Diamond and Related Materials

Papers
(The TQCC of Diamond and Related Materials is 9. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Environmental remediation applications of MxOy-gC3N4 nanocomposites (M =  Mg, Ti, and Zn): Photocatalytic activity for Indigo carmine dye degradation153
Pristine and Si-doped fullerene-C24 as a novel nanosorbent for the adsorption and removal of primidone from wastewater: A DFT study146
Synthesis and Kinetics of Vanadium and Niobium Carbide coatings on Diamond nanoparticles using Vacuum-Assisted Molten Salt Synthesis144
Template-free fabrication of high N/S co-doped carbon frameworks for stable and high-capacity potassium-ion storage128
XANES simulations of diamond-like bidimensional materials114
Synthesis of graphene reinforced aluminum nanocomposites with enhanced mechanical and tribological properties by solidification processing114
Tuning the capacitance of graphene-based materials as negative electrode materials for supercapacitor applications87
A new staining method using different targeted fluorescent carbon dots for tissue sections analysis and diagnosis86
Editorial Board83
One-step hydrothermal synthesis and highly gas sensing properties of ZnFe2O4/rGO composite materials82
Exploring the superhard potential of two diamond-like carbon allotropes80
Decoration of multi-walled carbon nanotubes with nickel oxide quantum dots for high-performance electrochemical supercapacitors79
Green reduction of graphene oxide induced by combined basic amino acids and ultrasound cavitation75
Surface photovoltage spectroscopy for defect investigation of diamond74
Structural modification in bulk synthetic diamond by ultrashort mid-IR laser pulses70
Lignin-derived green-emitting carbon quantum dots for sensitive fluorometric detection of water in ethanol69
Nanomolar detection and electrochemical mechanism of nintedanib via square-wave voltammetry using a MWCNT-modified glassy carbon electrode67
(Mg-Fe) LDHs decorated 3D reduced graphene oxide nanocomposite for adsorption of ciprofloxacin and norfloxacin66
Aluminium bismuth oxide (AlBiO3) with reduced graphene oxide (rGO) nanocomposite: A robust and efficient electrode for oxygen evolution reaction (OER)66
Theoretical exploration of fullerene-based X-Y@C80 (X = in, Sb, Te) nanomaterials as sensors for Thioguanine66
Tunable terahertz filter using graphene for refractive index sensing66
Influence of cell phenotype and surface modifications on the cytotoxicity of fluorescent nanodiamonds65
Fabrication of diamond drum resonators via laser engraving and Si wet etching for high precision temperature sensing65
Machine learning-driven performance predictions in ammonia-fueled molten carbonate fuel cells: A comprehensive study on experimental data62
MOF-derived MoS2/nitrogen-doped graphene aerogel for supercapacitor electrodes61
Field emission properties of patterned carbon nanotube cathodes prepared by cold-pressing method60
Radon adsorption by carboxyl, phosphate and amine functionalized hexagonal boron nitride as predicted by density functional theory: An approach to radiation protection and environmental pollution cont60
Green biosynthesized NiFe2O4 coated with rGO for efficient photocatalytic degradation of plastic additives: Synthesis, mechanism, and kinetics60
2D boron nitride synthesis via electromagnetic induction heating: Experiments and thermochemical modeling60
Enhancing heat exchanger efficiency with carbon-based nanofluids: An experimental and numerical study58
Spectroscopy of green fluorescence rims on rough pink diamonds from Argyle mine58
Synergistic mechanism of HVOF coating and PVD film in tribo-corrosion behaviors of Cr3C2-NiCr/DLC duplex coatings57
Construction of boron carbide phase to improve the thermal insulation and mechanical properties of carbon aerogel56
Controllable preparation of solid-state fluorescent polymer dots by gaseous detonation56
Dynamic wetting of low-index diamond planes and polycrystalline diamond with H-terminated and O-terminated surfaces56
Molecular dynamics simulation and experimental study of the rheological performance of graphene lubricant oil55
An effective pre-burning treatment boosting adsorption capacity of sorghum distillers' grain derived porous carbon55
Effects of different binder systems on the reaction mechanism, microstructure and mechanical properties of PcBN composites52
Effect of fullerene C60 thermal and tribomechanical loading on Raman signals51
Photocatalytic degradation of organic dyes using zinc oxide-decorated graphitic carbon nitride composite under visible light49
Modified Ag-ZnO coated graphene oxide ternary composite for superior photocatalytic degradation of crystal violet dye under visible light irradiation49
A comparative study on the effects of multi-walled carbon nanotubes and graphene nanoplates incorporated for improved thermal conductivity and dielectric properties of polyvinyl chloride49
Corrosive behavior and interfacial conductivity of stampable a-C film on titanium bipolar plate in proton exchange membrane fuel cells49
Significant promotion of the anti-corrosive performance of epoxy zinc-containing coating via in situ reduction of graphene oxide and simultaneous graft it with polyamide curing agent48
Preparation and characterization of Bi12TiO20/RGO as high-efficiency photocatalysts for degradation of dye wastewater48
Sensing ivacaftor accomplished using the square-wave voltammetric technique with the assistance of a cationic surfactant on a boron-doped diamond electrode47
The 7-in. freestanding diamond thermal conductive film fabricated by DC arc Plasma Jet CVD with multi-stage magnetic fields47
Influence of polishing on diamond epitaxial film using vacuum-ultraviolet assisted polishing46
Hydrogen encapsulation properties of heteroatoms doped fullerenes: A DFT study for potential hydrogen storage application46
Fabrication of high aspect ratio diamond tip using reactive ion etching45
Influence of raw material on the morphology and photocatalytic properties of graphene oxide45
Effect of carbide transition layer on enhancing heat transport across graphite/cu heterogeneous interface44
Construction of S-scheme heterojunction CeCuO3/g-C3N4 photocatalyst for degradation of tetracycline under visible light44
Outside Front Cover - Journal name, Cover image, Volume issue details, ISSN, Cover Date, Elsevier Logo and Society Logo if required44
Carbon nanotube-assisted detection of methylated cytosine: A DFT study for epigenetic biomarker analysis43
Global flattening realization and kinematic analysis of UV-assisted low-speed 3D dynamic friction-polished diamonds43
The role of Ni on the structure and related properties of Ni/a-C:H film43
Corrigendum to “Graphene-regulated bidirectional modulation Janus metamaterial for linear-to-circular polarization conversion” [Diam. Relat. Mater. 152 (2025) 111878]43
Effect of the gravitational force on electrical alignment of diamond filler particles in polydimethylsiloxane-based heat-conduction sheets42
Nanoscale smooth and damage-free polycrystalline diamond surface ground by coarse diamond grinding wheel42
The synergistic effect of vertical structural parameters of vertical-type two-dimensional hole gas diamond MOSFETs on improving the overall performance of devices based on TCAD simulation42
Heterojunction-based and structure-engineered construction of Cs3Bi2Br9/g-C3N4/PDMS photocatalytic flexible s with three-dimensional interpenetrating uniform pores42
Sulfur-infused multi-layer graphene elevating aqueous lithium-sulfur battery lifespan42
Improving thermoelectric properties of Bernal bilayer graphene by strontium intercalation: A DFT study41
Exploring enhanced CFC gas adsorption on Pt decorated graphene-modified sheets: A density functional theory investigation40
DFT investigation of transition metal-doped graphene for the adsorption of HCl gas40
Design and computational evaluation of structural, electronic and optical properties of the oligomers of nC20 fullerene (n = 1–6)39
Separating B/N co-doped armchair graphene nanoribbons by hydrogen atom chains: Based on first-principles study39
Graphene synthesis by electromagnetic induction heating of oxygen-rich copper foils39
Optimization process of porous carbon derived from coconut shell: A novel preparation condition and investigation on pore surface roughness39
In-situ conversion of amorphous carbon to graphene enhances the oxidation resistance of dendritic copper powder39
A novel PAN/GO electrospun nanocomposite fibrous membranes with rich amino groups for highly efficient adsorption of Au(III)38
Photoluminescence and solid-state LED application based on pH-sensitive carbon quantum dots38
Microstructure and mechanical properties of vacuum brazed diamond abrasive segments with zirconium carbide reinforced Cu-based active filler metals37
Enhanced thermal stability of Ga2O3 MOSFETs with nanocrystalline diamond field plate37
Interfacial characteristics and grinding performance of diamond specimens brazed with Cu-Sn-Ti alloy and Ti3AlC2-metal composite filler metal37
Normally-off hydrogen-terminated diamond field effect transistor with a bilayer dielectric of Er2O3/Al2O337
MnCo2O4/activated carbon wheat husk (ACWH) as a novel electrode material for electrochemical capacitors37
Production of functionalized graphitic carbon materials via solvent-free mechanochemical method for supercapacitors and water treatment36
Outside Front Cover - Journal name, Cover image, Volume issue details, ISSN, Cover Date, Elsevier Logo and Society Logo if required36
Local resonance mechanism for enhancing the thermoelectric performance of PBCF-graphene nanoribbons36
Editorial Board36
Impregnating graphene oxide into polyvinylsulphonic acid–sterculia gum hydrogels to modulate antibiotic drug vancomycin interactions for controlled drug delivery applications36
Impressive reinforcement on the anti-corrosion ability of the commercial fluorocarbon paint via nitrogen-doped super-easily-dispersed graphene36
Preparation, characterization, and electrochemical performances of activated carbon derived from the flower of Bauhinia variegata L for supercapacitor applications36
DFT study of SCN− adsorption effect on structural and electronic properties of Si12C12 fullerenes35
Electrical and structural behavior of copper nanocomposites encapsulated with modified graphene oxide graft and carbon nanotubes (cu@GO-g-CNTO-amine/PCA) on copper pieces35
Radial channel boosting stress release in hollow carbon spheres for high-rate sodium ions storage35
Synergistic electrochemical and optical properties of a UVC class quaternary nanocomposite incorporating graphene oxide and samarium chromium oxide perovskite35
Multi-band, tunable, high figure of merit, high sensitivity single-layer patterned graphene—Perfect absorber based on surface plasmon resonance34
Development of differential amplifier circuits based on radiation hardened H-diamond MOSFET (RADDFET)34
Photoelectrically-excited terahertz metasurface for switchable and tunable broadband propagation and polarization manipulations33
Comprehensive study on dielectric properties and proton conductivity of graphene oxide (GO) embedded PVdF/PVP membrane electrolytes33
Magnetic field dependent thermal conductivity investigation of water based Fe3O4/CNT and Fe3O4/graphene magnetic hybrid nanofluids using a Helmholtz coil system setup33
Sulfonic acid-type hydrothermal carbon microspheres as stable, efficient catalysts for transesterification reactions32
A novel mesoporous CoMn2O4@rGO composite as an electrode material for hybrid supercapacitor for energy storage device applications32
Hydroxyapatite-based bio-ceramic of ternary nanocomposites containing cuprous oxide/graphene oxide for biomedical applications32
Flexible micro-strain graphene sensors enhanced by laser-induced cracks for health monitoring32
Synthesis of super-hydrophobic and self-cleaning magnetic graphene aerogel with excellent microwave absorption properties32
The effects of the CNF ratio on the microstructure, corrosion, and mechanical properties of CNF-reinforced diamond cutting tool32
Porous niobium carbide as promising anode for high performance lithium-ions batteries via cost-effective processing32
Microstructure and properties of PAN-based carbon fiber with different graphitization temperature (up to 3000 °C)31
Preparation of N-doped biomass C@SnO2 composites and its electrochemical performance31
Sulfur-doped silicon carbide nanotube as a sensor for detecting liquefied petroleum gas at room temperature31
Mechanical properties of aluminium-graphene core shell nano-composite: A molecular dynamics simulation study31
Broadband terahertz absorber integrating polarization conversion and filtering functions31
The electronic transport properties of armchair carbon nanotubes with single and multiple horizontal boron-nitride lines: Unusual effects of high bias voltage on I-V characteristics31
A eco-friendly, green synthesis of Ag loaded WO3/rGO nanocomposites for effective UV light photocatalytic degradation of 4-nitrophenol and antimicrobial activity31
Electronic properties of diamond nanowires under an external electric field31
4-6 carbophene: A two-dimensional carbon material with Dirac cone and superior activity for electrochemical oxygen reduction reactions31
Self-doped (N/O/S) nanoarchitectonics of hierarchically porous carbon from palm flower for high-performance supercapacitors31
Freestanding 3D graphite foam prepared by compressed growth template for superior electro-photo thermal performance30
Novel N-doped ZnO and O-doped g-C₃N₄ heterojunction: Enhanced photocatalytic degradation and robust electrochemical biosensing of ascorbic acid30
Lithium-ion storage in honeycomb-structured biomass-derived porous carbon30
Preparation and characterization of ball milled titanium oxide/multi walled carbon nanotube nanocomposite for supercapacitor applications30
Retraction notice to “Iron-iridium metal organic framework/nitrogen doped MXene/graphene quantum dots: A leading composite for electrolytic energy storage and hydrogen evolution reaction” [Diamond Rel30
Fermi level regulation of single-walled carbon nanotubes by metal chloride doping for enhanced NO2 sensing performance30
N-doped hierarchically porous carbon from lignite-derived residue for high-performance supercapacitor30
Study on the performance and mechanism of photocatalytic hydrogen production by NiO/ZnO-graphene composite materials under low irradiation conditions30
Electrochemical performance of MnMoO4-decorated MWCNT nanocomposite plates for asymmetric capacitor applications30
A study of the friction and thermal properties of epoxy composites synergistically reinforced by open-celled Cu foams and carboxylated CNTs30
Production and characterization of biochar and modified biochars by carbonization process of bearberry (Arctostaphylos uva-ursi. L.): Adsorption capacities and kinetic studies of Pb2+, Cd2+ and rhodam30
The preparation of Fe, N Co-doped ZIF-derived carbon nanosheet catalysts for oxygen reduction electrocatalyst in zinc-air batteries30
Bio-derived graphitic carbon microspheres: A green approach for high-frequency microwave absorption29
Twins separated at birth: Identifying pairs of polished diamonds with irradiation-related color from the same rough by fingerprinting using imaging and spectroscopy29
Evolution of mechanical and thermal properties of diamond under external stress29
Design of an electro-optical tunable race-track diamond microring resonator on lithium niobate29
Analyzing the behavior of graphene oxide on high-strength rubberized concrete properties using different optimization techniques29
Synthesis mechanism and ‘orthodoxy’ test based field emission analysis of hybrid and pristine graphene nanowalls deposited on thin Kovar wires29
Synthesis of W/Fe co-doped g-C3N4 decorated with Au nanoparticles for photocatalytic performance29
Sulfur and nitrogen co-doped rGO sheets as efficient electrocatalyst for oxygen reduction reaction in alkaline medium29
Modulation of impedance matching of hollow cubic carbon with semi-closed structure for effective microwave absorption29
Determination of doxorubicin by reduced graphene oxide/gold/polypyrrole modified glassy carbon electrode: A new preparation strategy29
Electrocatalytic activity of benzothiazole substituted cobalt phthalocyanine in the presence of detonation nanodiamonds29
Sustainable development through restoration of Prosopis juliflora species into activated carbon as electrode material for supercapacitors29
Microstructure, mechanical, and wettability properties of Al-doped diamond-like films deposited using a hybrid deposition technique: Bias voltage effects28
Rice straw-derived activated carbon/nickel cobalt sulfide composite for high performance asymmetric supercapacitor28
Synthesis of nickel coated graphene and analysis of the efficacy of its reinforcement on the hyper eutectic AlSi alloys that are grain modified and refined28
Nickel-Fe3O4@Graphene coated lightweight carbonized wood for efficient electromagnetic interference shielding28
Corrigendum to “Potentiality graphene oxides-functionalized magnetic nanomaterials for RNA extraction from rabies and SARS-CoV-2 viruses” [Diam. Relat. Mater. 148 (2024) 111509]28
Effects of high-velocity oxygen fuel metal-ceramic interlayer on the mechanical and tribological properties of Si/DLC-coated Ti-6Al-4V alloy28
Low-temperature compositing of graphene to nanodiamonds by thermal reduction of graphene oxide and photocatalytic properties28
Switchable visible and near-infrared light bifocal lens based on hybrid graphene-metasurface structures28
Synergetic effect of multiwalled carbon nanotubes on mechanical and deformation properties of engineered cementitious composites: RSM modelling and optimization28
The influence of low nitrogen doping on bacterial adhesion of sputtered a-C:H coatings28
Study on the adsorption and photodegradation of ciprofloxacin using mesoporous Nd2O3/maleic hydrazide doped gC3N4 nanocomposite28
Structural characterization and electrochemical performance of laser-induced graphene: Insights into electron transfer kinetics and 4-aminophenol sensing27
Influence of in-situ and post-modification syntheses on the characteristic properties of tyrosine functionalized graphene quantum dots27
Chemically synthesized graphene oxide nanosheet (GONs) is an efficient electrode material for supercapacitor: Effects of current collectors27
Editorial Board27
Preparation of nitrogen-doped porous carbon derived from the used down and its application in supercapacitors with high energy storage properties27
Multifunctional NiTiO3-decorated-rGO nanostructure for energy storage, electro- and photocatalytic applications26
Enhanced holding ability between resin and silanization modified diamonds through sintering Si N bond formation at low temperature26
Electrochemical CO2 reduction properties of boron-doped diamond powder26
Enhanced terahertz third-harmonic generation based on the graphene-assisted meta-grating structure26
Improvement in the universality of high-performance CVD diamond coatings on different WC-Co substrates by introducing multilayered diamond/β-SiC composite26
Phosphorus and nitrogen codoped entangled carbon nanotubes forming spongy materials: Synthesis and characterization26
In situ Raman analysis of reduced-graphene oxide-based electroactive nanofluids26
Microwave irradiation spectrum of graphene oxide paper regulated by Na ions26
O3-assisted low-temperature preparation of marginal S and graphitic N co-doped graphene oxide as high-performance electrocatalyst for bisphenol A degradation26
Editorial Board26
Effect of Xe plasma processing on characteristics of carbon nanotube-based field emission cathodes26
Understanding the desalination mechanism of a two-dimensional graphene-like membrane using data-driven design26
Effects of deposited particle energy on the structure and properties of diamond-like carbon films25
Effect of thermobaric treatment on magnetic and superconductive properties of HPHT-grown nitrogen-doped diamond crystals25
Hydrodynamic thermal transport in BNC225
Synthesis of ZSM-5/FexOy@C/Ni microspheres for enhanced electromagnetic wave absorption25
Electrochemical properties of porous carbon prepared from dense medium component of coal by using alumina as template25
Facile synthesis of Zn0.5Ni0.5Fe2O4/carbon nanocomposite for hyperthermia and drug delivery applications25
Toughening and strengthening of Cu-coated carbon nanotubes reinforced AZ61 magnesium matrix nanocomposites by improving interfacial bonding25
PO-C32: A two-dimensional graphene-based membrane for efficient seawater desalination25
Dual-band, high sensitivity, angle-insensitive graphene—Perfect absorber based on surface plasmon resonance25
Effect of the reinforcement phase on the electrical and mechanical properties of Cu–SWCNTs nanocomposites25
High frequency amplification of acoustic phonons in fluorine-doped single-walled carbon nanotubes25
Exploring diamond multigate FET for next generation three-phase CCD25
Geometries of defects in nanodiamonds optimized with the low-cost methods: How good are they for the electronic g-tensor calculations?25
Hybrid graphene-based materials and its catalytic activity toward hydrogen sorption25
Allowable stretching bond force constants on carbon nanomaterials: A DFT study25
One-pot temperature-controlled hydrothermal synthesis of α-MnO2 nanoparticles decorated thermally reduced graphene oxide composite as high-performance flexible aqueous symmetric supercapacitors25
White electroluminescence of diamond/ZnSe composite film25
Editorial Board25
Tunable viscoelasticity of bulk fullerene network via high-temperature annealing25
Outside Front Cover - Journal name, Cover image, Volume issue details, ISSN, Cover Date, Elsevier Logo and Society Logo if required25
Graphite-doped flexible conductive hydrogel temperature-strain sensor25
Editorial Board25
Editorial Board24
Fabrication of rGO-modified ternary metal chalcogenide hybrid nanocomposite(rGO/Cu2MnSnS4) for high-performance supercapacitors24
Self-glowing single crystal diamond activated with carbon-14: First synthesis and characterization24
Correlated Kelvin-probe force microscopy, micro-FTIR and micro-Raman analysis of doping anisotropy in multisectorial boron-doped HPHT diamonds24
Electrochemical properties of CNT doped nanoporous tin oxide hybrid electrode formed on cold spray tin coating for supercapacitor application24
Preparation and performance of g-C3N4/g-C3N5 homojunction photocatalyst activated peroxymonosulfate for ceftriaxone sodium degradation24
Peculiar nonlinear optical absorption and optical limiting behaviors of bismuth-based binary and ternary nanostructures24
Scalable and atom economic preparation of red-near-infrared emitted N-doped graphene quantum dots with a high quantum yield24
An in-situ process for the growth of carbon nanotubes on the graphene flakes for enhancing the electron field emission properties24
Multi-channel rod structure hard carbon for high initial Coulombic efficiency and low-potential sodium storage24
Compressive fracture analysis of U-notched specimens made of porous graphite reinforced by aluminum particles24
Spectroscopic analysis of pulsed-mode plasma with argon addition for diamond growth23
Green and solid state reduction of GO monolayers sandwiched between Arachidic acid LB layers23
High charge collection efficiency detector based on plasma purified high-quality diamond23
Porous ball-in-ball N-doped carbon loading Co nanoparticles for high-performance asymmetric capacitor23
Effect of nanodiamond concentration on the electrochemical behavior of plasma sprayed titanium-nanodiamond nanocomposite coatings23
Microwave initiated synthesis of carbon nanosphere from plastic and its application as anode electrocatalyst support in direct methanol fuel cell23
Effect of Seebeck coefficient distribution across pn-junction in carbon nanotube films for photothermoelectric power generation by localized sunlight irradiation23
ZnO with abundant Zn vacancies assisted by reduced graphene oxides for high-performance lithium‑sulfur batteries23
LSCF perovskite oxide in situ grown on reduced graphene oxide as high-performance bifunctional catalyst for zinc-air battery23
Effects of CrC interlayer on tribocorrosion properties of DLC-coated TC4 alloy in a 0.9 wt% NaCl solution23
Achieving ultrahigh hole mobility in hydrogen-terminated diamond via boron nitride modifications23
Characterization and properties of porous red mud–based geopolymer composites reinforced with carbon fiber powders23
Metal-induced growth of graphene/a-C: H composite films and tribological properties23
Direct CVD graphene growth onto surgical stainless steel for orthopedic implants23
A self-healing MoS2/GO hybrid polyurethane-based coating with superior anticorrosion performance for Q235 steel23
High growth rate synthesis of diamond film containing perfectly aligned nitrogen-vacancy centers by high-power density plasma CVD23
Reinforcing potential of MWCNTs on mechanical and machining performance of hot-pressed ZTA-MgO ceramic cutting inserts22
Glucose biosensing based on glucose oxidase immobilization on carboxymethyl chitosan/polyaniline/multi-walled carbon nanotubes nanocomposite22
High ensemble concentration of photo-stable NV centers in Type Ib nanodiamonds by thermal assisted migration of native vacancies22
Thermal stability of the magnetic moment in amorphous carbon thin film - An experimental and ab-initio study22
Computational and structural study of titanium/carbon nanotube nanocomposite22
Photocatalytic activity of composite material-based nylon 6/sulfur NPs and reinforced carbon nanotubes22
Non-volatile tuning of normally-on and off states of deep depletion ZrO2/O-terminated high voltage diamond MOSFET22
Effect of synthesis pressure on the properties of PcBN composites22
Sensing functions of oxidized forms of carbon, silicon, and silicon-carbon nanocages towards the amantadine drug: DFT assessments22
Spatial distribution of thermally induced residual stresses in HF-CVD diamond coatings on microstructured steel surfaces22
Dynamic near-field display based on a Friedrich–Wintgen bound state in the continuum22
Non-damaged preparation and energy band structure modulation of silicon-based nitrogen-terminated diamond films22
Probing the tribological behaviors of diamond-like carbon film in water-based drilling fluid environment by varying normal loads22
Effect of surface-active substances on the macrodispersion behavior of thermal stress-modified multi-wall carbon nanotubes in cryogenic environments22
Hydrothermal preparation of N and O-rich porous carbon microspheres and their capacitance properties22
Liquid phase regrowth of 〈110〉 nanodiamond film by UV laser annealing of PTFE to generate dense CVD microdiamond film22
The synergetic effect of cobalt-doped zinc ferrite and hexagonal boron nitride photocatalyst for wastewater treatment22
3D printer fabrication of boron doped Cu-MWCNT/PLA electrodes: Investigation of its efficiency in electrocatalytic hydrogen production22
Interface bonding characteristics and thermal damage behavior of brazed diamond with Nb-added Ni Cr filler alloys22
A novel PCM/expanded graphite composite sphere with high thermal conductivity and excellent shape stability used for a packed-bed thermal energy system22
Formation of SiV centers by doping in bottom-up grown HPHT nanodiamonds and its implication for optical nanosensig21
The quality of epitaxial lateral overgrown diamond on substrate with laser-cut holes of varying shapes and side orientations21
Silver-loaded carbon sphere-in-rod 3D nano-architectures as electrode material for supercapacitors21
Characterization and modeling of the active surface area on TiO2-RuO2 anode modified by graphene oxide/reduced graphene oxide in the chlor-alkali process by RSM21
Phase-field modeling of facet growth of diamond using a modified anisotropic coefficient of interfacial energy21
Brazing of diamond to invar with Ag-Cu-Ti filler alloy: Wettability, microstructure and mechanical performance21
Solid-state synthesis and characterization of two-dimensional hexagonal BCN nanosheet using a free template method21
Pulsed laser modification of layered B-C and mixed BC films on sapphire substrate21
A study on the photophysical properties of strong green-fluorescent N-doped carbon dots and application for pH sensing21
Sunlight responsive superhydrophilic rGO-TiO2 nanocomposite coatings for photovoltaic applications21
Tailored synthesis of a palladium catalyst supported on nitrogen-doped carbon nanotubes for gas-phase formic acid decomposition: A strong influence of a way of nitrogen doping21
Smooth diamond-like carbon films prepared by cathodic vacuum arc deposition with large glancing angles21
A high–performance non–enzymatic glucose sensor based Au and ZrO2 nanoparticles supported on multi-walled carbon nanotubes21
Polyaniline-derived amorphous carbon conformally coated multilayer graphene platelets as anode for lithium-ion batteries21
Investigation of improved Bifunctional electrocatalytic HER and OER performances of Lanthanum Molybdate supported Graphene oxide composite in Acidic and Alkaline media21
Comparative research on the interfacial properties of Ni/diamond and Ni/graphene interface with Cr, B, and Si additions by first-principles calculation21
Molecular dynamics simulation of deposition of amorphous carbon films on sapphire surfaces21
Enhanced protein immobilization efficacy by nanostructuring of ultrananocrystalline diamond surface21
0.15004396438599