Proceedings of the Institution of Civil Engineers-Structures and Build

Papers
(The median citation count of Proceedings of the Institution of Civil Engineers-Structures and Build is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-06-01 to 2026-06-01.)
ArticleCitations
Structures and Buildings: Referees 202218
Evaluation of rocking motion on the seismic performance of a linked column frame system17
Briefing: ICE London meeting held on 17 September 2024: lessons learnt from the new London museum15
The numerical and experimental simulation of substandard reinforced concrete columns14
Failure contingency assessment of corroded beams based on structural parameters14
Strengthening mechanism and microstructure of fibre-reinforced coral mortar and concrete13
Axial compression behaviour of small square tubes filled with self-compacting concrete: effect of L/B ratio13
A review of the characteristics and structural behaviour of sandwich panels13
Enhancement in the performance of concrete using a crystalline admixture12
The effect of petroleum products on the behaviour of three types of concrete12
Durability and strength variation due to corrosion in RC beams using brick and stone chips12
Concrete damaged plasticity-based numerical study of flexural, shear and cyclic behaviour of ultra-high-performance fibre-reinforced concrete beams with high-strength steel11
Effect of loss of bond on the behaviour of RC beams under service load conditions10
Torsional strength limitation of reinforced concrete beams10
Cost-oriented fire safety design of urban structures10
Editorial10
Evaluation of traditional deformation limits for segmental tunnels in soft soils9
Performance of precracked prestressed beams repaired with CFRP composites under bending loads9
Briefing: MSc teaching of timber structural analysis8
Buckling behaviour of dented short cylindrical shells retrofitted with CFRP8
Study the effect of high temperature on behavior of R.C. columns8
Experimental parametric analysis and numerical simulation of ultra-high-performance concrete beams with microfibers8
Mechanical model and seismic performance of frames with a self-centring connection8
Coupled FEM–DEM analysis of mountain tunnels subjected to explosion-induced landslide7
Reliability analysis of models for predicting T-beam response at ultimate limit response7
Editorial7
Strengthening of slender webs of steel plate girders using FRP composites7
Editorial7
Experimental study of improved seismic behaviour of eccentrically braced frames by zipper elements6
Briefing: Construction of RC buildings – ICITECH's experience over the last 30 years6
Seismic performance of imperfect unanchored tanks6
‘Rope effect’ mechanism of self-tapping screws as reinforcement on dowel-type connections6
Torsional behaviour of RC box beams strengthened by CFRP under combined shear and torsion6
Full-scale experimental analysis of the flexural behavior of reinforced soil–cement beams6
Probabilistic seismic safety assessment of bridges with random pier scouring6
Editorial6
Lateral torsional capacity of steel beams in different loading conditions by neural network6
Three-dimensional non-linear seismic analysis of asymmetric structures on elastic soil6
Performance analysis of metal straps used as transverse reinforcement in reinforced concrete beams5
Optimal location of acoustic emission sensors for detecting rail damage5
Effect of fly ash content on concrete durability under magnesium sulfate attack and sustained load5
Numerical study of reliability index of structure rehabilitated with steel shear wall5
Blast response of laminated glass panels: a critical review of analysis and design methods5
Blast resistance of RC columns for varied detonation scenarios: Effect of shear detailing5
Three-dimensional modelling and virtual reconstruction for the preservation of intangible cultural heritage5
Mechanical behaviour of glass fibre-reinforced polymer-reinforced steel–polyvinyl alcohol hybrid fibre concrete columns5
Extraction of wavelet-based damage-sensitive features for concrete moment-resisting frames5
Response modification factor evaluation for vertically irregular MRF buildings5
Evaluating performance of large language models on fundamental structural knowledge5
Editorial5
A theoretical model for estimating the flexural stiffness of CHC joints5
Flexural behaviour of steel–concrete–steel beams with one-end welded box-profile connectors: effect of overlap ratio5
Modelling a steel-plate girder bridge strengthened with carbon-fibre reinforced polymer5
Lower carbon dioxide cements and concretes: Bringing new materials into UK industrial use5
Fine analysis and size optimisation of spherical hinge in swivel construction4
Flexural strength of steel girders with perforated web and tubular compression flange4
The engineering legacy of the FIFA World Cup Qatar 2022: Lusail Stadium – the games’ centrepiece4
Performance of honeycomb sandwich structure under combined blast and impact of fragments4
Cyclic behavior of high-performance concrete columns reinforced with hybrid-GFRP bars4
Editorial4
Mechanical behavior of sheathing-to-framing connections in laminated bamboo lumber shear walls4
Experimental study on the bonding between corrosion-damaged stainless steel bars and concrete4
Structural analysis and sustainable solution for Spanish Baroque domes4
Research on the intelligent construction of prefabricated building based on digital twin4
Simplified design approaches for panel zones in steel special moment frame buildings4
Editorial4
A path to more versatile code provisions for slab deflection control4
Impact-induced vibration effects on the real dynamic behaviour of cable-stayed bridges4
Soil–structure interaction effects on seismic and fatigue response of hybrid wind turbine4
Seismic behaviour of concrete bridge piers with various types of transverse reinforcement3
Cyclic response and failure mode of two-segment replaceable shear link using LYP160 steel3
Numerical analysis of bonding interface of basalt fibre-reinforced polymer and concrete3
Editorial3
Theoretical calculation and test of airborne sound insulation for wooden building floor3
Comparing responses of special and intermediate moment frames under repeated earthquakes3
Dynamic response and safety assessment of propylene tower subjected to blasting vibration3
Editorial3
Flexural behaviour of steel–concrete composite beams with molybdenum tailings: test and finite-element analysis3
Structures and Buildings : Reviewers 20253
Dynamic monitoring of a tunnel-like masonry structure using wireless sensor networks3
The engineering legacy of the FIFA World Cup Qatar 2022TM: Al Thumama Stadium3
Editorial3
Wind effects on large cooling tower in velocity fields of different non-stationary levels3
Effect of wall sheathings on seismic behaviour of phosphogypsum-filled CFS shear walls3
Editorial3
Behaviour of reinforced concrete beams subjected to corrosion damage under cyclic loading3
Nano steel: a futuristic material for civil infrastructure3
Demountable reinforced concrete slabs using dry connections3
Seismic performance of reinforced concrete column section with crimped steel fibre: a parametric study3
Soft computing-based prediction models for interference effect of twin C-shape tall building3
Editorial3
Design and vibration mitigation performance of scissor-amplifying nodal damper3
Establishing automatic coating paths: empirical study for steel component production3
A simplified approach for local buckling in metal-faced profiled sandwich panels3
Effect of concrete workability on bond properties of steel rebar in pre-cracked concrete3
Response of confined masonry with crumb rubber–fly ash bricks under cyclic loading3
The adhesion strength of fibre-reinforced repair concrete under hot coastal conditions3
Android-based framework for condition assessment of existing RC hospital buildings3
Editorial3
Study of the damage indices of concrete members reinforced with high-strength steel3
Editorial3
Optimisation-driven design in the architectural, engineering and construction industry3
Assembly process based on supply chain management of prefabricated houses using BIM3
Simplified method for seismic vulnerability of plan irregular RC buildings using degree of irregularity2
Modal analysis of concrete arch dam–reservoir–massed foundation system in frequency domain2
Study of fire-damaged circular RC columns repaired using composite confinement techniques2
Design optimisation and performance evaluation of single and multiple tuned mass dampers controlling multiple degrees of freedom structures2
Non-linear analysis of one-way concrete slabs with carbon-fibre-reinforced polymer strips2
Corrosion-induced cracking of recycled aggregate concrete beams under static load2
Analysis of seismic performance in semi-dry joint assembled prefabricated shear wall2
Behaviour of reinforced concrete beams having recesses in tension and compression sides2
Shear behaviour of bed joints in ashlar stone masonry walls reinforced with polymer mortar2
Editorial2
Lateral–torsional buckling of high-strength steel I-beams: design, parameter and reliability analysis2
Vulnerability analysis of earthquake-driven blast load on a reinforced concrete structure2
Predicting the uniaxial compressive and tensile strengths of ultra-high-performance concrete using super learner models2
Numerical study on seismic behaviour of buckling-restrained steel plate shear walls2
A closer look at numerical simulation of self-centring steel plate shear walls2
Bond strength of steel bars in steel-fibre-reinforced normal and self-compacting concretes2
Comparing response spectrum analysis and time history analysis for structure–soil–structure interaction on adjacent buildings2
Reserve capacity and vertical extension potential in steel-frame buildings2
Retrofit of concrete columns with fibre strips using grooves and corner battens2
Editorial2
Shrinkage and strength of fibre-reinforced geopolymer using binary and ternary binders2
The engineering legacy of the FIFA World Cup Qatar 2022TM: Al Bayt Stadium2
Wood-fibre composite connectors for roundwood trusses: structure and material2
Flexural properties of concrete-filled, double-skin, square-hollow-section tubular beams2
Editorial2
Assessment of glass fibre-reinforced polymer concrete bond strength after high-temperature exposure2
Energy-based assessment of reinforced concrete walls with two outriggers2
Editorial2
Inflation–forming method and time-varying performance of Tensairity domes2
Investigating criteria for the optimisation of single and multiple tuned mass dampers2
Using steel slag aggregate to strengthen self-compacting concrete durability2
Flexural behaviour of hollow reinforced concrete-filled fibreglass tubular beams2
Numerical simulation of damaged RC half-joint beams: towards appraisal and retrofitting2
Prediction of response of RC multi-span beams through a proposed ANN–FEA model2
Shear strengthening of existing reinforced concrete beams with embedded bars – an overview2
Influence of alkali molarity and recycled aggregates on sustainable geopolymer concrete2
The engineering legacy of the FIFA World Cup Qatar 2022: Ahmed bin Ali stadium – the desert gateway2
Bond behaviour of high-strength steel bars in concrete with steel fibres2
Damage detection under temperature conditions using PCA – an application to the Z24 Bridge2
Mitigating wind suction of a flat roof using small horizontal-axis wind turbine2
The thermo-physical and mechanical properties of cement-based concrete incorporating date pits2
Mechanical properties of axially and eccentrically loaded CFRP–coral concrete columns2
Editorial2
Evaluation of seismic behaviour of strongback brace system with buckling restrained brace2
Editorial2
Structures and Buildings: Referees 20232
Assessment of shear-resisting mechanisms of steel-fibre-reinforced concrete beams2
Flexural behaviour of ECC slabs reinforced with high-strength stainless steel wire rope2
Response and reliability analysis of concrete chimneys under random vortex shedding2
Effect of plastic zone levels on the responses of concrete shear walls subjected to earthquakes2
Design of cold-formed steel lipped channel columns under local–distortional buckling interaction2
Impact of sodium hydroxide molarity on mechanical properties of fly ash–slag-based geopolymer concrete1
Computational design exploration of a segmented concrete shell building floor system1
Out-of-plane behaviour of masonry wall structures strengthened with steel-bar truss system1
Analysing shear strength of reinforced concrete beams using a meso-scale finite-element method1
Editorial1
Flexural behaviour of stone slabs with prefabricated prestressed CFRP-reinforced stone strips1
Commentary: Reflections on the Turkey–Syria earthquakes of 6 February 20231
Editorial1
Multi-hazard performance evaluation of hillside buildings under earthquakes and landslides1
Influence of rotational speed on the response of rotation construction of a cable-stayed bridge1
Seismic vibration control of suspended ceilings in electronics factories1
Discussion: Recommendations for nonlinear finite element analyses of reinforced concrete columns under seismic loading up to collapse1
Corrosion depth of steel bars in recycled aggregate concrete beams under static load1
Experimental investigation of hysteretic behaviour of non-structural dry gypsum infill walls1
Fibre Bragg grating sensor investigation on bond stress of steel-carbon fibre reinforced concrete1
Embodied carbon, embodied energy and renewable energy: a review of environmental product declarations1
Editorial1
Thermal and mechanical properties of gypsum sandwich-panels with phase change material1
Repair of a single pier of a continuous-curved-beam bridge with polyurethane cement1
The climate is right for a fundamental change in civil engineering education1
Editorial1
Influence of additives on the structural performance of cement-stabilised rammed earth1
Blast-induced damage in reinforced concrete buildings: effect of pulse shape variations1
Flexural performance of spliced composite slim beam with slotted web1
Editorial1
Pearl millet waste reinforced biocomposite ceiling tiles: a waste management approach1
Beam theory – a proposed alternative basis for RC design1
Post-fire performance of slag-based geopolymer concrete exterior beam–column joint1
Earthquake-induced energy response of reinforced concrete dual-system tall buildings1
Multihazard response of unbonded fibre-reinforced elastomeric isolator-isolated structures1
Multi-hazard analysis of a reinforced concrete structure under blast and post-blast fire1
Enhancing concrete performance with steel slag aggregate: an experimental investigation1
Finite-element analysis on beam–column joints with replaceable energy-dissipation plates1
Strength and ductility design of flexural members as per both generations of Eurocode 2 Part 1-11
The engineering legacy of the FIFA World Cup Qatar 2022TM: Stadium 974 – reuse as driving force for sustainability1
Durability and ultimate performance of concrete beams with epoxy-coated reinforcing bars1
Influence of aggregate gradation on the performance of fibre-reinforced pervious concrete1
Behaviour of an all-steel buckling-restrained brace with restrained web under cyclic loads1
Sensitivity of reinforcement spatial variability in concrete slabs for deflection serviceability1
Strut-and-tie models obtained by way of topological optimisation1
Editorial1
Torsional strengthening of reinforced concrete hollow beams with stainless steel wire mesh1
Seismic and axial compression performance of insulated concrete sandwich wall1
Editorial1
Seismic performance of steel staggered truss framing structure under strong seismic effects1
Publisher’s note1
Low-cycle fatigue analysis of a new type of reduced-beam-section connection1
Effect of loss of bond on flat-slab building collapses1
Damping ratio of stay cable attached with viscous damper and high-damping rubber damper1
Editorial1
Staged-construction shrinkage in high-rise reinforced concrete buildings1
Editorial1
Automated code compliance checking through building information modelling1
Macro joint model for progressive collapse analysis of L-shaped CFST column frames1
Evaluation of concrete–steel interfaces in steel tubes filled with chipped rubber–concrete1
Editorial1
Analysis of axially loaded columns strengthened with fibre-reinforced polymer1
Editorial1
Flexural behaviour of prestressed reinforced concrete beams strengthened with carbon plate1
Briefing: A brief commentary on facades: a new form of infrastructure1
Wind tunnel tests on wind loads acting on micro-butterfly windbreak nets1
Behaviour of two-way RC slabs strengthened with ultra fibre-reinforced concrete layers1
Vibration performance assessment of a long-span steel footbridge1
Failure analysis of concrete gravity dam using coupled acoustic–structural analysis1
Damage detection of a cable-stayed footbridge using multiple damage modelling and ANNs1
A numerical study of chloride migration in concrete under electrochemical repair1
Optimising sustainable alkali-activated mortar: experimental work and machine learning predictions1
Editorial1
Performance of variously shaped glass-fibre-reinforced polymer bars in concrete columns1
Multipurpose algorithm to simulate reinforced concrete structures: macro modelling method1
Effect of asymmetric flexural reinforcement ratios on punching shear resistance1
Seismic behaviour of reinforced concrete shear walls with coal gasification ash1
An approximate model for estimating residual reinforcement in corroded reinforced concrete members1
Simulating the passive confinement of rectangular concrete prisms allowing for size effect1
Strengthening stone beams with prefabricated polymer-reinforced stone plates1
Flexural strengthening of ductile high-performance concrete beam with low reinforcement ratio using glass fibre-reinforced polymer sheets1
Influence of considering substructures on seismic performances of suspen-dome structure1
A systematic review of hybrid passive energy dissipating devices1
Behaviour of thermally shocked RC columns internally confined by auxetic steel wire mesh1
Analysis of concrete columns with high-performance concrete jackets and polymer wraps1
Seismic performance of a ring–beam connecting concrete-filled steel columns with RC frames1
Soil–structure interaction effect on seismic response of controlled asymmetric buildings1
Editorial1
Effects of corrosion on shear behaviour of discontinuous perfobond rib shear connectors1
Development of a new ground motion prediction equation for strong earthquakes in the Iranian plateau1
Modelling non-linear dynamic behaviour of rocking bridge piers with shape memory alloys1
Reliability analysis of structures by iterative sequential sampling based response surface1
Case study on seismic analysis of piled raft foundation for nuclear building in Western India1
Fabrication and characterisation of cement mortar with coconut shell charcoal enriched with calcium oxide1
A bond strength relationship for steel and glass fiber reinforced polymer bars in concrete1
Review on functional fibre-reinforced concrete: properties, applications and advances1
Editorial1
Low-tech steel damper: square tube parts for similar tension/compression bracing behaviour1
3D finite-element analysis of innovative coconut palm stem shaped headed shear connectors1
Axial partial compression of SSC-filled bimetallic tube stub columns: numerical study1
Ultimate strength of light-rail hybrid cable-stayed bridge including concrete tension softening effect1
0.16136407852173