enhanced electrodynamic properties acrylonitrile butadiene styrene composites containing short-chopped recycled carbon fibers and magnetite	32
Understanding the tribo-corrosion behaviors and mechanism of Si/N-DLC films in marine environment	32
Low-pressure hot isostatic pressing for the fabrication of carbon electrode-based hole-transporting material-free perovskite solar cells	31
Nanocomposite materials based on amorphous SiC-containing DLC structures modified with rhodium nanoparticles	31
Characterization of a carbon nanotube-based X-ray microbeam generation system for low-dose radiobiology	31

Direct synthesis of sodium doped Cu2O/GO nanocomposites for catalytic hydrogen production from NaBH4	31
Tunable electronic properties of diamond (100) surface via boron-nitrogen co-termination: A first-principles study	31
Structural, electronic, dynamical, and optical properties of inorganic and hybrid azugraphene-like structures	31
Preparation and synergistic performance testing of laminated composite lapping tools	31
A novel method to synthesis of oxygen doped graphitic carbon nitride with outstanding photocatalytic efficiency for the degradation organic pollutants	31
Mechanical properties of trigraphene nanosheets: Dimension, temperature, defects, and multi-layer effects in armchair and zigzag configurations	31
Role of carbon quantum dots in a strategic approach to prepare pristine Zn2SnO4 and enhance photocatalytic activity under direct sunlight	31
Employing metal-doped carbon nanocones for the drug delivery of purinethol anticancer: Insights from DFT calculations	31
Influence of graphene nanoplates and titanium diboride particulate on wear and interfacial bonding properties of sintered aluminium alloy composites	31
Efficient water splitting catalyst: Low-temperature selenization of Co and Ni hydroxide nanosheets on carbon cloth for enhanced electro-catalytic activity	31
Tunable plasmonic optical responses and the sensing application in graphene-based metasurface	31
Mesostructured nitrogen-rich C3N5 materials grafted with alkyl bromide for solvent-free and metal-free cycloaddition of CO2 to propylene carbonate	31
Strongly bonded CF @S composite assisting the long-cycle stability of Li-S battery	31
The effect of 1 MeV electron irradiation on charge carrier localization in graphene quantum dot array of reduced graphene oxide	31
Binder-free high-pressure, high-temperature surface-porous boron-doped polycrystalline diamond for electrochemical degradation of organic pollutants	31
Heating and cooling dynamics for diamond-based hybrid heater-thermometers in aqueous media	31
Porous activated carbon and highly redox active transition metal sulfide by employing multi-synthesis approaches for battery-supercapacitor applications	30
Preparation and performances of conductive, wear-resistant, and anti-corrosion coatings based on low content monodisperse SWCNTs	30
ZnO quantum dots decorated carbon nanotubes-based sensors for methanol detection at room temperature	30
Copper oxide incorporated ball-mill produced less-defective graphene for hybrid supercapacitors	30
Partially adsorption of hydrogen and fluorine-dependent thermoelectric performance enhancement in single-layer armchair graphene nanoribbons	30
First-principles study on the effects of fast neutron irradiation and fast neutron irradiation under the external electric field on carbon-based material AB bilayer graphene	30
Antibacterial properties of metal nanoparticles–incorporated activated carbon composites produced from waste biomass precursor	30
Investigation of the Y centers in cubic plastically deformed type Ib diamonds (Yakutia placers)	30
Fe/Fe3O4/biomass carbon derived from agaric to achieve high-performance microwave absorption	30
Effect of diamond layer thickness on tool wear of polycrystalline diamond composites	30
Gas molecules adsorption on the α-Graphyne nanosheet for the sensor applications	30
Modulation of bonding structure and mechanical properties of DLC coatings by binary doping: Molecular dynamics simulation	30
Annealing process and temperature effects on silicon-vacancy and germanium-vacancy centers in CVD grown polycrystalline diamond	30
Modulating surface electron density of hydrophilic/high-conductive MXene/Ni(OH)2/NF heterostructures for efficient asymmetric supercapacitors	30
Accelerate the design of new superhard carbon allotropes in Pca21 space group: High-throughput screening and machine learning strategies	30
High-performance g-C3N4 coated single-walled carbon nanotube composite films for flexible thermoelectric generators	30
Electronic properties of c-BN/diamond heterostructures for high-frequency high-power applications	30
Prussian blue analogue-derived Co-Ni5P4 porous nanosheet arrays composite coal-based carbon nanofibers as efficient self-supported electrocatalyst for overall water splitting	30
Microstructure, mechanical and tribological properties of Ti doped ta-C films deposited by a hybrid coating system	30
Programmable manipulation of terahertz beams by hybrid graphene-metal coding metasurfaces	30
Interfacial microstructure and thermal damage of brazed diamond joints with Ni-Cr + Cu/C composite filler alloy	30
Polishing of ultrahard nanotwinned diamond tool for producing nearly damage-free tool surface and highly sharp cutting edge	30
Submicron spherical carbon modified boron-doped diamond for sensitive detection of sertraline hydrochloride	30
Bio-sourced Fe-doped carbon dots for dual-mode fluorescence and colorimetric sensing of 4-nitrophenol	29
RGOs-AgNPs/PVA composite sponges for efficient solar saltwater evaporation	29
Polydopamine-assisted silver-coated spherical boron nitride as dual functional filler for thermal management and electromagnetic interference shielding	29
Effect of CNTs concentration on the microstructure and properties of B, Ni, CNTs co-doped diamond like carbon films	29
Study on removal mechanism of polycrystalline diamond wafer by grinding containing transition metals	29
A reduced graphene oxide-based electrochemical sensing and eco-friendly 4-nitrophenol degradation	29
Quantitative analysis of the uniformity of CVD diamond nucleation via Kullback-Leibler divergence	29
WO3·0.33H2O/carbon quantum dots hybrid nanostructures for efficient electrochemical hydrogen evolution reaction	29
TiO2/carbon composites from waste sawdust for methylene blue photodegradation	29
Electrochemical performance of FeNbO4/rGO as an electrode material for supercapacitor application	29
Fabrication of visible-light-driven rGO decorated CeO2/V2O5 nanohybrids for highly enhanced photocatalytic degradation of tetracycline antibiotic	29
Nb-doped hydrogenated diamond-like carbon coated biodiesel injectors material: Synthesis, structure and properties	28
Fluorescent carbon quantum dots as a novel solution and paper strip-based dual sensor for the selective detection of Cr(VI) ions	28
Preparation of N-doped reduced graphene oxide/cobalt nickelate composites with excellent electromagnetic wave absorption	28
Hybrid of carbon quantum dots modified g-C3N4 nanosheets and MoS2 nanospheres: Indirectly promote hydroxyl group production for efficient degradation of methyl orange	28
Study on Hansen solubility parameters of nanodiamonds and its predictive role on dispersion states in polyethylene oxide casting with different solvent media	28
In situ high-temperature transmission electron microscopy of tantalum/carbon composite films under near-infrared laser irradiation	28
Molecular dynamics study of amorphization and defects induced by argon ion implantation into single crystal diamond	28
Ba2+ removal from aquatic medium via TiY2O5@g-C3N4 nanocomposites	28
Integration of polycrystalline diamond heat spreader with AlGaN/GaN HEMTs using a dry/wet combined etching process	28
Sulfur-doped graphitic carbon nitride decorated with starch, Fe3O4, and Ag nanoparticles: As efficient and magnetic recoverable nanocatalyst for hydrogenation of nitroaromatics in aqueous media	28
Outside Front Cover - Journal name, Cover image, Volume issue details, ISSN, Cover Date, Elsevier Logo and Society Logo if required	28
Adhesion effects on free-standing indentations for graphene oxide	28
Nitrogen self-doped porous carbon based on sunflower seed hulls as excellent double anodes for potassium/sodium ion batteries	28
Development and fabrication of transition metal based rGO nanocomposite for ultracapacitors applications	28
Time-dependent characterization of graphene quantum dots and graphitic carbon nitride quantum dots synthesized by hydrothermal methods	28
Laser slicing of a diamond at the {100} plane using an irradiation sequence that restricts crack propagation along the {111} plane	28
Unveiling bandgap behavior of chiral carbon nitride nanotubes	28
Catastrophic degradation of cold cathodes during the flow of increased emission currents	28
Shell layer oxygen vacancies enhance the microwave-absorbing properties of TiN@CN/WO3- multiple heterogeneous materials	28
Paramagnetic transitions and weak-diamagnetism in sulfur-doped buckypapers and graphene-oxide composites	28
Innovative Al2O3-ZnO-TiO2@rGO nanocomposites: A versatile approach for advanced water purification, biomedical devices, and environmental remediation	28
Two-dimensional porous flake biomass carbon with large layer spacing as an anode material for sodium ion batteries	27
Effects of urea versus N2 addition on growth and mechanical properties of HFCVD diamond films on WC-Co substrates	27
Modelling of blue luminescent color centers in brown diamond: A density functional theory study	27
From waste to wealth: Crumb rubber@carbon nanotube/Fe3O4 composites towards highly effective electromagnetic microwave absorption with wide bandwidth	27
Novel nanocarbons via facile one-pot combustion synthesis	27
Femtosecond laser writing of low-loss waveguides with different geometries in diamond	27
A multifrequency narrow-band perfect absorber based on graphene metamaterial	27
Ultrahigh photocurrents and polarization sensitivity of BC6N/Janus MoSSe heterostructure photodetector with asymmetric contacts	27
Point defects in coated diamonds	27
Enhanced sensitivity of partial O-terminated H-diamond for H2S detection at room temperature	27
Comparison of heat transfer performance of water-based graphene nanoplatelet- and multi-walled carbon nanotube-nanofluids in a concentric tube heat exchanger	27
Improving tribological performance of porous oil-impregnated GO/PA6 composites with double lubrication structure	27
Ultrathin tunable UWB metasurface absorber design by exciting plasmonic modes in bilayer graphene stack	27
Transforming water-soluble carbon dots with high particle size regularity as the high-performance oil-based lubricant additives by one-step surface modification	27
Synergistic effect of boron nitride and graphene nanosheets on behavioural attitudes of polyester matrix: Synthesis, experimental and Monte Carlo simulation studies	26
Enhanced hydrogen gas adsorption properties of B, N, and Au co-doped graphene in o-, m-, and p-configurations: DFT study	26
Enhanced electrochemical performance of Bi doped Ni3Se2/rGO composite synthesized via hydrothermal method	26
Synthesis of NiCl2-enhanced carbon electrodes from oil palm fronds (Elaeis Guinness Jacq) for high-performance supercapacitor	26
High pressure induced formation of carbon nanorods from tetracosane	26
Nickel oxides nanoparticles decorated carbon nanohybrid as efficient electrocatalyst for the detection and remediation of environmentally hazardous mesotrione	26
Tailored expanded graphite based PVDF porous composites for potential electrostatic dissipation applications	26
Engineering of ethylenediamine-functionalized 0D carbon dots for optical bi-mode determination of Hg(II), fluorescent sand, and logic gate operations	26
Investigation on photocatalytic activity of g-C3N4 decorated α-Fe2O3 nanostructure synthesized by hydrothermal method for the visible-light assisted degradation of organic pollutant	26
Pore-making strategy of bagasse-based heteroatom-doped porous carbon in chromium adsorbents	26