High Performance Polymers

Article	Citations
Cure behavior and mechanism of cyanate ester with aromatic amines at room temperature	25
Fire retardant polyethylene terephthalate containing 4,4′-(hexafluoroisopropylidene)diphenol-substituted cyclotriphosphazene microspheres	23
Advances in the application of named reactions in polymer synthesis	20
Preparation and properties of high-temperature resistant bisphthalonitrile resins containing trifluoromethyl groups reinforced by poly (aryl ether nitrile) capped by phthalonitrile and their composite	17
Corrigendum to enhanced performance of low-dielectric siloxane-polyimide copolymers: Synthesis and properties	16
The influence of aniline on the properties of polyaniline nanotubes and their polymerisation mechanism	15
Polyimide/fluorinated silica composite films with low dielectric constant and low water absorption	14
A hyper-cross-linked polymer derived from pitch as an efficient adsorbent for VOCs	14
Preparation and properties of benzoxazine precursors containing siloxane units and their epoxy copolymers	13
Property investigation for high-Performance Polyimides fabricated via compression molding in solid-like state	12
Effect of glass fibers length on the properties of polytetrafluoroethylene composites reinforced by glass fibers and graphite: Experimental and simulation study	12
Synthesis of novel poly(arylene ether amide) containing aliphatic ring for optical property	12
High fire-safety phosphorus-containing polyethylene terephthalate with well-balanced comprehensive performances by reactive blending with liquid crystalline copolyester	12
Crosslink density and mechanical property evolution during the curing of polyurethane-urea/sodium silicate hybrid composites	12
Effects of UV irradiation time on the molecular structure of typical engineering plastics and tribological properties under heavy load	11
Sustainable synthesis of a novel bio-based low temperature curable benzoxazine monomer from quercetin: Synthesis, curing reaction and thermal properties	11
Preparation of halogen-free flame retardant curing agent and its application in epoxy resin	10
Polyimides with ultra-low coefficient of thermal expansion derived from diamine containing bisbenzimidazole and bisamide	10
High-performance quinoxaline-containing phthalonitrile resin: Synthesis, curing kinetics, and properties	10
Synthesis of a phosphorus and triazole-containing compound and its enhancement on flame retardancy and mechanical properties of an epoxy resin	10
Determination of activation energy for carbon/epoxy prepregs containing carbon nanotubes by differential scanning calorimetry	10
Novel poly(arylene ether nitrile) containing pendant aliphtatic ring in the chain: Synthesis and properties	10
Aromatic (Co)polycarbonates bearing pendant norbornenyl groups: Synthesis, characterization and post-polymerization modification	10
The effects of the inclusion of 1,2,4-triazole derivatives into the main chains of the polyurethane urea exposed to UV radiation	9
Molecular dynamics study on the crosslinking reactions and performance characteristics of epoxy resins	9

The fabrication of polyimide-based tunable ternary memristors doped with Ni-Co coated carbon composite nanofibers	9
Dendritic silicon-containing arylacetylene resin with low curing temperature and high heat resistance	9
Improving the thermal conductivity of PEEK composites with PEI-assisted dispersion of carbon-based fillers	9
Synthesis and characterization of 4-pyridine-bridge polybenzimidazolefor proton exchange membranes	8
Directional porous polyimide/polyethylene glycol composite aerogel with enhanced CO2 uptake performance	8
Ionic liquid doped solid polymer electrolyte: Synthesis, characterization and applications ICSEM-2021	8
Synthesis and characterization of nitrogen-rich polybenzoxazines for energetic applications	8
Synthesis, ring-opening polymerization, and properties of benzoxazines based on o- and p-hydroxybenzyl alcohols	8
Surface modification of kevlar fabric with a novel sulfonyl aryl containing monomer and its influence on inter yarn friction	8
Curing behavior and properties of ultra-high temperature resistant RTM bismaleimide resin	8
Enhancement of processability and dielectric properties of bismaleimide resins with benzoxazines containing reactive secondary amine groups	8
State-of-the-art review on poly(aryl-ether-ketone) and its nanocomposites for high-performance applications	7
Biodegradable and highly conductive polymeric blend based on the latex of Calotropis gigantea as solid electrolyte in energy storage applications	7
Change in charge carrier dynamics by incorporating ionic liquid into poly ethylene oxide–based sodium acetate polymer electrolytes	7
Friction and wear characteristics of synthetic diamond and graphene-filled polyether ether ketone composites	7
Synthesis and characterization of low retardation colorless polyimides containing m-phenylenediamine with different pendant groups	7
Bipyridine containing poly(amic-acid)s: Synthesis, characterization, and sorption behavior toward the Ni (II) ions	7
Preparation and dielectric properties of polyimide-based composites with Al-Nb co-doped SiO2	7
Preparation and mechanical properties of Ni/RGO reinforced epoxy resin composites	7
Preparation and characterization of a carborane polyurethane with excellent high carbon residue and flame retardancy	7
Highly selective sulfonated Poly (arylene ether nitrile) composite membranes containing copper phthalocyanine grafted graphene oxide for direct methanol fuel cell	7
Modified hollow glass microsphere isocyanate-based polyimide foam composite with improved mechanical and thermal insulation properties	7
Effect of hydroxylated boron nitride and boron nitride nanosheets on the properties of doped organosilicone rubber composites	6
Synthesis of polyetherimide with different end groups and their influence mechanism on the toughness of epoxy resin and its composites fabricated by resin transfer molding	6
Fabrication and characterization of modified POD membranes with ultra-high tensile strength through hydrogen bonding functioning and copolymerization	6
Preparation of high temperature resistant polycarbonate via ionic liquid activation of bisphenol fluorene under mild conditions	6
Design of novel silicon-containing alkynyl diamines and their related thermosetting polyimide resins	6
Synthesis of a highly efficient flame retardant containing triazine and pentaerythritol phosphate groups and its intumescent flame retardancy on epoxy resin	6
Design of photosensitive polyimides with improved solubility, thermal stability and mechanical strength	6
A facile strategy to improve the strength and toughness of high-performance polymers and recycling by dynamic Ni-coordination crosslinking	6
Achieving synergistic viscosity and mechanical performance in Poly(aryl ether ketone) copolymers through bisphenol A-phenolphthalein side group ratio modulation	6
A novel flame retardant consisting of functionalized Salen-Ni based polyphosphazene microspheres	6
The effects of solvents on the physical and electrochemical properties of potassium-ion conducting polymer gel electrolytes	6
Effect of gamma-rays on the thermal and mechanical properties of epoxy/tungsten boride composites	6
Transparent low-flammability epoxy resins using a benzoguanamine-based DOPO derivative	5
Preface	5
Viscoelastic behaviour of poly(ether-ketone)/fly ash composites fabricated by powder metallurgical route	5
Design, synthesis and characterization of high refractive index aromatic polyesters containing fluorene and thioether groups	5
PI-based composites with high dielectric constant and low loss by filling with self-derived carbon	5
Polyimide aerogels with low thermal conductivity and high-temperature stable properties prepared by lyophilization for flexible thermal protection	5
A polyimide/poly(N-vinylimidazole) membrane for CO2/CH4 separation with high selectivity and permeability	5
Impact of recovered silicon particles incorporation on tribo-characteristics of a poly ether ether ketone polymer composite	5
The role of intramolecular and intermolecular hydrogen bonding effect for adenine-containing polyimide films	5
Highly conducting corn starch doped ionic liquid solid polymer electrolyte for energy storage devices	5
Synthesis and Characterization of Novel Non-conjugated hyperbranched polysiloxanes with AIE Effect	5
Effect of layering angles on shape memory properties of graphene oxide/carbon fiber hybrid reinforced composites prepared by vacuum infiltration hot pressing system	4
Synthesis of a new flame retardant and performance study of flame retardant epoxy resin	4
Improved flame retardancy and smoke suppression properties of phenolic resin by incorporating MoO3 particles	4
Novel Polyimide-block-poly(dimethyl siloxane) copolymers: Effect of time on the synthesis and thermal properties	4
Flame-retardant functionalized boron nitride for epoxy resin with excellent flame retardancy and enhanced thermal conductivity	4

Application of machine learning in polyimide structure design and property regulation	4
New polyimide ionomers derived from 4,4′-diamino-[1,1′-biphenyl]-2,2′-disulfonic acid for fuel cell applications	4
Thermo-oxidative aging and thermal cycling of PETI-340M composites	4
Mechanical, thermal and gas separation properties of copolyimides and their thermal rearrangement copolymer membranes with spirobisindane structures	4
An overview on the progress and development of modified sulfonated polyether ether ketone membranes for vanadium redox flow battery applications	4
Effect of highly thermally conductive Ag@BN on the thermal and mechanical properties of phthalonitrile resins	4
Development of solid polymer electrolytes based on poly (ethylene oxide) complexed with 2-trifluoromethyl-4, 5-dicyanoimidazole lithium salt and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl	4
Mechanical and tribological properties of polytetrafluoroethylene reinforced by nano-ZrO2: Molecular dynamic simulation	4
Synthesis and microwave absorption studies on 2D graphitic carbon nitride loaded polyaniline/polyvinyl alcohol nanocomposites	4
Synthesis of quaternary copolymerized fluorine-containing polyimides with good thermal properties and low dielectric constant	4
Research progress on preparation methods of water-soluble polyaniline	4
Preface	4
Transparent polyimide films with ultra-low coefficient of thermal expansion	3
Synthesis, characterization and post-modification of aromatic (Co)polyesters possessing pendant maleimide groups	3
Two high toughness and flame retardant DOPO-containing polybenzoxazines based on polyether-urea	3
Ballistic studies on Kevlar - glass fibre hybrid laminated epoxy composites	3
Preparation and performance of acrylic acid grafted PES ultrafiltration membrane via plasma surface activation	3
Ionic liquid-modified polyimide membranes with in-situ-grown polydopamine for separation of oil–water emulsions	3
Fabrication of high performance polyimide fibers by dry-jet wet spinning technology	3
Evaluation of augmented thermal, thermo-mechanical, mechanical properties of nano alumina reinforced TGDDM epoxy nanocomposites	3
A high-performance silicon-containing arylacetylene resin with conjugated naphthalene rings	3
Polyimides from 2,5-bis[4-(4-aminophenoxy)benzoyl]furan and their thermal crosslinking reaction	3
Preparation and electrochemical properties of thieno-[3,4-b] pyrazine conjugated polymer composite supercapacitor carbon powder electrode materials for Li-organic battery	3
Modification of bisphenol a type epoxy resin by biobased magnolol epoxy	3
Preparation and characterization of soluble heat-resistant polyimide films containing bis-N-phenyl-benzimidazole	3
High performance electrode material for Li-organic battery based on quinoxalin-thiophene conjugated polymer/carbon powder composite	3
Polyethylene-oxide: NaI polymer electrolyte: Electrical, structural and photoelectrochemical studies	3
Highly efficient ionic‐liquid based solid polymer electrolyte for energy device (RAFM 2022)	3
Synergistic toughening of silicon-containing arylacetylene resin via allyl bisimide blending	3
Preparation and gas separation performance of polyimide membranes endcapped with ionic liquid-type structures	3
Preparation and characterization of PMR-type polyimides from furan-based diamines	3
Preparation of phthalonitrile resin/calcium sulfate whisker composites with enhanced wear and heat resistance	3
Analysis of the impact of exfoliated graphene oxide on the mechanical performance and in-plane fracture resistance of epoxy-based nanocomposite	3
Determination of thermal degradation for high-performance thermoplastic composites manufactured by laser-assisted automated fibre placement	3
Preparation and characterisation of heat‐resistant fluorinated co‐polyimides and their gas transport characteristics	3
Fabrication and tribological behavior of MnO2/epoxy nanocomposites	3
Novle layered boron nitride nanosheets/cellulose nanofibers/epoxy composite with high thermal conductivity	3
Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone	3
Structure and properties of thermoplastic polyimide based on 4′,4′—(oxybis (methylene)) bis ([1.1′- bipheny]3-amine) diamine	3
Preparation of thermally rearranged (TR) copolybenzoxazoles with enhanced gas permeability	3
3D printing polycaprolactone micro-nano copper scaffolds with a high antibacterial performance for potential sewage treatment	3
The history, interests and future of polyphenylene sulfide: A bibliometric analysis	3
Influence of charge carrier density, mobility and diffusivity on conductivity–temperature dependence in polyethylene oxide–based gel polymer electrolytes	3
Multi-synergy effects-induced high electric breakdown field in polymer composites via 0D/2D design	3
Investigation of thermal, mechanical, flammable and electrochemical properties of biomass derived carbon/epoxy resin composites	3
Significantly enhanced thermally conductive epoxy composite composed of caterpillar-like structured expanded graphite/ boron nitride nanotubes	3
Copolymerization of novel self-promoted curing phthalonitrile with epoxy resin and its thermal property	2
Preparation and performance of sulfonated poly(ether ether ketone) membranes enhanced with ammonium ionic liquid and graphene oxide	2
Phthalide cardo chain extended imine skeletal linked maleimido end capped nanotitania reinforced novel polybenzoxazine (nTiO2/PBZ) hybrid nanocomposites	2
Thermal, electrical and mechanical properties of carbon fiber/copper powder/carbon black reinforced hybrid Polyamide 6,6 composites	2
Carbon molecular sieve hollow fiber composite membrane derived from PMDA-ODA polyimide for gas separation	2
Study on properties of copolymers based on different types of benzoxazines and branched epoxy resins	2
A novel proton exchange membrane derived from trisulfonated poly(arylene ether phosphine oxide) containing diphenyl ether moieties	2
Forming method, crystallinity, and mechanical performance of buckypaper/carbon fiber/polyether ether ketone multi-scale thermoplastic composites	2
Effect of perlite on the thermal conductivity, thermal degradation and mechanical properties of epoxy materials	2
Polyarylates containing phthalazinone moieties with excellent thermal resistance	2
Synthesis and characterization of cyano-terminated bisphenol AF-type polyarylene ether nitrile	2
New strategy for the development of lightweight ballistic armors with limited backface signature	2
Study on the curing characteristics and properties of phthalonitrile resin cured with organic guanidine	2
A novel anion exchange membrane comprised of three aromatic units for fuel cells	2
Soluble imide oligomers containing benzoxazole structures	2
Polyimide films with high strength and toughness synthesized utilizing a synergistic strategy of stiffness-flexibility harmonization	2
Synthesis and properties of polyarylene ether nitrile random copolymer containing naphthalene and biphenyl structure	2
Evaluation of aluminum to composite bonded lap joints	2
Effect of ammonium iodide on the structure and ionic conductivity of carboxymethyl cellulose-based gel polymer electrolytes for electrochemical devices	2
Synthesis and characterization of a novel P/N containing flame retardant and its effect on flame-retardancy, thermal and mechanical properties of epoxy/clay nanocomposites	2
High performance poly(isatin alkyl-terphenyl)s proton exchange membranes with flexible alkylsulfonated side groups	2
Novel phenolphthalein-based aromatic polyesters: The investigations of the relationships between refractive index and structure	2
Thermal, mechanical, and gas separation performance of polyimides and their thermally rearranged membranes with spirocyclic structures	2
Research advances in preparation, mechanism and application of thermally conductive and electrically insulating polymer composites in thermal management materials: A review	2
Unlocking efficiency: Imidazole-nitrile based catalyst as latent thermal curative for improved epoxy resin curing and exploring mechanical behavior	2
Improving UV aging resistance by loading PDA on the surface of PBO fibers via Fe (III) coordination	2
Preparation and properties of polyimides containing cyano and Cardo structures	2
Preparation and characterization of a low viscosity epoxy resin derived from m-divinylbenzene	2
Preparation and compression mechanical properties of carbon fiber/epoxy nanoparticle composites	2
Recent advances in thermally conductive polymer composites	2
The characteristics of high temperature polymer fuel cell electrolyte membranes based on 2-pyridene polybenzimidazole blends with poly(vinyl-phosphonic acid)	2
Synthesis and characterization of adamantane-based copolyimides with high transparency	2
Regulating the electrical resistive switching behaviors of polyimides through different steric hindrance substituents on 2,7-position of tetraphenyl fluorene diamines moieties	2
Preparation of microencapsulated ammonium polyphosphate and study on flame retardancy of epoxy resin composites	2

Synthesis and characterization of new polyarylate containing phthalazinone moiety	2
A novel carbazole based bismaleimide monomer: Synthesis, characterization, thermal and optical properties	2
Hydrophilicity and flux properties improvement of high performance polysulfone membranes via sulfonation and blending with Poly(lactic acid)	2
Enhanced performance of low-dielectric siloxane-polyimide copolymers: Synthesis and properties	2