Polymers for Advanced Technologies

Article	Citations
Influence of the composition of macromolecular diols on the rheology and water absorption of polyurethane acrylate emulsions	96
A novel smart stealth sorafenib delivery system based on the magnetic imprinting material modified by polyethylene glycol	90
Effect of γ‐ray irradiation on epoxy network polymers with different curing agents	79
Radiation‐sensitive nanogel‐incorporated Fricke hydrogel dosimeters with reduced diffusion rates	77
Comparative mechanical, morphological, rheological, and thermal properties of polypropylene/ethylene‐propylene‐diene rubber blends	76
Enhanced crystallization of poly(lactic acid) bioplastics by a green and facile approach using liquid poly(ethylene glycol)	74
Preparation and mechanical properties of water‐dispersible hyperbranched polymer grafted carbon black/natural rubber composites by latex blending method	71
Melt electrowriting of poly(vinylidene difluoride) using a heated collector	68
Surface reformed anisotropic polystyrene‐block‐poly(ethylene‐ran‐butylene)‐block‐polystyrene‐graft‐maleic anhydride layer via ion‐beam irradiation for liquid crystals	63
Development of efficient energy absorption components for crashworthiness applications: An experimental study	59
Engineering hydrophobic surface on polyethersulfone membrane with bio‐inspired coating for desalination with direct contact membrane distillation	58
Novel bionanocomposites of chitosan‐based blend containing LaB6: Thermal, dielectric, and biological properties	57
Flame retardant and mechanical properties of core‐shell‐like polybutylene terephthalate/intumescent flame retardant through controlling injection time	55
A novel high phosphorus‐efficiency phosphaphenanthrene curing agent for fabricating flame retardant and toughened epoxy thermoset	50
Aminolysis of polyesters for cracking and structure clarifying: A review	47
Evaluation of transport mechanism and nanostructure of nonperfluorinated PVA/sPTA proton exchange membrane for fuel cell application	47
State‐of‐the‐art review on the high‐performance poly (ether ether ketone) composites for mechanical, tribological and bioactive characteristics	46
Preparation and Characterization of Amphoteric Polysaccharides Derived From Chitosan and Gellan Gum	43
Artificial Liposomes With Internal Docking Site for Protein Delivery	42
Sandwich‐Architected MXene@TiOx/PVA Composite Films With Augmented Dielectric Performance and Energy Storage Capability	41
Novel Nanophotosensitizers Employing Poly(Acrylamide‐Co‐N‐Isopropylacrylamide) Nanoparticles for Antimicrobial Photodynamic Therapy	41
Construction of Dual‐Functional Emulsion Micelle Interface With Ionic and Reactive Groups	41
Evaluating the Effect of Chitosan Addition on the Color Properties of Conventional Glass Ionomer Cements	40
Bioactive Hydrogels (Bio‐HyGs): Emerging Trends in Drug Delivery and Wound Healing Applications	38
Engineering of a 3D Printed Bilayer Artificial Skin Bio‐Mimicking Epidermis and Dermis for Skin Tissue Engineering Applications	37

Mechanical properties of modified aramid three‐dimensional braided composites	36
Promotion on the thermal and mechanical behaviors of epoxy resin using phthalonitrile and functionalized‐SiO2	36
Novel sulfonated calixarenes derived crosslinker for reinforcing and toughening collagen: Relevance between structure and properties	35
Design of interconnected graphene loaded thermoplastic elastomeric blend composite films for minimizing electromagnetic radiation and efficient heat management	34
Cashew tree gum exudate as a biopolymer electrolyte: The influence of glycerol plasticization	33
The Key to Increasing the Elongation of Poly (l‐Lactic Acid) Monofilaments in Hydrothermal Environment‐Dislocation Slip	32
Enabling Design of Strong and Tough Poly(Propylene Carbonate) Through In Situ Generated Poly(Propylene Carbonate)‐Based Cross‐Linked Microdomains	32
Preparation of flame retardant and thermal insulation polystyrene foams via high internal phase emulsion template	31
Investigation on mechanical, gas barrier, and biodegradation properties of graphene oxide reinforced bovine trimmings derived collagen biocomposite	31
A study on theoretical predictive model and experimental findings of melt‐electrospinning process	31
A double‐dynamic‐bond crosslinked multifunctional conductive hydrogel with self‐adhesive, remoldability, and rapid self‐healing properties for wearable sensing	31
A strategy towards simultaneously improving strength and processability of polyamide 6 using bespoke dynamic covalent chain extender	31
	30
In situ photo‐crosslinked hydrogels prepared from acrylated 4‐arm‐poly(ethylene glycol)‐poly(ε‐caprolactone) block copolymers for local cancer therapy	29
Issue Information	29
Improvement of environmental stress cracking performance, load‐carrying capacity, and UV light barrier property of polyethylene terephthalate packaging material	29
Essential oils as natural root‐repellent herbicides for drip irrigation systems	29
Novel fluorescent nanoprobe based on hyaluronic acid and polyethyleneimine functionalized graphene oxide for detecting hyaluronidase as tumor marker	29
The thermal energy storage capacity and fire risk of phase change material based on the framework of modified melamine sponge	28
Guanidinopropyl end‐modified poly(ethylene glycol) to form highly compact plasmid DNA mono‐ion complexes by thermal treatment	27
Nonisothermal crystallization of poly(L‐lactic acid) promoted by polyols	27
Synthesis and characterization of a polycarboxylate superplasticizer modified by sodium hypophosphite	27
A phosphaphenanthrene‐based derivative for simultaneously improving flame retardant and smoke suppression of epoxy resin composites	27
Thermosetting epoxidized polybutadiene/low‐molecular weight polyphenylene oxide compatible system with quite low‐dielectric constant and loss prepared through co‐curing reaction	26
Flexible Piezoelectric Sensor Based on P(VDF‐TrFE)/BiCl3/GR Fabricated via High‐Voltage Electrospinning for Physiological Signal Monitoring	25
Investigation on the flame retardancy, thermal and mechanical properties of epoxy resin/cyanate ester composites based on mSiO2@ZrPB and DOPO‐HQ	25
Synthesis of low phosphorus flame retardant containing benzimidazole and hydroxyl and its application in reducing combustion smoke for epoxy resin	24
Influence of BN doped 2‐hydroxyethyl methacrylate phosphate coated expandable graphite on flame retardancy and thermal conductivity of styrene‐butadiene rubber composites	24
Amide polymers based on N‐phenyl‐p‐phenylenediamine with α‐olefins‐co‐maleic anhydride as multifunctional additives for lubricant application	23
Antimicrobial polymeric composites in consumer goods and healthcare sector: A healthier way to prevent infection	23
Fabrication, microstructure, and nonlinear/linear optical parameters of polymeric‐based poly(vinyl alcohol)/poly(vinyl pyrrolidone) nanocomposites films for optical attenuation applications	23
Poly(vinylidene fluoride) and thermoplastic polyurethane composites filled with carbon black‐polypyrrole for electromagnetic shielding applications	23
Mechanical and electrical properties of carbon nanotube/epoxy/glass‐fiber composites intended for nondestructive testing	22
Ranking Analysis of Tribological, Mechanical, and Thermal Properties of Nano Hydroxyapatite Filled Dental Restorative Composite Materials Using the R‐Method	22
The in situ synthesis of weakly entangled ultrahigh‐molecular‐weight polyethylene/polyethylene wax blends and its synergetic disentanglement effect on LLDPE reinforcem	22
A systematic investigation of solution and technological parameters for the fabrication and characterization of poly (vinyl alcohol–chitosan electrospun nanofibers	22
Sustainable Bioplastics Production From Fish Waste: Their Extraction and Applications	21
Heat‐resistant and transparent polyimides derived from alicyclic dianhydrides and phthalazinone‐based diamine	21
Keratin Gel From Chicken Feathers Waste Obtained by Mercaptoethanol Extraction	21
Evaluation of Wear and Hardness Properties of 3D‐Printed Polylactide/Hydroxyapatite/Titania Composites	21
Manipulating a novel epoxy‐based composite with core–shell rubber particles for designing a structural adhesive in aluminum–aluminum bonded joints	21
Machine Learning‐Based Design and Fabrication of Multilayered Microwave Absorber	20
Effects of Green Silica on Nitrile Butadiene Rubber Composite on Its Enhanced Mechanical Characteristics	20
Synthesis and Investigation of the Properties of Castor Oil‐Based Waterborne Polyurethane/Nanochitosan Nanocomposites With Antibacterial Properties	20
Biomedical applications of microfluidic devices: Achievements and challenges	19
Impact of Low Molecular Weight, Biodegradable, Atactic Amorphous Poly(R, S‐Hydroxybutyrate) on Eco‐Friendly Poly(Lactic Acid)	19
Reversible polymer networks based on polylactide with tetraphenylethane thermally dissociating groups in crosslinks	19
Preparation of PES/MMT Composites via In Situ Polymerization: Synergistic Improvement of Polymerization Rate and Crystallization Performance	19
Electrospun nanofibers for drug delivery applications: Methods and mechanism	19
Decontamination of methylene blue from aqueous media using alginate‐bonded polyacrylamide/carbon black nanocomposite hydrogel	19

Advancing Cardiac Tissue Engineering With Smart Biopolymers: From Fabrication Strategies to 4D Printing and Organoids	18
Calculation of the macroscopic mechanical properties of polyamide 6.6 underwater influence using molecular dynamics simulations, hyperelastic material modeling of the amorphous fraction, and homogeniz	18
A new way to investigate the damping properties of NR/CIIR blends characterized by the rebound behaviors	18
Enhancing endothelial differentiation of human mesenchymal stem cells by culture on a nanofibrous polycaprolactone/(poly‐glycerol sebacate)/gelatin scaffold	18
The lamellar MOFs@polymer networks hybrids fabricated in reversed microemulsion for efficient CO2 capture	18
Preparation and properties of aniline chain‐extended thermoplastic epoxy resin using triphenylphosphine as catalyst	18
Electrospinning of spider silk‐based nanofibers	18
Effects of types and concentrations of modified Cloisite Clays on properties of chitosan nanocomposites for food packaging	18
Polyurethane‐based nanocomposite for catalytic reduction of toxic dyes	17
Design and preparation of a novel organic–inorganic hybrid for reducing fire hazards of epoxy	17
Eco‐friendly three‐dimensional hydrogels for sustainable agricultural applications: Current and future scenarios	17
Synthesis and characterization of fluorine functionalized graphene oxide dispersed quinoline‐based polyimide composites having low‐k and UV shielding properties	17
Engineering antibacterial shrinkage‐free trinary PLGA‐based  GBR membrane for bone regeneration	17
Synthesis of Aluminum Oxide (Al2O3) Nanoparticles Decorated With Polymeric Carbon (Al2O3/AC) Nanocomposites for High Specific Capacitance Value	17
Hierarchically structured polyvinylidene fluoride core‐shell composite yarn based on electrospinning coating method to improve piezoelectricity	17
Preface	17
Facile fabrication of polypyrrole/NiOx core‐shell nanocomposites for hydrogen production from wastewater	17
The role of poly(3‐hydroxybutyrate)‐based derivatives in skin, nerve, cartilage, and bone tissue engineering applications—An updated review	17
Evaluation of the SEBS copolymer in the compatibility of PP/ABS blends through mechanical, thermal, thermomechanical properties, and morphology	17
Issue Information	17
Smart shape memory polymers and their significance in biomedical applications: A review	17
Organo‐sulfonic acid catalyzed degradation kinetics and thermodynamic studies of nylon‐6 by hydrothermal method	17
Permanent antimicrobial polymethyl methacrylate prepared by chemical bonding with poly(hexamethylene guanidine hydrochloride)	17
Using Recycled Polypropylene Waste to Fabricate Membranes for Water Treatment Applications	16
Impedance Spectroscopy and Antimicrobial Activity in ZnO–Cellulose/Chitosan@Cu2+ Wavy‐Like Nanocomposites Formed via Semi‐Dissolved Chitosan Templating	16
Mechanical Behavior Prediction of 3D‐Printed PLA/Wood Composites Using Artificial Neural Network and Fuzzy Logic	16
Poly(Vinylidene Fluoride‐Hexafluoropropylene) Composites With Carbon Based Nanofillers for Electromagnetic Interference Shielding	16
Recent Advances in Smart Polymeric Micelles for Targeted Drug Delivery	16
Study of Gelatin Copolymer Hydrogel Based Polyaniline and Correlation Between Structure and Reactivity of Substituted Polyaniline Based Gelatin Solution as Gamma Radiation Dosimeters	16
Innovative Antibacterial Magneto‐Conductive Multifunctional Hydrogel From Biocompatible Materials	16
Multifunctional Hydrogels for Biomedical Applications, By Ricardo A.Pires, IvaPashkuleva, and Rui L.Reis, Wiley‐VCH GmbH, 2022. 384 pp. €149.00 (hardback). ISBN: 9783527347162. Scope: Handbook, Refere	16
3D Printing of Aluminum Alloys via Material Extrusion (MEX) Process: Challenges in Developing Acetone‐Soluble Binder Systems	16
Aerva lanata flower extract mediated green synthesis of silver nanoparticles: Their characterization, in vitro antioxidants and antimicrobial investigations	16
Functionalizing MXene with PEPA‐containing polyphosphazene towards highly fire‐safe polypropylene	15
Nanocomposite interface coupled with thickness optimization promoting water dissociation in heterogeneous bipolar membrane	15
Preparation and UV‐curing properties of rosin‐based allyl phthalate oligomer	15
Self‐assembly and antistatic property of ionic liquid crystalline polymers	15
Tunable self‐assembled stereocomplexed‐polylactic acid nanoparticles as a drug carrier	15
Preparation and properties of antibacterial styrene‐acrylic emulsion based on bis‐quaternary ammonium salt‐containing mono‐methacrylates as polymerizable antibacterial agents	15
Carbonization‐dominated synergistic behaviors of ammonium hypophosphite/EG composite in improving flame retardancy of flexible polyurethane foam	15
Surface modification of polycarbonate urethane by grafting polyethylene glycol and bivalirudin drug for improving hemocompatibility	15
Nanoparticles positioning effect on properties of (PS‐PANI/NiNPs) nanocomposite films	15
The numerical simulation of the mechanical failure behavior of shear thickening fluid/fiber composites: A review	15
Curing and morphology approaches of polyurethane/poly(ethylene glycol) foam upon poly(lactic acid) addition	15
Advances in the use of electrospinning as a promising technique for obtaining nanofibers to guide epithelial wound healing in diabetics—Mini‐review	15
A theoretical model for two‐way bending behavior of bilayer shape memory polymer plate	14
Comparative Structural and Mechanical Characterization of FDM 3D‐Printed PLA Scaffolds for Bone Tissue Engineering Applications	14
Amphiphilic pluronic F68 biomaterial augmented oral bioavailability and anticancer activity of genistein in lung cancer treatment	14
Formate dehydrogenase mimic nanoenzyme embedded cryogel for CO2 conversion	14
Solid polymer nanocomposite electrolytes based on poly(ε‐caprolactone)‐based waterborne polyurethane–polyethylene oxide and fluorine‐doped carbon quantum dot‐MXene	14
Synergistic effect of expandable graphite and aluminum hypophosphite in flame‐retardant ethylene vinyl acetate composites	14
The introduction of the disconnection approach into polymer synthesis	14
Issue Information	14
High‐performance shape memory characteristics by integrating urea linkages into the polyurethane elastomer	14
Dual‐responsive polycarbonate micelles for activating intracellular drug release	14
Study on improving the toughness of rapidly curing epoxy resin composite materials with a biobased microcrystalline cellulose	14
Strain controlled shear hardening behavior in suspensions of alumina spheres in a polydimethylsiloxane oligomer matrix	14
Thermosensitive acetylated carboxymethyl chitosan gel depot systems sustained release caffeic acid phenethyl ester for periodontitis treatment	14
Isolation, screening, and characterization of polyhydroxyalkanoate (PHA)‐producing Cellulosimicrobium cellulans: A promising approach for eco‐friendly biopolymer production	14
Tailoring Cotton Textile Properties With Hybrid, Janus, and Core–Shell Electrospun Waterborne Polyurethane/Polyethyleneimine Nanofibers: Investigating Hyaluronic Acid Functionalization for Enhanced Bi	14
Ag/ZIF‐8/polyacrylonitrile flexible SERS substrate with high sensitivity for the surface corrosion analysis	14
Optimizing Al/SiC Nanocomposite Microstructures: An Efficient Hybrid LWO‐EPTANN Approach	14
Enhancing Electrical and Magnetic Properties in SLA 3D Printed Resin Composites With Nano MWCNT, TiN, and c‐BN Powders	13
Hydrogel Based on Starch and Poly(Ethylene Terephthalate) Recycling Products for the Slow Release of Urea	13
Preface of PAT special issue for the PAT‐ICRS joint meeting	13
Fabrication of biodegradable hydrogels based on chitosan and poly(azomethine‐urethane) containing phenyl triazine for drug delivery	13
Effects of Surface‐Treated Nanomagnesia on the Electro‐Mechanical Properties of Polypropylene/Ethylene‐Propylene‐Diene Monomer Blends	13
Electrically Conductive Lignin Reinforced Polyacrylic Acid/Hyaluronic Acid Scaffolds With PEDOT:HA Nanoparticles	13
Dual driven mechanism (hygro‐redox) semi‐interpenetrating polymer network composite film (polyaniline‐polyacrylic acid/sulfonated poly (ether ether ketone)) for artifi	13
Issue Information	13
A liquid phosphorous flame retardant combined with expandable graphite or melamine in flexible polyurethane foam	13
Modified Wollastonite Fibers Improve the Mechanical Properties and Sintering Properties of Polyethylene Composites	13
Evaluating the Antibacterial and Anti‐Biofilm Properties of Chitosan Nanoemulsion Containing Euphorbia hebecarpa Plant Extract Against Escherichia coli and Staphylococcus aureus	13
Effect of carbon nanotubes on curing characteristics of low energy electron beam curing CFRPs	13
	13
Polydopamine by APP Template With SiC and Silane Hybrid Coating One‐Step Co‐Deposited UHMWPE Fibers and Corona Reinforced Epoxy Composites	13
Comparisons of enhanced thermal neutron‐ and gamma‐shielding properties in UHMWPE composites containing surface‐treated Sm2O3 and Gd2	12
Synergism of triazine containing dopamine to flame retardancy, smoke suppression, and mechanical properties of thermoplastic polyurethane/ammonium polyphosphate	12
Dragline silk fibers from golden orb‐web spider Trichonephila clavata ensure structural and mechanical robustness against ultraviolet radiation	12
Thermal stability and decomposition kinetics of polybenzoxazine and oligomeric polyhedral octaphenyl silsesquioxane nanocomposites	12

Microstructural, mechanical, thermo‐rheological, barrier, and antimicrobial properties of coextruded tri‐layer polylactide/encapsulated geraniol/polylactide‐graphene nanoplatelets films	12
Conjugation of Anticancer Drug in Polymeric Nanosystem of Poly(Ethylene Glycol) Methyl Ether Methacrylate Brushes@Polydopamine for Controlled Drug Release	12
Robust Dual Crosslinking Ionic Network for High‐Performance Cis‐1, 4‐Polyisoprene Latex/Sodium Alginate Composites	12
Engineering of a Bilayer Film Made From Decellularized Amniotic Membrane and Emulsion for Skin Tissue Engineering Applications	12
UV‐initiated preparation and absorption properties of pseudo‐polyrotaxane cyclodextrin‐based PVA/poly (acrylamide‐co‐acrylic acid) hydrogel	12
Fabrication of piezoelectric poly(l‐lactic acid) nanofiber membranes with controllable properties	12
Investigation on the Low‐Frequency Acoustic Performance of Polymer Matrix Composite With Metallic Hollow Spheres Under Different Acoustic Stack Structures	12
Effect of Ionic‐Electronic Coupling on the Percolation Phenomenon of Polymer/Reduced Graphene Oxide Nanocomposite Films	12
Highly Efficient Hydrogel Oil–Water Separation Membranes Prepared by Superhydrophilic Graphene Oxide Brushes	12
A comparison of physical, morphological, and mechanical properties of bio‐polyester hybrid nanocomposites	12
The effect of fiber orientation and stacking sequence on carbon/E‐glass/epoxy intraply hybrid composites under dynamic loading conditions	12
Preparation and characterization of colorless and transparent semi‐alicyclic fluoro‐containing polyimide nanocomposite films with enhanced high‐temperature dimensional stability via incorporation of c	12
Mini Review: Challenges and Promising Advances in Hydrogel‐Based Scaffolds for Breast Tissue Regeneration	12
Ring‐opening (co)polymerization strategies of selected oxacyclic monomers to control and provide tailored polymers with desired properties	12
Advancing Mechanical Properties of Polypropylene Matrix Composites: Analysis of Diverse Reinforcing Fillers	12
Synthesis, Characterization, and Cytotoxic Activity of Stable Selenium Nanoparticles‐Incorporated Carboxymethylcellulose Solution	12
Ballistic performance of novel design of bulletproof plates inspired by biomimetic approaches	11
Chirality of proteinoid nanoparticles made of lysine and phenylalanine	11
	11
Structure and mechanical properties of natural rubber vulcanized with various zinc oxide nanoparticles	11
Green biobased P‐N coating: Towards waste‐minimization flame retardant flexible polyurethane foam	11
Efficient removal of dyes by light‐responsive graphene oxide‐blended polyethersulfone nanofiltration membranes	11
Swelling poly(ionic liquid)s for demulsifying oil‐in‐water emulsion by anion exchange	11
Alginate functionalized MFe2O4 (MNi, Co) nanoparticles and hydrated salt incorporated flexible PVDF ternary nanocomposite fibers for magnetoelectric applications	11
Preparation of polystyrene@Ni@Cu core–shell microspheres by pickering emulsion polymerization and their autonomous motion in a magnetic field applied to anisotropic conductive films	11
Preparation and characterization of pesticide Fosthiazate‐loaded microcapsules for controlled release system	11
Comparison of electrochemical behavior of composites based on graphene oxide, poly‐o‐phenylenediamine, and heteropolyacids	11
Design and characterization of a novel braided biodegradable double‐J ureteral stent	11
New trends in nanofibers functionalization and recent applications in wastewater treatment	11
Low‐temperature silane coupling agent modified biomimetic micro/nanoscale roughness hierarchical structure superhydrophobic polyethylene terephthalate filter media	11
Aggregation‐induced emission‐active poly (β‐lactam) prepared by Staudinger polymerization as specific probe to Fe3+ ions and its antimicrobial properties	11
High density interfaces enhanced microwave absorption in multifunctional carbon nanotubes‐glass fiber‐epoxy composites	11
Fabrication and investigation potential effect of lentinan and docetaxel nanofibers for synergistic treatment of breast cancer in vitro	11
Double dynamic bonds tough hydrogel with high self‐healing properties based on acylhydrazone bonds and borate bonds	11
Molecular dynamics simulation for chlorinated butyl rubber composite reinforced by dendritic amino‐terminated aromatic polyamide	11
Synthesis, curing, and degradation kinetics of polyurethanes based on poly(ethylene glycol), isosorbide, and pentamethylene diisocyanate	11
The novelty role of polyamide elastomer in the determination of crosslink density and the formation of crosslink network of EPDM vulcanizates	11
Effect of multi‐epoxy compatibilizers with branched structures on enhancing mechanical and compatibility of PLA/starch composite	11
Mathematically described model of poly(glycerol maleate) cross‐linking process using triethylenetetramine addition	11
Interpenetrating Polymer Network of Hydroxyethyl Methacrylate and Chitosan as Cryogels for Tissue Engineering Applications	11
GMP/Al2O3/ZnO/PDMS thermal interface materials with anisotropic thermal conductivity and electrical insulation ability obtained by	11
Crystal structure, morphology, and mechanical properties of biaxially oriented polyamide‐6 films toughened with poly(ether block amide)	11
3D‐printable cyclic peptide loaded microporous polymers for antimicrobial wound dressing materials	11
Development of highly alkaline stable anion conductive polymers with fluorene backbone for water electrolysis	10
Quantitative analysis of UV protective additives in polyethylene films by solvent extraction coupled with UV spectrophotometry	10
Poly(ester amide) from 6‐amino‐1‐hexanol and terephthalic acid: preparation and properties	10
Superabsorbent polymer with enhanced gel strength and heat resistance using itaconic acid‐based oligomer	10
Gas Sensing With Polymeric Materials: Improved Sensitivity and Selectivity for Acetaldehyde and Formaldehyde	10
	10
Age resistant low density peroxide cured EPDM rubber insulation for large rocket motors	10
Preparation of porous biodegradable PLLA with tunable pore size through simple variation of PEG/PLLA‐blend crystallization conditions	10
Ring‐opening (co)polymerization of cardanol glycidyl ether	10
Research progress on synthetic methods and application performances of polycarboxylic acids with different sequence structures	10
Effect of Epoxidized Natural Rubber on the Crystallization, Thermal Stability, and Rheological Behavior of Polylactide Stereocomplexes	10
Demystifying the Potential of Polymeric Lipids as Substitute in Regenerative Applications: A Review	10
Synthesis of functionalized Salen‐Ni‐based polyphosphazene flame retardant and its performance study	10
Mussel‐inspired chitosan‐based hydrogel sensor with pH‐responsive and adjustable adhesion, toughness and self‐healing capability	10
Sound insulation of a novel laminated polymer matrix composite containing metallic hollow spheres based on phononic crystal structure design	10
Morphology evolution and mechanical property enhancement of linear low‐density polyethylene by adding disentangled ultrahigh molecular weight polyethylene	10
β‐Carotene‐reinforced Poly(methyl methacrylate): A step forward in bioactive bone cements	10
Preparation and UV‐curing properties of oxazolidine‐2‐one based acrylates	10
Direct Comparison of Low Velocity Impact Performance of Nanoclay, Boric Acid and Interlayer Hybrid Composites	10
	10
Taguchi–gray relational analysis of eccentricity and tilt of multilens module mount fabricated by injection compression molding	10
Development and investigation of high‐flux antifouling NF PES membranes decorated by aniline oligomers and application for wastewater treatment	10
Polyvinyl chloride surface coated with polymer brushes using a chain‐transfer reaction for enhanced fouling resistance	10
POSS‐modified ammonium polyphosphate for improving flame retardant of epoxy resins	10
	10
Fabrication, characterization, and selection using FAHP‐TOPSIS technique of zirconia, titanium oxide, and marble dust powder filled dental restorative composite materials	10
Novel biocidal polyampholytes with guanidinium and carboxy groups	10
Synthesis of guanidinium‐dendrimer‐type pDNA carriers for gene delivery into floating blood cells	10
Influence of ionic impurities on the dielectric properties of lignin	10
pH stimuli‐responsive and fouling resistance PES membrane fabricated by using photochromic spiropyran and spironaphthoxazine nanofillers for pesticide removal	10
Zwitterionic ZnO nanoparticles: Novel additives to synthesize high performance and fouling resistance thin‐film nanocomposite forward osmosis membrane	10
Bone tissue engineering using 3‐D polycaprolactone/gelatin nanofibrous scaffold containing berberine: In vivo and in vitro study	10
Effect of hydroxyapatite and pulsed electromagnetic field on osteogenic differentiation of human stem cells seeded onto 3D‐printed polycaprolactone scaffolds for future bone graft transplan	10
	10
Development of PVA/sodium alginate incorporated with histidine capped silver nanoparticles for food packaging application	10
3D printing continuous natural fiber reinforced polymer composites: A review	10
Cationic UV‐Curing of Shape Memory Biobased Polyurethanes Sensing Low Heat	10
Zinc oxide nanoparticles reinforced gelatin/starch bio‐nanocomposite film for UV‐ray protection and antimicrobial resistance	10
Comparative analysis of the structural, optical, mechanical, and electrical properties of PMMA/PU blend‐based nanocomposites with FeVO4 nanofiller for energ	10
Enhanced Heat Resistance and Hydrolytic Properties of Poly(3‐Hydroxybutyrate‐3‐Hydroxyhexanoate)‐Based Blends Derived From Stereocomplex Polylactides	10
Development of nanofibers functionalized with Cyanex 272 for selective recovery of gold from printed circuit board	9
Tumor microenvironment‐responsive hyaluronic acid‐oxaliplatin nanoparticles enhanced tumor cell elimination	9
Issue Information	9
Hybrid GO/TiO2 nanoparticles reinforced NaAlg/PVA blend: Nanocomposites for high‐performance energy storage devices	9
A biodegradable polymer stent with high radial performance: Potential for treatment of portal vein stenosis	9
	9
Preparation of dopamine/Ag‐modified graphene oxide/polysulfone/poly(vinylidene fluoride) ultrafiltration membrane with hydrophilic and antibacterial dual function	9
3D‐printed surface‐modified aluminum nitride reinforced thermally conductive composites with enhanced thermal conductivity and mechanical strength	9
Wood consolidation through an epoxy‐acrylic gamma‐crosslinked three‐dimensional system	9
Effect of curing agents n‐octylamine and m‐xylene diamine on the mechanical and memory properties of E51 epoxy resin	9
A flame‐retardant, dendrite‐inhibiting sandwich separator prepared by electrospinning for high‐performance and safety lithium batteries	9
Solvent‐free grafting route to develop thin and flexible polymer film from lignin	9