Micron

Papers
(The median citation count of Micron is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-05-01 to 2024-05-01.)
ArticleCitations
Traction force microscopy – Measuring the forces exerted by cells47
Application of Atomic Force (AFM), Environmental Scanning Electron (ESEM) and Confocal Laser Scanning Microscopy (CLSM) in bitumen: A review of the ageing effect42
Prismatic 2.0 – Simulation software for scanning and high resolution transmission electron microscopy (STEM and HRTEM)41
Biosynthesis of zinc oxide nanoparticles using leaf extracts of Alchornea laxiflora and its tyrosinase inhibition and catalytic studies36
Influence of β-phase stability in elemental blended Ti-Mo and Ti-Mo-Zr alloys34
Cardiac function and blood flow hemodynamics assessment of zebrafish (Danio rerio) using high-speed video microscopy27
The effect of microstructure parameters on the residual stresses in the ultrafine-grained sheets26
Advanced micromorphology study of microbial films grown on Kefir loaded with Açaí extract26
Correlative SEM-Raman microscopy to reveal nanoplastics in complex environments25
The effect of microstructure on mechanical properties of corn cob25
3D micromorphology evaluation of kefir microbial films loaded with extract of Amazon rainforest fruit Cupuaçu23
Preparation of nanostructured CoCrFeMnNi high entropy alloy by hot pressing sintering gas atomized powders23
Morphological and mechanical changes induced by quercetin in human T24 bladder cancer cells20
Effect of Zr content on microstructure and mechanical properties of lightweight Al2NbTi3V2Zrx high entropy alloy20
Effect of CeO2 on the microstructure and microhardensss of laser-cladded Ni60 on 35CrMoV alloys19
Finite-difference Time-domain (FDTD) Optical Simulations: A Primer for the Life Sciences and Bio-Inspired Engineering19
Comparison of microscopic techniques to study the diversity of the bitumen microstructure19
Characterization of the microstructure and hardness of case-carburized gear steel19
Mechanism of pitting corrosion induced by inclusions in Al-Ti-Mg deoxidized high strength pipeline steel19
The Hertzian theory in AFM nanoindentation experiments regarding biological samples: Overcoming limitations in data processing18
Spatial resolution in transmission electron microscopy17
Coupling AFM and CLSM to investigate the effect of ageing on the bee structures of bitumen17
Physicochemical and biological characteristics of chitosan/κ-carrageenan thin layer-by-layer films for surface modification of nitinol16
An optimized TEM specimen preparation method of quantum nanostructures15
X-ray imaging techniques for inspection of composite pipelines15
Effects of short- and long-term exposure to cadmium on salivary glands and fat body of soil centipede Lithobius forficatus (Myriapoda, Chilopoda): Histology and ultrastructure15
Low-voltage SEM of air-sensitive powders: From sample preparation to micro/nano analysis with secondary electron hyperspectral imaging14
Mechanism of carbonate mineralization induced by microbes: Taking Curvibacter lanceolatus strain HJ-1 as an example14
Ultra-high strength Al-Zn-Mg-Cu alloys with high zinc content prepared via powder hot extrusion14
Effect of doping and enhanced microstructures of bismuth titanates as aurivillius perovskites14
An overview of microscale indentation fatigue: Composites, thin films, coatings, and ceramics14
ScanEV – A neural network-based tool for the automated detection of extracellular vesicles in TEM images14
Sensory armature and stylets of the mouthparts of Stephanitis nashi (Hemiptera: Cimicomorpha: Tingidae), their morphology and function14
Shortening of electrospun PLLA fibers by ultrasonication14
Microstructure and oxidation behavior of CoCrxCuFeMnNi high-entropy alloys fabricated by vacuum hot-pressing sintering14
Ambient-temperature time-dependent deformation of cast and additive manufactured Al-Cu-Mg-Ag-TiB2 (A205)13
3D surface reconstruction of small height object based on thin structured light scanning13
3D X-ray micro-computed tomography imaging for the microarchitecture evaluation of porous metallic implants and scaffolds13
Microstructural porosity segmentation using machine learning techniques in wire-based direct energy deposition of AA606113
Improved intergranular corrosion resistance of Al-Mg-Mn alloys with Sc and Zr additions13
Automatic identification of cashmere and wool fibers based on microscopic visual features and residual network model12
SEM analysis of sensilla on the mouthparts and antennae of Asian larch bark beetle Ips subelongatus12
3D microstructure reconstruction of nonwoven fabrics based on depth from focus12
Oogenesis in the tardigrade Hypsibius exemplaris Gąsiorek, Stec, Morek & Michalczyk, 2018 (Eutardigrada, Hypsibiidae)11
Plasmonics meets super-resolution microscopy in biology11
Optimization of electrospinning parameters for the production of zein microstructures for food and biomedical applications11
Investigation into morphological and electromechanical surface properties of reduced-graphene-oxide-loaded composite fibers for bone tissue engineering applications: A comprehensive nanoscale study us11
Microscale mechanism of microstructure, micromorphology and Janus wettability of the banana leaf surface11
Benefits of direct electron detection and PCA for EELS investigation of organic photovoltaics materials11
Molecular characteristics of proteins within the mitochondrial Fe-S cluster assembly complex10
Surface termination and stoichiometry of LaAlO3(001) surface studied by HRTEM10
Complex dielectric function and opto-electronic characterization using VEELS for the lead-free BCZT electro-ceramic perovskite10
Is it mathematically correct to fit AFM data (obtained on biological materials) to equations arising from Hertzian mechanics?10
Grain-surface microtextures in deposits affected by periglacial conditions (Abalakh High-Accumulation Plain, Central Yakutia, Russia)10
Effect of ball milling process on the mechanical and thermal properties of the nanodiamond/2024Al composites10
Effect of Co on the microstructure and oxidation behavior of CoxCrCuFeMnNi high entropy alloy powders10
Optimizing broad ion beam polishing of zircaloy-4 for electron backscatter diffraction analysis9
Can insecticide-free clean water regenerate the midgut epithelium of the freshwater shrimp after dimethoate treatment?9
Filamentous target segmentation of weft micro-CT image based on U-Net9
Electron microscopy study of carbides precipitated during destabilization and tempering heat treatments of 25 wt.%Cr-0.7 wt.%Mo high chromium cast irons9
Precipitation and transformation of σ phase in a selective laser melted high-chromium superalloy subjected to heat treatment9
Characterization of extracellular vesicles by flow cytometry: Challenges and promises9
Comparative microscopic examination of scales in 21 clupeid species from the Caspian Sea and the Indo-Pacific regions9
Computational fluid dynamics simulation from microCT stacks of commercial biomaterials usable for bone grafting9
Effect of external stress on the microstructure and mechanical properties of creep-aged Al-Cu-Li-Ag alloy9
Verification of water presence in graphene liquid cells9
New method of structural analysis and measurement of V-shaped percussion cracks in quartz sands surface by confocal laser scanning microscope (CLSM)9
Quantitative analysis methods for studying fenestrations in liver sinusoidal endothelial cells. A comparative study9
Pore scale image analysis for petrophysical modelling9
Three-Dimensional Exploration of Soft-Rot Decayed Conifer and Angiosperm Wood by X-Ray Micro-Computed Tomography8
Guide to controlling the electron dose to improve low-dose imaging of sensitive samples8
Surface treatment and electron backscatter diffraction (EBSD) analysis of the body-centered cubic phase in Mg-Li based alloys processed by severe plastic deformation8
Electron beam-induced crystallization of Al2O3 gate layer on β-Ga2O3 MOS capacitors8
Observation and characterisation of macrophages in zebrafish liver8
Investigation of phase transition employing strain mapping in TT- and T-Nb2O5 obtained by HRTEM micrographs8
Indentation-derived creep response of cast and laser powder bed fused AlSi10Mg alloy: Air temperature8
Effect of crystallographic orientation on atom probe tomography geochemical data?8
Scanning acoustic microscopy investigation of weld lines in injection-molded parts manufactured from industrial thermoplastic polymer8
A new structure of decision tree based on oriented edges gradient map for circles detection and the analysis of nano-particles8
Osteon circularity and longitudinal morphology: Quantitative and qualitative three-dimensional perspectives on human Haversian systems7
The effects of hot forging on the preform additive manufactured 316 stainless steel parts7
Extracting Three-dimensional Information from SEM Images by Means of Photogrammetry7
Effect of pre-strain on microstructure and micro-yield properties of Al-Cu-Li alloy7
Simulation and analysis of variable numerical aperture wide-field microscopy for telecentricity with constant resolution7
An automated vertical drift correction algorithm for AFM images based on morphology prediction7
Image analysis of PVC / TiO2 nanocomposites SEM micrographs7
Residual-based pattern center calibration in high-resolution electron backscatter diffraction7
Optically active organic and inorganic nanomaterials for biological imaging applications: A review7
Morphological characterization of antennal sensilla of Earias vittella (Fabricius) (Lepidoptera: Nolidae)7
X-ray microtomography as a new approach for imaging and analysis of tumor spheroids6
The sperm structure of the diving beetles Stictonectes optatus (Seidlitz, 1887) and Scarodytes halensis (Fabricius, 1787) (Dytiscidae, Hydroporinae) with evidence of a spermatostyle in the sperm conju6
Secretion mechanism and adhesive mechanism of diatoms: Direct evidence from the quantitative analysis6
Optimizing energy dispersive X-Ray Spectroscopy (EDS) image fusion to Scanning Electron Microscopy (SEM) images6
Image-analysis based readout method for biochip: Automated quantification of immunomagnetic beads, micropads and patient leukemia cell6
Learning-based defect recognition for quasi-periodic HRSTEM images6
Review on the applications of atomic force microscopy imaging in proteins6
Sample preparation for analytical scanning electron microscopy using initial notch sectioning6
Morphology and surface characteristics of the anamorphic stage of powdery mildew Erysiphe australiana on crape myrtle leaves6
Hydrothermal-aging-induced lattice distortion in yttria-stabilized zirconia using EBSD technique6
Confocal laser scanning microscopy study of intercellular events in filopodia using 3-mercaptopropoinc acid capped CdSe/ZnS quantum dots6
Functional analyses of chitinolytic enzymes in the formation of calcite prisms in Pinctada fucata6
A study of mechanical properties and WEDM machinability of spark plasma sintered ZrB2–B4C ceramic composites6
Microscopical observations of crystal deposits on the epidermis of leaves of Agave potatorum5
3D-printed multisampling holder for microcomputed tomography applied to life and materials science research5
Dysfunction of endothelial cells exposed to nanomaterials assessed by atomic force spectroscopy5
Development of decellularized aortic scaffold for regenerative medicine using Sapindus mukorossi fruit pericarp extract5
Ovary cord micromorphology in the blood-sucking haemadipsid leech Haemadipsa japonica (Hirudinida: Arhynchobdellida: Hirudiniformes)5
Transmission electron microscopy of thick polymer and biological specimens5
Spermatozoa ultrastructure of two basal pilidiophoran nemerteans, Hubrechtella juliae and Sonnenemertes cantelli (Nemertea, Pilidiophora)5
Investigation of microstructure evolution and martensite transformation developed in austenitic stainless steel subjected to a plastic strain gradient: A combination study of Mirco-XRD, EBSD, and ECCI5
Accurate quantification of phosphorus intergranular segregation in iron by STEM-EDX5
Endothelial glycocalyx detection and characterization by means of atomic force spectroscopy: Comparison of various data analysis approaches5
Tensile creep behavior and mechanism of CoCrFeMnNi high entropy alloy5
S. aureus and E. coli change the force and work of adhesion between P- and E-selectins of endothelial cells and ligands of neutrophil granulocytes5
Applications of a novel electron energy filter combined with a hybrid-pixel direct electron detector for the analysis of functional oxides by STEM/EELS and energy-filtered imaging5
Synthesis of core-shell Ti@Ni-P spherical powder by Ni electroless plating5
Antennal morphology and sensilla ultrastructure of Ascia monuste (Linnaeus) (Lepidoptera: Pieridae)5
Determining the physical properties of polymer in different admixtures used for self-compacting cement paste by ESEM5
Influence of ball milling process on microstructure, mechanical and thermal expansion properties of ZrMgMo3O12/Al-40Si composites5
Laser micro/nano machining of silicon5
Simplified and rapid staining of leafhopper salivary sheaths in plant tissues for electrical penetration graph waveform correlations5
Fabrication of (Zr,Ti)B2–ZrN–BN composites through reactive spark plasma sintering of ZrB2 and TiN5
NanoMi: An open source electron microscope hardware and software platform4
Nanoparticle size and 3D shape measurement by electron tomography: An Inter-Laboratory Comparison4
Microscopes, tools, probes, and protocols: A guide in the route of correlative microscopy for biomedical investigation4
Scanning electron microscopy and atom probe tomography characterization of laser powder bed fusion precipitation strengthening nickel-based superalloy4
3D electron diffraction of mono- and few-layer MoS24
Atomic force spectroscopy is a promising tool to study contractile properties of cardiac cells4
Crystallographic and micro-structural investigations in C-phase spinels of CuFe2O4 synthesized through C12H22O11.H2O mediation4
A study on the morphology of natural microfractures in marine and continental transitional shale based on scanning electron microscopy image4
High-power laser irradiation for high-temperature in situ transmission electron microscopy4
Novel image processing method inspired by wavelet transform4
Analysis of phellinus igniarius effects on gastric cancer cells by atomic force microscopy4
X-ray microtomography applied to mortars: Review of microstructural visualization and parameterization4
Chemical homogeneity and optical properties of individual sodium tungsten bronze nanocubes4
Hyperspectral microscopy of subcutaneously released silver nanoparticles reveals sex differences in drug distribution4
Improved stress corrosion cracking resistance of in-situ TiB2/7050Al composite by pre-precipitation treatment4
Micrometer insights into Nepeta genus: Pollen micromorphology unveiled4
Microstructure and fracture toughness of hot-rolling biomedical degradable ZKX500 magnesium bone plates4
Atomic force microscopy indentation for nanomechanical characterization of live pathological cardiovascular/heart tissue and cells4
Morphology and distribution of antennal sensilla in the gall midge Gephyraulus lycantha (Diptera: Cecidomyiidae)4
The sperm ultrastructure of Pytho depressus (Linnaeus, 1767) (Coleoptera, Pythidae)4
Effectiveness of X-ray micro-CT applications upon mafic and ultramafic ophiolitic rocks4
Multi-scale approach to assess total porosity and pore size in four different kinds of carbonate rocks4
The good, the bad and the ugly polishing: Effect of abrasive size on standardless EDS analysis of Portland cement clinker’s calcium silicates4
Effect of antibiotics on mechanical properties of Bordetella pertussis examined by atomic force microscopy4
Probing the recognition specificity of αβ integrin and syndecan-4 using force spectroscopy4
The cono-dos and cono-dont’s of phosphatic microfossil preparation and microanalysis4
Modifications of the wetting characteristics of electrodeposited porous copper by controlling the plating parameters and storage conditions4
Review: Geometric interpretation of reflection and transmission RHEED patterns4
Improved quantification of immune-gold labeling and its use to compare the distribution of cellular factors among sub-chloroplast compartments4
First finding of tiemannite, HgSe, in human bladder stones: An electron microprobe study4
On the microstructure and texture of intermetallics in Al/Mg/Al multi-layer composite fabricated by Accumulative Roll Bonding4
Application of atomic force microscopy to assess erythrocytes morphology in early stages of diabetes. A pilot study4
Excited state modulation of C70 dimerization in a carbon nanotube under a variable electron acceleration voltage4
Charging effects of SiO2 thin film on Si substrate irradiated by penetrating electron beam4
Investigating microglia during motor neuron degeneration using a zebrafish model4
Extraction of physically meaningful endmembers from STEM spectrum-images combining geometrical and statistical approaches4
MyScope: Free online microscopy training resource – continuing development to reflect the current microscopy landscape4
Manual versus automatic analysis of microglial density and distribution: a comparison in the hippocampus of healthy and lipopolysaccharide-challenged mature male mice4
Progress in the applications of atomic force microscope (AFM) for mineralogical research4
Detailed ultrastructure of the Hirudo (Annelida: Hirudinea) salivary gland3
Trophobiotic organ and perianal structures in aphid genus Stomaphis WALKER (Aphididae, Lachninae)3
Synthesis of gold decorated silica nanoparticles and their photothermal properties3
Crystalline defect analysis in epitaxial Si0.7Ge0.3 layer using site-specific ECCI-STEM3
FFT pattern recognition of crystal HRTEM image with deep learning3
An efficient Fourier ptychographic microscopy method based on optimized pattern of LED angle illumination3
Foliar micromorphology, ultrastructure and histochemical analyses of Tagetes minuta L. leaves3
Adaptive AFM imaging based on object detection using compressive sensing3
Evaluation of TEM methods for their signature of the number of layers in mono- and few-layer TMDs as exemplified by MoS2 and MoTe23
Three-sectioning method: A procedure for studying hard tissues and large pieces under light and electron microscopy3
Ultrastructure of the larval eyes of the hangingfly Terrobittacus implicatus (Mecoptera: Bittacidae)3
Detection of Si doping in the AlN/GaN MQW using Super X – EDS measurements3
Morphological, anatomical, ultrastructural, and histochemical study of flowers and nectaries of Iris sibirica L.3
Experimental research on influence of gas adsorption on secondary electron emission of copper surface3
X-ray tomography analysis reveals the influence of graphene on porous morphology of collagen cryogels3
Unique spectral characteristics of natural-color Edison pearls cultured in Hyriopsis cumingii, and its formation mechanisms3
Deep learning-based classification of microalgae using light and scanning electron microscopy images3
Spatio-temporal segmentation of image sequences for non-invasive analysis of cardiovascular structure and function in Whitefish embryos3
Structure and function of the periostracum in the bivalve Perna viridis3
Microstructural correlation of cross rolling temperature of AT55 magnesium alloy in mechanical and formability behaviour3
Ultrastructure of phytoplasma-infected jujube leaves with witches’ broom disease3
Morphological diversity of the metathoracic spiracle in the Lygaeoidea (Hemiptera: Heteroptera)3
Quantitative FIB/SEM tomogram analysis of closed and open porosity of spheroidized graphite anode materials for LiBs applications3
Size-dependent and sex-specific negative effects of micro- and nano-sized polystyrene particles in the terrestrial invertebrate model Drosophila melanogaster3
Effect of tuned elasticity and chemical modification of substrate on fibrotic and healthy lung fibroblasts3
Characterization of the boron profile and coordination in altered glass layers by EEL spectroscopy3
Foliar microstructure and histochemical analysis of the lavender tree (Heteropyxis natalensis Harv.)3
Visual adaptability and retinal characterization of the Egyptian fruit bat (Rousettus aegyptiacus, Pteropodidae): New insights into photoreceptors spatial distribution and melanosomal activity3
Generative design of bioinspired wings based on deployable hindwings of Anomala Corpulenta Motschulsky3
Electron holography for observing magnetic bubbles and stripe-shaped domains in magnetic fields3
Electron irradiation effects in transmission electron microscopy: Random displacements and collective migrations3
Colloid-SEM method for the investigation of magnetic domain structures3
High-resolution imaging and fast number estimation of suspended particles using dewetted polymer microlenses in a microfluidic channel3
Combined effects of wrinkled vein structures and nanomechanical properties on hind wing deformation3
A method of using Si L-edge for O/Si and N/Si quantitative ratio analysis by electron energy loss spectroscopy (EELS)3
Microanalysis of scale morphology in killifish, Aphaniops hormuzensis inhabiting ecologically diverse environments (Cyprinodontiformes; Aphaniidae)3
Wire electrical discharge machining and microstructural analysis of hot-pressed boron carbide3
Integrin α2β1 as a negative regulator of the laminin receptors α6β1 and α6β43
Teeth resorption at cement - enamel junction (CEJ) - Microscopy analysis3
Evaluating fidelity of CT based 3D models for Zebrafish conductive hearing system3
In vitro effect of high glucose concentrations on erythrocyte morphology assessed by scanning electron microscopy3
Accuracy of a reference-free Monte Carlo approach for SEM-EDS thickness assessment of TiN coatings onto diverse substrates2
Correlating whole sample EDS and Raman mappings – A case study of a Chelyabinsk meteorite fragment2
Fast determination of sample thickness through scanning moiré fringes in scanning transmission electron microscopy2
Modelling energy deposition in polymethyl methacrylate with low-energy electron irradiation2
Micro-CT and SEM investigation of sound absorption structure and chambers in the otoliths of Giant Panda fish species - Chinese Bahaba (Bahaba taipingensis)2
Effect of site geometry on oxygen K, and silver and gallium L2,3 energy loss spectra of AgGaO2 polymorphs: A DFT study2
Microscopic study on the effect of nano-clay-particles on wear behaviors of piston aluminum-silicon alloy under various forces and speeds2
The combination of Raman microscopy and electron microscopy – Practical considerations of the influence of vacuum on Raman microscopy2
An alternative approach to tracing the volumic proliferation development of an entire tumor spheroid in 3D through a mini-Opto tomography platform2
Insights into spermatogenesis in the migratory locust, Locusta migratoria (Linnaeus, 1758) (Orthoptera: Acrididae), following histological and ultrastructural features of the testis2
STEM-EELS investigation of c-Si/a-AlO interface for solar cell applications2
Host blood proteins as bridging ligand in bacterial aggregation as well as anchor point for adhesion in the molecular pathogenesis of Staphylococcus aureus infections2
“Round, red globules floating in a crystalline fluid” – Antoni van Leeuwenhoek’s observations of red blood cells and hemocytes2
Nanoscale insight into biochemical changes in cervical cancer cells exposed to adaptogenic drug2
Preparation and properties of SiC/SiOX heterojunction fiber reinforced porous SiC composite materials2
Micro-computed tomography for analysis of heavy metal accumulation in the opercula2
Algorithm to determine orientation distribution function from microscopic images of fibrous networks: Validation with X-ray microtomography2
Peltier cooling for the reduction of carbon contamination in scanning electron microscopy2
Micromorphology of the leaf surface in some species of Dryadoideae (Rosaceae)2
Combined stereomicroscope and SEM disentangle the fine morphology of the undescribed larva and puparium of the hoverfly Milesia crabroniformis (Fabricius, 1775) (Diptera: Syrphidae)2
TEM based applications in solid state nanopores: From fabrication to liquid in-situ bio-imaging2
Spatial resolution of drug crystallisation in the skin by X-ray micro-computed tomography2
Quantification of plasmodesmata frequency under three-dimensional view using focused ion beam-scanning electron microscopy and image analysis2
Automontage microscopy and SEM: A combined approach for documenting ancient lice2
Micrometre-scale strain mapping of transistor arrays extracted from undersampled atomic-resolution images2
Elemental mapping of human teeth enamel, dentine and cementum in view of their microstructure2
Observation of the fine structure of antennal sensilla of the stink bug, Eocanthecona furcellata (Hemiptera: Pentatomidae)2
Sperm ultrastructure and spermatogenesis in the Japanese beetle Popillia japonica (Coleoptera, Scarabaeidae)2
Exploring the effects of graphene and temperature in reducing electron beam damage: A TEM and electron diffraction-based quantitative study on Lead Phthalocyanine (PbPc) crystals2
Examination of embolisms in maple and birch saplings utilising microCT2
Transmission electron microscopy of precipitation in fine-grained heat-affected zone of Grade91 steel weld during creep exposure2
Higher-order structure of barley chromosomes observed by electron tomography2
Multi-scale microscopy study of 3D morphology and structure of MoNi4/MoO2@Ni electrocatalytic systems for fast water dissociation2
Direct estimation and correction of residual aberrations in the reconstructed exit-wavefunction of a crystalline specimen2
A microscopy investigation of the complex problem of infertility of insect hybrids. Studies on the reproductive systems, eggshells, and karyotypes of the representatives of the genus Platymeris (Heter2
Automated segmentation and morphological characterization of placental intervillous space based on a single labeled image2
In-situ observation of lateral AlAs oxidation and dislocation formation in VCSELs2
The oxidation behavior of the CrFeCoNiAlx (x = 0, 1.0, and 5.0 wt%) high-entropy alloy synthesized with Al elemental powder via powder bed fusion technique at high temperatures2
Sperm structure of the diving beetle Deronectes moestus incospectus (Leprieur, 1876) (Hydroporinae, Dytiscidae) and considerations on extracellular material surrounding sperm bundles2
Comparison of nanostructure and nanomechanical properties of cast and air sides of polyimide films from different manufacturers2
Effect of self and extrinsic encapsulation on electron resilience of porous 2D polymer nanosheets2
Carbon K edge spectra of functionalized molybdenum-based MXenes, Mo2CT2 (T = F, OH and O), from first-principles calculations2
The effect of annealing on optical transmittance and structure of ZLANI fluorozirconate glass thin films2
Colleters in leaves of Mespilus germanica L. (Rosaceae): Micromorphology, histochemistry and fluorescence2
Combined beam hardening artifact correction and quantitative microanalysis of colloidal depositions in deep bed filtration experiments investigated by 3D X-ray computed microtomography2
A practical guide to characterizing irradiated nuclear fuels using FIB tomography2
Background subtraction in electron Compton spectroscopy2
0.062934160232544