Materials and Corrosion-Werkstoffe und Korrosion

Papers
(The TQCC of Materials and Corrosion-Werkstoffe und Korrosion is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Cover Picture: Materials and Corrosion. 6/2024139
Simultaneous measurement of time‐of‐wetness and electrolyte concentrations with IDE sensors by evaluation of impedance spectra using an artificial neural network24
Effect of Cu on microstructure and corrosion behavior in 360°C lithiated aqueous solution of Zr–Cu alloys21
A study on corrosion mechanism of 15CrMo in saline (Na2SO4) steam at high temperature20
EVENTS19
Assessing the influence of calcium on X65 carbon steel pitting using an artificial pit19
An investigation on the mechanisms of ant nest corrosion of copper tube in formic acid environment18
Contents: Materials and Corrosion. 7/202317
Calendar of Events15
Mechanism of surface corrosion resistance of 304 stainless steel processed by nanosecond laser pulses15
Influence of vanadium addition on corrosion behavior of high‐energy ball milled aluminum alloy 202415
Stress corrosion behavior of scratched Alloy 690TT steam generator tube in chlorine‐containing high‐temperature pressurized water13
Effect of Thyme extract as an ecofriendly inhibitor for corrosion of mild steel in acidic media12
Edge delamination width prediction of 3D body‐in‐white part by finite element‐based corrosion simulation and neural networks12
Microstructure and corrosion resistance characteristics of Ti–AlN composite produced by selective laser melting12
Study on the Influence Law and Prediction of Anode Ground Bed Design Parameters on Cathodic Protection Potential in Buried Pipeline Areas12
Contents: Materials and Corrosion. 4/202311
Calendar of Events11
Calendar of Events11
Contents: Materials and Corrosion. 8/202311
The superhydrophobic coating with low‐temperature dew point corrosion resistance on an acid‐resistant steel substrate prepared by the electrodeposition method11
Calendar of Events11
Cover Picture: Materials and Corrosion. 9/202310
Corrosion behavior of tin‐phosphor bronze strips in environments containing Cl and HCO310
The corrosion of carbon steel under delaminating repair coatings after long‐term marine splash zone exposure10
Some aspects of pitting corrosion susceptibility of As‐welded and thermally aged nitrogen‐alloyed 316SS weld metal10
Effect of structure, phase, and elemental composition of AlN, CrAlN, and ZrAlN coatings on their electrochemical behavior in 3% NaCl solution10
Investigation of the corrosion behavior of 6082 aluminum alloy in deicing salt10
Cover Picture: Materials and Corrosion. 1/202310
Long‐term cathodic disbondment tests in three‐layer polyethylene coatings10
Cathodic control using cellular automata approach10
Effect of CO on the corrosion behavior of 304 stainless steel in wet CO2 gas at 710°C10
High temperature corrosion performance of Inconel 625 hard overlays deposited on stainless steel substrate10
Long‐term atmospheric corrosion of Cr‐free painted aluminum alloys during outdoor worldwide exposures10
The effect of various RRA treatments on the strength and corrosion behavior of a new type of Al–Zn–Mg–Er–Zr alloy10
Tannins as interphase corrosion inhibitors for aluminum in near‐neutral chloride solutions9
Application of electrochemical methods for studying steel corrosion in alkali‐activated materials9
Effects of compressive damage on the corrosion protection performance of offshore wind power coating systems9
Molecular dynamics study of corrosion behavior of iron with vacancies exposed to lead‐bismuth eutectic9
Evaluation of pH variation in cathodic protection conditions by FEM simulation9
Influence of Iron Oxide Deposits on the Hot Corrosion Resistance of YSZ Thermal Barrier Coatings in Molten Vanadium Pentoxide9
Events9
Study on the Hot Corrosion Behavior of Nitrogen‐Containing Nickel‐Based Cladding Layer in Na2SO4 + NaCl Mixed Salt at 700°C9
Isothermal short‐term oxidation behavior of MAR‐M246 nickel‐based superalloy at 800°C and 1000°C9
9
Cover Picture: Materials and Corrosion. 7/20239
Cover Picture: Materials and Corrosion. 11/20219
Cover Picture: Materials and Corrosion. 8/20228
Evaluating the performance of corn peptone in preventing the corrosion of mild steel immersed in HCl8
On the role of grain size variation on pitting corrosion and passive film behavior of Alloy 600H8
Transient and gradient analyses of depolarization criteria. Valuable tools in chloride‐induced rebar corrosion monitoring8
Contents: Materials and Corrosion. 1/20238
A novel approach to the protection of internal passageways of gas turbine blades by aluminide coating: Evaluation of oxidation behavior8
DFT‐Based Insight Into Rare‐Earth Aluminum Oxides R3Al5O12 (R = Ce and Sm) as Promising Thermal Barrier Coating8
Potential influence of microorganisms on the corrosion of the carbon steel in the French high‐level long‐lived nuclear waste disposal context at 50°C8
Estimating galvanic corrosion rate of copper/steel couple by using remote earth mixed potential8
Cover Picture: Materials and Corrosion. 2/20258
Corrosion and degradation behavior of bent aluminum and copper pipes for practical use in air conditioning8
Influence of cyanate ester modifier on the thermal, mechanical, and corrosive properties of epoxy composite coating7
PREFACE: Special Issue: “Offshore Wind” Corrosion and Corrosion Protection of Offshore Wind Power Structures7
The Corrosion Resistance Study of Ni‐P‐CS Coating Improved by Carbon Nanoparticle7
pH‐Dependent Pitting Corrosion in Nickel Thin Films7
Micro‐galvanic corrosion of duplex stainless steel annealed at different temperatures evaluated by experiments and a numerical simulation model7
Cover Picture: Materials and Corrosion. 7/20247
The effects of chloride and sulphate on the growth of sulphide films on copper in anoxic sulphide solutions7
Hollow wire corrosion of stainless steel ropes in a marine mooring system and its relation to microstructure7
Cover Picture: Materials and Corrosion. 5/20257
Long‐term atmospheric corrosion rates of Zn55Al‐coated steel7
Evaluation of coated steels in supercritical CO27
Applying state‐of‐the‐art microscopy techniques to understand the degradation of copper for nuclear waste canisters7
Corrosion Behavior of AZ31B Magnesium Alloy in High‐Temperature Deionized Water7
Corrosion challenges towards a sustainable society7
Developing a self‐healing anticorrosion coating for steel protection in marine tidal zone7
Effect of ZnAl‐LDH on corrosion resistance of Zn–55Al alloy in NaCl solution7
Calendar of Events7
Human Blood Investigation of Ta‐Coated 316L Stainless Steel to Evaluate Corrosion and Wear Behaviour Against Other Artificial Fluids for Orthopaedic Implants7
Role of Fe oxide in the underdeposit corrosion of pipeline steel in oilfield produced water containing SRB7
Effect of Surface Mechanical Rolling Treatment on the Corrosion Behavior of 316L Stainless Steel7
6
Anticorrosive performance and corrosion mechanisms of Zn–Mn‐coated steel6
Influence of surface treatment on the metal dusting behavior of alloy 699 XA6
Quantifying intergranular corrosion susceptibility in AA2098‐T351 weldments through friction stir welding6
Contents: Materials and Corrosion. 11/20246
Experimental and Simulation Research on the Corrosion Behavior of Al2O3‐SiO2‐CaO Based Refractory in a Fluidized Bed Incinerator for High‐Fluorine Hazardous Waste6
Masthead: Materials and Corrosion. 10/20246
Cover Picture: Materials and Corrosion. 11‐12/20236
Consequences of the additional presence of MC carbides on the behavior in oxidation at 1000°C of a cast Cantor high entropy alloy6
Comparative study between natural and artificial weathering of acrylic‐coated steel, aluminum, and galvanized steel6
The effect of different surface treatments of 310S austenitic stainless steel on the corrosion behavior in supercritical water using slow positron methods6
Corrosion behavior of riveted joints with electrophoretic treatment in neutral salt spray environment6
Formation and corrosion resistance of a novel Co–Ti–Mo composite chromium‐free chemical conversion coating on LY12 aluminum alloy6
Calendar of Events6
Oxidation behavior of lightweight Al2NbTi3V2Zr high entropy alloy at 1000°C6
Corrosion of some metallic materials embedded in gypsum6
An assessment of pitting corrosion in anodized aluminum alloys: It might not be what it seems6
Accelerated microbiologically influenced corrosion of copper by sulfate‐reducing bacterium Desulfovibrio desulfovibrio6
Masthead: Materials and Corrosion. 08/20215
Corrosion mechanisms of Al‐alloyed hot‐dipped zinc coatings in wet supercritical carbon dioxide5
Corrosion properties of Ti3SiC2 and Ti3AlC2 in static liquid lead–bismuth eutectic at 500°C5
Long‐term low‐temperature hot corrosion of PTA welded René 41 superalloy under marine‐like conditions5
What happens when a Pb–Sn coating deposited on low carbon steel is exposed in an HCl‐polluted wet environment? Development of a corrosion mechanism5
Pitting corrosion behavior and mechanism of 5083 aluminum alloy based on dry‐wet cycle exposure5
Development of potentiostatically deposited cerium conversion coating for Mg alloys5
Influence of Intermetallic Particles on Localized Corrosion of Tin Alloy Organ Pipes5
The effects of Si‐ion implantation and preoxidation on the corrosion behavior of a new steel SIMP in 550∘C ${\bf{55}}{{\bf{0}}}^{\circ }{\bf{C}}$ lead‐bismuth eutectic5
The effect of partial recrystallization on the corrosion resistance of EN AW6082 forged components evaluated with different tests5
Electrochemical corrosion behavior of Ti‐3Mo alloy under different accelerated corrosion tests5
Nano‐silica/chitosan composite coatings on biodegradable magnesium alloys for enhanced corrosion resistance in simulated body fluid5
Contents: Materials and Corrosion. 12/20245
A rapid corrosion screening technique for grade 2707 hyper‐duplex stainless steel at ambient temperature5
Effects of surface nanocrystallization on the oxide film formed on 316LN stainless steel in a high‐temperature aqueous environment5
5
5
Roles of Nb on the oxidation characteristics and oxide scale evolution of Fe‐25Cr‐35Ni‐2.5Al‐XNb alloys at 1000°C and 1100°C5
High‐temperature corrosion behavior of Inconel 617 with Ni‐claddings in molten FLiNaK salt5
Modeling of the corrosion behavior of B30 alloy in a deep‐sea environment by using the response surface methodology5
Calendar of Events5
Dislocation cell walls with high dislocation density as effective hydrogen traps in Armco iron5
Technical note on the determination of degradation rates of biodegradable magnesium implants5
Analysis of the Ce(III) chloride, Ce(III) nitrate, and Ce(III) propionate as corrosion inhibitor of the aluminum alloys in NaCl solution5
Influence of Ti and TC4 Particles on the Corrosion Behavior of AZ91D Magnesium Matrix Composites5
Study of Manganese and Phosphoric Acid on Dimensionally Stable Anodes During Zinc Electrowinning5
A study on optimization of anode groundbeds for cathodic protection of deep well casings based on the boundary element method5
EFC Newsletter5
DL‐EPR and AFM study of sensitization of a 17%Cr multiphase stainless steel5
Corrosion performance of different alloys exposed to HTL conditions—A screening study5
Calendar of Events4
Study on the Effect of Dry and Wet Cycle Time Ratio on the Corrosion Behavior of 2198 Aluminum–Lithium Alloy4
Tannic acid‐copper metal‐organic frameworks decorated graphene oxide for reinforcement of the corrosion protection of waterborne epoxy coatings4
Liquid lead–bismuth eutectic embrittlement effect on the tensile properties of T91 steel at 350°C4
Molten Salt Corrosion Studies of Sanicro‐25 by Electrochemical Techniques at High Temperature4
Influence of Surface Preparation on the Durability of Repair Coatings for Prepainted Galvanised Steel4
Patina formation and diffuse dispersion of alloying metals from weathering steels at urban atmospheric conditions—A combined laboratory and field investigation4
Contents: Materials and Corrosion. 10/20234
Masthead: Materials and Corrosion. 1/20244
Corrosion behavior and mechanism of the high‐strength low‐alloy steel joined by multilayer and multipass welding method4
Corrosion and Microstructural Evolution of 15‐15Ti Steel in Liquid LBE at 500°C Under ~10−7 wt% Dissolved Oxygen4
A laboratory study of the failure analysis of copper tube used in the air conditioning heat exchanger4
EMAR monitoring system applied to the thickness reduction of carbon steel in a corrosive environment4
Effect of Temperature and Oxygen Concentration on Corrosion of J55 Steel in an O2/CO2 Environment4
Study of the matching performance of a microarc oxidation film/electrophoresis composite coating on magnesium alloys4
A comparison of methods to assess the resistance of reinforcing steel against chloride‐induced corrosion in concrete—Particular consideration of 12% chromium steel4
The effect of multielectrode galvanic corrosion behavior and area ratio on 6061 aluminum alloy, Q235 stainless steel, and carbon fiber composites4
Enhancement of barrier and corrosion protection performance of epoxy coatings through adding eco‐friendly lamellar biochar4
Morphological characteristics and geometric prediction model of pits in complex corrosion environment4
Corrosion performance of nano‐treated aluminum alloy A206 with TiC nanoparticles4
Influence of surface treatment on metal dusting resistance of welds4
Calendar of Events4
4
Corrosion Behavior of Aluminum in Fossil Diesel Fuel and Biodiesel From Chicken Eggshell‐Alumina‐Catalyzed Waste Cooking Oil4
4
Investigation into creep‐to‐rupture of SIMP steel in stagnant LBE at 300–450°C4
Evaluation of a commercial graphene‐additive for boosting the corrosion performance of a thermal curing primer4
Influence of the machined surface roughness on the pitting behavior of 304 stainless steel4
Impact of nano‐SiCP and nano‐hBNP on the corrosion performance and fatigue behavior of Mg–Zn hybrid nanocomposites4
A Detailed Review of Numerical Modeling of Flow Accelerated Corrosion: Challenges and Opportunities for the Future4
Corrosion performance of powder‐coated aluminum profiles with increased trace element content4
Masthead: Materials and Corrosion. 12/20244
Masthead: Materials and Corrosion. 5/20254
Optimize the Corrosion and Mechanical Performance of Additive‐Manufactured Nano‐Size WC‐Reinforced Stainless Steel Matrix Composites by Heat Treatments4
Masthead: Materials and Corrosion. 9/20244
4
Approach to consider self‐corrosion in corrosion monitoring of reinforced concrete structures exposed to chlorides4
Kurtosis as a Decisive Topographic Parameter for Pitting Attack of AISI 304L Stainless Steel4
High temperature corrosion behavior of alloys in reducing HCl and H2S containing environments: Thermodynamical and experimental assessment4
A comparative study and optimization of corrosion resistance of Mg–Al layered double hydroxides films at different hydrothermal temperatures on LA103Z Mg–Li alloy4
Cover Picture: Materials and Corrosion. 2/20234
The corrosion protection performance of repair coatings for offshore wind power constructions after long‐term splash zone site exposure3
Thermoset thin film primers: Influence of substrate, layer thickness and wettability of additives in laboratory testing3
Enhancing the Flow‐Accelerated Corrosion Resistance of X70 API Steel Through Laser Surface Melting in Synthetic Oilfield Water3
Investigation on mechanical properties and corrosion behavior of dissimilar joints of 5083 and 6005A alloy welded by friction stir welding3
Effect of KCl deposits in high‐temperature corrosion on chromium‐rich steels in SO2‐containing atmosphere3
Preparation and characterisation of black conversion coating of Cr(NO3)3–CoCl2–NiCl2 of Zn–Ni alloy electroplated on 2024 aluminium alloy surface3
3
Masthead: Materials and Corrosion. 2/20223
Failure investigation of an elbow pipe used in sewage water treatment facility3
Effect of KCl on high‐temperature corrosion of low‐alloyed steel under low oxygen partial pressure3
Calendar of Events3
Workability and corrosion behavior studies on sintered iron‐based hybrid powder metallurgy alloys3
Masthead: Materials and Corrosion. 10/20223
Contents: Materials and Corrosion. 3/20253
Corrosion Behavior of Two Kinds of Stainless Steels in a Novel Ternary Nitrate/Nitrite Molten Salt3
An overview of the Canadian nuclear waste corrosion program3
Effects of Ni content on the corrosion behavior of Al0.5CoCrFeNix high entropy alloys in acid and alkaline media3
Cover Picture: Materials and Corrosion. 3/20253
Insight into polymer concentration, temperature, CO2 content, and Cl content on corrosion of N80 steel tubing in polymer flooding3
Second‐harmonic generation technique for in situ study of passive film formation on carbon steel surfaces in aqueous solutions3
Masthead: Materials and Corrosion. 7/20253
Role of copper and zinc additives in the stiction phenomenon of automotive braking systems3
Performance Testing, Corrosion Behavior, and Corrosion Product Analysis of Cast Magnesium and Its Alloys3
Self‐healing polyurethane anticorrosive coatings based on alkyd resin microcapsules3
Thermochemical Corrosion of Furnace Materials in Atmospheres Containing Ammonia3
Calendar of Events3
Microstructure and Corrosion Resistance of Ni‐Cr‐Mo‐Si/Cr3C2 Coatings Prepared by Laser Cladding3
Corrosion behavior of Ni–25Cr–10Fe–3Si–xMo alloys beneath KCl–ZnCl2 deposits at 650°C: Role of long‐term aging3
Calendar of Events3
Properties of Hastelloy joint welded via laser wire‐filling3
3
Cover Picture: Materials and Corrosion. 12/20213
Cyclic oxidation behavior of MCrAlX coatings made by electrolytic codeposition3
Nonlinear dynamics of ascorbic acid‐KI interaction on carbon steel corrosion in acid medium3
Microbially induced corrosion issues in the underground buried crude oil and natural gas bearing pipelines: A review3
Masthead: Materials and Corrosion. 8/20243
Failure cause assessment of steam reformer radiant tube after long‐term service3
AC corrosion of steel pipeline under cathodic protection: A state‐of‐the‐art review3
Corrosion protection investigations of oxide‐silane composite coating on hot dip aluminized steel3
Influence of laser energy density on the microstructure and corrosion resistance of LPBF‐fabricated titanium‐based nanocomposites3
Corrosion inhibition of amino acids for 316L stainless steel and synergistic effect of I ions: Experimental and theoretical studies3
Analysis of the kinetic growth of an electrochemically formed bronze patina using the layer‐pore resistance model3
Ant‐Nest Corrosion in Copper Pipes Triggered by Ethylene Vinyl Acetate‐Based Adhesive3
Galvanostatic testing of coated aluminum alloy 7075‐T6 galvanic assemblies: Effects of coating systems and environmental factors3
Treatment of canister corrosion in Posiva's safety case for the operating licence application3
Contents: Materials and Corrosion. 10/20213
Influence of Al content and low oxygen pressure preoxidation on high‐temperature oxidation resistance of Ni–25Cr–xAl–1Si–0.5Y alloys3
Masthead: Materials and Corrosion. 10/20233
Contents: Materials and Corrosion. 3/20243
3
Cover Picture: Materials and Corrosion. 10/20223
Contents: Materials and Corrosion. 7/20253
0.16688013076782