Process Safety and Environmental Protection

Article	Citations
Untapping the coal reserves: Green desulfurization using phosphonium based ionic liquids	253
Full analysis and deep learning optimization of a sustainable and eco-friendly power plant to generate green hydrogen and electricity; A zero-carbon approach	239
Biaxially stretched high temperature proton exchange membranes deriving from carbon black doped polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene	214
Utilization of high-volume steel slag in sustainable low carbon cementitious composites for mine backfill: Synergistic mechanisms and environmental benefits	211
Challenges and solutions for rural domestic sewage treatment at the grassroots level in developing countries	206
Experimental study on thermal runaway characteristics and propagation mechanisms of large-capacity NCM batteries triggered by overheating under charging conditions	196
Experimental investigation of pressure, temperature evolution, and crack arrestor performance during full-scale CO2 pipeline fracture process	192
Fire hazard warning system in IoT environment using parameter optimized deep temporal convolutional network and long short term memory	161
Numerical study of external explosion in vented hydrogen explosions	156
Surface strengthening enabled performance enhancement of low-grade coal gangue-filled backfill cemented by alkali-activated materials	148
Monitoring and detecting coal miners' fatigue status using MPA-LSSVM in the vision of smart mine	148
Removal of selenite (Se(IV)) using ferrous sulfate, ferric sulfate, and ferrate: A comparative study of iron (Fe)-based coagulants	147
Valorization of Bambusa striata shavings into functional superparamagnetic material and its application in biodiesel production: Response surface optimization, kinetics, thermodynamics and economic as	134
A novel air quality index prediction model based on variational mode decomposition and SARIMA-GA-TCN	131
Preparation of PVDF composite membrane reinforced by conductive knitted fabric	130
Experimental study on the channeling leakage properties of compact-size casing-cement sheath-stratum assembly in deep and ultra-deep wells	130
An inherently safer design approach based on process safety time for batch chemical reaction processes	130
Inside Front Cover	128
Prediction of the minimum ignition energy of dust clouds based on heat transfer and particle reaction kinetics	122
Influence of particle size on the separation performance and flotation kinetics of foundry dust	117
Experimental study on the effect of sloping substrate on the spill fire in a well-confined ship engine room	117
Carbon prices forecasting based on the singular spectrum analysis, feature selection, and deep learning: Toward a unified view	113
A comparative study of the effect of cavity and obstacle on premixed methane–air flame evolution	112
Sulfonated reduced graphene oxide catalyzed fatty acid methyl ester production from macroalgae Dictyota dichotoma in supercritical conditions	112
An evolutionary deep learning model based on XGBoost feature selection and Gaussian data augmentation for AQI prediction	110

Removal of bisphenol A (BPA) by fermented sludge-derived granular biochar from template-like method: From batch experiment to continuous operation	109
Design of heat recovery steam generator (HRSG) and selection of gas turbine based on energy, exergy, exergoeconomic, and exergo-environmental prospects	109
Advanced oxidation of Trihalomethane (THMs) precursors and season-wise multi-pathway human carcinogenic risk assessment in Indian drinking water supplies	108
Real-Time Gas Dispersion Model Prediction on Offshore Platforms based on CNN_Transformer Model	106
High-efficiency promotion on dechlorination of polyvinyl chloride in subcritical water treatment by introducing waste concrete	105
Anion exchange resin/quartz sand bi-layer composite dynamic membranes in ultrafiltration for algae-laden water treatment	103
Atmospheric water harvesting by osmotic distillation and direct contact membrane distillation using hydrophobic hollow fiber membranes	103
Implementing and maintaining an evergreen risk screening program in an exploration and production company	101
Performance of Bacillus subtilis D3d xylanase separated through optimized aqueous two-phase system in bio-bleaching of sugar beet pulp	101
Process intensification of hydrogen production by catalytic steam methane reforming: Performance analysis of multilayer perceptron-artificial neural networks and nonlinear response surface techniques	101
Cellular instabilities of outwardly propagating spherical hydrogen-oxygen flames using a soap bubble method	99
Leakage diagnosis of district heating-network based on system simulation and PCA_BP neural network	98
Sensitivity analysis of diesel particulate filters to geometric parameters during soot loading and its multi-objective optimization	94
One step synthesis of a novel Co-doped UiO-66 adsorbent for superior adsorption of organic dyes from wastewater	94
Quantifying the influence of soil factors on the migration of chromium (VI)	94
Metagenomic analysis of a top-down enriched straw biodegradation synthetic bacterial consortium (StrBsyn) facilitates anaerobic rice straw degradation	92
Quantum chemical calculation assisted efficient lithium extraction from lithium precipitation mother liquor via solvent extraction	90
Simulation study on fuel-nitrogen migration characteristics of oxy-fuel co-combustion of various ultra-low volatile coal-based solid fuels	89
A framework for environmental production of textile dyeing process using novel exhaustion-rate meter and multi-layer perceptron-based prediction model	88
Highly efficient Fe-Cu/CL catalysts based on low-cost clay minerals for NH3-SCR of NOx at low temperature	87
Biohythane production techniques and recent advances for green environment – A comprehensive review	87
Experimental evaluation of the impacts of diesel-nanoparticles-waste tire pyrolysis oil ternary blends on the combustion, performance, and emission characteristics of a diesel engine	86
Atrazine reclamation from an aqueous environment using a ruthenium-based metal-organic framework	86
Energy, exergy and sustainability analysis of a photovoltaic-thermal solar system with nano-enhancement and thermal energy storage integration	86
Ultrafiltration with organic solvents: A review on achieved results, membrane materials and challenges to face	85
Stepwise extraction and utilization of silica and alumina from coal fly ash by mild hydrothermal process	83
Experimental investigation of hydrogen jet flame inhibition by nitrogen jet	83
Impact of ammonia energy fraction on improving thermal efficiency and emissions of ammonia/biodiesel in dual fuel diesel engine	82
Nutrient recovery via struvite production from livestock manure-digestate streams: Towards closed loop bio-economy	82
On trending technologies of aluminium dross recycling: A review	82
Feature transfer projection with low-rank and dual graph embedding for multimode process monitoring	82
A green and facile pretreatment for flotation separation of electrode materials from spent lithium-ion batteries: Low-temperature roasting-induced deformation of PVDF	82
Environmental impacts and supply risks for LiFePO4 - LiCo Ni Mn O2 hybrid battery pack in China	82
Unraveling the potential of chemical recycling for poly(methyl methacrylate) through pyrolysis: Rigorous modeling, economic, and environmental evaluation	81
Design and variable scale optimization of flare gas recovery process for hydrogen production	80
Change point detection of processes using graph neural differential convolutional network with contrastive loss	80
Innovative electrostatic spray technology for control of particulate matter emitted from electron beam flue gas treatment process	80
Life cycle assessment of active pharmaceutical ingredient production: A case study of Citicoline	80
Assessment and prediction of the impact of wastewater treatment plant effluent on the ecological health of urban rivers	79
Experimental research on the influence of wall effect on the structure of cumulated semi-cokes	78
Inside Front Cover	77
CFD-based flow simulation and optimization of horizontal tube sedimentation tanks (HTST)	77
Biogas intake pressure and port air swirl optimization to enhance the diesel RCCI engine characteristics for low environmental emissions	76
The efficacy of Fe-doped ZrO2 nanoparticles as a supplement in polysulfone membranes for toxic dye removal	76
Waste to wealth: microbial-based valorization of grape pomace for nutraceutical, cosmetic, and therapeutic applications to promote circular economy	75
Thermal reaction characteristics and microstructure evolution of aluminium nano-powder in various mixtures of oxygen and nitrogen atmosphere	75
Effects of Cl-ion and temperature variations on steel corrosion in supercritical CO2 saturated aqueous environments	75
Particle emissions from a marine diesel engine burning two kinds of sulphur diesel oils with an EGR & scrubber system: Size, number & mass	75
Recovery of high-purity rhenium resources from W-Mo-Re alloy scraps by two-stage low-temperature oxidation volatilization	75
High temperature co-processing of basic oxygen furnace slag and blast furnace slag: Self-pulverization and reduction mechanism	74

Preparation of activated carbon fibers rich in S/N/O adsorption sites for selective and efficient trace Pb(II) removal from drinking water	73
A dual-channel signals-based method for pipeline leak detection by signal reconstruction and deep feature fusion	73
Optimization strategies for mitigating nitrogen loss in the aerobic composting of pig manure and microbial changes revealed by metagenomic analysis	72
Experimental study of the electrochemical hydrogen pump based on proton exchange membrane for the application in fusion fuel cycle	72
Physical and mechanical characterization of solid waste collected from rural areas of China: Experimental study	72
A multilayer analytical model for reactive contaminant transport through cutoff wall-aquifer systems: Addressing pre-installation contamination and source removal scenarios	72
From waste to resources: Coal gangue utilization-A comprehensive analysis	72
Effect of swirl number on structural and emission characteristics of moderate size burner flames	70
Textural properties and adsorption behaviour of recyclable Ni–Al layered double hydroxides for Congo red and Alizarin red S dyes removal in single and binary systems	70
Study on optimization of shelter locations and evacuation routes of gas leakage accidents in chemical industrial park	70
Thermal behavior of LiFePO4 battery at faster C-rates and lower ambient temperatures	70
Day-ahead robust optimal dispatching method for urban power grids containing high proportion of renewable energy	69
Unraveling the multiple role of UV in PAA/Fe(III) advanced oxidation: Mechanism, efficiency, and toxicity analysis	69
Process and mechanism of Zn and Co leaching from cobalt xanthate slag enhanced by oxidative roasting	69
An improved gossip-based distributed control strategy of multi-objective combined economic emission dispatch in smart grids with stochastic communication link failures	68
An innovative process combining electrocoagulation and photoelectro-Fenton-like methods during the abatement of Acid Blue 113 dye	68
A new UV-grafted photocatalytic membrane for advanced treatment of biologically treated baker’s yeast (BTY) effluent: Fabrication, characterization and performance evaluation	68
Fungal co-culture enabled co-fermentation of food waste for production of endoglucanase enzyme	67
Evaluation of char properties from co-pyrolysis of biomass/plastics: Effect of different types of plastics	67
Identification of security scenarios in offshore Oil&Gas production facilities based on past incident analysis	67
Efficient electrochemical detection of antibiotic ornidazole in synthetic and biological fluids using a trimetallic CuNiSnO4/MWCNT hybrid	66
A novel application of Chlorella sorokiniana for green hydrogen production via microbial electrolysis and Waste Biorefinery	65
Hourly ozone level prediction based on the characterization of its periodic behavior via deep learning	65
Variations in growth, photosynthesis, oxidative stress and microcystin production in Microcystis aeruginosa caused by acute exposure to Benzalkonium Chloride and Benzalkonium Bromide	65
Assessment of techno-economic analyzes of grid-connected nuclear and PV/wind/battery/hydrogen renewable hybrid system for sustainable and clean energy production in Mersin-Türkiye	65
Wastewater remediation using multi-soil layering (MSL) eco-technology: A comprehensive and critical review	64
Post-tanning wastewater treatment using electrocoagulation: Optimization, kinetics, and settlement analysis	63
Degradative removal of Sulfamethoxazole through visible light driven peroxymonosulfate activation by direct Z-scheme MIL-53(Co/Fe)/MoS2 heterojunction composite: Role of dual redox mechanism and effic	63
Effects of peroxide types on the removal performance and mechanism of sulfonamide antibiotics using graphene-based catalytic membranes	63
Development and prospects of major accident indicators in the offshore petroleum sector	62
The potential of chitin and chitosan from dead black soldier fly (BSF) (Hermetia illucens) for biodegradable packaging material – A critical review	62
BWO-CAformer: An improved Informer model for AQI prediction in Beijing and Wuhan	62
Experimental study on the safety of dry ice freeze plugging by throttling effect during pressure relief of industrial CO2 pipeline	62
A numerical study of gas explosion with progressive venting in a utility tunnel	62
Analysis of obstacle shape on gas explosion characteristics	62
Separation of iron from converter dust by superconducting HGMS: A simulation analysis and experimental study	62
Polypyrrole-carbon black/BiPO4 composites as efficient electrocatalysts for sensitive detection of furazolidone: A cost-effective approach for environmental monitoring	62
Study on the Adsorption Performance of Iron-Magnetic Modified Coffee Grounds Biochar for Copper, Lead, and Cadmium Ions in Acid Mine Drainage	62
Characteristics of polychlorinated dibenzodioxins/dibenzofurans from a full-scale municipal solid waste (MSW) incinerator in China by MSW classification	62
Industrial application of swirl regenerating micro-channel separation (SRMS) for fine catalysts removal from methanol-to-olefin quench water	61
Online application oriented dynamic modeling for the flue gas desulfurization tower in coal-fired power plants	61
Enhancement strategies for ZnSe based photocatalysts: Application to environmental remediation and energy conversion	61
Influence of ballasted material properties in enhancing the separation of high concentration suspended solids in coal mining water	61
Enhanced copper-containing wastewater treatment with MnO2/CNTs modified anode microbial fuel cell	61
Investigating the adsorption behavior and mechanisms of swine manure-derived biochar in tetracycline removal	61
Optimal planning of inter-plant hydrogen integration (IPHI) in eco-industrial park with P-graph and game theory analyses	60
Risk identification and assessment methods of offshore platform equipment and operations	60
Effect of static magnetic field exposure on biohydrogen production via dark fermentation of glucose	60
Anthropogenic dissolved organic matter accumulation fuels greenhouse gas diffusive emissions in urban lakes along trophic state levels	60
Efficient removal of organic contaminants in real shale gas flowback water using Fenton oxidation assisted by UV irradiation: Feasibility study and process optimization	60
Fault detection and isolation using probabilistic wavelet neural operator auto-encoder with application to dynamic processes	60
Inertization parameters for alcohols and ketones with nitrogen and carbon dioxide	60
Experimental study on vertical spill fire characteristics of transformer oil under continuous spill condition	60
A data-driven Bayesian network model integrating physical knowledge for prioritization of risk influencing factors	60
Potential bifunctional rhizobacteria from crude oil sludge for hydrocarbon degradation and biosurfactant production	60
Application of natural language processing in HAZOP reports	60
Investigation of hydrogen-air and acetylene-air flame propagation through porous media using infrared visualisation	59
Harvest of typical cold season submerged plant Potamogeton crispus regulating water purification capacity in wetland	59
Decision analysis for plastic waste gasification considering energy, exergy, and environmental criteria using TOPSIS and grey relational analysis	59
Advancements in gas-liquid separation based on membrane contactors: Critical factors enhancing separation efficiency	59
Towards greener metal production: A life cycle assessment model for copper-gold-silver mining and mineral processing operations	59
Study on the influence of combined utilization of air-fog curtain on fully mechanized face	58
Evaluation of climate intervention technologies for sustaining cities close to oil and gas operations: A sustainability and feasibility-based decision support system under molecular fuzzy set	58
Preparation of low-carbon cementitious materials based on fly ash from biomass power plant by alkali-salt solid waste synergistic effect: Activator ratio optimization, hydration process and sustainabi	58
Sustainable biodiesel production from slaughter byproduct fat using zirconia–lipase cluster	58
Gated recurrent unit-enhanced deep convolutional neural network for real-time industrial process fault diagnosis	58
Evaluation of the flammable region formed by liquid hydrogen spill using a new simplified pool model	58
Experimental research on the thermal and mechanical response of flowing pipelines under the horizontal jet flame	57
Analysis of the effect of coal mine operating parameters on multi-slit virtual impact separator	57
Natural gas leakage estimation in underground utility tunnels using Bayesian inference based on flow fields with gas jet disturbance	57
A comparative study of diesel engine fueled by Jatropha and Castor biodiesel: Performance, emissions, and sustainability assessment	57
Advance in organophosphorus pesticides detection technology based on acetylcholinesterase inhibition	57
The impact of energy (Electricity) losses on load capacity factor: A dynamic ARDL-based evidence from Pakistan	57
Smoke deposition and extraction in compartment fires with different ignition sources	57
Non-combustible MLI based insulation behavior under fire condition - Experimental and numerical investigation	56
Identification research of chemical process leakage based on deep learning and correlation-distance graph coding	56
Design and analyses of an AB5 - metal hydride based canister for hydrogen compressor application	56
Inside Front Cover	56
Application of smart overpressure protection devices to batch and semi-batch processes: The smart relief mode	56
Valorisation of plastic and wood waste through the incorporation in basalt fibre reinforced polymeric composites: A critical review	55

Optimization and evaluation of Eisenia fetida based vermicompost derived from fish processing waste, rice straw, and biogas slurry for sustainable agriculture	55
Reactor performance of static magnetic field membrane bioreactor for treating actual high-salt textile dyeing wastewater and possible mechanism on magnetically enhanced membrane fouling control	55
Life cycle assessment-guided development of iron-based biomass catalyst for sustainable tetracycline degradation	55
A genetic algorithm-based optimal selection and blending ratio of plastic waste for maximizing economic potential	55
Prediction model for pollution accidents trend in drinking water source areas: Enhancing water safety and comprehensive applications	55
A vapor phase side stream intensified extractive distillation process for separation of azeotropic mixture 2, 2, 2-trifluoroethanol and water	55
A potential closed-loop reutilization of iron sludge for wastewater treatment through the solid state reaction with spent coffee grounds	55
Characterization of cassia fistula seed and shell co-pyrolysis yield optimization by response surface methodology and compositional analysis	55
Preparation and characterization of fire-extinguishing efficiency of novel gel foam for lithium-ion battery fires	54
A diagnosis and monitoring system with a multi-scale channel and spatial attention mechanism on residual structures for tubing leakage detection	54
Contents	54
Development of an integrated bioprocess using Trichoderma harzianum BPGF1 for hexavalent chromium remediation and cellulolytic enzyme production	54
Dynamic modeling of NH3	53
An investigation of a process for selective biogas desulfurization and autotrophic denitrification in a membrane supported reactor	53
Retraction notice to “Enhancing urban energy storage and optimization through advanced EV charging and vehicle-to-grid integration in a renewable-based zero-energy city” [Process Saf. Environ. Prot. 1	53
High efficiency adsorption of uranium in solution using nano-TiO2 loaded with g-C3N4	53
Phosphomolybdic acid functionalized nano silica for enhanced anti-biofouling effect in polymer electrolyte membranes for microbial fuel cell application	53
Nitrogen doped sinocalamus oldhami lignin-based activated biochar with high specific surface area: Preparation and its adsorption for malachite green contaminant	53
Design of highly effective organic catalyst for hydrazine electrooxidation: Iodobenzo[b]furan derivatives	53
Design and 3E scrutiny of a trigeneration system, consisting of a solar chimney, multi-effect desalination, and water electrolyzer: A process for evaluating regional applications	53
A large-scale-outdoor continuous release of cryogenic liquid onto ground	53
A knowledge-driven spatial-temporal graph neural network for quality-related fault detection	53
Separation and recovery of metallic zinc and iron concentrate from blast furnace dust by vacuum carbothermal reduction	53
Exploration of time series model for predictive evaluation of long-term performance of membrane distillation desalination	53
Leak detection for natural gas gathering pipelines under corrupted data via assembling twin robust autoencoders	52
Deep multimodal fusion techniques for transient-based leakage detection in water pipelines	52
Semi-supervised convolutional generative adversarial networks for dynamic fault classification with manifold regularization	52
Co-pyrolysis of coal and biomass blends: Impact of pyrolysis temperature and biomass blending on thermal stability of coal, and composition of pyrolysis products	52
Real-time leak detection system: A hybrid model of moving average and Kalman filters with long short-term memory (LSTM) on the Internet of things (IoT) platform	52
Predicting initial spread rate of continuous spill fires using machine learning	52
Developing new spectral indices for identifying DOM sources in Liaohe River in a large-scale river basin by fluorescence spectroscopy and random forest model	52
Efficient H2O2 -sonochemical treatment of Penicillin G in water: Optimization, DI-HRMS ultra-trace by-products analysis, and degradation pathways	52
Development of a throttling venting model for CO2 pipelines and study of venting characteristics	52
Developing the measurement scale for organizational resilience assessment based on IMF SWARA method	52
Enhancing thermal energy and exergy harvesting in concentrated solar power systems using graphene-ZrO2/water hybrid nanofluid: An experimental study	51
Leak rate estimation framework based on fusion of leak behavior and shared-statistical features for natural gas gathering pipelines	51
Fault diagnosis of regenerative thermal oxidizer system via dynamic uncertain causality graph integrated with early anomaly detection	51
Synergistic integration of molten hydroxide direct carbon fuel cell and Stirling heat engine for efficient and clean coal use	51
Influence factors on the passenger evacuation capacity of cruise ships: Modeling and simulation of full-scale evacuation incorporating information dissemination	51
External heating-induced thermal runaway and gas venting characteristics of polymer lithium-ion cells with LiNixCoyMnzO2 cathode	51
A study of the fixed choke and constant outflow method for riser gas handling	51
The precipitation control of rare earth elements: Significance of hydrometallurgical parameters and assessment of environmental impact	51
A miniaturized electronic nose system based on sensor array for C2H4 concentration prediction	51
Fabrication and characterization of poly(methyl vinyl ether maleic anhydride) blended poly(lactic acid) ultrafiltration membrane with upgraded antifouling and separation performance	51
Surface engineering of γ-Al2O3 nanosheets with highly dispersed poly(ionic liquids) for selective CO2 adsorption	51
Gaussian process flow fusion physical model for fatigue evaluation of petrochemical equipment considering residual analysis	51
Effective removal of uranium (VI) with a SDBS doped PPy-SUS304 electrode from alkaline wastewater using electrodeposition strategy	51
Study on migration behavior and mechanism of strong carcinogenic PAHs in oil to fume during frying using stable isotope method	51
Hydration mechanism and performance evaluation of spodumene lithium slag as a low-carbon cementitious material for mining applications	51
The reaction laws and toxicity effects of synthetic phenolic antioxidants (SPAs) in wastewater and atmosphere: A theoretical investigation	51
Spatiotemporal attention mechanism-based deep network for critical parameters prediction in chemical process	51
Unveiling effect of iron on pyrolysis of bisphenol A epoxy by comparisons of product characteristics and reaction mechanisms	51
Direct liquefaction of low rank lignite with peach seed kernel and waste polypropylene for alternative fuel production	51
Hydrothermally synthesized tremella-like monometallic Ni/SiO2 for effective and stable dry reforming of methane (DRM) to syngas	50
In-situ production of magnetic char via rapid subcritical hydrothermal carbonisation of paunch waste	50
Development of pressure-impulse diagram to predict the damage of simply supported RC beams under close-in explosion	50
Analysis of molten slag from high-temperature plasma treatment of oil-based drill cuttings	50
Flotation and separation of microplastics from the eye-glass polishing wastewater using sec-octyl alcohol and diesel oil	50
The shift work affecting sleep pattern and social well-being of workers: The food manufacturing industry in Selangor, Malaysia	50
Aeromonas hydrophila-derived BioMnOx activates peroxymonosulfate for 2,4-dimethylaniline degradation in water: mechanisms and catalyst reusability	50
A journey through space and time in the Godbert-Greenwald furnace: The evolution of a dust cloud particle size distribution	50
Degradation of Orange IV by UV photolysis in nitrite-containing wastewater: Influencing factors, mechanism, and response surface methodology	50
Insights into the mechanism of naproxen inhibiting biohydrogen production from sludge dark fermentation	50
Development of protective cotton textiles against biohazards and harmful UV radiation using eco-friendly novel fiber-reactive bioactive agent	49
Fuzzy comprehensive evaluation strategy for operating state of electrocoagulation purification process based on sliding window	49
Application of wetland plant-based vermicomposts as an organic amendment with high nutritious value	49
Recovery and recycling core of phosphogypsum: Characteristic hazardous elements risk assessment and analysis	49
Source apportionment of environmentally persistent free radicals (EPFRs) and heavy metals in size fractions of urban arterial road dust	49
Corrigendum to “Effect of sodium and potassium on polysaccharide fouling on PVDF and graphene oxide modified PVDF membrane surfaces” [Process Saf. Environ. Prot. 165 (2022) 387–395]	49
Solar powered hybrid desalination system using a novel evaporative humidification tower: A numerical investigation	49
Rare earth element recovery and aluminum-rich residue production from high alumina fly ash by alkali pre-desilication enhance the mechanochemical extraction process	49
Synergistic remediation of cadmium-contaminated soil with acid-resistant chitosan-polyvinyl alcohol freeze-dried gels and citric acid	49
Life cycle assessment (LCA) and economic analysis of two-stage anaerobic process of co-digesting palm oil mill effluent (POME) with concentrated latex wastewater (CLW) for biogas production	49
An intelligent operational supervision system for operability and reliability analysis of operators manual actions in task implementation	49
The efficiency of dodecafluoro-2-methylpentan-3-one in suppressing NCM 811 lithium-ion battery fire	49
Data-driven approach for Cu recovery from hazardous e-waste	49
The double-edged effects of La2O3 and CeO2 on the performance of high-rate anaerobic sludge bed reactors and microbial mechanisms	49
Comprehensive technical study of a novel polygeneration arrangement using natural gas power plant and geothermal energy for producing electricity, heat, fresh water, and methanol	48
An enzyme-less energy driven electrochemical approach for carbendazim detection using f-MWCNT/NTAA Na3.H2O composite in water to improve environmental sustainability	48
Dynamic estimation of the fire service spatial accessibility for EV charging stations: Towards preventing severe fires and explosions	48
Co-utilization of zinc contaminated soil and red mud for high-strength ceramsite: Preparation, zinc immobilization mechanism and environmental safety risks	48
Current state, sources, and potential risk of heavy metals in sediments of typical inner lakes in the Dongting Lake Area	48
Geothermal assisted hydrogen liquefaction systems integrated with liquid nitrogen precooling; Thermoeconomic comparison of Claude and reverse Brayton cycle for liquid nitrogen supply	48
Efficient processing rare earth polishing powder solid waste by thiourea-H2SO4 system: Process optimization and thiourea decomposition effect	48
Development of boron nitride incorporated molybdenum disulfide nanocomposite as a simultaneous electrochemical transducer for environmentally hazardous ortho and para-nitroaniline isomers in aquatic e	48
A critical review of ultrasonication as a green technology for enhanced biomass valorization in bioethanol and biogas production	48
Detoxification and comprehensive recovery of stainless steel dust and chromium containing slag: Synergistic reduction mechanism and process parameter optimization	48
Novel control-aware fault detection approach for non-stationary processes via deep learning-based dynamic surrogate modeling	48
Application of Cu@Cu foam and RuO2@Ti for removal of nitrogen compounds and organic matters from non-standard treated municipal wastewater by continuous electrochemical process: Optimization and mecha	48
Urban air quality index forecasting using multivariate convolutional neural network based customized stacked long short-term memory model	48
Solid oxide fuel cells for shipping: A machine learning model for early detection of hazardous system deviations	47
Ammonia as a potential green dual fuel in diesel engines: A review	47
Resilience assessment of process industry facilities using dynamic Bayesian networks	47
Novel sulfur vacancies featured MIL-88A(Fe)@CuS rods activated peroxymonosulfate for coumarin degradation: Different reactive oxygen species generation routes under acidic and alkaline pH	47
Impact of oxygen and nitrogen-containing species on performance of NO removal by coal pyrolysis gas	47