Tribology Letters

Article	Citations
Dead Weight Microtribometer Calibration for Improved Tolerance to Transducer Crosstalk and Cantilever Torsion	46
Multiple Scratching: An Atomistic Study	46
Composite Lubricating Films with Silane Coupling Agent-Modified Carbon Nanotubes on a Silicon Substrate with Enhanced Wear-Resistant Properties	38
Expanding Fluidized Zones: A Model of Speed-Invariant Lubricity in Biology	31
Effect of Temperature on Rheological Behaviors and Tribological Properties of Nano-silica Greases Prepared from Base Oils with Different Viscosities	30
A Computational Study of Cluster Dynamics in Structural Lubricity: Role of Cluster Rotation	30
Mechanism of Influence of Graphene on Rheological and Tribological Properties of Polyurea Greases Considering Temperature and Load Effects	29
Tribological Behavior of Novel Core–Shell Fe3O4@PEG Nano-Additives	27
An Incremental Contact Model for Hyperelastic Solids with Rough Surfaces	27
Enhanced Lubricating Performance and Conductive Ability of Polyurea Grease by Metal Oxide Modified Tungsten Disulfide Composites	26
Thickener Behaviour in Rolling Elastohydrodynamic Lubrication Contacts	26
Effects of a Cylinder Liner Microstructure on Lubrication Condition of a Twin-Land Oil Control Ring and a Piston Skirt of an Internal Combustion Engine	25
The Effect of Friction Radius Variation on the Friction-Induced Vibration and Noise	25
Is Elastohydrodynamic Minimum Film Thickness Truly Governed by Inlet Rheology?	25
Performance of Carboxyl Groups in Chemical Mechanical Polishing of GCr15 Bearing Steel: Effects of Carbon Chain Length and pH	24
Tribological Behavior of 1,8-Diazabicyclo[5.4.0]Undecane-7-Ene–Organophosphoric Acid-Based Protic Ionic Liquids as Lubricant Additives	23
Correction to: Voltage-Assisted Tribofilm Formation of Sulfur- and Phosphorus-Free Organic Molybdenum Additive on Bearing Steel Surfaces in Industrial Base Oils	22
Wear Mechanism and Wear Debris Characterization of ULWPE in Multidirectional Motion	21
The Effect of Lubricity of Calcium Sulfonate on ZnDTP and MoDTC	21
Experimental and Finite Element Analysis of Plastic Domain Evolution of Wavy Surfaces During Contact	20
Synthesis of Oil Miscible Novel Silane Functionalised Imidazoline-Based ILs as Lubricant Additives: Characterization and Tribological Evaluations	20
Impact of Multi-walled Carbon Nanotubes as an Additive in Lithium Grease to Enhance the Tribological and Dynamic Performance of Roller Bearing	20
Bio-bearings: Numerical Model of the Solid Lubricant in the Leg Joints of Insects	19
The Tribocorrosion Behaviour of Ti-6Al-4 V Alloy: The Role of Both Normal Force and Electrochemical Potential	19
Effect of Counterface Material on Dry Sliding Wear of PEEK–PTFE Composites	19

Friction Properties and Mechanism of Aluminum Sheets Under an Eco-Friendly CMCS Lubrication Condition	19
Research on the Effect of Nano/Micron SiO2 Particles on Actual Wear of the Main Gear Box of Large-Scale Mechanical Equipment	18
On the Stability of Spinning Asteroids	18
Friction in Rolling a Cylinder on or Under a Viscoelastic Substrate with Adhesion	18
Preparation of Graphene and Its Tribological Properties Based on Deep Eutectic Solvent Stripping Method	18
Increased Sliding Friction of a Lubricated Soft Solid Using an Embedded Structure	18
Waviness Affects Friction and Abrasive Wear	18
Effect of Nanoparticles and Microparticles of Hexagonal Boron Nitride on Structure, Thermal and Mechanical Stability of Lithium and Calcium Greases	17
Influence of Defects in Graphene-Like Network of Diamond-Like Carbon on Silica Scale Adhesion	17
Mechanism of Non-Amontons Boundary Friction of Fullerene Ball Nano-Additives	17
A Boundary Lubrication Model and Experimental Study Considering ZDDP Tribofilms on Reciprocating Friction Pairs	17
Effect of Ti3SiC2 Amount on Microstructures and Properties of TiAl Matrix Composites	16
A Mortar Finite Element Formulation for Large Deformation Lubricated Contact Problems with Smooth Transition Between Mixed, Elasto-Hydrodynamic and Full Hydrodynamic Lubrication	16
Achieving Superlubricity of Ricinoleic Acid in the Steel/Si3N4 Contact Under Boundary Lubrication	16
Normal Contact Analysis Between Two Self-affine Fractal Surfaces at the Nanoscale by Molecular Dynamics Simulations	16
The Effect of Hardness and Surface Roughness of Elastomer on Friction Between Shoe Soles and Particle-Contaminated Floors	15
Linking Friction Scales from Nano to Macro via Avalanches	15
Tribological and Wear Properties of Cu-Based Composite Reinforced by Core–Shell Structure in Multi-disk Clutch	15
Surface Roughness-Induced Stress Concentration	15
Wear Evaluation of Poly(vinyl alcohol) Hydrogel by UV Spectrometry and Total Organic Carbon Measurement of Lubricant	15
Friction Coefficient Evolution of Drying Lubricant in the Joints of Beetles by Friction Force Microscopy	15
Wheel Tread Wear Prediction of High-Speed Railway Train	15
Towards a Universal Scaling for the Elastic Contact Between Anisotropic and Non-gaussian Surfaces	15
Leakage Threshold of a Saddle Point	15
Velocity-Dependent Dynamics of Friction and Wear	15
Comparing the Tribological Performance of Water-Based and Oil-Based Drilling Fluids in Diamond–Rock Contacts	14
Methyl Oleate-Alkylated Tetralin with Dual-Functional Groups as Base Oil with PAO to Improve the Performance of Lithium-Based Grease	14
Study on the Effect of Normal Loads on the Fretting Wear Performance of Zr-4 Alloy Tubes Under Three Fretting Modes	14
Resonance Enhancement of Atomic-Scale Friction: Nontrivial Role of Damping	14
Tribological Performance of Silver- and Oxygen-Doped Diamond-Like Carbon Coatings Under Nitrogen-Based Copolymer Additives	14
Effect of Different Kinds of Fillers on the Terrace-Like Structure of the Transfer Film and the Wear Behavior of the PTFE-Based Composites	13
Core–Shell Structured Silica Nanoparticles as Abrasive for Tungsten Chemical Mechanical Planarization	13
On the Adhesive Interaction Between Metals in Atomistic Simulations of Friction and Wear	13
Pro-Inflammatory Response to Macrotextured Silicone Implant Wear Debris	13
Tactile Perception of Vellum Quantified by Friction and Surface Roughness	13
Correction to: Activation Volume in Shear-Driven Chemical Reactions	13
Fretting Wear Behavior of PVA-Based Hydrogels Under Dry Friction	13
On the Friction and Lubrication of 3D Printed Ti6Al4V Hip Joint Replacement	13
Transient Evolution of Rheological Properties of Dense Granular Inertial Flow Under Plane Shear	13
Friction-Induced Stick–Slip Vibration Control via Composite Design of Surface Macro-Grooves and Micro-textures	13
Novel Environmentally Superior Tribomaterial with Superlow Friction: 100% Cellulose Nanofiber Molding	12
Impact of Graphene/Substrate-Interaction on Lubrication within Moiré Heterostructures	12
Friction Reduction Behavior of Polyacrylic Acid Solutions Driven by Molecular Structure and Adsorption Stability	12
Impact of the Amount of the Gold Layer on the Tribological Performance of the Ceramic Conversion Treated CP-Titanium	12
In situ Observation of the Formation of MoDTC-Derived Tribofilm on a Bearing Steel with Different Surface Roughness by Using a Reflectance Spectroscopy and Its Effects on Friction	12
A Multi-Scale Contact Model for Rough Surfaces Under Loading and Unloading Conditions	12
Sliding on Slide-Ring Gels	12
Nano Bi Chemical Modification and Tribological Properties of Bi/SiO2 Composite as Lubricating Oil Additives	12
Friction and Wear Life of Doped and Undoped MoS2 Dry Film Lubricants	12
Selective Laser Processing of B2O3 Coatings: Phase Evolution and Tribological Performance	12

On the Use of Alternative Measurement Methods in the Estimation of Wear Rates in Rotary-Pin-on-Disk Tribometry	12
Tribological Behaviour of Ti6Al4V Alloy: An Application in Small Joint Implants	12
Effect of the GLC Coating Thickness on the Mechanical and Tribological Properties of the CrN/GLC Coatings	12
Enhancing the Tribological Performance of MoS$$_2$$ Coatings in Humid Environments with the Addition of Bi$$_2$$S$$_3$$	11
Tribofilm Formation by Fe3O4 Nanoparticles as Lubricant Additives: Microscopic Insights into Growth Conditions and Mechanisms	11
The Influence of Lubricant Formulation on Surface Damage Under Electrified Rolling-Sliding Contact with Relevance to Electric Vehicle Drivetrain Applications	11
Counterion-Driven Mechanochemical Reactions at TC4 Alloy/SiO2 Interfaces: Electrical Double Layer and Dynamic Ionic Radius	11
A Comprehensive Study on the Tribological Behavior of Extruded and 3D-Printed PEEK for Low-Cost Dental Implant Solutions Under Simulated Oral Conditions	11
Mechanochemical Ionization: Differentiating Pressure-, Shear-, and Temperature-Induced Reactions in a Model Phosphate	11
Machine-Learning-Assisted Identification and Formulation of High-Pressure Lubricant-Piezoviscous-Response Parameters for Minimum Film Thickness Determination in Elastohydrodynamic Circular Contacts	11
ZDDP Tribofilm Formation and Removal	11
Linear Reciprocating Tribometer for In Situ Neutron Reflectometry of Soft Matter	11
Clarification of the Effect of Surface Energy on Tribological Behavior of Two-Phase Lubricant Using Reflectance Spectroscopy and Hydrodynamic Analysis	11
On the Nature of Contact Friction and Stress Distribution in Cutting: In situ Photoelastic Study	11
Unexpected Nonmonotonic Dependence of Phononic Friction on Biaxial Strain Between MoS2 Layers	11
Wear Behavior Dominated by Strain Partitioning Between Retained Austenite and α-Fe in Bainitic Steel	11
Substantiating the Process Parameters of Frictional Treatment with a Sliding Indenter for an Austenitic Chromium-Nickel Steel	10
A Molecular Dynamics Study on the Adhesive Contact with Effect of Tangential Forces	10
Superlubricity of Sputtered MoS2 Film in Dry Air Enabled by Proton Irradiation	10
In situ Growth and Characterization of Lubricious Carbon-Based Films Using Colloidal Probe Microscopy	10
A General Load–Displacement Relationship Between Random Rough Surfaces in Elastic, Non-adhesive Contact, with Application in Metal Additive Manufacturing	10
Quantitative Relationship Between Sliding-Generated Acoustic Emission and Friction Conditions at Bolted Joint Interfaces	10
Tribocorrosion Behavior of 2205 Duplex Stainless Steel in Sodium Chloride and Sodium Sulfate Environments	10
Lubrication Performance Under Electrical Regulation: Investigating the Mechanism of Graphene/Ionic Liquid Composite Materials	10
Control of Nanoscale Ripple Formation on Ionic Crystals by Atomic Force Microscopy	10
Refined Hydrodynamic Lubrication Model with a High-Accuracy Numerical Algorithm for Starved Lubrication with Free Surfaces	10
Layered Rare Earth Sulfates as Solid Lubricants for Enhancing Grease’s High Extreme-Pressure Performance	10
Toward Superlubricity of Amorphous Carbons: Friction of Thermally-Produced Carbon and Diamond-Like Carbon	10
Tribological Behavior of a Shot-Peened Nickel-Based Single Crystal Superalloy at High Temperature	10
Proof of Concept: In-Situ Wear Differentiation of Simultaneously Wearing Counterparts	10
Analyzing Ball Bearing Capacitance Using Single Steel Ball Bearings	10
Resistance to Oxidation and Tribological Behavior of MoS2 Nanoparticles in Severe Environmental Conditions	10
Influence of the Nature and Orientation of the Terminal Group on the Tribochemical Reaction Rates of Carboxylic Acid Monolayers on Copper	9
Correction: Rubber Wear: History, Mechanisms, and Perspectives	9
Novel In-Situ Observation of the Grease Constituents in Elastohydrodynamic Contacts by Fluorescence Microscopy	9
Mitigation of False Brinelling in a Roller Bearing: A Case Study of Four Types of Greases	9
Influence of Lubricated Rolling/Sliding Tribotesting on Hydrogen Trapping in 100Cr6 Bearing Steel	9
Tribological Characteristics of Laser Multi-scale Composite Textures for YT-15 Cemented Carbide Surface	9
Adhesion and Damage Behaviour of Wheel–Rail Rolling–Sliding Contact Suffering Intermittent Airflow with Different Humidities and Ambient Temperatures	9
DLC-Coated Thermoplastics: Tribological Analyses Under Dry and Lubricated Sliding Conditions	9
Evaluation of Wear Measurement with Radioactive Isotopes for DLC Coatings Affected by Abrasive Particles	9
Temperature‑Dependent Friction, Wear, and Life of MoS₂ Dry Film Lubricants for Space Mechanisms: A Comprehensive Review	9
Comparative Study on Surface Contact Fatigue of Machine Tool Bearing Raceways with Different Rolling Elements: Two Failure Bearings Case Studies	9
The Effects of Friction Block Shape on Friction-Induced Wear, Vibration, and Noise of Train Brake Interface at Low Temperature	9
In Situ and Ex Situ Analysis of the Reciprocating Sliding Wear Behavior of Cold Sprayed CrMnCoFeNi Cantor HEA Coatings in Dry Air and Ambient Air Conditions	9
Bidirectional Object Transport on Biomimetic Setal Array with Friction Anisotropy	9
Finite Element Simulation Method for Fretting Wear Considering Double-Side Wear Behavior	9
In Situ Friction Coefficient Measurement of Complex Contact Configuration from Dialog Between Digital Image Correlation and Numerical Modeling	9
Proof of Friction Law: Static Friction is Higher than Dynamic Friction	9
Interfacial Friction Evolution in an Oil-Based Drilling Fluid Environment: An Atomic Understanding from ReaxFF Simulations	9
Insights into the Tribological Properties and Electrical Conductivity of Cu–C Coating Under Grease Lubrication	9
Effect of Metal Composition on Mechanical Properties of Tribofilms	9
High Temperature Induced Brittle-Ductile Transition of Monocrystalline Silicon via In Situ Indentation	9
Numerical Simulation of Solid Particle Erosion of Alumina by Overlapping Irregular-Shaped Particle Impacts	9
Novel Eco-friendly Slurries for Chemical Mechanical Polishing of GCr15 Bearing Steel	8
Macroscopic Oil-Based Superlubricity Achieved on Steel Surfaces with the Roughness of Engineering Level	8
On the Structure–Activity Relationship of Glyceryl oleate Friction Modifiers and Its Synergistic Mechanism on Phosphate ester Antiwear Additives	8
Smooth Particle Hydrodynamics Analysis of Hydrodynamic Lubrication with Free Surface Flow	8
Modeling of Rigidly Mounted PTFE Face Seals Subject to Small Strain Harmonic Vibrations	8
Tribological Performance of Shaft and Surface Pairs with PPS and its Composites in Seawater under Cyclic Loading	8
Ionic Liquid-Nanoparticle-Based Hybrid-Nanolubricant Additives for Potential Enhancement of Tribological Properties of Lubricants and Their Comparative Study with ZDDP	8
Influence of the Gas Atmosphere on the In-Situ Formation of Low-Friction Molybdenum and Tungsten Diselenides	8
Influence of Different Neutral Gas Irradiation in Low Earth Orbit on the Structure and Tribological Performance of WS2 Films	8
Engine Oils in the Field: A Comprehensive Tribological Assessment of Engine Oil Degradation in a Passenger Car	8
Evaluating the Repeatability of Friction Coefficient Measurements and Tactile Perceptions in Skin–Textile Interactions Across Body Regions	8
Effects of Phosphonate Additives with Hydroxy Groups on the Tribological Properties of ta-C Coatings Under Boundary Lubrication	8
Anisotropic Friction Derived from the Layered Arrangement of the Oriented Graphite Flakes in the Copper–Iron Matrix Composite	8
A JKR/Griffith Model for the Inception of Slip in the Contact Between Nominally Flat Rough Surfaces	8
Improving Archard’s Wear Model: An Energy-Based Approach	8
Mechanical Durability Testing and Self-Recovery of Topographically Modified Superhydrophobic Surfaces	8
Yarn/Yarn Friction Analysis Considering the Weaving Process of Textile Fabrics: Analytical Model and Experimental Validation	8
Non-monotonic Evolution of Contact Area in Soft Contacts During Incipient Torsional Loading	8
Effect of Strain on Atomic-Scale Friction in Two-Dimensional Graphene/ZrS2 van der Waals Heterostructure	8
Insights on Silver Migration Mechanisms and their Influence on the Wear Behavior of Thermally Sprayed Self-lubricating Coatings Up to 350 °C	8
Friction and Lubrication of Eye/Lens/Lid Interface: The Effect of Lubricant and Contact Lens Material	8
On the Use of Surface Roughness Parameters	8
Study on the Fretting Wear Evolution Model of Wires with Curvature Inside Metal Rubber	8
Microstructure and Wear Resistance of Gray Cast Iron Synergistically Manipulated by Nano-sized TiC–TiB2 Ceramic Particles	8
Friction and Wear of PMMA Microspheres Rubbed Against Mo-Doped DLC Surfaces	8
Features of Tire Wear Particles Emitted from Retreaded Tires and Evaluation on Environmental Risk: Compared with New Tires in Tribological View	8

Study on the Friction Behavior and Abnormal Conditions of Non-contact Mechanical Seal Based on Acoustic Emission	8
Resistance Model for Capsule Endoscope Traveling in the Curved Intestine	8
Strongly Different Adhesion Reduction for 1D or 2D Random Fractal Roughness, and an Extension of the BAM Model to Anisotropic Surfaces	7
Friction Enhancement and Autoparametric Resonance	7
Why Curling Stones Curl: Modelling and Numerical Experiments	7
Study of Friction and Wear Characteristics of PEEK by Reciprocating Sliding Experiment and Temperature Dependences Simulation	7
Cobalt- and Chromium-Oxide-Based Coatings: Thermally Spraying a Glaze Layer	7
A First-Principles Model of Curling Stone Dynamics	7
A New Model for Sphere Asperity Contact Analysis Considering Strain Hardening of Materials	7
Methods to Observe Tribological Failures in Self-Mated Steel Contacts	7
pH-Dependent Friction of Polyacrylamide Hydrogels	7
Inhibition of Micro-pitting by Tribofilm-Forming ZrO2 Nanocrystal Lubricant Additives: A Micro-pitting Rig and Transmission Electron Microscope Study	7
Wear Regimes of Fe–Cr–C Hardfacing Alloys in Microscale Abrasion Tests	7
Influence of a Succinimide Dispersant on the Tribological Performance of MoS2 Nanoparticles	7
On the Tribological Properties of RGO–MoS2 Composites Surface Modified by Oleic Acid	7
Fluid Leakage in Static Rubber Seals	7
Additives Depletion by Water Contamination and Its Influences on Engine Oil Performance	7
Correction to: Roughness Evolution Induced by Third-Body Wear	7
Addition of Solid Oxide Particles for Friction Reduction	7
A Novel Free-Gliding Ski Tribometer for Quantification of Ski–Snow Friction with High Precision	7
Laser-Induced Fluorescence (LIF) Method-Based Research on the Influence of Textured Water-Lubricated UHMWPE Bearing Tribological Performance	7
High-Pressure Lubrication of Polyethylethylene by Molecular Dynamics Approach	7
Modeling Contact of Rough Surfaces with Bearing Ratio Curves	7
Sliding Viscoelastic Contacts: Reciprocating Adhesive Contact Mechanics and Hysteretic Loss	7
Experiments and Prediction of Hold Time-Dependent Static Friction of a Wet Granular Layer	7
Preparation and Tribological Behavior of N-doped Graphene Oxide Quantum Dots with MoS2 and Al2O3 Nanocomposites as Lubricant Additive in Aqueous Glycerol	6
The Flow of Lubricant as a Mist in the Piston Assembly and Crankcase of a Fired Gasoline Engine: The Effect of Viscosity Modifier and the Link to Lubricant Degradation	6
The Effects of Humidity on the Velocity-Dependence and Frictional Ageing of Nanoscale Silica Contacts	6
Prandtl–Tomlinson-Type Models for Coupled Molecular Sliding Friction: Chain-Length Dependence of Friction of Self-assembled Monolayers	6
Local Directional Fractal Signature Method for Surface Texture Analysis	6
Piston Ring Mixed Lubrication Model Including Real Geometry Using Analytical Correction Coefficients: Theory and Experimental Validation	6
Derjaguin and the DMT Theory: A Farewell to DMT?	6
On the Use of Foam Rubber for Sealing Applications	6
Modelling Friction Reduction Based on Molybdenum Disulphide Tribofilm Formation and Removal in Boundary Lubrication	6
Scratch Behavior of Micro-Patterned Polymeric Surfaces	6
Concentrated Polymer Brush in Reciprocating Seal Improves Sealing Performance with Low Friction Even for Rough Surfaces and Immiscible Fluids	6
Novel Phosphate Organic Guanidine Salt Water-Based Additive with Integrated Anti-Friction, Anti-Wear and Anti-Corrosion Properties	6
The ta-C Hardness Effect on Wear Properties Under MoDTC Contained Boundary Lubrication	6
First-Principles Study of Superlubricity of Two-Dimensional Graphene/ WS2 Heterostructures	6
Explore the Tribological Effects of Two N-Containing Functional Groups on O/W Emulsion	6
Elastohydrodynamic Lubrication Mechanisms of Aqueous Polyethylene Glycols	6
The Influence of Stress Concentration Caused by Surface Dimples on Tribochemical Reaction of Solid Lubricants Encapsulated in Surface Dimples	6
Experimental Study on the Expended Energy on Structural Degradation of Lubricating Greases	5
The Transition of Friction Coefficient on Graphene by the Microsphere Probe	5
Linking Molecular Structure and Lubrication Mechanisms in Tetraalkylammonium Orthoborate Ionic Liquids	5
Effect of Surface Texturing on Friction and Lubrication of Ti6Al4V Biomaterials for Joint Implants	5
Influence of Natural Serpentine on Tribological Performance of Phosphate Bonded Solid Coatings	5
Influence of Load and Position of Center of Mass on COF in Cross-Country Skiing	5
In-situ Investigation of the Onset of Cavitation Damage from Single Bubbles on Technical Alloys	5
Molecular Dynamics Study on the Mechanism of Improved Tribological Properties of Nano-ZnO with Decanol Lubrication	5
Exploring Abrasion Pattern Formation with Sliding Contact Resonance: What Timescale Determines Periodic Spacing?	5
Effect of Nickel Acetyl Acetonate as Lubricant Additive in Base Oils with Different Molecular Structure on In-Situ Formation and Tribomechanism of Carbon-Based Tribofilms of Steel-Steel Sliding Pair	5
Enhancement of a Tribometer Device Dedicated to Quasi-Static Friction Conditions Under High Pressure	5
Achieving Macroscale Liquid Superlubricity Using Lubricant Mixtures of Glycerol and Propanediol	5
Control of Static Friction by Designing Grooves on Friction Surface	5
Investigating the Roles of Protein on the Cobalt Alloy Surface Degradation for Biomedical Implant Through Tribocorrosion Mechanisms	5
Some Remarks on a Recent Wear Theory	5
Influence of Atmosphere on Carbonaceous Film Formation in Rubbing, Metallic Contacts	5
Tribological Properties of Bi2S3/MoS2 Composite Coatings Deposited on Biomimetic Leaf Vein Textured Surfaces	5
Correction to: On the Gravity-Driven Sliding Motion of a Planar Board on a Tilted Soft Porous Layer	5
On Ski–Snow Contact Mechanics During the Double Poling Cycle in Cross-Country Skiing	5
The Role of the Transfer Layer on the Sliding Wear Behaviour of a Cu-15Ni-8Sn Alloy Under Different Loads	5
Unraveling Adhesion Mechanisms: Exploring the Impact of Thickness on Viscoelastic Layers and Wavy Profiles	5
Influence of the Structure of Salicylic Acid Analogue Molecules on the Formation of Tribofilms in Di(2-ethylhexyl) sebacate	5
Understanding the Tribological Behavior of Graded (Cr,Al)N + Mo:S in Fluid-Free Friction Regime	5
Effect of Electrical Current on the Tribological Property of Cu-Graphite Brush	5
In-Situ Observation and Discrete Element Simulation of Solid Graphite Lubrication Mechanism	5
Effect of Alternating Magnetic Fields on the Tribological Behaviors of Steel/Steel Contact Under Dry Sliding Conditions	4
Effect of Counter Material on Tribological Properties of CoCrMoSi Alloy	4
Impact of Relative Humidity on the Formation of Low-Frictional Interface and its Continuity in Tribological Systems with Hydrogenated Carbon Nitride Coatings	4
Transient High Friction Dominated by High Shear Strength Residual Water Film	4
Two Strategies to Mitigate Thermally-Induced Material Buildup in Heat-Assisted Magnetic Recording	4
On the Effect of Adhesive Strength and Scratching Depth on Material Transfer During Nanoscale Scratching	4
Solid Lubrication on Hard Metal Specimens with Micropits Under Normal and Elevated Temperatures	4
Liquid Bridge Modulated Friction: From Millimeter to Nanometer	4
Semi-Analytical Prediction of Starved Line Contacts Considering Oil Transport	4
Nano and Sub-nano Scale Friction Behavior in Rotary Processing of 6H-SiC with Different Off-Axis Angles	4
Molecular Simulation of Contact/Separation Behavior of Platinum Surfaces with Adsorbed Acetylenes	4
Application of Oxide Wear Models to Radial Fretting	4
Friction and Degradation of Graphite: A Nanotribological Approach	4
On the Dependence of Static Friction Coefficient on Normal Load	4
Friction Enhancement Through Fingerprint-like Soft Surface Textures in Soft Robotic Grippers for Grasping Abilities	4
A New Numerical Simulation Method for 3D Rough Surface Topography of Shot Peening Parts with Specified 3D Roughness Spatial Parameters	4
Superficial Modulus, Water-Content, and Mesh-Size at Hydrogel Surfaces	4
Robustness and Sensitivity of the Λ*-Ratio in Microelastohydrodynamic Lubrication	4
A Coarse Grained Molecular Dynamics Model for the Simulation of Lubricating Greases	4
Wear Induced Sub-surface Deformation Characteristics of a 26 Wt% Cr White Cast Iron Subjected to a Destabilization Heat Treatment	4
The Critical Pressure for Bulk Leakage of Non-planar Smooth Surfaces	4
Long-Term Lubricity of Carbon Nanoparticle Coatings on Periodically Laser-Patterned Metallic Surfaces	4
Dependency of Lithium Complex Grease on the Size of hBN Particles for Enhanced Performance	4
Time and Spatially Resolved Raman Spectroscopic Observation for Superlubricious Frictional Interfaces of Concentrated Polymer Brushes	4
Multiscale Parametrization Of a Friction Model For Metal Cutting Using Contact Mechanics, Atomistic Simulations, And Experiments	4
Enhanced Tribological Modelling of Violin Rosin	4
Temperature Dependence of Viscoelasticity of Lubricating Oil with Adsorptive Polymer Additives Sheared in Nanogaps	4
Simulation Analysis of the Neutral and Charged Intermediate Species Produced in the Triboplasma Using the PIC/MCC Method	4