Cement & Concrete Composites

Article	Citations
Editorial Board	314
Editorial Board	262
Editorial Board	200
Optimization of mix proportions and manufacturing conditions of fly ash-based geopolymer mortar by parameters design with dynamic characteristics	188
Bond-slip behavior of lapped sand-coated deformed GFRP rebars in UHPC under double-row splice test	180
Mechanism of organic additives-induced carbonation activators on affecting cement mortars	178
Characterization of concrete shrinkage induced strains in internally-restrained RC structures by distributed optical fiber sensing	171
Eco-hybrid cement-based building insulation materials as a circular economy solution to construction and demolition waste	171
Development of 3D-printable alkali-activated GGBFS and fly ash binder-based mortars with concrete demolition waste as aggregates	169
Synergistic effect of fibres on the physical, mechanical, and microstructural properties of aerogel-based thermal insulating renders	166
Hydration and microstructure formation of magnesium oxysulfate (MOS) cement regulated by sepiolite with high adsorption ability	156
The role of CaO and MgO incorporation in chloride resistance of sodium carbonate-activated slag	151
Assessment of determination methods for time-zero of autogenous shrinkage in cement mortars	141
Advanced moisture control in porous aggregates for improved lightweight high-performance concrete	140
Diffusion coefficient and infinitesimal shrinkage strain of a Strain-Hardening Cement-Based Composite (SHCC) determined by inverse analysis of experiments	138
The counterbalance of the adverse side effects of releasing agent on the properties of cementitious materials with nano-particles	138
Effect of metakaolin utilization ratio and loop method-pre-shearing process variation on rheological properties of cementitious systems having different C3A content	134
Novel coal char-based cement grout: An experimental study on geotechnical and rheological properties	133
How do discharge rate and pipeline length influence the rheological properties of self-consolidating concrete after pumping?	127
Influence of elevated temperatures on the bond behaviour of ribbed GFRP bars in concrete	120
Development of a calcium sulfoaluminate-Portland cement binary system for twin-pipe 3D concrete printing	120
Low-temperature (−10 °C) curing of Portland cement paste – Synergetic effects of chloride-free antifreeze admixture, C–S–H seeds, and room-temperature pre-curing	119
Optimizing flexural cracking process of ultra-high performance concrete via incorporating microscale steel wires	118
Effect of a Ca-rich environment on the reaction process of the MgO-activated SiO2 system	116
Digital-volume-correlation-assisted crack extraction using X-ray computed tomography images of cementitious materials	115

Optimization of sodium alginate aided bio-deposition treatment of recycled aggregates and its application in concrete	112
Valorization of mineral wool waste in Class F fly ash geopolymer: Geopolymerization, macro properties, and high temperature behavior	112
Effects of sodium aluminate on fleeting semi-dry carbonation and properties of steel slag powders in low concentration CO2 atmosphere	111
Reaction mechanisms of alkali-activated glass powder-ggbs-CAC composites	109
Evaluation of novel copper-based antimicrobial admixtures for biocorrosion mitigation of cement paste	107
Preparation of coal gasification coarse slag-based alkaline activator and its activation mechanism in alkali-activated slag	107
An analytical model for anchor-mortar interface bonding based on electrochemical impedance spectroscopy	107
Effect of elevated Al concentration on early-age hydration of Portland cement	105
Effect of a novel spherical tailings aggregate on the macro- and mesoscopic properties of pervious concrete	105
Effect of superabsorbent polymer on the foam-stability of foamed concrete	104
Self-heating ultra-high performance concrete with stainless steel wires for active deicing and snow-melting of transportation infrastructures	100
Piezoresistive performance of cement-based composites with two-dimensional MXene subjected to various loading conditions and water content	98
Mitigating the ecological footprint of alkali-activated calcined clays by waste marble addition	98
Coating performance, durability and anti-corrosion mechanism of organic modified geopolymer composite for marine concrete protection	97
Investigation on the mechanical characteristics of multiscale mono/hybrid steel fibre-reinforced dry UHPC	95
The role of hydrotalcite-like phase and monosulfate in slag cement paste during atmospheric and accelerated carbonation	95
Effect of additional water or superplasticizer on key characteristics of cement paste made with superabsorbent polymer and other shrinkage mitigating materials	94
Mesoscale modelling of SFRC based on 3D RBSM considering the effects of fiber shape and orientation	94
Insights on the chloride adsorption stability in cement mortar under current field and sulfate attack: From experiments to molecular dynamics simulation	93
High-strength high-ductility Engineered/Strain-Hardening Cementitious Composites (ECC/SHCC) incorporating geopolymer fine aggregates	92
Multi-scale model investigating the effects of pore structure and drying-wetting cycles on diffusion in concrete	92
Ultra-stable foam enabled by nano silica engineering for foam concrete improvement	92
Enhanced mechanical and photocatalytic performance of cement mortar reinforced by nano-TiO2 hydrosol-coated sand	91
In-situ wet carbonation of steel slag powder paste made with carbonated water: Interaction mechanism between carbonation and hydration	90
Matrix wettability and mechanical properties of geopolymer cement-polydimethylsiloxane (PDMS) hybrids	90
Feasibility study of using carbonated and ultrasound treated electric arc furnace slag as a nano-enhanced supplementary cementitious material	88
Effect of dispersion behavior of silica fume on the rheological properties and early hydration characteristics of ultra-high strength mortar	86
Preparation of reactive urchin-like recycled concrete aggregate by wet carbonation: Towards improving the bonding capability of the interfacial transition zone in recycled aggregate concrete	85
Mechanism of regulating the mechanical properties and paste structure of supersulfated cement through ultrafine iron tailings powder	85
Interfacial bond between modified micro carbon fiber and high-strength cement paste in UHPC: Bond-slip tests and molecular dynamic simulation	85
Enhancing long-term tensile performance of Engineered Cementitious Composites (ECC) using sustainable artificial geopolymer aggregates	85
Tensile behavior simulation of ECC/SHCC at subzero temperatures based on a fiber/interface combination constitutive model	83
High-durability, low-carbon, and low-cost nano-engineered concrete for marine concrete infrastructures	83
Novel tri-viscous model to simulate pumping of flowable concrete through characterization of lubrication layer and plug zones	82
Effect of dosage of silica fume on the macro-performance and micro/nanostructure of seawater Portland cement pastes prepared with an ultra-low water-to-binder ratio	81
Sulfuric acid degradation of alkali-activated metakaolin cements supplemented with brucite	81
Numerical investigations on the influence of ITZ and its width on the carbonation depth of concrete with stress damage	81
Enhancing carbonation and thermal insulation of reactive magnesium oxide cement (RMC)-based 3D printable pastes with cenospheres	80
An approach to develop set-on-demand 3D printable limestone-calcined clay-based cementitious materials using calcium nitrate	80
Editorial Board	80
Durability evaluation of reinforced concrete with surface treatment of soy methyl ester-polystyrene under freeze-thaw cycles and calcium chloride	80
Retraction notice to “Effect of particle size of nanosilica on microstructure of C–S–H and its impact on mechanical strength” [Cement Concr. Compos. 97 (2019) 312–321]	79
Editorial Board	78
Insights into setting time, rheological and mechanical properties of chitin nanocrystals- and chitin nanofibers-cement paste	78
Quantitative Analysis of Pore Structures and Microcracks in Self-Healing Concrete after Freeze-Thaw Exposure: An X-Ray Computed Tomography-based Approach	77
Calcium sulfoaluminate cement and supplementary cementitious materials-containing binders in self-healing systems	77
Electrochemical chloride extraction on reinforced concrete contaminated external chloride: Efficiencies of intermittent applications and impacts on hydration products	77
Supersulfated cements based on pumice with quicklime, anhydrite and hemihydrate: Characterization and environmental impact	76
GGBS hydration acceleration evidence in supersulfated cement by nanoSiO2	76
Electrical resistivity of partially-saturated alkali-activated slag containing sodium nitrite admixture	75

Protection of galvanized steel using benzotriazole as a corrosion inhibitor in simulated concrete pore solution and alkali-activated fly ash solution	75
Layer interface characteristics and adhesion of 3D printed cement-based materials exposed to post-printing temperature disturbance	75
Nano-mechanism of graphene oxide reinforced fly ash-slag based geopolymer materials to form high polymerization degree C-(A)-S-H: A new view of physical-chemical synergistic effect	74
The positive effects of power ultrasound on Portland cement pastes and mortars; a study of chemical shrinkage and mechanical performance	74
Experimental and numerical analysis of the effects of different repair mortars on the controlling factors of macro-cell corrosion in concrete patch repair	74
A review of self-sensing ultra-high performance concrete: Towards next-generation smart structural materials	73
Rheology and structural build-up of sodium silicate- and sodium hydroxide-activated GGBFS mixtures	73
Effect of gypsum addition on acid resistance of ye'elimite rich calcium sulfoaluminate cement	72
Development and characteristics of multifunctional ultra-lightweight engineered cementitious composites incorporating cenospheres and PE fibre	72
Gamma irradiation sensitivity of early hardening cement mortar	72
Early age reaction, rheological properties and pore solution chemistry of NaOH-activated slag mixtures	72
Tartaric acid effects on hydration development and physico-mechanical properties of blended calcium sulphoaluminate cements	71
Concrete 3D printing of lightweight elements using hollow-core extrusion of filaments	71
Effects of unconventional fly ashes on cementitious paste properties	71
Unlocking the role of silica gel in enhancing mechanical properties and water resistance of magnesium oxysulfate cement	71
Modification of carbonation-cured cement mortar using biochar and its environmental evaluation	70
Exploring the potential of construction-compatible materials in structural supercapacitors for energy storage in the built environment	70
Experimental and theoretical studies on the hydration of ordinary portland cement/calcium sulfoaluminate cement blends containing biological admixtures	70
New insights on dehydration at elevated temperature and rehydration of GGBS blended cement	70
Assessing the durability performance of high belite cement incorporating fly ash under long-term temperature variations	69
Dynamic tensile properties of steel fiber reinforced polyethylene fiber-engineered/strain-hardening cementitious composites (PE-ECC/SHCC) at high strain rate	68
Using Fibre recovered from face mask waste to improve printability in 3D concrete printing	68
Dynamic properties of 3D printed cement mortar based on Split Hopkinson Pressure Bar testing	68
Analytical and experimental studies on alkali-silica reaction mechanism: Aggregate cracking and chemical composition change of gel	68
Influence of type and particle size of superabsorbent polymer on early water distribution and internal curing zone properties of cement paste	68
Microcell and macrocell corrosion of steel bars in reinforced concrete slabs under different corrosive environments and cathode/anode configurations	67
Strength recovery of thermally damaged high-performance concrete subjected to post-fire carbonation curing	67
The re-swelling mechanism of superabsorbent polymers (SAP) in the SAP voids of cement-based materials	66
Optimizing supplementary cementitious material replacement to minimize the environmental impacts of concrete	66
A review: Material and structural properties of UHPC at elevated temperatures or fire conditions	66
Biomimetic anisotropic hydrogel as a smart self-healing agent of sustainable cement-based infrastructure	66
New insights into the early-age reaction kinetics of metakaolin geopolymer by 1H low-field NMR and isothermal calorimetry	65
Microstructure as a key parameter for understanding chloride ingress in alkali-activated mortars	65
Transfer learning enables prediction of steel corrosion in concrete under natural environments	65
On the hydration of limestone calcined kaolinitic clay cement and energy-efficient production	64
Autogenous self-healing of polypropylene fiber reinforced ettringite-based composite	63
Characterization and analysis of electrothermal, thermoelectric, and current discharge properties of alkali-activated materials: Implications for energy conversion	63
In-situ formation of layered double hydroxides in MgO–NaAlO2-activated GGBS / MSWI BA: Impact of Mg2+ on reaction mechanism and leaching behavior	63
Insights into nano-silica deposition for carbon textile/cement composite interfacial bond: Quantification of spatial features	62
Performance and mechanisms of stimulated self-healing in cement-based composites exposed to saline environments	62
Leaching of immobilized cesium from NaOH-activated fly ash-based geopolymers	62
Dynamic responses of bioinspired plastic-reinforced cementitious beams	62
Editorial Board	62
Relationship between electrical resistance and single CNT fiber displacement relative to cement matrix – new insights on the electric polarization and spreading at debonded/slipped interface	61
Preparation of reactive seedings by in-situ precarbonation under power ultrasound-assisted mixing: Enhancing the hydration and mechanical properties of OPC	61
Sustainable geopolymer synthesis catalyzed by hexafluorosilicic acid: A low-energy approach using phosphate industrial waste	61
Effect of CO2 mixing on the rheological and electrochemical properties of fresh mortar at the early age	61
Two-scale modelling of fracture of magnesium phosphate cement under bending using X-ray computed tomography characterisation	60
Characterisation of a 3D-printed alkali-activated material based on waste mineral wool at room and elevated temperatures	60
Thermal-mechanical properties of metakaolin-based geopolymer containing silicon carbide microwhiskers	60
Microstructure evolution of cement-based materials under Cl−-SO42- coupling erosion in simulated ocean tidal area	60
Rheo-morphological investigation of static and dynamic stability of self-consolidating concrete: A biphasic approach	60
Novel C-F-S-H/PCE nanocomposites with high-efficiency seeding effect on the hydration of Portland cement	60
Effect of the incorporation ratio of recycled concrete aggregate on the properties of self-compacting mortar	60
Long-term investigation of alkali-silica reaction behaviors in seawater sea-sand concrete	59
Enhancement and underlying mechanisms of stainless steel wires to fatigue properties of concrete under flexure	59
Understanding the workability of alkali-activated phosphorus slag pastes: Effects of alkali dose and silicate modulus on early-age hydration reactions	59
Novel treatment method of coal bottom ash for strain-hardening alkali-activated composite	59
Enhancement of early age cementitious properties of yellow phosphorus slag via CO2 aqueous carbonation	59
Surface area and size distribution of cement particles in hydrating paste as indicators for the conceptualization of a cement paste representative volume element	58
Effect of chloride penetration on electrical resistivity of CNT–CF/cement composites and its application as chloride sensor for reinforced mortar	58
Production of vaterite via wet carbonation of carbide residue: Enhancing cement properties and CO2 sequestration	58
Heavy metals immobilization of LDH@biochar-containing cementitious materials: Effectiveness and mechanisms	58
Carbonation of cement paste with GGBFS: Effect of curing duration, replacement level and	58
New insights into the role of space on the microstructure and the development of strength of multicomponent cements	57
Plastic viscosity of cement mortar with manufactured sand as influenced by geometric features and particle size	57
Mechanical properties and micro-mechanism of cement-based materials strengthened by in-situ organic-inorganic polymerization	57
Synergetic effects of recycled crumb rubber and glass cullet on the engineering properties of geopolymer mortar	57
A review on mechanical properties and deterioration mechanisms of FRP bars under severe environmental and loading conditions	56
High-toughness M-S-H cement composites reinforced with cellulose fibers through CO2 curing	56
Mixed “ionic-electronic” thermoelectric effect of reduced graphene oxide reinforced cement-based composites	56
Effect of TiO2 on preparation condition, mechanical properties and alkali resistance of continuous basalt fibers	56
Micro-nano scale pore structure and fractal dimension of ultra-high performance cementitious composites modified with nanofillers	56
Experimental study of repairing rust-cracked reinforced concrete by electrophoresis deposition method	55
Meso-scale simulation of moisture transport in concrete during wet-dry cycles using 3D RBSM conduit model with variable diffusion model	55
Offsetting strength loss in concrete via ITZ enhancement: From the perspective of utilizing new alternative aggregate	55
Hydration kinetics and mechanism of C3S with cellulose nanocrystals	55
Review on physical and chemical activation strategies for ultra-high performance concrete (UHPC)	55
Compressive stress-strain relationship of steam free reactive powder concrete at ultra-low temperatures	55
Editorial Board	54

Fresh, mechanical, and microstructural properties of lithium slag concretes	54
Comparison of unique effects of two contrasting types of cellulose nanomaterials on setting time, rheology, and compressive strength of cement paste	54
Durability of concretes bearing construction and demolition waste as cement and coarse aggregate substitutes	54
Editorial Board	54
Study on thermal conductivity of 0D/1D/2D carbon filler reinforced cement composites with phonon physical model	54
Microstructure transformation of MCM-41 modified cement paste subjected to thermal load and modelling of its pore size distribution	53
Assessing sampling interval-dependent roughness in fractured steel fiber reinforced concrete using a double-exponential decay model	53
Concrete implantable bar enabled smart sensing technology for structural health monitoring	53
ε–greedy automated indentation of cementitious materials for phase mechanical properties determination	52
Mechanism analysis of microwave-carbonation solidification for carbide slag-based low-carbon materials	52
Effect of free CaO content on the phase composition of magnesium oxychloride cement	52
Chloride binding of early CO2-cured Portland cement-fly ash-GGBS ternary pastes	52
Observation on microstructure and shear behavior of mortar due to thermal shock	52
Synthesis and characterization of Polyethylene/B4C composite, and its neutron shielding performance in cementitious materials: Experimental and simulation studies	52
Mechanical response and predictive modelling of vascular self-healing cementitious materials using novel healing agents	51
Diverse effects of metal–organic frameworks on microstructure and compressive strength of cement-based composites	51
Reaction mechanism of Ca(OH)2-based carbon storage suitable for the production of building materials	51
Radiological assessment of iron silicate as a potential aggregate in concrete and mortars	51
Mechanisms of efflorescence of alkali-activated slag	51
Predicting relative compressive strength of concrete containing superabsorbent polymers	51
Stabilization of metastable calcium carbonate polymorphs on the surface of recycled cement paste particles: A two-step carbonation approach without chemical additives	51
Encapsulated crystallisation inhibitor as a long-term solution to mitigate salt damage in hydraulic mortars	50
Corrosion resistance of zinc in a low-carbon binder with belitic calcium sulfoaluminate cement	50
Influence of engineered self-healing systems on ASR damage development in concrete	50
Influence of fine inclusions on the morphology and mechanical performance of lightweight foam concrete	50
Preparation of alkali free liquid accelerator for shotcrete with fluorosilicic acid waste liquid and its accelerating mechanism	50
Influence mechanism of Nano-SiO2 on geopolymer recycled concrete: Change mechanism of the microstructure and the anti-carbonation mechanism	50
Performance and hydration mechanisms of ultrafine iron ore tailings enhanced supersulfated cement with high phosphogypsum content	50
Effect of PE fiber coated by polydopamine and nano-SiO2 on the strain hardening behavior of ultra-high-strength and high-ductility cementitious composites	50
3D printed concrete with sewage sludge ash: Fresh and hardened properties	50
Investigation of high strain rate effects on strain-hardening cementitious composites using Voronoi-cell lattice models	50
Influence of the water absorption-release processes of superabsorbent polymer with varying amounts of extra-entrained water on the surrounding cement paste	50
Integrated assessment of magnesium phosphate cement repaired concrete from the perspective of mechanical, geometric and electrochemical compatibility	49
Rheology modification of flowable mortar with CO2	49
Multiscale creep model for concrete considering from C-S-H gel scale to mesoscale with ITZ and irregular-shaped aggregates	49
A review on the modelling of carbonation of hardened and fresh cement-based materials	49
Enhancement in compressive strength of foamed concrete by ultra-fine slag	49
Relationship between fine aggregate size and the air void system of six mortars: I. Air void content and diameter distribution	49
Effect of shrinkage-reducing polycarboxylate admixture on cracking behavior of ultra-high strength mortar	49
Using modified nano-silica to prevent bubble Ostwald ripening under low atmospheric pressure: From liquid foam to air-entrained cement mortar	48
Degradation mechanism of seawater-mixed cementitious material subjecting to sulphate attack	48
Early-age shrinkage assessment of cementitious materials: A critical review	48
Influence of the type of the de-icing salt on its diffusion properties in cementitious materials at different temperatures	48
Passivation behavior of steel in novel low-carbon binders with belitic calcium sulfoaluminate cement	48
Improvement of stability and mechanical properties of cement asphalt emulsion composites using nano fibrillated celluloses	48
Development of photocatalytic carbonation coating for concrete: Enhancement of air quality and sequestration of CO2	48
Chloride-related steel corrosion initiation in cement paste prepared with the incorporation of blast-furnace slag	48
Healing capacity of Ultra High Performance Concrete under sustained through crack tensile stresses and aggressive environments	48
Enhancing anti-washout behavior of cement paste by polyacrylamide gelation: from floc properties to mechanism	47
Immobilization capacity of element arsenic in alkali-activated slag-arsenic tailing system during self-healing process	47
Understanding the role of carbon nanotubes in low-carbon concrete: From experiment to molecular dynamics	47
Ultra-ductile behavior of fly ash-based engineered geopolymer composites with a tensile strain capacity up to 13.7%	47
Combined effect of flax fibers and steel fibers on spalling resistance of ultra-high performance concrete at high temperature	47
Large-scale 3D printing concrete technology: Current status and future opportunities	47
Early hydration properties of Portland cement with lab-synthetic calcined stöber nano-SiO2 particles as modifier	47
Self-healing of PE-fiber reinforced lightweight high-strength engineered cementitious composite	47
An experimental study on the influence of applied voltage on current efficiency of rebars with a modified accelerated corrosion test	46
Effects and mechanisms of the hybrid-modified SAP with calcium sulfate dihydrate on the properties of UHPC	46
Experiment and simulation on the coupled effects of calcium leaching and chloride transport in concrete under hydraulic pressure	46
Quantitative characterization of carbonation of cement-based materials using X-ray imaging	46
Study on the hydration reaction and pore structure of ecologically recycled mortar with corn cob aggregates	46
Effect of curing temperatures and additional activators on chloride ingress and its induced mineralogical alteration of ground granulated blast furnace slag activated by Ca(OH)2	46
Mechanical response of small-scale 3D-printed steel-mortar composite beams	46
Fabrication of epoxy resin/acrylate IPNs magnetorheological material with oil-surface bonding for damage repair of long-distance oil pipelines	46
Carbonation of supersulfated cement concrete after 8 years of natural exposure	46
Improved corrosion inhibition of calcium disodium EDTA for mild steel in chloride-contaminated concrete pore solution	46
Editorial Board	46
Optimize Ni, Cu, Mo element of low Cr-steel rebars in tropical marine atmosphere environment through two years of corrosion monitoring	46
Exploring sulphate resistance of coal mining waste blended cements through experiments and thermodynamic modelling	46
Development of low-carbon cement: Carbonation of compounded C2S by β-C2S and γ-C2S	45
The long-term development in the micro- and macro-properties of geopolymers made from different fly ashes	45
Surface tension of cementitious pore solutions at low atmospheric pressure: An experimental exploration	45
Properties and hydrates of seawater-mixed magnesium potassium phosphate cements with high magnesium-to-phosphate ratio	45
Effect of temperature on the carbonation behavior of γ-C2S compacts	45
Corrosion resistance of RC/UHTCC beams with various healing promoters in marine environment	45
Experimental study on concurrent factors influencing the ITZ effect on mass transport in concrete	45
Using electrical resistivity to determine the efficiency of supplementary cementitious materials to prevent alkali-silica reaction in concrete	45
Damage characteristics and constitutive model of phosphogypsum/fly ash/slag recycled aggregate concrete under uniaxial compression	45
Production and compatibility assessment of denitrifying biogranules tailored for self-healing concrete applications	44
Distribution of porosity surrounding a microfiber in cement paste	44
Single bacteria spore encapsulation through layer-by-layer self-assembly of poly(dimethyldiallyl ammonium chloride) and silica nanoparticles for self-healing concrete	44
Carbon sequestration in aggregate and concrete by encapsulated biochar and carbonation: Experiment and simulation	44
Development of a low-alkalinity seawater sea sand concrete for enhanced compatibility with BFRP bar in the marine environment	44
Synthesis and properties of biomass derived carbon/PEG composite as photothermal conversion effective phase change material for functional concrete	44
Understanding the role of unzipped carbon nanotubes in cement pastes	44
In-line activation of cementitious materials for 3D concrete printing	44
Mix design concepts for 3D printable concrete: A review	43
Selection of suitable cellulose nanofibers derived from eco-friendly sources for the production of lightweight cementitious composites with tuned rheological, mechanical, and microstructure properties	43
Quantitative image analysis on the filling proportion of corrosion products in reinforced concrete using X-ray computed tomography	43
Predicting the strain-hardening behaviour of polyethylene fibre reinforced engineered cementitious composites accounting for fibre-matrix interaction	43
Innovative strategies for time-release PCE design and cement paste flowability control	43
Form pressure characteristics of self-consolidating concrete used in repair	43
Effect of corrosion pit distribution of rebar on pore, and crack characteristics in concrete	43
Insight into ettringite induced concrete crack healing by electrodeposition: Effects of electrochemical parameters and numerical simulations	43
Study on the electromagnetic field aligning steel fibres in UHPC reinforced beams: Effect, mechanism and flexural behavior	43