Journal of Polymer Research

Article	Citations
Structural characterization of by-product lignins from organosolv rapeseed straw pulping and their application as biosorbents	105
In situ monitoring of photo-PISA via aggregation-induced emission (AIE) technology	104
Poly(N-acryloyl glycine) based temperature/pH-responsive hydrogels reinforced with montmorillonite for plugging of damaged oil pipeline	91
Study on the fatigue resistance of natural rubber with SiO2 microspheres	78
Smart electrospun mats of poly(vinylidene fluoride) with thermochromic pigment	78
Synthesis, characterization and hydrolytic degradation studies of aromatic polyphosphazenes derivatives	73
The use of mussel-inspired polydopamine interlayer for high-efficiency surface functionalization of PET fabrics	62
Review on applications of microencapsulated phase change material in buildings for thermal storage system	60
The investigation of TPU molecular structure regulation and supercritical fluid foaming behavior	58
Raman and tip-enhanced Raman spectroscopy studies of polymer blends: a review	54
Comb-shaped Poly(eicosyl methacrylate) Polymer via reverse ATRP using Fe(III) complex	52
Using olefin metathesis reaction to modify solution polymerized styrene-butadiene rubber (SSBR) by for a more stable “green tire”	50
Synthesis and characterization of (allylamine hydrochloride-vinyl sulfonic acid) copolymer and determination of monomer reactivity ratios	49
Quantitatively evaluation of the hydrogen bonding, wettability and sorption behaviors of poly(vinyl alcohol)/tea polyphenols composites	49
Salicylic acid-based deep eutectic mixture as catalytic curing agent for high-performance epoxy resins: cure characteristics and mechanical properties	47
Development of nanofibrous membranes incorporating WO3/TiO2/Ag3PO4 photocatalysts for the degradation of methylene blue	45
Preparation and characterization of high strength and high modulus PVA-La fiber with synthesized syndiotacticity-rich high polymerization degree PVA polymers as raw materials	44
Synthesis of esters derived from 2,5-furandicarboxylic acid and study of its plasticizing effects on poly(lactic acid)	43
Polyaniline derivatized anion exchange membrane for acid recovery	42
Recent advances in carboxylated butadiene rubber nanocomposites: effect of carbon nanotube and graphene oxide	42
Fabrication of porous and conductive polystyrene/polyaniline fibers via electrospinning method: Adsorption and selectivity of oil	41
Selective dispersion of SEBS copolymer in the compatibilization of PS/PP recycled copolymer blend: towards the circular economy	41
Dynamic mechanical properties and damping behavior of multilayer core–shell structures containing modified montmorillonite: a physical analysis of inter-molecular interactions	41
Enhanced thermal stability and mechanical performance of epoxy resin with amine-terminated aromatic amide oligomer: unveiling the ring-opening curing phenomenon	39
Effect of the composition ratio of repeating units on the properties of poly(4-vinylbenzocyclobutene-co-styrene): molecular dynamics simulation studies	39

Effects of PEG surface modification of magnetic nanoparticles on sonocatalysis and photocatalysis in PVDF composites	38
Modulating cross-linked network structure of epoxy resin blends towards concurrently high intrinsic thermal conductivity and dielectric properties	37
Analysis of formation mechanism of crystal form I in isotactic polybutene-1 based on a melting memory method	36
Influence of the addition of glycerol-derived polymers on the properties of post-consumer recycled PET	36
Synthesis, swelling and water-retention behaviors of phytic acid-modified corn stalk-composite superabsorbents	34
Synthesis and salt resistance of non-ionic polymer P (AM/ APEG400/NVP/SM)	34
Construction of 3D framework of BN and silica with advanced thermal conductivity of epoxy composites	33
The molecular design and characterization of a transparent and flexible TiO2/polymer nanocomposite with antibacterial and anti-UV light properties	32
Enhancement in forward osmosis performance of thin-film nanocomposite membrane using tannic acid-functionalized graphene oxide	31
Polypyrrole-functionalized g-C3N4 for rheological, combustion and self-healing properties of thermoplastic polyurethane	31
High energy density and thermal stability of polymer nanocomposites reinforced with assembled carbon and ceramic nanoparticles for energy-power application	31
Study the effects of functionality of carbon nanotubes upon acoustic wave absorption coefficient, microstructure, and viscoelastic behavior of polyurethane/CNT nanocomposite foam	31
Preparation of nanofibers with Cu/TiO2/rice husk ash photocatalyst and their degradation of methylene blue under visible light	31
Enhancing photostability of poly(vinyl chloride) through additives: diorganotin (iv)-tyrosine complexes design	31
Highly effective In2O3-rGO catalyst for the photocatalytic degradation of polyethylene under visible light	30
Mechanism of calcium stearate deteriorating the wear resistance of UHMWPE: structure–property relationship	30
A novel polyurethane microcapsule coated with polyacrylamide using D-sorbitol as chain extender for enhanced oil recovery	29
Films derived from thermoplastic starch/alginate/spent coffee grounds for food packaging applications	29
Improving ablation resistant properties of epoxy-silicone rubber composites via boron catalyzed graphitization and ceramization	29
The preparation of an ion-imprinted polymer based on hyperbranched polyamide-amines and epoxy resin and its efficient adsorption mechanism for Cr(VI) from aqueous solutions	28
Thermo-crosslinking assisted preparation of thiol-acrylate main-chain liquid-crystalline elastomers	28
Artificial intelligence-based optimization for ring-opening metathesis polymerization of proton exchange membrane	28
Synthesis & characterization of tri arm Indole based ATRP Polymer and antibacterial study with its silver nanocomposite	27
Effect of starch initial moisture on thermoplastic starch film properties and its performance as agricultural mulch film	27
Hydroxyethyl methacrylate modified polylactic acids and their micelle properties	27
Mechanical, viscoelastic and gas transport behaviour of rotationally molded polyethylene composites with hard- and soft-wood natural fibres	27
Efficient solution polymerization of vinyl monomers using iron nanoparticle grafted carbon nano-granules	27
Optimization of graphene oxide–nanosilica hybrid nanofillers for enhanced basalt fiber–reinforced polyester composites using machine learning	26
Surfactant-assisted interfacial polymerization for improving the performance of nanofiltration-like forward osmosis membranes	26
Combined influence of 3D printing parameters and thermal conditioning on the tensile strength of FGF-Printed PLA components	26
Effect of polycarbodiimide on the structure and mechanical properties of PLA/PBAT blends	26
Effect of UV-induced crosslink network structure on the properties of polylactic acid/polybutylene adipate terephthalate blend	26
Fabrication high toughness biodegradable poly(lactic acid)/poly(butylene adipate-co-terephthalate) composites via melt compounding with an epoxy chain extender and facile annealing process	26
Superior flame retardancy and mechanical property of HDPE/EVA composites enhanced by linear poly(bisphenoxyphosphazene) oligomer	26
Insulation-conduction synergistic aramid/carbon fiber/PPS sandwich composite paper: tailored electromagnetic shielding and multi-environmental adaptability	26
Synergistic enhancement of dynamic and thermo-mechanical properties of epoxy/glass fiber composites with GNP-MH fillers	25
Synthesis of fluorine-contained hyperbranched polysiloxane with blue photoluminescence and research on its fluorescence properties	24
Effect of complex of resorcinol and hexamethylenetetramine modified halloysite nanotubes (RH-HNTs) on the mechanical and swelling characteristics of NR/EPDM nanocomposites	24
A novel pH-and temperature sensitive polymer based on MoS2 modified poly (N-Isopropyl Acrylamide)/ allyl acetoacetate for doxorubicin delivery: synthesis, characterization, in-vitro release and cytoto	24
Graphene quantum dots coated cationic polymer for targeted drug delivery and imaging of breast cancer	24
Extremely adherent and protective polymeric coating based on polydiphenylamine electrodeposited on steel in an organic electrolytic medium	23
Effects of HDPE and LLDPE as masterbatch base on the properties of PE100	23
Catalytic effects of sodium salts with varied anionic pairs on the polymerization of liquid crystal polyesters	23
Optically transparent and stretchable pure bacterial nanocellulose	23
Influence of diamine moieties on the gas permeation performances of polyimide: perspectives from experiment and simulation	22
Graphene nanoplate incorporated Gelatin/poly(2-(Acryloyloxy)ethyl trimethylammonium chloride) composites hydrogel for highly effective removal of Alizarin Red S from aqueous solution	22
Optical development and density modification dependence in poly (methyl methacrylate) reinforced with borax microparticles	22
Preparation and characterization of poly(butylene succinate-co-adipate)/poly(lactic acid) blends with enhanced compatibility, mechanical properties, and heat resistance	22
Study on in-situ fiber forming properties of different LLDPE systems	22
Ti(OBu)4 in combination with B(OBu)3: Decoding the importance of chemo-selectivity of the catalyst towards high molecular weight poly(butylene succinate) synthesis	22

Effect of ultraviolet irradiation on strength and toughness of composites of poly(lactic acid) and poly(butylene adipate-co-terephthalate) with different mass ratio	22
The nucleation mechanism of 1-N',3-N'-dibenzoylbenzene-1,4-dicarbohydrazide as a nucleating agent for isotactic polypropylene	22
Construction of aligned carbon nanotube/benzoxazine composite films with high mechanical properties and heat resistance	22
Micromechanical and tribological properties of polymeric coating on metal surface	22
PVA/PAAm hydrogel-on-titanium alloy with high bonding strength and low friction as articular cartilage replacement	22
Multiple layered PVDF-CNTs foams with gradient structure and high electromagnetic shielding performance	21
Ansa-metallocene catalyst based on 3-phenyl and 4-methyl substituted: catalyst evaluation in conjugated and non-conjugated diene polymerization	21
Excellent mechanical and chemical resistance properties exhibited by bamboo fiber reinforced poly(lactic acid) - epoxy composites	21
Preparation of oxidized polyethylene wax from polyethylene wax by SCCO2-assisted foam method: structural characteristics, reaction mechanism and properties	21
Poly(ethyl methacrylate)-based diblock copolymer nano-objects prepared via RAFT-mediated polymerization induced self-assembly in n-heptane	21
β-cyclodextrin based electrospun nanofibers for arginase immobilization and its application in the production of L-ornithine	21
Donor – acceptor and donor – donor alternating conjugated polymers based on dithieno[3,2-b:2',3'-d]pyrrole: synthesis, optical properties and organic solar cells applications	21
The third compound promoted ethylene homopolymerization and copolymerization with 1-octene by using metallocene catalyst	20
3D printing thermo-responsive shape memory polymer composite based on PCL/TPU blends	20
Pistachio shell biochar as a reinforcing filler in short Turkish hemp fiber composites: a path toward sustainable materials	20
Progress of dispersion polymerization in recent 15 years	20
Thermal, mechanical, and self-healing properties of polymer networks produced by photo-polymerizing α-cyclodextrin-glycidyl methacrylate adduct and poly(ethylene glycol) methacrylate	20
P, N, Si synergistic flame-retarding water polyurethane coating with superior flame retardancy and hydrophobicity	20
A review of the curing rate and mechanical properties of epoxy resin on polymer matrix composites	20
Correction to: Synthesis and characterization of Aloe-vera-poly(acrylic acid) -Cu-Ni-bionanocomposite: its evaluation as removal of carcinogenic dye malachite green	20
Polymer chain conformations in hybrid composites of UHMWPE incorporated by GNP/MWCNT	20
A short review article on conjugated polymers	20
Multiscale characterisation of strains in semicrystalline polymers	19
Fabrication of lightweight, tough polypropylene composite foams: effects of nucleating agent structure on the foaming behavior and tensile property of polypropylene foams	19
Retraction Note: Sulfonated polysulfone containing phenyl side chain as proton exchange membrane	19
Preparation and properties of CO2-based cyclic carbonate reinforced epoxy resin composites	19
Production of PLA/NR blends compatibilized with EE-g-GMA and POE-g-GMA: an investigation of mechanical, thermal, thermomechanical properties and morphology	19
Biocompatible compositions based on chitosan and collagen with high strength characteristics	19
A phenomenological model for predicting local creep and thermal drift of polymers from micro-indentation test data	18
Photochromic functionalization of polyetheramine-cured epoxy resin based on spiropyran derivatives doping	18
Multicycle indentation based fatigue and creep study of polymers	18
Chitosan/poly(vinyl alcohol)/graphene oxide mixed matrix membrane for the pervaporation dehydration of ethylene glycol	18
Short‐term creep experiments and modeling on the effect of nano-sized calcium carbonate particles and applied stress on nonlinear viscoelastic behavior of high-density polyethylene	18
Preparation and properties of acrylic acid grafted onto chitosan derivative-based superabsorbent polymers	17
The shape memory performance of the dynamically vulcanized TPV nanocomposites of trans-isoprene/ low-density polyethylene and organoclay	17
Tensile properties of 3D printed structures of polylactide with thermoplastic polyurethane	17
Glassy structure affected cold-crystallization behavior and structure of poly(lactic acid)	17
Enhanced corrosion resistant, tribological properties and self-healing of epoxy-polyurethane coatings by dynamic Diels-Alder bond	17
Nanostructured porous carbon derived from polypyrrole nanoribbons for capacitive deionization and lithium–sulfur batteries	17
Preparation of ultrafine fibrous membrane with TiO2/Bi2SiO5 photocatalyst on eggshell and its degradation of organic dye under visible light	17
Determining the impact of accelerated hydrothermal aging on the mechanical properties of polyvinyl chloride and chlorinated polyvinyl chloride	17
Experimental insights into synergestic SiO2 nanoparticle/welan gum: the role of surface interaction in improving oil recovery	17
Design, and synthesis of a plasticizer- Schiff’s bases complexes as additive for polystyrene	17
Quantitative evaluation of the hydrogen bonding effects on the crystallization kinetics of poly(vinyl alcohol)/tea polyphenol composites	17
Comparative study on fire properties and HCL capture of PVC- melamine cyanurate composite through experiment and DFT calculation	17
Synthesis and physicochemical properties of UV-curable palm oil-based polyurethane reinforced with fluoroacrylate monomer	17
Methyl acrylate functionalized hyper-crosslinked polymers and their efficient adsorptive removal of aromatic small molecule compounds from water	17
Effect of Bi2O3 nanoparticle loading on the structural, thermal, and dielectric properties of epoxy nanocomposites	17
A review on the micro-encapsulation of phase change materials: classification, study of synthesis technique and their applications	17
Synthesis and characterization of an injectable, self-healing hydrogel based on succinyl chitosan, oxidized pectin, and cellulose nanofiber for biomedical applications	17
Component ratio effects of melamine cyanurate and aluminum diethylphosphinate in flame retardant TPU	17
PAN/PVA composite nanofibrous membranes for separating oil-in-water emulsion	17
New insight into structure-property correlation of polyacrylonitrile precursor fibers and resultant carbon fibers	17
Fabrication of weakly basic-functionalized poly(styrene-co-maleic anhydride) hyper-cross-linked resins for the efficient adsorption of organic acid	17
Preparation and performance study of modified cellulose-based polymer absorbents	16
Preparation and properties of lightweight UV-resistant polypropylene composites using TBT modified HGB in conjunction with TiO2	16
Synthesis of phosphorus containing magnolol epoxy monomer and its flame retardant modification on bisphenol A epoxy resin	16
Pentaerythritol derived bicyclic phosphates as halogen-free flame retardants for thermoplastic polyurethane	16
Synthesis of low thermally curable benzoxazine resins	16
Eugenol-derived bio-based benzoxazine-co-urethane resins: synthesis, characterization and robust thermal stability	16
Characterization of the interaction of nitric oxide/nitrogen dioxide with the polymer surfaces in ECMO devices	16
Investigation of the polymer material perforation time: comparison between two fiber laser wavelengths	16
Mechanical performances, in-vitro antibacterial study and bone stress prediction of ceramic particulates filled polyether ether ketone nanocomposites for medical applications	16
The effect of diethylene glycol distearate on the flowability of abs and its lubrication mechanism	16
A physicochemical study on dry-cast porous poly (styrene-co-acrylonitrile) film	16
Synthesis and evaluation of calcium and zinc humates for stabilization of poly(Vinyl Chloride) and study their self-synergistic effect	16
Plastic deformation analysis of polyacrylonitrile fibers subject to tension: visualization of fibrillation behavior	16
Mechanical and thermal properties of acrylonitrile–butadiene–styrene/wollastonite composites: the role of mixing strategy	16
Investigations on the deblocking reactions of blocked polyisocyanates synthesized from solid waste styrofoam by a non-isocyanate approach and its application in the fabrication of epoxy-polyurethane f	16
Evaluation of mechanical, morphological, and dynamic mechanical properties on basalt/E-glass fiber/epoxy modified with MWCNTs + SiO2 hybrid nanocomposites	16
Facile and scalable preparation of polyvinyl alcohol/hexagonal boron nitride composites via water-assisted mechanochemical and thermal processing	16
The effect of SiO2 calcination temperature and [Si]/[Mg] molar ratio on the performance of bi-supported Ziegler-Natta catalysts in ethylene polymerizations	16
Biocomoposites of polylactic acid/ poly(butylene adipate-co-terephthalate) blends loaded with quinoa husk agro-waste: thermal and mechanical properties	16
Influence of mechanical blending method and consolidation temperature on electrical properties of the prepared graphene nanoplatelet/UHMWPE composite	16
Facile synthesis of 2,6-di-tert-butylphenol modified polystyrene and its antioxidative properties as the heterogeneous antioxidant	16
Biodegradable poly(butylene adipate-co-terephthalate)/poly(vinyl acetate) blends with improved rheological and mechanical properties	16
Facile synthesis of aluminum oxyhydroxide-PVA films and its adsorptive evaluation for the removal of methylene blue dye from water: kinetics, optimization studies and mechanism	16
Effects of chemical and autoclave sterilization treatments on medical personal protective equipment made of nonwoven polypropylene fibers for recycling	16
Fatigue resistance and failure behavior of reaction compatibilized PC/ABS blends under tensile cyclic loading	15
Organosilicon-modified epoxy resin coatings for anti-smudge application	15

Development of polymer composites reinforced with sugarcane Bagasse fibers and their impact on mechanical properties	15
Study on the mechanical and thermal parameters of PBX during the vertical extrusion charging process	15
Fabrication of polybutadiene modified waterborne polyurethane coatings with excellent anti-smudge characteristics	15
Interconnected porous BT-VTS/PVDF-HFP nanocomposites with enhanced electroactive β-phase and crystallinity fabricated via thermally induced phase separation	15
Degradation of polylactic acid and polylactic acid/natural rubber blown films in aquatic environment	15
Development of a micro-patterned membrane consisting of a PCL/Keratin/PEGDE ternary blend using PSµM for potential biotechnological applications	15
Development and evaluation of a modified trifunctional epoxy matrix for enhanced corrosion resistance: combined experimental and theoretical studies	15
The relationship between exponent t in McLachlan equation and electronic percolation thresholds of solution cast films	15
The role of entropy in interfacial interactions between polymer-grafted reduced graphene oxide and acrylate copolymers	15
Controlled release characteristics of methylenebisacrylamide crosslinked superabsorbent polymer for water and fertilizer conservation in agriculture sector	15
Mechanical behavior and property evaluations of electromagnetic shielding/far infrared functional composite boards made of nano carbon-stainless steel knitted fabrics and far infrared polypropylene	15
Preparation and properties of hemoglobin (Hb)-imprinted poly (ionic liquid)s via seATRP in only 5 μL Volumes	15
Optimization of Drilling parameters for reduced Delamination Factor in non-functionalized and amine-functionalized Luffa/Epoxy Composites	15
Synthesis of polymer-grafted thermally reduced graphene oxide by RAFT polymerization and their effects on properties of cured unsaturated polyester resins. I. Synthesis of polymer-grafted thermally re	14
Enhancing heat-resistance of epoxy with conductive and crosslink networks by designing imide-based chain extender	14
Antioxidant activity of bottlebrush copolymers and its self-assembly in mixed monolayers with cholesterol in the presence of cerium nitrate	14
Novel sustainable and thermal-responsive composite hydrogel based on poly (vinyl alcohol)-glycerin-xanthan gum as a drug carrier for metronidazole	14
Preparation, characterization and biodegradability of acrylate graft rice husk/ lignin reinforced PBAT	14
A temperature, pH, and ion sensitive block copolymer with an unusual phase transition: Monomethoxy polyethylene glycol—block-polyethyleneimine	14
Effects of treatment methods on surface morphology and performance of modified natural fiber biopolymers and biocomposites - a comprehensive review	14
Synthesis of bovine serum albumin-gelatin composite adhesive hydrogels by physical crosslinking	14
Interfacial polymerization of poly (m-phenylene isophthalamide): synthesis, optimization, and performance evaluation for high-temperature insulation and flexible membranes	14
Mechanical, physical and thermal properties of waste polypropylene/polystyrene/natural rubber (wPP/PS/NR) blends	14
Synthesis and characterization of polylactic acid/polymethyl methacrylate/silica nanocomposites with enhanced biodegradation properties	14
Valorization of eggshell waste in designing flexible polyurethane-based piezoelectric composite materials for ultrasonic transducers	14
Degree of sulfonation (DS) - determination by different analytical techniques in ionomers derived from polystyrene	13
Bioinspired fabrication of insensitive 3,4-dinitrofurazanfuroxan@polydopamine@hydroxyl-terminated polybutadiene core–shell composites	13
Mechanical and morphological properties of PP/XNBR blends produced with rubber latex	13
Unveiling the microstructural evolution of carbon fibers derived from polyamide-6	13
Improving the performance of polyvinylidene fluoride (PVDF)-based proton exchange membranes with the addition of cellulose acetate for direct methanol fuel cells	13
Fabrication of highly selective SPVDF-co-HFP/APTES-SiO2/Nafion nanocomposite membranes for PEM fuel cells	13
Hyaluronic acid-based self-repairing hydrogel preparation and 3D cell culture	13
Fabrication of poly(lactic acid)-cellulose acetate core-shell electrospun fibers with improved tensile strength and biocompatibility for bone tissue engineering	13
Mechanically robust room-temperature self-healing waterborne polyurethane with antimicrobial properties constructed through multiple dynamic bonds	13
Morphological and acoustical characterization of UV-irradiated foam composites from cooking oil and wood flake	13
Extraction procedure and theoretical studies of chitin from black soldier fly	13
Effect of polyethylene glycol modified MWCNTs-OH on the crystallization of PLLA and its stereocomplex	13
Epoxy vitrimer based on borate ester bond for green degradation, closed-loop recycling, and ready reprocessing	13
Bamboo fiber-reinforced silicone rubber for soft actuators: Preparation and application	13
Hydrogel-based fire extinguishing technology for lithium-ion battery fires: mechanisms, applications, and future perspectives	13
Strategy to achieve low-dielectric-constant for benzoxazine-phthalonitriles: introduction of 2,2'-bis[4-(4-Maleimidephen-oxy)phenyl)]propane by in-situ polymerization	13
How do the core mechanical properties affect the toughening of polypropylene with core-shell particles?	13
Fabrication of polypropylene-g-poly(acrylic acid) based microfibers by combination of photo-induced metal-free ATRP and electrospinning process	13
Enhanced mechanical, thermal and dielectric properties of polyimide nanocomposites containing SiCp (SiCw) nanofillers for high energy-storage applications	13
Robust silicone rubber with high transparency by loading with porous hollow glass microsphere	13
Recent advances of chitosan-based polymers in biomedical applications and environmental protection	13
Natural multi-function additive for linear low-density polyethylene: Scutellarin baicalensis extractive	13
Corn silk fibre reinforced PLA biocomposites for automotive application	12
Synthesis and optimization of biodegradable porous superabsorbent hydrogels based on gelatin-methacrylic acid and its application for phenazopyridine removal from pharmaceutical waste	12
A sustainable production of Ixora coccinea Linn. derived cellulose phthalate for industrial dye removal from waste water	12
Preparation and property of high strength PVA-PEI- MWCNTs-COOH hydrogel using annealing treatment	12
Silicon-containing conductive polyurethane-imide elastomers: unique microstructure, heat resistance, mechanical property, and conductivity	12
Synthesis and characterization of a new acrylic emulsion with dual efficacy: UV-shielding and antibacterial function	12
Synthesis of a novel fluorinated polymer: poly(2-(tetrafluoro(trifluoromethyl)-λ6-sulfanyl)ethyl acrylate)	12
PVA-Incorporated chitosan-aminated starch films with shape memory effect for tissue engineering applications	12
The preparation of the polyamide 6/fluorescein composite by in situ polymerization method and its properties	12
Structural, thermal, and linear/nonlinear optical performance of PVA/CMC polymer blend doped with ZnS/V prepared at different temperatures	12
Effects of VCN coating of PEEK gears with the PVD method on wear performance	12
Development of graphene oxide-based styrene/acrylic elastomeric disks from sugarcane bagasse as adsorbents of Nickel (II) ions	12
Effect of the aramid pulp on the physicochemical, viscoelastic properties and rheokinetics of polyurethanes	12
Eco-friendly poly (ε-caprolactone) based Microfiltration polymeric membranes - influence of dope composition on morphology and performance concerning oil-water separation	12
Development of storage bin using lantana camara flour reinforced polypropylene composites: product performance study on the composite bin for pharmaceutical applications	12
Adhesive and mechanical characterization of urethane epoxy resins synthesized using glycidol and aliphatic diisocyanates	12
Conversion of polycarbonate from waste compact discs into antifouling ultrafiltration membrane via phase inversion	12
Presence of polar and non-polar conformations in P(VDF-TrFE) films for efficient piezoelectric nano-energy harvester	12
Synthesis and characterization of Aloe-vera-poly(acrylic acid)-Cu-Ni-bionanocomposite: its evaluation as removal of carcinogenic dye malachite green	12
The effects of ether, ester, carbonate polyol and hydrophilic group contents on the mechanical properties and abrasion resistance of solvent-free water-based polyurethane foam	12
Role of gamma irradiation on ion diffusion of PEO-NH4I based solid polymer electrolytes	12
Effect of different forms of SiO2 nanoparticles on the performance of 3D-printed Poly(lactic acid) composites	12
Incorporation of internal surface functionalized MCM-41 in thin film nanocomposite NF membrane for desalination applications	12
Kinetic analysis and dielectric properties of tyrosine-based tripeptide side groups carrying novel methacrylate polymers	12
Incorporation of biomass carbon to boost mechanical, thermal and tribological properties of polyoxymethylene composites	12
Influence of reaction conditions on kumada catalytic transfer polymerization for synthesis of poly(p-phenylene) for organic semiconductors	12
Thermal rounding for shape modification of high-performance polyetherketoneketone and reinforced polyetherketoneketone-carbon fiber composite particles	11
Forsythia suspensa extract obtained from traditional Chinese herbal medicine as an efficient natural antioxidant for polyethylene	11
Polymeric dispersant incorporated with fatty acid as TiO2 anchoring group for surface coating applications	11
Investigation of the characteristics and performance of compatibilized PLA/PCL blends and their nanocomposites with nanocalcium carbonate	11
Biobased hydrogel reinforced with wastepaper-derived modified cellulose nanofiber as an efficient dye remover from wastewater	11
Influence of natural weathering on aesthetics, structural, morphological, and mechanical properties of the palm petiole fibers/LLDPE composites	11
Visual observation and Numerical Studies of bubble formation of polypropylene chemical foaming system in the different injection foaming environment	11
Water Hyacinth: A sustainable cellulose source for cellulose nanofiber production and application as recycled paper reinforcement	11
Preparation of pH-responsive poly(methyl methacrylate) nanoparticles with CO2-triggered aggregation	11
Synthesis and properties of poly(acrylamide-co-N-vinylpyrrolidone-co-sodium p-styrene sulfonate) as an anionic fluid loss additive	11
EDTA incorporated Fe-Zn double metal cyanide catalyst for the controlled synthesis of polyoxypropylene glycol	11
Effect of the composition and electrospinning time of gelatin solutions in acetic acid on their rheological properties and nanofiber morphology	11
Influence of microwave power and HDPE blend ratio on thermal and mechanical properties of kenaf reinforced PLLA/HDPE blended composites	11
Fenugreek-enriched electrospun PLA scaffold: revolutionizing tissue engineering solutions	11
Size-dependent and spatial variations in the structural properties of spin-coated poly(Vinylidene Fluoride) films	11
Enhanced ionic conductivity in sodium-ion polymer electrolytes: The role of ethylene carbonate in optimizing NaPF6 based PEO:PVDF-HFP polymer electrolytes	11
Application of a novel sodium alginate-graft-poly(methacrylic acid-co-acrylamide)/montmorillonite nanocomposite hydrogel for removal of malachite green from wastewater	11
Effect of acidic environment on absorptive, morphological, mechanical, structural, and thermal properties of glass-carbon/epoxy-based hybrid composites	11
Study on properties of fish scale biomimetic fluororubber prepared by template method	11
Quantitatively elucidate the reinforcement mechanism of bonding agents in azide propellant system via molecular dynamics simulation	11
Facile preparation of in situ special-shaped microfibrillar polyolefin elastomer /poly(lactic acid) /polyamide 6 composites	11
The synthesis of 4,4'-methylenebis(cyclohexylamine)-based porous organic polymers via nucleophilic substitution reactions for uptaking iodine and fluorescence sensing to dinitrophenol	11