Journal of Polymer Research

Article	Citations
A review on synthesis and biomedical applications of polyglycolic acid	97
Functional nanocomposites and their potential applications: A review	80
Development history and synthesis of super-absorbent polymers: a review	76
Research on synthesis and self-healing properties of interpenetrating network hydrogels based on reversible covalent and reversible non-covalent bonds	63
Influence of chemical structure of hard segments on physical properties of polyurethane elastomers: a review	57
Novel synthesis, DFT and investigation of the optical and electrical properties of carboxymethyl cellulose/thiobarbituric acid/copper oxide [CMC + TBA/CuO]C nanocomposite film	55
Design and in vivo evaluation of alginate-based pH-sensing electrospun wound dressing containing anthocyanins	49
Advanced biopolymers for automobile and aviation engineering applications	48
Glycolysis: an efficient route for recycling of end of life polyurethane foams	47
Synthesis and characterization of pH responsive alginate based-hydrogels as oral drug delivery carrier	46
Enhancement of physico-chemical, optical, dielectric and antimicrobial properties of polyvinyl alcohol/carboxymethyl cellulose blend films by addition of silver doped hydroxyapatite nanoparticles	44
Influence of pineapple leaf particulate on mechanical, thermal and biodegradation characteristics of pineapple leaf fiber reinforced polymer composite	44
Magnetic biohybrid chitosan-ethylene glycol diglycidyl ether/magnesium oxide/Fe3O4 nanocomposite for textile dye removal: Box–Behnken design optimization and mechanism study	44
Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives	42
Recent advances of chitosan-based polymers in biomedical applications and environmental protection	41
Metal-polymer composites for radiation protection: a review	39
Enhanced piezoelectricity properties of reduced graphene oxide (RGO) loaded polyvinylidene fluoride (PVDF) nanocomposite films for nanogenerator application	38
Dielectric and optical properties of alumina and silica nanoparticles dispersed poly(methyl methacrylate) matrix-based nanocomposites for advanced polymer technologies	38
Minimizing the negative charge of Alginate facilitates the delivery of negatively charged molecules inside cells	37
Preparation of melamine–formaldehyde resin-microencapsulated ammonium polyphosphate and its application in flame retardant rigid polyurethane foam composites	37
Enhanced CO2 capture in nitrogen-enriched microporous carbons derived from Polybenzoxazines containing azobenzene and carboxylic acid units	36
α-MoO3 nanobelts/CMC-PVA nanocomposites: hybrid materials for optoelectronic and dielectric applications	36
Evaluating distillers grains as bio-fillers for high-density polyethylene	35
CoFe2O4@methylcellulose synthesized as a new magnetic nanocomposite to tetracycline adsorption: modeling, analysis, and optimization by response surface methodology	35
Development of dopamine biosensor based on polyaniline/carbon quantum dots composite	35

Ion conduction in chitosan-starch blend based polymer electrolyte with ammonium thiocyanate as charge provider	35
Eco-friendly flame retardant poly(lactic acid) composites based on banana peel powders and phytic acid: flame retardancy and thermal property	35
A polymer blend from Gum Arabic and Sodium Alginate - preparation and characterization	34
Thermo-oxidative ageing of a SBR rubber: effects on mechanical and chemical properties	34
Study on electrochemical properties of CMC-PVA doped NH4Br based solid polymer electrolytes system as application for EDLC	34
Investigation of the mechanical and electrical properties of SnS filled PVP/PVA polymeric composite blends	33
Enhancing proton conductivity of sodium alginate doped with glycolic acid in bio-based polymer electrolytes system	32
Exploring the structural and optical properties of FeS filled graphene/PVA blend for environmental-friendly applications	32
The main blow spun polymer systems: processing conditions and applications	32
High-performance solid state supercapacitors based on intrinsically conducting polyaniline/MWCNTs composite electrodes	30
Enhanced structural, optical, electrical properties and antibacterial activity of PEO/CMC doped ZnO nanorods for energy storage and food packaging applications	30
Electron beam irradiation treatment of textiles materials: a review	30
Chemical modification of natural rubber in latex stage for improved thermal, oil, ozone and mechanical properties	30
Recent developments in stimuli-responsive poly(ionic liquid)s	29
Synthesis of gum acacia-silver nanoparticles based hydrogel composites and their comparative anti-bacterial activity	29
Improvement efficiency of the of poly (ether-block-amide) -Cellulose acetate (Pebax-CA) blend by the addition of nanoparticles (MIL-53 and NH2-MIL-53): A molecular dynamics study	29
Hydrogen bonding interactions in polymer/polyhedral oligomeric silsesquioxane nanomaterials	29
Synergetic enhancement of thermal conductivity by constructing BN and AlN hybrid network in epoxy matrix	27
3D-printing on textiles – an investigation on adhesion properties of the produced composite materials	27
Development of biocomposites based on bacterial cellulose reinforced delignified rice husk-PVA plasticized with glycerol	27
Dual drug delivery of curcumin and niclosamide using PLGA nanoparticles for improved therapeutic effect on breast cancer cells	27
Biodegradation efficacy of soil inherent novel sp. Bacillus tropicus (MK318648) onto low density polyethylene matrix	27
Lipophilic effect of various pluronic-grafted gelatin copolymers on the quercetin delivery efficiency in these self-assembly nanogels	26
Polycarbazole and its derivatives: progress, synthesis, and applications	26
Recent advancements in manufacturing technologies of microcellular polymers: a review	26
Preparation and properties of glutaraldehyde crosslinked poly(vinyl alcohol) membrane with gradient structure	25
Electrospun drug blended poly(lactic acid) (PLA) nanofibers and their antimicrobial activities	25
Production of castor oil-based polyurethane resin composites reinforced with coconut husk fibres	25
RETRACTED ARTICLE: Recent advances and future perspectives of lignin biopolymers	25
Potential of polylactide based nanocomposites-nanopolysaccharide filler for reinforcement purpose: a comprehensive review	25
A study on the anticorrosion performance of epoxy nanocomposite coatings containing epoxy-silane treated nanoclay on mild steel in chloride environment	25
A critical review of molecularly imprinted solid phase extraction technology	25
Synthesis and characterization of polythiophene/zinc oxide nanocomposites for chemiresistor organic vapor-sensing application	24
Novel insulation panels development from multilayered coir short and long fiber reinforced phenol formaldehyde polymeric biocomposites	24
Silica-graphene oxide nanohybrids as reinforcing filler for natural rubber	24
Study of structural, optical and dielectric properties of ZnO/PVDF-based flexible sheets	24
Morphological and performance evaluation of highly sulfonated polyethersulfone/polyethersulfone membrane for oil/water separation	24
3D printing thermo-responsive shape memory polymer composite based on PCL/TPU blends	24
Study of thermal, morphological, barrier and viscoelastic properties of PP grafted with maleic anhydride (PP-g-MAH) and PET blends	23
Covalently modified graphene quantum dot using a thiourea based imprinted polymer for the selective electrochemical sensing of Hg(II) ions	23
Enhancing the RO performance of cellulose acetate membrane using chitosan nanoparticles	23
Synthesis of magnetic nanoparticles-decorated halloysite nanotubes/poly([2-(acryloyloxy)ethyl]trimethylammonium chloride) hybrid nanoparticles for removal of Sunset Yellow from water	23
Schiff Base polymers: synthesis and characterization	23
Modified magnesium hydroxide encapsulated by melamine cyanurate in flame-retardant polyamide-6	23
Corrosion properties of organic polymer coating reinforced two-dimensional nitride nanostructures: a comprehensive review	22
3D printed bio polymeric materials as a new perspective for wound dressing and skin tissue engineering applications: a review	22
Utilization of oleic acid in synthesis of epoxidized soybean oil based green polyurethane coating and its comparative study with petrochemical based polyurethane	22
Synthesis of a poly(p-aminophenol)/starch/graphene oxide ternary nanocomposite for removal of methylene blue dye from aqueous solution	22
Crystallization of polylactide-based green composites filled with oil-rich waste fillers	22
Porous organic/inorganic polymers based on double-decker silsesquioxane for high-performance energy storage	22

Functionalized carbon dot nanoparticles reinforced soy protein isolate biopolymeric film	22
Designed azo-linked conjugated microporous polymers for CO2 uptake and removal applications	22
Structural, electrical and electrochemical studies of ionic liquid-based polymer gel electrolyte using magnesium salt for supercapacitor application	22
Progress in MgCl2 supported Ziegler-Natta catalyzed polyolefin products and applications	21
Effect of thermal annealing on crystal structure and properties of PLLA/PCL blend	21
Improvement in antibacterial activity of Poly Vinyl Pyrrolidone/Chitosan incorporated by graphene oxide NPs via laser ablation	21
Development, thermal and dielectric investigations of PVDF-Y2O3 polymer nanocomposite films	20
P(VDF-TrFE)/ZnO nanofiber composite based piezoelectric nanogenerator as self-powered sensor: fabrication and characterization	20
PLA composites reinforced with rice residues or glass fiber—a review of mechanical properties, thermal properties, and biodegradation properties	20
Immobilization of gelatin on the oxygen plasma-modified surface of polycaprolactone scaffolds with tunable pore structure for skin tissue engineering	20
Covalent triazine based polymer with high nitrogen levels for removal of copper‎‎ (II) ions ‎from aqueous solutions	20
Tribological properties of hierarchical structure artificial joints with poly acrylic acid (AA) - poly acrylamide (AAm) hydrogel and Ti6Al4V substrate	20
Investigation of long-term ageing effect on the thermal properties of chicken feather fibre/poly(lactic acid) biocomposites	20
Developing montmorillonite/PVDF/PEO microporous membranes for removal of malachite green: adsorption, isotherms, and kinetics	20
Polycarboxylate-based water reducing admixture – clay compatibility; literature review	20
Potential application of PLGA microsphere for tissue engineering	20
Dual purpose, bio-based polylactic acid (PLA)-polycaprolactone (PCL) blends for coated abrasive and packaging industrial coating applications	20
Designs of zwitterionic polymers	19
Exploring cocatalyst type effect on the Ziegler–Natta catalyzed ethylene polymerizations: experimental and DFT studies	19
A review on grafted, crosslinked and composites of biopolymer Xanthan gum for phasing out synthetic dyes and toxic metal ions from aqueous solutions	19
Surface immobilization of PCL electrospun nanofibers with pexiganan for wound dressing	19
Fire behavior of flame-retardant polyurethane semi-rigid foam in presence of nickel (II) oxide and graphene nanoplatelets additives	19
Adsorbents for removal of cationic dye: nanocellulose reinforced biopolymer composites	19
Tensile and fracture properties of epoxy alumina composite: role of particle size and morphology	19
Synthesis and characterization of polybenzoxazine/clay hybrid nanocomposites for UV light shielding and anti-corrosion coatings on mild steel	18
Thermal properties and hydrophilicity of antibacterial poly(phenylene sulfide) nanocomposites reinforced with zinc oxide-doped multiwall carbon nanotubes	18
Synthesis of polystyrene/starch/CNT composite and study on its biodegradability	18
Tailoring the structural, electrical and thermal properties of zinc oxide reinforced chlorinated natural rubber/poly (indole) blend nanocomposites for flexible electrochemical devices	18
Nontoxic double-network polymeric hybrid aerogel functionalized with reduced graphene oxide: Preparation, characterization, and evaluation as drug delivery agent	18
Mechanical, electrical and thermal properties of graphene oxide-carbon nanotube/ ABS hybrid polymer nanocomposites	17
Conductivity, structural and thermal properties of corn starch-lithium iodide nanocomposite polymer electrolyte incorporated with Al2O3	17
Hybrid antibacterial hydrogels based on PVP and keratin incorporated with lavender extract	17
Melting temperature versus crystallinity: new way for identification and analysis of multiple endotherms of poly(ethylene terephthalate)	17
Synthesis and property study of ter-copolymer P(MA-AMPS-HPA) scale inhibitor	17
Vitrimers of polyolefin elastomer with physically cross-linked network	17
Heavy metal adsorptive application of hydrolyzed corn starch	17
Effects of the composition ratio on the properties of PCL/PLA blends: a kind of thermo-sensitive shape memory polymer composites	17
Robust magneto-rheological elastomers performance for composites based on iron oxide and carbon black in silicone rubber	16
Novel poly(3-hydroxy butyrate) macro RAFT agent. Synthesis and characterization of thermoresponsive block copolymers	16
Fabrication of antiseptic, conductive and robust polyvinyl alcohol/chitosan composite hydrogels	16
Development novel eco-friendly proton exchange membranes doped with nano sulfated zirconia for direct methanol fuel cells	16
Electrospun egg white/polyvinyl alcohol fiber dressing to accelerate wound healing	16
A review on the micro-encapsulation of phase change materials: classification, study of synthesis technique and their applications	16
Sonochemical synthesis and swelling behavior of Fe3O4 nanocomposite based on poly(acrylamide-co-acrylic acid) hydrogel for drug delivery application	16
Influence of halloysite nanotubes on mechanical and swelling properties of silicone rubber compound	16
Effect of different carboxylic acid group contents on microstructure and properties of waterborne polyurethane dispersions	16
Enhanced thermal and mechanical properties of hydrophobic graphite-embedded polydimethylsiloxane composite	16
PVC-SiO2-Ag composite as a powerful biocide and anti-SARS-CoV-2 material	16
Role of rGO on mechanical, thermal, and piezoelectric behaviour of PVDF-BTO nanocomposites for energy harvesting applications	15
Thermo-oxidative degradation of vulcanized SBR: A comparison between ultraviolet (UV) and microwave as recovery techniques	15
Selective removal of tetracycline residue in milk samples using a molecularly imprinted polymer	15
A polyethylene glycol (PEG) – polyethersulfone (PES)/multi-walled carbon nanotubes (MWCNTs) polymer blend mixed matrix membrane for CO2/N2 separation	15
Preparation and characterization of hydrogels obtained from chitosan and carboxymethyl chitosan	15
Effective removal of dyes from aqueous solutions using a novel antibacterial polymeric adsorbent	15
Improving the adsorption of poly(o-phenylenediamine) to heavy metal ions in aqueous solution through its composite with carbon dots	15
Recent developments of biomaterial scaffolds and regenerative approaches for craniomaxillofacial bone tissue engineering	15
Production and characterization of rigid polyurethane foam by oxypropylation of organosolv lignin extracted from exhausted olive pomace	15
Mechanical properties of all-cellulose composites from end-of-life textiles	15
Influence of succinonitrile plasticizer on ionic conductivity, structural and dielectric properties of potassium-based PEO/PVdF blend polymer electrolyte	15
Flexible piezoelectric PVDF/NDs nanocomposite films: improved electroactive properties at low concentration of nanofiller and numerical simulation using finite element method	15
An investigation into polymer blending, plasticization and cross-linking effect on the performance of chitosan-based composite proton exchange membranes for microbial fuel cell applications	15
Effect of crosslinking rate on the glass transition temperature of polyimide cross-linked silica aerogels	15
Preparation and characterization of bio-based green renewable composites from poly(lactic acid) reinforced with corn stover	15
Thermal-responsive magnetic hydrogels based on Tragacanth gum for delivery of anticancer drugs	15
Synthesis and characterization of pyromellitic dianhydride based sulfonated polyimide: Survey of structure properties with DFT and QTAIM	14
Reversible thermo-electric energy harvesting with phase change material (PCM) composites	14
Gamma irradiation synthesis of pectin- based biohydrogels for removal of lead cations from simulated solutions	14
Micromorphology and microtexture evaluation of poly(o-ethoxyaniline) films using atomic force microscopy and fractal analysis	14
Effect of carbon nanotube on space charge suppression in PP/EPDM/CNT nanocomposites	14
Effects of incorporation of silanized titanium nitride on the electrochemical and mechanical properties of polyurethane in aircraft coating	14
Effect of nickel phyllosilicate on the morphological structure, thermal properties and wear resistance of epoxy nanocomposites	14
Synthesis and characterization of poly(α-methyl β-alanine)-poly(ε-caprolactone) tri arm star polymer by hydrogen transfer polymerization, ring-opening polymerization and "click" chemistry	14
A novel stimuli-responsive magnetic hydrogel based on nature-inspired tragacanth gum for chemo/hyperthermia treatment of cancerous cells	14
Synthesis of bio-based semi aromatic high temperature polyamide PA5T/56 and effect of benzene ring on non-isothermal crystallization kinetics	14
Assessment of adsorption performance of chitosan/ZrO2 biosorbent composite towards Cs (I) and Co (II) metal ions from aqueous solution	14
A low cost and eco-friendly membrane from polyvinyl alcohol, chitosan and honey: synthesis, characterization and antibacterial property	14
A novel highly efficient intumescent flame-retardant polypropylene: Thermal degradation, flame retardance and mechanism	14
Biocompatible PLA/PCL blends nanocomposites doped with nanographite: Physico-chemical, and thermal behaviour	14
The reinforcement effect of cellulose nanofiber on Young’s modulus of polyvinyl alcohol gel produced through the freeze/thaw method	14
The prospect of synthesis of PES/PEG blend membranes using blend NMP/DMF for CO2/N2 separation	14

Preparation and property evaluations of PCL/PLA composite films	14
Polymer functional group impact on the thermo-mechanical properties of polyacrylic acid, polyacrylic amide- poly (vinyl alcohol) nanocomposites reinforced by graphene oxide nanosheets	14
Advances towards development of industrially relevant short natural fiber reinforced and hybridized polypropylene composites for various industrial applications: a review	13
Sulfamethoxazole as a ligand to synthesize di- and tri-alkyltin(IV) complexes and using as excellent photo-stabilizers for PVC	13
Synthesis, characterization, properties, and use of new fusidate organotin complexes as additives to inhibit poly(vinyl chloride) photodegradation	13
Synthesis of zinc oxide nanostructures using orange peel oil for fabricating chitosan-zinc oxide composite films and their antibacterial activity	13
Production and investigation of mechanical properties of graphene/polystyrene nano composites	13
Preparation and performances of form-stable polyethylene glycol/methylcellulose composite phase change materials	13
Dependence of β-crystal formation of isotactic polypropylene on crystallization conditions	13
Production of the ZnO-folic acid nanoparticles and poly(vinyl alcohol) nanocomposites: investigation of morphology, wettability, thermal, and antibacterial properties	13
Applications of polymers in lithium-ion batteries with enhanced safety and cycle life	13
Large-scale preparation of polylactic acid/polyethylene glycol micro/nanofiber fabrics with aligned fibers via a post-drafting melt blown process	13
Enhancement in forward osmosis performance of thin-film nanocomposite membrane using tannic acid-functionalized graphene oxide	13
Competing hydrogen bonding produces mesoporous/macroporous carbons templated by a high-molecular-weight poly(caprolactone–b–ethylene oxide–b–caprolactone) triblock copolymer	13
Smart advanced responsive materials, synthesis methods and classifications: from Lab to applications	13
An overview of Zn/ZnO modified cellulosic nanocomposites and their potential applications	13
Enhanced mechanical properties of functionalized BN nanosheets-polymer composites	13
Electrospun membranes of cellulose acetate/polyvinylidene difluoride containing Au/Se nanoparticles via laser ablation technique for methylene blue degradation	13
Preparation and study on properties of dual responsive block copolymer-grafted polypyrrole smart Janus nanoparticles	13
Development of graphene oxide-based styrene/acrylic elastomeric disks from sugarcane bagasse as adsorbents of Nickel (II) ions	13
Influence of poly(butylene succinate) and calcium carbonate nanoparticles on the biodegradability of high density-polyethylene nanocomposites	13
Wound dressings based on chitosan and gelatin containing starch, sesame oil and banana peel powder for the treatment of skin burn wounds	13
Highly efficient phosphorous-containing flame retardant for transparent epoxy resin with good mechanical properties	13
Degradation of polylactic acid and polylactic acid/natural rubber blown films in aquatic environment	13
In situ hydrolysis of epoxidized oleic acid by catalytic epoxidation-peracids mechanism	13
Excellent memory performance of poly (1,6-hexanediol adipate) based shape memory polyurethane filament over a range of thermo-mechanical parameters	13
Segmental evolution of ultraviolet weathered polyurea	13
Impact of ZnCdS/M (M = Co, Fe, Mn, V) doping on the structure and optical properties of PVA/PVP polymer	13
Design and development of bio-carbon reinforced hetero structured biophenolics polybenzoxazine-epoxy hybrid composites for high performance applications	13
On the mechanical behaviour of industrial PVC pipes under pressure loading: experimental and numerical studies	13
Alginate-chitosan/MWCNTs nanocomposite: a novel approach for sustained release of Ibuprofen	12
One-step synthesis and characteristics of LiOH-castor oil based stable polyurethane foam	12
Magnetic nanoparticle bonding to PVC with the help of click reaction: characterization, thermal and electrical investigation	12
Aminated magnetic polymeric resin for removal of anthraquinone and azo dyes from aqueous solutions	12
Treatment of hemp fibres for use in rotational moulding	12
The effects of proteins and phospholipids on the network structure of natural rubber: a rheological study in bulk and in solution	12
CeO2 modified graphene nanoplatelets composite powders enhanced the cathodic protection of waterborne zinc-rich epoxy coatings	12
Reinforcement of hydroxyethyl cellulose / poly (vinyl alcohol) with cellulose nanocrystal as a bone tissue engineering scaffold	12
The antibacterial activity and mechanism of polyurethane coating with quaternary ammonium salt	12
Highly stretchable gamma-irradiated poly (vinyl alcohol)/Tannic acid composite hydrogels with superior transparency and antibacterial activity	12
Enhanced crystallization rate of bio-based poly(butylene succinate-co-propylene succinate) copolymers motivated by glycerol	12
Engineering of core@double-shell Mo@MoO3@PS particles in PVDF composites towards improved dielectric performances	12
Preparation castor oil-modified high bio-based waterborne polyurethane and its application	12
Silicone rubber composite reinforced by bismuth tungsten oxide as an effective gamma ray protective materials	12
Preparation of a ferroelectric composite film metal–organic framework/PVDF	12
Nanofiller reinforced biodegradable PHA/PLA composites: physico-chemical, thermal and dielectric properties	12
Adsorption of methyl violet dye from wastewater using poly(methacrylic acid-co-acrylamide)/bentonite nanocomposite hydrogels	12
Effect of polycarbodiimide on the structure and mechanical properties of PLA/PBAT blends	12
Production, thermal and dielectrical properties of Ag-doped nano-strontium apatite and nano h-BN filled poly(4-(3-(2,3,4-trimethoxyphenyl) acryloyl) phenyl acrylate) composites	12
Biomodulation of poly (vinyl alcohol)/starch polymers into composite-based hybridised films: physico-chemical, structural and biocompatibility characterization	12
Epoxy resin reinforced with graphene derivatives: physical and dielectric properties	12
Study on synthesis and adsorption properties of ReO4− ion imprinted polymer	12
Influence of modified attapulgite on silicone pressure-sensitive adhesives properties	12
Biocompatible interpenetrating polymeric networks in hydrogel state comprised from jellyfish collagen and polyurethane	12
Recent trends of silicon elastomer-based nanocomposites and their sensing applications	12
Preparing and characterization of Poly(glycerol-sebacic acid-urethane) (PGSU) nanocomposites: clearing role of unmodified and modified clay nanoparticles	12
Synthesis and properties of CO2 copolymer-based waterborne polyurethane with high solid content	12
Thermo-expandable microcapsules with polyurethane as the shell	12
Natural rubber biocomposites based on nanocrystalline and modified nanocrystalline cellulose: curing, mechanical, thermal and electrical properties	12
Kinetic and thermal study of ethylene-propylene copolymerization catalyzed by ansa-zirconocene activated with Alkylaluminium/borate: Effects of linear and branched alkylaluminium compounds as cocataly	11
Ultrahigh sensitivity and wide strain range of porous pressure sensor based on binary conductive fillers by in-situ polymerization	11
Synthesis and characterization of natural rubber/graphene quantum dot nanocomposites	11
A review on valorization of chitinous waste	11
Optimization of zero-shear viscosity for HPAM-Polystyrene microspheres formulations through experimental design approach	11
Crosslinked electrospinning membranes with contamination resistant properties for highly efficient oil–water separation	11
PVDF reinforced with core–shell structured Mo@MoO3 fillers: effects of semi-conductor MoO3 interlayer on dielectric properties of composites	11
Pectin-based self-healing hydrogel with NaHCO3 degradability for drug loading and release	11
Preparation and characterization of PSF-TiO2 hybrid hollow fiber UF membrane by sol–gel method	11
Synthesis of novel Ziegler Natta catalyst in the presence of internal promoter and electron donors for ethylene and ethylene/ 1-hexene polymerization	11
Blends of synthetic plastic-derived polypeptide with Hydroxypropylmethylcellulose and polyvinyl alcohol: unraveling the specific interaction parameters, morphology and thermal stability of the polymer	11
Thermal degradation and flame retardant mechanism of sulfonated polyoxadiazole fibers modified by metal ions	11
Structural, thermal, and linear/nonlinear optical performance of PVA/CMC polymer blend doped with ZnS/V prepared at different temperatures	11
Effect of Fe3O4 nanoparticles on magneto-responsive shape memory behavior of polyurethane-carbon nanotube nanocomposites	11
A novel kind of room temperature self-healing poly(urethane-urea) with robust mechanical strength based on aromatic disulfide	11
Photocurable elastomers with tunable mechanical properties for 3D digital light processing printing	11
Effect of complex of resorcinol and hexamethylenetetramine modified halloysite nanotubes (RH-HNTs) on the mechanical and swelling characteristics of NR/EPDM nanocomposites	11
Crystalline phases thermal behaviour and radio frequencies dielectric properties of PVDF/PEO/metal oxides hybrid polymer nanocomposite films	11
Preparation and characterization of boron nitride nanosheet ferric oxide composite (BNNS@Fe3O4) through the double stabilization of PVP and its adsorption to congo red	11
Development of bacterial cellulose/chitosan films: structural, physicochemical and antimicrobial properties	11
Electrospinning of antibacterial cellulose acetate/polyethylene glycol fiber with in situ reduced silver particles	11
Electrical properties of two-armed poly(Ɛ-CL-co-BMA) composites filled with bentonite	11
Improvement in physico-mechanical and structural properties of rigid polyurethane foam composites by the addition of sugar beet pulp as a reactive filler	11
Dendrimer-like AB2-type star polymers as nanocarriers for doxorubicin delivery to breast cancer cells: synthesis, characterization, in-vitro release and cytotoxicity studies	11
Effects of star-shaped PCL having different numbers of arms on the mechanical, morphological, and thermal properties of PLA/PCL blends	11
Design and manufacturing a tubular structures based on poly(ɛ-caprolactone) / poly(glycerol-sebacic acid) biodegradable nanocomposite blends: suggested for applications in the nervous, vascular and re	11
Impact of Lithium halides on rheological properties of aqueous solution of poly(vinyl alcohol)	11
Effect of aging on the microstructure and physical properties of Poly(vinyl alcohol) hydrogel	11
Electrospun pH responsive poly (acrylic acid-co- acrylamide) hydrogel nanofibrous mats for drug delivery	11
Fabrication of SiO2-reinforced polybenzoxazine composites and their thermal and dielectric properties	11
Magnesium (II) bis(trifluoromethanesulfonimide) doped PVdC-co-AN gel polymer electrolytes for rechargeable batteries	11
Structural analysis of sol-gel derived TiO2 nanoparticles: a critical impact of TiO2 nanoparticles on thermo-mechanical mechanism of glass fiber polymer composites	11
Investigation of hygrothermal aging on the polyurethane-based (PUB) adhesive: substantiating competition scenario between sub-aging thermo-oxidation and hydrolytic phenomena	10
Latex reinforced waste buffing dust-jeans cotton composites and its characterization	10
Polyacrylonitrile/clay nanofibrous nanocomposites for efficient adsorption of Cr (VI) ions	10
Comparative study of some epoxy polymers based on bisphenolic and aromatic diamines: synthesis, viscosity, thermal properties computational and statistical approaches	10