Journal of Wuhan University of Technology-Materials Science Edition

Papers
(The median citation count of Journal of Wuhan University of Technology-Materials Science Edition is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)
ArticleCitations
Preparation and Swelling Kinetic Analysis of Poly (HPMC-co-AA-co-AM) Super Absorbent Resin20
Chemical and Thermal Characterization of Cement Mortar Containing Ground Palm Oil Fuel Ash as a Partial Cement Replacement15
Preparation and Performance of Organically Modified Montmorillonite Composite Separation Membrane12
Preparation of Silica Radiation Pore and Its Application as Antimicrobial Carrier12
The Curing for Modified Vinyl Ester Resin by Hexamethylene Diisocyanate and Its Influence on Performances11
Carbonation of Dicalcium Silicate Enhanced by Ammonia Bicarbonate and Its Mechanism11
Research on Freeze Drying and High-temperature Molding in Medium-temperature Fluorocarbon Board10
Microstructure, Texture Evolution, and Strain Hardening Behaviour of As-extruded Mg-Zn and Mg-Y Alloys under Compression10
Simulation of Dynamic Recrystallization in 7075 Aluminum Alloy Using Cellular Automaton10
Effect of Polyvinyl Alcohol in Inner Aqueous Phase on Stability of Millimeter-scale Capsules10
Molecular Simulation of Methane Adsorption in Different Micro Porous Activated Carbons at Different Temperatures10
Microstructure and Mechanical Properties of Al-11.3Zn-3.2Mg-1.3Cu-0.2Zr-0.1Sr-xTi Extruded Aluminum Alloy with Different Aging Process10
Fatigue Resistance of RCA Modified Asphalt Based on Dielectric Properties10
Fractal Geometry-based Porosity Analysis of Cementitious Composite Material Using Wollastonite Under Freeze-thaw Condition9
Enhanced Microwave Absorption for High Filler Content Composite Molded from Polymer Coated Flaky Carbonyl Irons Modified by Silane Coupling Agents9
Rare Earth Elements (La, Ce, Pr) Modified Co/NC Catalyst for Efficient and Stable Ammonia Decomposition to Hydrogen Production9
Dynamic Mechanical Behavior and Failure Characteristics of Sandstone Subjected to Freeze-thaw Treatment at Different Strain Rates9
Evaluation of Corrosion Degradation Law of Recycled Reinforced Concrete in Saline Soil Under Electrified Environment9
Preparation and Properties of Cu-Containing High-entropy Alloy Nitride Films by Magnetron Sputtering on Titanium Alloy9
Damage Characteristics Analysis and Fractal Study of Shale With Prefabricated Fractures under Thermal-mechanical Coupling9
Ammonium Persulfate Modified Activated Carbon for Adsorption of Acrylate VOCs9
Bacterial Cellulose/Zwitterionic Dual-network Porous Gel Polymer Electrolytes with High Ionic Conductivity9
The Electronic and Optical Properties of Vertically Stacked GaN-WS2 Heterostructure8
Structure Transition Mechanism in Undercooled CuNi Alloys8
Determination of Material Parameters of EVA Foam under Uniaxial Compressive Testing Using Hyperelastic Models8
Influence Mechanism of Curing Regimes on Interfacial Transition Zone of Lightweight Ultra-High Performance Concrete8
Influences of Ho Doping on Structure, Ferroelectric, Energy Storage and Optical Properties of KNN-SYbN Transparent Ceramics8
Abrasion Resistance of Cement Paste with Granulated Blast Furnace Slag and Its Relations to Microhardness and Microstructure8
The Solidification and Corrosion Behavior Determination of the Ti/B Added Zn-Al-Mg Alloys8
The Influence of Al on the Surface Properties of the Hot-dip Galvanized Melt8
Controllable Synthesis of Au NRs and Its Flexible SERS Optical Fiber Probe with High Sensitivity7
Reliability Analysis of Reinforcement Based on GM (1,1)-Markov Semi-immersion Test7
Catalytic Purification of NOx and PM by Fe-Doped CuCrO2 Catalyst Using Two Kinds of Carriers7
Microstructure Transformation of Undercooled Cu-Ni-Co Alloy and Refinement Mechanism under High Undercooling7
Pumpability of Manufactured Sand Self-compacting Concrete7
Bimetallic Pd-Cu/Al2O3 Catalyst for the Green Catalytic Synthesis of 2,2′-bipyridine from Pyridine7
Biomimetic “Nacre-like” Films Prepared via Layer-by-Layer Self-assembly of Mica, Polyvinyl Alcohol and Polymethyl Methacrylate7
Ultrathin GaN Film Derived from Amorphous Ga2O3 Film7
The Effect of Wet-grinding on the Properties of Glass Powder and Its Application in Cement Based Materials7
Nanoparticle/Microsphere TiO2/Bi2WO6Z-scheme Heterojunction with Excellent Visible-light Photocatalytic Performance7
Surface Metallization of Glass Fiber (GF) / Polyetheretherketone (PEEK) Composite with Cu Coatings Deposited by Magnetron Sputtering and Electroplating6
Distribution of Na+ and Mechanical Properties of Hardened Body of Alkali-activated Cementitious Materials6
Facet Regulation of Fe2O3 via Nanoarray Architecture to Enable High Faradic Efficiency for Electrocatalytic Nitrogen Fixation6
Porous Silica Nanospheres Grafted with L-Glutamic Acid for Enantioseparation6
Photocatalytic Degradation of Rhodamine B by Recyclable AgBr/Polypyrrole(PPy) Nano-Catalysts6
Synthesis and Characterization of Hollow Strontium Carbonate Pompons by Composite Soft Template Method6
Strength and Electrochemical Properties of Alkali-Excited Coal Gangue-Slag Co-Solidified Sludge6
Preparation and Performance of Chitosan/Citric Acid Modified Magnesium Oxychloride Cement6
Preparation of Silicon Fertilizer Using Lithium Pyroxene Acid-leaching Residues as Starting Materials6
Structural Evolution of Graphene Oxide and Its Thermal Stability During High Temperature Sintering6
Influence of Al2O3/SiO2 Ratio on the Structure and Properties of Na+ / K+ Ion Exchange Na2O-MgO-Al2O3-SiO2 Glasses6
Recent Advancements in the Development of Self Healing Concrete - A Systematic Review6
Effect of Hydrated Calcium Aluminate Cement on the Chloride Immobilization of Portland Cement Paste6
Analysis of Orientation Relationships, Carbon Partitioning and Strengthening Mechanism of a Novel Ultrahigh Strength Steel6
Effect of Solid Content, Dispersant and Binder Additions on the Drug Loading Properties of Attapulgite in Spray-Dried Microspheres6
Hydration, Microstructure, and Properties of Sulphoaluminate Cement in Pure Water and Simulated Seawater6
Research Progress of High Entropy Carbides6
Solidification Characteristics and Microstructure Evolution of Rapidly Solidified Cu Alloys6
Mixed Alkali-zinc Effects on Thermo-mechanical Properties in Borosilicate Glasses6
Regulating Effect of Substrate Temperature on Sputtering-grown Ge/Si QDs under Low Ge Deposition6
Investigation of Microstructure, Microhardness and Thermal Properties of Ag-In Intermetallic Alloys Prepared by Vacuum Arc Meltings6
Direct Decomposition of NO over Cobalt-based Perovskite Catalyst La1−xKxCoO3(x = 0.1–0.4) under Microwave Irradiation6
Quality Improvement of Recycled Concrete Aggregate by Accelerated Carbonation under Different Pressure6
Mechanical Properties of Nano-CaCO3 and Basalt Fiber Reinforced Concrete: Experiments and Numerical Simulations6
Carbon-coated ZnO Nanocomposite Microspheres as Anode Materials for Lithium-ion Batteries5
A Theory of Superconductivity based on Bose-Einstein Statistics and Its Application5
Effects of Co2O3 Addition on Microstructure and Properties of SiC Composite Ceramics for Solar Absorber and Storage5
Efficient Removal of Phosphate from Aqueous Solutions Using Corundum- hollow-spheres Supported Caclined Hydrotalcite Porous Thin Films5
Effect of Ti and Ce Microalloy on Microstructure and Properties of Al-Si-Cu-Zr-Sr Cast Aluminum Alloy5
Effect of Conventional and Pulsed TIG Welding on Microstructural and Mechanical Characteristics of AA 6082-T6 Repair Welds5
Effectiveness Evaluation Study of Self-made Zinc Alloy Sacrificial Anode under Chloride Salt Erosion Environment5
Experimental Study on Performances of Cement-Fly Ash Composite Expansive Stable Grout5
Synthesis of Nano-CuF2 with Superior Electrochemical Performances via a Mixed Solvent Coprecipitation Method5
Effect of Glutinous Rice Flour on Mechanical Properties and Microstructure of Cement-based Materials5
A Tremella-like Mesoporous Calcium Silicate Loaded by TiO2 with Robust Adsorption and Photocatalytic Degradation Capabilities5
Effect of Heat Treatment on Microstructure and Properties of Fe(Al,Ta)/Fe2Ta(Al) Eutectic Composite5
Nickel Sulfide Modified NiCu Nanoalloy with Excellent Oxygen Evolution Reaction Properties Prepared through Electrospinning and Heat Treatment5
Coarse to Fine: The Role of Severe Plastic Deformation in Advancing Titanium-Based Medical Implants - A Comprehensive Review5
Synthesis of Fluorene Derivatives Via TfOH-catalyzed Intramolecular Friedel-Crafts Alkylation Reactions5
The Effect of Nd3+ Concentration on Upconversion Luminescence in Yb3+/Tm3+/Nd3+ Tripledoped β-NaGdF4 Nanocrystals5
Variation in Polymerization Degree of C-A-S-H Gels and Its Role in Strength Development of Alkali-activated Slag Binders5
Effect of Multi-pass Compression on the Microstructure of 7 085 Aluminum Alloy5
Preparation and Reinforcement Adaptability of Jute Fiber Reinforced Magnesium Phosphate Cement Based Composite Materials5
Synergistic Effect of AuPd and NiOOH Cocatalysts Promoting Photoctalytic H2O2 Production of BiVO4 Photocatalyst5
Simulations of Tapered Channel in Multilayer Graphene as Reverse Osmosis Membrane for Desalination5
Preparation of TiO2 Supported Mxene Catalyst for High Efficiency Hydrogen Production5
Microstructure Transition and Grain Refinement Mechanism of Undercooled Alloys5
Upconversion and Near Infrared Emission of Rare Earth Ions in Chalcohalide Glass at the Early Stage of Crystallization4
Effect of Na2O Content on the Structure and Properties of LAS Glass-ceramics Prepared by Spodumene4
Synthesis and Characterization of Hydroxyl-terminated Block Fluorinated Copolyether(FPO-PTHF-FPO)4
Synthesis and Characterization of 9,9-diethyl-1-phenyl-1,9-dihydrofluoreno[2,3-d]imidazole-ended Fluorophores4
Comparative Study on Microstructure and Mechanical Properties of Coarse-grained WC-based Cemented Carbides Sintered with Ultrafine WC or (W+C) as Additives4
Carbon Fiber Breakage Mechanism in Aluminum (Al)/Carbon Fibers (CFs) Composite Sheet during Accumulative Roll Bonding (ARB) Process4
One-pot Synthesis of Hierarchical Flower-like WS2 Microspheres as Anode Materials for Lithium-ion Batteries4
Nitrogen-doped TiO2/Graphene Composites Synthesized via the Vapour-thermal Method4
Photocatalytic Degradation of Congo Red Using an S-scheme Heterojunction Photocatalyst Based on Bismuth Compounds4
Synthesis of 1,1,3,3,5,5-hexamethyl-1,5-bis[(3-ethyl-3-methoxyoxetane)propyl]trisiloxane and Research on Its UV-curing Performance4
An Experimental Study on Constant Current Load Test of Reinforced Concrete based on 3D Paraffin Isolation4
Effect of Asphalt and Cement Grout on Adhesive and Cohesive Failure Behavior of Semi-Flexible Pavement Materials4
Early Debonding Detection of Rebar-Concrete Interface due to External Loading Utilizing AC Impedance Spectroscopy4
Effect of Interdigitated Electrode Spacing on the Performance of Flexible InGaZnO Ultraviolet Photodetectors4
Study on Heating Uniformity of Pt-Rh Alloy Bushing for Producing Flexible Glass4
Mechanical Property and Microstructure of Cement Mortar with Carbonated Recycled Powder4
The Mechanical Characteristics and Damage Model of Helan Mountain Rock based on Acoustic Emission4
Preparation and Characterization of Alumina-coated Hollow Quartz Fiber Reinforced Al2O3-SiO2 Aerogel Composite4
Preparation and Microwave Absorbing Properties of Double-layer Fine Iron Tailings Cementitious Materials4
The Effects of WC on the Microstructures and Wear Resistance of FeCoCrNiB0.2 High Entropy Alloy4
Effect of Electrodeposition Methods of Cuprous Oxide on Antibacterial Properties of Concrete4
High Thermal Stability Gold Nanorods Included Alumina Film Prepared by a Dip-lifting Method4
Preparation of Gallic Acid-chitosan Copolymer and Its Antibacterial Activity against Staphylococcus Aureus and Escherichia Coli4
Microstructures and Properties of Honeycomb Sulfur/carbon Black/MoS2 Composites4
Enhanced Cathode/Electrolyte Interface in Solid-state Li-metal Battery based on Garnet-type Electrolyte4
Improvising the Self-Healing Capabilities of Concrete Using Different Pozzolanic Materials and Crystalline Admixtures4
Stabilising Effect of Steel Slag Modified Synergistically by Multivariate Microorganisms4
Highly Penetrable Silicone Emulsion for Water-Repellent Concrete with Reserved Surface Recoatability4
Preparation of Fluorine-free MXene Ti3C2Tx and Its Electrical Properties4
Microstructure, Properties, and Grain Growth Kinetics of Mo-5Ta Refractory Sputtering Targets Prepared by SPS4
Preparation and Properties of Light-colored Antistatic ATZO@TiO2/PAN Fiber4
Preparation of Nitrogen-doped Carbon Dots from Coke Powder as a Fluorescent Chemosensor for Selective and Sensitive Detection of Cr (VI)4
Preparation of Bi2O3/BiOI Step-scheme Heterojunction Photocatalysts and Their Degradation Mechanism of Methylene Blue4
Synthesis of Organic-Inorganic Hybrid Aluminum Hypophosphite Microspheres Flame Retardant and Its Flame Retardant Research on Thermoplastic Polyurethane4
Deformation Behavior and Microstructure Evolution during Equal Channel Angular Pressing of Pure Aluminum4
Microstructure and Properties of Fe-12Cr-2.5W-xSi-0.4Ti-0.3Y2O3 Alloys4
Interpretable Machine Learning Method for Compressive Strength Prediction and Analysis of Pure Fly Ash-based Geopolymer Concrete4
Effect of Cooling Rates on Solidification Microstructures and Tensile Property of a Novel Wrought Superalloy4
Microstructure and Mechanical Properties of AlSiTiCrNiCu Particles Reinforced Al6061 Composites by SPS and HPS Process3
Photocatalytic Activity Enhancement in Organic Dyes Degradation by Loading Ag Nanoparticles onto α-Fe2O3/ZnOs3
Research and Prediction on the Properties of Concrete at Cryogenic Temperature Based on Gray Theory3
Dimensional Effects in CO2 Uptake and Compressive Strength of Pervious Concrete Subjected to CO2 Curing3
Anti-breast Cancer Activity of pH-responsive Nanogel Loaded with Curcumin3
Effect of Plastic Deformation on Microstructure and Properties of Cu-(1 wt%–6 wt%) Ag Alloy3
Ni3Fe/Ni4S3/Ni/C Mixed Crystal Composite Nanofibers Prepared by Electrospinning and Heat Treatment Methods for Oxygen Evolution Reaction3
Effect of Bi/Si Ratio of BiBSi Glass on Its Structure, Properties and Laser Sealing Shear Strength for Vacuum Glazing3
Effect Evaluation and Mechanism Analysis of β-Hemihydrate Phosphogypsum on Performances of Red Mud Concretes3
Effect of Ti Additions on Mechanical and Thermodynamic Properties of W-Ti Alloys: A First-principles Study3
Effect of Heat Treatment on Microstructure and Mechanical Properties of Multiscale SiCp Hybrid Reinforced 6061 Aluminum Matrix Composites3
Self-reinforced Calcium Phosphate Cement Inspired by Sea Cucumber Dermis3
Enhanced Photocatalytic Activity of Z-scheme Meso-BiVO4-Au-CdS for Degradation of Rhodamine B3
Influences of Different Admixtures on the Drying Shrinkage Characteristics of Metakaolin-based Geopolymer Mortar3
Porous FeP/FeO Deposited on Carbon Cloth with Accelerated Kinetics for the Hydrogen Evolution Reaction3
Langmuir-Schaefer Film Investigation and Density Functional Theory Band Gap Calculations of Calix[n]arene-Para-Aminobenzoic Acid for Drug Nanosensor Application3
Highly Transparent PVA Hydrogel with Enhanced Mechanical Properties and Electrical Conductivity by Doping with Cyclohexane-1,2,3,4,5,6-Hexacarboxylic Acid3
Deformation Stability of GH4033 Superalloy in the Hot Continuous Rolling Process Based on Dynamic Material Model and Finite Element Model3
Enhanced Formaldehyde Gas Sensor based on Au-loaded ZnSnO3 Microspheres Nanocomposites3
Frost Resistance of Magnesium Oxychloride Cement Mortar Added with Highland Barley Straw Ash3
Rapid Detection of Cement Raw Meal Composition Based on Near Infrared Spectroscopy3
Effect of Al2O3/SiO2 Ratio on the Structure and Tensile Strength of Glass Fiber by Experiment and Molecular Dynamics Simulation3
Photocatalytic-adsorption Purification Performance of Pervious Concrete Containing TiO2/LDHs-loaded Recycled Aggregates for Gas Pollutants3
Silicone Modified Polyesters Vulcanizable at Room Temperature for Anti-corrosion Coatings on Tinplate3
Preparation of Spherical Tungsten Particles Assisted by Hydrothermal Method3
High Performance Gas-sensitive Ink for Non-contact Dispenser Printing MEMS Gas Sensor3
Effect of Modification Treatment on Chloride Ions Permeability and Microstructure of Recycled Brick-mixed Aggregate Concrete3
Numerical Simulation Investigation on Split Sleeve Cold Expansion of Ti-Al Stacked Structure3
Interlaminar Bonding Performance of UHPC/SMA Based on Diagonal Shear Test3
Solidification/Stabilization of Chromium in Red Mud-based Geopolymer3
Tribological Properties of Ti-DLC Coatings on Piston-pin Surfaces3
Cross-scale Correlation of Macro-micro Evaluation Indexes for Asphalt Binder3
Fracture Behaviours and Notch Effects of 2D Carbon/Carbon Composites Performing by Bending and Tensile Tests3
Structure and Optical Properties of ZnO Thin Films Prepared by the Czochralski Method3
Ultraviolet Photodetector based on Sr2Nb3O10 Perovskite Nanosheets3
Accelerated Deterioration Mechanism and Reliability Evaluation of Concrete in Saline Soil Area3
Carbonation Resistance of Hybrid NanoSiO2 Modified Cementitious Surface Protection Materials3
Synthesis and Characterization of Novel Hydrolytically Degradable Polyesters3
Sealing Effect of KAl(SO4)2 Solution on the Corrosion Resistance of Anodized Aluminum Alloy3
Microstructure and Wear Resistance of Fe4CoCrNiB0.2Mox (x=0, 0.5, 1) High Entropy Alloys3
Effect of a Carbon Fibre-steel Fibre-graphite Conductive Filler on the Electrothermal Properties of Cementitious Materials3
Factors Affecting Resin Mineral Composites’ Effective Elastic Modulus3
Effects of Sm Doping to Improve the Thermoelectric Properties of ZnO Ceramics3
Mechanism in Solidification of a Ternary Nickel Based Alloy3
Improvement of Mechanical Properties and Wall Thickness Uniformity of Hollow Ceramic Spheres by Biaxial Rotation Slurry Injection Technology3
Properties of Solid Waste-based Solidified Sludge Improved by Microbially Induced Calcium Carbonate Precipitation Technology3
Formation of Natural Melanin/TiO2 Nanostructure Hybrids with Enhanced Optical, Thermal and Magnetic Properties as a Soft Material3
Hollow Spherical Structure CoS2−xSex for Electrocatalytic Hydrogen Evolution Reaction3
Effect of Particle Size on Silicon Nitride Ceramic Slurry by Stereolithography3
Cadmium-containing Wastewater Induced by SRB: Effect of Multiple Ions and Mineralization Process3
Synthesis and Characterization of Poly(1,4-butylene 2,5-furandicarboxylate-co-isosorbide 2,5-furandicarboxylate)3
Facile Preparation of Robust Superhydrophobic Stainless Steel Mesh Coated with Urushiol-based Polybenzoxazine and SiO2 for Efficient Oil/water Separation3
Effect of Sodium Alginate on the Mechanical Properties and Microstructure of Metakaolin-Based Geopolymers3
Mechanical and Electrical Properties of Y-containing Al-Zr Heat-resistant Alloy Produced by Dynamic ECAE Process3
Simulation of Cement Hydration and Porous Structures by the Hydration-Pixel Probability Model3
Solution-combustion Synthesized Nano-pellet α-Al2O3 and Catalytic Oxidation of Cyclohexane by Its Supported Cobalt Acetate3
The Performance Evolution Characteristics of In-situ Concrete at the Permafrost Regions3
Fabrication of Porous SiC Coatings on Quartz Substrates by Laser Chemical Vapor Deposition3
Effects of MgO/SiO2 Ratio on Crystallization Properties of MgSiO3 and Mg2SiO4 Nanocrystals in Aluminosilicate Glasses3
The Electrocatalytic Performance of Rare Earth Ion Doped Co0.2Ni0.8-MOF-74 Catalyst for Nitrogen Reduction3
Internal Curing Mechanism of Sepiolite in Cement Paste3
Biomass Carbon Aerogel Modified by N235 and KH560 for Removal of Iodide from Oilfield Brine3
Effect of Accelerated Aging Temperature under Artificial Seawater on the Properties of Carbon Fiber/Epoxy Composites and the Erosion Mechanism2
Effect of Solutionizing and Aging on Microstructure and Mechanical Properties of Warm-rolled 7075 Alloy2
Biotin-modified Galactosylated Chitosan-gene Carrier in Hepatoma Cells Targeting Delivery2
Tailoring Carbon Distribution in α/γ Phase of Ductile Iron and Its Effects on Thermal Conductivity2
Study of Shifted UV Emission Peak of ZnO Nanowire Arrays2
A Review on Algal Corrosion of Marine Concrete2
Preparation, Characterization and Photothermal Study of PVA/Ti2O3 Composite Films2
Mechanical Property Evaluation of Glass-carbon-durian Skin Fiber Reinforced Polylactic Acid Composites2
Microstructure Regulation and Combustion Performance Optimization of PVDF/Al Composite Powder by Non-covalent Functionalized Graphenes2
Boosting Photocatalytic Performance of Cu-Mn Co-doped CeO2 Nanoparticles for Tetracycline Degradation2
A Fluorescent Probe based on a Carbazole Derivative for Detecting Brilliant Blue in Food2
Effect of Free-fall Nozzle Channel Dispersion Angle on TC4 Discontinuous Droplets Pre-breakup in EIGA2
Effects of Diamond on the Mechanical Properties and Thermal Conductivity of Si3N4 Composites Fabricated Using Spark Plasma Sintering2
Effect of Solution-ECAP-Aging Treatment on the Microstructure and Properties of TB8 Titanium Alloy2
Synthesis of a Novel Silicon-containing Epoxy Compound and Its Mechanical Properties for Amine Curing2
Recalescence Velocity and Microstructure Evolution of Deeplyundercooled Cu65Ni35 Alloy2
Pervaporation Recovery of n-butanol from Its Dilute Solution with Natural Rubber/Styrenebutadiene-styrene Blend Membrane2
Enhanced Anti-aging Performance of SBSMA Based on SBS Pre-swelling/Extraction Process and Blending with C92
Non-isothermal Kinetic Analysis on the Thermal Decomposition of the Phase 517 from Hydration Product of Magnesium Sulfide Cement2
Estimation of Chloride Diffusivity in Hydrated Tricalcium Silicate Using a Hydration-Diffusion Integrated Method2
Effect of Na2CO3 Roasting Activation on Acid Leaching Property of Fly Ash2
Bioprocess-inspired Actin Biomineralized Hematite Mesocrystals for Energy Storage2
Microstructure Characteristics and Possible Phase Evolution of the Coal Gangue-Steel Slag Ceramics Prepared by the Solid-State Reaction Methods2
Application and Properties of Organic Emulsion Coated Phosphogypsum in Aluminous Rock Based Mineral Polymer Composite2
Preparation of Fine-grained 3Y-TZP Ceramics with Enhanced Low-temperature Degradation Resistance2
Fe Nanoparticles Synthesized by Pomegranate Leaves for Treatment of Malachite Green2
Preparation and Performance of Ternary Early Strength Agent and Quercetin Composite Cement Sealing Material2
Usability of Waste Steel Grits in Concrete Pavement2
Exploring the Core-shell Structure of BaTiO3-based Dielectric Ceramics Using Machine Learning Models and Interpretability Analysis2
Thermal Stability and Electrochemical Properties of Separators for Lithium-ion Batteries2
Basic Physical Characteristics of the Water-permeable Brick with Composite Structure2
Compressive Strength of Basic Magnesium Sulfate Cement Coral Aggregate Concrete (MCAC) on Non-Destructive Testing2
Effects of BN on the Mechanical and Thermal Properties of PP/BN Composites2
Expansion Performance and Microstructure of High-performance Concrete using Differently Scaled MgO Agents and Mineral Powder2
Effect of Pre-strain on Microstructure and Stamping Performance of High-strength Low-alloy Steel2
Effects of Steam Curing on the Resistance of Cementitious Materials to Chloride Penetration2
Impact of Bubbles on Mechanical Performances in a Borosilicate Glass2
Corrosion Study of Two-step Deposition Coatings on Copper Foil2
Fracture Properties of Self-Compacting Concrete Incorporating Multiple Toughening Components2
Effect of Ultra-low Temperature on Carbonation Performance of SFRRC and Prediction Model2
Preparation of Novel Core-shell Non-sintered Lightweight Aggregate and Its Application in Wallboard for Better Properties2
Enhanced Thermal Resistance of Boron Phenolic Composites by Addition of TiSi2 Particles2
Generation of Quantum-dot Photon Emission in h-BN via Local Strain Engineering2
Distribution Properties of Internal Air Voids in Ultrathin Asphalt Friction Course2
Effects of Varying Copper Content on the Microstructure and Mechanical Properties of FeCoNiCux2
Performance and Characterization of Fluidized Solidified Soil Prepared by Synergistic Cement and Phosphogypsum with Slag Powder-Fly Ash2
Synthesis and Luminescence Properties of Green-emitting Phosphor CaSc2O4:Ce3+2
Effect of Na+ and Sr2+ Substitution on the Formation of the Oxygen Vacancies in Y3Al2Ga3O12:Ce3+ Phosphor2
Fabrication of YAG: Ce3+ and YAG: Ce3+, Sc3+ Phosphors by Spark Plasma Sintering Technique2
Effect of Epoxy Resin on the Properties of Recycled Asphalt2
The Mechanical and Electrical Properties of the Smart Aggregate Based on the Mixed Cementitious Materials2
Layer by Layer Self-assembly Fiber-based Flexible Electrochemical Transistor2
Protection Performance of Plasma Sprayed Al2O3-13 wt%TiO2 Coating Sealed with an Organic-inorganic Hybrid Agent2
Precipitates Generation Mechanism and Surface Quality Improvement for Aluminum Alloy 6061 in Diamond Cutting2
Micro-structure and Macro-performance: Surface Layer Evolution of Concrete under Long-term Exposure in Harsh Plateau Climate2
Dynamic Impact Compressive Behavior Investigation of Sisal Fiber-reinforced Coral Seawater Concrete2
Preparation of Modified Composite Nanofiltration Membrane Synergistically Using Carboxylic Multi-walled Carbon Nanotube and β-cyclodextrin2
Low-temperature Denitration Mechanism of NH3-SCR over Fe/AC Catalyst2
Prediction Model-based Multi-objective Optimization for Mix-ratio Design of Recycled Aggregate Concrete2
Self-healing Mechanism of Asphalt: Molecular Modeling and Shear-healing Test2
Synergistically Improved Mechanical Properties and Thermal Conductivity of Hypoeutectic AlSiNiFeMg Alloy Prepared by Ultrasonic-assisted Casting2
Calcium Carbonate and Ettringite Induced Efflorescence in CAC- Anhydrite Binary Systems2
Effect of High Content Limestone Powder on Microstructure and Mechanical Properties of Cement-based Materials2
0.85810995101929