Journal of the European Ceramic Society

Article	Citations
Low-temperature solution processing route for potassium sodium niobate (KNN) thin films	266
Exploring the sintering behavior of a complex ceramic powder system using in-situ X-ray nano-tomography	265
Editorial Board	189
Fabrication of Al2O3GAGG:Ce composite ceramic phosphors with excellent color quality for high-power laser-driven lighting	174
Grain growth and segregation in Fe-doped SrTiO3: Experimental evidence for solute drag	159
Enhancing luminescence from visible to mid-infrared: Controllable crystallization in ZnF2-AlF3 fluoride glass-ceramics	134
Thermoelectric and mechanical properties of Bi0.42Sb1.58Te3/SnO2 bulk composites with controllable ZT peak for power generation	131
Microstructure, mechanical properties and aging resistance of 12Ce-TZP reinforced with alumina and in situ formed manganese cerium hexaaluminate precipitates	122
High-reliability data processing and calculation of microstructural parameters in hydroxyapatite scaffolds produced by vat photopolymerization	117
Microstructure evolution and mechanical properties of YAG/YAG joint using bismuth-borate glass	114
Remarkable energy-storage performances and excellent stability in CaTiO3-doped BiFeO3-BaTiO3 relaxor ferroelectric ceramics	113
Preparation and properties of Ti3SiC2 preform reinforced SiC ceramic matrix composites	111
Preparation of high performance MgO ceramic filter and its interaction with molten steel: Effect of porous MgO powder	98
Triple-doping of (Ga1/2Nb1/2) Ti1-O2 ceramics with Al3+ for enhanced giant dielectric response with simultaneous decrease in dielectric loss	98
Promoting transparency: Defect-driven sintering of Gd2Zr2O7 ceramics for advanced radiation applications	96
Binary transparent (Ho1-Dy )2O3 ceramics: Compositional influences on particle properties, sintering kinetics and Faraday magneto-optical effects	90
Calcium-Magnesium-Aluminosilicate (CMAS) corrosion resistance of high entropy rare-earth phosphate (Lu0.2Yb0.2Er0.2Y0.2Gd0.2)PO4: A novel environmental barrier coating candidate	89
Tailorable shielded compliance of thermal barrier coatings through laser texturing and microstructural modification: microfeature design and validation	86
Exploring point defects and trap states in undoped SrTiO3 single crystals	85
Tailoring the catalytic activity of PrBaFe2O5+δ cathode material with non-transition metal In-doping for solid oxide fuel cells	83
Tailoring the tetragonal distortion to obtain high Curie temperature and large piezoelectric properties in BiFeO3-PbTiO3-BaTiO3 solid solutions	82
Achieving synergy of load-carrying capability and damage tolerance in a ZrB2-SiC composite reinforced through discontinuous carbon fiber	80
Enhanced high-temperature oxidation resistance of HfSi2-modified silicon based multilayer ceramic coating on Nb alloy prepared by a novel strategy	80
Effects of frequency on the AC flash sintering behavior and microstructure of Ga-LLZO	78
Corrosion resistance of calcium zirconate crucible to titanium-copper melts	78

Microstructure evolution of in-situ SiC-HfB2-Si ternary coating and its corrosion behaviors at ultra-high temperatures	75
High-performance SiO2-Sr3(PO4)2 low-ε dielectric ceramics for MW/THz applications	75
Editorial Board	74
Surface selective oxidation of C/C composites by ultrafast high-temperature shock for enhancing interfacial bonding with metal	74
Corrosion resistance and microstructural evolution of Yb-Al-Si-O glass-ceramics under molten Ca-Mg-Al-Si environment at 1350 °C	73
Editorial Board	73
Novel TaC0.8 incorporated WC composites with enhanced mechanical properties by spark plasma sintering	72
Sonochemically activated solid-state synthesis of BaTiO3 powders	70
The synergistic role of hierarchical preferential oxidation in the enhanced ablation performance of multi-phase multicomponent ultra-high temperature ceramics	69
Enhanced electrocaloric effect of barium titanate-based ceramic thick films through regulating the internal stress and multilayered structure	68
The self-lubrication property of single-phase high-entropy carbide ceramic under tribo-induced effect	67
High polarization enhanced photoluminescence and Faraday rotation within Co: ZnAl2O4 NCs embedded transparent ceramics	66
Alumina precipitate along dislocations in rutile single crystal of diffusion couple during cooling from 1200° to 1400°C	66
Thermoelectric properties of A-site deficient reduced Sr0.775La0.15-xEuxTiO3-δ (0 ≤ x ≤ 0.15)	65
Enhanced thermal shock resistance of SiCf/SiC composites with Y-Al-Si-O glass ceramic environmental barrier coatings in water-oxygen conditions at 1350°C	65
Li3V2(PO4)3 sintering atmosphere optimisation for its integration in all-solid-state batteries	65
Editorial Board	64
HT-CMC10 Special issue editorial	64
Processing and microstructure development of reactive sintered (Ti-Zr-Nb-Hf-Ta)B2 + (Ti-Zr-Nb-Hf-Ta)C high-entropy ceramics	64
Microstructure tailoring of red-emitting AlN-CaAlSiN3:Eu2+ composite phosphor ceramics with higher optical properties for laser lighting	64
Material removal and damage formation mechanisms induced by periodic indentation during ultrasonic vibration-assisted scratching of SiCf/SiC composites	64
Grain-orientation-engineered multilayer NaSr2Nb5O15 ferroelectric ceramics via templated grain growth	63
Grain-size effect on Cr3+ and F-centres photoluminescence in nanophase MgAl2O4 ceramics	63
Evolution of the structure and chemical composition of the interface between multi-component silicate glasses and yttria-stabilized zirconia after 40,000 h exposure in air at 800 °C	63
Microstructural development of MnCO3 microsphere compacts through hydrothermal hot-pressing	62
Effect of grain size and orientation degree on thermal shock resistance of BN-matrix textured ceramics under cyclic thermal shock	62
Water-enhanced plasticity of calcium fluoride	62
Fabrication of novel (1-x)YMnO3-xCaCeNbWO8 composite ceramics with highly linear behavior for wide temperature range NTC thermistors	61
Effects of high-energy ball milling and reactive spark plasma sintering on the densification, microstructure, and mechanical properties of ultra-fine and X-ray pure ZrB2-SiC composites	60
Enhanced performance and durability of lanthanum strontium cobalt ferrite by in-situ solvothermal modification	59
Fabrication of Ruby by 3D printing of transparent salt solutions	59
Editorial Board	59
Elevated temperature tensile and bending strength of ultra-high temperature ceramic matrix composites obtained by different processes	59
Atomic layer deposition and characterization of Bi1Se1 thin films	57
CerAMfacturing of silicon nitride by using lithography-based ceramic vat photopolymerization (CerAM VPP)	57
First principles calculations and synthesis of multi-phase (HfTiWZr)B2 high entropy diboride ceramics: Microstructural, mechanical and thermal characterization	56
Preparation and optical properties of highly transparent MgAl1.9Ga0.1O4 ceramics via aqueous gel-casting method	56
Temperature dependence of carbon contamination in spark plasma sintered Y2O3	56
Cyclic ablation behavior of mullite-modified C/C-HfC-SiC composites under an oxyacetylene flame at about 2400 °C	56
Effects of starting powder on microstructure and thermal conductivity of pressureless-sintered fully ceramic microencapsulated fuels	55
Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties	55
Negative thermal quenching CsPbBr3 glass-ceramic based on intrinsic radiation and vacancy defect co-induced dual-emission	55
Intense radioluminescence from transparent CsGd2F7: Ce3+ nano-glass scintillator	54
Oxygen nonstoichiometry and electrical transport properties of Pr1-Ca MnO3 ceramics	54
Crack healing mechanisms in atmospheric plasma sprayed Yb-silicate coatings during post-process heat treatment	54
Mechanical properties of cold sintered ZnO investigated by nanoindentation and micro-pillar testing	54
Improved ageing-resistance and fracture toughness of zirconia-toughened alumina bioceramics via composition and microstructure design	54
Textured CaBi4Ti4O15 ceramics with large piezoelectricity, excellent thermal stability and high resistivity	54
Suppressing the phase-transition-induced cracking of SiO2 TGOs by lattice solid solution	53
Microwave dielectric properties of ultra-low temperature sintered Co1−xMgxMoO4 (x = 0–0.09) ceramics for 5G array antenna applications at millimeter-wave frequency	53

A review of surface topographical modification strategies of 3Y-TZP: Effect in the physicochemical properties, microstructure, mechanical reliability, and biological response	53
A novel four-mode luminescent thermometry by employing cross-relaxation of upconversion fluorescence in Er3+-doped MgAlON transparent ceramics grain boundary	53
Effect of second phase addition of zirconia on the mechanical response of textured alumina ceramics	53
Scaling up the cold sintering process of ceramics	53
Effect of SiC on densification, microstructure and mechanical properties of high entropy diboride (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)B2	53
High temperature oxides for selective absorption of thermal radiation	52
Wetting of FeCoCrNiTi0.2 high entropy alloy on the (HfZrTiTaNb)C high entropy ceramic	52
High-temperature oxidation kinetics of a metastable dual-phase diboride and a high-entropy diboride	52
Reversible evolution of ferroelectric-antiferroelectric phase transition in lanthanum-modified NaNbO3-based ceramics	51
Fracture mode transition from intergranular to transgranular in (TiZrNbTaCr)C: The grain boundary purification effect of Cr carbide	50
Rare-earth zirconate high-entropy nanofibrous porous ceramics for high-temperature thermal insulation applications	50
Hard and tough ultrafine-grained B4C-cBN composites prepared by high-pressure sintering	50
Plasma sprayed TBCs with controlled intra-splat spherical pores and enhanced blocking of radiative heat transfer	50
Advances in 3D printing of structural and functional ceramics: Technologies, properties, and applications	50
Densification mechanism of ZnO ceramics prepared by cold sintering with molten zinc acetate dihydrate as the transient liquid medium	50
Experimental study and DFT calculations of improved giant dielectric properties of Ni2+/Ta5+ co-doped TiO2 by engineering defects and internal interfaces	49
Single-phase formation and mechanical properties of (TiZrNbTaMo)C high-entropy ceramics: First-principles prediction and experimental study	49
Bioactivity and biodegradability of high temperature sintered 58S ceramics	49
Liquid phase sintering of yttrium oxide: The effect of Al2O3 and SiO2 additives	49
Pb(In1/2Nb1/2)O3-PbZrO3-PbTiO3 ternary ceramics with temperature-insensitive and superior piezoelectric property	49
Up-scaling and processing related characterisation of hydrogen permeation membranes based on pristine and Mo substituted La28−xW4+xO54+1.5x	49
AlN with high strength and high thermal conductivity based on an MCAS-Y2O3-YSZ multi-additive system	48
Influence of novel carbon sources on microstructure and properties of (Ti0.2Zr0.2Hf0.2Ta0.2Nb0.2)C high-entropy carbide ceramic	48
Application of mullite-zeolite-alumina microfiltration membranes coated by SiO2 nanoparticles for separation of oil-in-water emulsions	48
A new BaB2O4 microwave dielectric ceramic for LTCC application	48
Exploring B-site high-entropy configuration of spinel oxides for improved cathode performance in solid oxide fuel cells	48
Anorthite-based transparent glass-ceramic glaze for ceramic tiles: Preparation and crystallization mechanism	48
Editorial Board	47
Investigation the effect of FeNiCoCrMo HEA addition on properties of B4C ceramic prepared by spark plasma sintering	47
Suppression of high-temperature dielectric loss by designed thermal annealing treatment in (Bi1/2Na1/2)TiO3 ceramics	47
Influence of graphite on the low-frequency fatigue behavior of zirconium diboride ceramics	47
Low electric field induced large electromechanical properties of BiFeO3-BaTiO3-based ceramics via phase composition modulation	47
Environmental barrier coatings on enhanced roughness SiC: Effect of plasma spraying conditions on properties and performance	47
Editorial Board	47
Fabrication of TiC coated short carbon fiber reinforced Ti3SiC2 composites: Process, microstructure and mechanical properties	47
Microstructure and mechanical properties of C/C composites modified by single-source precursor derived ceramics	46
Influence of the PuO2 content on the sintering behaviour of UO2-PuO2 freeze-granulated powders under reducing conditions	46
BaAl2Si2O8 polymorphs and a novel reversible transition of BaAlF5 in supercooled oxyfluoride aluminosilicate liquids	46
Editorial Board	45
MOX fuel sintering under oxidizing conditions: A comprehensive study of the solarisation phenomenon	45
Distribution distortion in the statistical analysis of strength data when using multiple specimen batches	45
Effects of group-VB transition metals diborides substitution on HfB2-based ceramics	45
Editorial Board	45
Impact damage resistance and tolerance of alumina-based oxide/oxide ceramic matrix composite upon one sided thermal shock and hold	44
Influence of laser surface texturing on the flexural strength of Al2O3 and Si3N4	44
Effects of addition of chromium and/or nickel oxides on the electrical characteristics of yttrium oxide-doped high-voltage zinc oxide varistors	44
Dry tribological behavior of 0/90° continuous carbon fiber reinforced ZrB2 based UHTC-material	44
Spatial curing growth mechanism and defect control of alumina green bodies manufactured by stereo-lithography	43
Corrosion behaviour of MgO-based refractories by different existence states of manganese-containing volatile phases	43
Spark plasma sintering of WC-Ti powder mixtures and properties of obtained composites	43
Direct welding of diffuse alumina ceramics by ultrashort pulse laser	43
Effect of Zn/B molar ratio on the structure, crystallization mechanism and properties of ZnO-B2O3-SiO2 glasses for LTCC applications	43
Microcrack healing in zirconia ceramics under a DC electric field/current	43
Can the ferroelectric soft mode trigger an antiferromagnetic phase transition?	43
Enhancing electrical properties of SiHfBCN ceramics through Cu-catalyzed polymer-derived ceramic synthesis	43
A novel vinyl-bridged graphene oxide/polycarbosilane precursor for harsh environment-resistant ceramic temperature sensor	43
Low-temperature synthesis of K0.5Na0.5NbO3 ceramics in a wide temperature window via cold-sintering assisted sintering method and enhanced electrical properties	43
An investigation into RESZ (RE = Yb, Er, Gd, Sm) materials for CMAS resistance in thermal barrier coatings	43
Effect of particle size on rheology, curing kinetics, and corresponding mechanical and thermal properties of aluminum nitride (AlN) ceramic by digital light processing (DLP)-based vat photopolymerizat	42
Rational design of a novel mullite aerogel with extremely high mechanical strength and anti-oxidation behavior for advanced thermal protection in extreme environments	42
Assessment of humidity self-regulation functionality for ceramic tiles	42
A low-temperature prepared composite coating to protect SiC-coated C/C composites against oxidation in a wide temperature range for long-life service	42
Multidisciplinary approach for investigating the hot corrosion behavior of thermal barrier coatings	41
Three-dimensional PDC-SiBCN network in MA-SiBCN ceramics: Toughening-reinforcing effect and oxidation barrier	41
Stereolithography and gelcasting of Li2TiO3 block breeders with a Gyroid structure: Slurry optimization and performance evaluation	41
A study on the control of the printing accuracy in alumina parts by ceramic stereolithography	41
Additive manufacturing of lead-free KNN by binder jetting	41
Microstructure and thermophysical properties of bixbyite-structured high-entropy oxides with nine-principal cations	41
Defect redistribution along grain boundaries in SrTiO3 by externally applied electric fields	41
Characterisation and damage modelling of oxide/oxide composites considering temperature dependence	41
Obtaining SiC Fibers–PyC interfacial properties through push-out FEM Models	41
Composition-structure-property synergistically tailoring of Zr-Y-Ta-O oxides as candidate abradable seal coatings materials	41
Highly porous carbon-SiC composites with continuous carbon fibers for the production of radioisotopes in ISOL facilities	41
Novel SiC/C composite targets for the production of radioisotopes for nuclear applications	40
Preparation of novel (MgCoNiCuZn)O high-entropy ceramic membrane and its dye separation	40
The role of Cr addition on the processing and mechanical properties of high entropy carbides	40
Piezoelectric voltage constant and sensitivity enhancements through phase boundary structure control of lead-free (K,Na)NbO3-based ceramics	40
Microstructure, high-temperature mechanical and dielectric properties of novel Si3N4 f/SiNO wave-transparent composites	40
A study on the thermal conductivity of proton irradiated CVD-SiC and sintered SiC, measured using a modified laser flash method with multi-step machining	40
Synthesis of new rare earth containing ternary laminar Sc2PbC ceramic	40

Effect of oxidation on the bending fatigue behavior of an advanced SiC/SiC CMC component at 1000 °C in air	40
Influence of polyurethane skeleton on structural and superconducting properties of Y-123 foams	40
Benchmark polynomials for the porosity dependence of elastic moduli and conductivity of partially sintered ceramics	40
YB2C2: The first damage tolerant ceramic with melting point over 2500 oC	40
Defect-induced superior piezoelectric response in perovskite KNbO3	40
Tribological performance of binderless tungsten carbide reinforced by multilayer graphene and SiC whisker	39
Low-temperature diffusion bonding of Ti3Si(Al)C2 ceramic with Au interlayer	39
Molecular design for thermally stable SiZrBOC structure from single source precursor with high ceramic yield	39
Aqueous tape casting of lithium metazirconate (Li2ZrO3) thin sheets	39
Optimisation of two-step sintering parameters to produce bioactive and dense zirconia-hydroxyapatite composite ceramics	39
WITHDRAWN: Porous Si3N4 ceramics with uniform microstructure fabricated by in-situ pre-gel casting combined with non-directional freeze-drying	39
Direct ink writing of 3D piezoelectric ceramics with complex unsupported structures	39
Reducing dielectric loss in Na0.5Bi0.5TiO3 based high temperature capacitor material	39
Application of the pack cementation process on SiC/SiC ceramic matrix composites	39
Dual plate-like grains of (Ti, Zr)B2 and W2B5 toughened solid solution composites fabricated via in-situ reaction spark plasma sintering of (Ti, W)C and ZrB2 powders	39
Oxidation and creep behavior of textured Ti2AlC and Ti3AlC2	39
Heat dissipation in 3D printed cellular aluminum nitride structures	38
High-speed deposition of silicon nitride thick films via halide laser chemical vapor deposition	38
Thermal stability of CVI and MI SiC/SiC composites with Hi-Nicalon™-S fibers	38
Effects of sintering additives on dielectric breakdown strength of sintered reaction-bonded silicon nitride	38
Ba0.95La0.05Fe0.8Ni0.2O3−δ perovskite as efficient cathode electrocatalysts for proton-conducting solid oxide fuel cells	38
Phase composition, microstructure, and mechanical properties of polymer-derived SiOC glass-ceramics reinforced by WC particles	37
Impact of recently discovered sodium calcium silicate solutions on the phase diagrams of relevance for glass-ceramics in the Na2O-CaO-SiO2 system	37
An interface nucleation rate limited sintering kinetic model applied to in situ sintering Al2O3-SmAlO3 composites	37
Experimental and theoretical study on air reaction wetting and brazing of Si3N4 ceramic by Ag-CuO filler metal: Performance and interfacial behavior	37
Improvement of mechanical properties of ceramic green body and fired body by aging of inorganic binder in ceramic slurry for 3D printing	37
Precise residual stress profile in ion-exchanged silicate glass by modified contour method	37
Enhanced properties of tailored MoAlB ceramics by hot forging	37
Gelcasting and sintering of hydroxyapatite materials: Effect of particle size and Ca/P ratio on microstructural, mechanical and biological properties	36
Investigation of interfacial reaction mechanism between SiC and Inconel 625 superalloy using thermodynamic calculation	36
Synthesis of two new o-MAX phases Mo2VAlC2 and Mo2V2AlC3 and their derivatives o-MXene Mo2VC2Tx and Mo2V2C3Tx	36
Enhancements of thermoelectric performance in n-type Bi2Te3-based nanocomposites through incorporating 2D Mxenes	36
Oxidation behavior of high-entropy (Zr0.2Hf0.2Ta0.2Nb0.2Ti0.2)B2 ceramic with 20% SiC addition	36
Synthesis, characterization and in-vitro biocompatibility of electrophoretic deposited europium-doped calcium silicate on titanium substrate	36
Phase stability and energy storage properties of polycrystalline antiferroelectric BaTiO3-substituted NaNbO3 thin films	36
Effect of SiO2/AlOOH double-coated SiC powders on the properties of SiC ceramics by vat photopolymerization	36
The surface carboxyl group of carbonaceous microspheres effects on the synthesis and structure of SiOC ceramics	36
Additive manufacturing of high-quality tritium breeding pebbles using ceramic precursors	36
Preparation of ZrP2O7-CePO4 composite porous ceramics and their excellent thermal insulation and wave-transmission performance for supersonic aircraft	36
Rapidly synthesizing Hf2SB ceramics by thermal explosion	36
Nano-to-microscale ductile-to-brittle transitions for edge cracking suppression in single-diamond grinding of lithium metasilicate/disilicate glass-ceramics	36
Particle migration in large cross-section ceramic on-demand extrusion components	36
Synthesis and enhanced mechanical properties of compositionally complex MAX phases	36
Computational characterisation of microwave heating of fibre preforms for CVI of SiCf/SiC composites	36
Pressureless consolidation of boron nitride fiber ceramics via a chemical bonding approach	35
Crystallization in the TeO2 - Ta2O5 - Bi2O3 system: From glass to anti-glass to transparent ceramic	35
Three-dimensional preforming via wet-laid nonwoven technology for ceramic matrix composites	35
Dielectric properties with high dielectric permittivity and low loss tangent and nonlinear electrical response of sol-gel synthesized Na1/2Sm1/2Cu3Ti4O12 perovskite ceramic	35
Ameliorative energy-storage properties stemmed from the refined grains in PBLZS antiferroelectric ceramics via introducing liquid phase sintering	35
Tailored macro-pores during the formation of C/C-SiC via liquid phase pyrolysis	35
Oxidation resistance, residual strength, and microstructural evolution in Al2O3-MgO–C refractory composites with YAG nanopowder	35
A comparison of the corrosion behaviour over time in 0.5 M NaCl environment of TiCN spark plasma sintered with and without Si aids	35
A comparative study on dielectric and mechanical properties of porous β-Si3N4 ceramics by controlling porosity and microstructure	35
Zirconium-modified hierarchical porous SiC-based nanofibrous aerogel with efficient electromagnetic waves absorption and thermal insulation properties	35
Evaluation of the effect of high-speed sintering on the mechanical and crystallographic properties of dental zirconia sintered bodies	35
Experimental studies and thermodynamic assessment of the Ba-Mo-O system by the CALPHAD method	35
Thermal-assisted cold sintering study of Al2O3 ceramics: Enabled with a soluble γ-Al2O3 intermediate phase	35
Spinel-trirutile microwave dielectric ceramics with high Q and excellent temperature stability based on MgO-Al2O3-Ta2O5 ternary systems	35
Fundamentals and practical dielectric implications of stoichiometry and chemical design in a high-performance ferroelectric oxide: BaTiO3	35
Design and fabrication of a C-band patch antenna using novel low permittivity SrGa2Si2O8 microwave dielectric ceramic	34
Rattling effects on microwave dielectric properties of Ca3TiBGe3O12 (B = Mg, Zn) garnets	34
Comparison of corrosion behaviors and wettability of CMAS on Ta2O5-Y2O3 co-stabilized ZrO2 and YSZ thermal barrier coatings	34
Compositional pathways and anisotropic thermal expansion of high-entropy transition metal diborides	34
Direct tape casting of Al2O3/AlN slurry for AlON transparent ceramic wafers via one-step reaction sintering	34
Effect of bimodal microstructure on high-temperature properties of nano-reinforced Al2O3–MgO–C refractories	34
Ablation behavior of a C/C-ZrC-SiC composite based on high-solid-loading slurry impregnation under oxyacetylene torch	34
Effects of in-situ carbon layer and volume fraction of SiC fiber on the mechanical properties and fracture behaviors of SiCf/SiC composites fabricated by a modified PIP method	34
Ultrafast high-temperature sintering of potassium-sodium niobate: Processing and properties	34
Improvement in the properties of low carbon MgO-C refractories through the addition of graphite-SiC micro-composite	34
Study on the coupling effect of chemical color and structural color for Lushan speckle porcelain glaze in the Tang Dynasty (618–907A.D.)	34
Low temperature and pressureless synthesis of high-purity Ti3SiC2 MAX phase from TiC via κ-Al2O3 addition through reactive melt infiltration	34
Direct ink writing of porous SiC ceramics with geopolymer as binder	34
Nonstoichiometric microwave dielectric ceramics [(Na0.5-xBi0.5+x/3)0.5Ca0.5]MoO4 with low sintering temperatures	34
Effect of Ba addition on the dielectric properties and microstructure of (Ca0.6Sr0.4)ZrO3	34
Controlling the shape of hexagonal structure by growth condition improves the thermoelectric properties of p-type Bi-Te films	34
WSi2 modified HfB2-SiC coating: Microstructure and ablation resistance	34
High-voltage arc erosion behavior and mechanism of Ti3AlC2 under different ambient atmospheres	34
Structural features and thermal expansion of zinc aluminosilicate quartz solid solutions	33
Tuning the electrical conductivity and Maxwell-Wagner relaxation in BiFeO3–BaTiO3 piezoceramics	33
Electrocaloric effect at special points in the composition-temperature-electric field phase diagram of barium zirconate-titanate (BZT)	33
Controlling thickness to tune performance of high-mobility transparent conducting films deposited from Ga-doped ZnO ceramic target	33
A novel route to fabricate Yb:YAG ceramic fiber and its optical performance	33
Reaction sintering of dense gadolinium-iron garnet (GdIG) material	33
High-precision direct ink writing of Li6.4La3Zr1.4Ta0.6O12	33
Orientation-dependent, field-induced phase transitions in soft lead zirconate titanate piezoceramics	33
Enhancing energy storage density of BNT-ST-based ceramics by a stepwise optimization strategy on the breakdown strength	33
Extremely high corrosion resistance of Zn Ni1–Cr2O4 spinel as sidewalls in the aluminum electrolyte	33
Effect of different donor dopants on the seed-free solid-state crystal growth of potassium sodium niobate	33
Fabrication of highly transparent yttria by DLP-based additive manufacturing	33
Co-fired lead-free piezoceramic multilayer actuators with ultrahigh electro-strain and remarkable comprehensive properties	33
Composition-dependent electrical property of (1-x)Sr0.75Ba0.25Nb2O6-xPbZr0.52Ti0.48O3 solid solution ceramics	33
Improvement of ablation resistance of CVD-HfC/SiC coating on hemisphere shaped C/C composites by introducing diffusion interface	33
Stress-dependent sintering behavior of porous thermal barrier coatings	33
Alumina nanocrystalline ceramic by centrifugal casting	33
Infiltration effect of Mg with different matter states in the reaction of MgB2 bulks	33