Journal of Cleaner Production

Article	Citations
Optimal network design for cloud infrastructures considering sustainable utilization of excess heat	996
Human-impacted land uses enhance network complexity but impair stability of soil microbial communities	634
Effectiveness and mechanism of using sodium alginate-magnesium silicate carrier in UASB reactor to resist shock loading of coking wastewater	576
Uncovering the dynamic interactions of China's energy-metal nexus from 2005 to 2020	539
Electro-assisted catalytic oxidation of flue gas desulfurization-derived magnesium sulfite using cobalt ferrite as catalyst under moderate condition	516
From waste to value: Exploring the social representations of composting	441
Fast and deep disinfection for face masks recycle using vacuum ultraviolet irradiation	426
Effects of chemical composition on lightweight aggregates produced from contaminated soil: Phase regulation, immobilization mechanism and leaching prediction	354
Does political inequality undermine the environmental benefit of renewable energy?	350
Improving dairy manure hydrolysis and acidification through microbial community restructuring by adaptation to hyperthermophilic conditions	331
A quest for greener grass: Value-action gap in the management of artificial turf pitches in Sweden	315
Recycled wind turbine blade fibers as reinforcement in mortar: A comprehensive performance evaluation	309
Dynamic modeling of consumer behavior in sustainable food markets	298
Co-N-doped oxidized carbon nanotubes enhanced H2O2 production for efficient sulfamethazine degradation via bio-electro-Fenton	293
Spatial-temporal variation and nonlinear prediction of environmental footprints and comprehensive environmental pressure in urban agglomerations	292
Resource curse or resource blessing? A moderated mediation model of the relationship between natural resource dependence and proenvironmental attitudes and behaviors	291
Influence of electrochemical descaling treatment in simulated cooling water on the corrosion behavior of stainless steel	282
E-DSGE model with endogenous capital utilization rate	278
Comparative techno-economic assessment and minimization of the levelized cost of electricity for increasing capacity wind power plants by row and angle layout optimization	277
Improvement of resource use efficiency versus mitigation of environmental impacts in rice production of Fujian Province, China	270
Economic-financial analysis procedure: Implementation of inter-organizational circular systems	269
Integrating construction and demolition waste impact categories into building energy optimization through a conceptual sustainability-oriented model	264
Editorial Board	263
Multi-objective model for optimal sensor placement in water distribution systems considering contamination probability variation-based contaminant impact	262
Changing the game: Situating energy citizenship in the Dutch socio-technical landscape	262

Resolving the dilemma of wastewater treatment plants: An empirical study on public acceptance for publicly accessible WWTPs	260
Nature-based solutions still result in unfairness in carbon emissions	254
Emulsifying blends based on natural fats for eco-design of O/W emulsions	253
Cocoa pod husk-derived organic soil amendments differentially affect soil fertility, nutrient leaching, and greenhouse gas emissions in cocoa soils	242
Performance of catechin as a sustainable-green inhibitor to inhibit the hydrogen production of Al alloy waste dust	242
Knowledge evolution within human urine recycling technological innovation system (TIS): Focus on technologies for recovering plant-essential nutrients	238
Farmers' cognition of the COVID-19 outbreak, risk perception and willingness of green production	237
Where does the wood come from? A physical accounting model to trace the origin of wood-based products	229
Recent variations in soil moisture use efficiency (SMUE) and its influence factors in Asian drylands	223
Removal of microplastics in sludge during intensive treatment processes in a wastewater treatment plant in China	220
Spatiotemporal comprehensive evaluation of water quality based on enhanced variable fuzzy set theory: A case study of a landfill in karst area	217
Formulation of NZVI-supported lactic acid/PAN membrane with glutathione for enhanced dynamic Cr(VI) removal	217
Navigating pro-environmental shifts: Celebrity advocacy in South African townships	214
Information sharing for competing manufacturers: The strategic analysis of environmental innovation	213
Life-cycle climate change and resource use decoupling indicators for product-service systems: Case study on rental business model	211
Techno-economic and environmental sustainability prospects on biochemical conversion of agricultural and algal biomass to biofuels	205
Systems design and techno-economic analysis of a novel cryogenic carbon capture process integrated with an air separation unit for autothermal reforming blue hydrogen production system	203
Prospective life cycle assessment of the Spanish electricity mix (2023–2050): Interrelation between climate change, water footprint, and costs	203
Synthesis and evaluation of catalytic activity of NiFe2O4 nanoparticles in a diesel engine: An experimental investigation and Multi-Criteria Decision Making approach	202
The integration of the business model canvas and the service blueprinting to assist the conceptual design of new product-service systems	202
Effectuated sustainability: Responsible Innovation Labs for impact forecasting and assessment	200
Reliable operation of an optimal self-scheduling multicarrier system with two alternatives: Multiple renewable utilities or hydrogen facilities	199
Usage dynamics of environmental sustainability indicators for manufacturing and service systems	195
Negative word-of-mouth in the context of sustainability: The impact of sustainability scandals on consumers	194
Optimization of phosphorus wet acid extraction from sewage sludge ashes: Detailed process insight via multi-variate statistical techniques	194
Identifying influential countries in air pollution control technologies: A social network analysis approach	193
Development of an integrated hydrothermal liquefaction and wet oxidation process: a pathway for an autothermal biorefinery	192
Conversion of landfilled waste-to-electricity (WTE) for energy efficiency improvement in Shenzhen (China): A strategy to contribute to resource recovery of unused methane for generating renewable ener	191
Holistic renovation of a multi-family building in Greece based on dynamic simulation analysis	191
A sustainable electricity market design: Application to the Iberian market	190
Analyzing and evaluating supplier carbon footprints in supply networks	189
Reducing carbon emissions: Can high-speed railway contribute?	188
Synthesis of eco-friendly polyaniline-zeolite nanocomposite for pollutant remediation: Empowered by robust machine learning algorithm	187
Key points for green management of water-energy-food in the Belt and Road Initiative: Resource utilization efficiency, final demand behaviors and trade inequalities	184
Spherical SBA-16 particles synthesized from rice husk ash and corn cob ash for efficient organic dye adsorbent	183
Different countries need strengthen water management to improve human health	182
Optimal design of national food waste monitoring for the food service sector	181
Rethinking public service facility distribution and management strategies with the consideration of carbon peak – Insights from Suzhou, China	181
Methodological and tool-based decision support framework for a sustainable end-of-life management of products	180
Enhancing microgrid sustainability: Dynamic management of renewable resources and plug-in hybrid electric vehicles	180
Ecosystem services as a ballast to guide sustained economic growth by biodiversity conservation actions	179
Reduction of greenhouse gas (GHG) emission in the vegetation-activated sludge process (V-ASP) involving decontaminated plants for decentralized wastewater treatment	179
Corrigendum to “Exergy, environ–economic and economic analyses of a tubular solar water heater assisted solar still” [Journal of Cleaner Production 212 (2019) 630–646]	178
Corrigendum to “Experimental assessment of thermal and rheological properties of coconut oil-silica as green additives in drilling performance based on minimum quantity of cutting fluids” [J. Clean. P	177
Corrigendum to “Climate change adaptation of smallholders on the Tibetan Plateau under government interventions” [J. Clean. Prod. 381 (2022) 135171]	177
Corrigendum to “Strategic incentives and natural capital accounting for sustainable supply chain management: Measuring reputational impacts and consumers’ perceptions of the use of water through behav	176
A strategic decision-making framework for sustainable reverse operations	175
Characteristic and spatial-temporal distribution of anthropogenic Chlorine emissions in Central China: An updated inventory	175
Investigating flood exposure induced socioeconomic risk and mitigation strategy under climate change and urbanization at a city scale	174
Dissolution behavior of DTPA-promoted barium slag and synthesis of submicron BaSO4 particles	173

Mechanistic insight into the hydrogen transfer pathway for selective upcycling of PET to arenes	173
On the intrinsic recycling potential of carbon-based materials and products; an assessment method and outlook	172
What drives demand for paid access to a sharing box with underused items? A choice experiment with Swedish consumers	172
Salt distribution and alkalinity characterization in bauxite residue disposal areas from the spatial scale range	171
Does the regional atmospheric quality punishment incentive mechanism (AQPI) promote environmental regulation? Subordinate government as an agent of superior environmental policies	171
How to promote the sustainable development of strategic emerging industries: Evidence from Guangzhou	171
Residence time of carbon in paddy soils	170
Entrepreneurial spirit: A catalyst on the road to green and sustainable development——A theoretical analysis based on dynamic games and empirical tests from Chinese data	170
Sharing hydrogen storage capacity planning for multi-microgrid investors with limited rationality: A differential evolution game approach	170
The influence of multi-step modification method on the adsorption effect of alkali metal adsorbent in high temperature corrosive environment	170
Automotive parts remanufacturing models: Consequences for ELV take-back under government regulations	170
Revolutionizing conventional adsorbents: Strengthening dimethyl phthalate adsorption through N/P co-doping macroscopic robust porous carbon	169
Unleashing redox activity of biochar via a green thermal air oxidation process: Insights from machine learning	166
Optimization of Feed-in Tariff mechanism for residential and industrial photovoltaic adoption in Hong Kong	166
Strategic decision for capacity portfolio in supply chain network considering emission permit price and demand uncertainty	165
Tapping the potential of anammox upgrading in full-scale wastewater treatment plants through biofilm-enhanced anammox and denitrification	164
Generative design for sustainability-oriented factory planning	164
Characteristics and techno-economic analysis of nickel-cobalt-manganese composite oxides produced by the flame synthesis method	163
Spatial disparities and policy implications of urban-ecosystem coupling: A case study from the southern China	162
Effects of biochemical component interactions on molecular transformations in bio-oil during microwave-assisted pyrolysis of protein-rich biomass	162
Critical conditions for zinc recovery in the FeOt-SiO2-CaO-Al2O3-ZnO slag system without metallic iron generation	161
Reassessing the green promise: unveiling the limited impact of national innovation systems on environmental outcomes	161
Thermodynamic analysis of the corrosion of high alumina cement by carbon dioxide	161
Constructed wetland for enhanced nitrogen removal of carbon limited wastewater and its economic and environmental assessment: A review	161
Exploration of superoleophobic multi-bionic microstructures on cemented carbide surface for high-efficiency reduction of workpiece removal energy in turning	160
A sustainable and economic cementitious backfilling material based on soda residue-tailings: Comprehensive study of flow characteristics, economic cost and strength	160
Influence of inner wall roughness of supersonic separator on non-equilibrium condensation of CO2 benefiting flue gas decarbonization	159
Environmentally friendly gelatin-based ink with durability on low surface energy substrates for anti-counterfeiting printing	159
Machine learning for kinetic constant of organic pollutant removal in ultrasonic-activated oxidant processes: Scenario simulation for interpretation and validation	159
Multi-objective carbon-efficient scheduling in distributed permutation flow shops under consideration of transportation efforts	158
Enzyme-assisted dewatering and strength enhancement of cellulosic fibers for sustainable papermaking: A bench and pilot study	157
The effect of different prediction methods of population in villages and towns on assessing the suitability of biomass energy development	156
Building up more sustainable food supply chains: Implications for sustainable development	156
Clogging phenomenon in Pervious Concrete (PC): A systematic literature review	156
Synergistic effects of N-containing heterocyclic and Ca ligand structures on the phosphorus adsorption of N/Ca co-doped biochar	156
A network design problem for upgrading decentrally produced biogas into biomethane	155
Uncovering the impact mechanism and spatiotemporal evolution between farmland ecosystem health and optimal crop patterns	154
Sustainable business model innovation: Design guidelines for integrating systems thinking principles in tools for early-stage sustainability assessment	154
Implementing circular economy principles in micro heat sink development: A techno-economic-sustainability analysis	154
To import or not to import: A global comparative study of energy and natural resource policies for sustainable development	153
Integrating geological indicators for enhanced mapping of soil organic matter in hilly landscapes	152
How do the occurrence patterns of potentially toxic elements (PTEs) control their release behaviours from Pb/Zn smelter contaminated soils?	152
Elucidating the prospects of paddy straw as a potential source of nanosilica: A road map towards sustainable agriculture, bioeconomy and entrepreneurship	151
The impact of particle size and photoaging on the leaching of phthalates from plastic waste	151
Salt exposure and emission reduction strategies in typical industrial wastewater treatment processes	150
Vortex fluidic mediated generation of fatty acid ethyl esters from vegetable oils for applications in cosmetic emulsions	150
Review of conceptual frameworks for smallholder farmers to achieve sustainable palm oil production	149
Performance of red mud oxygen carriers in chemical-looping hydrogen production using different components of plastic waste pyrolytic gas	149
Development of red mud-modified geopolymer coating with radiative cooling effect for footway application	149
Cracks and root channels promote both static and dynamic vertical hydrological connectivity in the Yellow River Delta	148
Experimental study on CO2 closed-cycle heat pump drying for lemon assisted by ultrasonic pretreatment	148
E-plastics in a circular economy: A comprehensive regulatory review	148
Stable, zero liquid discharge, and highly efficient solar-driven multistage distillation device based on tree-inspired radial water transfer	147
Highly efficient defluorination of perfluorooctanoic acid by a BiOCl-ND photocatalyst: Enhanced charge transfer and synergistic mechanism	146
Climate change risks to mine closure	145
Exploring tourists' perceptions of ecosystem services in national parks to guide the optimization of management	144
Preparation of biomolecular anthocyanin-immobilized plasma-cured nonwoven fibers from pomegranate (Punica granatum L.) and recycled cotton waste for detection of ammonia	143
Co-pyrolysis mechanism of waste vehicle seats derived artificial leather and foam	143
Novel insights on biofilm development in sewers: Cross-kingdom exchange of quorum-sensing signaling molecules	143
Novel catalytic self-cleaning membrane with peroxymonosulfate activation for dual-function wastewater purification: Performance and mechanism	142
Discharge characteristic analysis of lithium-sulfur batteries considering the discontinuous deposit and transport-limited effects	142
Sustainability motivations and challenges in the Australian agribusiness	142
How the correlation between electricity prices and emission intensity affects the economic and ecological potential of industrial demand-side flexibility measures	142
Carbon reduction and understanding through simulation of transportation (CRUST) for e-commerce	142
The new identity of cellulose pulp: A green silver nanoparticles support for highly efficient catalytic hydrogenation of 4-nitrophenol	141
Environmental and thermoecological comparative assessment of improved humid air waste heat recovery configurations	141
An efficient heterogeneous solid acid catalyst derived from sewage sludge for the catalytic transformation of sludge into biodiesel: Preparation, characterization, and arylation process modeling	141
Are Geographical Indication products environmentally sound? The case of pears in North of Italy	140
Techno-economic analysis of forward osmosis pre-concentration before an anaerobic membrane bioreactor: Impact of draw solute and membrane material	140
The influence of ZSM-5 waste on the properties of fly ash-based foamed geopolymer	140
Unlocking the potential: Transforming hazardous waste into solid cementitious materials	140
The “SQUIID claim”: A novel LCA-based indicator for food dishes	140
Circular economy for social welfare in European NUTS 2 regions: Evaluation of circular strategies and income differences	139
Long-term feasibility of carbon capturing in community energy systems: A system dynamics-based evaluation	139
The effect of carbon emission policy on financial performance of target companies in China	139
Assessing risk of metro microenvironmental health vulnerability from the coupling perspective: A case of Nanjing, China	138
Synthesis of sustainable production chains for phosgene-related byproducts	137
Life cycle assessment of urban food supply: Key findings and recommendations from a French metropolitan area case study	137
Global supply chain drivers of water use in Sub-Saharan Africa: Taking Ghana as a case	137
Impression management in sustainability disclosures and information asymmetry: The case of Brazilian public companies	137

Hydrogen foam flooding for integrated oil recovery and clean energy storage in depleted reservoirs	136
Evaluation of glacier service function and value in the Sanjiangyuan Nature Reserve in China (SNRC)	135
New tracer for anthropogenic pollution in the atmosphere: Stable potassium isotopes in rainwater	135
When less is more: The puzzling impact of employee education on green innovation performance	134
Macroeconomic effects of green subsidies	134
Assessment of short-term supply disruption impacts for the Swiss mobility, energy and ICT sectors – Application of the SPOTTER approach	134
Production of low phenolic naphtha-rich biocrude through co-hydrothermal liquefaction of fecal sludge and organic solid waste using water-ethanol co-solvent	133
Towards efficient and selective boron recovery from end-of-life rare earth permanent magnets using an ionic liquid	133
The impact of urban polycentricity on carbon emissions: A case study of the Yangtze River Delta Region in China	133
Analysis of changes on substrates filling constructed wetland systems after landfill leachate treatment - FTIR study	133
The effect of social responsibility on supplier continuity after disruptions: An experiment with purchasing professionals	133
Modelling the role of industrial structure adjustment on China's energy efficiency: Insights from technology innovation	132
TiO2/Multi-walled carbon nanotube electrospun nanofibers mats for enhanced Cr(VI) photoreduction	132
An integration model enabled deep learning for energy prediction of machine tools	132
Influence of thermally activated coal gangue powder on the structure of the interfacial transition zone in concrete	132
A static and dynamic coupling approach for maintaining ecological networks connectivity in rapid urbanization contexts	132
Unravelling phosphorus mobilisation from sludge incineration ash: Organic-iron-phosphate complexation and aqueous speciation	131
Orbital-directed electron compensation unlocks trace antibiotic elimination via cooperative metal-nonmetal centers	131
Advancing hydrochar production and application: A critical examination of microwave irradiation and blended feedstocks synergy	131
Green upcycling of jet fuel precursors via hydrothermal liquefaction of plasma-pretreated cellulosic materials over an Fe–alkaline catalyst	131
Multidimensional evaluation of stepped hole EDM drilling in Cf/UHTCs components: Efficiency, performance, economic, and carbon emission	130
Constructing electron-rich metal sites in M0.5Co0.5O through N substitution for efficient peroxymonosulfate activation to degrade organic pollutants	130
Investigation of sodium bicarbonate media blasting technology for achieving the cleaner production of graphite deposition reactor cleaning process: Process optimization and simulation	129
Optimal combination weight interval-valued carbon price forecasting model based on adaptive decomposition method	129
Consequential LCA of NPK fertilizers from microbial, animal, plant, and mineral origin highlights resource constraints and environmental impacts	128
A collaborative coagulation strategy for algae-laden and dye-containing water treatment	128
Towards sustainable growth paths for work integration social enterprises in the circular economy	128
Floatable Janus nanofiber membrane driven by photothermal bubbles: A novel platform for efficient photocatalytic water purification	128
Skills for the twin transition in manufacturing: A systematic literature review	128
A comprehensive intelligent framework for interpreting and quantifying the microstructure of waste-derived alkali-activated materials: A case study of fly ash/slag pastes	128
A comprehensive review on the application of renewable waste tire rubbers and fibers in sustainable concrete	127
Photocatalytic potential of a titanium dioxide–supported platinum catalyst against VOCs with complicated composition under varying humidity conditions	127
A co-ensiling strategy of food wastes: Peanut shell as an additive to distillers' grains to improve efficiency of energy conversion	127
Strategies to alleviate clogging in constructed wetlands: What can be learned from the microbial fuel cell coupled membrane bioreactor?	127
Mechanistic study on the swelling/solubilization behavior of EVA by NMP and BDG for efficient recycling of PV modules	126
Leveraging large language models to explain provincial heterogeneity in online discussion of water pollution in China: A socioeconomic and environmental perspective	126
The impact of safety climate on human-technology interaction and sustainable development: Evidence from Indonesian oil and gas industry	126
An integrated framework for energy performance improvement in manufacturing: From mapping to optimization	126
Designing a resilient and sustainable biomass supply chain network through the optimization approach under uncertainty and the disruption	125
Quantifying the food-water nexus and key drivers in China's agricultural sector	125
Distribution and migration characteristics of microplastics in farmland soils, surface water and sediments in Caohai Lake, southwestern plateau of China	125
Dry reforming of methane using a novel microreactor fabricated from stacking of stainless steel wire-mesh support catalysts	125
The positive effects of refluxing thermophilic compost materials on composting at low temperatures: insight into the large-scale composting experiments	125
Modelling of thermal plasma-assisted carbon tetrafluoride abatement	125
Can the cumulative effect of technological resources promote green technology collaborative innovation in resource-based regions?	125
A hybrid carbon price prediction model based-combinational estimation strategies of quantile regression and long short-term memory	125
Data-driven multi-goal assessment of crop rotation: Synergizing resource, economic, environmental benefits in fragmented farmlands	125
Relative contributions of main factors to water levels in Wuchengxiyu Region, China	124
Research and application of aggregate interlocking concrete: A review	124
Higher diesel price is associated with lower level of pollution: Evidence from Vietnam	124
A bucket fill factor estimation method in construction environments by fusing deep learning and machine vision	124
Extending cutting tool remaining life through deep learning and laser shock peening remanufacturing techniques	124
Evaluating the occurrence frequency of horizontal gene transfer induced by different degrees of heavy metal stress	124
Optimization and control for a novel uncoupled regenerative braking system of three-axle electric bus	123
Analyzing greenhouse gas emissions from municipal wastewater treatment plants using pollutants parameter normalizing method：a case study of Beijing	123
Integrating carbon capture and utilization into the glass industry: Economic analysis of emissions reduction through CO2 mineralization	123
The impact of digitalization on energy intensity in manufacturing sectors – A panel data analysis for Europe	122
A new way of environmentally sustainable manufacturing with assessing transformation through the green deployment of Lean Six Sigma projects	122
Water footprint modeling and forecasting of cassava based on different artificial intelligence algorithms in Guangxi, China	122
Design and performance evaluation of a new green pavement: 100% recycled asphalt pavement and 100% industrial solid waste	122
What promote farmers to adopt green agricultural fertilizers? Evidence from 8 provinces in China	122
P-graph-based synthesis of a wastewater treatment process for heavy metal removal: A nonlinear optimisation with cost and sustainability perspectives	121
Identifying priority conservation areas based on ecosystem services change driven by Natural Forest Protection Project in Qinghai province, China	121
Effect of biochar addition on crop yield, water and nitrogen use efficiency: A meta-analysis	121
Research on carbon asset trading strategy based on PSO-VMD and deep reinforcement learning	121
Tracing China's virtual water trade in global value chain: Participation, characteristics, and inequality	120
Effect of pretreatment methods and doping amount of Enteromorpha on the exhaust purification performance of perovskite catalysts used in underground diesel vehicles	120
Impact of different cargo types on emission rates in road-only and intermodal rail-road transport chains	120
Understanding the cost of soil erosion: An assessment of the sediment removal costs from the reservoirs of the European Union	120
Sometimes linear, sometimes circular: States of the economy and transitions to the future	119
Experimental and numerical study on pyrolysis characteristics of organic impurities in waste salt	119
Sustainable development and economic disasters	119
Public complaints of water pollution: A long-term spatiotemporal analysis in Japan	119
Evaluation of the control effect of bighead carp and silver carp on cyanobacterial blooms based on the analysis of differences in algal digestion processes	118
Hierarchical eco-driving control for plug-in hybrid electric vehicles under multiple signalized intersection scenarios	118
Multi-objective optimization of embodied and operational energy and carbon emission of a building envelope	118
Adsorption of antibiotics from wastewater by cabbage-based N, P co-doped mesoporous carbon materials	118
Research on the driving factors and carbon emission reduction pathways of China's iron and steel industry under the vision of carbon neutrality	118
Effect of reactive flexible rejuvenators on thermal-oxidative aging resistance of regenerated SBS modified asphalt	117
A long-term scheduling method for cascade hydro-wind-PV complementary systems considering comprehensive utilization requirements and load characteristics	117
Circular valorization of waste tires using spent fluid catalytic cracking (sFCC) catalyst: sustainable aromatic upgrading and sulfur immobilization	117
Identifying the key drivers in retrieving blue sky during rapid urbanization in Shenzhen, China	117
Sustainability across Borders: which factors influence sustainable footwear Choices? An empirical study on Italian and Dutch consumers	116
Life cycle assessment of alternative fuel production by co-pyrolysis of waste biomass and plastics	116
Impact of functional group types in ion exchange resins on rare earth element recovery from treated acid mine waters	116
Enabling sustainable agrifood value chain transformation in developing countries	116
To sort or not to sort? – Consumers’ waste behavior in public	116
Life-cycle analysis of recycling of post-use plastic to plastic via pyrolysis	116
Cost-effective recycled resin for digital light processing 3D printing	116
A comprehensive review of interface for semi-flexible pavement: Research methods, influencing factors, and anti-cracking strategies	116
Global future onshore wind energy droughts intensify under climate change	116
Environmental and economic assessment of carbon capture and utilization at coal-fired power plant in Thailand	116
Regionalized characterization factors for microplastic emissions in life cycle assessment considering multimedia fate modelling	115
Sustainability in the boardroom: A systematic review	115
Renewable energy communities in rural areas: A comprehensive overview of current development, challenges, and emerging trends	115