JOM

Article	Citations
A Scholar's Scientific and Culinary Odyssey through the Land of Legendary Swordsmiths and Computer-Generated Crystals	447
TMS Member News	81
2023 TMS President Brad Boyce: Building the Future with TMS	66
2022 Peer Reviewers: We Thank You!	58
JOM Technical Topics	56
Impact Factors Increase for All TMS Journals: A Look at Key Journal Metrics from 2021	51
In Case You Missed It: Business News from the Field	49
TMS Welcomes New Members in October and December 2023	48
A Student's Guide to TMS2024	45
Experimental Study on Separation of Iron and Arsenic from Copper Sulfate Solution	45
JOM: The Magazine Talks with Andrew Sherman of Terves about Magnesium in Oil and Gas Applications	40
JOM Technical Topics	40
In the Final Analysis	39
Porous Nanogrid-Like Cu-Doped Co-Based Materials via Rapid Self-Exothermic and Chemical Dealloying as Efficient Catalysts for Oxygen Evolution	34
Furnace Tapping	33
An Image Catalogue of Micron- and Sub-micron-Sized Constrictions Fabricated with the Femtosecond Laser and Created with the AFM	32
TMS Meeting Headlines	31
Effects of Process Parameters on the Accuracy of Directed Energy Deposition-Arc Lattice Structures	30
Mechanical and Electrical Properties of 3Y-TZP/CrSi2 Ceramics Fabricated by Pressureless Sintering	30
Effect of Loading Rate on Monocrystalline Germanium Nanoindentation Behavior Based on Molecular Dynamics	30
High-Temperature Rheometric and Melting Experiments of Refining-Type Ladle Slag Systems	30
Kinetic and Mechanism of Ca Leaching in the Production of High-Purity Magnesia	29
Effect of Sc on the Oxidation Behavior of Al-2Li Alloys in the Molten State	29
Oxidation Behavior of Iron During Atmospheric Oxygen-Enriched Leaching of Zinc Oxide Dust	28
Effect of Deformation Heat Treatment Process on the Grain Boundary Character Distribution of N06625 Alloy	27

Hydride–Dehydride Processes and Behaviors for Ductile Refractory Complex Concentrated Alloys	26
Understanding the Role of Cladding Material and Substrate Properties on Heat Transfer in the Horizontal Single-Belt Casting (HSBC) Process for Bimetallic Clad Strips: A Finite Volume Approach	25
Preview TMS Events at MS&T25	24
An Environmentally Friendly Method for Producing α-Fe2O3 Pigment from Low-Grade Hematite Residue	24
Sharing Ideas Across Disciplines at TMS Specialty Congress 2025	24
Exploring the Influence of Composition and Microstructure on High-Strain-Rate Properties in Fe-Cu Alloys Made by Laser Powder Bed Fusion	24
In the Final Analysis	24
Surface Improvement of Ti-6Al-4V Alloy by Deposition of AlCrCoFeMnNi High Entropy Alloy Using TIG Process	23
Innovative Stent Test Specimen by Additive Manufacturing for Reliable Mechanical Testing and Simulation	23
Prediction of Melt Pool Geometry and Defects in Laser Additive Manufacturing of Inconel 718 Alloy: A Machine and Deep Learning Approach	23
Transient Multi-physical Field Coupling Simulation of Fe-0.2C-6Cu wt.% Alloy Melt Under Different Electromagnetic Fields	23
Evaluation of Analytical Methods Applicable for the Classification of Sulfur-Containing EP Additives and Their Raw Materials	22
Enhanced Copper Leaching from Chalcopyrite Via Co-milling Activation in a Sulfuric Acid System with Chloride-Rich Wastewater	22
Numerical Simulation and Experimental Study of Laser Rust Removal and Composite Strengthening of 42CrMo Steel	22
Zinc Ferrite Conversion Kinetics and Mechanism During Roasting with Calcium Oxide	22
Crystallographic Texture Evolution in Additively Manufactured Inconel 625 After Ultrasonic Nanocrystal Surface Modification	21
Advances in Biomaterials and Materials for Biomedical Applications	21
Effect of ZrO2 on Melting and Crystallization Properties of CaF2-CaO-Al2O3-MgO-TiO2 Electroslag	21
TMS Meeting Headlines	21
Grain Rotation and Crack Propagation in Bulge-Tested Gold Films with 4D-STEM	21
Thermal Analysis of Continuous Casting Tundish Using a Conjugate Heat Transfer Model	21
Microstructure and Mechanical Properties of AlCoCrFeNi High-Entropy Alloy-Reinforced Ti-Al Metallic-Intermetallic Composites	20
Acid Leaching for Phosphorus Separation from the Co-processing of Dephosphorization Slag and Basic Oxygen Furnace Slag: Kinetics Investigation	20
Process Optimization and Performance Investigation of AlCoCrFeNi High-Entropy Alloy Coatings Fabricated by Laser Cladding	20
Recovery of Valuable Metals from Spent Al2O3-Based Catalysts by Sodium Carbonate Roasting and Water Leaching	20
Microstructure and Mechanical Properties of Nanocrystalline CoCrCuFeNi High-Entropy Alloy Coating Manufactured by Atmospheric Plasma Spraying	20
Volume Fraction Effect on the Mechanical and Shape Memory Properties of NiTi Gyroid Lattice Structure Fabricated by Laser Powder Bed Fusion	20
Microstructural Evolution and Mechanical Behavior of Diamond-Reinforced Fe-Cu Composites	19
Dry Sliding Wear Characteristics in Trend at Every Stage of Al-TiO2 Nanocomposite Manufacturing Processed by Atmospheric Plasma Spraying and Accumulative Roll Bonding	19
Exploring a Sustainable Approach to Antioxidant Potential of Iron Oxide Nanoparticles Synthesized Using Citrus sinensis Peel Extract	19
Novel Collector 4-Butoxy-Benzohydroxamic Acid: Utilization and Selective Adsorption Characteristics in Bastnaesite Flotation	19
Friction and Wear Behavior of Laser-Cladded TiAl Coating on TC4 Substrate from Room Temperature to 800°C	19
Fe-Doped Mn3O4 Spinel Nanostructures for Enhanced Alkaline Oxygen Evolution Reaction via Electrodeposition	18
Synergistic Enhancement of Mechanical and Erosion Performance in HVOF-Sprayed WC-10Co-4Cr Coatings via TiB2-B4C Hybrid Reinforcement and Laser Remelting	18
Laser Selective Melting of Ti6Al4V/AlMgScZr Lightweight Metallic Multi-Materials: Parameter Optimization, Microscopic Characteristics, and Mechanical Properties	18
Development of a Low-Carbon Medium-Mn TRIP Steel with an Excellent Combination of Strength and Ductility	18
Performance and Durability of Reversible Solid Oxide Cells with Nano-electrocatalysts Infiltrated Electrodes	18
NaOH-assisted Carbothermic Reduction for High-Grade Ferronickel Production: A Study on Selective Reduction and Phase Transformation of Saprolite Ore	18
Investigating Early-Stage Mineralization Behavior and Bioactivity of Acid-Free Bioactive Glass 45S5 with Enhanced Dissolution Kinetics	17
The Effect of the Percentage of Mg on the Properties of Cu-Mg Alloys Manufactured by Horizontal Continuous Casting Process	17
Solid-to-Solid Diffusion Bond Between SA508 Low Alloy Steel to 316L Stainless Steel by Hot Isostatic Pressing	17
Synergistic Effects of Pre-charged Hydrogen and Tensile Stress on the Stress Corrosion Cracking of 2024-T351 Aluminum Alloy	17
Molecular Dynamics Simulation of Cu/Ti Heterogeneous Interface Evolution and the Elemental Diffusion Behavior	17
Efficient Zinc Removal from Blast Furnace Sludge Using Choline Chloride–Malonic Acid: Towards Sustainable Recycling of Iron Extraction Waste	17
Suppressing Ordering in Equiatomic Fe-Co via Laser Powder Bed Fusion	17
Model Experiment for the Investigation of Thermoelectric Magnetohydrodynamics in Metal Additive Manufacturing	17
A Novel Method for the Recovery of Li from Spent Lithium-Ion Batteries Using Reduction Roasting–Countercurrent Leaching	17
Exploring Mechanical and Phase-Microstructure Characteristics of Geopolymer Mortars Incorporating Chromite Ore Waste	16
Diffusion Interface Evolution of Low-Alloy Steel Q235 and Ti by Electro-Assisted Hot-Pressing Bond	16
Investigation on Microstructure, Mechanical Properties, and Fracture Morphology of Al7075/TiB2 Composites	16

Activation Behavior and Mechanism of Sodium Sulfate for Iron Recovery from Red Mud through Magnetization Roasting–Magnetic Separation	16
Research Progress and Development Trend of Amorphous and Nanocrystalline Composite Coatings: A Review	16
A Finite Element Study on the Modeling, Simulation, and Optimization of Thermo-Mechanical Particle Collision and Bonding Under Thermal Loading in Electrode Fabrication	16
Simulation Study to Check the Impact of ZrS2 and In2S3 Buffers on CZTSe Solar Cell Performance	16
Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion	16
Iron Recovery and Valorization of EAF Slag by Online Smelting Reduction via Al2O3 Modification	16
Thermodynamic and Experimental Optimization of Fe Extracting-Oriented Slag Composition for Oxygen-Enriched Top-Blown Nickel Smelting	16
Study on the Influence of CMT Welding Parameters on the Microstructure and Friction-Wear Properties of Babbitt Alloy	16
Thermal Expansion and Microstructure of Laser Additively Manufactured Inconel 617 for Small Modular Reactors	16
Past, Present, and Future of Fe-Mg Bioresorbable Alloys for Medical Applications	15
Numerical Simulation and Sensitivity Evaluation of Process Parameters for AC-HVOF Spraying 3D Model	15
Microstructural Investigation of Sn-Based Solder Reactions with FeCoNiCrMn High-Entropy Alloy at Various Temperatures	15
A CFD Analysis of Oxygen Lance Configuration to Mitigate Dead Zones and Improve Steel Production in Electric Arc Furnaces	15
Preparation of Novel (Hf0.2Nb0.2Ta0.2Ti0.2W0.2) B2 High-Entropy Boride Ceramics	15
Design and Characterization of Solidified-Soil–Coal-Gangue Composites: Pore Structure Control and Enhanced Thermal Stability for Reclamation Applications	15
Atomic-Scale Modeling of Mechanical Properties and Corrosion Behavior in Mg-Pr Alloys Using a Deep Potential Approach	15
Deformation Behavior and Constitutive Model Modification with Friction Correction of TC4 Titanium Alloy During Hot Compression	15
Effect of Membrane Pore Size on Copper Recycling from Waste Printed Circuit Boards by Slurry Electrolysis	15
Prediction of Blast Furnace Gas Utilization Rate Using a Temporal Pattern Attention Mechanism-Enhanced Gated Recurrent Unit Network	15
Comparative Analysis of Impedance Matching Techniques in Wireless Power Transfer Efficiency: A Focus on Resonant, Adaptive, and Hybrid Approaches	15
Effect of Innovative Mixed Collectors on the Improvement of Flotation Recovery of Lepidolite-Spodumene Ore	15
JOM Machine Learning Showcase Topic: Submit Your Manuscript by May 1, 2023	14
JOM Technical Topics	14
Investigation of n-ZnO/p-GaAs Heterojunction Solar Cell Using Two-Dimensional Numerical Simulation	14
Study of the Friction and Wear Behavior of Ti-6Al-4V Alloy Under Low Temperatures	14
Effect of Cooling Rate on the Microstructure and Mechanical Properties of Al-5Cu-0.38Mg-0.32Mn-0.1Ag Alloy Cylinder Heads	14
TMS Welcomes New Members in May and August 2024	14
Surfactant-Enhanced Leaching of Gallium from Red Mud Waste: Toward a Sustainable and Economically Viable Extraction Process	14
Highly Selective and Green Recovery of Lithium from Coal Gangue Using Recyclable Ammonium Fluoride Leaching System	14
Collaboration and Connections: A Preview of ICME 2023	14
Explorations of Energy Generation in a Two-Magnets Coil System Under a Large Spacer	14
TMS Welcomes New Members in October 2024	14
Synthesis of Metallic Nanoparticles from the Recovery of Secondary Sources: An Opportunity within the Circular Economy Process	14
Advances in Sintering of Titanium Aluminide: A Review	14
Donors Build on TMS Foundation Success in 2024	14
The Effect of Palygorskite on the Properties of Copper–Nickel Smelting Slag-Based Cementitious Materials	14
Scale-Invariant Geometries Arising from the Interaction Between a 9%Cr Steel and Molten Nitrate Salt	13
Corrosion and Tribological Behaviour of GO-Reinforced Aluminium Alloy 5052 Fabricated by Accumulative Roll Bonding	13
An Investigation of Energy Dissipation in Beta III Titanium Alloy	13
Processing an 18Cr-8Ni Austenitic Stainless Steel Without the Dilemma of the Strength and Ductility Trade-Off	13
Influence of Solutal Marangoni Effect on Droplet Behavior in Metal-Slag Emulsion System: A Numerical Study	13
Study on the Preparation of Reinforced Copper-Clad Steel Wires by Continuous Cladding and Rapid Solidification	13
Residual Stresses in CuSn10 Structures: A Macroscopic Investigation of Scan Strategies and Heat Treatments	13
Study on the Effect of Thermal Activation on Arsenic Removal from Industrial Wastewater	13
Effect of WC Powder Addition on Microstructure and Wear Resistance of Laser Cladded 35CrMnSi Cladding Layers	13
A Novel Magnetization-Modified Attapulgite as an Excellent Adsorbent for Tetracycline in Water	13
JOM: The Magazine Talks with Slade Gardner of Big Metal Additive	13
Numerical Study of the Thermodynamic Behavior and Wear on the Surface of Hot-Rolling Descaling Roll	13
Resolving the Subsurface Residual Stress Maximum in Laser Powder Bed-Fused 316L Stainless Steel by Diffraction-Based Analysis	13
Microstructure and Properties of Dissimilar Butt Joints of Aluminum to Copper by Cold Metal Transfer with Preheating	13
Thermodynamic Analysis of the Synergistic Smelting Process of Complex Antimony-Gold Concentrate and Lead Concentrate	13
In Situ, Parallel Monitoring of Relative Temperature, Material Emission, and Laser Reflection in Powder-Blown Directed Energy Deposition	13
Morphological Characterization of a Modified QC-Forming Al Alloy During Tensile Testing	12
Multi-scale Microstructural Characterization and Precipitation Mechanism of Hydrides in Zr-2.5Nb Alloy Pressure Tube	12
Efficient Enrichment of Copper and Rhenium from Copper Smelting Waste Acid Utilizing Sodium Thiosulfate	12
Novel Synthesis of CuW Composite Containing Micro- and Nano-tungsten Particles Coated with SixWy Phase via Silicothermic Coupling with Aluminothermic Reduction	12
Revolutionizing Copper Nano-Networks: From Environmental Contaminants to Catalysts for Petroleum Systems, Agriculture, and Clean Energy Transition	12
Effect of Mn on the Microstructures and Magnetic Properties of Medium-Grade Non-oriented Silicon Steel Without the Normalizing Process	12
Preparation and Microwave Absorption Properties of Annular Fe3O4/rGO@PANI	12
Molecular-Scale Study of the Relationship Between Curing Agent Molecular Structure and Resin Thermo-Mechanical Properties	12
Simultaneous Extraction of Fe, Al, Sc and Cr from Red Mud by Ammonium Sulfate Calcination in the Range 250–400°C	12
Looking to the Future of TMS: An Interview with Incoming Executive Director Trudi Dunlap	12
Study on the Microstructure, Mechanical Properties and Electrical Properties of Copper-Coated Carbon-Reinforced Aluminum Matrix Composites Prepared by Powder Metallurgy Method	12
Study of Magnetic PLA/NdBFe Composites Manufactured Through FDM 3D Printing	12
Performance Simulation Methods for Shape Memory Alloy Hybrid Composites: A Review	12
Behavior and Kinetics of Pressurized Methylsulfonic Acid Leaching of Copper from Complex Chalcopyrite Calcine	12
TMS Member News	12
Identification of Potential TRIP Alloys by CALPHAD Methods, an Accessible Approach	12
Effect of Duplex Post-processing Treatment on the Surface Texture Characteristics of AlSi10Mg Alloy Processed by Laser Powder Bed Fusion Technique	12
Effect of Hot Extrusion and Annealing Treatment on Microstructure and Mechanical Properties of In Situ Mg2Si and TiB2 Hybrid Particulates Reinforced Magnesium Matrix Composites	12
Investigation of Bi Content Effects on Sn-0.7Cu Microstructure and Properties Under Different Processing Conditions	12
A Containerized Open Arc Smelter Using Hydrogen as the Reductant: A Design and Modelling Approach	12
Effect of Anisotropy on Fatigue Crack Initiation Behaviors in AA2024-T6 Aluminum Alloys	12
Investigation of the Effects of Stress Triaxiality and Porosity on Failure Behavior of Binder Jetted 316 Stainless Steel Infiltrated with Bronze	12
A Place to Call Home: Introducing Viola L. Acoff, 2026 TMS President	12
A Novel High-Efficiency, Short-Flow Process of Direct Zinc Smelting Using Oxidative Smelting and Subsequent Electrothermal Reduction	12
Friction Stir Powder Additive Manufacturing of Multi-track Depositions of Al 6061 Alloy for Cladding and 3D Printing Applications	12
Effect of Ag and Al Additions on the Strength and Plasticity of As-Cast Cu-7Fe Alloy Based on First-Principles Calculations	11
TMS Member News	11
Enhanced Carbonation of Free CaO in Basic Oxygen Furnace Slag Under High Temperature and Moderate Pressure and Its Kinetics	11

Effect of Precipitates on Dynamic Recrystallization and Texture of Mg-Sn Alloy Under Different Strain Rates	11
Microstructural and Mechanical Properties of AlCoCrFeNi2.1 Alloy Welded Joint by Vacuum EBW	11
CVD-Grown Orthorhombic SnSe Nanorods for Enhanced Charge Storage in Coin Cell Supercapacitors	11
Analysis of the Release Characteristics of Blast Furnace Lead Smelting Slag by Integrating Mineralogy and Dynamic/Static Leaching	11
Design of a Ti-Zr-P-Si Chromium-Free Passivation Composite Film with High Corrosion Resistance and Eco-Friendliness on Tinplate	11
Effect of Heat Treatment on the Microstructure and Properties of Ni51.3Ti Shape Memory Alloy by Wire Arc Additive Manufacturing	11
Effect of Multidirectional Forging on the Microstructure Evolution and Mechanical Properties of Mg-2Sn-2Zn-0.7Mn-0.5Ca Alloys	11
Combined Application of Mechanical Deformation and Nitriding to Realize Optimal Mechanical and Anticorrosion Properties for 316 Stainless Steel	11
Electrolytic Oxygen Extraction and Metal Production from NEU-2 Lunar Regolith Simulant in Cryolite-Based Molten Salt Using Fe-Ni Inert Anode	11
Influence of Magnesium Pellet Process Parameter Optimization on Pellet Mineral Phase and Performance	11
Effect of Al on the Properties and Structure of 7CrSiMnMoV Die Steel	11
Study of High-Performance Solid Oxide Electrolytic Cell Based on BaZr0.8Y0.2−xSmxO3−δ Proton Conductor Electrolyte	11
Correction: Selective Adsorption Mechanism of Zinc Ions on the Surfaces of Galena and Sphalerite in the Flotation Separation of Pb-Zn	11
Optimization of Multi-objective Process Parameters of Coal Gangue Based on Energy Consumption Theory	11
Chloro-deoxidation Behavior of Titanium Powder with SnCl2 Addition	11
Effect of Basicity on the Melting Separation Process of Reduced Hongge Vanadium Titanomagnetite Pellets	11
Pulsed Laser Additive Manufacturing for 316L Stainless Steel: A New Approach to Control Subgrain Cellular Structure	11
Prospects of Natural Fiber-Reinforced Polymer Composites for Additive Manufacturing Applications: A Review	11
Coupled Effects of Magnetic Damping and Pulling Speed on Defect Formation in 3D Czochralski Silicon Growth	11
Hydrometallurgical Technologies of Limonitic Nickel Laterite Ore for Carbon-Neutral Metallurgy: A Review	11
Correction to: Microstructure, Particle Size, and Magnetic Property of Fe-6.5 wt.% Si Nanocrystalline Alloys Prepared by Mechanical Alloying	11
Ultrasonic-Assisted Exfoliation Bulk-Phase of MoS2 with Chitosan/Acetic Acid Solution	11
Evaluation of Thermal Stability of ODS FeCrAl Alloy at Short-Term High Temperature	11
Announcing the 2026 TMS Division Award Recipients	11
Influence of Zirconium and Processing Modes on Microstructure and Properties of Mechanically Alloyed Al-10%Al2O3 Composite	11
Effect of Ni on Aging Behavior of Al-Cu-Mg Alloy Cladding	11
Recovery of Cerium from Automotive Catalytic Converters	11
Parameter Optimization of Cu/Co-Mo Amorphous Coating Prepared by Composite Co-deposition on Aluminum Alloy Surface	11
Application of Steel Slag in Road Semi-Rigid Subgrade and its Volume Stability Modification Progress Study	11
Integrity of Welding of Laser Powder Bed Fusion Haynes 282 Alloy Under Creep Conditions for Concentrated Solar Power Systems	10
Facile Synthesis of Iron-Based Materials(CS-nZVI/Cu) Derived from Copper Slag for Efficient Removal of Hexavalent Chromium	10
Irradiation Testing: Facilities, Capabilities, and Experiment Designs	10
Member News	10
Molecular Dynamics Simulation and Experimental Study of Brittle-Plastic Transition Behavior of Monocrystalline Ge at Micro- and Nano-scale	10
JOM Talks with 2022 TMS President Jud Ready	10
Nickel Extraction from Ferronickel Alloy Via Sulfuric Acid Curing-Oxidative Decomposition Roasting Followed by Water Leaching	10
TMS Members Benefit from the 2022 Emerging Leaders Alliance Conference	10
Research on the Performance of the Deep Drawing Formation Process for AZ31 Magnesium Alloy	10
Formation, Aggregation, and Composite with Oxide Mechanisms of Oxysulfide in 1215MS Free-Cutting Steel	10
Recycling of Yttrium and Europium from Microwave-Roasted Waste Cathode Ray Tube Phosphor Powder	10
Effect of Electropulsing on the Microstructure and Mechanical Properties of AZ31 Alloys Manufactured by Cold Drawing	10
Phase Equilibria of the Fe-Mn-Zn System at 600°C	10
Transport Properties of Half-Heusler LiYB Semiconductors via Ab-initio Calculations	10
Investigation and Optimization of Electrochemical Lithium Storage in Natural Stibnite	10
Magnetic Field-Assisted Laser Cladding of Cobalt-Based Alloy on 300 M Steel	10
Synergistic Mechanism of Sodium Fluorosilicate and Sodium Chlorate in the Extraction of Vanadium from Stone Coal	10
Influence of SiO2 and HA Reinforcement Particles and Extrusion Process on Mechanical and Corrosion Properties of Magnesium Radial Nano-biocomposites	10
Investigation of Chemical Species in the Corrosion Barrier Layer on Thermal CO2 Treated AZ91D Magnesium Alloy with Lithium Nitrate	10
Effect of Low Cu Content and Heat Treatment on the Microstructure and Mechanical Properties of High-Vacuum Die-Cast AlSiMgMn Alloys	10
Lightweight CrxV0.5Nb0.5ZrTi Refractory High-Entropy Alloys: Microstructure and Mechanical Properties	10
Real-Time Non-invasive Velocity Field Measurement of Molten Iron Jet Discharged from Blast Furnace	10
Improving the Sintering Properties of Manganese Ore Fines via Blending Different Manganese Ore Fines	10
Timed Thermodynamic Process Model Applied to Submerged Arc Welding Modified by Aluminium-Assisted Metal Powder Alloying	10
TMS Member News	10
Study of a Radiative Condenser Used in a Solar Water Heater in the Dry Season in a Subequatorial Country	10
Concentrating CaO from Lunar Simulant by Calciothermic Reduction Process	10
Study of the Constitutive Equations of Austenitic Stainless Steels under High Strain Rate Loading Considering Phase Transformation Effects	10
Solute Redistribution During Aging in a Laser-Based Powder Bed Fusion-Produced Fe-18Ni-9Co-5Mo-Ti Maraging Steel	10
Crafting Multifunctional Materials with Tailored Mechanical and Magnetic Properties by Solid-State Non-equilibrium Processing	10
Mechanical and Microcosmic Characterization of Layered and Microwave-Heated Cementitious Backfills: The Role of Heating, Bleeding, and Layering	10
A Novel SnBiInZn Medium-Entropy Alloy Solder with Low-Melting Point for 3D Electronic Packaging	10
One-Step Calcification–Biomaterialization Transformation Process for Treating High-Iron Bauxite Ore	10
Two-Month In Vitro Degradation of 3D-Printed Biodegradable FeMnC Alloys for Biomedical Applications	10
Investigation on Rapid Coal Drying Based on Instant Controlled Pressure Drop Method	10
Construction of High Stability Titanium Dioxide/Carbon Nanotube Anode Material Based on Titanium-Containing Blast Furnace Slag	10
Influence of Annealing Temperature on the Microstructure and Mechanical Properties of a Fe60Co10Cr10Ni10Mo5V5 Medium-Entropy Alloy	10
Cross-Disciplinary Learning and Collaboration: A Preview of the TMS Specialty Congress 2024	10
Fabrication and Performances of Piezoelectric Functional Gradient BLF-xPT Ceramic Actuators by the Tape Casting Method	10
Artificial Intelligence in Materials Education: A Roundtable Discussion	10
Extraction of Critical Metals from Secondary Source: Leaching Ti and V from Brazilian Fe-Ti-V Deposit Residue	10
In the Final Analysis	10
3D Printing Iron/Iron Oxide Composites by Metal Material Extrusion from an Industrial Waste	10
The Influence of L-PBF Process Parameters with Platform Preheating on the Structure and Properties of Orthorhombic Titanium Aluminide Ti2AlNb Alloy	10
Investigation of Demagnetization Effect on C-Shape Anisotropic Ferrite Permanent Magnet	10
A Contribution to the Validation of Microstructure Evolution and Strength Prediction Models on Two Commercial γʹ-Strengthened Ni-Base Superalloys	10
Correction: Hydrogen Desorption Kinetics Under Tensile Deformation: Experiment and Simulation	10
Preparation and Characterization of γ-Al2O3 from Coal-Bearing Kaolinite	10
Exploring the Interface Structure on Interfacial Thermal Conductivity by Constructing Sandwich-like Cu/Diamond Slice/Cu Composite	9
JOM Technical Topics	9
Study of Clustering and Precipitation Behavior in a Mg-Zn-Ca Alloy by Atom Probe Tomography	9
Highlights from OTC 2026	9
Bone Response to Biodegradable Metals and In Vitro Evaluation of the Cytocompatibility	9
Optimizing Ni/Ni-Cu Multilayer Alloy Coating via Pulsed Electrodeposition: Process Parameter Analysis and Antibacterial Performance	9
The Properties and Defect Optimization of Ni45A/TiC Composite Coatings by Laser Cladding	9
Green Synthesis of Magnesium Oxide Nanoparticles with Antioxidant Potential Using the Leaf Extract of Piper nigrum	9
Research on the Sodium Storage Performance of SnS@CNT as Anode Materials for Sodium-Ion Batteries	9
A Recent Innovation in Stir-Cast Aluminium Metal Matrix Composites to Improve Mechanical and Wear Properties with Potential Applications: A Review	9
Standardization Gaps in Powder Feedstock Characterization and Establishing Acceptability for Reuse in Additive Manufacturing	9
Technical Application of Recovery Nickel and Molybdenum from Nickel-Molybdenum Ore by Shearing-Enhanced Ammonia Leaching	9
Effect of Forging on the Microstructure and Mechanical Properties of Cast-Forging Integrated Knuckle Forming	9
Preparation of Aluminum Dross Microporous Bricks and the Pore Formation Mechanisms	9
Investigation on the Tension–Compression Asymmetry of CoCrFeNiAl High-Entropy Alloy Under the Influence of Twinning Boundary Spacing	9
Remediation of Aluminum Cast-House Wastewater Using Waste-Derived Mesoporous Alumina: Influence of Calcination Temperature	9
Reactive Synthesis in Additive Manufacturing of an Ultrahigh Temperature MoSiB Alloy	9
Effect of Ball Size and Ball Filling on the Breakage Kinetics of Fluorspar in a Ball Mill	9