Journal of Sol-Gel Science and Technology

Papers
(The TQCC of Journal of Sol-Gel Science and Technology is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-05-01 to 2024-05-01.)
ArticleCitations
Design and analysis of a single elliptical channel photonic crystal fiber sensor for potential malaria detection87
Magnetic materials for photocatalytic applications—a review62
Sol–Gel synthesis of Co3O4 nanoparticles as an electrode material for supercapacitor applications54
Synthesis and characterization of SrFeO3-δ nanoparticles as antimicrobial agent54
RETRACTED ARTICLE: Nanofluids: properties and applications53
Engineered surface properties of MAPI using different antisolvents for hole transport layer-free perovskite solar cell (HTL-free PSC)42
Hierarchically porous monoliths prepared via sol–gel process accompanied by spinodal decomposition41
Photocatalytic TiO2 thin films and coatings prepared by sol–gel processing: a brief review37
Sol–gel synthesized Mg–Ag–Mn nanoferrites for Power Applications32
High-efficiency TiO2/ZnO nanocomposites photocatalysts by sol–gel and hydrothermal methods32
Facile fabrication and characterization of high-performance Borax-PVA hydrogel30
A study of magnetic properties of Y–Ni–Mn substituted Co2Z-type nanohexaferrites via vibrating sample magnetometry28
A review on improving the efficiency of photocatalytic water decontamination using ZnO nanorods28
Synthesis of copper-silver doped hydroxyapatite via ultrasonic coupled sol-gel techniques: structural and antibacterial studies27
Investigation of thermal insulation performance of glass/carbon fiber-reinforced silica aerogel composites27
Hierarchically porous ZIF-8 for tetracycline hydrochloride elimination26
Self-cleaning material based on superhydrophobic coatings through an environmentally friendly sol–gel method26
Improvement of ZrB2 nanopowder synthesis by sol-gel method via zirconium alkoxide/boric acid precursors26
The combined method to synthesis silica nanoparticle by Stöber process25
Multifunctional Aerogels: A comprehensive review on types, synthesis and applications of aerogels23
Photocatalytic activity of Fe and Cu co-doped TiO2 nanoparticles under visible light23
Photocatalytic degradation of methylene blue dye using ZnWO4 catalyst prepared by a simple co-precipitation technique22
The possibility of vanadium substitution on Co lattice sites in CoFe2O4 synthesized by sol–gel autocombustion method21
Fabrication of superhydrophobic PET filter material with fluorinated SiO2 nanoparticles via simple sol–gel process20
Characterization of NMR, IR, and Raman spectra for siloxanes and silsesquioxanes: a mini review20
Super-hydrophobic coatings on cotton fabrics using sol–gel technique by spray20
Effects of NaOH amount on condensation mechanism to form aluminosilicate, case study of geopolymer gel synthesized via sol–gel method20
Flame retarded rigid polyurethane foam composites based on gel-silica microencapsulated ammonium polyphosphate19
Synthesis and characterization of nanoparticulate niobium- and zinc-doped bioglass-ceramic/chitosan hybrids for dental applications19
Ag-PMA supported on MCM-41: Surface Acidity and Catalytic Activity19
Colloidal stability and degradability of silica nanoparticles in biological fluids: a review19
Impact of Co2+ on the spectral, optoelectrical, and dielectric properties of Mg0.25Ni0.25Cu0.5−xCoxFe1.97La0.03O4 ferrites prepared via sol–gel auto-combustion route19
Metal oxide aerogels for high-temperature applications18
The role of TiO2 nanoparticles in enhancing the structural, optical, and electrical properties of PVA/PVP/CMC ternary polymer blend: nanocomposites for capacitive energy storage17
Synthesis and characterization of Mn:CdS nanoflower thin films prepared by hydrothermal method for photocatalytic activity17
Synthesis, characterization, photocatalytic, and antimicrobial activity of ZrO2 nanoparticles and Ag@ZrO2 nanocomposite prepared by the advanced oxidative process/hydrothermal route17
Synthesis of magnetically separable Bi2O2CO3/carbon nanotube/ZnFe2O4 as Z-scheme heterojunction with enhanced photocatalytic activity for water purification17
Preparation of copper ferrite by sol–gel method and the synergistic catalytic for the thermal decomposition of ammonium perchlorate16
Influence of Ti doping on the microstructural and electrochromic properties of dip-coated nanocrystalline V2O5 thin films16
Electrochemical performance of transition metal doped Co3O4 as electrode material for supercapacitor applications16
Photocatalytic degradation of methylene blue by flowerlike rutile-phase TiO2 film grown via hydrothermal method16
Influence of cationic doping at different sites in NaNbO3 on the photocatalytic degradation of methylene blue dye16
Optimizing the environmentally friendly silica-cellulose aerogel composite for acoustic insulation material derived from newspaper and geothermal solid waste using a central composite design15
Glycerol etherification towards selective diglycerol over mixed oxides derived from hydrotalcites: effect of Ni loading15
Preparation and study of lattice structure and magnetic properties of Bi3+ ion-doped Ni–Mg–Co ferrites by sol–gel auto-combustion method15
Effect of temperature and reaction time during solvothermal synthesis of BiOCl on microspheres formation: implications in the photocatalytic oxidation of gallic acid under simulated solar radiation15
Efficient and recyclable photocatalytic degradation of methylene blue dye in aqueous solutions using nanostructured Cd1 − xCoxS films of different doping levels15
Atomic layer deposition of MoO3 on mesoporous γ-Al2O3 prepared by sol–gel method as efficient catalyst for oxidative desulfurization of refractory dibenzothiophene compound15
Preparation of aerogel Mg(OH)2 nanosheets by a combined sol–gel-hydrothermal process and its calcined MgO towards enhanced degradation of paraoxon pollutants15
Effect of the reducing atmospheres on the photoluminescent and phosphorescent properties of Sr4Al14O25:Eu2+, Dy3+, Cr3+ phosphors15
Influence of (Ag–Cu) co-doping on the optical, structural, electrical, and morphological properties of ZnO thin films15
Characteristics and photocatalytic activity of highly c-axis-oriented ZnO thin films15
Insight into the loading, release, and anticancer properties of cellulose/zeolite-A as an enhanced delivery structure for oxaliplatin chemotherapy; characterization and mechanism14
Comparisonal studies of surface modification reaction using various silylating agents for silica aerogel14
Hydrogen production by ethanol steam reforming over Ni-doped LaNixCo1−xO3−δ perovskites prepared by EDTA-citric acid sol–gel method14
Study of structural, optical, and dielectric properties of sol–gel derived ZnFe2O4–Al2O3 composite nanoparticles14
Microwave absorption study of low-density composites of barium hexaferrite and carbon black in X-band13
SiO2/silicone hybrid superhydrophobic coating on gypsum-based materials with self-cleaning and moisture resistance13
Synthesis and characterization of spinel ferrites for microwave devices13
Elucidation of efficient dual performance in photodegradation and antibacterial activity by a promising candidate Ni-doped MoO3 nanostructure13
Structural, electrical, and weak ferromagnetic-to-antiferromagnetic nature of Ni and La co-doped BaTiO3 by sol–gel combustion route13
Double perovskite nanostructured Dy2CoMnO6 an efficient visible-light photocatalysts: synthesis and characterization13
Synthesis of carboxymethyl β-cyclodextrin bonded Fe3O4@SiO2–NH2 core-shell magnetic nanocomposite adsorbent for effective removal of Pb(II) from wastewater13
Preparation of SBA-15 mesoporous silica grafted with bis-salicylaldehyde Schiff base for uptake of Pb(II) and Cu(II) from water13
Thermal stability of gel foams co-stabilized by nano-aluminum hydroxide and surfactants13
Hybrid starch/silica films with improved mechanical properties13
Growth and nitridation of β-Ga2O3 thin films by Sol-Gel spin-coating epitaxy with post-annealing process12
Preparation and characterization of CdS prepared by hydrothermal method12
Formation of supramolecular structure in alginate/chitosan aerogel materials during sol-gel synthesis12
Flame retarded polymer systems based on the sol-gel approach: recent advances and future perspectives12
In vitro bioactivity and osteoblast cell viability studies of hydroxyapatite-incorporated silica aerogel12
Studying the preparation of pure Bi12SiO20 by Pechini method with high photocatalytic performance12
A step forward in the preparation of V–Mg–O catalysts for oxidative dehydrogenation of propane12
Characterization of Zn1-xLaxS thin films; compositional, surface, optical, and photoluminescence properties for possible optoelectronic and photocatalytic applications12
Microfabrication by two-photon lithography, and characterization, of SiO2/TiO2 based hybrid and ceramic microstructures12
Improved properties of Pb(Zr0.52Ti0.48)O3 films by hot plate annealing on LaNiO3 bottom electrode12
Utilization of secondary agricultural products for the preparation of value added silica materials and their important applications: a review12
Sol–gel research in China: a brief history and recent research trends in synthesis of sol–gel derived materials and their applications12
Enhanced corrosion inhibition of low carbon steel in aqueous sodium chloride employing sol–gel-based hybrid silanol coatings12
Modification of MCM-41 type structures by carbon deposition and acid washing for CO2 adsorption12
Facile preparation of flexible polyacrylonitrile/BiOCl/BiOI nanofibers via SILAR method for effective floating photocatalysis12
Modified sol gel synthesis of MoO3 NPs using organic template: synthesis, characterization and electrochemical investigations12
Mn-doped Fe2O3/diatomite granular composite as an efficient Fenton catalyst for rapid degradation of an organic dye in solution12
Primary thermometers based on sol–gel upconverting Er3+/Yb3+ co-doped yttrium tantalates with high upconversion quantum yield and emission color tunability12
High-performance photocatalytic WO3 nanoparticles for treatment of acidic wastewater12
Synthesis of the cobalt ferrite magnetic nanoparticles by sol–gel auto-combustion method in the presence of egg white (albumin)12
Nanospheres type Morphology for regulating the electrochemical property of CeO2 nanostructures for energy storage system12
Birth of the sol–gel method: early history11
Effect of heating rate on structure, morphology and photocatalytic properties of TiO2 particles: thermal kinetic and thermodynamic studies11
Optimization and evaluation of encapsulated brimonidine tartrate-loaded nanoparticles incorporation in situ gel for efficient intraocular pressure reduction11
Spinel ZnCr2O4 nanorods synthesized by facile sol-gel auto combustion method with biomedical properties11
Transparent oxyfluoride glass-ceramics obtained by different sol-gel routes11
Dielectric, impedance, and modulus spectroscopic studies of lanthanum-doped nickel spinel ferrites NiLaxFe2-xO4 nanoparticles11
Effect of lanthanum 4-hydroxy cinnamate on the polymerisation, condensation and thermal stability of hybrid sol–gel formulations11
Radiation synthesis of porous calcium silicate aerogel derived from polyacrylamide hydrogel as thermal insulator11
Rapid synthesis of MCM-41 and SBA-15 by microwave irradiation: promising adsorbents for CO2 adsorption11
Fabrication of methyl acrylate modified silica aerogel for capture of Cu2+ from aqueous solutions10
Conductivity type inversion and optical properties of aluminium doped SnO2 thin films prepared by sol-gel spin coating technique10
Hydrothermal growth and controllable synthesis of flower-shaped TiO2 nanorods on FTO coated glass10
The deep investigation of structural and opto-electrical properties of Yb2O3 thin films and fabrication of Al/Yb2O3/p-Si (MIS) Schottky barrier diode10
β-FeOOH nanorod as a highly active and durable self-repairing anode catalyst for alkaline water electrolysis powered by renewable energy10
Alkaline and rare-earth metals doped transparent conductive tin oxide thin films10
Fabrication and characterization of a novel nanoporous nanoaerogel based on gelatin as a biosorbent for removing heavy metal ions10
Role of surfactant type on morphological, textural, optical, and photocatalytic properties of ZnO nanoparticles obtained by modified sol–gel10
Optical characterization of BMO thin film prepared by an unconventional sol-gel method10
Structural, optical and antimicrobial characteristics of ZnO green nanoparticles10
Properties of Al3+ substituted nickel ferrite (NiAlxFe2-xO4) nanoparticles synthesised using wet sol-gel auto-combustion10
Mechanical properties of ordered mesoporous oxides thin films10
Non-hydrolytic sol–gel as a versatile route for the preparation of hybrid heterogeneous catalysts10
Nanocrystalline SrMnO3 perovskite prepared by sol–gel self-combustion method for sensor applications10
Investigation of the photoanode based on graphene/zinc aluminum mixed metal oxide for dye-sensitized solar cell10
New Mn-TiO2 aerogel catalysts for the low-temperature selective catalytic reduction of NOx10
Synthesis and supercapacitive performances of PPY@MoO3 based nanocomposite material10
Hydrogen peroxide sol–gel coating of microencapsulated phase change materials by metal oxides10
Rapid synthesis of ambient pressure dried tetraethoxysilane based silica aerogels10
Strong synergy of piezoelectric photocatalysis in PFC catalyzed by BaTiO3/Bi2WO6 anode and with peroxymonosulfate to remove rhodamine B10
Polypeptide and copper oxide nanocomposite hydrogel for toxicity elimination of wastewater10
Structural, photocatalytic and surface analysis of Nb/Ag codoped TiO2 mesoporous nanoparticles10
Improvement of the environmental stability of sol-gel silica anti-reflection coatings10
Molecular mechanisms of the metal oxide sol-gel process and their application in approaches to thermodynamically challenging complex oxide materials10
Growth and characterization of transparent vanadium doped zinc oxide thin films by means of a spray pyrolysis process for TCO application10
Nanostructured silica from bagasse ash: the effect of synthesis temperature and pH on its properties10
Liquid-phase synthesis of Li3PS4 solid electrolyte using ethylenediamine9
Structural features and antimicrobial activity of hydrogels obtained by the sol–gel method from silicon, zinc, and boron glycerolates9
Effect of silica/alumina ratio and structure-directing agent on the physical and chemical properties of SAPO-349
The use of sol–gel processes in the development of supported catalysts9
Green synthesis of cow milk-derived carbon quantum dots and application for Fe3+ detection9
Preparation of PVA/starch hydrogel and its in-vitro drug release potential against pus-inducing pathogenic strain and breast cancer cell line9
Multifunctional magnetic mesoporous nanocomposites towards multiple applications in dye and oil adsorption9
Facile synthesis of self-assembling silver spheres and evaluation of their catalytic properties in organic dyes degradation9
Sol–gel synthesized siloxane hybrid materials for display and optoelectronic applications9
Application of CuO and its composite with polyaniline on the photocatalytic degradation of methylene blue and the Cr(VI) photoreduction under visible light9
Medium-scale production of gasochromic windows by sol-gel9
Sol-gel and polyurethane based flame retardant and water repellent coating for Palm/PES nonwovens composite9
Effect of TiO2 nanoparticle loading by sol–gel method on the gas-phase photocatalytic activity of CuxO–TiO2 nanocomposite9
A topical gel nanoformulation of amphotericin B (AmB) for the treatment of cutaneous leishmaniasis (CL)9
Bio-inspired synthesis and characterizations of groundnut shells-mediated Cu/CuO/Cu2O nanoparticles for anticancer, antioxidant, and DNA damage activities9
Mechanisms for texture in BaTiO3 thin films from aqueous chemical solution deposition9
Characterization and application of the spinel CuCr2O4 synthesized by sol–gel method for sunset yellow photodegradation9
Microencapsulated phase change materials composited Al2O3–SiO2 aerogel and the thermal regulation properties9
Facile hydrothermal synthesis of Dy-doped NiMnO3 nanoflakes as a highly stable electrode for energy conversion system9
Green synthesis of CeVO4 nanoparticles using Azadirechta indica leaves extract and their promising applications as an antioxidant and anticancer agent8
Lightweight, strong and thermally insulating polymethylsilsesquioxane- polybenzoxazine aerogels by ambient pressure drying8
Preparation and graft modification of hierarchically porous ferriferrous oxide for heavy metal ions adsorption8
Polyacrylamide gel synthesis, characterization, and optical properties of Co1-xNixCr2O4 spinel nanopigment8
Lanthanide–based luminescent hybrid silica materials prepared by sol-gel methodologies: a review8
The investigation of hydrogenation behavior of furfural over sol–gel prepared Cu/ZrO2 catalysts8
Effect of processing parameters on structural and optical properties of CeO2 nanoparticles for the removal of crystal violet dye8
Fast responsive thermally stable silica microspheres for sensing evaluation: sol–gel approach8
Control on nanostructured quaternary Ti–Al–O–B composite synthesized via electrospinning method, from nanoparticles to nanowhiskers8
Synthesis, characterization, thermal, and antibacterial activity studies on MgO powders8
Novel Kevlar® pulp-reinforced alumina-silica aerogel composites for thermal insulation at high temperature8
Sol-gel coatings for protection and biofunctionalization of stainless-steel prosthetic intracorporeal devices in Latin-America8
Examination on the current conduction mechanisms of Au/n-Si diodes with ZnO–PVP and ZnO/Ag2WO4 –PVP interfacial layers8
Photocatalytic degradation of volatile organic compounds using nanocomposite of P-type and N-type transition metal semiconductors8
Study of structural, morphological, Mössbauer and dielectric properties of NiFeCoO4 prepared by a sol gel method8
Fabrication of heterostructure NiO/ZnO thin film for pseudocapacitor application8
Investigation of energy band gap and its correlation with vacancy defects in Pb1-xNixO nanoparticles synthesized through sol-gel method8
The effect of copper doping on the structural, optical, and electrical properties of nickel oxide thin films for optoelectronic applications8
Phosphotungestic acid supported mesoporous MCM-41 coated NiFe2O4 magnetic nanoparticles as highly effective green nanocatalysts for coumarin and xanthene synthesis8
Green synthesis of amorphous calcium phosphate nanopowders using Aloe Vera plant extract and assessment of their cytotoxicity and antimicrobial activities8
Acid-etched coal fly ash/TiO2 nanocomposites with high photocatalytic degradation efficiency: a high value-added application of coal fly ash8
Recent progress and applications of aerogels in China8
Multifunctional ZnO/CeO2 nanocomposites for Photoinduced dye degradation and Antibacterial activities8
Near-infrared emission carrier, Er3+-doped ZnAl-LDH, for delivery and release of ibuprofen in vitro8
Size dependent mechanistic activity of titanium dioxide nanoparticles for enhanced fibroblast cell proliferation and anti-bacterial activity8
Antifouling and antimicrobial coatings based on sol–gel films8
Effect of hydrothermal temperature on the antibacterial and photocatalytic activity of WO3 decorated with silver nanoparticles8
A green and cost-effective surfactant-assisted synthesis of SAPO-34 using dual microporous templates with improved performance in MTO reaction8
Enhanced ferroelectric properties in La-doped BiFeO3 films by the sol-gel method8
Preparation of mesoporous silica thin films at low temperature: a comparison of mild structure consolidation and template extraction procedures8
Synthesis of novel ZnAl2O4/Al2O3 nanocomposite by sol–gel method and its application as adsorbent8
Synthesis and high photocatalytic performance of a novel hollow meso-TiO2/ZnO composite microsphere7
Mechanical properties and structural integrity of devices based on sol–gel mesoporous oxides thin films7
Hybrid inorganic-organic fluorescent silica nanoparticles—influence of dye binding modes on dye leaching7
Microporous structure control of SiO2-ZrO2 composite membranes via Yttrium doping and an evaluation of thermal stability7
Foam stabilized by the mixture of silicone and hydrocarbon surfactants in the presence of nanoparticles with different specific surface area7
A review of phosphorus(V)-substituted titanium-oxo clusters7
Investigation of lanthanum substitution effects in yttrium aluminium garnet: importance of solid state NMR and EPR methods7
An extensive review on mesoporous silica from inexpensive resources: properties, synthesis, and application toward modern technologies7
Structure engineering of Fe-based MOF aerogel by Halloysite Nanotubes for efficient methylene blue adsorption7
Grain size engineering and growth mechanism in hydrothermal synthesis of Bi0.5Na0.5TiO3 thin films on Nb-doped SrTiO3 substrates7
The ellipsometry versatility in the study of sol-gel films7
High energy storage of La-doped PbZrO3 thin films using LaNiO3/Pt composite electrodes with wide temperature range7
Monosodium glutamate-mediated hierarchical porous formation in LTA zeolite to enhance CO2 adsorption performance7
Fluorine-doped tin oxide as efficient solid acid catalyst: acidity and the catalytic activity relationship7
Investigating the structural and linear/nonlinear optical parameters of PVA/CMC blend loaded by ZnS quantum dots7
Magnetic polyelectrolyte-based composites with dual anticoagulant and thrombolytic properties: towards optimal composition7
Adsorption of hazardous and noxious 4-nitrophenol by a silsesquioxane organic-inorganic hybrid material7
Fabrication of Ce doped CoIn2S4 microspheres as efficient photocatalyst for degradation of rhodamine B7
Preparation and thermal performance of ternary carbonates/silica microcomposites as phase change materials7
Modifying the structure and dielectric characteristics of MnFe2O4/ZnMn2O4 heterostructure nanocomposites via changing the composition7
Structural, dielectric, and magnetic properties of LaCo0.2Mn0.8O3 and La2CoMnO6 perovskite materials7
A comparative study of microstructure, magnetic, and electromagnetic properties of Zn2W hexaferrite prepared by sol–gel and solid-state reaction methods7
Fluoride removal performance of highly porous activated alumina7
The influences of hexadecyl trimethyl ammonium bromide on lanthanum titanate photocatalyst for ofloxacin degradation7
Removal of Pb2+, Cr3+ and Hg2+ ions from aqueous solutions using SiO2 and amino-functionalized SiO2 particles7
Studies of crystallization kinetics and optical properties of ZnO films prepared by sol–gel technique7
Textile waste-reinforced cotton-silica aerogel composites for moisture regulation and thermal/acoustic barrier7
Effect of TiO2 sol on the conversion efficiency of TiO2 based dye-sensitized solar cell7
Silver nanoparticle incorporation into flexible polyamide 12 membranes7
Sol–gel synthesis of iodosodalite precursors and subsequent consolidation with a glass binder made from oxides and sol–gel routes7
V2O3/C composite fabricated by carboxylic acid-assisted sol–gel synthesis as anode material for lithium-ion batteries7
History of ferroelectric materials prepared by sol-gel method7
Structural and electrical properties of sol–gel grown (1 − x) (ZnO) + (x) (SnO2) (x = 0, 0.25, 0.5) nanocomposites7
Direct evidence to control the magnetization in Fe3O4 thin films by N2 ion implantation: a soft X-ray magnetic circular dichroism study7
Effects of solvents and Al doping on structure and physical properties of BiFeO3 thin films7
Adsorption properties of novel layered titanium phosphate prepared from mesoporous titania by sol–gel processing7
In-vitro and in-vivo biological potential of the prepared Feroniella lucida mediated silver nanoparticles7
Formaldehyde detection using Sn doped ZnO thin film7
Study on SBA-15 as an effective sorbent for dye butyl rhodamine B7
Development of mechanical and thermal properties of whey protein–xanthan gum hydrogel by incorporation of basil seed gum nanoparticles, salt, and acidic pH7
Modification of graphene aerogel with titania nanotubes for efficient methylene blue adsorption kinetics7
Comparing the phase transformation of continuous alumina fiber and xerogels derived from the same precursor7
Adsorptive removal of organic pollutants from water by carbon fiber aerogel derived from bacterial cellulose7
Effects of slight Fe (III)-doping on structural and optical properties of TiO2 nanoparticles7
Synthesis of asymmetric dumbbell-like SiO2 nanoparticles in aqueous phase and their emulsification properties7
Understanding the spatial configurations of Sm2O3 in ZnO surface-loaded or embedded for the electrocatalytic oxygen evolution reaction7
Ethanol sensing characteristics of (La,Ba)(Fe,Ti)O3 nanoparticles with impurity phases of BaTiO3 and BaCO37
Exploring the conditions to generate alginate nanogels7
Photocatalytic degradation of organic dyes under visible light on sol-gel derived M/ZnO (M=Cr, Mn, Sn, Fe, Ni, Cu, Co, Ba) catalysts7
Synthesis of Z-scheme g-C3N4/WO3 nano-photocatalyst with superior antibacterial characteristics for wastewater treatment7
Synthesis and characterization of composite SiO2–Al2O3–Fe2O3 core–shell microspheres7
A comparative study of spinel ferrites/PANI composites for high-frequency applications6
Development of homogenous n-TiO2/ZnO bilayer/p-Cu2O heterostructure thin film6
Spectroelectrochemistry in the investigation of sol–gel electrochromic V2O5 films6
Effect of Bi2O3 on the structure and thermal properties of Bi2O3-SiO2-B2O3 glasses prepared by sol-gel method6
Sol–gel processing of polyhedral oligomeric silsesquioxanes: nanohybrid materials incorporating T8 and T10 cages6
Structural and photophysical characterization of highly luminescent organosilicate xerogel doped with Ir(III) complex6
Application of Box–Behnken design to optimize a sol-gel synthesis method for Ag and Zn doped CuO nanoparticles with antibacterial and photocatalytic activity6
Tailoring of optical, hydrophobic, and anti-icing properties of Ca–Mg co-doped ZnO thin films via sol–gel method6
Coating of porous graphitic carbon nitride modified with titanium dioxide (OH-g-C3N4/TiO2) on Ag wire as an SPME fiber for extraction of lead6
Structure and optical properties of nano-ZnMn2O4/CuS solid solution heterostructure6
Effect of pH on phenolphthalein immobilized gold nanoparticles/nanostructures for pH sensing evaluations: sol–gel method6
Recovery of Mn0.8Zn0.2Fe2O4 from Zn–C battery: auto-combustion synthesizes, characterization, and electromagnetic properties6
Reverse microemulsion synthesis of mixed α and β phase NaYF4:Yb,Er nanoparticles: calcination induced phase formation, morphology, and upconversion emission6
A spectroscopic insight of the porous structure of hydrophobic silica aerogels by hyperpolarized 129Xe NMR6
Effects of Ni doping on the structural, photoelectric, and antibacterial properties of ZnCo2O4 thin films6
PDMS-urethanesil hybrid multifunctional materials: combining CO2 use and sol–gel processing6
Fabrication and characterization of CuO/CdS heterostructure for optoelectronic applications6
Thermo-responsive Chitosan/β-glycerophosphate hydrogels directly post-loading anti-inflammatory diclofenac sodium6
Role of starch in the ceramic powder synthesis: a review6
Supercritical CO2 drying of pure silica aerogels: effect of drying time on textural properties of nanoporous silica aerogels6
Adsorption properties and synthesis of silica aerogel-hollow silica microsphere hybrid (sandwich) structure6
Development of α-Fe2O3/TiO2 3D hierarchical nanostructured photocatalysts through electrochemical anodization and sol–gel methods6
Direct synthesis of c-axis-oriented HZSM-5 zeolites in polyacrylamide hydrogel6
Effect of sintering temperature and soaking time on the magnetic properties and transmission behavior of nano crystalline Mg0.8Mn0.2Al0.1Fe1.9O46
Sintering temperature effect on the magnetic interactions in Pr0.67Sr0.33MnO3 manganite6
Outstanding electrochemical behavior of reduced graphene oxide wrapped chromium sulfide nanoplates directly grown on nickel foam for supercapacitor applications6
Synthesis and characterization of hydrophobic glass-ceramic thin film derived from colloidal silica, zirconium(IV) propoxide and methyltrimethoxysilane via sol–gel method6
0.045717000961304