Process Safety and Environmental Protection

Article	Citations
Valorisation of drinking water treatment sludge as substrate in subsurface flow constructed wetlands for upgrading treated wastewater	226
Modification of existing processes for the use of flue gas and polyethylene waste as raw materials with an applied intelligent calculation technique	186
Biohydrogen and biomethane production from biomass gasification: Compositional analysis, recent advancements, challenges, and prospects	183
Attenuation characteristics of hydrogen-air deflagration wave passing through inert gas section under non-premixed conditions	181
How to restore ecology and reduce carbon emissions in abandoned mines in a safe and environmentally friendly way？	180
Industrial potential of electro-oxidation and peroxymonosulfate coupling for efficient organic degradation in acidic dye wastewater	176
Model-free adjustment of reducing agent for SCR device under label deficiency: Regulation-oriented stage-wise reward deep Q-learning with transfer-learned state	174
Inertization parameters for alcohols and ketones with nitrogen and carbon dioxide	161
Wired for energy: Electromethanogenesis redefining anaerobic digestion	161
Recovery of filler material from mining waste: Techno-economic, and kinetic study	159
Life cycle assessment of active pharmaceutical ingredient production: A case study of Citicoline	140
Application of natural language processing for spill reduction in an exploration and production company	139
A critical review of in-duct ultraviolet germicidal irradiation systems: Mechanisms, challenges, and future directions	128
Experimental study on reducing BC emissions from a low-speed marine engine by using blended biodiesel and a nitro additive	126
Acidified steel slag activated persulfate oxidation of municipal sludge for enhanced dewatering：Enhancement performance and mechanism analysis	124
Hydrothermal carbonization of grapefruit peel in aqueous phase bio-oil: Drastic improvement in pore development in subsequent activation	124
Enhanced hydrolysis and acidification of corn straw via liquid fraction of digestate: Environmental adaptability and microbial mechanisms	124
Effect of Co and Ni impregnated ZSM-5 catalyst on pyrolysis products of Tithonia diversifolia: Kinetic study and thermodynamics	118
Avocado seed biomass-assisted synthesis of heterostructure bismuth vanadate nanomaterial by combustion method for the application of electrochemical lithium battery storage and supercapacitor	116
Thermal runaway propagation behavior and gas production characteristics of NCM622 battery modules at different state of charge	115
Economic assessment of utilization of plastic waste via pyrolysis power plant as low-carbon thermal power station alternative in Sudan	113
Molecular insights into the carbon dioxide sequestration in kerogen: An accelerated algorithm coupling molecular dynamics simulations and Monte Carlo methods	112
NIR-responsive self-healing superhydrophobic coatings: Enhanced, corrosion resistance, and mechanical stability	111
Enhanced Mo-Cu sulfide minerals flotation separation via depressing molybdenite with a novel eco-friendly polysaccharide	109
Elucidating the thermo-mechano-chemical stability and electrochemical potential of PVP@ZP+Ze composite ion exchange membrane for industrial application	107

Evaluation of the mechanisms of rare earth elements extraction from citrate solutions in the recycling of NdFeB magnets	103
Carbon-nitrogen modified geopolymer supported iron nanoparticles for the removal of perfluorooctanoic acid: Adsorption performance and mechanism	98
Fabrication of photo-responsive chitosan imprinted aerogels for selective adsorption and green desorption of dysprosium ions	95
Safety analysis of signal quality bits in nuclear power plant distributed control systems based on system-theoretic process analysis method	95
BWO-CAformer: An improved Informer model for AQI prediction in Beijing and Wuhan	95
Enhanced treatment of pyridine wastewater by a hybrid membrane biofilm reactor: Simultaneous biodegradation of pyridine and removal of nitrogen	95
Quantum chemical calculation assisted efficient lithium extraction from lithium precipitation mother liquor via solvent extraction	94
Effects of Cl-ion and temperature variations on steel corrosion in supercritical CO2 saturated aqueous environments	94
Nutrient recovery via struvite production from livestock manure-digestate streams: Towards closed loop bio-economy	92
Distribution, environmental behavior, and ecotoxicity of different metal oxide nanoparticles in the aquatic environment	92
Preparation of CS@BAC composite aerogel with excellent flame-retardant performance, good filtration for PM2.5 and strong adsorption for formaldehyde	91
Development of a novel setup for in-situ electrochemical assessment of top of the line corrosion (TLC) and its smart inhibition under simulated conditions	90
Catalytic ozonation performance and mechanisms of Cu-Co/γ-Al2O3 to achieve antibiotics and ammonia simultaneously removal in aquaculture wastewater	90
Thermo-economic and environmental assessment of a combined cycle fueled by MSW and geothermal hybrid energies	90
Improving the surface properties of adsorbents by surfactants and their role in the removal of toxic metals from wastewater: A review study	89
Synergistic enhancement of bio-oil production, quality, and optimization from co-pyrolysis purun tikus (Eleocharis dulcis) and plastic waste using response surface methodology	89
Process topology convolutional network model for chemical process fault diagnosis	88
Pilot experimental study on pollutant emission characteristics from co-combustion of coal and spent cathode carbon block	88
Preparation and performance of multi-ionic composite coagulants based on coal gasification coarse slag by one-step acid leaching	87
Screening adsorbent-working solution pairs for adsorption-driven osmotic heat engines based on experimental water adsorption isotherm database and machine learning	86
Arsenic contamination, effects and remediation techniques: A special look onto membrane separation processes	85
Influence of ballasted material properties in enhancing the separation of high concentration suspended solids in coal mining water	85
Anomaly detection of LiFePO4 pouch batteries expansion force under preload force	84
Thermodynamic and economic evaluation of biomethane and carbon dioxide liquefaction process in a hybridized system of biogas upgrading process and mixed fluid cascade liquefaction cycle	83
Comparative analysis of the carbon nanotubes and emerging MXene for CO2 capture and storage	82
Effects of impinging object on geometrical flame features of horizontal jet flames	81
Assess the performance of chemical coagulation process for microplastics removal from stormwater	80
Energy, exergy, and enviroeconomic assessment of double and single pass solar air heaters having a new design absorber	80
Application of natural language processing in HAZOP reports	80
Assessing agricultural non-point source pollution loads in typical basins of upper Yellow River by incorporating critical impacting factors	79
Determination of microplastics in the wetlands of specific regional area and unveiling the toxic properties of predominant HDPE particle on animal and plant models	79
Numerical simulation of carbon separation with shock waves and phase change in supersonic separators	79
Process design for energy efficient, economically feasible, environmentally safe methyl chloride production process plant: Chlorination of methane route	78
Waste oleaster seed-derived activated carbon mixed with coarse particles of fluid catalytic cracking as a highly-efficient CO2 adsorbent at low temperatures	78
Assessment of techno-economic analyzes of grid-connected nuclear and PV/wind/battery/hydrogen renewable hybrid system for sustainable and clean energy production in Mersin-Türkiye	78
Intelligent based decision-making strategy to predict fire intensity in subsurface engineering environments	77
A review of the development and application of soot modelling for modern diesel engines and the soot modelling for different fuels	76
Recurrent neural network-based model for estimating the life condition of a dry gas pipeline	75
Contents	74
Inside Front Cover	74
Inside Front Cover	74
2-D modeling to understand the design configuration and flow dynamics of Pond-In-Pond (PIP) wastewater treatment system for reuse	73
Inside Front Cover	73
Contents	73
Effects of polarizer on the metals migration and transformation behaviors during the thermal treatment of discarded LCD panels	73
Challenges in Environmental Science and Engineering (CESE-2019)	72
Contents	72
A fast and effective method for ammonium removal: Emulsion Liquid Membrane	72
Inside Front Cover	72
Analysis of pressure behavior during runaway reaction with case studies of various depressurization designs	71

Gas permeation and selectivity of polysulfone/carbon non-woven fabric membranes with sponge and finger-like structures	71
Volatile methyl siloxane separation from biogas using hollow fiber membrane contactor with polyethylene glycol dimethyl ether: A numerical and experimental study	71
Experimental investigation on condensation inside of storage tanks during rapid cooling in a heavy rain event	70
An extended corner point method for the synthesis of flexible water network	70
Transformation of water states and succession of functional microorganisms during synergistic bioevaporation process	70
A traditional Near Field-Far Field approach-based model and a spreadsheet workbook to manage Oxygen Deficiency Hazard	70
Performance analysis of up/down counters in alarm design	70
A comparative study between the biofiltration for air contaminated with limonene or butyric acid using a combination of olfactometric, physico-chemical and genomic approaches	69
Predicting thermal runaway in styrene polymerization reactions: Divergence criterion with phase space reconstruction	69
Catalysis engineering for environmental applications	69
Atmospheric water harvesting by osmotic distillation and direct contact membrane distillation using hydrophobic hollow fiber membranes	69
Inside Front Cover	69
Tube explosion during continuous supercritical water oxidation of sludge: An incident investigation	68
Implementing and maintaining an evergreen risk screening program in an exploration and production company	68
Analyzing the effects of different patterns of diffuser layouts on air distribution and mixing quality in an aeration tank using CFD	68
Zeolite A with waste material: Morphological effect of laser treatments in air	68
Inside Front Cover	68
Economic, environmental and multi objective optimization of a clean tri-generation system based co-firing of natural gas and biomass: An emergy evaluation	67
Study on the incipient motion of deposited particles caused by hydraulic erosion in mining-induced fracture: Optimizing the process parameters of HET	67
The feasibility of recycling marble & granite sludge in the polymer-modified cementitious mortars Part A: In polymer-modified cementitious adhesive mortar	67
Determination of radon activity among beach soil samples in Jeddah and Al-Qunfudhah, Saudi Arabia	67
Advanced oxidation of Trihalomethane (THMs) precursors and season-wise multi-pathway human carcinogenic risk assessment in Indian drinking water supplies	66
A novel air quality index prediction model based on variational mode decomposition and SARIMA-GA-TCN	66
Enhancing the biodegradation efficiency of a emergent refractory water pollutant by a bacterial isolate through a statistical process optimization approach	66
Hydrothermal liquefaction of pig carcasses to biofuel: A techno-economic analysis	66
Potential valorization and transformation of plastic biomass waste into useful fertilizers in agricultural Mediterranean soils under extreme climate conditions	66
Machine learning assisted prediction of solar to liquid fuel production: a case study	66
Improvement of manganese electrolytic process and secondary resources recovery of manganese: A review	65
Potential application of Ginkgo biloba extract as a green corrosion inhibitor for carbon steel reinforcement in chloride-polluted simulated concrete pore solution	65
A critical review on sustainable management and resource utilization of digestate	64
Experimental study on the effect of sloping substrate on the spill fire in a well-confined ship engine room	64
Sustainable waste valorization process selection through AHP and advanced Interval Valued Fermatean Fuzzy with integrated CODAS	64
Construction of Z-scheme CoAl-LDH/Bi2MoO6 heterojunction for enhanced photocatalytic degradation of antibiotics in natural water bodies	63
Study on flame propagation of H2/LPG premixed gas in a tube	63
Model assessment on the non-isothermal methane biofiltration at ambient conditions	63
Jujube stones based highly efficient activated carbon for methylene blue adsorption: Kinetics and isotherms modeling, thermodynamics and mechanism study, optimization via response surface methodology	62
Ultrafiltration with organic solvents: A review on achieved results, membrane materials and challenges to face	62
Decision analysis for plastic waste gasification considering energy, exergy, and environmental criteria using TOPSIS and grey relational analysis	62
Numerical investigation of suppressing thermal runaway propagation in a lithium-ion battery pack using thermal insulators	61
Experimental study on the channeling leakage properties of compact-size casing-cement sheath-stratum assembly in deep and ultra-deep wells	61
Risk identification and assessment methods of offshore platform equipment and operations	61
Research on process safety of offshore wind turbines installation: A theoretical model and empirical evidence	60
Flameless venting characteristics of hydrogen explosion under the coupling of carbon dioxide and metal foam	60
Experiment and numerical investigation on flow characteristics and near-field structure of dense phase CO2 pipeline leakage	60
Burning behavior of hydrogen jet flame inhibited by a wire mesh screen	59
Comparing efficacy of anodic and cathodic chambers in a low-cost algae-assisted microbial fuel cell for textile wastewater remediation	59
Effects of ignition location and vent area on the external explosion in vented hydrogen explosions	59
Enhanced removal of sulfamethoxazole via adsorption and photodegradation using biochar-modified iodine-doped TiO2 photocatalysts under simulated sunlight	59
Effects of atomizer outlet style on the flow characteristics and dust suppression application	59
Modeling, validation, and optimization of a rotating advanced oxidation contactor equipped with TiO2-zeolite composite sheets for sulfamethazine removal	59
CoFe2O4/carbon nitride Z-scheme heterojunction photocatalytic PMS activation for efficient tetracycline degradation: Accelerated electron transfer	58
Investigating the properties of nanoparticles from heveabrasiliensis shell for coolant application in PEMFCs	58
Microwave heating system for CuFe2O4/rGO/PMS enhanced catalytic-oxidative pre-treatment, water, and salt recovery from reverse osmosis reject of textile industry effluent	58
A comparative study of diesel engine fueled by Jatropha and Castor biodiesel: Performance, emissions, and sustainability assessment	57
Evaluation of corrosion inhibition performance of thiazolidine-2,4-diones and its amino derivative: Gravimetric, electrochemical, spectroscopic, and surface morphological studies	57
Experimental investigation on the high-temperature corrosion of 12Cr1MoVG boiler steel in waste-to-energy plants: Effects of superheater operating temperature and moisture	57
A numerical study of gas explosion with progressive venting in a utility tunnel	56
Atrazine reclamation from an aqueous environment using a ruthenium-based metal-organic framework	56
Main control factors and prediction model of flow-accelerated CO2/H2S synergistic corrosion for X65 steel	56
Developing a taxonomy and a dependency assessment model of performance influencing factors for intelligent coal mines	56
Non-premixed flame propagation inside and outside the different three-way tubes after the self-ignition of pressurized hydrogen	56
Thermal reaction characteristics and microstructure evolution of aluminium nano-powder in various mixtures of oxygen and nitrogen atmosphere	55
Study on the pitting corrosion behavior of X65 steel in supercritical and dense-phase CO2 based on in-situ electrochemical noise measurement	55
On trending technologies of aluminium dross recycling: A review	55
Synergizing alkaline fuel cell and thermocapacitive heat engine for hydrogen energy efficient utilization	55
Predicting major hazard accidents in the process industry based on organizational factors: A practical, qualitative approach	54
Insights into electro-assisted and selective adsorption of U(VI) using hierarchical porous and activated biocarbon from lotus pods/2D-MoS2/polypyrrole composites through capacitive deionization	54
Comparative pyrolysis characteristics and kinetics of agricultural food grains by thermogravimetric analysis	54
Online application oriented dynamic modeling for the flue gas desulfurization tower in coal-fired power plants	54
Full analysis and deep learning optimization of a sustainable and eco-friendly power plant to generate green hydrogen and electricity; A zero-carbon approach	53
Investigation of the effect of biofuel addition to jet fuel on engine performance and emissions in model jet engine	53
Functionalised carbon nanotube thin film nanocomposite membranes: A comparison study on the role of backbone monomers and hydraulic pressure on membrane's performance and fouling	53
Exergoeconomic evaluation of a novel multigeneration process using solar driven Kalina cycle integrated with gas turbine cycle, double-effect absorption chiller, and liquefied natural gas cold energy	52
Green and efficient separation of iron and phosphorus from high-phosphorus oolitic iron ore by reduction roasting without a dephosphorization agent	52
Construction of perovskite structured ZnSnO3 embedded graphene oxide nanosheets for in-situ electrochemical quantification of organoarsenic roxarsone	52
Inherent Process Risk Index (IPRI) – A tool for analyzing inherently safer design using Aspen Plus simulation	52
Catalytic ozonation of toluene and dichloromethane mixture at low temperatures over modified MnOx-based catalyst	52
Increasing the productivity of modified cords pyramid solar still using electric heater and various wick materials	52
Integrated membrane process (UF/RO/EDI) for treating a petrochemical wastewater to obtain ultrapure water for industrial reuse	52
Potential retrofits in office buildings located in harsh Northern climate for better energy efficiency, cost effectiveness, and environmental impact	52

Liaw-UNIFAC flash point model for alcohols-kerosene/diesel fuel blends using average fuel structure	52
Optimization of microwave power and graphite susceptor quantity for waste polypropylene microwave pyrolysis	51
Efficient bio-hydrogen production by dark co-fermentation of food-rich municipal solid waste and urban pruning wastes of pine, cypress, and berry	51
Spatial variability, source identification, and partitioning of groundwater constituents in a typical lakeside plain on Yungui Plateau	51
Experimental and numerical study of the fire behavior of a tank with oil leaking and burning	51
Advanced nano-based adsorbents for purification of pharmaceutical residue polluted water: A critical review	51
Efficient photodegradation of disulfine blue dye and Tetracycline over Robust and Green g-CN/Ag3VO4/PAN nanofibers: Experimental design, RSM, RBF-NN and ANFIS modeling	51
Experimental investigation and molecular reaction mechanism of methane/powdered coal deflagrations inhibited by neosynthetic fly-ash inhibitors	50
Improved integrated anaerobic–anoxic–oxic system for landfill leachate treatment using domestic wastewater as carbon source: Performance study and optimization	50
Water recovery efficiency improvement using the enhanced structure of the mist eliminator	50
Production of sustainable methanol from aquatic biomass via thermal conversion route	50
Conversion of secondary aluminum dross into hierarchical carbonate-intercalated Mg-Al layered double hydroxide for efficient CO2 capture	50
Inhibition characteristics of the electrokinetic removal of inorganic contaminants from soil due to evolution of the acidic and alkaline fronts	50
Air filtration performance enhancement of PTFE foam–coated filters at high temperatures via secondary strongly adhering PTFE nanofiber coatings	50
Experimental investigation of argon gas induction on diesel engine performance and emission characteristics: A comprehensive study on de-NOx techniques	50
A CFD analysis of liquefied gas vessel explosions	50
Investigation of gas diffusion behavior and detection of 86 Ah LiFePO4 batteries in energy storage systems during thermal runaway	50
Hourly ozone level prediction based on the characterization of its periodic behavior via deep learning	50
Recovery of binary-component textile wastewater contaminated by reactive dyes through adsorption onto magnetic separable MgO nanoparticles produced from solid waste of ductile cast iron industry, proc	50
Distributed plant-wide monitoring via modularity-optimal NMF decomposition based on graph embedding	49
Simulation study of NO2-Assisted regeneration performance of variable cell geometry catalyzed diesel particulate filter	49
Waste to wealth: microbial-based valorization of grape pomace for nutraceutical, cosmetic, and therapeutic applications to promote circular economy	49
The catalytic mechanism of cobalt-based sites in the oxidation of MgSO3	49
Waste liquid recirculation-driven hydrolysis mechanism of secondary aluminum dross (SAD) in the hydrometallurgical processes	49
A green and facile pretreatment for flotation separation of electrode materials from spent lithium-ion batteries: Low-temperature roasting-induced deformation of PVDF	49
New insights on waste mixing for enhanced fermentative hydrogen production	49
Applying an artificial intelligence model using multidimensional spatial-temporal data to predict arsenic contamination of groundwater	49
Application of silver-exchanged zeolite for radioxenon mitigation at fission-based medical isotope production facilities	49
Research on life cycle assessment of low-rank coal by hydrothermal carbonization in blast furnace	49
A CuBTC@PVDF-based super hydrophobic membrane for perfluoroheptanoic acid (PFHpA) rejection through membrane distillation	49
Seasonal and spatial characteristics of microbial community in intertidal wetlands: Aspect of microbial coupling	49
One step synthesis of a novel Co-doped UiO-66 adsorbent for superior adsorption of organic dyes from wastewater	49
Impact of ammonia energy fraction on improving thermal efficiency and emissions of ammonia/biodiesel in dual fuel diesel engine	49
Recovery of ferrous ammonium phosphate fertilizer from source-separated urine by electrocoagulation using response surface methodology (RSM)	49
Immobilization and transformation behavior of V(IV) and V(V) by ferrihydrite and lepidocrocite	49
Corrigendum to “Chloridizing roasting studies of spent NdFeB magnets for recovery of rare earth values” [Process Saf. Environ. Prot. 191A (2024) 1534–1547]	49
Contents	48
Removal of chemical oxygen demand from industrial estate sewage over hybridized anatase-graphene oxide-carbon nanotubes nanocomposite under solar irradiation	48
Defective cobalt-nitrogen dual-doped carbon materials for enhanced tetracycline hydrochloride degradation in flow-through electro-Fenton-membrane system	48
Optimization and degradation pathway of DEP in water by dielectric barrier discharge	48
Groundwater health risks and water quality assessment in the sources of many mighty rivers in Asia: Ngari, Tibet	48
Performance and microbiome of an anammox biofilter for treating secondary wastewater: Effect of organic matter, low-strength nitrogen, and temperature	48
Strong minimization of biological sludge production and enhancement of phosphorus bioavailability with a thermophilic biological fluidized bed reactor	48
Hybrid portland cement-slag-based geopolymer mortar: Strength, microstructural and environmental assessment	48
Construction of an algal-bacterial symbiosis system and its application to municipal wastewater treatment: A review	47
High temperature co-processing of basic oxygen furnace slag and blast furnace slag: Self-pulverization and reduction mechanism	47
Study on CO purification performance of copper manganese oxide catalysts used in underground diesel vehicles	47
Machine learning and response surface methodology for optimization of bioenergy production from sugarcane bagasse biochar-improved anaerobic digestion	47
Isolation and characterization of microcrystalline cellulose from rice stalk agro-waste and its application in enhancing inherent properties of PBAT biofilm	47
Beneficial reuse of pyrolytic post-remediation soil to activate persulfate oxidation and avoid exposure of environmentally persistent free radicals	47
Deep learning based early warning methodology for gas kick of deepwater drilling using pilot-scale rig data	47
Redefining of potential dust explosion risk parameters for additives in the petrochemical manufacturing process	47
Radio wave-driven enhancement of microbial fuel cells: Converting waste waves to power	47
Innovative electrostatic spray technology for control of particulate matter emitted from electron beam flue gas treatment process	46
Integrating an innovative geothermal-driven multigeneration approach and LNG cold energy utilization process for sustainable energy supply, producing hydrogen, power, heating, and cooling	46
Efficient electrochemical detection of antibiotic ornidazole in synthetic and biological fluids using a trimetallic CuNiSnO4/MWCNT hybrid	46
Study on a novel hydraulic rotary wind-spray control combined dust reduction device for shearer	46
Techno-economic feasibility of heat recovery chillers in subtropical hotel buildings	46
Experimental study on explosive boiling mechanism of horizontal vessels	46
Valorization of electric arc furnace FTP dust from Morocco steel industry for efficient recovery of refined zinc via coal treatment	45
Dispersion and explosion characteristics of unconfined detonable aerosol and its consequence analysis to humans and buildings	45
Effective degradation of OTC by Co-L@C cathode in heterogeneous Electro-Fenton system: Preeminent role of singlet oxygen species	45
Occurrence of pharmaceuticals and personal care products in domestic wastewater, available treatment technologies, and potential treatment using constructed wetland: A review	45
Optimization of microalgae cultivation and CO2 capture in a three-stage bubble column photobioreactor: Evaluation of control strategies	45
Performance assessment of Brayton-biogas multigeneration system fed by the municipal wastes	45
Wastewater remediation using multi-soil layering (MSL) eco-technology: A comprehensive and critical review	45
Synergistic Fe2+/UV activated peroxydisulfate as an efficient method for the degradation of thiacloprid	45
Mitigating the effect of inevitable Cu2+ by PHGMS for improving chalcopyrite-molybdenite flotation separation performance	45
Multi-objective optimization and 3E analysis of an integrated PV/T-wind-borehole-ORC driven ground source heat pump system	45
A dual-channel signals-based method for pipeline leak detection by signal reconstruction and deep feature fusion	45
Experimental and feasibility study of bio-waste valorization through pyrolysis for energy and materials production in the concept of circular economy	45
Development of a predictive accident model for dynamic risk assessment of propane storage tanks	44
Random pore model insights into structural and operational parameters for hydrogen-based iron oxide reduction	44
Investigation on decelerated propagation of hydrogen-air premixed flames in confined space	44
Study on thermal stability and thermal decomposition mechanism of 1,1-di-tert-butyl peroxy-3,3,5-trimethyl cyclohexane through adiabatic calorimeter and theoretical approach	44
Experimental investigation on the suppression of aluminum dust explosion by sodium carbonate powder	44
Characteristics of polychlorinated dibenzodioxins/dibenzofurans from a full-scale municipal solid waste (MSW) incinerator in China by MSW classification	44
Enhanced biogas yield in anaerobic digestion of citric acid wastewater by pre-treatment: The effect of calcium hydroxide precipitation and electrocoagulation process	44
A novel biochar derived from Prunella vulgaris L. residue of Chinese herbs for eco-efficient removal of four heavy metals from water: Optimization, mechanism, assessment and recycle	44
Enhanced photocatalytic degradation of sulfamethoxazole using MIL-101(Fe) supported Mo single-atom with oxygen vacancies under visible light activation of peroxymonosulfate	44
Investigation of steroid hormone residues in fish: A systematic review	44
Unsaturated Fe centers of 2D MOFs mediated the efficient Fenton-like reaction for organic pollutant elimination	44
Biohythane production techniques and recent advances for green environment – A comprehensive review	44
Hazard assessment of the thermal stability of nitrification by-products by using an advanced kinetic model	43
Analysis of obstacle shape on gas explosion characteristics	43
A sustainable process for Pb, Zn, and Fe from copper slag by salt roasting-magnetization roasting-magnetic separation	43
Resilience assessment framework for fast response process systems	43
Simultaneous optimization of economic, environmental and safety criteria for algal biodiesel process retrofitted using dividing wall column and multistage vapor recompression	43
Nanofiltration-reverse osmosis hybrid process for hardness removal in brackish water with higher recovery rate and minimization of brine discharges	43
Safe mining operations through technological advancement	43
Experimental study on vertical spill fire characteristics of transformer oil under continuous spill condition	43
Partial energy integration between biofuels production processes: Effect on costs, CO2 emissions and process safety	43
Statistical optimization of electrochemical conversion of heavy fuel oil to valuable products using response surface methodology	43
Facile in-situ fabrication of graphene oxide/poly(ionic liquid) composites and their adsorption performance for methyl orange	43
Immobilization of TiO2 nanoparticles on PES substrate via dopamine and poly (vinyl alcohol) for long-term oil/water purification	43