JOM

Article	Citations
Meet Paul Krajewski, Children's Book Author	334
A Scholar's Scientific and Culinary Odyssey through the Land of Legendary Swordsmiths and Computer-Generated Crystals	146
TMS Member News	99
2023 TMS President Brad Boyce: Building the Future with TMS	75
2022 Peer Reviewers: We Thank You!	70
JOM Technical Topics	58
Impact Factors Increase for All TMS Journals: A Look at Key Journal Metrics from 2021	54
Model Experiment for the Investigation of Thermoelectric Magnetohydrodynamics in Metal Additive Manufacturing	52
In Case You Missed It: Business News from the Field	52
Enhanced Copper Leaching from Chalcopyrite Via Co-milling Activation in a Sulfuric Acid System with Chloride-Rich Wastewater	47
Thermodynamic and Experimental Optimization of Fe Extracting-Oriented Slag Composition for Oxygen-Enriched Top-Blown Nickel Smelting	46
TMS Welcomes New Members in October and December 2023	45
A Student's Guide to TMS2024	42
Experimental Study on Separation of Iron and Arsenic from Copper Sulfate Solution	42
JOM Technical Topics	40
JOM: The Magazine Talks with Andrew Sherman of Terves about Magnesium in Oil and Gas Applications	40
In the Final Analysis	38
Porous Nanogrid-Like Cu-Doped Co-Based Materials via Rapid Self-Exothermic and Chemical Dealloying as Efficient Catalysts for Oxygen Evolution	37
Furnace Tapping	34
An Image Catalogue of Micron- and Sub-micron-Sized Constrictions Fabricated with the Femtosecond Laser and Created with the AFM	33
Solid-to-Solid Diffusion Bond Between SA508 Low Alloy Steel to 316L Stainless Steel by Hot Isostatic Pressing	33
TMS Meeting Headlines	32
Dry Sliding Wear Characteristics in Trend at Every Stage of Al-TiO2 Nanocomposite Manufacturing Processed by Atmospheric Plasma Spraying and Accumulative Roll Bonding	31
High-Temperature Rheometric and Melting Experiments of Refining-Type Ladle Slag Systems	30
Diffusion Interface Evolution of Low-Alloy Steel Q235 and Ti by Electro-Assisted Hot-Pressing Bond	30

Aluminum Billets Heat Treatment Using Hot Flue Gas in Batch Homogenizing Preheating Furnace for Energy Efficiency and Cycle Time Reduction in Cast House	30
Mechanical and Electrical Properties of 3Y-TZP/CrSi2 Ceramics Fabricated by Pressureless Sintering	29
Laser Selective Melting of Ti6Al4V/AlMgScZr Lightweight Metallic Multi-Materials: Parameter Optimization, Microscopic Characteristics, and Mechanical Properties	26
Advances in Biomaterials and Materials for Biomedical Applications	26
Investigation on Microstructure, Mechanical Properties, and Fracture Morphology of Al7075/TiB2 Composites	25
Molecular Dynamics Simulation of Cu/Ti Heterogeneous Interface Evolution and the Elemental Diffusion Behavior	25
Numerical Simulation and Sensitivity Evaluation of Process Parameters for AC-HVOF Spraying 3D Model	25
Effects of Process Parameters on the Accuracy of Directed Energy Deposition-Arc Lattice Structures	25
Volume Fraction Effect on the Mechanical and Shape Memory Properties of NiTi Gyroid Lattice Structure Fabricated by Laser Powder Bed Fusion	24
In the Final Analysis	23
Preparation of Novel (Hf0.2Nb0.2Ta0.2Ti0.2W0.2) B2 High-Entropy Boride Ceramics	23
Prediction of Melt Pool Geometry and Defects in Laser Additive Manufacturing of Inconel 718 Alloy: A Machine and Deep Learning Approach	23
Preview TMS Events at MS&T25	23
Improving Sintering Performance of Limonitic Nickel Laterite and Reducing Carbon Emissions via the Pellet-Sintering Process	23
Sharing Ideas Across Disciplines at TMS Specialty Congress 2025	23
Comparative Analysis of Impedance Matching Techniques in Wireless Power Transfer Efficiency: A Focus on Resonant, Adaptive, and Hybrid Approaches	22
Effect of Heat Treatment on Corrosion Properties of Ti-6Al-4V Titanium Alloy Produced by Electron Powder Bed Fusion	22
Effect of Loading Rate on Monocrystalline Germanium Nanoindentation Behavior Based on Molecular Dynamics	22
The Effect of the Percentage of Mg on the Properties of Cu-Mg Alloys Manufactured by Horizontal Continuous Casting Process	22
Effect of Innovative Mixed Collectors on the Improvement of Flotation Recovery of Lepidolite-Spodumene Ore	22
Effect of Sc on the Oxidation Behavior of Al-2Li Alloys in the Molten State	21
Evaluation of Analytical Methods Applicable for the Classification of Sulfur-Containing EP Additives and Their Raw Materials	21
A CFD Analysis of Oxygen Lance Configuration to Mitigate Dead Zones and Improve Steel Production in Electric Arc Furnaces	20
Kinetic and Mechanism of Ca Leaching in the Production of High-Purity Magnesia	20
Oxidation Behavior of Iron During Atmospheric Oxygen-Enriched Leaching of Zinc Oxide Dust	20
Surface Improvement of Ti-6Al-4V Alloy by Deposition of AlCrCoFeMnNi High Entropy Alloy Using TIG Process	20
Effect of Deformation Heat Treatment Process on the Grain Boundary Character Distribution of N06625 Alloy	20
Suppressing Ordering in Equiatomic Fe-Co via Laser Powder Bed Fusion	20
Novel Collector 4-Butoxy-Benzohydroxamic Acid: Utilization and Selective Adsorption Characteristics in Bastnaesite Flotation	20
Acid Leaching for Phosphorus Separation from the Co-processing of Dephosphorization Slag and Basic Oxygen Furnace Slag: Kinetics Investigation	19
Zinc Ferrite Conversion Kinetics and Mechanism During Roasting with Calcium Oxide	19
Innovative Stent Test Specimen by Additive Manufacturing for Reliable Mechanical Testing and Simulation	19
Preliminary Study on Machining of Additively Manufactured Ti-6Al-4V	19
Clean Practical Method for Cadmium Recycling from Toxic Material and Optimization of Recycling Process	19
Effect of Membrane Pore Size on Copper Recycling from Waste Printed Circuit Boards by Slurry Electrolysis	19
Effect of ZrO2 on Melting and Crystallization Properties of CaF2-CaO-Al2O3-MgO-TiO2 Electroslag	19
Hydride–Dehydride Processes and Behaviors for Ductile Refractory Complex Concentrated Alloys	18
A Novel Method for the Recovery of Li from Spent Lithium-Ion Batteries Using Reduction Roasting–Countercurrent Leaching	18
Microstructure and Mechanical Properties of AlCoCrFeNi High-Entropy Alloy-Reinforced Ti-Al Metallic-Intermetallic Composites	18
Advances in Sintering of Titanium Aluminide: A Review	18
Thermal Analysis of Continuous Casting Tundish Using a Conjugate Heat Transfer Model	18
Microstructural Investigation of Sn-Based Solder Reactions with FeCoNiCrMn High-Entropy Alloy at Various Temperatures	17
An Environmentally Friendly Method for Producing α-Fe2O3 Pigment from Low-Grade Hematite Residue	17
Investigation of n-ZnO/p-GaAs Heterojunction Solar Cell Using Two-Dimensional Numerical Simulation	17
Microstructure and Mechanical Properties of Nanocrystalline CoCrCuFeNi High-Entropy Alloy Coating Manufactured by Atmospheric Plasma Spraying	17
Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes	17
Synergistic Effects of Pre-charged Hydrogen and Tensile Stress on the Stress Corrosion Cracking of 2024-T351 Aluminum Alloy	16
Friction and Wear Behavior of Laser-Cladded TiAl Coating on TC4 Substrate from Room Temperature to 800°C	16
Past, Present, and Future of Fe-Mg Bioresorbable Alloys for Medical Applications	16
Recovery of Valuable Metals from Spent Al2O3-Based Catalysts by Sodium Carbonate Roasting and Water Leaching	16

Grain Rotation and Crack Propagation in Bulge-Tested Gold Films with 4D-STEM	16
Transient Multi-physical Field Coupling Simulation of Fe-0.2C-6Cu wt.% Alloy Melt Under Different Electromagnetic Fields	16
Efficient Zinc Removal from Blast Furnace Sludge Using Choline Chloride–Malonic Acid: Towards Sustainable Recycling of Iron Extraction Waste	16
Investigating Early-Stage Mineralization Behavior and Bioactivity of Acid-Free Bioactive Glass 45S5 with Enhanced Dissolution Kinetics	16
Exploring a Sustainable Approach to Antioxidant Potential of Iron Oxide Nanoparticles Synthesized Using Citrus sinensis Peel Extract	16
Activation Behavior and Mechanism of Sodium Sulfate for Iron Recovery from Red Mud through Magnetization Roasting–Magnetic Separation	16
Exploring the Influence of Composition and Microstructure on High-Strain-Rate Properties in Fe-Cu Alloys Made by Laser Powder Bed Fusion	15
Donors Build on TMS Foundation Success in 2024	15
Effect of Cooling Rate on the Microstructure and Mechanical Properties of Al-5Cu-0.38Mg-0.32Mn-0.1Ag Alloy Cylinder Heads	15
Highly Selective and Green Recovery of Lithium from Coal Gangue Using Recyclable Ammonium Fluoride Leaching System	15
Study of the Friction and Wear Behavior of Ti-6Al-4V Alloy Under Low Temperatures	15
JOM Machine Learning Showcase Topic: Submit Your Manuscript by May 1, 2023	15
JOM Technical Topics	15
Microstructural Evolution and Bio-Corrosion Behavior of a CP-Ti Processed by Multi-Pass of Severe Plastic Deformation	15
Collaboration and Connections: A Preview of ICME 2023	15
Processing and Characterization of a Mechanically Alloyed and Hot Press Sintered High Entropy Alloy from the Al-Cr-Fe-Mn-Mo Family	15
Research Progress and Development Trend of Amorphous and Nanocrystalline Composite Coatings: A Review	15
Effect of Al on the Properties and Structure of 7CrSiMnMoV Die Steel	15
Concentrating CaO from Lunar Simulant by Calciothermic Reduction Process	15
A Novel Magnetization-Modified Attapulgite as an Excellent Adsorbent for Tetracycline in Water	15
Synthesis of Metallic Nanoparticles from the Recovery of Secondary Sources: An Opportunity within the Circular Economy Process	15
Performance and Durability of Reversible Solid Oxide Cells with Nano-electrocatalysts Infiltrated Electrodes	15
Combined Application of Mechanical Deformation and Nitriding to Realize Optimal Mechanical and Anticorrosion Properties for 316 Stainless Steel	14
The Effect of Palygorskite on the Properties of Copper–Nickel Smelting Slag-Based Cementitious Materials	14
Investigation and Optimization of Electrochemical Lithium Storage in Natural Stibnite	14
Investigation of the Effects of Stress Triaxiality and Porosity on Failure Behavior of Binder Jetted 316 Stainless Steel Infiltrated with Bronze	14
Performance Simulation Methods for Shape Memory Alloy Hybrid Composites: A Review	14
Design of a Ti-Zr-P-Si Chromium-Free Passivation Composite Film with High Corrosion Resistance and Eco-Friendliness on Tinplate	14
Explorations of Energy Generation in a Two-Magnets Coil System Under a Large Spacer	14
TMS Welcomes New Members in May and August 2024	13
Effect of Electropulsing on the Microstructure and Mechanical Properties of AZ31 Alloys Manufactured by Cold Drawing	13
One-Step Calcification–Biomaterialization Transformation Process for Treating High-Iron Bauxite Ore	13
Microstructural and Mechanical Properties of AlCoCrFeNi2.1 Alloy Welded Joint by Vacuum EBW	13
Effect of Duplex Post-processing Treatment on the Surface Texture Characteristics of AlSi10Mg Alloy Processed by Laser Powder Bed Fusion Technique	13
Dislocation-Limited Thermal Conductivity in LiF: Revisiting Perturbative Models	13
Study on the Effect of Thermal Activation on Arsenic Removal from Industrial Wastewater	13
Residual Stresses in CuSn10 Structures: A Macroscopic Investigation of Scan Strategies and Heat Treatments	13
TMS Welcomes New Members in October 2024	13
Scale-Invariant Geometries Arising from the Interaction Between a 9%Cr Steel and Molten Nitrate Salt	13
Corrosion and Tribological Behaviour of GO-Reinforced Aluminium Alloy 5052 Fabricated by Accumulative Roll Bonding	13
Analysis of the Release Characteristics of Blast Furnace Lead Smelting Slag by Integrating Mineralogy and Dynamic/Static Leaching	13
A Novel SnBiInZn Medium-Entropy Alloy Solder with Low-Melting Point for 3D Electronic Packaging	13
Numerical Simulation of Residence Time Distribution (RTD) in Tundish with Channel Type Induction Heating	13
Identification of Potential TRIP Alloys by CALPHAD Methods, an Accessible Approach	13
JOM: The Magazine Talks with Slade Gardner of Big Metal Additive	13
Study on the Preparation of Reinforced Copper-Clad Steel Wires by Continuous Cladding and Rapid Solidification	13
JOM Technical Topics	13
Correction: Selective Adsorption Mechanism of Zinc Ions on the Surfaces of Galena and Sphalerite in the Flotation Separation of Pb-Zn	13
Revolutionizing Copper Nano-Networks: From Environmental Contaminants to Catalysts for Petroleum Systems, Agriculture, and Clean Energy Transition	13
Numerical Study of the Thermodynamic Behavior and Wear on the Surface of Hot-Rolling Descaling Roll	13
Microstructure and Properties of Dissimilar Butt Joints of Aluminum to Copper by Cold Metal Transfer with Preheating	12
Effect of Ni on Aging Behavior of Al-Cu-Mg Alloy Cladding	12
Sequestering of Radioactive Thorium from Wastewater Using Highly Porous Silica Monoliths	12
Effect of Hot Extrusion and Annealing Treatment on Microstructure and Mechanical Properties of In Situ Mg2Si and TiB2 Hybrid Particulates Reinforced Magnesium Matrix Composites	12
Novel Synthesis of CuW Composite Containing Micro- and Nano-tungsten Particles Coated with SixWy Phase via Silicothermic Coupling with Aluminothermic Reduction	12
Processing an 18Cr-8Ni Austenitic Stainless Steel Without the Dilemma of the Strength and Ductility Trade-Off	12
Chloro-deoxidation Behavior of Titanium Powder with SnCl2 Addition	12
Influence of Solutal Marangoni Effect on Droplet Behavior in Metal-Slag Emulsion System: A Numerical Study	12
Effect of Precipitates on Dynamic Recrystallization and Texture of Mg-Sn Alloy Under Different Strain Rates	12
Behavior and Kinetics of Pressurized Methylsulfonic Acid Leaching of Copper from Complex Chalcopyrite Calcine	12
An Investigation of Energy Dissipation in Beta III Titanium Alloy	12
Lens-Free Optical Scanners for Metal Additive Manufacturing	12
Study on the Microstructure, Mechanical Properties and Electrical Properties of Copper-Coated Carbon-Reinforced Aluminum Matrix Composites Prepared by Powder Metallurgy Method	12
Study of High-Performance Solid Oxide Electrolytic Cell Based on BaZr0.8Y0.2−xSmxO3−δ Proton Conductor Electrolyte	12
Enabling Cost-Based Support Structure Optimization in Laser Powder Bed Fusion of Metals	12
Effect of Mn on the Microstructures and Magnetic Properties of Medium-Grade Non-oriented Silicon Steel Without the Normalizing Process	12
Preparation and Characterization of γ-Al2O3 from Coal-Bearing Kaolinite	12
Prospects of Natural Fiber-Reinforced Polymer Composites for Additive Manufacturing Applications: A Review	12
Effect of Heat Treatment on the Microstructure and Properties of Ni51.3Ti Shape Memory Alloy by Wire Arc Additive Manufacturing	12
Recovery of Cerium from Automotive Catalytic Converters	12
Effect of Multidirectional Forging on the Microstructure Evolution and Mechanical Properties of Mg-2Sn-2Zn-0.7Mn-0.5Ca Alloys	12
Pulsed Laser Additive Manufacturing for 316L Stainless Steel: A New Approach to Control Subgrain Cellular Structure	12
Evaluation of Thermal Stability of ODS FeCrAl Alloy at Short-Term High Temperature	12
Ultrasonic-Assisted Exfoliation Bulk-Phase of MoS2 with Chitosan/Acetic Acid Solution	12
Reduction and Melting Behavior of Pre-reduction Metallized Carbon-Bearing Pellets in Iron Bath Smelting Reduction Furnace	11
In the Final Analysis	11
Solute Redistribution During Aging in a Laser-Based Powder Bed Fusion-Produced Fe-18Ni-9Co-5Mo-Ti Maraging Steel	11
A New Review on Inclusion and Precipitate Control in Grain-Oriented Silicon Steels	11
Application of Steel Slag in Road Semi-Rigid Subgrade and its Volume Stability Modification Progress Study	11
Resolving the Subsurface Residual Stress Maximum in Laser Powder Bed-Fused 316L Stainless Steel by Diffraction-Based Analysis	11

Enhanced Carbonation of Free CaO in Basic Oxygen Furnace Slag Under High Temperature and Moderate Pressure and Its Kinetics	11
Improving the Sintering Properties of Manganese Ore Fines via Blending Different Manganese Ore Fines	11
TMS Members Benefit from the 2022 Emerging Leaders Alliance Conference	11
Technical Application of Recovery Nickel and Molybdenum from Nickel-Molybdenum Ore by Shearing-Enhanced Ammonia Leaching	11
Parameter Optimization of Cu/Co-Mo Amorphous Coating Prepared by Composite Co-deposition on Aluminum Alloy Surface	11
In Situ, Parallel Monitoring of Relative Temperature, Material Emission, and Laser Reflection in Powder-Blown Directed Energy Deposition	11
The Influence of L-PBF Process Parameters with Platform Preheating on the Structure and Properties of Orthorhombic Titanium Aluminide Ti2AlNb Alloy	11
Preparation and Microwave Absorption Properties of Annular Fe3O4/rGO@PANI	11
Improving the Pitting Corrosion Performance of Additively Manufactured 316L Steel Via Optimized Selective Laser Melting Processing Parameters	11
Numerical Simulation and Experimental Study of Shear-Enhanced Goethite Process for Iron Removal	11
JOM: The Magazine Talks with 2021 TMS President Ellen Cerreta	11
TMS Member News	11
Tapping Gas from the Silicon Submerged Arc Furnace: An Industrial Measurement Campaign	11
Investigation of Chemical Species in the Corrosion Barrier Layer on Thermal CO2 Treated AZ91D Magnesium Alloy with Lithium Nitrate	11
A Review on Curcumin-Loaded Electrospun Nanofibers and their Application in Modern Medicine	11
Influence of Zirconium and Processing Modes on Microstructure and Properties of Mechanically Alloyed Al-10%Al2O3 Composite	11
Simultaneous Extraction of Fe, Al, Sc and Cr from Red Mud by Ammonium Sulfate Calcination in the Range 250–400°C	11
Effect of WC Powder Addition on Microstructure and Wear Resistance of Laser Cladded 35CrMnSi Cladding Layers	11
Thermodynamic Analysis of the Synergistic Smelting Process of Complex Antimony-Gold Concentrate and Lead Concentrate	11
Friction Stir Powder Additive Manufacturing of Multi-track Depositions of Al 6061 Alloy for Cladding and 3D Printing Applications	11
Artificial Intelligence in Materials Education: A Roundtable Discussion	11
Tribological and Corrosion Behavior of 5083Al/Al2O3 Interpenetrating Phase Composites in Simulated Seawater Environment	10
Effect of Trace V on the Microstructure and Properties of Al-Zn-Mg-Cu Alloys During Heat Treatments by Twin-Roll Casting	10
Molecular Dynamics Simulation and Experimental Study of Brittle-Plastic Transition Behavior of Monocrystalline Ge at Micro- and Nano-scale	10
Construction of High Stability Titanium Dioxide/Carbon Nanotube Anode Material Based on Titanium-Containing Blast Furnace Slag	10
Deep Learning-Enhanced Jewelry Material Jadeite Jade Quality Assessment	10
Crack Formation in Chill Block Melt Spinning Solidification Process: A Comparative Analysis Using OpenFOAM®	10
Member News	10
Lightweight CrxV0.5Nb0.5ZrTi Refractory High-Entropy Alloys: Microstructure and Mechanical Properties	10
JOM Talks with 2022 TMS President Jud Ready	10
Optimizing Ni/Ni-Cu Multilayer Alloy Coating via Pulsed Electrodeposition: Process Parameter Analysis and Antibacterial Performance	10
Timed Thermodynamic Process Model Applied to Submerged Arc Welding Modified by Aluminium-Assisted Metal Powder Alloying	10
Effect of In-Situ Catalyst on Co Extraction from Lithium-Ion Battery Scrap Via Selective Sulfation Roasting	10
Analysis of Elastic-Plastic Deformation Law on 3C-SiC Ceramic Parts with Different Indenters by Nanoindentation via Molecular Dynamics Simulation	10
Bone Response to Biodegradable Metals and In Vitro Evaluation of the Cytocompatibility	10
Real-Time Non-invasive Velocity Field Measurement of Molten Iron Jet Discharged from Blast Furnace	10
Investigation of Demagnetization Effect on C-Shape Anisotropic Ferrite Permanent Magnet	10
Formation, Aggregation, and Composite with Oxide Mechanisms of Oxysulfide in 1215MS Free-Cutting Steel	10
Study of the Constitutive Equations of Austenitic Stainless Steels under High Strain Rate Loading Considering Phase Transformation Effects	10
Parametric Optimization of Microhardness of Electroless Ni-Zn-Cu-P Coating Using Taguchi Design and Artificial Neural Network	10
Role of Cr in the Anticorrosion Ability of Weathering Steel Based on the Microcharacteristics of Synthetic α-FeOOH in the Presence of Cr(III)	10
TMS Meeting Headlines	10
Age-Hardening Behavior and Phase Transformation of Mg-9.2Gd-1.9Y-1.8Zn-0.5Zr Alloy	10
Investigation on the Tension–Compression Asymmetry of CoCrFeNiAl High-Entropy Alloy Under the Influence of Twinning Boundary Spacing	10
Effect of Forging on the Microstructure and Mechanical Properties of Cast-Forging Integrated Knuckle Forming	10
Microstructures, Mechanical and Electrochemical Properties of Monbta-Based Refractory Multi-component Alloys	10
Influence of Annealing Temperature on the Microstructure and Mechanical Properties of a Fe60Co10Cr10Ni10Mo5V5 Medium-Entropy Alloy	10
Fabrication and Performances of Piezoelectric Functional Gradient BLF-xPT Ceramic Actuators by the Tape Casting Method	10
Reactive Synthesis in Additive Manufacturing of an Ultrahigh Temperature MoSiB Alloy	10
Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate Gradation Optimization	10
DTPA-Assisted Selective Leaching of Mo, Co, Ni, and Al from Spent Hydrodesulfurization Catalysts	10
Cross-Disciplinary Learning and Collaboration: A Preview of the TMS Specialty Congress 2024	10
Phase Equilibria of the Fe-Mn-Zn System at 600°C	10
Extraction of Critical Metals from Secondary Source: Leaching Ti and V from Brazilian Fe-Ti-V Deposit Residue	10
JOM Technical Topics	10
Providing a Rigorous Benchmark Measurement Foundation for Modeling-Informed Qualification and Certification of Metal Additive Manufactured Components	9
Research on the Performance of the Deep Drawing Formation Process for AZ31 Magnesium Alloy	9
Numerical Study on Gas-Metal-Slag Interaction with Single-Flow Postcombustion Oxygen Lance in the Steelmaking Process of a Top-Blown Converter	9
High-Temperature Phase Behavior of Li2O-MnO with a Focus on the Liquid-to-Solid Transition	9
The Properties and Defect Optimization of Ni45A/TiC Composite Coatings by Laser Cladding	9
Salt-Frost Damage and Life Prediction of Nano-SiO2 Polypropylene Fiber Aeolian Sand Concrete	9
Microscopic Analysis of the Synergistic Mechanism of Strength and Toughness of Magnesium Alloys Reinforced by Graphene Nanoplatelets	9
Exploring the Interface Structure on Interfacial Thermal Conductivity by Constructing Sandwich-like Cu/Diamond Slice/Cu Composite	9
Effect of Heat Treatment and Electrochemical Potential on Tribocorrosion Behavior of High-Strength Low-Alloy Ship Mooring Chain Steel	9
A Recent Innovation in Stir-Cast Aluminium Metal Matrix Composites to Improve Mechanical and Wear Properties with Potential Applications: A Review	9
Influence of Yttrium Oxide Distribution on Microstructure and Properties of Zirconia Based on Alternative Doping Routes	9
3D Printing Iron/Iron Oxide Composites by Metal Material Extrusion from an Industrial Waste	9
A Material-Oriented Metallurgical Strategy to Prepare LiNi0.8Co0.15Al0.05O2 Cathode Material from Low-Nickel Matte	9
Standardization Gaps in Powder Feedstock Characterization and Establishing Acceptability for Reuse in Additive Manufacturing	9
Evaluation of High-Vacuum Annealing and Hot Isostatic Pressing on the Microstructure and Properties of an Additively Manufactured Niobium Alloy	9
Evolutions of Microstructure and Mechanical Properties of Cryorolled 7085 Al Alloy After Annealing Treatments	9
Adaptive Fatigue-Based Process Windows for Ti-6Al-4V Laser Powder Bed Fusion Using Fused Data and Meta-Analysis	9
Preparation of Aluminum Dross Microporous Bricks and the Pore Formation Mechanisms	9
Two-Month In Vitro Degradation of 3D-Printed Biodegradable FeMnC Alloys for Biomedical Applications	9
In the Final Analysis	9
Trends in Metal-Based Composite Biomaterials for Hard Tissue Applications	9
Phase Equilibria in the System Nb2O5-MgO-SiO2 at 1673 K and 1523 K in Air	9
Zinc Chloride-Activated N-Doped Super-Activated Carbon Derived from ZIF-8 with Optimized Pore System for Electrochemical Supercapacitor with Enhanced Energy Density	9
Study on Explosive Welding of A7075/A1060/Ti-6Al-4V and Its Mechanical Properties	9
Magnetic Field-Assisted Laser Cladding of Cobalt-Based Alloy on 300 M Steel	9
Crafting Multifunctional Materials with Tailored Mechanical and Magnetic Properties by Solid-State Non-equilibrium Processing	9
Studies on Laser Shock Peening on Nanomechanical and Mechano-Chemical Properties of Titanium Alloy (Ti6Al4V)	9
Deformation Mechanism Transition in Additively Manufactured Compositionally Graded Fe-Base Alloys	9
Effect of Low Cu Content and Heat Treatment on the Microstructure and Mechanical Properties of High-Vacuum Die-Cast AlSiMgMn Alloys	9
The Effects of Severe Torsion on Microstructure, Texture, and Mechanical Properties of a Pure Nickel Rod	9
Selective Removal of Lead (II) Ions from Wastewater with Fabricated ZnO-PVA Membrane	9
Improving Tapping Experience—and Why to Choose a Comprehensive Approach	9
Melting Before Our Eyes: A Materials Art Mystery	9
A Mini-Review on Useful Strategies for Improving the Electrochemical Performance of Graphene for Supercapacitor Application	9
Irradiation Testing: Facilities, Capabilities, and Experiment Designs	9
Recycling of Yttrium and Europium from Microwave-Roasted Waste Cathode Ray Tube Phosphor Powder	9
Synergistic Mechanism of Sodium Fluorosilicate and Sodium Chlorate in the Extraction of Vanadium from Stone Coal	9
Effect of Thermal Exposure Temperature and Time on Friction and Wear Properties of TiAlSiN Gradient Coatings	9
Characterization and Tribology Performance of Refractory Materials Coatings with Blast Furnace Slag (BFS) Fabricated by Thermal Spraying	8
Tuning the Physical Properties of Ag and ZnO Nanoparticles to be Applied in Various Applications	8