Superconductor Science & Technology

Article	Citations
Preliminary tests and numerical modeling of the multistage twisted HTS cables with high-current capacity	120
3D simulations of total AC loss in a twisted multifilamentary MgB2 wire carrying AC currents under AC magnetic fields at 20 K	91
Topological insulator based axial superconducting quantum interferometer structures	86
E–I characteristics and critical currents of small Bi-2223/Ag coil thermally stabilized by solid and liquid nitrogen compared to water ice	79
K-doped Ba122 epitaxial thin film on MgO substrate by buffer engineering	72
Crossover from Cooper-pair hopping to single-electron hopping in Pb x (TiO2) 66
A turnkey gaseous helium-cooled superconducting CORC® dc power cable with integrated current leads	60
Low clock skew superconductor adiabatic quantum-flux-parametron logic circuits based on grid-distributed blocks	58
Degradation of superconductors due to impurity scattering: predicting the performance loss in fusion magnets	58
Prediction of strain, inter-layer interaction and critical current in CORC® wires under axial strain by T-A modeling	57
Development and quench-training performance evaluation of the world’s largest aperture superconducting magnet with zero-evaporation for the SWORD	57
Optimization of the superconducting properties of NbTiN thin films by variation of the N2 partial pressure during sputter deposition	53
A new ductile, tougher resin for impregnation of superconducting magnets	46
Persistent MgB2 joints for react and wind magnets	46
Performance test of REBCO CICC sub-cables with l0 kA current under 20 T background field	46
Non-uniform critical current and stacking effect remedy for multi-filament REBCO tapes with potential defects	44
Electrically controlled crossed Andreev reflection in altermagnet/superconductor/altermagnet junctions	39
Multiscale modeling on the multi-physical behaviors of high temperature superconducting magnets based on a combined global homogenization and local refinement scheme	39
Transient stability of superconducting wires under pulsed thermal disturbances	37
AC losses in the STEP TF magnet during plasma initiation	37
Feedback-controlled flux modulation for high-temperature superconducting magnets in persistent current mode	37
Simultaneous transverse loading and axial strain for REBCO cable tests in the SULTAN facility	36
FEM-Circuit co-simulation of superconducting synchronous wind generators connected to a DC network using the homogenized J–A formulation of the Maxwell equations	36
Superconductivity and weak anti-localization in nodal-line semimetal SnTaS2	36
Fabrication of rapidly densified EuBCO targets via spark plasma sintering for enhanced pulsed laser deposition of coated conductors	34

Navigation of superparamagnetic particles with a pre-magnetized high-temperature superconducting bulk in a weak background field	34
Design and modelling tools for DC HTS cables for the future railway network in France	33
Numerical determination of the threshold magnetic field in superconducting strips and coils triggering dynamic resistance	32
Development of the first Tesla class iron-based superconducting coil for high field application	32
Unraveling quench dynamics and real-time continuous detection in HTS tapes through distributed fiber optic sensing	32
Ultra-low magnetization and hysteresis loss in APC Nb 3 Sn superconductors	32
Experiment and numerical simulation of the combined effect of winding, cool-down, and screening current induced stresses in REBCO coils	31
Dynamic resistance and total loss in a three-tape REBCO stack carrying DC currents in perpendicular AC magnetic fields at 77 K	31
Design and test of HTS rotor magnets for high energy density motor	31
Interleaved transposition winding: an innovative approach for inductive balancing in high-temperature superconducting non-twisted stacked cable coils for central solenoids	31
Superconducting undulators: permanent magnets after all	30
Superconducting generators and cables for wind energy—A review	30
Protocols and methodologies for acquiring and analyzing critical-current versus longitudinal-strain data in Bi2Sr2CaCu2O8+x wires	30
Study of vortex dynamics in an a-MoGe thin film using low-frequency two-coil mutual inductance measurements	29
Activation characteristics of metal-to-insulator transition behaviour in vanadium trioxide insulator for REBCO conductor under turn-to-turn transport current	27
Inductance and penetration depth measurements of polycrystalline NbN films for all-NbN single flux quantum circuits	26
Development of a Zappe-interferometer style superconducting switch for time-division multiplexed readout of transition edge sensor array	26
The non-exponential decay characteristics of HTS NI-class coils in sudden discharge experiments	26
Fast current discharging using self-coupling energy absorption for insulated high temperature superconductor magnets	25
High-current-density Rutherford MgB2 cable sheathed by CuNi30 alloy	24
In-situ synchrotron x-ray photoelectron spectroscopy study of medium-temperature baking of niobium for SRF application	24
Stacked-tape trapped-field superconducting magnets—edging ahead?	24
CORC cables: a fast numerical characterization method for critical currents	24
Low-loss superconducting aluminum microwave coplanar waveguide resonators on sapphires for the qubit readouts	24
Miniaturized HTS linear flux pump with a charging capability of 120 A	24
Mechanical behavior of HTS tapes in highly flexible REBCO cable under torsional and tensile loads	24
Design of HTS linear phase bandpass filter based on the inline topology	23
A numerical method to calculate screening current-dependent self and mutual inductances of REBCO coils	23
Smooth, homogeneous, high-purity Nb3Sn superconducting RF resonant cavity by seed-free electrochemical synthesis	23
Effects of successive annealing on high-field electrical transport and the upper critical field in S-substituted FeTe	23
Simulating the behaviour of travelling wave superconducting parametric amplifiers using a commercial circuit simulator	23
Record field in a 10 mm-period bulk high-temperature superconducting undulator	22
Critical current and n-value prediction of second-generation high temperature superconducting conductors considering the temperature-field dependence based on the back propagation neural network with	22
Commissioning and operation of 11.74T human MRI magnet for Gachon university gil medical center, South Korea	22
Screening of magnetic fields by superconducting and hybrid shields with a circular cross-section	22
Gamma radiation effects on high-temperature superconducting ReBCO tape	22
Effect of transverse compressive stress applied at room temperature on Nb3Sn Rutherford cables	21
Ion-assisted sputter-deposition of superconducting NbN thin films on silicon	21
Comparing the performance of 850 GHz integrated bias-tee superconductor-insulator-superconductor (SIS) mixers with single- and parallel-junction tuner	21
Effect of off-axis bending on microstructural and transport properties of coated conductor tape	21
Nanoscale NbN/TaN/NbN Josephson junctions for superconducting memory cells	21
High-current, double-sided REBCO tapes by advanced MOCVD	21
High-temperature superconducting magnet prototype for maglev launch: design, fabrication and validation	20
Effects of high-energy Pb-ion irradiation on critical current and flux pinning in Fe(Se,Te) thin films	20
Properties of Nb x Ti(1−x)N thin films deposited on 300 mm silicon wafers for upscaling superconducting digital circuits	20
Superconductivity in Nb5Ir3N: a nitrogen-filled electride	20
K-band dual-band superconducting bandpass filter using uneven coupled SIRs and stub-loaded combining network	20
Numerical simulation of AC losses in superconducting gravimeter	19
Monolithic integration of superconducting-nanowire single-photon detectors with Josephson junctions for scalable single-photon sensing	19
Fabricating Ba0.5Cs0.5Fe2As2 films on BaFe2As2 substrates and their superconducting properties	19

Study of de Haas van Alphen oscillations on superconducting (Sr,Ba)Pb3 with Kagome lattice	19
Standard measurement method for normal state resistance and critical current of resistively shunted Josephson junctions	18
Superconducting properties of new hexagonal and noncentrosymmetric cubic high entropy alloys	18
Improved RF performance of niobium cavities via in-situ vacuum heat treatment technique	18
Design, Analysis and Test of the Dual Three-Phase Permanent Magnet Vernier Superconducting Armature Electrical Machine Prototype	18
Complex coincidence of superconducting and inverse proximity in quasi 2D nanostructured SnTe	18
Superconductor-ferromagnet hybrids for non-reciprocal electronics and detectors	18
From borohydride to superconductor: efficient and low-cost fabrication of nanostructured MgB2 bulk with high density and excellent performance	17
Superconducting nitridized-aluminum thin films	17
The feasibility of designing a back propagation neural network to predict the levitation force of high-temperature superconducting magnetic levitation	17
Use of interleaved bulks and coated conductors to screen the stray magnetic field of a large superconducting coil from a high-torque rotating machine	17
Winding angle optimization and testing of small-scale, non-planar, high-temperature superconducting stellarator coils	17
Exploration on the application of a new type of superconducting energy storage for regenerative braking in urban rail transit	17
Review on high-temperature superconducting magnet technology for its development in ultra-high-field MRI	17
A novel AC loss measurement method for HTS coils based on parameter identification	17
Numerical simulation on the threshold field and AC loss in vertical stacks of REBCO tapes carrying DC transport currents under perpendicular AC magnetic fields	17
Manufacturing and testing of AMaSED-2: a no-insulation high-temperature superconducting demonstrator coil for the space spectrometer ARCOS	16
Correlation between microstructure and superconducting properties of MgB2 bulk samples with Mg addition and Mg/hBN co-additions	16
Analysis of thermal grooving effects on vortex penetration in vapor-diffused Nb3Sn	16
Effect of cubic and hexagonal boron nitride additions on the microstructure and properties of bulk MgB2 superconductors	16
Local reorganisation of the intermediate mixed state in niobium below the critical depinning current	16
AC loss measurements of parallel-stacked ReBCO coils cooled by a helium gas circulation system	16
Microstructure of superconducting hetero-joints between single-grained Gd–Ba–Cu–O bulk superconductors	16
Design, construction and test of a 13 T no-insulation REBCO magnet: validation of an improved circuit model considering the screening current	16
Impact of disorder on the superconducting properties and BCS–BEC crossover in FeSe single crystals	16
3D general simultaneous multi-scale homogeneous T-A model for electromagnetic simulations of large-scale REBCO coils with complex geometries	16
Thermal effects on the resistive superconducting transition in step-edge YBCO squid arrays	16
Absence of magnetic interactions in Ni–Nb ferromagnet–superconductor bilayers	16
High temperature superconducting closed-loop coils: constructures, key technologies, applications, and future suggestions	16
Fundamental study on performances of fiber-superconducting composite CORC cable: electromagnetic, thermal, mechanical and quench behaviors	15
Resistance at 77 K of two Bi-2223 coils with superconducting joints prepared by incongruent melting	15
Nonlinear dynamics of 3D superconducting maglevs with six degrees of freedom: dependence on magnetization strategy and disturbance type	15
Study of long-term stability of Mo–Cu bilayer films	15
Performance degradation due to thermal cycling in soldered Faraday and SuperPower HTS tape stacks	15
A brief review of the physical properties of charge density wave superconductor LaPt2Si2	15
Saturating quantum efficiency of SNSPDs with disorder manipulation of NbN films	15
Trapped magnetic field distribution above a superconducting linear Halbach array	15
Flux transfer circuits breaking conventional limit in transfer coefficient based on a negative inductance of a π-junction	15
Physics-constrained deep learning framework for accurate AC loss prediction of high-temperature superconductors: impact of data scarcity and extrapolation beyond the range of experimental measurements	15
Optimization of superconducting niobium nitride thin films via high-power impulse magnetron sputtering	14
Review of materials for HTS magnet impregnation	14
A sulfurization method for creating the buffer-layers current flow diverter architecture in REBa2Cu3O7 coated conductors	14
Quench dynamics in bare YBCO thin films with and without artificial pinning centers	14
Dependence of dynamic resistances in high-temperature semiconducting quasi-isotropic strands on magnitude and orientation of AC magnetic field	14
Development of homogeneous and high-performance REBCO bulks with various shapes by the single-direction melt growth (SDMG) method	14
Design and manufacture of an ultra-compact, 1.5 T class, controlled-contact resistance, REBCO, brain imaging MRI magnet	14
Tailoring the critical temperature of Ca/K-1144 superconductors: the effect of aliovalent substitution on tetragonality	14
Tuning critical current density properties of YBa2Cu3O y thin films under longitudinal magnetic field by using heavy-ion	14
Magnetic field–dependent vortex dynamics and critical currents in superconducting microwires with regular large-area perforation by pinholes	14
Enhancement of electro-mechanical behaviors in RE–Ba–Cu–O composite superconducting tapes with laser slit edges	14
A surface-shunting method for the prevention of a fault-mode-induced quench in high-field no-insulation REBCO magnets	14
Applicability of ultrasonic welding to Ag-stabilized REBCO CC joints and evaluation of their electromechanical properties	14
Transport properties of 2H-NbSe2 synthesized by selenization of Nb thin films	14
Kagome materials AV 3 Sb 5 (A = K,Rb,Cs): pairing symmetry and pressure-tuning studies	14
Superconducting ring resonators: modelling, simulation, and experimental characterisation	13
J	13
On the use of intentionally-designed defect distributions in REBCO superconducting cables and magnets	13
Numerical analysis of hysteresis loss in VIPER cables for HTS fusion applications	13
Magnetization texture imprints produced by flux avalanches in ferromagnet/insulator/superconductor heterostructures	13
Investigation of magnetic hysteresis in HTS coil by means of numerical modeling using T–A formulation	13
Electromagnetic properties of iron-based superconducting uninsulated double pancake coils and their comparison with REBCO coils	13
Development and assessment of simplified analytical method for current distribution among REBa2Cu3O y parallel conductors in armature	13
Stable implicit numerical algorithm of time-dependent Ginzburg–Landau theory coupled with thermal effect for vortex behaviors in hybrid superconductor systems	13
Thermal-vibration correlation study for high-temperature superconducting maglev intelligent monitoring based on back propagation neural network analysis	13
Analysing the RF & IF bandwidth performances of ALMA Band-9 superconducting mixers for wideband sensitivity upgrade	13
Noise analysis and optical response of microwave kinetic inductance detectors with an optical stack	12
HTS conductor coil by in-situ winding technology for large-scale high-field magnet	12
Local internal demagnetizing fields as one of the main fundamental reasons for the low density of critical current in twinned YBa2Cu3O7 − x H	12
The unusual distribution of spin-triplet supercurrents in disk-shaped Josephson junctions	12
High temperature superconducting CORC cable with variable winding angles for low AC loss and high current carrying SMES system	12
Experimental and first-principles studies of superconductivity in topological nodal line semimetal SnTaS2	12
Iron-based superconductors have joined the practical high-field magnet family	12
Analysis of critical current fluctuations as a means of checking the quality of high-temperature superconductor tape slitting	12
Violation of magnetic flux conservation by superconducting nanorings	12
Influence of thickness and domain structure on the vortex instability of superconducting/ferromagnetic bilayers	12
An analytical model for predicting the magnetization loss in HTS sector-shaped conductors for fusion	12
Upper critical field and critical current density of Zn and Mn substituted FeSe0.4Te0.6 single crystals	12
Improvement of critical current properties and irreversibility lines by metal substitution in Ca-free Hg-based double-layered cuprates	12
Trapping a magnetic field of 17.89 T in stacked coated conductors by suppression of flux jumps	12
Influence of ferromagnetic slice on the charging performance of a through-wall HTS flux pump employing a magnetic coupler	12

Low power single flux quantum qubit control circuit without high-frequency input	12
Numerical simulation of mechanical behaviors and intergranular fracture of polycrystalline Nb3Sn and superconducting filaments	11
Ac losses in field-cooled type I superconducting cavities	11
Fabrication of microstrips of iron-based superconductor NdFeAs(O,H)	11
Excellent field–trapping properties of large ring–shaped REBCO melt–textured bulks fabricated by the single–direction melt growth (SDMG) method	11
Significantly enhancing current carrying performance of MgB2 superconductor with natural dopants carbon nanoparticles and rare earth elements derived from Dicranopteris pedata waste	11
Investigation of diethanolamine (DEA) as a chelating agent in the fabrication of fluorine-free propionate route YBa2Cu3O7 (YBCO) thin films	11
The research on the influence mechanism of internal deformation for the performance of Bi-2212	11
Improving Nb3Sn cavity performance using centrifugal barrel polishing	11
Pressure tuning of the Se-substituted BiS2-based superconductor LaO0.5F0.5Bi(S	11
Design, fabrication and experimental demonstration of a highly sensitive SQUID-based accelerometer	11
Enhancement of superconductivity by organic flexible substrates in NbSe2 thin flakes	11
Review of Yu–Shiba–Rusinov bound state in quantum impurity structures: basic principle and current progress	11
Comprehensive study on the performance evolution of BaHfO3-added metal–organic decomposition YBCO-coated conductors with different sizes and concentrations	11
Degradation of I c due to residual stress in high-performance Nb3Sn wires submitted to compressive transverse force	11
A non-destructive method for detecting turn-to-turn resistivity distribution in NI REBCO coils	11
The feed line resonator (FLR) method and it’s application to superconducting wideband filter design with extreme sharp skirt	11
Superconducting cable with energy storage function and its potential for next-generation power system compatible with large-scale renewable energy installation	11
Mechanical properties and densification mechanism of powder-in-tube Ba x K1−x Fe2As2	11
2025 Roadmap on Nanoscale Superconductivity for Quantum Technologies	11
Design, construction and performance testing of a 1.5 T cryogen-free low-temperature superconductor whole-body MRI magnet	11
Anisotropic upper critical field, Seebeck and Nernst coefficient of Nb0.20Bi2Se3 superconductor	11
Electromagnetic and mechanical properties of CORC cable due to screening current	11
Mechanical behavior and critical current density variation of the twisted stacked-tape slotted-core cable-in-conduit conductor under bending and axial tensile load	11
Roadmap on artificial intelligence and big data techniques for superconductivity	10
3D numerical investigation on delamination behavior of the epoxy impregnated REBCO pancake coil	10
Comprehensive review on topological superconducting materials and interfaces	10
Magnetisation loss behaviour in insulated and non-insulated HTS REBCO double-pancake and racetrack coils at 77 K	10
Differential geometry method for minimum hard-way bending 3D design of coils with ReBCO tape conductor	10
Thickness effect on the evolution of superconducting properties in FeSe0.4Te0.6 thin films	10
Superconductor bistable vortex memory for data storage and readout	10
Thermal-electrical analogy for simulations of superconducting power cables	10
Prediction models establishment and comparison for guiding force of high-temperature superconducting maglev based on deep learning algorithms	10
Roadmap for the investigation of irradiation effects in HTS for fusion	10
Ginzburg–Landau simulations of three-terminal operation of a superconducting nanowire cryotron	10
Advanced inversion algorithm for current density reconstruction in REBCO tapes using a regularization-enhanced FFT approach	10
A novel numerical approach for analyzing experimental data on critical current degradation in Nb3Sn wires caused by transverse deformations preceding heat treatment	10
Electromagnetic and dynamic characteristics of HTS maglev systems under rotating magnetic fields: experiments and modeling	10
Stabilization of ambient pressure rocksalt crystal structure and high critical field superconductivity in ReC via Mo and W substitution	10
Minimal lateral damage fabrication of high-temperature superconducting nanowires via focused helium ion beam irradiation	10
An optical transition-edge sensor with high energy resolution	10
Laser-lithographically written micron-wide superconducting nanowire single-photon detectors	10
Smart fault detection of HTS coils using artificial intelligence techniques for large-scale superconducting electric transport applications	10
Time-variant magnetic field, voltage, and loss of no-insulation (NI) HTS magnet induced by dynamic resistance generation from external AC fields	10
Uncertainty and worst-case expectation analysis for multiphysics QPR simulations	10
Vortex in superconducting thin-film strips of arbitrary width	10
The geometry, purity, and grain orientation database of the Cu stabilizer layer and the effect on the electrical and thermal properties of commercial REBCO tapes	10
The effect of bias current configuration on the performance of SQUID arrays	10
Design rules to scale-up magnetic screens made of bulk superconductors and closed-loop coated conductors: modelling and experiments	9
Construction and test result of an all-REBCO conduction-cooled 23.5 T magnet prototype towards a benchtop 1 GHz NMR spectroscopy	9
Peridynamic simulation of fatigue crack propagation of REBCO tapes	9
Synthesis and implementation of low-temperature superconducting filters with lowpass/dual-bandpass combined responses	9
Influences of quenching treatment and cobalt-doping on the thermally activated flux-flow behavior in KCa2(Fe	9
Experimental AC loss study on REBCO coil assemblies coupled with an iron cylinder	9
Prediction of nodal-line fermion and phonon-mediated superconductivity in bilayer α-borophene	9
One-dimensional vortex in superconducting nanowires	9
High critical performance iron-based pancake coils via hot isostatic pressing	9
Quantitative analysis of ITER Poloidal Field joints through rigorous resistivity parameterization	9
Delamination model of an epoxy-impregnated REBCO superconducting pancake winding	9
Natural width of the superconducting transition in epitaxial TiN films	9
Local plastic deformation effects on the critical current of high-Jc Nb3Sn strands under uniaxial strain	9
True stochastic number generator using adiabatic quantum-flux-parametron logic	9
Influence of fracture, exfoliation, and crack on levitation force performance in YBCO high-temperature superconducting bulk	9
Fabrication and characterization of NbN/(TaN/NbN) N stacked Josephson junctions	9
Corrigendum: In-situ synchrotron x-ray photoelectron spectroscopy study of medium-temperature baking of niobium for SRF application (2024 Supercond. Sci. Technol. 37 075007)	9
Numerical study on the transport current distribution in the multi-layer CORC coil	9
Examination of factors affecting strain tolerance of multifilament MgB2 wires with Fe barrier	9
Vortex glass phase transition in two-dimensional Bi2Sr2Ca2Cu3O	9
Pressure-induced superconductivity in Bi4(I1−x Br x )4 crystals grown by chemical vap	9
Optimizing superconducting Nb film cavities by mitigating medium-field Q-slope through annealing	9
Crystalline upper and lower aluminum layers in Al/AlO x /Al tri-layer systems	9
Analysis of local burnout in a sub-scale test coil for the 32 T magnet after spontaneous quenches during fast ramping	9
Optimization of Nb/Al-AlO x /Nb Josephson junctions through wafer-scale anodic oxidation: a systematic characterization and performance analysi	9
Aspects of long range spin–triplet correlations in superconductor/ferromagnet hetero-structures	9
Demonstration of adiabatic quantum-flux-parametron logic using a 3-metal layer niobium process	9
Development of RE-Ba-Cu-O superconductors in the U.S. for ultra-high field magnets	8
Modelling and mitigating flux jumps in bulk high-temperature superconductors during quasi-static, high-field magnetisation	8
Investigating the effect of transverse compressive loads on the electromagnetic performance of superconducting CORC® cables	8
Dynamic guidance performance of HTS bulk under varying external magnetic field	8
Strong paramagnetic response in the superconducting state of Y-containing V0.6Ti0.4 alloys	8
A Rutherford MgB 2 cable with resistive NbTi barriers and a CuNi30 sheath	8
Power deposition in the He bath induced by the Z gradient coil in the 11.7 T Iseult magnet: theory versus measurements	8
Electromagnetic design and analysis of a bell-shaped superconducting magnet for head fMRI using a novel hybrid optimization method	8
Review and prospects of world-wide superconducting undulator development for synchrotrons and FELs	8
Vertical and lateral random vibration of high-temperature superconductor maglev under high-speed operation conditions	8
Training-free demonstration of a 5.4 T Nb3Sn Canted–Cosine–Theta accelerator dipole impregnated with paraffin wax	8
A full-wave high-T c superconducting transformer-rectifier flux pump activated with two electromagnets	8
NbN-based tunnel-type π-junctions for low-power half-flux-quantum circuits	8
A route to fabricate low resistance joints between Eu–Ba–Cu–O bulk, single grain superconductors	8
R&D of on-board metal-insulation REBCO superconducting magnet for electrodynamic suspension system	8
Recovering the performance of irradiated high-temperature superconductors for use in fusion magnets	8
Growth of (Cu,C)Ba2Ca2Cu3O9±δ thin films on flexible Hastelloy tapes	8
Superconducting currents of scarf joints between single-core ex situ MgB2 wires	8
In-depth S/TEM observation of Ti–Hf and Ta–Hf-doped Nb3Sn layers	8
Self-protected high-temperature superconducting demonstrator magnet for particle detectors	8