Integrated Ferroelectrics

Papers
(The median citation count of Integrated Ferroelectrics is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Technology Research on the Preparation of DBR Semiconductor Lasers by Electron Beam Lithography17
Application of Gas Explosion Nanometer Powder Suppression Material in Coal Mine Safety16
Kinetic Study of Tetrakis(Dimethylamido)Titanium and Titanium Tetrachloride Adsorption on a Silicon Surface in Atomic Layer Deposition: A DFT Calculation16
Improved Electroactive β Phase Nucleation and Dielectric Properties of P(VDF-HFP) Composite with Al(NO3)3·9H2O Fillers12
Plantar Pressure Distribution Measurement System Based on PVDF Piezoelectric Senors11
Dielectric, Pyroelectric and Ferroelectric Properties of Sn2P2(SexS1-x)6 Single Crystals11
Point Defects in Rare-Earth Perovskite Systems BaMO 3 ( M = Ce, Pr and Tb) on Dielectric and Magnetic Behaviors10
Fluorescence Quenching Probe Based on Graphene Quantum Dots for Detection of Copper Ion in Water10
Physical, Optical, and Photoluminescence Properties of Cr 2 O 3 in Borosilicate Glasses10
Temperature Effect on Fatigue Behavior of BCZT Ceramics and Defects Analysis by Synchrotron X-Ray Absorption Spectroscopy10
Fabrication of 0.7BaTiO 3 -0.3Ni 0.7 Zn 0.3 Fe 2 O 10
Thermal and Tensile Properties Preparation of Negative Thermal Expansion Polymer Composite ZrW2O8-Cf/E519
Effect of Thickness Ratio on Ferroelectric Polarization and Hysteresis Behaviors of BaTiO3/SrTiO3 Superlattices9
Novel Broadband Circularly Polarized Antenna based on Chamfered and Stair-Shaped Dielectric Resonator9
Effect of Deformation Degree on Microstructure and Texture of AZ31 Magnesium Alloy in Hot Drawing9
Design of Piezoelectric Energy Harvesting Structures Based on Proof Mass Analysis-Simulation and Experimental Study8
Structural and Luminescence Characterizations of Tb3+ Ion Doped Boro-Tellurite Glasses for LED Applications7
Electrical Properties of New Carbon-Based Magnetic Nanomaterials and Spintronic Device Design7
Research on Modeling of Milling Force of Ball-End Mill Cutter in Multi-hardness Splicing Area of Automobile Panel Die Steel7
Modeling and Simulation of Dual Beams Hybrid Energy Harvester for Bridge’s Health Monitoring Systems7
Crystalline Structures, and Microwave Dielectric Properties of Low-Fired Li2ZnTi3O8 Ceramics Doped with TLBBC7
Synthesis and Investigation of Structural and Optical Properties of Nitrogen-doped Carbon Quantum Dots7
Data Governance Architecture of Digital Grid Based on Blockchain Technology and Nanomaterial Technology7
Investigation of the -Mercaptobenzothiazole (2-MBT) organic single crystals and Third Order Nonlinear optical applications6
Effect of Isostatic Pressing Support on Forming Force in Single Point Incremental Forming6
Optimization of Atrium Thermal Environment in Summer Based on DeST Platform6
Analysis of Microstructure and Mechanical Properties of AZ31B Thick Plate Magnesium Alloy Stir Friction Welded Joints6
Charged Particles and Gamma-Ray Interaction with Gallium Barium Borate Glass: Theoretical Approach6
Facile Synthesis of Porous Carbon Derived from Rice Husks with Enhanced Capacitance Performance6
Study of White Light Emission from Europium (III) Doped Gadolinium Oxide Phosphors6
A/B Site Modified MgTiO3 Dielectric Ceramics for Microwave Application6
Guest Editorial6
MnCoOx@Graphene Derived from Dual MOFs as Superior Anode for Lithium Ion Batteries6
Reducing Search Space for Halide Perovskites: Comparing New Simple Material Model (NSMM), Coin-Flip, Goldschmidt’s Tolerance Factor Formalism (GTFF), and SPuDS Algorithm5
Fixed-Time Tracking Control of Wireless Power Transfer Systems with Disturbances and Current Constraints5
Preparation and Properties of Multifunctional Nanocellulose-Reinforced PVA Ionic Hydrogel5
ATCA Multi-Node Management System Protocol Optimization5
Effect of Heterogeneous Composite Structure on the Microstructure and Properties for Nanostructured 2205 Duplex Stainless Steel5
Synthesis, Structure and Thermal Properties of the Cu 2 NiSeTe5
Enhancement of Energy-Storage Properties and Temperature Stability in Complex Perovskite (1− x )NaNbO 3x 5
Sintering Temperature Effect on Phase Formation, Microstructure and Electrical Properties of Modified KNLNTS Solid Solution Prepared via the Solid-State Combustion Technique5
Novel Temperature-Stable MgTi0.95Sn0.05O3-Based Microwave Dielectric Ceramics5
Phononic Crystals With Archimedean-like Tiling: Band Structure and the Transformation of Sound5
Preparation of BiOCl Photocatalyst and Its Finishing on Plasma Treated Polyester Fabric5
Broadband 1.53 μm Emission and McCumber Analysis of Er 3+ Doped Alkali Oxyfluorophosphate Glass for Fiber Optic Communication Material5
Research on Workpiece Intelligent Detection Method Based on SSD Algorithm and Transfer Learning4
Prediction of Machining Distortion of Long Beam Monolithic Components Based on the Energy Principle4
Preparation of Functionalized Carbon Nanomaterials and Their Applications in Polymer Solar Cells4
Optimization of Machining Path for Complex Surface Milling in TC11 Based on the K-Means Algorithm4
Effect of Different Content of CeO 2 on the Evaluation of Micro-Structure and Wear Data of Boride Layer of Iron Based Powder Metallurgy Materials4
Outstanding Electrochemical Performance of Planar On-chip Micro-supercapacitors Based on Nitrogen and Oxygen Co-doped Graphene Quantum Dots at High Scan Rates4
Preparation and Hydration Mechanism of Al-F Complex Alkali-Free Accelerator by Waste Acid of Titanium Dioxide4
Enhanced Energy Storage Properties in Lead-Free 0.92(Bi0.5Na0.5)TiO3–0.08BaTiO3 Ceramics via Ce Doping4
Radiation and Fast Neutron Shielding Properties of Nickel-Based Superalloys: Inconel 600, 718 and 725 Superalloys4
Micro-Reducing Atmosphere with High-Rate Capability Performance of Carbon-Coated LiFePO 4 Prepared from Spray-Drying-Assisted Solid-Phase Reaction4
Linear Displacement Boundary Condition Replacing Periodic Boundary Condition to Easily and Efficiently Homogenize the Elastic Properties of Composites4
A Joint Experimental and Theoretical Approach for Investigation of Structural Contributions to Ferroelectricity of Nanocomposites from Cellulose Nanoparticles and Glycine Silver Nitrate4
Preparation of Phenylalanine-Based Polyesteramide Nano-Drug Delivery System and Its anti-Prostate Cancer Effect in Vitro4
Firing Temperatures Effect on Phase Formation, Microstructure and Electrical Properties of BNBKL Ceramics Fabricated via the Solid-State Combustion Technique4
Proton, Alpha, and Gamma Rays Interactions of CsI(Na) Scintillator Using the Theoretically Computational Program4
Preparation and Performance Study of S-Doped g-C 3 N 4 Photocatalyst4
Study on Hydrothermal Arsenic Fixation in H 3 AsO 4 -FeSO 4 -Na 2 4
Study on Microstructure and Properties of Cu-Zr Alloy Prepared by Mechanical Alloying4
The Investigation Optical, X/γ-Rays and Neutrons Shielding Properties of BaO Based on Steel Slag Glass System4
Synthesis and Antibacterial Application of Antimicrobial Peptide CLKGPIC3
Preparation of Composite Multi-Iron Material 0.2NiFe2O4/0.8BaTiO3 and Its Application in Sports Practice3
White Emission from Dy3+ Doped in ZnO – CaO – B2O3 for WLEDs Material Application3
Adsorption of NH3 on Monolayer SiC Doped with Noble Metals: A First-Principles Study3
Enhancement of Luminescence Properties of Er3+/Yb3+:P2O5 + BaO + La2O3 Glasses for Photonic Applications3
Investigation of Manganese Oxide (MnO 2 ) Doped in Calcium Sodium Borosilicate Glasses for Photonics Materials Application3
Nonlinear Current–Voltage Properties of Polymer Composite Doped With Calcium Copper Titanate Fibers3
Preparation of Organic Ferroelectric Material P (Vdf-Trfe) Nanostructure and Its Application in Process Simplification3
Functional Nano-Silicon Dioxide Composite Piano Keys to Improve the Performance of Music in Piano Performance Strategy3
Fabrication of Multiscale-Alumina Particles Reinforced Copper Matrix Composites with High-Energy Ball Milling and Hot Pressing3
The Mechanical, Electronic and Optical Properties of Sn2P2S6 Compound in Different Phases3
Dy3+-Doped Li2O: BaO: Gd2O3: SiO2 Glasses for Luminescence Applications3
Hot Tearing Susceptibility and Solidification Behavior of Mg-xGd-(4-x)Y-2Ni-0.5Zr Alloys3
Sintering Temperature Effect on the Structural Phase, Microstructure and Electrical Properties of 0.92BNKLT-0.08BST Ceramics Prepared via the Solid State Combustion Method3
Construction of Nano Chiral Molecules and Analysis of Self-Repairing Mechanism of Coating3
Electrochromism in Nanoporous Tungsten Trioxide Films Prepared through Anodization and Thermal Oxidation3
Comparative Study in Ca3Co4O9 and CaMnO3 Perovskite Structure-Based Thermoelectric Oxide3
Preparation of EuVO4 by Hydrothermal Method and Its Photocatalytic Activity3
Research on the Influence of Alumina Ceramic Microstructure on Diamond Wire Sawing3
Experimental Study on Surface Microscopic Characteristics of scCO 2 -MQL Milled γ-TiAl Alloy3
Effects of Er Dopant on Structural and Optical Properties of BiVO4 Powders Prepared via Sonochemical Process3
Effects of Nanometer Hydroxyapatite Aqueous Solution on Anaerobic Motor Ability of Mice3
Experimental Study on the Preparation of Polycarboxylic Acid System3
The Relationship of Phase Structure, Microstructure and Electrical Properties of BNT-BT-BST Ceramic3
Phase Structure, Microstructure, and Electrical Properties of Bi 0.47 Na 0.47 Ba 0.06 TiO 3
Luminescence and Energy Transfer of Tb3+/Dy3+ Co-Doped SiO2-Al2O3-B2O3-La2O3-Gd2O33
Layered GeP2S6, GeP2Se6, GeP2Te6, SnP2S6, SnP2Se6, and SnP2Te6 Polar3
Influence of Pulse Energy and Scanning Speed of Femtosecond Laser on Surface Roughness of SiC Ceramics3
Numerical Simulation of Temperature Field for Laser Removal of Oxide Layer of AlSi10Mg(Fe) Aluminum Alloy3
Modeling and Simulation of the Impact Behavior of a Sports Knee Joint Protector Using the Preparation Method of Ferroelectric Photovoltaic Thin Film3
White Light Emission of Dy3+ Doped Oxy-Fluoride Phosphate Glass System for Active Laser Medium3
Study on the Preparation and Fluorescence Properties of Sr 3 Y(PO 4 ) 3 : Dy 33
The Effect of Calcium Fluoride in Lithium Phosphate Oxide (LPO) Doped with Sm3+ Content3
Effect of Soaking Time and Sb2O3Concentration on Number of Bubble and Optical Properties of Borosilicate Glasses3
Intrinsic Enhancement of Permittivity with Ultralow Dielectric Loss in Donor-Acceptor Co-Doped Rutile TiO2 Ceramics3
Experimental Study on the Effect of Clinker Mineral Composition on the Properties of Portland Cement3
Human Movement and Attitude Detection System Based on Flexible High Tensile Sensor of Single-Walled Carbon Nanotubes3
Effect of Sb2O3 Addition on Properties of BaTiO3 Ceramics2
Study on Properties of Mg-Al Spinel Ceramics Prepared by Casting Sintering Method2
Effect of Modified Nano Silica on the Protective Effect of Cement-Based Penetrating Crystallization Coating2
Application of Ultraviolet Spectrum Analysis in Handwriting Test of Carbon – Free Carbon – Copy Documents2
Effect of Fly Ash on Properties of Mixed Aggregate Plastering Mortar2
Comparative Properties Investigations of Organic Doped Hybrid-Perovskite Solar Cells2
High Performance of W-Shaped Piezo Electric Energy Harvester for Smart Building Application2
Effect of Gd3+-Sm3+ Energy Transfer on the Luminescence Properties of Ba-Na-B Glasses2
Probing the Local Structure of CuO-Doped (Ba 0.85 Ca 0.15 )(Ti 0.90 Zr 0.102
Potential of Cost-Effective Phosphoric Acid-Based Geopolymer as Photocatalyst for Dye Wastewater Degradation2
Sintering Mechanism and Microwave Dielectric Characteristics of Low-Fired Mg4Nb2O9 Ceramics for LTCC Applications2
Phases and Morphology of CuFeSe2 Films Prepared by Electrodeposition2
Polarization Plateaus and Hysteresis Behaviors of a Stanene-like Nanostructure: Monte Carlo Simulations2
The Dynamic Characteristics of AC Contactor Are Studied Based on Finite Element Simulation2
Performance Control for Nonlinear Hadoop-Mapreduce Computing Systems2
The Preparation of Au-Loaded Ti3C2 Nanosheet and Research on Its Electrocatalytic Nitrogen Reduction Performance2
Continuous Preparation of Precious Metal Nanoparticles from Plant Biomass and CFD Simulation2
Quantitative Characterization of the Lower Limit of the Physical Properties of Tight Oil Reservoirs in Nano-Material Porous Media2
Property Research on Nano-Micro Crystalline Diamond Coated Tools Lapping Sapphire Wafer2
Study on Properties of Graphene Oxide Modified Recycled Cement-Based Composites2
Tunable Electronic and Magnetic Properties of T-CrTe2 Monolayer by Li Adsorption2
Research on Preparation and Mechanical Properties of Multilayer Graphene Reinforced Aluminum Matrix Composite2
Preparation, Characterization and Hydrothermal Stability of Hydrophobic TiO2/SiO2 Membrane2
Fuzzy PID Composite Control of Hydrostatic Center Frame2
Effects of Ba(Ti0.90Sn0.10)O3 on Electrical Properties of Bi0.5Na0.5TiO3-0.06BaTiO3 Lead-Free Piezoelectric Ceramic System2
Correction2
Synthesis and Characterization of La-Doped Hafnium Oxide Thin Films by Sol–Gel Method2
Investigation on the Role of Polypyrrole/Carbon Black Nanoparticles in the Electromechanical Behavior of Modified P(VDF-HFP)2
Silk Fibroin/Amino Acid Hybrid Organic Piezoelectric-Triboelectric Nanogenerator2
Modification of Structural and Dielectric Properties of SmFeO 3 Orthoferrites System by Ce Doping2
Dynamic Cutting Force and Stress Distribution of Carbide Insert during Asymmetric Milling of 508III Steel2
Slater Insulator Phase of X2 (X = Na, Li)IrO3: First Principles Calculation2
The Fundamental Gamma Rays and Charge Particle Interactions of the CeBr 3 Scintillator2
Structural and Electrical Characterization of SrMn0.97Ce0.03O3 Ceramics2
Spectroscopic Characterization and CIE Coordinate of Pr3+ Ions Doped Pottasium Aluminum Gadolinium Phosphate Glasses2
Structural Studies of Ce 4+ Ion Substituted BCZT Perovskite Ceramics2
Research on Surface Integrity of Mesoscopic Geometry Tool Milling Titanium Alloy2
Dielectric Properties of Low-Fired MgTi0.9Zr0.1O3 Ceramics with LBB Additive for LTCC Applications2
Preparation and Characterization of Iron Oxide Low-Dimensional Nanomaterials2
Lowering Synthesis Temperature of BaTiO3-Bi(Zn0.5Zr0.5)O3Ceramics by Salt Flux Assistance and Dielectric Properties Investigations2
A New TOC Measuring Device Based on UV Oxidation and Electrical Conductivity Measurement2
Frequency Response of a Ferroelectric Composite Synthesized from Cellulose Nanoparticles and Rochelle Salt2
Investigation on Utilization of Sodium Silicate Synthesized from Agricultural Waste as a Dispersant in Clay-Based Slip for Ceramic Production2
Effect of Ligands on Luminescent Properties of Rare Earth Europium Complexes2
Preparation and Characterization of Co-Modified Bimetallic MOF-74-NiCo as an Efficient Catalyst for Low Temperature CO-SCR2
Preparation and Mechanism of SiO2 Aerogel Gypsum Based Materials2
The Tribology and Erosion-Corrosion Resistance Properties of Fe-Cr-Ni-Si and WC Alloy Coating2
Dielectric and Piezoelectric Properties of Sr1-2xNaxSmxBi4Ti4O15 (x = 0–0.4) Ceramics2
Effect of Sputtering Conditions on the Microstructure and Optical Properties of SnO 2 Thin Films2
Application of Novel Nanomaterials to Assist the Repair of Neutral Ligament Injuries in the Field of Sports2
Development and Performance Characterization of Lightweight Foam Glass Mixed with Coal Waste2
First Principles Study of Structural Phase Transition in Ag2S under High Pressure2
Catalytic Conversion of Ni 12 P 5 in Situ on the Surface of Carbon Nanotubes to Promote Polysulfide Conversion in High-Performance2
Synthesis and Characterization of ZnS Nanoparticles by Chemical Co-precipitation Method2
Ferroelectric Switching and Phase Transition in Composites from Ferroelectric Metal–Organic Framework of [ND4][Zn(DCOO)3] and Silicon Dioxides2
Optical Fiber Bragg Grating Angle Sensor by 3D-Printing Technology for Body Postures Analysis2
Piezoelectric PVDF-TrFE/PET Energy Harvesters for Structural Health Monitoring (SHM) Applications2
Facile Construction of Gelatin/Polyacrylamide Acrylic Acid/Sodium Alginate-Based Triple-Network Composite Hydrogels with Excellent Mechanical Performances2
Effects of Composite Systems on Sintering Properties of Aluminum Oxide Ceramics2
Effect of Gadolinium Oxide and Gadolinium Fluoride in Borophosphate Glasses Doped with Tb 2 O 3 Content2
Modeling and Low Light Level Detection Based on Quantum Dots Photodetector2
Effects of La-Doped HfO 2 Films on Dielectric Properties by Sol-Gel Method2
Characterization and Photocatalytic Activity of Er 2 Ti 2 O 7 Prepared by Sol-Gel Method2
White Light Emission and Judd-Ofelt Analysis of Dy 3+ Doped Mixed Alkali Borate Glass for W-LEDs Material2
Nanomaterials Based on Natural Polyphenol Compounds in the Surgical Treatment of Breast Cancer2
Alkyl Chain Modification is Used to Improve the Tumor Diagnosis and Treatment Performance of D-A-D Conjugated Small Molecules2
Observation of LiNbO3 Ferroelectric Domain Image Structure Using Electrostatic Polystyrene Nanoparticles Based on Digital Image Technology2
Effect of Low-Temperature Deformation on the Ex Luminescence of KI Single Crystals2
Preparation and Characterization of Cu2O Thin Films by Electrodeposition in Acidic Media2
One Pot Synthesis and Analytical Properties of Sr Doped NiCo2O4 Nanoparticles for Application in Electrochemical Supercapacitors2
Synthesis, Characterization, and Photocatalytic Property of Ba-Doped ZnO Nanoparticles Synthesized Using Facile Precipitation2
White Emission from Li2O-BaO-Bi2O3-P2O5 Glass Doped with Dy3+ for Optical Condensed Material Applications2
Sol-Gel Derived Chromium Doped Vanadium Pentoxide Based Nanostructured Electrode Materials for Supercapacitor Applications2
The Research on the Cutting Test of Ni - Based Superalloy GH4169 and Optimization of Process Parameters under High Pressure Cooling2
The Optimization Method of Magnetic Flux Leakage Detection Equipment in Rail Surface Inspection Based on Finite Element Simulation2
Massage on Muscle Enzyme Histochemical Changes of Sport Peripheral Nerve Injury in Wushu2
Highly Stable Oil-Soluble Iron-Sulfur Nanoparticles: Preparation, Characterization and Electrochemical Properties2
Soft Chemical Synthesis and Physico-Chemical Characterization of Cobalt-Doped Gd2O3 Nanoparticles2
Determination Thermal Stability of Two Kinds of Phosphor Synthesized by Soft Chemistry——WASSR Method ([ZnEu 2 (2,5-PDC) 4 (H 1
Effect of Weight Ratio of Graphene Oxide and Carbon Nanotubes on Electrochemical Performance of Planar On-Chip Micro-Supercapacitors1
Physical Sensor for Electronic Skin Based on Nanomaterials: A Review1
Phase Evolution, Microstructure and Electrical Behavior of (Ba0.97Ca0.03)(Ti0.94-x/2Sn0.06-x/2Wx)O3 Ceramics Synthesized via the Solid1
Overview and Research on Signal Readout Technology of Microcantilever Sensor1
Influence of Nanomaterials on Physical Mechanics and Durability of Concrete Composite Piers1
Effect of Rehydration on Properties of Cement-Fly Ash System1
The Impact on Addition of WO3 for Radiation Shielding Properties of TeO2–BaO Glass System1
Effect of Layering Methods on Microstructure and Bending Properties of BF/CF Composites1
Application and Development of Nano Material Technology in Archives Protection Technology1
Preparation of TiO2Electrochromic Films by B3+Doping and Its Properties1
Dielectric Spectroscopy and Electric Modulus Analyses of Ti0.8O2 Nanosheets‒Ag Nanoparticles‒Cellulose Filter Paper Composites1
Study on Friction Reduction and Wear Resistance of Surface Micro-texture of YG8-Ti6Al4V Friction Pair1
Synthesis of Mg Doped Lithium Niobate Crystalline Powder by Partial Liquid Phase Method1
Fabrication and Characterization of Eu3+ Doped Tellurite Glasses for Laser Materials1
Influence of Calcium Fluoride on the Radiative Properties of Sm 3+ Doped Zinc Borophosphate Glasses1
Output Feedback for Nonlinear Systems With Nonlinear and Discontinuous Inputs1
Design and Simulation of Electroacoustic Transducer Based on Giant Magnetostrictive Material1
Influence of Calcination Temperature on Structure-Property Relationship in BCZT Lead-Free Piezoceramic1
Crystal Structure, Rietveld Refinement and Improved Dielectric and Magnetic Properties of Ti Doped Bi0.90Pr0.10Fe1-xTixO31
Ferroelectric and Magnetic Optimization of A-Site La-Substitution in Bismuth Ferrite1
Theoretical and Experimental Studies on Ultraviolet Nanosecond Laser Micromachining of Sapphire1
Optical and Thermal Properties of 2-inch Nd 3+ , Mg 2+ Co-doped Near Stoichiometric Lithium Niobate Crystal1
Reliability of Friction and Wear Characteristics of Surface-Strengthened Iron-Based Powder Metallurgy Materials1
Mechanical Behavior Analysis of Double-Layer Graphene Based on Football and Meshless kp-Ritz Method1
Structure and Properties of Low Dimensional FeTe Nano Materials under High Pressure1
Synthesis of Lithium Silicon Vanadium Oxide by Solid-State Reaction with Microwave-Assisted Method and Electrochemical Characterization1
Temperature-Dependent Crystal Structure and Physical Properties of BiFeO3Bulk Ceramics1
Effect of Heat Treatment on Microstructure and Properties of Fe-Nb-C Alloying Layer1
Effect of Dy3+ Substitution on Structural and Dielectric Properties of 0.8BaTiO3-0.2Bi0.5K0.5TiO3 Lead Free Ceramics1
Detection and Tracking of Safety Helmet in Construction Site1
Pr3+-Doped Ba-Na-B Glasses: Luminescence and Judd–Ofelt Analysis for Photonic Applications1
Machining Stability Research of Soft-Brittle Crystals Lapping by Fixed-Abrasive Pad1
Physical, Optical and Luminescence Properties of Pr3+ Doped in Lanthanum Borate Glasses1
Comparative Hybrid Hartree-Fock-DFT Calculations of ReO3, SrTiO3, BaTiO3, PbTiO3 and CaTiO3 (001) Surfaces1
Preparation and Luminous Performance of Ternary Complexes of Rare Earth Europium (III)1
3D Self-Supported NiS2/Ti3C2Tx-CC Composite Electrode for High-Performance Flexible Supercapacitors1
Growth, Structure and Thermal Properties of LuGdVO 4 Mixed Crystal1
Preparation and Performance of a Box-Type Bending Piezoelectric Transducer1
Optimization of Milling Tool Parameters and Experimental Research on Titanium Alloy TC111
Study on the Ball-End Milling Cutter Design and the Performance of Milling SiCp/Al1
Vibration Compaction Characteristics of High-Strength Iron Wire-like Carbon Nanotubes in Road Materials1
The Wear Resistance Characteristics Analysis of the Ball-End Milling Topography Surface1
Influence of Fe2O3 Doping Levels on the Phase Evolution, Microstructure, Electrical and Magnetic Properties of Ba0.97Ca0.03Ti0.94Sn0.061
Research on Cloud Platform Software Aging Prediction Method Based on VMD-ARIMA-BilSTM Combined Model1
Tribological Properties of Lubricating Grease Additives Made of Silica and Silicon Carbide Nanomaterials1
The Radioluminescence Investigation of Lead Sodium Borate Glass Doped with Eu3+1
Toroidal Resonance Tunability in THz Metamaterial Based on Perovskite1
Improved Electrochemical Performances of LiFePO 4 ·Li 3 V 2 (PO 4 1
Effect of Al2O3 nano-particles on Ba(Zr0.95Ti0.05)O3 ceramics prepared by mixed oxide method1
Modeling for Efficiency Enhancement of Perovskite Thin-Film Solar Cell by Using Double-Absorber and Buffer Layers1
Design and Fabrication of PVDF Based Flexible Piezoelectric Vibration Energy Harvester1
Effect of Rare Earth La on the Microstructure, Mechanical Properties, Electrical Conductivity, and Corrosion Behavior of an As-Cast Al-0.5 wt%Fe Aluminum Alloy1
Research on Forming Quality and Microstructure of Laser-MIG Hybrid Welded Joint of Invar Steel1
High Temperature Dielectric Relaxation Properties of SrTiO3-Zn2SnO4 Composite Ceramics1
A Novel Approach for Identification of Lithium-ion Battery Equivalent Circuit Model Parameters Based on Multi-dimensional Adaptive Feedback Regulation1
Study of Fabrication on Sponge Aluminum by Investment Casting1
Effect of Rare Earth Nd3+ Doping on Electrical Properties of Citrate - Gel Synthesized Ni-Zn Nanoferrites for High Frequency Applications1
Discussion on the Value of Nanomaterial Strength during the Renovation and Strengthening of Ancient Wooden Structures1
Effects of the Heating-up Atmosphere on the Nucleation of Graphene on Copper Foils1
Magnetic Sensor-Based Switching Cabinet Busbar Current Measurement Method1
Triboelectric Nanogenerator Prepared from Poly(vinylidene Fluoride-Hexafluoropropylene) Polymer Composite1
Preparation of YbVO 4 by Sol-Gel Method and Its Photocatalytic Activity1
Application of Multifunctional Nanomaterials Combined with Sports Rehabilitation Training in the Diagnosis and Treatment of Cardiovascular Diseases1
Studies on the Performance of Granular Cement Mixed with Nanomodified Materials1
Study of the Surface Plasmon Refractive Index Nanosensor Based on Fanoresonance1
High Performance Flexible Tribo/Piezoelectric Nanogenerators based on BaTiO3/Chitosan Composites1
Inhibition of Gas Explosion by Nano-SiO2 Powder under the Condition of Obstacles1
Phosphorescence and Tarnish Resistance Properties of Copper with Strontium Aluminate Addition1
Solid-Phase Synthesis and Screening of Functional Peptides and Their Inhibitory Effects in Cancer Cells1
Photolithographic Fabrication of Planar On-Chip Micro-Supercapacitors Based on Aminated Graphene Quantum Dots with Comprehensive Electrochemical Performance1
0.06816291809082