Proceedings of the Institution of Mechanical Engineers Part H-Journal

Article	Citations
Deep learning and robotics enabled approach for audio based emotional pragmatics deficits identification in social communication disorders	71
Metatarsal bone model production using 3D printing and comparison of material properties with results obtained from CT-based modeling and real bone	38
Stress-strain and fatigue life numerical evaluation of two different dental implants considering isotropic and anisotropic human jaw	36
Understanding the properties of intermittent catheters to inform future development	35
Optimization and control of robotic vertebral plate grinding: Predictive modeling, parameter optimization, and fuzzy control strategies for minimizing bone damage in laminectomy procedures	24
In vitro evaluation of temperature change on the root surface after the removal of root canal filling	20
Research on an ankle rehabilitation robot for hemiplegic patients after stroke	20
Torsional behavior of peripheral vascular stents: The role of stent design parameters	20
The comparison between various methods of mandibular reconstruction based on finite element analysis	20
Intramuscular EMG feature extraction and evaluation at different arm positions and hand postures based on a statistical criterion method	19
A deep learning-based real-time hypothermia and hyperthermia monitoring system with a simple body sensor	19
Effectiveness of virtual reality rehabilitation for cervical spinal cord injury: A systematic review and meta-analysis	17
Effects of custom-made insole on the mechanical response characteristics of the foot during static standing and walking	16
Mechanical tissue changes caused by liquid jet blasting of the aortic cannula	16
Utilization of a nonlinear autoregressive neural network with exogenous inputs for foot trajectory generation for upslope terrain	16
FEM modeling of lateral collateral & medial collateral ligaments for use in total knee arthroplasty surgery simulation	16
Mechanobiological design strategy for additively manufacturable tibial ankle implant for enhanced biomechanical and osseointegration performance: A finite element and machine learning approach	15
Mechanism and control strategy design of a multi-position nursing bed for bedridden elderly care	15
The tipping point: Friction and thigh length influence imminent falls from a tilting ski lift chair	14
The effects of material and structural properties of the periodontal ligament in mechanical function of tooth-PDL-bone complex in dental trauma: A sensitivity study using finiteelement analysis	14
Semi-supervised approach to identify steps, shoes, and gender of older adults under semi-naturalistic conditions using a waist-worn inertial sensor	13
Advanced prediction method of biological tissue mechanical response based on hybrid prediction model	13
A proposal to analyze muscle fiber type composition in the soleus muscle of untrained subjects and sprinters using surface EMG signals	13
In-vitro external fixation pin-site model proof of concept: A novel approach to studying wound healing in transcutaneous implants	12
Did wear simulator testing indicate biotribological risk for the ASR hip implant systems prior to market release circa 2004?	12

Tibial post loading increases the risk of aseptic loosening of posterior-stabilized tibial prosthesis	12
Overloading effect on the osmo-viscoelastic and recovery behavior of the intervertebral disc	12
Novel bone cement based on calcium phosphate composited CNT curcumin with improved strength and antitumor properties	12
Materials for 3D printing in healthcare sector: A review	11
Non-rigid cutting characteristics and separation mechanisms of soft muscle tissue under waterjet impact	11
Effect of ultrasonic assisted bone cutting parameters on cutting time and temperature in the animal bones	11
Magnetically steerable catheters: State of the art review	11
Electromyographic and co-activation patterns during landings: A sex-based analysis in athletes	10
Biomechanical analysis of single- and double-level cervical disc arthroplasty using finite element modeling	10
Hierarchical wrinkle pattern drives tenogenic differentiation from human mesenchymal stem cells	10
A novel numerical approach to elucidate experimental scatter in portal pressure measurement using ultrasound contrast agent	10
Measurement of the wear volumes generated within retrieved magnetically controlled growing rods	10
Upper body instability in people with Parkinson’s disease: A kinematic study	10
Normative database of response surface method for human trunk extension in isometric mode	10
Mechanical influence of tissue scaffolding design with different geometries using finite element study	10
Muscle model control of knee joint torque in a powered lower-body orthosis	10
RETRACTION NOTICE: Skin cancer diagnosis based on a hybrid AlexNet/extreme learning machine optimized by Fractional-order Red Fox Optimization algorithm	10
Differences in muscle coordination between older men and women during brisk walking	9
Au NPs-based nanoarchitectures for targeted drug delivery applications	9
The influence of arterial stenosis on blood damage under continuous flow	9
Study on damage of the macrostructure of the cochlea under the impact load	9
Explant analysis of a chromium nitride coated metal-on-metal total wrist replacement: A case study	9
The use of conformal lattice metamaterials for relieving stress in lower limb sockets: A numerical and exploratory study	9
Novel Bioactive Magnesium-Hopeite composite by friction stir processing for orthopedic implant applications	9
Early failure of a highly cross-linked polyethylene inlay after total hip arthroplasty probably due to insufficient irradiation	9
Thermometry using entropy imaging of ultrasound radio frequency signal time series	8
Degradation of an ultrasonically welded device for surgical suture holding	8
Prediction of excess cement residues using a regression model to avoid peri-implant diseases: An in vitro study	8
Computational simulation of applying mechanical vibration to mesenchymal stem cell for mechanical modulation toward bone tissue engineering	8
Robot-assisted rehabilitation: Collaborating a smart avatar with an AAN controller	8
Preliminary tribological results of a new total temporary hip joint prosthesis spacer	8
Effects of self-expandable pedicle screws with shape memory alloy structures on spinal fixation strength: A finite element study	8
Biomechanical design optimization of distal femur locked plates: A review	8
Automated SEM image analysis of electrospun PVA nanofibers for skin tissue engineering: Integrating morphological, fractal, and statistical characterization using MATLAB App Designer	8
Smart face shield for the monitoring of COVID-19 physiological parameters: Personal protective equipment (PPE) for health-care workers (HCW’s) and COVID-19 patients	8
A novel preoperative prosthetic position planning algorithm for total hip arthroplasty based on the no-impingement principle: A case study	8
Role of Artificial Intelligence and Machine Learning in the prediction of the pain: A scoping systematic review	7
Friction between human skin and incontinence pads in the presence of barrier protection products	7
On the soft tissue ultrasound elastography using FEM based inversion approach	7
PolyEffNetV1: A CNN based colorectal polyp detection in colonoscopy images	7
Welcome to Engineering in Medicine 2025	7
Fluid-structure interaction and structural simulation of high acceleration effects on surgical repaired human mitral valve biomechanics	7
Quantitative assessment of image artifacts from zygoma implants on CBCT scans using different exposure parameters	7
A scoring system to evaluate stability of percutaneous osseointegrated implants for transfemoral amputation with validation in the ITAP clinical trial	7
Bone remodelling around internal fracture fixations used for treating femoral neck fractures: A finite element analysis	7
Multi-objective optimization of cortical bone grinding parameters based on particle swarm optimization	7
Interpretable prediction of knee joint loading during tennis serves based on GNN-GRU model and layer-wise relevance propagation	7
A co-designed gamified mHealth platform for adolescents and young adults with intellectual and developmental disabilities: System architecture and mixed-methods proof-of-concept	7
The effect of compression application and exercise on interface pressure (IP) gradients in healthy volunteers	7
Breathing pattern and its evaluation by muscle dynamometer md03	6

Experimental testing of fracture fixation plates: A review	6
Development and experimental validation of a dynamic numerical model for human articular cartilage	6
Antibacterial performance of nanosecond laser irradiated zirconium-based bulk metallic glass	6
Comparison of wear on articular cartilage from polycarbonate-urethane and other implant biomaterials	6
The influence of passive prosthetic knee joints on uneven compliant surface walking among transfemoral amputees under dual-task versus single-task conditions	6
Scapular muscle dynamic stiffness of asymptomatic subjects and subjects with chronic shoulder pain, at rest and isometric contraction conditions	6
Effect of anterior cruciate ligament injury on acceleration response of knee joint	6
Biomechanical effects of intra-abdominal pressure and genital hiatus on the pelvic floor in initial injury	6
An AI based digital-twin for prioritising pneumonia patient treatment	6
Physics-based in silico modelling of microvascular pulmonary perfusion in COVID-19	6
A review on background, process and application of electrospun nanofibers for tissue regeneration	6
Phantom validation of a novel RSA-based impingement metric to assess component-on-component impingement risk	6
Sheathed fixation improves BASHTI technique in an anterior cruciate ligament reconstruction	5
Design modification and selection of improved stem design of the conical stem tibial implant for TAR using FE analysis and different MCDM methods	5
Investigating the bacterial cleaning performance on Zr-BMG with LIPSS after ultrasonic vibration assisted cleaning	5
A comparison of stiffness of six knee braces with application for posterolateral corner reconstructions	5
Quantitative assessment of cognitive profile and brain asymmetry in the characterization of autism spectrum in children: A task-based EEG study	5
Artificial intelligence and hemodynamic studies in optical coherence tomography angiography for diabetic retinopathy evaluation: A review	5
Detecting and monitoring incontinence associated dermatitis: Does impedance spectroscopy have a part to play?	5
A wavelet and local binary pattern-based feature descriptor for the detection of chronic infection through thoracic X-ray images	5
Electrogastrography in patients with gastric motility disorders	5
Chewing simulation parameters and mechanical properties of composites as used in dental bio-materials	5
Influence of the camera calibration process on the accuracy of vision-based 3D reconstruction for human gait analysis	5
Retracted: “Optimized lung tumor diagnosis system using enhanced version of crow search algorithm, Zernike moments, and support vector machine”	5
Piezoresistivity modeling of soft tissue electrical-mechanical properties: A validation study	5
Engineering functional and anthropomorphic models for surgical training in interventional radiology: A state-of-the-art review	5
Unified modeling of pelvic transverse rotations across walking, jogging, running, and sprinting using a single-sensor: Minimal limit cycle approach	5
Technology for managing incontinence: What are the research priorities?	5
Localizing epileptogenic network from SEEG using non-linear correlation, mutual information and graph theory analysis	5
Deep convolutional neural network algorithm for the automatic segmentation of oral potentially malignant disorders and oral cancers	4
Virtual muscles and reflex control generates human-like ankle torques during gait perturbations	4
Synthesis of hydroxyapatite /Zeolite/Perlit hybrid coatings on human tooth by hydrothermal method and their in vitro behaviour	4
Transfer learning supported accurate assessment of multiclass cervix type images	4
Biomechanics of plate fixation following traditional olecranon osteotomy versus novel proximal ulna osteotomy for visualizing a distal humerus injury	4
The implication of oversampling on the effectiveness of force signals in the fault detection of endodontic instruments during RCT	4
The effects of sandblasting and acid etching variables on surface micro-roughness of dental implants: Determination of controlled values	4
The unmet needs in vaginal pessaries	4
Linear jerk variability evaluation in measurements of motor control trainability: Could kinematic variables encompass information about strength and dynamic balance?	4
Cross-modal fusion of external magnetic sensing and simulated 2D imaging for 3D guidewire pose estimation	4
A structural approach to 3D-printing arterial phantoms with physiologically comparable mechanical characteristics: Preliminary observations	4
Biomechanical comparison of porcine mitral leaflets with porcine small intestinal submucosa extracellular matrix	4
A comparative evaluation of primary stability of two dental implant systems in synthetic and natural bone	4
Assessment of the incisor angles as a function of golden proportion and lower facial height	4
Sensitivity of muscle force response of a two-state cross-bridge model to variations in model parameters	4
Parametric design and mechanical performance analysis of hierarchical porous structures	4
Recent advances in wearable actuated ankle-foot orthoses: Medical effects, design, and control	4
In vitro comparative study of wall portbased high-frequency chest wall oscillation device and internal air-pulse generator device	4
Evaluation of electrode-tissue contact using multifrequency impedance analysis and Cole-Cole model fitting	4
Sedentary behavior, but not daily step count, is associated with vitamin D status in postmenopausal women: An accelerometer-based study	4
Comparative analysis of fretting-corrosion at stem-cement and stem-head interfaces in stainless steel implants: Implications for adverse tissue reactions	4
Chondrogenic potential of superficial versus cartilage layer cells of the temporomandibular joint condyle in photopolymerizable gelatin-based hydrogels	4
Evaluation of the lumbar and abdominal muscles behavior in different sagittal plane angles during maximum voluntary isometric extension	4
Detection of periprosthetic fractures around the femoral stem by resonance frequency analysis: An in vitro study	4
Incorporating patient-specific hip orientation from weightbearing computed tomography affects discrete element analysis-computed regional joint contact mechanics in individuals treated with periacetab	4
Dynamic balance during walking in people with multiple sclerosis: A cross-sectional study	4
A convolutional neural network for high throughput screening of femoral stem taper corrosion	3
Critical review on additive manufacturing based biomedical and biosensors application	3
RETRACTED: Brain tumor diagnosis from MRI based on Amended Water Strider Algorithm	3
Classification of SSVEP-EEG signals using CNN and Red Fox Optimization for BCI applications	3
The influence of Kitchon-RCAA on biomechanics of maxillary tissues based on indirect action: A finite element analysis	3
An experimental study on the behavior of enamel-dentin in human teeth at low strain rates	3
Cellulose acetate scaffold coated with a hydroxyapatite/graphene oxide nanocomposite for application in tissue engineering	3
Effect of polydimethylsiloxane surface morphology on osteogenic differentiation of mesenchymal stem cells through SIRT1 signalling pathway	3
Non-invasive grading of brain tumors using online support vector machine with dynamic fuzzy rule-based parameters optimization	3
A simultaneous calibration method of robot kinematic parameters and hand-eye parameters for orthopedic surgical robot systems	3
Deep learning-based tooth segmentation methods in medical imaging: A review	3
Evaluating fixation techniques to prevent subsidence in cervical corpectomy models using low and high-density polyurethane blocks	3
Interface pressure reduction in the sacral and ischial regions during neuromuscular electrical stimulation at 60° head-of-bed elevation	3
Evaluation of the effect of different irrigation solutions on the microhardness of heat-treated nickel-titanium files: An in vitro study	3
Mechanical compliance and anti-migration performance of auxetic tracheal stents with multi-circular cores	3
Comparison of IMU set-ups for the estimation of gait spatio-temporal parameters in an elderly population	3
Impact-Based Analysis Method (IBAM) to evaluate the primary stability of the pedicle screw: A proof of concept	3
Simple recognition of hand gestures using single-channel EMG signals	3
Surface roughness optimisation in FFF tibial insert patterns for silicone mould	3
Biodegradable mesh implants for prolapse repair: Advances in computational modelling and experimental validation	3
Biomechanical comparison of proximal, distal, and anatomic tibial tunnel for transtibial posterior cruciate ligament reconstruction	3
Nonlinear viscoelastic models improve characterisation of 6 DOF intervertebral disc load response at low strain rates	3
Empirical joint contact mechanics: A comprehensive review	3
Novel methods to quantify gait rehabilitation following ankle-foot fractures	3
The effect of different mechanism combinations on sliding between brace and lower limb during walking and leg-raising	3

Using artificial intelligence models to evaluate envisaged points initially: A pilot study	3
Using an instrumented hammer to predict the lateral hinge fracture in high tibial osteotomy: A cadaveric study	3
Finite element framework for investigating the mechanical response of podiatric insole: A pilot study	3
Influence of material heterogeneity on the mechanical response of articulated cartilages in a knee joint	3
Automated rapid design method for personalized gradient pressure-relieving insoles	3
Open data-driven analytics for active and healthy municipalities: A systematic review	3
Skin lesion classification using HG-PSO and YOLOv7 based convolutional network in real time	3
In-silico study of type ‘B’ condylar head fractures and evaluating the influence of two positional screw distance in two-screw osteosynthesis construct	3
Fatigue life estimation of dental implants using a combination of the finite element method and traditional fatigue criteria	3
The effects of applying a novel cleaner on the bonding strength of zirconia surfaces	3
Influence of muscle soft tissue and lower limbs on the vibration behavior of the entire spine inside the seated human body: A finite element study	3
Homogeneous material models can overestimate stresses in high tibial osteotomy: A finite element analysis	3
Topological optimization and biomechanical analysis of porous fusion cage with TPMS structures	3
Optimization of activity-driven event detection for long-term ambulatory urodynamics	3
The effect of friction stir process on the mechanical, tribological, and biocompatibility properties of AZ31B magnesium alloy as a biomaterial: A pilot study	2
Management of comminuted extra-articular distal femoral fracture: A finite element study	2
Regional differences in electroactive response of the sclera	2
Impacts of mixing techniques and vacuum levels on the structural and mechanical properties of PMMA bone cement: A comparative study	2
Development of small bone implants using a mean shape bone in a porcine model for carpal bone replacement	2
Micro shear bond strength of mineral trioxide aggregate to different innovative dental restorative materials	2
MR conditional prostate intervention systems and actuations review	2
A developed multibody knee model for unloading knee with cartilage penetration depth control	2
Resistance model of an active capsule endoscope in a peristaltic intestine	2
Computer-aided diagnosis of autism spectrum disorder from EEG signals using deep learning with FAWT and multiscale permutation entropy features	2
Risk factors for periprosthetic femoral fracture risk around a cemented polished taper-slip stem using an osteoporotic composite bone model	2
Dynamic analysis and control of a hybrid lower limb rehabilitation robot to reduce human-robot interaction forces	2
Prior skeleton based online deep reinforcement learning for coronary artery centerline extraction	2
Exoskeleton design utilizing foot-strike energy for enhancing the climbing ability of the wearer	2
A novel design of hip-stem with reduced strain-shielding	2
Development of porous customized Ti-6Al-4V cranial implant manufactured by laser beam powder bed fusion	2
A systematic review of energy storing dynamic response foot for prosthetic rehabilitation	2
Optimization-based two-dimensional symmetric tossing motion prediction and validation	2
Role of 3D printing in healthcare: A comprehensive review on treatment and training	2
Development and preliminary evaluation of a transducer guiding system for hand ultrasound: With a focus on reproducibility and operational stability	2
Understanding coronary bypass grafts from mechanical constitutive models to machine learning: A review	2
Biomechanical evaluation of two internal fixation systems for the treatment of mandibular symphyseal fracture	2
Mechanical and fatigue resistance of restorations supported by welded-framework and realized using computer-aided designed prosthetic shells: In vitro pilot study	2
Pedicle screw pull-out testing in polyurethane foam blocks: Effect of block orientation and density	2
Analysis of microvascular pattern in diabetes mellitus condition using the nailfold capillaroscopy images	2
Optimum design of the geometry of boots and socks with the aim of minimum weight and preventing frostbite	2
Synthesis methods of Mg-based scaffolds and their applications in tissue engineering: A review	2
Thoughts and perspectives on biomechanical numerical models under impacts: Are women forgotten from research?	2
An estimation of the biomechanical properties of the continent and incontinent woman bladder via inverse finite element analysis	2
Safety and efficacy of intracavitary microwave ablation in hepatic gland tumours: Numerical and in vitro studies	2
The effect of structural changes on the low strain rate behaviour of the intervertebral disc	2
Theoretical modeling approach for adsorption of fibronectin on the nanotopographical implants	2
Radiolucent lines in a cementless hip stem: The use of semi-automated measurements to monitor progression over a 10 year period	2
Research priorities for diagnostic instrumentation in urinary incontinence	2
Co-electrospun PCL-collagen nanofibers containing saffron-synthesized gold nanoparticles as an antioxidant wound dressing	2
Comparative study of two retrograde locked intramedullary nail designs for ankle arthrodesis: A finite element analysis	2
Biomechanical effect of age-related structural changes on cervical intervertebral disc: A finite element study	2
Boron-incorporated biocomposite coatings on 316L and NiTi alloys: Enhanced structural, antibacterial activity, and cell viability performances	2
Comparison of anterior and posterior wheeled walkers based on body weight support in improving gait function a subjects with spinal cord injury: A case study	2
Finite element analysis of lattice designed lumbar interbody cage based on the additive manufacturing	2
A CAD-to-Simulink framework for evaluating impingement-free motion in reverse total shoulder arthroplasty	2
Analysis of diffusion of plant metabolites from polyethylene glycol hydrogels using free volume theory	2
Biomechanical evaluation of a fully cortical-threaded screw for modified cortical bone trajectory fixation: Combined experimental and finite element study	2
Significantly better precision with new machine learning versus manual image registration software in processing images from single-plane fluoroscopy to determine tibiofemoral kinematics following tot	2
Orthotropic characterization of trabecular bone remodeling in human femur: A biomechanical study	2
Investigation of joint contact forces during walking in the subjects with toe in gait due to increasing in femoral head anteversion angle	2
Effect of whole-body vibration at different frequencies on the lumbar spine: A finite element study based on a whole human body model	2
Laser textured Ti-6Al-7Nb alloy for biomedical applications: An investigation of texturing parameters on surface properties	2
Generation and analysis of synthetic surface electromyography signals under varied muscle fiber type proportions and validation using recorded signals	2
Variability in inter-segmental coordination of the lower limb in older adults during walking: An analysis with toe-only rocker sole shoes	2
The effect of file type and DXA protocol on an image processing fracture risk prediction tool	2
Evaluation of surface alterations in two nickel-titanium files following repeated use: A scanning electron microscopy study	2
Effect of cage surface geometry on load transfer and ranges of motion in a fused lumbar spine model: A comparative finite element analysis	2
Investigating the effects of geometrical parameters of an artificial cervical disc in vulnerable neck positions on the stress distribution in the spine using 3D finite element analysis	2