Materials and Manufacturing Processes

Article	Citations
Effects of protective materials on the sintering properties of Zn4Sb3	115
One-shot drilling process for thin CFRP/Aluminium alloys stacks	106
Magnetic field-assisted ECDM of SiC p /Al composites: process optimization and validation	105
Micro-feature fabrication on SS304 stainless steel using WEDM process	76
Micro-electrical discharge machining of nitinol alloy using coated electrode and multi-energy field	76
Effect of filler material on the microwave joining of SS-430 steel	70
Simulation and experimental studies on surface quality of vibration-assisted ECM	70
Experimental investigations and optimization of non-electrical parameters during microelectrode fabrication	54
Effect of substrate annealing temperature on the EMPW performance of magnesium–aluminum alloys	52
Influence of Cu/Ni interlayers on rotary friction welded dissimilar SS321–Ti6Al4V joints	46
Investigation and optimization of parameters for bidirectional composite vibratory finishing of gears	45
Investigation into electrically-assisted rolling of superalloy array microgroove structure	44
Optimization of process parameter in AI7075 turning using grey relational, desirability function and metaheuristics	38
Micro-machining of SDSS-2507 under comparative assessment of fiber laser scan techniques	37
Investigation of hole morphology in 3D printed CFRP composites during femtosecond laser micro-drilling process	36
Performance comparison of EDM oil and biodiesel flushing media while µED milling of Inconel 718	35
Vacuum assisted resin transfer molding of carbon fiber reinforced polymer: influence of vibration	33
AAJC parameter interaction and hybrid abrasives investigation on processed Ti-Alloy fibre laminate	32
A comprehensive parametric study on abrasive waterjet trepanning of Al-6061 alloy	31
Electrochemical machining of titanium alloy blades using optimized cathode with built-in insulators	31
High-energy acoustic beam-assisted additive manufacturing of ZL114A aluminum alloy for complex components: residual stress reduction and deformation control	30
Arc characteristics and weld formation of aluminum alloy by AC/DC mixed GTAW	30
Mechanism of bonding during laser transmission welding using EIP absorber	29
Micromachining of Al7075 alloy using an in-situ ultrasonicated µ-ECDM system	29
Optimizing the plastic injection molding process and reducing warpage through response surface methodology	27

Research on multi-channel reciprocating vibration discharge machining of titanium alloy	27
Evaluation of multi-layered Al foils to Cu tab ultrasonic welds for Li-ion battery applications	27
Hybrid cooling-lubrication in milling Inconel 718: scCO 2 -Assisted MQL and OoW performance	26
Selective surface area modification of Al-7075 using micro-nano-sized PM green compact in EDC	26
Experimental investigation on machining of multiple micro-square holes	25
Recycling of spent lithium-iron phosphate batteries: toward closing the loop	24
Enhancing titanium alloy turning via cryogenic liquid nitrogen cooling	24
Reciprocating vibration multi-channel atomization ablation-electrolysis-chemical composite machining of aluminum matrix silicon carbide	23
Investigation into the sheet metal forming process using solid granules medium with graphite powder addition	23
Research on punching quality in alternate punching with electro-permanent magnetic method	23
Multi-attribute optimization of AWJM parameters on hybrid kevlar/SS wire mesh epoxy composites	22
Influence of electrochemical machining on shape memory and surface characteristics of nickel-titanium-cobalt shape memory alloy: An experimental study	22
Investigation of ablation threshold and microchannel fabrication on stainless steel using ultrafast laser	22
Plasma synthesis of ammonia by asymmetric electrode arrangement	22
Strengthening Al-Cu ultrasonic spot welds using Ni interlayer for superior joint performance	21
A review on wire arc additive manufacturing based on cold metal transfer	21
Studying the performance of pressurized injection lubrication in drilling operations	20
Non-contact flank modifications of spur gears using cathodic gear tools and mechanisms: an experimental study	20
A new technological parameters mathematical modeling in ultra-precision machining of Zinc Germanium Phosphide crystal via chemical-mechanical polishing	19
Review of tool geometry in the processing of aluminum alloys by FSW	19
Optimization of welding parameters for BCTW-GIA single-pass welding using RSM	19
Restraining warping of SLS sand mold via phenolic resin composites	19
Machinability characteristics of titanium diamond using EDM and its parametric optimization	19
Processing techniques for the fabrication nozzle struts: enhancing, efficiency of the micro turbine	19
Development of submerged arc welding flux from rice straw ash	18
Dissimilar laser welding of NiTi to Ti6Al4V via Zr interlayer	18
Friction stir processing based surface modification of AZ31 magnesium alloy	18
Investigations on tip relieving of spur gears by non-contact process	17
Preparation of single site dispersed copper catalyst by SCFD method	17
Analysis of drilling behavior of flax/PP composites	17
Effect of electrode materials and process parameters on deposition characteristics during GMAW-AM	17
Fabrication and performance evaluation of muscovite-incorporated PSF-PVP polymer membranes	17
Optimization of process parameters in laser cladding multi channel forming using MVBM-NSGA-II method	17
Processing of AISI304 material with novel textured tools under sustainable manufacturing practice	17
GAASP: Genetic Algorithm-Based Atomistic Sampling Protocol for High-Entropy Materials	17
Assessment of electro-discharge machining for nimonic C-263 utilizing aluminum powder-infused green dielectric	17
Nanofinishing of DED topologically optimized fixation plates with H-ECMR finishing	16
Determination of process parameters for selective laser melting of inconel 718 alloy through evolutionary multi-objective optimization	16
Multi-axis near-dry Electrical Discharge machining using inconel 718 alloy	16
An investigation on wire-EDM of a biodegradable ZE41A magnesium alloy	16
Comparative study of dry machining performance using hybrid textured cutting insert	16
Optimization of parameters for drilling composite materials with freeform surfaces	16
Advancements in micromachining of additive manufactured materials: a comprehensive review	16
Study on the preparation method of electrochemical grinding electrolyte for 9Cr18Mo bearing steel and the performance of oxide film	16
Self-driven micro-vibration cutting strategy and process parameters for CFRP	16
Impact of fluid abrasive viscosity on machining performance	16
Novel perspectives on machining and surface metallurgical characteristics of X40CrMoV51 in two different heat-treated states with finishing-PMEDM operation	15
Drilling-induced damage suppression on CFRP/Ti-6Al-4V stacks using textured drills	15
Investigation of electrolyte intermittent commutation effects on electrochemical machining	15
Effect of fill pattern on flexural performance of FDM printed PLA	15

Steel slag as a low-impact filler in rubber compounds for environmental sustainability	15
Performance evaluation of cryogenic treated and untreated brass electrode in wire-EDM	15
Feasibility of Jatropha and Rice bran vegetable oils as sustainable EDM dielectrics	15
Optimization of cooling condition and energy parameters during laser bending of Duplex-2205	14
Alumina ceramic insulation layer for strain sensor fabricated by direct laser deposition	14
Enhancing titanium alloy surface quality in high-speed counter-rotating electrochemical machining	14
Continuous caster final electromagnetic stirrers position optimization using genetic programming	14
On surface texture evolution in abrasive flow machining	14
Preparation of high-strength and low-shrinkage composite salt cores by binder jetting and vacuum impregnation	14
Synthesis, processing and phase analysis of quasi crystal particle reinforced aluminium matrix composite	14
Optimization of laser-assisted clinching process for 5182 aluminum alloy	14
Effect of machining parameters in turning under different cooling conditions	14
Enhancing the borosilicate glass micromachining by using mixed alkaline electrolytes in the ECDM process	13
Abrasive waterjet drilling process enhancement using machine learning and evolutionary algorithms	13
A novel method for in-situ successive electrochemical machining of blisk using a three-layer electrode with partitioned conductive mode	13
TiO 2 nanotubes produced on thin titanium wires using aqueous electrolytes	13
Enhancing the Machining Performance during Micro-Channel Fabrication on Quartz Ceramic with Rotary ECDM Process	13
Synthetic effects of turning and shot peening on surface integrity	13
Influence of cutting speed on surface topography of turned Hastelloy C-22	13
Influence of compositions and process parameters on drilling responses of flax-steel-epoxy hybrid composites	13
Performance evaluation of developed new textured tools during turning of AISI 321 material	13
A brittle-like regime wafer dicing process with in-situ discharge dressing	13
NDEDM of Hastelloy using CNT-incorporated dielectric medium utilizing composite electrodes	13
Parametric optimization of the turning process for Mg-5Sn-3Zn-1Mn alloys	13
Experimental investigations into belt-type magnetorheological finishing of exterior surfaces	13
A hybrid process technology of SiC die separation	13
Antisymmetric deformation behavior during eccentric explosion electro-hydraulic sheet forming process	12
Hot profiled rolling of C40 steel: production variable’s effect on rolling performance	12
Role of dry media in influencing performance during processing by centrifugal superfinishing	12
Optimization of dome shape for filament wound pressure vessels using data-driven evolutionary algorithms	12
An investigation of process parameter influences on dissimilar friction stir welding of cast aluminum alloy joints	12
The effects of FFF 3D printing parameters on energy consumption	12
Study on surface formation mechanism of multiple abrasive particles under ultrasound	12
Automated arc additive manufacturing: defect suppression, process research, and application	12
Up/down processing modes effects on residual stress for belt grinding	12
Exploring tool geometry influence on EDD of Waspaloy	12
Process stability and deposition behavior of branch wire coupled arc-DED	11
Arc and molten pool behavior on quality of hybrid cold metal transfer and tandem pulsed narrow gap gas metal arc welds: a study	11
Life cycle assessment of the rolling process of thin aluminum sheets	11
Optimizing highly reflective CNC abrasive polishing on aluminum sheets	11
Development of a BDD end-grinding-milling tool with dual-negative rake angle	11
Investigation of dissolution behavior and surface integrity in electrochemical machining of nickel-based superalloys	11
Experimental Investigation of milling on Inconel718 using cryogenic-treated inserts	11
On innovative approach in ECDM process by controlling the temperature and stirring rate of the electrolyte	11
Insight into single- and bi-objective optimization of industrial problems	11
Powder mixed micro-electric discharge milling of Ni-rich NiTi SMA: an investigation on machining performance and biocompatibility	11
Aqua jet integrated fiber laser machining of quaternary NiTiCuZr alloy	11
Laser applications in GaN growth and processing	11
Efficient thermal approach for producing reduced graphene oxide from ethylene glycol derived from PET waste	11
Modelling and Optimization of Process Parameters during Grooved Hot Rolling of SAE 1020 Steel	11
Multi-objective optimization of fed-batch bioreactor for lysine production	11
Analysis of wrinkles and corrugations in the electrode calendering process	11
Investigation of single-stage incremental hole flanging of AA1050 through conical tool	11
Optimization of wet chemical etching for MRR and undercut by substrate orientation	10
Interference screws 3D printed with polymer-based biocomposites (HA/PLA/PCL)	10
Optimization of multiple responses in the laser cladding process parameters	10
Machinability characteristics of an aluminum alloy composite: a study and analysis	10
Effect of DH-shaped coil symmetry coefficient on EMPW process	10
Machining of micro-hole on nitinol alloy by UV-MFEDM process	10
Advances in polycrystalline diamond (PCD) micro drills for efficient micro-hole machining in hard-brittle materials: a review of design, fabrication, and performance	10
Effectiveness of forced cooling during laser bending of duplex-2205	10
Path pattern effects on DED-arc thin-walled structures	10
A new eco-friendly magnetorheological chemical polishing system with an improved dual-layer Halbach magnet array for Ti-6Al-4V surface finishing	10
Research on efficient oxygen-assisted atomized discharge ablation drilling of YG8 tungsten carbide	10
Optimized manufacturing process of encapsulating phase change materials in granular form using coating materials and methods	10
Deciphering the interdependent impact of process parameters in friction stir welding – Part II: extracting generalization insights from the critical review of pure metal welds	10
Dissimilar titanium-aluminum skin-stringer joints by FSW: process mechanics and performance	10
MQL turning processing of EN24 alloy steel material with novel textured tools	10
Evaluation of the effectiveness of neighbors’ selection algorithms in the random cellular automata model of unconstrained grain growth	10
Behaviors of novel manufacturing 1215MS+Bi steel in casting thermal processes	10
Finding optimum cutting conditions for augmented grindability of Ti-6Al-4V	10
Surface roughness investigation of 3D printed parts via in-situ pellet-filament co-extrusion process	10
Ultrasonic magnetic abrasive finishing of Al7075-T6 and A356.0-T6 using SiC-brush with CNT nano-lubricant	10
Ionic liquids assisted LQL for turning PH steels: smart methodology	10
Statement of retraction: Bio-inspired low elastic biodegradable Mg-Zn-Mn-Si-HA alloy fabricated by spark plasma sintering	10
Performance regulation of laser-cladded high-manganese steel coatings by laser remelting process	10
Automatic programming of robotic layup process for advanced composite materials draping	10
Development of Al/Cu/SiC bimetallic nano-composite by friction stir spot welding	9
Online visual monitoring triggered by arc voltage during one-side GTAW	9
Effect of honeycomb and rectangular textured cutting tools on inconel 713C MQL turning under different spray cooling conditions	9

Laser-Directed Energy Deposition of H13: processing window and improved characterization procedures	9
Friction stir processing of aluminum machining waste: carbon nanostructure reinforcements for enhanced composite performance - a comprehensive review	9
Impact of active chip breakers on Ti6Al4V turning process	9
A hybrid short electric arc and electrochemical machining of the Ti6Al4V alloy	9
Processing characteristics of Ni-WC MMC weld cladding by various types of GMAW	9
Analysis of discharge behavior, performance, and surface integrity in EDM of Inconel X-750 using different dielectric fluids for sustainable machining	9
Investigation of ultrasonic-assisted drilling temperature of SiC p /Al composites	9
Enhancing electrochemical micro-drilling of A286 superalloy using different tool materials	9
Differential polishing of convex Al-surface via microwave-sintered CIP-Al 2 O 3 based slurry	9
Height control in GMA-AM using external wire as controlling variable	9
Multi-objective optimization of composite kayak paddle shaft through evolutionary deep learning	9
Hole-wall temperature characteristics in thick UD-CFRP drilling by different condition	9
Composites processed through counter-rotating twin-tool FSP: processing time and material homogeneity	9
Influence of AWJM parameters on surface quality of BSHC	9
Fiber laser cutting study on ternary NiTiV shape memory alloy	9
Micromachining of borosilicate glass using an electrolyte-sonicated-µ-ECDM system	9
Performance evaluation of magnetic-field-assisted MQL turning of structural eco-composites: a hybrid optimization approach	9
EDM-Grinding composite machining and drilling of polycrystalline diamond tool	9
Deep learning-based framework for the observation of real-time melt pool and detection of anomaly in wire-arc additive manufacturing	9
Interfacial enhancement in heterogeneous material bonding: a review of strategies and mechanisms	9
The use of castor oil and beeswax as biodegradables cutting fluids on turning of AISI 1045 steel	8
Increasing importance of genetic algorithms in science and technology: Linear trends over the period from year 1989 to 2022	8
Influence of sintering on mechanical response of metal injection moulded parts	8
Influence of FSW process on dissimilar T-joint of aluminum alloy to pure copper	8
Effects of 3D-printing processing parameters on FFF parts’ porosity: outlook and trends	8
Influence of substrate bias on machining performance of TiAlN-coated drill bits	8
Experimental and numerical analysis of pulsed-electrochemical discharge process with electrolyte stirring	8
Heat generation and steel fragment effects on friction stir welding of aluminum alloy with steel	8
Comparative performance evaluation of SiC and diamond abrasives mixed with iron particles in ultrasonically assisted magnetic abrasive finishing (UAMAF)	8
Investigation of Cu-Sn-Cu transient liquid phase bonding for microsystems packaging	8
Investigation of spindle preload-induced thermal effects on milling dynamics	8
Effect of process variables on Ultimaker 2+ 3D FDM printed Tough PLA parts	8
Investigation on electroless metallized fused filament fabricated ABS parts	8
Influence of boron carbide on bonding performance of an aluminum alloy clad onto a knurled mild steel substrate: role of friction surfacing	8
Developing an offline digital twin framework for predicting surface roughness in machining of Ti6Al4V alloy	8
Multi objective optimization of parameters in EDM of Mirrax steel	8
Multi-objective optimization in electrochemical micro-drilling of Ti6Al4V using nature-inspired techniques	8
Investigation of tool life and operational efficiency of the coated electrode for machining die steels using a micro-electrical discharge machining process	8
Impact of kinematic parameters on lapping uniformity	8
Experimental study of machinability of CHSF/PR composites by end milling	8
Experimental investigations on ultrasonic assisted turning of magnesium silicon carbide	8
Investigation on formability of ribbed tube and its forming quality by MPCD process	8
Near-infrared radiation: A promising heating method for powder bed fusion	7
Investigations on homothetic and hybrid micro-textured tools during turning Inconel-718	7
Investigation of hot cracking susceptibility in welding of AA5052 aluminium alloy	7
Geometrical shape and surface quality of holes through flax FMLs	7
Investigation of surface grinding on Inconel under distinct cooling conditions	7
Machinability Studies on Commercially Pure Titanium (Grade-2) Under Cryogenic Condition	7
AWJC of NiTi interleaved r-GO embedded carbon/aramid fibre intermetallic laminates: Experimental investigations and optimization through BMOA	7
Investigation of micro-drilling in AISI H13 steel using ECMM under distinct electrolytes-finding optimal setting	7
Review of Magnetorheological polishing techniques: advances, challenges and emerging trends	7
Experimentation and optimization of deep hole drilling parameters for SS316L	7
Face/core interface strengthening process of brazed aluminum foam sandwich	7
Dimensional accuracy enhancement of machined-hole through UAECDM-process under the magnetic-field-assistance	7
Processing of multi-featured parts using sing point incremental hydro-forming	7
Novel hybrid chemical magnetorheological fluid for polishing Ti–6Al–4V alloy	7
Marine microplastics detection and filtration self-cleaning membrane processed by electrospinning	7
Surface smoothening and strengthening combined effect of mechanical hammer peening on inconel 718 superalloy	7
Experimental study on EDM of network microstructure titanium matrix composites	7
Optimizing microwave joining parameters of kenaf-reinforced polypropylene composites	7
Experimental investigations of electrical discharge machining 316L via Taguchi-Grey method	7
Research on mechanism and experimental effect of tubular electrode dimensions on electric arc electrochemical composite machining	7
Effects of electrochemical surface treatment and ultrasonic chemical treatment on morphology, topography, and chemical composition of Al 7075 alloy: a comparative study	7
Sinking ECDM micro-milling of micro-channels with a customized electrode	7
Performance of cryogenic treatment and soaking periods in textured inserts	7
Preparation of an experimental dental composite with different Bis-GMA/UDMA proportions	7
Evaluating electrochemical micromachining capabilities for industrial applications: A review	7
Ultrasonic spot welding of dissimilar Al/SS sheets with various surface conditions: an experimental investigation	7
Optimization of microwave drilling parameters for pine needles and rice husk PLA composites	7
Post-processing techniques for metal Additive Manufactured products: role and contribution of abrasive media assisted finishing	7
Establishment and experimental study of the processing parameter optimization model of Pulsed Dynamic Electrochemical Machining	7
Dry turning biomedical titanium alloy using uncoated/coated cutting inserts	6
Improving surface flatness through macro-maskless electrochemical machining with linear-gradient gap	6
Machining efficiency and geometrical accuracy on micro-EDM drilling of titanium alloy	6
Welding of pre-brazed diamond grits onto a substrate using nickel-based alloys	6
Removal of recast layer by ECM with conductive hydrogel electrolyte	6
Efficient and low-damage machining of Ti6Al4V: laser-assisted CBN belt grinding	6
Achieving high ductility in AZ31/SiC composites through unique multi-pass FSP	6
Friction stir weld processing for achieving maximum tube-to-tubesheet leak path	6
Double-layer electrowetting-aided spinning for fabrication of metal-core piezoelectric-piezoresistive composite fiber	6
Achieving effective material removal in abrasive fine-finishing with polymer-bonded elastic wheels	6
A novel modification to TW-GIA for controlling heat input of base metal	6
Effect of Cryo-treatment of wires on machining performance of WEDM	6
Experimental Investigation on Micro-Electrical Discharge Machining process for heat treated Nickel-based Nimonic 80A	6
Magnesium-based nanocomposites synthesized using friction stir processing: an experimental study	6
Processing of silicon carbide particulate reinforced aluminum alloy composites using rotary electrochemical discharge machining	6
Effect of boric acid in powder mixed EDM of Ti-6al-4V ELI	6
AI-guided optimization of manufacturing protocols for AHSS coils	6
Review on development and performance of shape memory alloy/polyimide thin-film composites	6
Experimentation of Al7075 composite material using magnetic abrasive finishing process	6
Guest editorial: boiling eggs in our genetic shoes	6
Evaluation methods of out-of-autoclave epoxy prepreg working life used in aerospace application	6
Machining holes in CFRP with laser “drilling + boring” hybrid technique	6
Development and analysis of scalable laser machined surface utilizing low power nanosecond laser on Ti-6Al-4V alloy	6
Deciphering the interdependent impact of process parameters in friction stir welding - Part I: an overview of the challenges and way forward	6