Journal of Cleaner Production

Papers
(The median citation count of Journal of Cleaner Production is 12. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-07-01 to 2025-07-01.)
ArticleCitations
Editorial Board555
Editorial Board545
Salt distribution and alkalinity characterization in bauxite residue disposal areas from the spatial scale range498
Novel insights on biofilm development in sewers: Cross-kingdom exchange of quorum-sensing signaling molecules430
Corrigendum to “China's waste import ban policies: An empirical analysis of waste plastics importation from Japan” [J. Clean. Prod. 329 (2021) 129606]421
Ensuring energy profitability and environmental sustainability through assessing marginal land suitability in China416
Corrigendum to “Exergy, environ–economic and economic analyses of a tubular solar water heater assisted solar still” [Journal of Cleaner Production 212 (2019) 630–646]360
Corrigendum to “Experimental assessment of thermal and rheological properties of coconut oil-silica as green additives in drilling performance based on minimum quantity of cutting fluids” [J. Clean. P352
Assessment of site-specific greenhouse gas emissions of chemical producers: Case studies of propylene and toluene diisocyanate315
Corrigendum to “Climate change adaptation of smallholders on the Tibetan Plateau under government interventions” [J. Clean. Prod. 381 (2022) 135171]315
Reclaiming sodium silicate into diatom301
Impression management in sustainability disclosures and information asymmetry: The case of Brazilian public companies300
On the potential of halophiles enriched from hypersaline sediments for biohydrogen production from saline wastewater291
The effects of environmental inspection on air quality: Evidence from China286
Tapping the potential of anammox upgrading in full-scale wastewater treatment plants through biofilm-enhanced anammox and denitrification276
The configuring pathways of green technology advance, organizational strategy and policy environment for realizing low-carbon manufacturing from the perspective of simmelian tie: A qualitative compara276
Preparation of biomolecular anthocyanin-immobilized plasma-cured nonwoven fibers from pomegranate (Punica granatum L.) and recycled cotton waste for detection of ammonia269
A hybrid risk management framework for resilient medical supply chain design in the post-pandemic era266
The environmental and social footprint of the university of the Basque Country UPV/EHU264
On the source of metals and the environmental sustainability of battery electric vehicles versus internal combustion engine vehicles: The lithium production case study261
A new model to evaluate water resource spatial equilibrium based on the game theory coupling weight method and the coupling coordination degree255
Evaluation of the control effect of bighead carp and silver carp on cyanobacterial blooms based on the analysis of differences in algal digestion processes255
Refined landslide susceptibility analysis based on InSAR technology and UAV multi-source data253
Sometimes linear, sometimes circular: States of the economy and transitions to the future253
Multi-objective collaborative agreements amongst shipping lines and marine terminal operators for sustainable and environmental-friendly ship schedule design247
Carbon-efficient production planning for long-chain integrated refinery-petrochemical processes: A material-energy-carbon optimization perspective246
The evolution and future perspectives of energy intensity in the global building sector 1971–2060245
Recovery of platinum-group metals from spent catalysts by microwave smelting243
Influence of electrochemical descaling treatment in simulated cooling water on the corrosion behavior of stainless steel242
A high-precision transient state prediction framework for ageing hydropower systems: Refined model, two-stage parameter identification and impact analysis242
Energy transition dynamics amid policy uncertainty, environmental regulations, and Geopolitics: Evidence from China240
Cerium recovery from aqueous solutions by bio/adsorption: A review in a circular economy context239
Novel catalytic self-cleaning membrane with peroxymonosulfate activation for dual-function wastewater purification: Performance and mechanism239
A bucket fill factor estimation method in construction environments by fusing deep learning and machine vision238
Efficient water use and reusing processes across Spanish regions: A circular data envelopment analysis with undesirable inputs237
Recent progress in pervaporation membranes for furfural recovery: A mini review236
Bio-methanol production from palm wastes steam gasification with application of CaO for CO2 capture: techno-economic-environmental analysis234
Evaluating the occurrence frequency of horizontal gene transfer induced by different degrees of heavy metal stress231
Exploiting machine learning for controlled synthesis of carbon dots-based corrosion inhibitors229
Life cycle greenhouse gas emissions of crude oil and natural gas from the Delaware Basin229
Identifying influential countries in air pollution control technologies: A social network analysis approach228
Hydroxylamine facilitated heterogeneous fenton-like reaction by nano micro-electrolysis material for rhodamine B degradation225
Iron-doped titanium lithium-ion Sieves@Sodium alginate-enhanced carboxymethyl cellulose aerogels: A synergistic leap in adsorption and sustainability224
A comprehensive comparison between two strategies to produce polyhydroxyalkanoates from domestic sewage sludge224
Renewable energy communities in rural areas: A comprehensive overview of current development, challenges, and emerging trends223
Impacts of soiling on solar panel performance and state-of-the-art effective cleaning methods: A recent review223
A novel sustainable biomass-fueled cogeneration cycle integrated with carbon dioxide capture utilizing LNG regasification and green hydrogen production via PEM electrolysis: Thermodynamic assessment223
Optimization and control for a novel uncoupled regenerative braking system of three-axle electric bus222
Knowledge evolution within human urine recycling technological innovation system (TIS): Focus on technologies for recovering plant-essential nutrients220
Can the cumulative effect of technological resources promote green technology collaborative innovation in resource-based regions?220
A network design problem for upgrading decentrally produced biogas into biomethane216
Road construction and air quality: Empirical study of cities in China215
Meta-Omics reveal the metabolic acclimation of freshwater anammox bacteria for saline wastewater treatment215
Exploring tourists' perceptions of ecosystem services in national parks to guide the optimization of management210
Synergistic effects of N-containing heterocyclic and Ca ligand structures on the phosphorus adsorption of N/Ca co-doped biochar210
Recycling spent mushroom substrate into fuel pellets for low-emission bioenergy producing systems209
A multifunctional coconut shell biochar modified by titanium dioxide for heavy metal removal in water/soil and tetracycline degradation209
Life cycle assessment of the production of beet sugar and its by-products200
Prospective life cycle inventory datasets for conventional and hybrid-electric aircraft technologies199
Life cycle assessment of urban food supply: Key findings and recommendations from a French metropolitan area case study198
Elucidating the prospects of paddy straw as a potential source of nanosilica: A road map towards sustainable agriculture, bioeconomy and entrepreneurship197
How to improve environmental performance of heavily polluting companies in China? A cross-level configurational approach197
How do the occurrence patterns of potentially toxic elements (PTEs) control their release behaviours from Pb/Zn smelter contaminated soils?197
Selective photo-Fenton degradation of glyphosate using Schiff base metal complexes: Insights into metal-mediated pathways196
Nature-based solutions addressing the water-energy-food nexus: Review of theoretical concepts and urban case studies196
Spatiotemporal characteristics analysis of commuting by shared electric bike: A case study of Ningbo, China194
Effects of various pyrolysis conditions and feedstock compositions on the physicochemical characteristics of cow manure-derived biochar194
Salinity impacts on a unique desalination system embedded with concentrated solar energy for cleaner production193
TiO2/Multi-walled carbon nanotube electrospun nanofibers mats for enhanced Cr(VI) photoreduction192
Estimating hydrogen demand function: A structural time series model192
Evaluation on environmental consequences and sustainability of three rice-based rotation systems in Quanjiao, China by an integrated analysis of life cycle, emergy and economic assessment192
Recent variations in soil moisture use efficiency (SMUE) and its influence factors in Asian drylands190
Tourism ecological security evaluation based on dynamic super-efficiency network SBM from the perspective of all-for-one tourism187
Effect of deep eutectic solvents on vulcanization and rheological behaviors of rubber vulcanizates187
Deciphering Mn modulated structure-activity interplay and rational statistical analysis for CO2 rich syngas hydrogenation to clean methanol185
Water reuse in a circular economy perspective in a microelectronics industry through biological effluents treatments185
A novel fuzzy integrated MCDM model for optimal selection of waste-to-energy-based-distributed generation under uncertainty: A case of the City of Cape Town, South Africa184
Photocatalytic potential of a titanium dioxide–supported platinum catalyst against VOCs with complicated composition under varying humidity conditions183
How does the urban built environment affect dockless bikesharing-metro integration cycling? Analysis from a nonlinear comprehensive perspective180
Selection of the cold logistics model based on the carbon footprint of fruits and vegetables in China179
Effectuated sustainability: Responsible Innovation Labs for impact forecasting and assessment179
Identifying the key drivers in retrieving blue sky during rapid urbanization in Shenzhen, China179
Sustainability assessment of corn production in conventional and conservation tillage systems177
The integration of the business model canvas and the service blueprinting to assist the conceptual design of new product-service systems177
High-performance and scalable wood-based solar-driven interfacial evaporator with corrugated structure for continuous desalination175
Quantifying the food-water nexus and key drivers in China's agricultural sector175
Towards sustainable growth paths for work integration social enterprises in the circular economy175
Life-cycle analysis of recycling of post-use plastic to plastic via pyrolysis175
Renewable marine fuel production for decarbonised maritime shipping: Pathways, policy measures and transition dynamics175
Multi-advantageous sorghum as feedstock for biogas production: A comparison between single-stage and two-stage anaerobic digestion systems.175
Environmental efficiency assessment for remanufacture of end of life machine and multi-objective optimization under carbon trading mechanism174
Resources, energy consumption and economic analysis for flame synthesis of ternary cathode materials174
Recovery of high pure pyrolytic carbon black from waste tires by dual acid treatment173
Optimal planning for distributed energy systems with carbon capture: Towards clean, economic, independent prosumers171
Towards neodymium recycling: Analysis of the availability and recyclability of European waste flows171
Converting wastewater cellulose to valuable products: A techno-economic assessment170
Design and performance evaluation of a new green pavement: 100% recycled asphalt pavement and 100% industrial solid waste168
Enabling sustainable agrifood value chain transformation in developing countries168
Analysis of the types of animal husbandry and planting that influence household biogas in rural China168
The effect of seasonal biomass availability and energy demand on the operation of an on-farm biomethane plant167
A new way of environmentally sustainable manufacturing with assessing transformation through the green deployment of Lean Six Sigma projects167
Sustainable business model innovation: Design guidelines for integrating systems thinking principles in tools for early-stage sustainability assessment166
Characterizing carbon emissions from China V and China VI gasoline vehicles based on portable emission measurement systems166
Assessing the impact of artificial intelligence and circular economy on the healthcare sector: An empirical evidence from the Indian context165
Coupling input and output intensity to explore the sustainable agriculture intensification path in mainland China165
Water footprint modeling and forecasting of cassava based on different artificial intelligence algorithms in Guangxi, China165
Hierarchical eco-driving control for plug-in hybrid electric vehicles under multiple signalized intersection scenarios162
Enhanced selective removal of Pb(II) by modification low-cost bio-sorbent: Experiment and theoretical calculations162
A power-intensive piezoelectric energy harvester with efficient load utilization for road energy collection: Design, testing, and application161
Negative word-of-mouth in the context of sustainability: The impact of sustainability scandals on consumers160
Characteristic and spatial-temporal distribution of anthropogenic Chlorine emissions in Central China: An updated inventory157
Corrigendum to “Strategic incentives and natural capital accounting for sustainable supply chain management: Measuring reputational impacts and consumers’ perceptions of the use of water through behav156
Emulsifying blends based on natural fats for eco-design of O/W emulsions156
Entrepreneurial spirit: A catalyst on the road to green and sustainable development——A theoretical analysis based on dynamic games and empirical tests from Chinese data156
Improving dairy manure hydrolysis and acidification through microbial community restructuring by adaptation to hyperthermophilic conditions156
The influence of ZSM-5 waste on the properties of fly ash-based foamed geopolymer156
Evaluation of ionic species contribution in critical metal extraction: A case study of high-purity vanadium production156
Research and application of aggregate interlocking concrete: A review156
HS3 as a novel solvent for carbon capture: Model validation and an industrial case study with comparison against 30 wt% MEA155
Life cycle assessment of a small WEEE reverse logistics system: Case study in the Campinas Area, Brazil155
Economic-financial analysis procedure: Implementation of inter-organizational circular systems155
Microplastics and their interaction with microorganisms in Bosten Lake water153
Investigation of sodium bicarbonate media blasting technology for achieving the cleaner production of graphite deposition reactor cleaning process: Process optimization and simulation153
Co-pyrolysis mechanism of waste vehicle seats derived artificial leather and foam151
Synthesis of sustainable production chains for phosgene-related byproducts151
Improvement of resource use efficiency versus mitigation of environmental impacts in rice production of Fujian Province, China151
Assessment of short-term supply disruption impacts for the Swiss mobility, energy and ICT sectors – Application of the SPOTTER approach150
Comparative techno-economic assessment and minimization of the levelized cost of electricity for increasing capacity wind power plants by row and angle layout optimization149
Modelling of thermal plasma-assisted carbon tetrafluoride abatement149
The effect of social responsibility on supplier continuity after disruptions: An experiment with purchasing professionals149
Resolving the dilemma of wastewater treatment plants: An empirical study on public acceptance for publicly accessible WWTPs148
Higher diesel price is associated with lower level of pollution: Evidence from Vietnam147
Is less more? Investigating citizen and consumer preferences for the future direction of livestock farming policy147
Critical conditions for zinc recovery in the FeOt-SiO2-CaO-Al2O3-ZnO slag system without metallic iron generation146
Analysis of forestry management based on dynamic life cycle assessment of biogenic carbon: A case study of a forestry resource-based city in Northeast China146
Sustainable production of DMF and EMF using inulin-rich raw plant biomass: Perspective towards biorenewable fuel146
Does political inequality undermine the environmental benefit of renewable energy?145
The synergetic effect of reducing pollutants and carbon quantified by exergy flow integrated resources and energy in an iron and steel symbiosis network145
Spatial and temporal characteristics of different types of pollution-intensive industries in the Beijing-Tianjin-Hebei region in China by using land use data145
Relative contributions of main factors to water levels in Wuchengxiyu Region, China145
One-step bleaching method for animal fiber by persulphate/hydrogen peroxide: Degradation mechanism of eumelanin145
Environmental regulation and economic growth: A new perspective based on technical level and healthy human capital145
Effect of pretreatment methods and doping amount of Enteromorpha on the exhaust purification performance of perovskite catalysts used in underground diesel vehicles144
Tracing China's virtual water trade in global value chain: Participation, characteristics, and inequality143
A novel strategy to capture phosphate as high-quality struvite from the sewage sludge ash: Process, mechanism and application142
Degradation of cathode in air and its influences on direct recycling142
Mechanistic insight into the hydrogen transfer pathway for selective upcycling of PET to arenes142
New model for evaluating greenhouse gas emissions from sludge treatment based on fossil and biogenic carbon migration141
Evaluation of various microwave-assisted acid digestion procedures for the determination of major and heavy metal elements in municipal solid waste incineration fly ash141
Predicting municipal solid waste using a coupled artificial neural network with archimedes optimisation algorithm and socioeconomic components141
The effect of carbon emission policy on financial performance of target companies in China141
Key points for green management of water-energy-food in the Belt and Road Initiative: Resource utilization efficiency, final demand behaviors and trade inequalities141
Co-N-doped oxidized carbon nanotubes enhanced H2O2 production for efficient sulfamethazine degradation via bio-electro-Fenton141
The impacts of heat-power cogeneration on air pollution: An empirical study based on the measures for the administration of heat-power cogeneration policy in China140
Why residents exhibit environmentally responsible behavior?139
Information sharing for competing manufacturers: The strategic analysis of environmental innovation139
The impact of sustainability orientation on performance in higher education. An empirical longitudinal investigation139
Optimal eco-label choice strategy for environmentally responsible corporations considering government regulations139
Intelligent energy management: Evolving developments, current challenges, and research directions for sustainable future139
Discharge characteristic analysis of lithium-sulfur batteries considering the discontinuous deposit and transport-limited effects138
Cracks and root channels promote both static and dynamic vertical hydrological connectivity in the Yellow River Delta138
Stable, zero liquid discharge, and highly efficient solar-driven multistage distillation device based on tree-inspired radial water transfer138
Biosynthesis of copper nanoparticles from copper tailings ore – An approach to the ‘Bionanomining’137
Improvement of mechanochemical leaching of zinc oxide ore — Optimization of grinding parameters for basket grinder136
Posting to impress? Organizational impression management tactics multinational firms employ to showcase innovations supporting SDGs136
Nature-based solutions still result in unfairness in carbon emissions136
Waste management and possible directions of utilising digital technologies in the construction context135
Global supply chain drivers of water use in Sub-Saharan Africa: Taking Ghana as a case135
Spatial-temporal variation and nonlinear prediction of environmental footprints and comprehensive environmental pressure in urban agglomerations135
Have me do, and I'll always be true: Exploring the match between green employees and their jobs135
Performance of reclaimed asphalt pavements containing recycled waste plastics135
From predictive to energy-based maintenance paradigm: Achieving cleaner production through functional-productiveness135
Impact of functional group types in ion exchange resins on rare earth element recovery from treated acid mine waters134
Dissolution behavior of DTPA-promoted barium slag and synthesis of submicron BaSO4 particles134
Reliable operation of an optimal self-scheduling multicarrier system with two alternatives: Multiple renewable utilities or hydrogen facilities134
A novel data-driven controller for solid oxide fuel cell via deep reinforcement learning133
Automotive parts remanufacturing models: Consequences for ELV take-back under government regulations133
Performance test and effect evaluation of guar gum-stabilized loess as a sustainable slope protection material133
Where does the wood come from? A physical accounting model to trace the origin of wood-based products133
Holistic renovation of a multi-family building in Greece based on dynamic simulation analysis133
Converting carbon vulnerable lands to wood plantations for use as building materials: Overall environmental performance and time-dependent assessment of carbon dioxide removals133
Building up more sustainable food supply chains: Implications for sustainable development131
Performance of red mud oxygen carriers in chemical-looping hydrogen production using different components of plastic waste pyrolytic gas131
The effect of different prediction methods of population in villages and towns on assessing the suitability of biomass energy development131
Public complaints of water pollution: A long-term spatiotemporal analysis in Japan131
Techno-economic analysis of forward osmosis pre-concentration before an anaerobic membrane bioreactor: Impact of draw solute and membrane material131
The dilemma in energy transition in Malaysia: A comparative life cycle assessment of large scale solar and biodiesel production from palm oil131
All-natural, hydrophobic, strong paper straws based on biodegradable composite coatings131
How do industrial land price and environmental regulations affect spatiotemporal variations of pollution-intensive industries? Regional analysis in China130
Mapping global conversations on twitter about environmental, social, and governance topics through natural language processing130
Residence time of carbon in paddy soils130
What drives demand for paid access to a sharing box with underused items? A choice experiment with Swedish consumers129
Economic optimization of microgrids based on peak shaving and CO2 reduction effect: A case study in Japan128
Changing the game: Situating energy citizenship in the Dutch socio-technical landscape128
The “SQUIID claim”: A novel LCA-based indicator for food dishes128
Reduction of greenhouse gas (GHG) emission in the vegetation-activated sludge process (V-ASP) involving decontaminated plants for decentralized wastewater treatment128
Industrial recycling of end-of-life vehicle windshield glass by mechanical beneficiation and complete recovery of polyvinyl butyral128
Salt exposure and emission reduction strategies in typical industrial wastewater treatment processes128
Influence of transboundary air pollution and meteorology on air quality in three major cities of Anhui Province, China128
Switch on-switch off small-scale mining: Environmental performance in a life cycle perspective127
Optimal management of cultivated land coupling remote sensing-based expected irrigation water forecasting127
Uncovering the dynamic interactions of China's energy-metal nexus from 2005 to 2020127
Thermodynamic analysis of the corrosion of high alumina cement by carbon dioxide127
Effectiveness and mechanism of using sodium alginate-magnesium silicate carrier in UASB reactor to resist shock loading of coking wastewater127
Extending cutting tool remaining life through deep learning and laser shock peening remanufacturing techniques125
Optimal strategies of green express packaging recycling and sales mode in an online platform125
Review of conceptual frameworks for smallholder farmers to achieve sustainable palm oil production125
Sustainability motivations and challenges in the Australian agribusiness125
Regional division and influencing mechanisms for the collaborative control of PM2.5 and O3 in China: A joint application of multiple mathematic models and data mining technologies125
Dynamic substance flow analysis of lead in the fossil fuel system of China from 1980 to 2018125
Heat storage and release characteristics of a prototype CaCO3/CaO thermochemical energy storage system based on a novel fluidized bed solar reactor125
Simulation of different biorefinery configuration including environmental, technical and economic assay using sugarcane bagasse124
Achieving net-zero U.S. ammonia: Technology and policy options and their emissions, investment, and cost tradeoffs124
A novel, clean, closed-loop process for directional recovery of rare earth elements, fluorine, and phosphorus from mixed rare earth concentrate123
Caffeine – Perspective natural biocide for wood protection against decaying fungi and termites123
Evaluating the contribution of decreasing heights of photovoltaic panels on light environment and agricultural production in agrivoltaic systems123
Fast and deep disinfection for face masks recycle using vacuum ultraviolet irradiation123
An integration model enabled deep learning for energy prediction of machine tools123
Evaluation of antioxidant and antibacterial activities of fish protein hydrolysate produced from Malaysian fish sausage (Keropok Lekor) by-products by indigenous Lactobacillus casei fermentation122
Techno-energy-enviro-economic multi-objective optimization to determine the best operating conditions for preparing toluene in an industrial setup122
Ecosystem services as a ballast to guide sustained economic growth by biodiversity conservation actions121
Vortex fluidic mediated generation of fatty acid ethyl esters from vegetable oils for applications in cosmetic emulsions121
Rethinking public service facility distribution and management strategies with the consideration of carbon peak – Insights from Suzhou, China121
Uncovering the impact mechanism and spatiotemporal evolution between farmland ecosystem health and optimal crop patterns121
Exploring farmer preferences towards innovations in the vanilla supply chain121
Organic-inorganic hybrid filler for improved thermal conductivity and anti-dripping performance of polybutylene succinate composite120
Climate mitigation efficacy of anaerobic digestion in a decarbonising economy120
Navigating pro-environmental shifts: Celebrity advocacy in South African townships120
An integrated framework for new sustainable waste-to-energy technology selection and risk assessment: An R-TODIM-R-MULTIMOOSRAL approach119
Decarbonizing materials sourcing and machining in the gas turbine sector, through a cost-carbon footprint nexus analysis119
Risk-constrained bidding and offering strategy for sector-coupled electricity-hydrogen systems incorporating accessibility level of mobility sector119
A strategic decision-making framework for sustainable reverse operations119
Comparing Mini and full-size electric vehicles in China: Evidence from user heterogeneity and satisfaction asymmetry119
Incorporation of main line impact into life cycle assessment of nutrient recovery from reject water using novel membrane contactor technology119
Different countries need strengthen water management to improve human health119
Effects of chemical composition on lightweight aggregates produced from contaminated soil: Phase regulation, immobilization mechanism and leaching prediction119
Synthesis and evaluation of catalytic activity of NiFe2O4 nanoparticles in a diesel engine: An experimental investigation and Multi-Criteria Decision Making approach119
Integrating construction and demolition waste impact categories into building energy optimization through a conceptual sustainability-oriented model118
A layer-by-layer green inkjet printing methodology for developing indium tin oxide (ITO)-based transparent and conductive nanofilms118
Environmental and thermoecological comparative assessment of improved humid air waste heat recovery configurations118
Parameter identification of a highly promising cleaner coal power station118
Energy-efficient collaborative scheduling of heterogeneous multi-stage hybrid flowshop for large metallic component manufacturing117
Consequential LCA of NPK fertilizers from microbial, animal, plant, and mineral origin highlights resource constraints and environmental impacts117
Experimental and numerical study on pyrolysis characteristics of organic impurities in waste salt117
Strategic risk aversion of smart energy hubs in the joined energy markets applying a stochastic game approach117
Environmentally friendly gelatin-based ink with durability on low surface energy substrates for anti-counterfeiting printing117
Resource curse or resource blessing? A moderated mediation model of the relationship between natural resource dependence and proenvironmental attitudes and behaviors117
Achieving reduced emission and enhanced air quality by designing a solar-driven indoor CO2 capture system117
Usage dynamics of environmental sustainability indicators for manufacturing and service systems117
Optimal combination weight interval-valued carbon price forecasting model based on adaptive decomposition method117
0.10032677650452