MAPAN-Journal of Metrology Society of India

Papers
(The median citation count of MAPAN-Journal of Metrology Society of India is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Traceability of Total Spectral Radiant Flux (TSRF) Scale Using Spectral Irradiance and Total Luminous Flux Scale at CSIR-NPL, India53
DMD Based Microscopic Fringe Projection Profilometry of Copper-Clad Substrates48
Developed Method to Evaluate Some Optical Parameters in Gauge Block Measurements Using Ellipsometry45
Experimental Measurement of Structural Static and Dynamic Characteristics of Glass/Banana Hybrid Composite23
Significance of Metrological Tools in an ISO 17025 Accredited Quality System for a Biological Evaluation Facility19
Efficiency Measurement of Organic Solar Cells: Step-by-Step Protocol to be Followed15
Preparation of Indigenous Radioactive Air Filter Standard for Gamma Spectrometry14
Estimation of Reference Gamma Radiation Field for Calibration of Radiation Monitors14
A Bidirectional Algorithm for Evaluation of Straightness Error14
Application of Statistical Parameters to Analyse the Performance of PWM Techniques in 3-Level Inverter-Based Compensator for Power Quality Improvement12
Research on Material Outgassing Measurement System with an In-Situ Calibration12
Development of Monodispersed Polystyrene Particles as Thailand Reference Materials (TRM)11
Design and Implementation of Rectangular Dielectric Resonator Antennas for GPS-Based Toll System11
Respiratory Deposition Dose of PM2.5 and PM10 Before, During and After COVID-19 Lockdown Phases in Megacity-Delhi, India10
A Laser Based Universal Oscillator for Next Generation Optical Frequency Standards10
Measurement and Evaluation of Sound Absorption Characteristics of Auditorium and Office Seats for Prioritizing Efficacious Acoustics in Auditoriums, Halls and Meeting Rooms10
Range Extension down to 1 mL/h of Micro Liquid Flow Calibration Facility at CSIR-NPL, India10
Analysis of Shapes of Centrifugal Force-Generating Rod in Centrifugal Force-Assisted Abrasive Flow Machining Process9
Prediction of Tropospheric Amplitude Scintillation for Accurate Design of Earth-Space Communication Link over Akure, Nigeria9
Development of CRM for Quality Assurance of Cement8
Sound Absorption Behaviour of Vetiver Grass Fibre-based Manufactured Pine Board8
A New Technique for Volumetric Soil Moisture Evaluation Using Geostationary Satellite8
Estimation of Elastic Constants Using Numerical Methods and Their Validation Through Experimental Results for Unidirectional Carbon/Carbon Composite Materials8
Assessment of Dose Rates to Non-human Biota of Terrestrial Environment around Kaiga Generating Station, Kaiga7
An International Bilateral Inter-Laboratory Temperature Comparison Measurement7
Estimating the Statistics of Non-Uniform and Time-Varying Distributed Parameter Fluctuations in a Transmission Line7
Correction: Review on Classification, Sources and Management of Road Dust and Determination of Uncertainty Associated with Measurement of Particle Size of Road Dust7
Finishing and Wear analysis of 3D-Printed Workpiece Through Centrifugal Force-Assisted Abrasive Flow Machining7
Measurement of Mechanical Properties of Friction Stir Welding of Al–Li alloy under different environmental conditions7
Second-Order Correlation Measurement for Single-Photon Metrology7
Ambient Radiological Condition around an Operating Uranium Mill Tailings Disposal Facility at Turamdih, India7
Long-Term Stability Analysis for Measurement Class of Phasor Measurement Unit at CSIR-NPL7
Evolution of national standards of capacitances at CSIR-NPL over the last 50 years6
Evolution of Analytical Methods for Radon Measurement in India6
Influence of Temperature and Relative Humidity on PM2.5 Concentration over Delhi6
Reverse Manufacturing and 3D Inspection of Mechanical Fasteners Fabricated Using Photopolymer Jetting Technology6
Accuracy of Temporal Sampling Strategies for the Estimation of the Annual Average Equivalent Noise Levels in Urban Scenario6
Research on Metrological Detection Device for Ultrasonic Sensor for Evaporation Measurement6
Development of a Non-contact Respiratory Rate Measurement Method Considering Introduction of Rapid Response Systems6
Two-Element UWB Antenna with Multiple Open Slots in Fountain-Shaped Ground for Wearable and Biomedical Applications5
Optimizing Image Quality and Reliability Through Chunking Fusion and Wavelet Transform5
PM2.5 Observations of Outdoor and Indoor Environment at Dwarka, New Delhi, India5
Tribological Performance of Aluminium Metal Matrix Hybrid Composites5
Development of an Adjustable Pulse Measurement System for Determining the Precise Position for Recording High Wrist Pulse Signals5
SODAR Based Meteorological Sensor Network for Air Pollution Monitoring in Northern India5
Assessment of Air Quality Before and During COVID-19-Induced Lockdown in Jaipur, India5
Design of a Triple-Layered Plasmonic Biosensor for Glucose Monitoring from Urine Sample for DIABETES Prevention5
Interlaboratory Comparison of Vacuum Pressure Gauge Calibration Across Public Institution Branches5
Improved Design of Thread Plug Gauge for Easiness in Calibration and Accessibility4
Study of Interfacial Tension of Distilled Water Using Pendant Drop Method4
Spatial and Temporal Variations of Air Pollutants in Urban Agglomeration Areas in Gujarat, India During 2004–20184
Analysis of Radionuclide Partitioning at Various Stages of Processing of Ilmenite Ore Using HPGe Gamma-Ray Spectrometry4
Realization of ITS-90 Radiance Temperature Scale from 961.78 °C to 3000 °C at CSIR-NPL4
The UKQI: Status and Importance for National Growth4
The Study of Metrological Comparison of Reference Materials at Multiple Levels of Quantity Value4
Production and Certification of Toxic Metal-Induced Basmati Rice: An Indigenous Cultivated Rice CRM/BND4
Health Risk Assessment, and Seasonal Radon-Thoron Concentrations of Water Samples in Kahramanmaras Sutcu Imam University, TURKEY4
Measurement, Evaluation, and Performance of 60 Gbps DPSK WDM Free Space Optical Link for Haze and Rain Conditions4
Preparation, Verification and Stability of Calibration Gas Mixture of Benzene in Nitrogen4
Bilateral Comparison of Radiation Temperature Measurements from − 20 to 1600 °C Between TUBITAK-UME (Turkey) and SASO-NMCC (Kingdom of Saudi Arabia)4
Variations and Source Apportionment of PM2.5 and PM10 Before and During COVID-19 Lockdown Phases in Delhi, India4
Novel Remote Calibration Method of Length Value: Based on Optical Fiber Information Transmission4
Interferometric Imaging Ellipsometer for Characterizing the Physical Parameters of a Grown Oxide Layer4
Characterisation of Indoor Volatile Organic Compounds and Its Association with Respiratory Symptoms Among Children Living in Solid Fuel Using Households in Tamil Nadu, India4
Performance Evaluation of FPGA-based Standalone, Portable TDCR System4
Design Study of Double Parallel Beam Cutting Force Sensor4
Development of High-Pressure Transducer: Design, Finite Element and Experimental Analysis4
Study of Ground-Based and CERES-Retrieved Solar UVA and UVB Radiations Over Different Stations in India3
Measurement and Compensation of Voltage Sag Employing open-loop Single-Phase Dynamic Voltage Restorer3
Evaluation of calibration efficacy for negative temperature coefficient thermistors in marine thermal environments3
International Bilateral Inter-laboratory Comparison Measurements Between Public Institutions for Dry-Block Calibrator and Thermometer Calibrations3
Variations and Inter Relationship in Mid-tropospheric Carbon Dioxide, Temperature and Water Vapour Using AIRS Observations3
Experimental Investigation on Machinability and Geometric Tolerance in Die-Sinking EDM of Microholes and Channels3
Design and Testing of SMPS in Accordance with IEC 61000-4-11 Standard with Measurement Uncertainty3
Technique of Controlling the Bandwidth of MIMO Rectangular Dielectric Resonator Antenna3
Feasibility Study of Uranium Mill Tailings as Construction Material by Making Bricks and Assessment of Its Radiological Significance3
Method Validation of Gas Chromatography and Stability Study for Analysis of Standard Gas Mixtures of Carbon Dioxide in Nitrogen Matrix3
Evaluation and Improvement of a Transformerless High-Efficiency DC–DC Converter for Renewable Energy Applications Employing a Fuzzy Logic Controller3
Commissioning NIS 1 kN·m Primary Torque Standard Machine3
Evaluation and Analysis of Environmental Noise Levels in NCT of Delhi, India3
Phthalate Esters from Packaged Milk and Associated Human Health Risk: A Monte Carlo Probabilistic Simulation Approach3
Applicability of Metrology 4.0 Technologies for the Manufacturing Industries3
Measurement Uncertainty of Chromatographic Analyses: A Comparative Study on the Role of Reference Materials3
Methodology for Precisely Determining Ionosphere Travelling Disturbances Using NavIC3
Development of Am-241 Activity Standards3
Investigating DC Characteristics in Testing Precision Current Shunts for Steady State3
Design and Implementations of Pigeon’s Away Electronic System3
A Compact Wind Tunnel for Calibrating Anemometers Used for Indoor Airflow3
Monostatic Radar-Based Microwave Imaging of Breast Tumor Using an Ultra-wideband Dielectric Resonator Antenna (DRA) with a Sierpinski Fractal Defected Ground Structure3
Solar PV System and Battery-operated DSTATCOM for Power Quality Enhancement: A Review2
Effect of Seasonal Variations on Environmental Noise Levels in Urban Zones: A Case Study in Delhi City, India2
Identification of Carbonaceous Species and FTIR Profiling of PM2.5 Aerosols for Source Estimation in Old Delhi Region of India2
Investigating the Impact of OIML Weights Used as Reference on Mass Determination of Pressure Balances’ Disk Weights2
Calibration Method and Uncertainty Evaluation of 2θ Angle for X-Ray Diffractometer2
Correction to: A TCAD Approach to Analyze the Performance of Dual Gate Dielectric Modulated Vertical Tunnel Field Effect Transistor Based Biosensor2
Development of an Innovative Algorithm for Accurate Measurement of Human Blood Pressure2
Development of the Primary Standard for IAEA TRS-457 at OAP, Thailand2
Exploring the Timing Performance of a Geodetic GNSS Receiver in GPS-Only Mode2
Adopted Climatic Chamber Solar Simulator for Testing Solar Radiation Effects on Electricity Meters at NIS2
Establishment of SI Traceability and Certification of CRMs/BNDs of Aqueous Elemental Solutions Produced In-house and Through RMP Under Metrology in Chemistry Programme at NPL, India2
Investigation of Tribological Performance of Composite Nanodiamonds and Graphene Nanoplatelets-Reinforced Alumina Coatings at High Temperature2
An Approach for Reliable Calibrations of Ultra-high Value Resistors with the Dual Source Bridge2
Seasonal Trends and source Apportionment of Carbonaceous Aerosols in PM10 at Central Delhi, India2
Proficiency in Determining 134Cs and 137Cs in Aquatic Samples Using Gamma Spectrometry2
Measuring Model for the Gravimetric Method by Drying in N-Stages Applied to Materials with High Moisture Content2
Investigation of Time-Domain Feature Selection and GMDH Neural Network Application for Determination of Volume Percentages in X-Ray-Based Two-Phase Flow Meters2
Preparation of In-House Calibration Standard Solutions for Mn, Co and Their Assay Using Nuclear Analytical Techniques2
An Overview of Vehicular Emission Standards2
Supervised Machine Learning Based Approach for Early Fault Detection in Polymer Gears Using Vibration Signals2
Stable Isotope Ratio and Elemental Analysis (CNS) in Mangrove Leaves in the Creek Ecosystem: An Indicator of Coastal Marine Pollution2
Failure Mode and Effects Analysis of PCB for Quality Control Process2
Remote Calibration of Sundials of Jantar Mantar Jaipur Rajasthan and its Traceability with IST2
Seasonal Variability in Key Radiological Attributes in U-Processing Plant and Solid Waste Disposal Sites at Jaduguda, India2
Experimental and Numerical Investigations of Formability of Two-Ply Clad Sheet of Stainless Steel and Aluminium Alloy2
Dimensional Metrology: Underpinning the Automotive Sector in an Indelible Fashion2
Development of Nickel–Carbon Eutectic Fixed Point Cell for Thermocouple Thermometry2
Design, Development, and Characterization of Cross Beam Force Transducer for Low Force Measurement2
Performance Analysis and Measurement of Soil Moisture Content by Piezoresistive Sensor2
Indian Standard Time Dissemination Using Precision Time Protocol: Toward Resilient Time Synchronization Using Optical Fibers for Critical Infrastructure in India2
Improving the Measurement of Volume Fraction of Multiphase Fluids Based on Attenuation of Gamma Rays Without the Use of Artificial Intelligence2
EMC/EMI Compliance for Electromagnetic Field Measurement: An Overview2
Mechanical, Elastic and Microstructural Investigations on HCP Phase High-Entropy Alloys2
Exploring the Interruption-Recovery Pattern of Air Pollutants During the COVID-19 Pandemic in Southern Brazil: An Analysis of the New Normal2
Comparative Seasonal Variability of the Atmospheric Boundary Layer over Gangetic Plain (Varanasi) and Coastal Region (Goa), India2
Evaluation of Different Coatings in Protecting Leather Artifacts in Museums and Libraries from Air Pollution2
Correction to: The Uncertainty Paradox: Molar Mass of Enriched Versus Natural Silicon Used in the XRCD Method2
Sustainability of Industry 6.0 in Global Perspective: Benefits and Challenges2
A Versatile Ultra-Wideband Radio Sensor for Early Stage Detection of Breast Cancer2
Performance Evaluation of a 3D Printed Auxetic Structure Based Acoustic Metamaterial2
Shewhart, CUSUM and EWMA Control Charts: A Comparative Study on Intermediate Check of Balances1
Calibration of Glass Hemisphere and Traceability at CSIR-National Physical Laboratory-India1
Defibrillator Delivered Energy Measurement Study with a Calibration Set Up at Different Trans-Thoracic Impedance1
A Review of Metrological Supervision: Towards the Common Understanding of Metrological Traceability in Legal and Industrial Metrology1
Design of Measuring and Controlling Circuit for Digital Output MEMS Gyroscope with Zero Output Correction1
Slot-Loaded Pentagon Microstrip Patch Antenna for Hyperthermia Application at 434 MHz1
Study on Radioactivity Content in Soil Around Uranium Mineralised Region1
Standardization of 109Cd Using CIEMAT/NIST Method and Internal Conversion Electron Counting1
2.4 GHz Wi-Fi Jammer using Cylindrical Dielectric Resonator Antenna for Prison Applications1
Advance Radiation Metrology Techniques and Related Applications1
Development of a Novel Spectrophotometric Method for Toluene Quantification and Detecting Benzene Amount Fraction as an Impurity in Pure Toluene1
A Novel Stepped-Flower Shaped UWB Frequency Reconfigurable Printed Filtering Antenna Using PIN Diodes with Trackable Notch-Band for Mid-5G Band & X-Band Applications1
A New Approach to Artefact Material Selection for Interim Checks of CMMs that uses MADM Tools1
Optical Noninvasive Temperature Measurement of Molten Melts in Metallurgical Process: A Review1
Comprehensive Performance Evaluation of Phasor Measurement Unit Calibration System at NPLI1
Size Optimization of Grid-Tied Hybrid Energy System by Employing Forecasted Meteorological Data1
Design and Performance Analysis of Graphene Integrated CPW Fed Fractal Antennae for 5G mm-Wave and Ground Based Navigation Applications1
Uncertainty Evaluation of NIS Low Stirred Liquid Bath Blackbody Radiation Source (LSBB)1
The Use of Z-scores in External Performance Evaluation of Inter-comparison Exercises1
Correction to: Development of Monodispersed Polystyrene Particles as Thailand Reference Materials (TRM)1
Evaluation of Humidity Sensor Calibration Uncertainty by Monte Carlo Method1
Assessing the Significance of Relationship Between Metrology Variables under Indeterminacy1
Study of Long-Term Stability of Calibration Coefficient of Therapy-Level Dosimeter and Various Factors Affecting its Stability1
Study on the Influence of Bubbles on the Measurement Results of CTD Conductivity Sensor1
Temporal Analysis of Atmospheric Pollutant Concentrations with Specific Regard to NAAQS Compliance in an Industrial Cluster of New Delhi, India1
Measurement Uncertainty Estimation for the Quantitative Determination of Elemental Impurities in Active Pharmaceutical Ingredients Using Microwave Digestion Followed by ICP-OES According to USP <231
Metrological Perspective of Ultrasonic Pulse Velocity Measurement Technique1
Design and Performance Evaluation of an Open Loop Wind Tunnel at NIS1
Assessment of Metrological Characterization of 30,000 kg Weighing Balance Using a Novel Step-Up Method Expandable up to 50,000 kg1
Enhanced A* Algorithm for the Time Efficient Navigation of Unmanned Vehicle by Reducing the Uncertainty in Path Length Optimization1
Preparation of Colloidal Silica Solution in Various Electromagnetic Fields and Investigation of the Colloidal Solution’s Molecular Structure and Optical Properties1
Design and Evaluation of a 100 kN m Multi-function Torque Standard Machine1
Texture Characterization of Bipolar Hip Joint Medical Implants Using Optical Methods1
Detection of Palm Oil Adulteration in Sunflower Oil Using ATR-MIR Spectroscopy Coupled with Chemometric Algorithms1
Fabrication of Exhaust Fan Cum Micro Wind Turbine and Its Performance Analysis in High-Rise Building Window1
Cylindricity Error Measurement and Evaluation Based on Step Acceleration Algorithm in Crankshaft Measuring Machine1
Design of Wide Angle Optical Receiver with Various Glass Materials1
Calibration of Resistance-Ratio Thermometry Bridges Using an Automated Resistance Bridge Calibrator1
Developing an Algorithm to Improve the Temperature Accuracy of Room Thermostats1
Electromagnetic Acoustic Transducer and Method for Residual Stress Detection in Conducting Materials1
Metrological Innovations for Science, Technology and Global Trade1
Simulating the Dispersion Behavior of Indoor Thoron Using Computational Fluid Dynamics (CFD)1
Optical Wavelength Calibration for Stabilized He–Ne laser 633 nm Using Substitution Method1
A True Science Leader and Metrologists, an Obituary of Dr. Kamal Hossain1
Experimental and Analytical Evaluation of Models for Predicting Sound Absorption Characteristics of Acoustical Materials1
Efficient DER Coordination for Grid Reliability in the Indian Power Sector Under Meteorological and Metrological Variability1
Short-Term Effects: Elemental and Morphological Assessment of Aerosols Over Old Delhi Region, India1
Field Evaluation of an Encapsulated 226Ra–222Rn Source1
A Novel Method for the Calibration of the Displacement Encoder of the Rockwell Hardness Tester1
Evaluation of Tribological and Cooling Performance of TiN and DLC-Coated Pistons for Miniature Stirling Cryocooler1
Measurement of Tool Chatter and MRR Using Sound Signal During Milling of Al 6061-T61
Development of Three-Cup Anemometer Calibrator Using CFD Simulation1
Indigenous Passive Personal Radon (222Rn) Dosimeter for Use in Uranium Mines of India1
A Comparative Analysis of Artificial Neural Network Algorithms to Enhance the Power Quality of Photovoltaic Distributed Generation System Based on Metrological Parameters1
A Review Study of Differences Between Alignment Verification Standards1
An Accurate Fault Identification, Measurement and Protection in Radial Power System Network Using a New Hybrid Bell Algorithm1
Discharge Pulse Analysis Based Machining Responses in Vibration Assisted µEDM Processes1
Measure Right Every Time to Build Quality and Win Customer’s Trust1
Feasibility Study of Radio Xenon Measurement in Environment Using Computational Techniques1
Reconfigurable Microwave Filters for 5G Applications1
A State-of-the-Art Review on the Misalignment, Failure Modes and Its Detection Methods for Bearings1
Preemptive Measure of Spoofing on NavIC Signal1
Correction: Pressure Measurement and Traceability at NIS- Egypt1
Performance Analysis and Environmental Evaluation of a Photovoltaic Thermal (PVT) Air Collector Solar Dryer1
Enhancing Proficiency Testing: Exploring the Innovations in ISO/IEC 17043:20231
Preparation of Holmium Oxide Solution as a Wavelength Calibration Standard for UV–Visible Spectrophotometer1
Summer-Time Monitoring And Source Apportionment Study Of Both Coarse, Fine, And Ultra-Fine Particulate Pollution In Eastern Himalayan Darjeeling: A Hint To Health Risk During Peak Tourist Season1
0.063889980316162