Iranian Polymer Journal

Article	Citations
Evaluation of polysaccharide-based nanofibrous membranes as intra-abdominal adhesion barriers	59
Fast solvent evaporation by experimental optimization using central composite design for one-step fabrication of superhydrophobic polypropylene surface	52
Preparation and properties of polyamide microsphere/nitrile butadiene rubber composites	45
Tunable alignment and properties of Fe3O4/natural rubber nanocomposites	33
Fabrication of chemiresistive nanosensor using molecularly imprinted polymers for acetone detection in gaseous state	29
Grafting of poly(lactic acid) by cyclodextrin extrusion reaction and its foaming properties	25
Conductive bio-epoxy/boron nitride nanocomposites: effect of combination of nanotubes and epichlorohydrin surface-modified nanosheets	24
Poly(N-isopropyacrylamide-co-maleic acid )/acylated chitosan thermosensitive hydrogels: preparation and properties	24
Polycarbonate ultrafiltration membrane modified with Mg–Al-layered double hydroxide nanoparticles for treatment of petroleum refinery wastewater	23
Kinetics study of catalytic pyrolysis of polystyrene polymer using response surface method	22
Ionic conductivity and mechanical properties of semi-interpenetrating networks based on poly(ethylene oxide)/polyvinyl alcohol/graphene oxide: a response surface methodology study	21
Carboxylated graphene oxide-reinforced polyvinyl alcohol/soy protein composite fibers: thermal and mechanical study	21
Copolyamides of poly(terephthaloyl hexylenediamine) synthesis: a comparative study of mechanical and thermal properties	20
Optimizing drilling parameters for unidirectional glass fiber/nanoclay-epoxy matrix composites using gray relational analysis and response surface methodology	20
pH-responsive nanoparticles based on sodium dodecylbenzene sulfonate and polyamine-modified cyclodextrins for controlled release of metformin hydrochloride	19
Abrasion resistance of cenosphere-reinforced thermoplastic composite for tribological applications	19
Design and fabrication of composite gradient scaffold of PCL/silk fibroin/collagen for urethral tissue engineering	19
Greener tannin–resorcinol–formaldehyde adhesive derived from Acacia mangium for the manufacture of multiply bamboo panel products	19
Supercapacitor performances of titanium–polymeric nanocomposites: a review study	18
Effect of NBR and organoclay contents on physical gelation of the uncured EVA/NBR/OMMT nanocomposites	18
Agro-byproduct-based hydrophobic polyurethane films/coatings: synthesis, characterization and electrochemical impedance spectroscopic analysis	17
Addition of carboxylated styrene–butadiene rubber in cellulose nanofibrils composite films: effect on film production and its performance	16
Iranian Polymer Journal 30th anniversary issue	16
Mechanisms contributing to the axial stiffness of rubberized coil spring: a finite element analysis on effective parameters	15
A study on the synergetic effects of self/induced crystallization and nanoparticles on the mechanical properties of semi-crystalline polymer nanocomposites: experimental and analytical approaches	15

Novel expandable graphite/dimethyl methyl phosphonate/bio-based rigid polyurethane foam composites: flame retardancy and physicomechanical properties	15
Tuning adhesion/cohesion properties of water-borne pressure-sensitive adhesives through rigid core–soft shell structured particles design: effect of amino resins cross-linkers type	15
Synthesis of poly(4-aminosalicylic acid) through enzymatic and oxidative polycondensation by H2O2 oxidant	15
Application of ultrasonic radiation for the development of polypropylene/multi-walled carbon nanotubes nanocomposites and its effect on the PP chemical degradation	15
Variation of coating thickness in blade coating process of an upper-convected Jeffery’s fluid model	14
Preparation and characterization of durable flame retardant cotton fabrics using phosphorylation reaction of cellulose with ammonium etidronate	14
Lignins of various taxonomical origins: structural features, adsorption and antioxidant properties	14
Films made of potato starch from industrial potato stragglers and polyethylene: physicochemical, thermal, and mechanical properties	13
Immobilization of chitosan on polyether ether ketone surface modified with acrylic acid by UV-induced graft polymerization	13
Natural environment aging of virgin and recycled poly(lactic acid): a comparative study on outdoor weathering, seawater and river water	13
Fabrication of a novel latex-based membrane for oily wastewater filtration: effect of degassing on the properties of membrane	13
Charge transfer interactions. Part I. Studying new systems of polymers with different partners in solution and solid state	13
Isothermal crystallization kinetics of bio-based semi-aromatic high-temperature polyamide PA5T/56	13
Effective oil spill cleaned up with environmentally friendly foams filled with eucalyptus charcoal residue	13
Hybrid silica–sodium lignosulfonate nanoparticles for the controlled release of azadirachtin	12
Efficient adsorption of heavy metal ions chromium (III) by modified corn starch/GO composite aerogel	12
Enhancing electrical conductivity of gum ghatti-grafted poly(N-isopropyl acryl amide-co-acrylic acid) using CoFe2O4 nanoparticles	12
Investigating the thickness of patterned polyethylene layers by changing the line speed and temperature in the embossing machine	12
Synthesis of azobenzene liquid crystal elastomers with photo-thermo synergistic response and reversible bidirectional shape memory	12
Biodegradable, biocompatible, and self-healing, injectable hydrogel based on oxidized Azadirachta indica gum and carboxymethyl chitosan through dynamic imine-linkage for biomedical application	12
Enhancing the electromagnetic induction shielding property in resole resin composites using modified graphite compounds and shielding analysis	12
Sustainable hybrid nanoparticle reinforced low-density polyethylene: emerging materials for engineering applications	11
Anti-corrosive efficacy of indanyl methacrylate copolymers ratio on mild steel in salt water and DFT investigations	11
Polysilsesquioxane reinforced cardanol derived elastomeric thermoset: preparation, characterization and properties	11
Advanced characterization of 3D printed polyolefin elastomer-carbon black composites: cyclic mechanical behavior, thermophysical properties, and morphological analysis	11
Biopolymers: a comprehensive review of sustainability, environmental impact, and lifecycle analysis	11
Renewable resources based on tetrafunctional epoxy resin: synthesis, characterization and application in carbon fiber composites	11
Effect of transfer film morphology on the wear rate of SiC/PTFE composite	11
Competitive effects of centrifugal force and electric field force on centrifugal electrospinning	11
Lignin-based anti-UV functional materials: recent advances in preparation and application	11
Cylindrical polyester/calcium peroxide oxygen-releasing microparticles: molecular dynamics simulation and experimental analyses	11
Sulfur and nitrogen co-doped carbon quantum dots/polyurethane nanocomposite as a new fluorescent sensor for highly sensitive and selective detection of toxic mercury (II) ions	11
Polyphosphazene nanotubes/carbon fibers hierarchical hybrid reinforcement for improving interfacial adhesion of polyamide 6 composites	10
Discarded custard apple seed powder waste-based polymer composites: an experimental study on mechanical, acoustic, thermal and moisture properties	10
Development and evaluation of grape and fig leaf extracts-modified polyvinyl alcohol composite packaging films	10
Effects of processing conditions on the phase morphology and mechanical properties of highly toughened polypropylene/polybutylene terephthalate (PP/PBT) blends	10
Tensile strength and impact toughness of carbon/glass fiber hybrid composites with surface crack	10
Rubber composites based on renewable resources and their potential for application in flexible wearable antennas	10
Flow characteristics of degraded polypropylene-co-ethylene kaolin composite extruded at different temperatures and extrusion cycles using single-screw extruder	9
Modification of compressive characteristics in 3D printed polyolefin elastomers/polypropylene blend structures through polypropylene content and infill density adjustment	9
Direct measurement of microfibril structures in polyacrylonitrile fibers during carbon fiber manufacturing process	9
Carboxymethyl cellulose hydrogel for pH-responsive drug release of curcumin	9
Study on polymerization conditions in homo- and copolymer syntheses of norbornene/1-hexene with nickel-based late-transition metal catalyst	9
Maghnite: an innovative inorganic reinforcement used in the synthesis of polystyrene nanocomposites with optimized thermal and mechanical properties	9
Graphene nanoplatelets/organic wood dust hybrid composites: physical, mechanical and thermal characterization	9
Microencapsulation of Thymus fontanesii extracts in pectin/casein: characterization, release behavior and storage stability	9
Effects of NR/SBR ratio on mechanical properties and artificial mechanical performance of anti-vibration bushings	9
Cellulose nanocrystals effect to improve mechanical properties of epoxy-based glass fiber-reinforced composites	9
Anticandidal action of polyurethane foam: a new modifier with functionalized isothiouronium group	9
All-polyethylene compositions of ultrahigh molecular weight polyethylene (UHMWPE) synthesized in one-step ethylene polymerization with combinations of zirconocene and iron-based catalysts	9

Surface modification of membrane bioreactor by hybrid halloysite nanotubes for industrial wastewater treatment containing heavy metals	9
A new stable aliphatic tertiary poly(amic acid) and its application in mechano-Knoevenagel condensation: synthesis and characterization	9
Biotribological properties of nano zirconium dioxide and hydroxyapatite-reinforced polyetheretherketone (HA/ZrO2/PEEK) biocomposites	9
Effects of date seed and graphite fillers on the mechanical and thermal properties of vinyl ester matrix composites	9
Polypropylene/pecan nutshell/ammonium polyphosphate biocomposites: a flame-retardant behavior	9
β-Cyclodextrin mediated efficient removal of rose Bengal using chitosan/sodium alginate/graphene oxide nanocomposite: a comparative study	9
Design parameters of a Kagome lattice structure constructed by fused deposition modeling: a response surface methodology study	9
Dendritic polyurea microcapsule: a slow release nitrogenous fertilizer	8
Polysaccharide-based blend films as a promising material for food packaging applications: physicochemical properties	8
Experimental and multi-scale modeling research on the dynamic tensile properties of open-hole CFRP laminates subjected to strain rates of low to medium	8
Cassava starch films: effect of polyvinyl alcohol on films’ water diffusion, permeation and sorption behavior and mechanical properties	8
Core–shell carbon nanotubes/cobalt copper hydroxide hybrid/silicone rubber composite: flame retardancy and antistatic properties	8
Fluorinated ethylene-propylene copolymer thermal degradation with its effect on copolymer physical and structural properties	8
Improvements in compatibility and properties of biocomposites modified through nanosilica attachment	8
Carbon black/ethylene propylene diene monomer (EPDM) rubber as polymer electrolyte membrane fuel cell gaskets: mechanical and chemical assessment	8
Transesterification of poly(butylene adipate-co-terephthalate) (PBAT) and poly(butylene succinate) (PBS) blends: variations in some processing parameters	8
Modified nanoparticle geothermal silica in rubber composites: mechanical properties and vulcanization kinetics	8
A facile and green pre-dispersion method for the preparation of epoxide-functionalized natural rubber/silica nanocomposites with improved mechanical properties	8
Preparation of rare-earth LDHs stabilizers and their effects on the thermal stability of poly(vinyl chloride)	8
Improvement of hydrophilicity of Natural Rubber Latex/Potato-Starch blend by grafting with hydrophilic monomers	7
Synergistic improvement of structural evolution during pre-oxidation of polyacrylonitrile fibers by adding an oxidant and microwave heat treatment	7
Synthesis of Hydroxyl Terminated Fatty Ester Amide (DFEAm) from Dehydrated Castor Oil (DCO) and its Utilization in Various Polyurethane Coating Applications	7
The role of oxidized polyethylene wax in processing and crystallization of isotactic polypropylene in WPC composites	7
Poly(lactic acid)/vinyl acetate ethylene blends: effect of crosslinking on their rheological, mechanical and thermal stability behavior	7
Synthesis of doxorubicin pro-drug nanoparticles based on poloxamer188 and studies on their in vivo bio-security and in vitro anti-tumor activities	7
Long-chain branched copolyesters based on butylene succinate and ethylene terephthalate: synthesis, characterization, thermal and rheological properties	7
Calix[4]arene phosphonato derivative as a novel and capable processing aid agent for improving dynamic, mechanical, and thermal behavior of tire tread rubber compounds	7
Antimicrobial and mechanical performance of epoxy/graphene-based powder coatings	7
Synthesis and applications of a new type of 1,4-diaminophenyltetraglycidyl amine	7
Functionalized lignin magnetic composites and their absorption capability for methylene blue and methyl orange in aqueous solution	7
A novel polycaprolactone/rice husk ash/hydroxyapatite biopolymer composite for bone implant: physico-mechanical and biodegradable analysis	7
Improved thermal conductivity of immiscible polyamide 6 (PA6)/polyolefin elastomer (POE) blend by controlling selective localization of aluminum nitride (AlN)	7
Ramie natural fibre-reinforced biodegradable composites: mechanical, absorption and thermal behaviour study	7
Poly(L-lactic acid)/poly(ethylene oxide) electrospun scaffold containing dexamethasone-loaded TiO2–alendronate mesoporous nanoparticles utilized for bone tissue engineering application	7
Ultra-fast setting rate of a new bioactive binder for bone repair	7
Statistical analysis of radiation crosslinking process parameters on the mechanical properties of poly(vinyl chloride) using the Taguchi method	7
Improved oil recovery by 3D hydrogel composite reinforced with natural bentonite nanoparticles	7
Thermal stability of flexible polyurethane foams obtained from reactive phosphorus-containing polyols dispersed in polyethylene glycol	7
Polyimide synthesis and characterizations: DFT-assisted computational studies on structural units	7
Chitosan/sodium alginate hybrid membranes modified by zeolitic imidazolate framework-90 for pervaporative dehydration of butanol	7
Biocomposites derived from esterified rice starch reinforced with microcellulose fiber	7
Reactive extrusion foaming of poly(lactic acid): tailoring foam properties through controlling in-process chemical reactions	7
Friction and wear characteristics of anti-skid masterbatch filled acrylonitrile butadiene styrene (ABS) based polymer composite using Taguchi and machine learning techniques	7
Flame-retardant epoxy resin: synergistic effect between aluminum diethylphosphinate and piperazine pyrophosphate	7
Curing kinetics effect on thermo-mechanical properties of an epoxy resin cured by imidazolium-based ionic liquid	6
Thermal imaging approach towards analyzing tribological response of UHMWPE-based hybrid nanocomposites	6
Antibacterial cellulose papers loaded with different isolated active compounds for food packaging applications	6
Amine-functionalized radiation-grafted nylon-6 fibers: synthesis and adsorption performance for diclofenac sodium	6
Use of cellulose fiber from Jipijapa (Carludovicapalmata) as fillers in corn starch-based biocomposite film	6
Development of polyvinyl chloride composites with enhanced mechanical properties using modified ceramic particles	6
Poly(aniline-co-melamine)/polyurethane coating as a novel microwave absorbing material for potential stealth application	6
In-vitro drug release and stability assessment of tailored levan–chitosan biocomposite hydrogel	6
Development of glass fiber/unsaturated polyester-like resins based on modified castor oil	6
Baghdadite reinforced polycaprolactone scaffold for bone tissue engineering	6
New highly efficient psyllium and sodium vinyl sulfonate-based adsorbent for Hg2+ ions	6
Thermal and mechanical enhancements in polyimide/basalt fiber composites through mineral-based nano-dust particles	6
P–O codoped g-C3N4/poly(aniline) as heterogeneous photocatalyst for PET-RAFT polymerization	6
Bioactive chitosan sulfonamide hydrogels and nanohydrogels: design, synthesis and characterization	6
Effects of marine environment on frictional properties of porous oil-impregnated ɑ-Al2O3/UHMWPE composites and molecular dynamics simulation	6
Epoxy-alumina functionally graded nanocomposites: gradation and morphological effect of alumina on impact strength and viscoelastic properties	6
Fabrication of microcapsule particles by electrospray and their use as latent curing agent for epoxy resin	6
Evaluation of the potential of topically applied salicylic acid-encapsulated chitosan nanoparticles to protect tomato against Fusarium wilt	6
Polyvinyl pyrrolidone-chitosan blend membrane for pervaporation separation of trimethyl boratemethanol mixture	6
Influence of sea sand reinforcement on the static and dynamic properties of functionally graded epoxy composites	6
Conductivity and mechanical properties of carbon black-reinforced poly(lactic acid) (PLA/CB) composites	6
Copper nanoparticles incorporated membranes for comprehensive treatment of surface water: synthesis and characterization	6
Properties of wood polymer composites based on polypropylene/olive wood flour: effects of fiber treatment and compatibilizer	6
Improving proton conductivity of poly(oxyphenylene benzimidazole) membranes with sulfonation and magnetite addition	6
Effect of twin-roll temperature and interface adhesion on ablative performance and char structure of ethylene propylene diene monomer-based ablative insulator	6
A comparative study of graphene oxide or chemically reduced graphene oxide filled poly(ethylene terephthalate)/poly(butylene terephthalate)/graphene nanocomposites	6
Potential use of natural fiber-reinforced polymer biocomposites in knee prostheses: a review on fair inclusion in amputees	6
Simple cationic polyacrylamide: a drag reducer	5
Effects of different curing regimes of “hybrid fiber metal laminates (HFMLs)” curing process by finite element method	5
Epoxy/cashew nut shell liquid hybrid polymer composite reinforced with sisal fiber mat and stainless steel wire mesh: mechanical and thermal behavior study	5
Inorganic particles/silica/polyacrylamide nanocomposite: as a potential application in water treatment	5
Polylactide/polyvinyl acetate blends containing different molecular weights of poly(ethylene glycol)	5
Enhanced electromechanical actuation in acrylic elastomer foam using barium titanate and Ketjenblack dispersed interpenetrated polymer network	5
Synthesis of a preformed hydrogel based on polyacrylamide and related gel-breakers with potential application for conformance control	5
Polyvinyl alcohol–sodium niobate–cellulose nanofiber composites: dielectric and electric study	5
Nature-derived otolith loaded polyethylene glycol-polycaprolactone electrospun composite nanofiber membranes: preparation, characterization, and biocompatibility evaluation	5

Designing an antifungal smart release container based on halloysite nanoparticles loaded with thyme extract: fabrication of a long-term antifungal coating for PMMA dental material	5
Polymer nanoparticles of [(1-methyl-(S)-4,5-dihydroorotyl)-histidyl-prolinamide] as a potential central nervous system antidepressant formulation and their scale-up studies	5
Polypropylene toughened with ethylene-n-butyl acrylate-carbon monoxide terpolymer: structure–property relationship	5
Thermal and crystalline properties of biodegradable PCL/PBAT shape memory blends	5
Gamma-irradiated recycled polyethylene filled with Tectona grandis (teak) leaf powder: a method for upcycling of polyethylene	5
Catalytic action of natural clay on polyolefins during reactive processing	5
Facile synthesis of nanocellulose from wheat straw as an agricultural waste	5
Dual- and triple-shape memory properties of cross-linked recycled polyvinyl butyral/polyvinyl chloride binary blends	5
Effect of modified zeolite on properties of poly(lactic acid)/poly(ethylene oxide) composite film for extended shelf-life of Dendrobium orchids	5
Resin pressure monitoring method and variation in autoclave processing of polymer composite laminates using capillary sensors	5
Polyvinylidene fluoride as a neat and the synthesized novel membranes based on PVDF/polyvinyl pyrrolidone polymer grafted with TiO2 nanoparticles through RAFT method for water purification	5
Simulation of a crossflow ultrafiltration polysulfone/polyvinylpyrrolidone membrane separation using finite element analysis to separate oil/water emulsion	5
Molecularly imprinted CaCO3/polydopamine hybrid composite for selective protein recognition	5
Novel biopolymer-based hydrogels obtained through crosslinking of keratose proteins using tetrakis(hydroxymethyl) phosphonium chloride	5
Synergistic effects of aramid fibre and resorcinol-formaldehyde-latex-coated aramid fibre on improving the wear resistance of nitrile rubber composites	5
Investigation of antibacterial activity of one-dimensional electrospun Walnut green husk extract-PVP nanofibers	5
Investigation of mechanical and printing properties of poly(lactic acid) and its composite filaments used in 3D printing	5
Removal of diclofenac sodium pollutant from drug contaminants using a hyper-cross-linked polymer adsorbent	5
Linear and non-linear rheology of high molecular weight polyethylene filled withFe2O3-treated graphene nanofiller	5
Vanillin-derived phosphorus-containing aromatic imine for flame-retardant polyurethane coating	5
Controllable preparation of novel PPTA/UiO-66-NH2 nanofiltration membrane with nanoscale striped structure for dye wastewater separation	5
Polyamide 6/MXene-grafted graphene oxide hybrid nanocomposites	5
Isolation, characterization and evaluation of pineapple crown waste nanofiber gel entrapping ampicillin in topical bacterial infections	5
Fabrication of cellulose–chitosan composites aerogel from agricultural wastes for food packaging	5
The degradation of poly(1-butene) extrudates subjected to artificial and natural aging	4
Peroxide cross-linking and its role on the rheological, mechanical and thermal properties of poly(butylene adipate-co-butylene terephthalate)	4
Viscoelastic and heat-resistant behavior of surface-treated areca fruit husk fiber-reinforced polymer composites	4
Saccharum barberi grass bagasse ash-based silicone rubber composites for electrical insulator applications	4
Poly(N-vinyl imidazole)/nitrogen-doped graphene quantum dot nanocomposite hydrogel as an efficient metal ion adsorbent of aqueous systems	4
Chain degradation of peroxide/silane macro-crosslinked poly (lactic acid): pretreatment, mechanical and thermal study	4
The pore size effect on the degradation, tensile properties and cell viability of polycaprolactone/starch scaffold: experimental study	4
Load- and time-dependent three-body abrasive wear in short carbon fiber- and cenosphere-reinforced polymer composites using machine learning approach	4
Chitosan/polyvinyl alcohol/tannic acid multiple network composite hydrogel: preparation and characterization	4
Enhanced smoke/toxicity suppression of intumescent flame retardant thermoplastic polyurethane composites with the addition of graphene	4
Benzothiazole-based poly(phenoxy-imine)s containing ethoxy and methoxy units: synthesis, thermal and optical properties	4
Flame retardant polyvinyl alcohol composite with excellent comprehensive properties prepared using Cu2O/chitosan and phosphorus-based flame retardants	4
Theoretical and experimental analyses of rheological, compatibility and mechanical properties of PVMQ/XNBR-g GMA/XNBR/GO ternary hybrid nanocomposites	4
Perspective on opportunities of bio-based processing oil to rubber industry: a short review	4
Grafted barley husk/poly (vinyl alcohol)/starch composite films: effect of fatty acid chain length and grafted barley husk loading	4
Carbon/epoxy composites reinforced with carbon nanotubes and hollow glass microspheres: mechanical characterization	4
Taraxacum kok-saghyz L.E. Rodin, as a novel potential source of natural rubber in Iran: a good candidate for commercial use	4
Unveiling transformative potential: recent advances in graphene-based polymer composites	4
Accelerated degradation mechanism and mechanical behavior of 3D-printed PLA scaffolds for bone regeneration	4
Characterisation of Silver-coated Teflon fabric-reinforced Nafion ionic polymer metal composite with carbon nanotubes and graphene nanoparticles	4
Waste mica and carbon black filled natural rubber composites: a comparative study	4
Effects of lignin-based flame retardants on flame-retardancy and insulation performances of epoxy resin composites	4
Alkali-treated date palm fiber-reinforced unsaturated polyester composites: thermo-mechanical performances and structural applications	4
Impact properties of carbon fibers-epoxy composite/aluminum laminates: effect of cryogenic and thermal aging	4
Influence of melamine cyanurate and boehmite on flame retardancy of PA6	4
Production of environmentally benign poly(hydroxybutyrate)/silver bionanocomposites reinforced with ZnO for active packaging of bread	4
Performance-based natural rubber composites reinforced with jute fibers and nano-silica: thermal, morphological, and mechanical studies with statistical optimization	4
Advanced developments in carbon nanotube polymer composites for structural applications	4
Renewable starch/polyvinyl alcohol nanocomposite foams reinforced by cellulose nanofibers isolated from carrot residues using a chemo-mechanical process	4
Thermal programming of triple-shape-memory epoxy with flexible segments and Diels–Alder networks	4
Synthesis of polyacrylamide copolymers cross-linked by chitosan hydrogels with potential application for conformance control of petroleum reservoirs	4
Plain Kevlar and a CNT-reinforced Kevlar epoxy polymer composite: Comparative study of its mechanical, low velocity and ballistic impact properties	4
Study on the structure evolution and temperature zone regulation mechanism of polyacrylonitrile fibers during pre-oxidation process	4
Pore size-adjustable carboxymethyl cellulose aerogels: effect of substitution degree and TEOS/anhydrous ethanol ratio	4
Manganese dioxide nanoparticle coated graphene oxide hybrid nanofiller: its effect on structural, thermal, and dielectric properties of polyaniline ternary nanocomposites	4
Effect of calcium peroxide particles as oxygen-releasing materials on cell growth and mechanical properties of scaffolds for tissue engineering	4
Vinyl acetate content influence on thermal, non-isothermal crystallization, and optical characteristics of ethylene–vinyl acetate copolymers	4
Strong and tough conductive silk fibroin/poly(vinyl alcohol) composite hydrogel by a salting-in and salting-out synergistic effect	4
Optimization of processing parameters in poly(lactic acid)-reinforced acetylated starch composite films by response surface methodology	4
PLA-based composite film reinforced with empty fruit bunch fiber and silica for food packaging applications	4
Modification of polyvinylidene fluoride through homogeneous reaction for preparation of hydrophilic membrane	4
Internally functionalized MnO2 nanotubes in modification of thin-film nanocomposite membranes for water and wastewater treatment	4
Sustainable polyurethanes from biomass-derived furanic polyols for adhesive applications	4
Effects of modified titanium dioxide nanoparticles on the thermal and mechanical properties of poly(l-lactide)-b-poly(ε-caprolactone)	3
A polymer resin matrix modified by coconut filler and its effect on structural behavior of glass fiber-reinforced polymer composites	3
Bovine dentin collagen/poly(lactic acid) scaffolds for teeth tissue regeneration	3
An experimental analysis on thermal performance of interloping threaded cooling channels in injection mold cavity	3
Waste sunn hemp fibres/epoxy composites: mechanical and thermal properties	3
Sorption behavior of ethyl acetate aqueous solutions through a polyvinyl alcohol/tetraethoxysilane/perfluorosulfonic acid hybrid membrane: an experimental study	3
Synthesis of cinacalcet containing acrylamide hydrogels by photopolymerization and studying their sensing properties	3
Unveiling the impact of particle size on the physio-mechanical properties of eco-friendly polymer composites	3
Advancements in natural membrane-based electrochemical biosensors for detecting endocrine-disrupting chemicals in food and environmental monitoring	3
Anti-bacterial, anti-oxidant activities of polymer-based metal complexes and their catalyst effects in presence of H2O2	3
Ameliorated microgel for bimetallic Ag/CuO nanoparticles and their expeditious catalytic applications	3
Adsorption of methylene blue from aqueous solutions using carboxyl/nitro-functionalized microparticles derived from polypropylene waste	3
Rosin-derived porous microspheres with robust selective cationic dye adsorption	3
Schiff base of O-carboxymethyl chitosan and its complexes with transition metal ions: syntheses, structural, antimicrobial and thermal studies	3
Silver nanoparticles-coated 2D glass-flakes reinforced polyurea composites with high thermal conductivity, acceptable toughness and thermal stability	3
Preparation, characterization and controlled release study of poly(urea–formaldehyde) microcapsules enclosing Pretilachlor herbicide	3
Effect of one-step dipping coating process on microstructure and tribology of polypropylene/graphene oxide/carbon nanotube nanocomposites	3
Luffa and Kevlar fiber/nanoclay sustainable thermoset biocomposites: acoustic and tribo-mechanical study	3
Characterisation and density functional theory study of epoxy–microcrystalline cellulose primer coating	3
Non-isocyanate epoxy vinyl ester urethane prepolymer based on diglycidyl ether of bisphenol-A	3
A review on in situ gels as polymer drug carriers in the treatment of periodontitis	3
Modified radiopaque polyetheretherketone implants: in vitro and in vivo study	3
Morphological, thermal and viscoelastic behavior of recycled high density polyethylene nanocomposite incorporated with 1D/2D nanofillers	3
Epoxy/aminopropyl isobutyl-polyhedral oligomeric silsesquioxane (POSS) nanocomposites: preparation and studying the mechanical, thermal, and corrosion properties of the systems	3
Charge transfer interactions. Part II. Usefulness of multiangle laser light scattering studies	3
The gel content effect on rheological and physical properties of cured acrylonitrile-butadiene rubber/poly(ethylene-co-vinyl acetate)/organo-montmorillonite nanocomposites	3
Effects of TiO2 and GO nanoparticles on the thermomechanical properties of bioactive poly-HEMA nanocomposites	3
Fracture mechanisms and failure analysis of PA6/NBR/graphene nanocomposites by essential work of fracture	3