Journal of Materials Science-Materials in Electronics

Papers
(The TQCC of Journal of Materials Science-Materials in Electronics is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)
ArticleCitations
The effect of different metal pad sizes on shear stress in solder ball bonding242
Evaluation of Sb3+-doped Cs2HfCl6 crystalline scintillators synthesized via solution processing94
Structural, optical, and resistive switching behavior in SnO2 and Schiff-based SnO2 nanoparticles74
Retraction Note to: An investigation on the properties of SnO2 nanoparticles synthesized using two different methods67
Fine-tuning piezoelectric potential enhances self-powered quartz/ZnO microsystem for photocatalytic H2O2 production64
Electrical properties of carbon-based fully-printed mesoscopic perovskite solar cells with BAI as an additive63
Correction: ZnGa2O4 polycrystalline thin-film preparation using hydrothermally synthesized nanoparticles62
High-quality CsPbBr3 films prepared by introducing methylammonium iodide into PbBr2 precursor for efficient perovskite solar cells58
Fabrication of poly(3-methylthiophene)/poly(ethylene oxide)/ruthenium oxide composite electrospun nanofibers for supercapacitor application56
Fabrication of tandem BaTiO3/CdS/Si photodetector by pulsed laser deposition53
Self-powered photosensing and biosensing using hydrothermally grown CdS nanorods51
Effects of rare earth dopants on the EO properties and domain configurations in PMN-PT transparent ceramics48
Effect of annealing treatment on oxalic acid-assisted electrodeposited CdS thin films for enhanced solar cell performance48
Synthesis and characterization of Ag-doped ZnO by one-step microwave-assisted hydrothermal methods48
Effect of additive particle size on degradation behavior of ZnO varistors under high current surges46
Effects of Al2O3 coating on electrochemical performance of MCMB material and LiNi0.5Mn1.5O4/MCMB full cells46
Dysprosium ion effect on the structural, optical, and dielectric characteristics of epoxy resin polymer composite panels for use as a transducer material45
Synthesis and efficient multicolor luminescence property of single-phase Eu3+ and Tb3+-doped Gd2(MoO4)345
Free-standing graphene@carbon hollow sphere confining high-loading sulfur cathode for high-performance lithium–sulfur batteries45
Effect of indium substitution on antiperovskite superconductor ZnNNi344
Effects of In2O3 and Ta2O5 co-doping on microstructure and electrical properties of ZnO low-voltage varistor44
Comments on the paper “Effect of Sr substitution on the structural properties of LaCrO3 perovskite” by R. Kumar, K. Dev Singh, and R. Kumar, and published in J. Mater. Sci.: Mater. Electron. 33, 1203944
The enhanced photocatalytic performance of Co3O4 nanoparticles/In2O3 nanotubes pn junction via dual MOFs template auxiliary44
Synthesis and investigating of the impact of the barium substitution on the structural, magnetic, magnetocaloric effect and critical properties of La0.7Ba0.3−xMn0.95Fe0.05O3 (x = 0 and 0.06)44
Impact of Ni and P substitution for B on the structure and soft magnetic properties of FeBPCuNb amorphous/nanocrystalline alloy43
Investigation of frequency-dependent dielectric properties of ZnO nanorods grown on Si wafer: In/ZnO/p-Si heterostructure42
Low temperature photoluminescence study of AlxGa1−xN/GaN/AlxGa1−xN heterostructure nanocolumns41
Mo2C–C quasi-sphere architecture for the flexible sensor in the movement monitor41
Compositionally tunable high temperature Mn-doped BiFeO3–BaTiO3 lead-free piezoceramics40
Investigation of the mechanical, thermal and dielectric properties of electrical corrosion resistance glass reinforced polyimide-based composite produced by spark plasma sintering40
Correction: Effect of cobalt nanoparticles on mechanical properties of Sn–58Bi solder joint39
Study on electrical, thermal, mechanical and corrosion resistance properties of conductive silicone rubber for polymer-based metal composite grounding electrodes39
Ho doping-induced ferroelectric polarization enhances UV photodetector performance of YbMnO339
Analysis of Nb-doped and undoped TiO2 nanocoatings with varying dopant concentrations39
Voltage oscillations during anodizing process of aluminum and their suppression39
Obviously decreased hysteresis index originated from enhanced grain size with ETL modification for improved performance of perovskite solar cells39
Analysis of substitution of bismuth cations in CoFe2O4 nanoparticles and their influence on frequency and temperature-dependent dielectric and magnetodielectric properties38
TD-DFT and optical properties of 9,9-dioctyl-9Hfluorene-based oligomer in a thin film and design of DFB laser using ellipsometry studies37
Effects of Li2CO3 on the sintering temperature, microstructure, and electrical properties of PZT-PMnSbN relaxor ceramics37
Investigation of intrinsic charge transport via alkyl thiol molecular electronic junctions with conductive probe atomic force microscopy37
High performance of air plasma-exposed MgCo2O4 electrode material for rechargeable Mg batteries and supercapacitors36
Eco-friendly guar gum polymer electrolytes doped with lithium nitrate for energy storage devices36
Formation of a periodic structure on the surface of InP crystal during irradiation with bismuth ions36
Sn-doped three-dimensional sea urchin-like morphology of W18O49 marterials for supercapacitor36
Unwavering red emission from Eu3+ activated Li6AlGd(BO3)4 phosphors36
Optimization of structural, electrical, and magnetic properties of the solution-processed IZO MOSFET adopting spin coating technique and its performance35
Annealing and radiation effects on electrical properties of ALD-grown Al2O3 MOSCAPs: insights from C–V and G–V measurements35
Metal-free organic n-alkylamino-substituted 1,4-naphthoquinones as a photosensitizer in TiO2 and ZnO-based dye-sensitized solar cells35
2D Ruddlesden-Popper perovskite interface engineering for efficient perovskite solar cells with exceptional stability34
Corrosion characterizations of Sn–9Zn–xS in acidic and alkaline solutions34
Characterization of Sc2O3/SiO2/SiC MOS capacitors: role of annealing temperature on microstructural and electrical properties34
Role of bismuth in the mechanical and corrosion properties of Cu/Sn-3.0Ag-0.5Cu/Cu solder lap joints34
Exploring thermoelectric properties of hydrothermally synthesized Ag-doped SnS material33
Dependence of optoelectronic properties of IGZO thin films deposited by RF magnetron sputtering on initial vacuum pressure33
Magnetic properties of Bi-substituted M-type Barium hexaferrites in the region of single-phase state33
Havriliak-Negami and Bergman type of dielectric response, together with Dyre’s Hopping tunneling through random free energy barriers in (BiFeO3)0.8—(CaTiO3)0.2 distorted crystalline structure33
Effect of Co2Y doping on the structural, magnetic, and loss characteristics of Ni0.8Zn0.2Fe2O4 ferrites33
The research and synthesis of the cubic 2MnCO3@ZnO applied as cathode material for zinc ion battery32
RETRACTED ARTICLE: Combined experimental and TDDFT computational studies of the optical and electrical characteristic of luminol films-doped TiO2 with 9.027% power conversion efficiency32
Acetone sensor based on porous nickel ferrite nanoparticles32
Synthesis, characterization, and computational exploration of 6-ethoxy-2-aminobenzothiazolium diphenylacetate crystal as an efficient NLO material32
Beam scanning conformal antenna array with planar integrated phase shifter based on graphene32
Electrical relaxation and conduction behaviour in SmFeO3 modified PbZrTiO3 ceramics32
High κ and large positive τf in the low temperature sintering BaNb2V2O11 ceramics31
Facile low-temperature synthesis of a hierarchical Sn-SnO2/CNT/rGO composite for anode material in lithium-ion batteries31
Effect of Nb content on Sm2Fe17−xNbx and its nitrides prepared by reduction-diffusion method31
Modified electrode by using magnetic core–shell Fe3O4@SiO2/MWCNT nanoparticles for determination of 6-mercaptopurine31
Electrodeposition of nanostructured cuprous oxide on various substrates and their electrochemical and photoelectrochemical properties31
Improvement of multiferroic properties of the Bi5Ti3FeO15 thin films by Ni doping31
Synthesis of polydiphenylamine nanostructures via microwave and ultra-sonication method for supercapacitor performance30
Design and fabrication of BaSnO3/RGO as efficient Pt-free counter electrode for dye-sensitized solar cells30
Enhanced multiferroic properties and magnetoelectric coupling in Nd modified 0.7BiFeO3–0.3PbTiO3 solid solution30
Investigations of cadmium ion-doped L-histidine hydrochloride crystal growth, vibration, optical, thermal, SHG, and MTT assays for biological and optoelectronic applications30
Studies of phase transitions, Raman spectra and microwave dielectric properties of perovskite-structured (Na1−xLix)0.5Nd0.5TiO3 ceramics30
Cu/Ni-loaded oxygen vacancy-rich CeO2 rod derived from metal organic framework for efficient photothermal CO2 hydrogenation30
Lead‐free halide perovskites for optoelectronic application: investigation of morphological, optical and electrical conductivity30
Correction: Exploring the potential of non‑metal (phosphorus)‑doped metal oxide (NiCo2O4) nanoparticles synthesized in various solvents for high‑performance supercapacitors30
An improved sensing process of ultra low concentration of nitrite anions using pre-etched silicon decorated with copper nanowires30
Microstructure and magnetic properties of Gd3+ doped Zn-Cu-Co nano ferrites29
Superior energy-delay-production in nanoscale field effect diode by embedded doped pockets for digital applications29
Study on optical and mechanical properties of SiC single-crystal substrate at high temperature29
Direct flip-chip bonding of bare dies to polypropylene-coated paper substrates without adhesives or solders29
Divalent copper ions-doped strontium magnesium phosphate nanopowder: synthesis and characterization29
The effect of metal electrodes and deposition angle on linearity of sculptured TiO2 humidity microsensors29
Impact of grain size on the thermoluminescence properties of La2O3-doped boro-phosphate glasses29
Multi-layer radar absorber design with ALD-coated fabrics29
Nanosized LaAl(1-x)FexO3 oxides: characterization, optical and sono-photocatalytic applications28
Synthesis of white emitting Dy-doped Ga₂O₃ phosphors via hydrothermal method28
Exploring the photocatalytic and dielectric characteristics of rare earth-doped (Na0.5Bi0.5)0.94 RE 0.04Ti0.95 (Ni0.2Fe0.2 Sb0.6)0.05 O3 (RE = La, Nd, Gd, Y; NBT-RENFS) ceramics28
Immobilized Mo:TiO2 nanoparticles for humic acid removal in an aqueous medium using solar spectrum28
Investigation of metal/V2O5 nanorod Ohmic contacts28
Influence of calcium substitution on the structural, thermal, and electrical properties of PbTiO₃ perovskite28
Electrospinning preparation of ErFe0.95Co0.05O3 nanofibers for dual-band laser absorption28
Pulsed laser-assisted solid-state annealing method synthesised Au@S,O-GCN photocatalyst for efficient photocatalytic degradation of rose bengal dye28
Enhanced electromagnetic properties and corrosion resistance of flaky FeSiCr alloy powder by thermal oxidation surface modification28
High-efficiency weak-field magnetoelectric energy harvesting utilizing thickness-optimized Metglas/PZT/Metglas composites28
Defect and band gap engineering in Mg-doped ZnO for gas sensing and photocatalytic applications28
The structural, optical, and electrical properties of thermal evaporation-deposited V2OX films for use in silicon heterojunction solar cells28
Zinc oxide thin films deposited by sol–gel spin-coating technique for propane and carbon monoxide sensing applications27
Influence of nitrogen annealing on dielectric, electrical, and magnetic properties of 0.94(Bi0.5Na0.5)TiO3-0.06BaTiO3/Co0.65Zn0.35Fe2O4 composites27
Preparation and electromagnetic shielding performances of graphene/TPU–PVDF nanocomposites by high-energy ball milling27
Influence of B-site zr ion substitution on the structural, dielectric and ferroelectric properties in Bi0.5Na0.5TiO3-based lead-free ceramics27
Physical characterization of Ge–Zn–Se thin films27
Synthesis of Ag@TiO2/NiFe2O4 ternary nanostructures and evaluation of their photocatalytic activities27
Synthesis of hierarchical SnS2@SnO2 heterojunction on carbon-fiber cloth for efficient removal of Cr(VI) ions from aqueous solution27
On the wide range frequency and voltage dependence of electrical features and density of surface states of the Al/(Cu:DLC)/p-Si/Au Schottky diodes (SDs)27
Microstructural, Mössbauer, thermal and dielectric studies of ZnFeCoO4 spinel oxide for optoelectronic applications27
Enhanced current sensitivity of AlGaN/GaN pH sensor by combining recessed-gate and increasing the ratio of W/L27
Reactive sputtering deposition of Co3O4 films and an evaluation of its use as an electrochemical sensor for ascorbic acid27
Simultaneously achieved high energy density and efficiency in (1−x)BaZr0.2Ti0.8O3−xBi0.5Na0.5TiO3 thin films with good stability via amorphous-structure engineering27
New photocatalysts stimulated by visible light for organic-waste remediation: (La/Ce) and (La/Gd) codoped BiFeO327
The role of cordierite nano filler on the electrical, mechanical, thermal, and chemical properties of liquid silicone rubber used in composite insulators27
Investigation of photosensitive and photodetector characteristics of n-TPA-IFA/p-Si heterojunction structure27
Sustainable bio-derived organic thin film photodetector with broadband self-powered response26
Color tuneability behaviour and energy transfer analysis on Dy3+-Eu3+ co-doped glasses for NUV-WLEDs application26
Insights into the structural and optical characteristics of the erbium oxide-doped PVDF membranes26
Effect of one-dimensional tetra-needle-like ZnO whiskers on the electrical properties of montmorillonite/silicon carbide/epoxy micro-nanocomposites26
Green synthesis of nickel oxide nanoparticles using Lilium pensylvanicum extract for electrochemical detection of hazardous carbon monoxide gas26
Effect of trace Ge on interfacial reaction and shear strength of Sn-0.7Cu solder joints during isothermal aging and thermal cycling26
Microstructure and dielectric properties of (Ba, Sr)TiO3 ceramics with alkali-free glasses26
Improved magnetic and dielectric properties for NiZn ferrites by using cold sintering-assisted process26
Electrochemical investigation of Fe3O4/TNT/PANI composites for enhanced supercapacitor applications26
Structural and optical properties depending on tuning of Cd:S ratio in the CdS nanocomposite via SILAR technique26
Optimization of reflow profile for copper pillar with SAC305 solder cap FCCSP26
Design and fabrication of anti-reflection coatings for its application in crystalline silicon solar cells26
Improved magnetic and electrical properties of Bi1−xCaxFeO3 multiferroic nanomaterials25
Graphene-silver nanowires hybrid electrode on PET sheet for improved-performance transparent electronics25
RETRACTED ARTICLE: Facile hydrothermal synthesis of ZnFe2O4@ZnO@RGO ternary nanocomposite photocatalysts with superior photocatalytic activity25
MOF derived CoFe-layered double hydroxide nanosheets for a high-performance hybrid supercapacitor25
Prediction of the lithium storage capacity of hollow carbon nano-spheres based on their size and morphology25
Structure and sintering characteristics of rapid synthesizing BCZT powders by microwave assisted sol–gel-hydrothermal method at low temperature25
Reaction sintering and mechanism of microwave dielectric ceramic with K2NiF4 structure and perovskite structure25
Experimental investigation of laser annealing effects on the optoelectronic performance of ITO/Ag/ITO electrodes prepared by sputtering25
Electrical properties of high-entropy oxides (La0.2Ba0.2Cu0.2Sn0.2Ni0.2)3O425
Effect of Zn and Sn incorporation on the crystallinity of spin-coated CuInSe2 thin films25
Effects of buried sintering on the microstructure and dielectric properties of Sr-doped Bi2/3Cu3Ti4O12 ceramics25
Hexamethylenedimine functionalized graphene oxide: a promising and supporting carbonaceous electrode material in supercapacitor25
Improvements in structural and optical properties of nonpolar a-plane AlGaN epilayers with nanoscale island-like SiNx interlayer25
Improved energy storage properties of Bi(Mg2/3Nb1/3)O3-modified 0.8Bi0.5Na0.5TiO3–0.2SrTiO3 ceramics25
Crotalaria juncea plant seed-derived biochar: electrode to prototype solid-state supercapacitor25
A synergetic impact of Zn/Mg co-substitution on enhancement physical properties of CuFe2O4 spinel ferrites25
Heterojunction CdS/CuO/ZnO branched nanowire photoelectrodes for efficient photoelectrochemical water splitting25
Influence of Ti4+ substitution on the structural, magnetic, and dielectric properties of Ni-Cu–Zn ferrite24
Study on copper interconnection structure of flexible electronics by Ag-PT composite membrane induced electrodeposition24
High resistivity and low dielectric loss of LuFe1−xOsxO3 (x = 0.0–0.10) ferrites24
Efficiency enhancement and chrono-photoelectron generation in dye-sensitized solar cells based on spin-coated TiO2 nanoparticle multilayer photoanodes and a ternary iodide gel polymer electrolyte24
Adroit low-temperature synthesis and origin of blue–yellow–red emission in activated La2-xDyxMgTiO6 novel perovskite phosphor for WLED24
Fabrication of Er-doped WO3 thin films as a potential candidate for the detection of ammonia at room temperature24
Energy storage performance of AgNbO3−x Bi2WO6 antiferroelectric ceramics24
The doping of SZC solders with bismuth to improve their thermal and tensile characteristics for microelectronic applications24
A novel ZIF-8 and ZIF-67 co-modified TiO2 nanospheres for highly efficient degradation of methylene blue under simulated sunlight24
Stabilization of durable tetragonal phase and barrier regions in y-123 ceramic systems with partial substitution mechanism24
Design of FeCoSiBPCu nanocrystalline alloys with high Bs and tunable soft magnetic properties24
Studies on optical properties, thermal stability and electrical conductivity of copper alumina nanoparticles-reinforced Poly(pyrrole-co-indole) for optoelectronic devices24
Enhancing optical thermometric sensitivity through controlling particle size in LaNbO4: Yb3+, Tm3+ up-converting luminescent nanoparticles24
Improved transparency and conferred luminescence property via Er3+/Ho3+ co-doped in KNN-based ceramics24
Influence of field-induced anisotropy on magnetic properties and domain structure of Fe-based nanocrystalline alloy via a new continuous magnetic field annealing furnace23
Tailoring the structural, conductivity, and magnetic properties of La2Ni1−xCrxMnO6 double perovskites by B-site Cr substitution23
Excellent microwave-absorbing performance in nanofiber nanocomposites by biomass conversion of sodium alginate23
Effect of mutual modification by BaO and BaF2 on the structure and properties of BaO–BaF2–B2O3 glasses23
Preparation and performance of rose stalk-like niobium nitride nanofibers for supercapacitor23
Pompon-like Bi2WO6 hierarchical nanostructures: preparation and their application in photodegradation of norfloxacin and difloxacin hydrochloride23
Hybrid ML model of quantum-embedded Bi-LSTM classifier for the prediction of stable spinel oxides23
Synthesis of (MgCoNiCuZn)O high-entropy oxide composites by microwave heating23
Photoelectrochemical characterization of the hetero-junction Ag/CuBi2O4 application under visible light irradiation23
Featuring of Formamidinium lead halide and enrichment of optoelectronic behaviour of SnO2/FAPbI3/NiOx with PCBM layer23
Thermal, mechanical and topological studies on single crystal of propyl-p-hydroxybenzoate23
Solvothermal synthesis of WS2 rectangular nanoplates and their application in photothermal therapy23
Effects of Ce3+/Sm3+ co-doping as a luminescent modifier in borotellurite glasses for solid-state lighting23
MOF-derived porous NiCo2S4 nanocrystals embedded in nitrogen-doped carbon nanorods as lithium battery anodes23
Effect of deposition potential and time substitution for Co(OH)2 on controlled synthesis and electrochemical performance for electrochemical supercapacitor23
Effect of MnS/rGO nanocomposites on enhancing the removal efficiency of organic dyes and electrochemical applications23
Growth, characterizations, and thermal analysis of rhenium chalcogenides ReS2−xSex (x = 0, 1, and 2) single crystals23
NIR photoluminescence of ZnGa2O4:Cr nanoparticles synthesized by hydrothermal process23
Improved dielectric properties of rGO/PDMS composites by incorporation of Ag nanoparticles23
CNF@NiOx nanofibrous binder-free electrodes for high-energy–density supercapacitors23
Enhanced electrochemical performance of Li-rich cathode materials at high temperatures through fluorine and magnesium modification23
Novel red-emitting phosphor Na3LaW3O12: Sm3+, Eu3+: synthesis, luminescent properties, anti-thermal quenching and LED packaging23
High sensitivity capacitive flexible pressure sensor based on PDMS double wrinkled microstructure23
Effect of annealing temperature on the physical properties of NiO thin films and ITO/NiO/Al Schottky diodes22
Electrical properties (AC and DC) of epoxy resin/carbon nanofiber composites: percolation models and modified general rule of mixtures22
Electrochemical performance of composite phase copper vanadate for promising electrode material for supercapacitor applications22
Additively manufactured polyethylene terephthalate-based high-gain multiband-flexible antenna for wireless mobile applications22
Near-zero energy loss and high dielectric temperature stability in a lead-free high-entropy perovskite ceramic22
Controlled loading of MnS2 on porous TiO2 nanosheets for enhanced photocatalytic hydrogen evolution22
Optimizing Ni-Zn ferrite/resin insulation layer to improve the magnetic properties of FeSi soft magnetic composites22
Structural, optical and dielectric properties of green synthesized Ag2S nanoparticles22
Interface and dielectric properties of Al/p-Si diode by organic composite interlayer for MOS22
The influence of rGO and GO nano plates on structural, optical and magnetic properties of SnFe2O4 nanocomposites synthesised by sol–gel, microwave and co-precipitation methods22
Microstructure and electromagnetic properties of low-temperature sintered NiCuZn ferrite by co-doped Bi2O3 and Co2O322
Investigation and predictive modeling of the optical behavior of chalcogenide thin film using different artificial neural network techniques22
Nitrogen-doped carbon quantum dots decorated ZnO nanorods array film for efficient UV photodetector applications22
A detailed investigation on the structural, optical, and photocatalytic properties of ZnO@ZnS core–shell nanostructures22
Sustainable synthesis of NiCo2O4 nanorods with cellulose for high energy density asymmetric supercapacitor application22
Piezoresistive flexible pressure sensor using vuggy clays as templates22
Study of high-temperature electrical conductivity and thermoelectric performance in Mg2−δSi0.35−xSn0.65Gex (δ = 0–0.04 and x = 0, 0.05) intermetallic alloys21
Ceramic-to-metal bonding using rare-earth containing Sn–Bi solder21
Interfacial microstructure, shear strength and wettability of Ni-added Sn-0.3Ag-0.7Cu/Cu solder joint21
Effect of Au-deposited ceramic nanoparticles on SAC305/Cu solder joints21
Electrochemical performance of carbon derived from cluster fig leaves for symmetric supercapacitor21
Effect of synthesis conditions on morphology, surface chemistry and electrochemical performance of nickel ferrite nanoparticles for lithium-ion battery applications21
Effect of minor Sb addition on microstructure, interfacial behavior, and mechanical properties of Sn–15Bi solder joints21
Influence of SiC content on spark plasma sintered MgB2–SiC superconductors21
Luminescent afterglow and storage behavior in Mg2+/Sr2+-doped C12A7: Tb3+ photo-stimulate phosphors21
Preparation of coal gasification fine slag-based supercapacitive carbon using hydrothermal deashing and alkali activation21
Fabrication of a TiC0.5O0.5 anode using the carbothermal method under a non-vacuum atmosphere and its application in metal titanium electrolysis21
Volatile organic compound detection performance of Borophene and PANI:β Borophene nanocomposite-based sensors21
Influence of power and duration on RF sputtering for the formation of terbium oxide passivation layers via the argon ambient21
A flexible pressure sensor based on embedded cracks and stiffness-regulating layer with high detection limits and wide test ranges21
Study of physical properties of novel perovskite FrJCl3 (J = Be, Mg) materials: DFT predictions for photovoltaic applications21
Enhanced solar cell efficiency: copper zinc tin sulfide absorber thickness and defect density analysis21
Piezoelectric and magnetoelectric evaluations on PVDF/CoFe2O4 based flexible nanogenerators for energy harvesting applications21
Research progress on negative temperature coefficient thermistors: review21
Design, structural elucidation, dielectric characterization, and Hirshfeld surface analysis of pyridin-2-ylmethanaminium iodide-18-crown-6 supramolecular cocrystals21
Enhancing the thermoelectric performance by defect structures induced in p-type polypyrrole-polyaniline nanocomposite for room-temperature thermoelectric applications21
Synthesis of prussian blue analog (Co/TCNi/HCCr) nanoparticles using a facile co-precipitation approach and evaluation of their dielectric characteristics for electronic applications21
Tailoring the optical and electrical properties of Au@Nb₂O₅ core–shell nanocomposites via laser fluence control21
Tunable capacitive resistance switching with low-power synaptic bionic potential in (1–x)Bi0.88Nd0.12FeO3–xCaBi4Ti4O15 thin films21
Fabrication and unraveling the morphological, structural, and dielectric features of PMMA-PEO-SiC–BaTiO3 promising quaternary nanocomposites for multifunctional nanoelectronics applications20
Investigation of Sm3+ ion emission in lead borophosphate glass system with varied modifiers for photonic applications20
Hydrothermal synthesis of La2O3–ZnO nanocomposites as electrode material for asymmetric supercapacitor applications20
Structure analysis, linear/nonlinear optical characteristics, dielectric parameters characterization, and gamma-ray shielding of cobalt-doped TiO2 nanoparticles20
Core–shell structure BST@HBPI nanoparticle/polyetherimide nanocomposite with excellent compatibility, thermal stability and dielectric properties20
Characterization and electrochemical performance of Mn-doped Co3O4 nanoparticles for supercapacitor applications20
Preparation and absorbing properties of ultra-light and large size hollow cubic carbon materials20
Bi0.2Sr0.7TiO3–doped Bi0.5Na0.5TiO3–based lead-free ceramics with good energy storage properties20
Effect of samarium oxide addition on the structural, thermal, and optical properties and photoluminescence of lithium borate glass20
Effects of BNT precursor prepared by molten salt method on BCZT-based lead-free piezoelectric ceramics20
Achieving high energy storage density under low electric field in modified bismuth sodium titanate ceramics20
Effect of brain-like shape polypyrrole nanomaterial on the capacitance and stability enhancements of β-Ni(OH)2 two-symmetric electrodes supercapacitor20
TiO2/ZnO-based composite thin films coated on FTO surface by screen printing method: increasing dye-sensitized solar cell performance20
Tunable morphology and high-yield synthesis of silver nanowires via ascorbic acid-citric acid mediated polyol process for flexible electronics20
Noncontact liquid–solid nanogenerators as self-powered droplet sensors20
Facile synthesis and asymmetric device fabrication of zeolite like Co-MOF as a promising electrode material with improved cyclic stability20
Effect of electric field on the microstructure and electrical properties of (In + Ta) co-doped TiO2 colossal dielectric ceramics20
Structural, elastic, microstructural, ac electrical conductivity and magnetic properties of Li–Cr–Zn ferrite ceramics20
Resistive switching behaviour in polyaniline-CNT ReRAM device20
Structural and electrical properties of mechanically alloyed ZnO nanoceramic for NTC thermistor application20
High-performance low-cost silver-coated copper paste for silicon heterojunction solar cells20
Studies on structural and optical behavior of nanoporous potassium-substituted magnesium ferrite nanomaterials, and their application as a hydroelectric cell20
Combustion-synthesized rGO@LaSrMnO3 electrode for supercapacitor application20
Hydrogen as power storage technology, polymeric and interconnect material innovations for future AI datacenter applications: a review19
PTFE/SiO2 composite ink for direct ink writing19
The effect of varying concentrations of acetic acid on the structural and optical properties of semiconductor zinc oxide (ZnO) nanoparticles synthesized via the sol–gel method19
Ultrasonic exfoliated few-layer Ti2CTx nanosheets for high specific capacitive electrode19
Defect structures in active nonlinear LiNbO3:Tb3+ single crystals with subthreshold terbium doping19
Molybdenum-doped zinc oxide: enhanced thermoelectric performances and unprecedented mechanical strengthening used for smart meters19
Photocatalytic, electrochemical performance and charge storage mechanism of WO3 synthesized by chemical co-precipitation method19
Investigation of photodetector performance based on methylammonium lead halide perovskites/reduced graphene oxide heterostructure19
Enhanced photoluminescence of InP@ZnS quantum dots induced by increasing the indium myristate-to-tris(trimethylsilyl)phosphine molecular precursors ratio19
0.11088299751282